Recently, I have bought a Samsung Galaxy S10e with 6 GB Ram and 128 GB Rom from Hong Kong because I acknowledge that the Chinese and Hong Kong versions are able to unlock the boot loader despite having the cpu chipset Snapdragon 855. After I have bought it for almost a week, I finally have some spare time to unlock the boot loader by updating the phone into the latest version and turning on the oem unlock in the developer settings, then restart the phone to get into the download mode (yeah, the method is a bit different from the Exynos vesion). At first, the progress was very smooth and I faced no obstacles, however, when I try to flash TWRP into my phone through Odin, it bricked after restart as shown in the two pictures uploaded. I am now currently cannot booting the device into recovery mode or download mode, the only things I can do is pressing the power and volume down button long enough to reboot the S10e. Therefore, I would like to ask if anyone help me fix this issue, thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Problem Solved
how did you solve this? i'm having a similar issue after flashing twrp via odin
puppyloaf said:
how did you solve this? i'm having a similar issue after flashing twrp via odin
Click to expand...
Click to collapse
If you're getting stuck on the "Samsung S10e" screen after trying to flash TWRP, I was in the same boat. I got into Download Mode by:
Unplugging the phone from USB to my computer
Holding VolDown + Bixby + Power
When the screen turns off to reboot, release Power, but keep holding VolDown + Bixby
After releasing Power, plug the USB cable into the phone to my computer
It's also really unhelpful for OP to just post "Problem Solved" without sharing how it was done.
smolder-turbofan said:
It's also really unhelpful for OP to just post "Problem Solved" without sharing how it was done.
Click to expand...
Click to collapse
Indeed. First asking for help and then being unwilling to share own knowledge is rude and not welcome on XDA. @kk5321513
Related
I can't post in bootloader dev thread http://forum.xda-developers.com/showthread.php?t=1328714&page=28 so I'll post here to ask the question.
This was brought up:
tylercarter
strange mine doesnt say locked or unlocked. am i doing something wrong? where can i find the info? i thought i just held both volume rockers and power on. says "AP fastboot Flash Mode (s)" 0A.65
i know on the razr is says locked or unlocked and gives a value of 1 - 4 but i dont have that either.
maybe "s" is for special lol
mtnlion
no it means stuck like the rest of us
zoide_
Mine says:
--------------------------------
AP Fastboot Flash Mode (S)
0A.65
Battery OK
OK to Program
Connect USB
Data Cable
--------------------------------
I got excited there for a moment because it didn't say LOCKED. Then I read mtnlion's post and he crushed my dreams
Click to expand...
Click to collapse
So I checked mine and got this:
Boot mode selection menu (0A.65)
press volume up/down blah blah
normal powerup
recovery
apfastboot
bp tools
I got this from holding vol up/down and then holding power until this screen came on. So..... is this locked or unlocked? I don't have the (S) that everyone else is saying. Can someone let me know?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was in the same position after I flashed the FXZ got the same screen. I chosse BP Tools and my phone booted up and I hope it works for you!!!
You are still locked.... We have not found an atrix2 with an unlocked bootloader yet. And there are not any "developer" edition phones with the unlocked bootloader that we can copy it from, since they don't have them for this phone (I have tried very hard to get one, and can't find them).
thanks for the heads up. I was hoping since I didn't see the (s) that I would get lucky.
Thats just the first screen. Go into the AP Fastboot menu option and you will see the other screen that was mentioned.
extide said:
Thats just the first screen. Go into the AP Fastboot menu option and you will see the other screen that was mentioned.
Click to expand...
Click to collapse
ok, I see now. crap. LOL thanks.
Hi,
This is my first time ever being on this site! I have never dealt with any rooting or modifying before. I was unlocking a moto g with Telus I got a code online and I entered it in and my phone began to get a problem. A white display shows up saying WARNING BOOTLOADER UNLOCKED! and then afterwards it shows a black screen and the process repeats again. I have tried to do the flash boot were I hold power and volume up but when I select a option it goes right back to the warning display. I am not sure what to do any help would be greatly appreciated! I have installed motorola device manager on my computer but it says its up to date and that I have the current version. Sometimes also when I plug it into the computer during the white warning display my computer recognizes the phone and tries to install some drivers but it never completes because the phone reboots.
I have tried following a youtube guide but it hasn't helped as I'm clueless on what to do.
Thanks in advance!
press & hold Ur Phones power button When screen is completely off Quickly press & hold Volume down & Power button combined.. If Ur Able to get in Bootloader Mode Then U can Flash any Custom Recovery and roms...
jbanti said:
press & hold Ur Phones power button When screen is completely off Quickly press & hold Volume down & Power button combined.. If Ur Able to get in Bootloader Mode Then U can Flash any Custom Recovery and roms...
Click to expand...
Click to collapse
Thanks for the reply,
How do I flash the phone I've never done it before. Could you link me to a guide or tell me the steps thanks
Canuckfan101 said:
Thanks for the reply,
How do I flash the phone I've never done it before. Could you link me to a guide or tell me the steps thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2542219
[GUIDE] Moto G - Restore stock firmware
Not WOrking
jbanti said:
http://forum.xda-developers.com/showthread.php?t=2542219
[GUIDE] Moto G - Restore stock firmware
Click to expand...
Click to collapse
Hi, I tried the guide but when I get to step 2 and browse to the firmware folder and press enter it just keeps popping up this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Picture LINK!
thanks!
did you extracted the downloaded package and Fastboot in the same folder?
again Read the full information and try again...
If you need anything just post ur questions in above give thread..
hope they will definitely solve ur problem..
hi i tried to update my galaxy s6 sm-g920f and its now stuck on the following screen. im unable to boot into download mode. any help with what to do next. kies and smart switch wont recover the firmware!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
stuck with the warning triangle say an error has occurred while updating the device software. use the emergency recovery function in the smart switch pc software.
Try these steps.
1. Press and hold both volume down + power buttons at the same time until the phone LCD shuts off.
2. Once LCD powers down press and hold volume down + home button + power button to get to download mode.
3. Reflash stock 5.1.1 ROM via odin.
4. If it does no work bring your S6 back to Samsung for warranty repair.
roydok said:
Try these steps.
1. Press and hold both volume down + power buttons at the same time until the phone LCD shuts off.
2. Once LCD powers down press and hold volume down + home button + power button to get to download mode.
3. Reflash stock 5.1.1 ROM via odin.
4. If it does no work bring your S6 back to Samsung for warranty repair.
Click to expand...
Click to collapse
thank you for your reply. this didnt work odin wont get past setup connection. ive now emailed Samsung
craigmgzs55 said:
thank you for your reply. this didnt work odin wont get past setup connection. ive now emailed Samsung
Click to expand...
Click to collapse
managed to get it into download mode again and finally after reading another thread and renaming the hidden.img file i now have my phone back.
Came here to suggest the hidden.img fix, glad you've got it sorted
craigmgzs55 said:
managed to get it into download mode again and finally after reading another thread and renaming the hidden.img file i now have my phone back.
Click to expand...
Click to collapse
Can you please share how exactly you did fix this? (where can I find the another thread?) I have the same problem here and want to follow the same procedure. I also tried to enter into download mode with no success and keep coming back the triangle error. PLEASE HELP!
Just going to leave this as an open request...
If anyone has a brand new phone or one they've literally NEVER used the EDL tool on before-- I'm curious to know if the bootloader on this phone has a stock menu at all.
If anyone has a completely stock phone that has never been unlocked and can try this - try to reboot the phone into the bootloader. No risk of doing anything to your phone to try this - just reset the phone via the menu or by holding down the power button until it resets. Then hold both Vol+ and Vol- buttons down BEFORE the phone vibrates and shows the ZTE screen and keep holding them. If you were holding power, release it as soon as you see the ZTE logo.
If that doesn't work and the phone just keeps booting, try again but this time hold just the Vol+ button instead until the Recovery menu shows up (definitely does exist on the stock). Pick the 2nd option to reboot into bootloader.
Let me know if both of those methods just go straight to booting the OS, or if there's a stock a bootloader menu they pull up. And if so, maybe send a picture would be nice. But mostly I'm just trying to find out if the stock ROM had a bootloader menu at all.
It does not, this is enabled with the eng abl from unjustufied devs bootloader unlock tool.
rafyvitto said:
It does not, this is enabled with the eng abl from unjustufied devs bootloader unlock tool.
Click to expand...
Click to collapse
Thanks rafy. I thought so but couldn't be sure since I lost one of my original abl's I thought maybe it could just be a problem with my stock bootloader. Sucks that there's no stock fastboot because in A10 the bootloader won't load.
I saw you made a breakthrough with GSI support btw, nice! I ran out of time to tinker around with the phone as much as I was, would have loved to get more involved. Thanks for the work though, hopefully more people get involved as I do think there's plenty of possibilities for this phone. :good:
Not a virgin device but this info may be useful:
This is the Recovery on my A2020U after:
1. I unlocked the bootloader while on A9;
2. I upgraded to A10 using the official SD card update;
3. Booted by holding Vol+ and Power.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 5112251
Sent from my PH-1 using Tapatalk
eKeith said:
Not a virgin device but this info may be useful:
This is the Recovery on my A2020U after:
1. I unlocked the bootloader while on A9;
2. I upgraded to A10 using the official SD card update;
3. Booted by holding Vol+ and Power.View attachment 5112249View attachment 5112251View attachment 5112253
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
That was helpful, thanks. The theme on A10 recovery is funny because the first time I installed A10 was right after I tried out LOS16 and the theme colors are so similar I thought the recovery from that had somehow stayed around. A9 had recovery too but the menu was less graphical. Neither A9 or A10 has a bootloader menu though (Vol+/-).
Hey...I have this prestigio multipad pmp3870c and it's quite old and I wanted to install a custom ROM but before that I rooted it the old fashion way using the super user stuff and so I accidently deleted a system file and now it does not boot as it goes into the prestigio logo but does not proceed.
I legit do not know where to start as Its an unfamiliar tablet for me and so I would like to flash the stock ROM.
Am sure the firmware can easily be found so please help me find it and guide me on how to flash the ROM.
Pls help. Thanks
If you're not in a bootloop and if USB Debugging is enabled then you might use ADB Sideload method, otherwise you might use method apply update from external storage from within Android's Recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bruh i forgot how to boot in recovery and I can't see help on this specific device....how do I go into recovery
May be this way, but IDK because I don't own such a device
Power off your device.
Boot in recovery mode by pressing and holding Volume Up and Power Button at the same time.
Release all buttons when the Prestigio MultiPad screen flickers and in a few seconds the Recovery screen will appear.
jwoegerbauer said:
May be this way, but IDK because I don't own such a device
Power off your device.
Boot in recovery mode by pressing and holding Volume Up and Power Button at the same time.
Release all buttons when the Prestigio MultiPad screen flickers and in a few seconds the Recovery screen will appear.
Click to expand...
Click to collapse
this tab is a pain...i think its software is messed up cause i have tried all the combos
power+volume up (released on boot logo)
power+volume down (released on boot logo)
power+volume down (released power on boot logo)
power+volume up (released power on boot logo)
smh....i think im just gonna give up and just call it dead cause its not even going into recovery and its usb debugging is off so no dice lol.
but i remember some flash tool but its just so complex am gonna try using sp flash tool....wish me luck