Hello everyone,
Please devs if you can move this thread to LG section,thanks
I need to flash patched boot image from magisk to this phone,but the problem is i cannot enter into fastboot mode and to unlock bootloader either.
Need some advices.
Cheers.
How i patch the boot image? I recently unlocked the OEM, this means that the bootloader has been unlocked, right?
ImTheHackerman said:
How i patch the boot image? I recently unlocked the OEM, this means that the bootloader has been unlocked, right?
Click to expand...
Click to collapse
ImTheHackerman said:
How i patch the boot image? I recently unlocked the OEM, this means that the bootloader has been unlocked, right?
Click to expand...
Click to collapse
yes
Hey guys, I have a k41s that I dawngrade to Android 9, and I can go into recovery (default) I was surprised = at the possibility of fleshing files via SD Card aply update, but I don't have any knowledge, I think that should be an easy one for you haha, if you can indicate some flesheavel file to save the whole population of k41s android 9  obd
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
guys forgive me, if the translator is a little bad. i'm with k41s i've rooted with the xda tutorial here, and i divulge this method, through two channels on yt and telegran. as there is no twrp for this model, I'm trying to install GSI roms, s the photos I post here are from the phh leneage OS, they install but even though the smartphone was formatted before it gets stuck in the password screen, I got these photos, unlocking , temporarily the frp by a technical assistance box program, we can only make modifications through mtkclient with celualr in BROWN mode, there is no adb fastboot, to start the android, if anyone can help me, please, if you have developers to manufacture twrp, my group and I are here to test, smartphone model k41s LM-K410 bmw, android 10 mtk 6765 arm32-binder64 vndk A/B,,
[email protected] said:
no we don't know how to flash files. zip on mtk client only img files
Click to expand...
Click to collapse
adm
could someone put this post on the list of the k41s? please
for all the controls the celualr disconnected and pressed the keys before by pressing the cable,
I do not know if you guys so able to read, I learned a lot from this forum, and everything I learned, helped me install this rom, and I'm using the translator, if you want to edit and fix, feel free..
phh rom gsi android 12,
stock rom 9 was already with root,
I clean op_a product_a and system_a, with the command;
py mtk e op_a,product_a,system_a enter .
on k41 has no fasboot I used BROWN mode with the mtkclient folder
removes the cable and leaves it off, the second command:
py mtk w vbmeta_a,system_a vbmeta.img.empty,leneapp.img
for all commands, six knows that the command already has to ta running on cmd, and after preciingvolume - and Google acistente with the celualr off, puts the cable..
after the second command, the cmd will load up to 100 and go back to the mtkclient folder, restart celualr do not enter format data or format by ae if not the loop.
will reboot and go to a password screen.
miss the password several times and the system will format and restart, when restarting does not take long, it will already eata on the home screen, without needing to configure the start.
wifi, connections all working videos on yt ok, to record audio it's buggy,
it will restart a few times after it has started, more later for kk
see root tutorial for k41s
because for the cmd to work it needs
of phyton3
and from the mtkclient folder.
[email protected] said:
clean first with command
py mtk and op_a,system_a,product_a enter
if yours is a, a, if it's b, b
and install the rom on the system_a partition
py mtk w vbmeta_a,system_a a space vbmeta.img.empty,leneapp.img
the commas for vbmeta and system and a space to indicate the img, rename the rom to leneapp to make it easier for me kk
the rom is on the arm32-binder64google apps architecture
Click to expand...
Click to collapse
if same know how to instal, twrp pleasse post
I cant belive. I was find how enter in fastboot to install 12 and e found this!!
[email protected] said:
adm
could someone put this post on the list of the k41s? please
for all the controls the celualr disconnected and pressed the keys before by pressing the cable,
I do not know if you guys so able to read, I learned a lot from this forum, and everything I learned, helped me install this rom, and I'm using the translator, if you want to edit and fix, feel free..
phh rom gsi android 12,
stock rom 9 was already with root,
I clean op_a product_a and system_a, with the command;
py mtk e op_a,product_a,system_a enter .
on k41 has no fasboot I used BROWN mode with the mtkclient folder
removes the cable and leaves it off, the second command:
py mtk w vbmeta_a,system_a vbmeta.img.empty,leneapp.img
for all commands, six knows that the command already has to ta running on cmd, and after preciingvolume - and Google acistente with the celualr off, puts the cable..
after the second command, the cmd will load up to 100 and go back to the mtkclient folder, restart celualr do not enter format data or format by ae if not the loop.
will reboot and go to a password screen.
miss the password several times and the system will format and restart, when restarting does not take long, it will already eata on the home screen, without needing to configure the start.
wifi, connections all working videos on yt ok, to record audio it's buggy,
it will restart a few times after it has started, more later for kk
see root tutorial for k41s
because for the cmd to work it needs
of phyton3
and from the mtkclient folder.View attachment 5494871
Click to expand...
Click to collapse
App banks works on this rom?
And thank you very much for this amazing work
[email protected] said:
py mtk w vbmeta_a,system_a vbmeta.img.empty,leneapp.img
Click to expand...
Click to collapse
Where is the vbmeta.img? Ir is a blank file?
Predro said:
Where is the vbmeta.img? Ir is a blank file?
Click to expand...
Click to collapse
inside the folder, mtkclient, it has a vbmeta.img file by default
Hi, any twrp for lg k41s?
Androi100 said:
yes
Click to expand...
Click to collapse
I've another phone with same problem, but bootloader isn't unlocked even doing the same thing. I cannot flash nothing because phone fastboot is disabled and from edl it check signature so is unuseful even if bootloader is unlocked, is like is locked.
Another thing, you can use some tools to develop twrp like philz auto recovery porter or twrp auto recovery porter by hovatek
Hello everyone! i managed to make a twrp for the lg k41s android 10 p22 arm32-binder 64, model bmw. I downloaded version 3.5 of twrp tipalia. I followed a tutorial here on the forum. I merged and edited the boot_a files, used fstab.recovery, unevent, among others. I installed the new twrp on the boot_a partition, it didn't boot into systema, it just rebooted when asked, and it went back to twrp. I edited the data and system paths, something like this, dev/block/platform/bootdevice/by-name/system and then system_a. I'm lost kkkkk if anyone can point me to solutions.
this is the file of the qui twrp did. i installed it by mtkclinte in BROWN mode.
kkkk I used the magisk zip, an aik-mobile kitchen, to open the boot. if I knew a way, to edit the twrp and by along with the boot files, I believe it would not be a problem to start the partitions, if that is the error.
Predro said:
Where is the vbmeta.img? Ir is a blank file?
Click to expand...
Click to collapse
in the foulder mtkclient. is one arquive of the folder. Kkkk
Skorpion96 said:
I've another phone with same problem, but bootloader isn't unlocked even doing the same thing. I cannot flash nothing because phone fastboot is disabled and from edl it check signature so is unuseful even if bootloader is unlocked, is like is locked.
Another thing, you can use some tools to develop twrp like philz auto recovery porter or twrp auto recovery porter by hovatek
Click to expand...
Click to collapse
but to use the hovatek tool, it requires you to have the recovery file, and the k12 up to k61 has no recovery partition to pull.
I managed to port the twrp by editing the boot of the k41s, but the systema does not start, ppr that the practically the twrp is on the boot partition
because I have no recovery partition, would have how I merge the twrp in boot, so that the boot could start the partitions?
já que eu não tenho ajuda dos gringos, pra querer escrever em outra língua .
Eu consegui fazer, um twrp, um cwm, e por último, o recovery da leneage bootar no k41s. o k41s melhor, a linha k12 ao k61 não possui recovery. eu consegui inatalar o cwm eo recovery da lineage editando o arquivo boot, o cwm depois de limpar a data, não inicia no systema, so reinicia em recovery. o twrp a mesma coisa. depois que é formatado a data pelo twrp, o sistema pede uma nova formatação pelo próprio sistema, e essa formatação do systema limpa a instalação do twrp. como se fosse preciso um arquivo de criptografia pro twrp. vamos ver o que essa recuperação diz depois do wipe. Mas de qualquer maneira, não da pra fazer muita coisa com ele, não tem opção de instalar zip, a nao ser pelo sidloade quebrado.
Mod translation via GT:
since I don't have any help from the gringos, to want to write in another language .
I managed to do, a twrp, a cwm, and finally, the recovery of the leneage bootar in the k41s. the k41s is better, the k12 to k61 line has no recovery. I managed to inatatar the cwm and the recovery of the lineage by editing the boot file, the cwm after clearing the data, does not start in the system, only restarts in recovery. the twrp the same thing. after the date is formatted by twrp, the system asks for a new formatting by the system itself, and this formatting of the system cleans the installation of twrp. as if you need an encryption file for twrp. let's see what this recovery says after the wipe. But anyway, you can't do much with it, there's no option to install zip, except for the broken sidloade.
Related
I have something here today that will blow the socks off of the people here that own a Zenfone 3 Max and have wanted to root their device.
First of all, this is my first post here. Second of all, I can not be held responsible for anything that happens to your device during installation or anything that happens as a result (global thermonuclear war, getting fired because your alarm doesn't work, etc.) Lastly, I would like to credit the developer of Magisk, topjohnwu and the guy on Zentalk that found this, ukolino.
ASUS attempted to push a bootloader unlock for this phone through a bootloader unlocker on their website, but they failed miserably as the tool would simply reboot the phone and do nothing else. When checking the lock status through ADB, it was always locked.
I will go ahead and explain the procedures I went to in order to get to this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. I don't know if this influences the results or not, but I did run the bootloader unlock tool from ASUS previously. I didn't have it installed at the time of installing Magisk. The download for the .apk can be found at https://www.asus.com/us/Phone/ZenFone-3-Max-ZC520TL/HelpDesk_Download/
2. While you are on ASUS' website, you are going to need the firmware for the region model of your phone. Mine is a US, so I used the US firmware. If you don't know what region model your device is, you can find it by going to settings--> system updates --> build number. Mine says NRD90M.US_Phone-14.... While this is downloading, proceed to the next steps.
3. You are obviously going to need ADB for this. If you have the Android SDK, that works. I am using Minimal ADB and Fastboot and seriously suggest it over the giant SDK if you just need ADB and Fastboot.
4. Next, you are going to need Magisk Manager. It can be found at http://tiny.cc/latestmanager . If you want to read up more about Magisk, you can go to https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
5. Install Magisk Manager like any old .apk.
Now you must wait for your firmware to finish downloading from ASUS.
6. Now that your download is finished, you will need to open the .zip. Inside the zip is a bunch of files, one being boot.img. You will need to extract it. All that wait for a 9mb file....
7. You will need to move the boot.img to your phone through traditional means.
8. You will now use the Magisk Manager you installed earlier to make a modified boot image out of the stock one you just extracted. In Magisk, you need to press install, install again, patch boot image file, and navigate to the area where you stored the boot.img.
9. After selecting your boot.img, a terminal-esque window will pop up and if all goes well, it will drop a modified boot.img named patched_boot.img in (Main Storage)--> MagiskManager. Move this to your PC in an easy to locate space. I put mine at C:/android.
10. Now comes the scary stuff; ADB. I am not too experienced with ADB, so any extraneous problems encountered here may require a Google search. Make sure you have USB debugging enabled in Developer Options. Your phone will need to be connected to the PC for the rest of the process.
11. In an ADB prompt, you will need to put your phone into bootloader mode by keying in:
Code:
adb reboot-bootloader
12. Your phone will soon reboot and will be in bootloader mode. This is where things get modified and you may want to pray to whatever higher being you believe in that this works and doesn't brick your device. You can ensure that your phone is in the right mode by typing
Code:
fastboot devices
. After this, you can type
Code:
fastboot flash boot c:/android/patched_boot.img
. Replace c:/android with the path of the place that you put the patched_boot.img from Magisk.
13. It should take no time at all (mine took a total of 0.993 seconds), and after it is finished, you can go ahead and reboot with the buttons or you can type
Code:
fastboot reboot
. Your phone should reboot regularly and won't look any different.
14. Open up Magisk Manager again. It should say that you're rooted. If it does, congratulations, you have systemless root! If it doesn't, try again. If it doesn't fix it then, reply and I'll look into it.
15. (optional) In the hamburger menu, there is a place called downloads. It contains such beauties as Xposed Framework and ViPER4Android FX. Since there's no custom recovery involved, you can't flash anything, but you can still use root-enabled apps with ease!
I believe I covered all of the bases here, but if I didn't, please feel free to reply with any questions and I'll do my best to answer them.
Cheers!
U can use flasfire to flash any zip you want.
So you were able to root using Magisk without unlocking bootloader, thats awesome. I unlocked my friends phone for the same.
tried on zc553kl zenfone max, it does not work, it does not boot.
Sorry for the stupid question.
sorry the question idiot else has not even a file or something like boot.img in the zip file what would the file be? would have a magisk installation tutorial via adb / fastboot this is my first zenfone aff longing for samsung already :crying:
I have followed the instruction and everything seems to work okay except after the fastboot reboot Magisk manager is stuck on the loading screen with the mask and after about a minute it crashes. and apps that require root dont work
You're a ****ing genious men! Thank you! Too much! <3
After i rooted the device (thanks so much), i installed viper4android. Then, i tried to install xposed framework (all from the hamburguer menu). The xposed never showed or installed (i cant find id) and messenger and facebook apps keep crashing and crashing. I tried to uninstall them, without any app, and nothing. Also, the overall performances is a lit bit slow than before. Well quite slower. Any ideas? Thanks in advance.
Thank you. You are a genius!
I realized that the Asus tool did not unlock the bootloader, so I could not perform the ROOT by SP Flash Tools or anything like that.
The command in ADB "fastboot flash recovery recovery ...... twrp.img did not work either.
But once thanks, I'm going to record a video in PT BR for the Brazilians and thank you.
PT BR
Obrigado. Você é um gênio!
Eu percebi que a ferramenta da Asus não desbloqueava o bootloader, então eu não conseguia realizar o ROOT pelo SP Flash Tools ou alguma coisa desse tipo.
O comando no ADB "fastboot flash recovery recovery......twrp.img não funciovava também.
Mas uma vez obrigado, vou gravar um vídeo em PT BR para os brasileiros e agradeço a você.
Thanks again. I make a details guide and a video. Please, see https://forum.xda-developers.com/zenfone-3/how-to/how-to-root-zenfone-3-max-zc520tl-t3685835
recovery play to function
Someone knows how to recover the mirror smart tv play to function of this cell phone ZC520TL???.
alexandroid81 said:
Someone knows how to recover the mirror smart tv play to function of this cell phone ZC520TL???.
Click to expand...
Click to collapse
I think you own the ZC520TL with the mediatek MT6737 (I own the same).
This is a well known issue with this model, no play to(screen mirroring) default feature and no full HD videos.
The lucky one who owns the MT6737T they have play to and full HD videos, since the hardware is the same Asus sold to some unlucky users this poorest version.
At moment there is nothing you can do, may be (if you are rooted) there is a xposed moduel to do it...
By the way if the device is on the same wLan of a smart tv you can pair them.
Asus officially say that this device it is not designed for screen mirroring(it's a lie they just haven't optimized the software for the MT6737 processor), but if you want try to protest...
Dude this is amazing!!!!!! I will reposting this thread everywhere someone asks where to unlock the zc520tl. I can finally run air audio and stream spotify to my hi-fi. You don't know how happy you've made me.
I'd also like to add that I needed to run the asus bootloader unlocker for this to work, if you don't it'll give an error when trying to flash the patched boot.
xposed
xposed framework bricked my phone when i installed it through magisk
edit: fixed it by installing default firmware from sd on that awful default recovery
MezzaLuna said:
I think you own the ZC520TL with the mediatek MT6737 (I own the same).
This is a well known issue with this model, no play to(screen mirroring) default feature and no full HD videos.
The lucky one who owns the MT6737T they have play to and full HD videos, since the hardware is the same Asus sold to some unlucky users this poorest version.
At moment there is nothing you can do, may be (if you are rooted) there is a xposed moduel to do it...
By the way if the device is on the same wLan of a smart tv you can pair them.
Asus officially say that this device it is not designed for screen mirroring(it's a lie they just haven't optimized the software for the MT6737 processor), but if you want try to protest...
Click to expand...
Click to collapse
I went to the ASUS page and I failed miserably when trying to protest they only apologize for buying their trash I'm tired of their bad service and I'm about to throw my phone in the trash believe me there will be no solution whatsoever that I have left is to modify the android just tell me what I can do
Hey thanks for this. Can I still get System Updates from ASUS after doing this? If yes, then will I have to do this everytime an update comes?
Edit: Looks like it won't, but I can still manual update right?
Sent from my Asus ZenFone 3 Max using XDA Labs
Zc520tl x008d
Thanks, does this work on ZC520TL X008D with MT6737 M and 13.1.0.56-2017-03.26 WW firmware?
tritekstyn said:
xposed framework bricked my phone when i installed it through magisk
edit: fixed it by installing default firmware from sd on that awful default recovery
Click to expand...
Click to collapse
Hey can you tell me how you unbricked your phone? mine is currently bricked.
Thx
Hello guys. The CMD is showing "waiting for device" after inserting the command "fastboot flash boot d: /asus/patched_boot.img".
What do I do? I even switched cable usb.
HoMsEy-4-LiFe said:
Hey can you tell me how you unbricked your phone? mine is currently bricked.
Thx
Click to expand...
Click to collapse
as i said in the edit i installed the stock firmware zip from sd card in the stock recovery mode
How about mt6737v, I have US version,thx so much
I saw a guy with a problem to do a downgrade after done some things in his ZD553KL and I decided to help with a tutorial about how to reset a Asus Zenfone 4 Selfie to its original state. OBS: I am from Brazil and sorry if my english turn into a trash kkkk (you all have a brain and are capable of understand my words kkkk).
First - Be sure that you have the ADB and Asus drivers installed. Download the "stock rom of ZD553KL"
ADB Drivers: http://www.mediafire.com/file/cc ... fastboot_v1.4.3.zip
ZD553KL room: https://drive.google.com/open?id ... DXbL_sHr7FK22XsGfW8
Second: Extract the room file to a simple past name and directory like : C:\Zenfone. Avoid put into something complex like the original folder name C:\[up_vnROM.net]_WW_ZD553KL(ZB553KL)......
Okay... lets do it finally
Put your ZD553KL into fastboot mode (press volume - and power button at same time and after appears the message "fastboot mode!!!" you can connect your usb phone on (in?) your computer.
Go inside the room folder and find the .cmd file "flashall_AFT.cmd" and run or open it and wait until it finish. OBS: if the cmd file stop just press some key in your keybord that it will keep going.
OBS2: If the .cmd file does not open, you had to extract again the file and verify if you phone and adb drivers are okay and if the files are in a simple directoy as I said.
Hope have help you.
mano sou um brasileiro fudido tambem passei a rom tudo certinho , mas o celular ainda preso na tela da asus
I need root on my Cubot Note 20, but I can't figure it out
1) This guide soft-bricks my device: https://www.ayudaroot.com/root/rootear-cubot-note-20/ (so don't follow this tutorial if you are a Cubot Note 20 owner !!!)
2) At least there's a decent unbrick guide officially from CUBOT: https://cubot.net/platform/Support/detail/id/406/cid/30.html
3) Then I tried patching the boot.img with Magisk and flashing it with SP_Flash_Tool (like in step 2 - just with the boot.img file replaced) --> but that gives some signature failiure on boot --> bootloop again
So now my device is unbricked for the second time But I really need OTG and it's only possible to enable it when I'm rooted...... Can someone please help me?
I am to dumb to figure out how to post a new thread on here. However after much research, trial and error I have discovered how to root this properly!!!
WARNING after root. DO NOT RESTART PHONE UNTIL YOU RENAME "recovery-from-boot.p" FOUND UNDER /SYSTEM
***CUBOT NOTE 20 PRO***
Enable Developer Options In Android 10
Head over to the Settings app of your device via the notification shade or app drawer.
Scroll down and tap on ‘About phone.’
Find an entry labeled ‘Build number.’ Keep on tapping until you see a prompt that says ‘You are now a developer!’. You will be prompted to enter your device’s unlock code (PIN/Pattern/Password) at this point
Next go to Settings -> System -> Advanced -> Developer Options
Tap the slider on "OEM Unlocking" and "Enable USB Debugging"
Extract the attached file
Install MTKdriver.exe
plug phone into computer. Windows SHOULD install drivers for adb automatically
run file "flash - root.bat"
you are rooted.
***ANY CUBOT PHONE***
Follow directions provided by Magisk to root boot.img
Cubots has a BOOT.IMG VERIFICATION IMAGE!!!! .........
Flash the boot image with fastboot as directed
download "vbmeta(root).img"
put in folder with fastboot
run code - fastboot flash vbmeta vbmeta(root).img
**********DO NOT BLAME ME FOR FAILURE USE AT YOUR OWN RISK************
gosh please someone help me i did the instructions and my phone is bricked how can i fix it?
ConverterDreamer said:
gosh please someone help me i did the instructions and my phone is bricked how can i fix it?
Click to expand...
Click to collapse
thank God it works again xd and its rooted now
Owners of Cubot Note 20 Pro: does your phone support dual frequency (L5/E5) GPS?
Can be verified with this opensource app: https://play.google.com/store/apps/details?id=com.android.gpstest
Text L5 or E5 in "CF" column means dual freq is supported.
We need a new thread started on this phone with topics such as rooting and custom Roms.Not only does it come with a removable battery but it has a huge battery and ram.We desperately need some experienced developers to look help out.
Hey guys!
I finally managed to root my brand new Cubot Note 20 not with Magisk Manager but with adb + fastboot downloaded from this link: https://www.getdroidtips.com/flash-...all_the_Patched_Boot_Image_on_MediaTek_device.
Extracting the boot.img and reinserting this same patched.img sorry for the bad explanation, it's just to give an orientation. Extracting the boot.img and reinserting this same patched.img sorry for the bad explanation,.Now Titanium is already running on my terminal and removing the Gapps. Happy!
jediroadkilk said:
I am to dumb to figure out how to post a new thread on here. However after much research, trial and error I have discovered how to root this properly!!!
WARNING after root. DO NOT RESTART PHONE UNTIL YOU RENAME "recovery-from-boot.p" FOUND UNDER /SYSTEM
***CUBOT NOTE 20 PRO***
Enable Developer Options In Android 10
Head over to the Settings app of your device via the notification shade or app drawer.
Scroll down and tap on ‘About phone.’
Find an entry labeled ‘Build number.’ Keep on tapping until you see a prompt that says ‘You are now a developer!’. You will be prompted to enter your device’s unlock code (PIN/Pattern/Password) at this point
Next go to Settings -> System -> Advanced -> Developer Options
Tap the slider on "OEM Unlocking" and "Enable USB Debugging"
Extract the attached file
Install MTKdriver.exe
plug phone into computer. Windows SHOULD install drivers for adb automatically
run file "flash - root.bat"
you are rooted.
***ANY CUBOT PHONE***
Follow directions provided by Magisk to root boot.img
Cubots has a BOOT.IMG VERIFICATION IMAGE!!!! .........
Flash the boot image with fastboot as directed
download "vbmeta(root).img"
put in folder with fastboot
run code - fastboot flash vbmeta vbmeta(root).img
**********DO NOT BLAME ME FOR FAILURE USE AT YOUR OWN RISK************
Click to expand...
Click to collapse
Gulpiyuri said:
Hey guys!
I finally managed to root my brand new Cubot Note 20 not with Magisk Manager but with adb + fastboot downloaded from this link: https://www.getdroidtips.com/flash-...all_the_Patched_Boot_Image_on_MediaTek_device.
Extracting the boot.img and reinserting this same patched.img sorry for the bad explanation, it's just to give an orientation. Extracting the boot.img and reinserting this same patched.img sorry for the bad explanation,.Now Titanium is already running on my terminal and removing the Gapps. Happy!
Click to expand...
Click to collapse
Need help in finding a working recovery for the Cubot Note 20 Pro. After root I tried flashing the Twrp version 3.4.0-by nemo-nemo and it just stays on the TWRP splash screen. Ive also tried other TWRP versions and recovery's like orange fox but with no luck. I was hoping that someone with more expertise could help in some way.
elimoviebuff said:
Abbiamo bisogno di un nuovo thread avviato su questo telefono con argomenti come rooting e ROM personalizzate. Non solo viene fornito con una batteria rimovibile, ma ha una batteria e un'enorme RAM. Abbiamo un disperato bisogno di alcuni sviluppatori esperti che cercano aiuto.
Click to expand...
Click to collapse
Qualcuno può aiutarmi con la connessione hotspot con cubot 20 note pro ? La uso per connettermi con il mio PC e ogni volta vedo che ci sono utenti sconosciuti connessi alla mia rete . In questo telefono non vi è modo di vedere chi sia , né di impostare il numero di utenti max connessi. Ho cercato di reperire notizie ovunque, persino all'assistenza (inesistente) del produttore. Helppppp!!
[Root] How i can root my Cubot X30?
Hi. I don't find any good information on the internet about root this Smartphone: CUBOT X30
Anyone can help me?
I already tried some tutorials of the internet but... don't work.
Thanks.
What have you tried so far?
Unofficial TWRP Recovery for Cubot X30 | Root Your Phone
In this guide, we will help you to install TWRP Recovery on the Cubot X30 device. This guide contains both the written instruction and video
www.getdroidtips.com
unofficial twrp 3.4.0 Root Cubot X30 - unofficial twrp
download unofficial twrp 3.4.0 root Cubot X30, user who own Cubot X30 can root it by following the below instructions
unofficialtwrp.com
How to Root Cubot X30 and Install TWRP Recovery 3.4.2
Easy tutorial to Root Cubot X30 Smartphone in easy steps. For rooting, you have to flash TWRP Recovery 3.4.2 first through the guide.
www.androidweblog.com
Cómo hacer root en el teléfono móvil Cubot X30
Si por alguna cuestión (podrían ser muchas) deseas hacer root a tu Cubot X30, estás de suerte puesto que a continuación te enseñaremos una metodología muy sencillo y eficiente para hacerlo de forma…
www.ayudaroot.com
I don't know if anyone has found a solution, but I have successfully rooted my X30. Before I begin, I am NOT responsible for ANY damage incurred by following these instructions.
Here's what I did:
1) Unlock bootloader-
This is pretty easy on the X30. You need to have adb and fastboot installed. In a terminal (for Linux, which is what I use) or command prompt (for Windows) type: adb reboot bootloader. Once in bootloader, type: fastboot flashing unlock. on your phone (the print is really small) use the volume rocker to choose to unlock. Oh, before i forget, backup anything you want to keep as this will wipe the phone.
2) Boot the phone up, sign in, and search for magisk manger for android. Download and install it.
3) Download the boot image I have attached (it is the stock image for the X30).
4) Place the image on the root of your sd card or internal storage.
5) Open magisk manager and touch install (the one at the top, as there are two). Next tick the circle next to "Select and Patch a file. Choose the boot image you downloaded from here and magisk will do the rest.
6) Now boot it back into the bootloader (adb reboot bootloader).
7) Once in bootloader, type: fastboot flash boot magisk.img. Reboot phone (fastboot reboot).
8) After the phone is booted open Play Store and download root checker. Once it's downloaded open it and check for root. You should see a prompt asking for you to grant root access. touch "Grant" and it will respond and tell you have root access!
ironsa said:
I don't know if anyone has found a solution, but I have successfully rooted my X30. Before I begin, I am NOT responsible for ANY damage incurred by following these instructions.
Here's what I did:
1) Unlock bootloader-
This is pretty easy on the X30. You need to have adb and fastboot installed. In a terminal (for Linux, which is what I use) or command prompt (for Windows) type: adb reboot bootloader. Once in bootloader, type: fastboot flashing unlock. on your phone (the print is really small) use the volume rocker to choose to unlock. Oh, before i forget, backup anything you want to keep as this will wipe the phone.
2) Boot the phone up, sign in, and search for magisk manger for android. Download and install it.
3) Download the boot image I have attached (it is the stock image for the X30).
4) Place the image on the root of your sd card or internal storage.
5) Open magisk manager and touch install (the one at the top, as there are two). Next tick the circle next to "Select and Patch a file. Choose the boot image you downloaded from here and magisk will do the rest.
6) Now boot it back into the bootloader (adb reboot bootloader).
7) Once in bootloader, type: fastboot flash boot magisk.img. Reboot phone (fastboot reboot).
8) After the phone is booted open Play Store and download root checker. Once it's downloaded open it and check for root. You should see a prompt asking for you to grant root access. touch "Grant" and it will respond and tell you have root access!
Click to expand...
Click to collapse
I try that but when it brings me to bootloader and i type fastboot flashing unlock it says wating for device in CMD anything you can do to help ?
shady6 said:
I try that but when it brings me to bootloader and i type fastboot flashing unlock it says wating for device in CMD anything you can do to help ?
Click to expand...
Click to collapse
hello, i have the same problem. have you managed to solve this problem?
Disclaimer
These kind of modifications are not for the faint of heart!!! Flash/modify at your own risk!!! I will not be responsible for bricked phones, Dead batteries, world war 3, yada yada yada..... you Know the Rest.
Click to expand...
Click to collapse
Introduction
After finding this amazing device (LKM-EMW) for a very cheap price (90 euros new), I made the fatal mistake of updating through OTA to the Latest Android 10 version 00f.
So where is the Problem?? The latest .DZ from the KDZ firmware wasn't extractable through any tool or script I could find anywhere online, Only the Android 9 ROM was working, but Downgrading through LGUP or LG Flash tool was very risky!!!! (due to ARB protection).
Since this phone's Fastboot mode was replaced with LG's own DOWNLOAD mode, using Fastboot commands to flash the Magisk's patched boot image was impossible. QFIL was also not a possibility, Considering it ships with a MTK chipset, and using SP flash tool will require This phone's particular Scatter file and a signed DA from LG to work, leaving me with no other choices for obtaining Root access.
That is, until I found the following tool: mtkclient by bkerler.
Prerequisites
backup of your DATA. (during and after unlocking the Bootloader, your data partition must be wiped!!!!)
Preferably a Windows PC (you will need LGUP in case something goes wrong anyways).
MTK ALL-in-one 1.0.8 drivers and LG's drivers installed.
mtkclient installed and running (don't ask me how-to, the Github page is pretty self explanatory).
This Magisk Alpha Build patched for MTK downloaded for installation.
Since this device uses an A/B partitioning system, you need to know which slot is the active one. Using this App, under the System tab, you can find out which one is active. Mine was _b slot.
and above all.... Patience.
Unlocking the Bootloader
(please note, using python [command] didn't work for me for some reason. However, using py [command] worked for me. Use what works!)
Turn on OEM Unlocking and USB Debugging in Developers Options.
Turn off your phone and remove sim/sdcard.
launch cmd inside the mtkclient folder or cd into it.
backup your Preloader by using: py mtk dumppreloader --filename=preloader.bin.
connect your phone turned off while holding the Volume Down + the Assistant buttons to boot into BROM mode. The Preloader backup will run automatically.
After it's complete, disconnect your device's cable. You will need to do this after every step.
Run the command: py mtk e metadata,userdata and connect while holding the button combo. Wait for it to complete.
Disconnect again, then run: py mtk xflash seccfg unlock and reconnect.
If successful, your device's Bootloader is now unlocked!!!
Rooting
Knowing which active slot you're booting into will change the next steps slightly. If it's _a, then all following commands will have an _a instead of _b .
Before rebooting after unlocking, use the command: py mtk r boot_b,vbmeta_b boot_b.bin,vbmeta_b.bin to backup your boot and vbmeta partitions respectively. (you will find them in the mtkclient folder afterwards!!)
reboot your phone. a warning screen will show up, don't panic!!!. It will ask you to Factory reset the phone upon successfully booting. Do it and reboot.
Setup your phone normally, then install the aforementioned Magisk APK.
Transfer the backed up boot.bin to your phone and patch it manually inside Magisk.
Transfer the Patched boot image back to your mtkclient folder and rename to i.e boot_magisk.bin.
Turn off your device and launch the command: py mtk w boot_b,vbmeta_b boot_magisk.bin,vbmeta.img.empty. Connect the phone.
when done, reboot your phone and launch Magisk. It will ask you to reinstall itself to complete the setup. Ignore the warning.
Go to Settings and switch to the Beta Update Channel, Reinstall Magisk 23.0 beta and Magisk manager again.
If successful, Your phone is now rooted.
Passing SafetynetAPI
Turn on Magisk Hide and repack Magisk Manager from Settings.
Install latest Riru core from Manager.
Install this Universal Safetynet fix by kdrag0n.
reboot and enjoy!!
Credits for all of this goes to:
bkerler for his awesome Tool, none of this is possible w/o it.
Topjohnwu for Magisk.
@kdrag0n for his Safetynet fix.
Slim K said:
Disclaimer
Introduction
After finding this amazing device (LKM-EMW) for a very cheap price (90 euros new), I made the fatal mistake of updating through OTA to the Latest Android 10 version 00f.
So where is the Problem?? The latest .DZ from the KDZ firmware wasn't extractable through any tool or script I could find anywhere online, Only the Android 9 ROM was working, but Downgrading through LGUP or LG Flash tool was very risky!!!! (due to ARB protection).
Since this phone's Fastboot mode was replaced with LG's own DOWNLOAD mode, using Fastboot commands to flash the Magisk's patched boot image was impossible. QFIL was also not a possibility, Considering it ships with a MTK chipset, and using SP flash tool will require This phone's particular Scatter file and a signed DA from LG to work, leaving me with no other choices for obtaining Root access.
That is, until I found the following tool: mtkclient by bkerler.
Prerequisites
backup of your DATA. (during and after unlocking the Bootloader, your data partition must be wiped!!!!)
Preferably a Windows PC (you will need LGUP in case something goes wrong anyways).
MTK ALL-in-one 1.0.8 drivers and LG's drivers installed.
mtkclient installed and running (don't ask me how-to, the Github page is pretty self explanatory).
This Magisk Alpha Build patched for MTK downloaded for installation.
Since this device uses an A/B partitioning system, you need to know which slot is the active one. Using this App, under the System tab, you can find out which one is active. Mine was _b slot.
and above all.... Patience.
Unlocking the Bootloader
(please note, using python [command] didn't work for me for some reason. However, using py [command] worked for me. Use what works!)
Turn on OEM Unlocking and USB Debugging in Developers Options.
Turn off your phone and remove sim/sdcard.
launch cmd inside the mtkclient folder or cd into it.
backup your Preloader by using: py mtk dumppreloader --filename=preloader.bin.
connect your phone turned off while holding the Volume Down + the Assistant buttons to boot into BROM mode. The Preloader backup will run automatically.
After it's complete, disconnect your device's cable. You will need to do this after every step.
Run the command: py mtk e metadata,userdata and connect while holding the button combo. Wait for it to complete.
Disconnect again, then run: py mtk xflash seccfg unlock and reconnect.
If successful, your device's Bootloader is now unlocked!!!
Rooting
Knowing which active slot you're booting into will change the next steps slightly. If it's _a, then all following commands will have an _a instead of _b .
Before rebooting after unlocking, use the command: py mtk r boot_b,vbmeta_b boot_b.bin,vbmeta_b.bin to backup your boot and vbmeta partitions respectively. (you will find them in the mtkclient folder afterwards!!)
reboot your phone. a warning screen will show up, don't panic!!!. It will ask you to Factory reset the phone upon successfully booting. Do it and reboot.
Setup your phone normally, then install the aforementioned Magisk APK.
Transfer the backed up boot.bin to your phone and patch it manually inside Magisk.
Transfer the Patched boot image back to your mtkclient folder and rename to i.e boot_magisk.bin.
Turn off your device and launch the command: py mtk w boot_b,vbmeta_b boot_magisk.bin,vbmeta.img.empty. Connect the phone.
when done, reboot your phone and launch Magisk. It will ask you to reinstall itself to complete the setup. Ignore the warning.
Go to Settings and switch to the Beta Update Channel, Reinstall Magisk 23.0 beta and Magisk manager again.
Se for bem sucedido, seu telefone está agora enraizado.
Passing SafetynetAPI
Turn on Magisk Hide and repack Magisk Manager from Settings.
Instale o núcleo riru mais recente do Manager.
Instale esta correção Universal Safetynet por kdrag0n.
reiniciar e desfrutar!!
Créditos para tudo isso vai para:
bkerler for his awesome Tool, none of this is possible w/o it.
Topjohnwu para Magisk.
@kdrag0n for his Safetynet fix.
Click to expand...
Click to collapse
Slim K said:
Disclaimer
Introduction
After finding this amazing device (LKM-EMW) for a very cheap price (90 euros new), I made the fatal mistake of updating through OTA to the Latest Android 10 version 00f.
So where is the Problem?? The latest .DZ from the KDZ firmware wasn't extractable through any tool or script I could find anywhere online, Only the Android 9 ROM was working, but Downgrading through LGUP or LG Flash tool was very risky!!!! (due to ARB protection).
Since this phone's Fastboot mode was replaced with LG's own DOWNLOAD mode, using Fastboot commands to flash the Magisk's patched boot image was impossible. QFIL was also not a possibility, Considering it ships with a MTK chipset, and using SP flash tool will require This phone's particular Scatter file and a signed DA from LG to work, leaving me with no other choices for obtaining Root access.
That is, until I found the following tool: mtkclient by bkerler.
Prerequisites
backup of your DATA. (during and after unlocking the Bootloader, your data partition must be wiped!!!!)
Preferably a Windows PC (you will need LGUP in case something goes wrong anyways).
MTK ALL-in-one 1.0.8 drivers and LG's drivers installed.
mtkclient installed and running (don't ask me how-to, the Github page is pretty self explanatory).
This Magisk Alpha Build patched for MTK downloaded for installation.
Since this device uses an A/B partitioning system, you need to know which slot is the active one. Using this App, under the System tab, you can find out which one is active. Mine was _b slot.
and above all.... Patience.
Unlocking the Bootloader
(please note, using python [command] didn't work for me for some reason. However, using py [command] worked for me. Use what works!)
Turn on OEM Unlocking and USB Debugging in Developers Options.
Turn off your phone and remove sim/sdcard.
launch cmd inside the mtkclient folder or cd into it.
backup your Preloader by using: py mtk dumppreloader --filename=preloader.bin.
connect your phone turned off while holding the Volume Down + the Assistant buttons to boot into BROM mode. The Preloader backup will run automatically.
After it's complete, disconnect your device's cable. You will need to do this after every step.
Run the command: py mtk e metadata,userdata and connect while holding the button combo. Wait for it to complete.
Disconnect again, then run: py mtk xflash seccfg unlock and reconnect.
If successful, your device's Bootloader is now unlocked!!!
Rooting
Knowing which active slot you're booting into will change the next steps slightly. If it's _a, then all following commands will have an _a instead of _b .
Before rebooting after unlocking, use the command: py mtk r boot_b,vbmeta_b boot_b.bin,vbmeta_b.bin to backup your boot and vbmeta partitions respectively. (you will find them in the mtkclient folder afterwards!!)
reboot your phone. a warning screen will show up, don't panic!!!. It will ask you to Factory reset the phone upon successfully booting. Do it and reboot.
Setup your phone normally, then install the aforementioned Magisk APK.
Transfer the backed up boot.bin to your phone and patch it manually inside Magisk.
Transfer the Patched boot image back to your mtkclient folder and rename to i.e boot_magisk.bin.
Turn off your device and launch the command: py mtk w boot_b,vbmeta_b boot_magisk.bin,vbmeta.img.empty. Connect the phone.
when done, reboot your phone and launch Magisk. It will ask you to reinstall itself to complete the setup. Ignore the warning.
Go to Settings and switch to the Beta Update Channel, Reinstall Magisk 23.0 beta and Magisk manager again.
If successful, Your phone is now rooted.
Passing SafetynetAPI
Turn on Magisk Hide and repack Magisk Manager from Settings.
Install latest Riru core from Manager.
Install this Universal Safetynet fix by kdrag0n.
reboot and enjoy!!
Credits for all of this goes to:
bkerler for his awesome Tool, none of this is possible w/o it.
Topjohnwu for Magisk.
@kdrag0n for his Safetynet fix.
Click to expand...
Click to collapse
hello everyone, View attachment 5430177at the beginning the commands to unlock the bootloader, py (comand) = is to write py unlock bootloader?
[email protected] said:
hello everyone, View attachment 5430177at the beginning the commands to unlock the bootloader, py (comand) = is to write py unlock bootloader?
Click to expand...
Click to collapse
I don't understand your question. Can you use a better translator/formulate the question clearly? Also, if such a command existed, why would I write 3 paragraphs and a Guide?
My advice, go to the Github page of the tool and read/learn how the tool works first, then come back here if you're stuck.
Thx for this guide! my backup phone k41s is finally rooted
You are a very smart person. We finally have root for LGk41s (WORKS in K51s too).
Thanks!
Does this work on a provider locked LG K40?
Tem como flashear GSIs?
I was able to root my LG K51 from T-Mobile by following this guide.
I appreciate it!
It's don't work to LG K40S (Android 9 and 10), if you brick your phone u can reset them with:
*Backup command (Depend of which active slot, u use command with a or b):
py mtk w boot_a,vbmeta_a boot_a.bin,vbmeta.img.empty
py mtk w boot_b,vbmeta_b boot_b.bin,vbmeta.img.empty
*LGUP flash utility:
LGUP-FLASH-Utility (Based on LGUP-1.16-Cmd and LGUP-1.17-LGUP_Common.dll)
Hi, I think that this is my first post, today I received a LG G820TM to flash it, I found a LGUP version at LG G7 forum, cmd based (LGUP_Cmd.exe), so I managed to prepare something to work with, using a batch file, this gave me some problem with...
forum.xda-developers.com
try to install a twrp custom recovery, please!
guys,, someone already tried to install a gsi, by, mtkclient?
I tried, installing the avoc, on the partition system_ but the loop, extranho, if ma gsi has all the apps to start, q missing something I'm not seeing?
Mod edit - translated by https://www.deepl.com/translator:
Guys, it is possible to install a gsi in lgk41s, but when you install it asks for a password!
******************************
{Mod edit: Link removed}
alexandre-2717 said:
Mod edit - translated by https://www.deepl.com/translator:
Guys, it is possible to install a gsi in lgk41s, but when you install it asks for a password! If anyone wants to help or know more, has a group on telegram!
******************************
Pessoal, é possivel instalar uma gsi no lgk41s, mas quando instala ela pede uma senha! Se alguem quiser ajudar ou saber mais, tem um grupo no telegram!
{Mod edit: Link removed}
Click to expand...
Click to collapse
@alexandre-2717
1. As courtesy, I've translated your above post. With reference to rule no. 4 of the XDA Forum Rules, please post in English or add at least an English translation to your Portuguese posts. Thanks for your cooperation!
Spoiler: Rule No. 4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
2. I've removed the reference to Telegram from your above post. As an exemption from the last bullet of rule no. 5 of the XDA Forum Rules, we grant only developers the privilege to share references to their social media in their own development threads. These conditions obviously don't apply to your thread or you.
Regards
Oswald Boelcke
Senior Moderator
hello everyone, could someone tell me, if it's possible to delete certain files, with some mtkclient command, like locksettings.db which is in data/system/ please , and would I also like to shoot zip files? flesheei a gsi, and i'm stuck in the enter you password to start android screen, if i format py mtk and data, it's loop,
@Oswald Boelcke
thank you and sorry rss
{Mod edit: Quotation fixed}
Slim K said:
como uma ferramenta funciona primeiro e v
Click to expand...
Click to collapse
Rickpad said:
Thx for this guide! my backup phone k41s is finally rooted
Click to expand...
Click to collapse
Does anyone know if it's possible to do this on android 9, on 10 I can, but on 9 no, I wanted to because on android 9 there's recovery even if it's stock, is this a serto development site? does anyone know what prevents?
Great method, not that hard (Although not easy either)
Be aware that you first press the assistant + volume down button and then connect the USB to your PC, not the other way around. I didn't realize this earlier and almost pulled my hair out trying to understand why the program was freezing and sending errors
Also, the bootloader unlock command is outdated now, it was changed to py mtk da seccfg unlock
Worked on single-sim version (LM-K410HM)
Does it work on LG k52?
BRAIAN058 said:
Does it work on LG k52?
Click to expand...
Click to collapse
It's mediatek CPU, probably works, wouldn't hurt to try
[email protected] said:
hello everyone, could someone tell me, if it's possible to delete certain files, with some mtkclient command, like locksettings.db which is in data/system/ please , and would I also like to shoot zip files? flesheei a gsi, and i'm stuck in the enter you password to start android screen, if i format py mtk and data, it's loop,View attachment 5492953
Click to expand...
Click to collapse
does anyone know how to remove Vbmeta verification via MTKCLIENt?