How to flash custom rom? - Xiaomi Poco F2 Pro (Redmi K30 Pro) Questions & Ans

Guys, i want flash a custom rom.
Someone write me full instructions?
Ex; Mi bootloader unlock etc.

unlock bootloader
Install twrp which i wont recommend because its unstable one and wait for official twrp if u don't want bootloop
after twrp ,mount all storage, clear all data ,cache but don't erase system data then flash Custom rom zip file and restart

Twrp is not working properly with Xioami.eu roms because Google change their code and kernel , better wait for new working TWRP and new realize

There are plenty guides on unlocking and flashing TWRP. I would suggest to not upgrade to A11 to avoid TWRP issues. What I did from stock A10 using Chinese TWRP:
Flash required stock rom base,
Flash custom rom,
Flash Gapps if required,
Flash magisk,
Format data,
Reboot.

Related

[Q] How to remove colorOS

Hello,
I have a question regarding how to flash CM 11.
After unlocking the bootloader, should I install a custom recovery and flash the ROM zip from custom recovery or should I put the phone in fastboot mode and flash the rom from there (http://www.androidheadlines.com/2014/07/android-flash-oneplus-one-stock-cyanogenmod-11s.html)?
Thanks for your time!
Ixtilion said:
Hello,
I have a question regarding how to flash CM 11.
After unlocking the bootloader, should I install a custom recovery and flash the ROM zip from custom recovery or should I put the phone in fastboot mode and flash the rom from there (http://www.androidheadlines.com/2014/07/android-flash-oneplus-one-stock-cyanogenmod-11s.html)?
Thanks for your time!
Click to expand...
Click to collapse
You should download a custom recovery, personally recommend twrp. I would flash the custom ROM from the dev section in recovery, to make sure you get the most updated version.

How to flash OTA update on rooted phone with custom recovery?

Trying to flash 5.0 OTA from 4.4.4 without losing data on Nexus 5.
I don't know how to remove custom recovery so I can sideload the OTA zip in the stock recovery. It keeps loading into TWRP instead.
Can someone explain step by step how I flash the factory recovery.img?
That's not even possible (as far as I know)...
XDA Visitor said:
Trying to flash 5.0 OTA from 4.4.4 without losing data on Nexus 5.
I don't know how to remove custom recovery so I can sideload the OTA zip in the stock recovery. It keeps loading into TWRP instead.
Can someone explain step by step how I flash the factory recovery.img?
Click to expand...
Click to collapse
Removing a custom recovery while preserving data is not possible, you should backup all your data, remove the custom recovery, flash 5.0 and then restore your custom recovery.
Are you using the Nexus Root Toolkit? It's incredibly easy and I use it for almost all my flashing, rooting, etc.
You can't apply an OTA on a rooted phone. On Kitkat and before you could end up in a boot loop. After Lollipop the OTA changed to system-level verification, and any change to the ROM stopped the OTA - all you get is a reboot to an unchanged system.
In any case, major ROM jumps usually work best with a total wipe and clean install of the new ROM. somerandomatoms is right - back up and install the new ROM. But why go to 5? You may as well go straight to 6.0.1.

Updating firmware with rooted phone and custom kernel

I rooted my OnePlus when it first came out and had a custom kernel on it, and since then I haven't updated it. I want to update to CM13 but am not familiar with the process that needs to be done without losing any data or risk bricking my phone. I believe it has TWRP recovery and Franco kernel (I don't have the phone with me so can't verify).
Do I simply unlock the bootloader, backup data and then flash the new custom ROM? Would I be able to flash a custom ROM without losing root? I want to keep the root but go back to stock kernel.
Thanks
When you unlock your bootloader you'll lose all your data. However if your bootloader is already unlocked, proceed to flash this TWRP version (unofficial TWRP 2.8.6.0.6 by kumajaya): www.androidfilehost.com/?fid=23991606952609056
Other versions of TWRP have bugs not updating the firmware properly.
You'll lose your root but CM13 nightlies have their own root in the developer settings. Or you can flash SuperSU 2.67 on top after you flash the ROM if you prefer SuperSU.
Oh and make a TWRP nandroid backup first before you do anything. Backup the firmware partition too if it's not checked by default.

D6603 23.4.A.1.264 Lollipop 5.1.1 downgrade

Hi all i just bought this mobile and i was curious to know if it was possible to install a custom rom.
I saw that the downgrade is the only solution to root and install custom recovery.
In my case i wish to know which file i have to flash with flashtool.
Thanks all
http://forum.xda-developers.com/showthread.php?t=3017056
You just have to follow this Guide...
Gesendet von meinem D6603 mit Tapatalk
My Z3 is totally stock i didn't made any backup and save of DRM TA etc. can i do the downgrade anyway?
Thanks
PdorITA said:
My Z3 is totally stock i didn't made any backup and save of DRM TA etc. can i do the downgrade anyway?
Thanks
Click to expand...
Click to collapse
Yes
Update:
Downgrade --> Done
Root and DualRecovery--> Done
Backup DRM TA --> done
Bootloader Unlock --> Done
I'm trying to flash custom room rebooting in Teamwin recovery the flash goes perfect but after when i reboot the Z3 it goes in boot loop and i can enter only in the recovery the Z3 won't start at all.
I've tryied with 2 custom ROm and the original rom lollipop rooted and patched.
What i do wrong? I just put the custom rom in the Micro-sd card and i flash it using the teamwin recovery (before i wipe cache and Dalvik). Do i have to flash before the boot.img?
Thanks
PdorITA said:
Update:
Downgrade --> Done
Root and DualRecovery--> Done
Backup DRM TA --> done
Bootloader Unlock --> Done
I'm trying to flash custom room rebooting in Teamwin recovery the flash goes perfect but after when i reboot the Z3 it goes in boot loop and i can enter only in the recovery the Z3 won't start at all.
I've tryied with 2 custom ROm and the original rom lollipop rooted and patched.
What i do wrong? I just put the custom rom in the Micro-sd card and i flash it using the teamwin recovery (before i wipe cache and Dalvik). Do i have to flash before the boot.img?
Thanks
Click to expand...
Click to collapse
You are either flashing an incompatible custom ROM or your boot loader is not unlocked.
Flash a stock FTF again, then goto the dialer and dial *#*#7378423#*#* then goto service info, configuration and post here what it says in the rooting status.
gregbradley said:
You are either flashing an incompatible custom ROM or your boot loader is not unlocked.
Flash a stock FTF again, then goto the dialer and dial *#*#7378423#*#* then goto service info, configuration and post here what it says in the rooting status.
Click to expand...
Click to collapse
Screenshot:
http://dl-1.va.us.xda-developers.com/3/6/5/9/4/7/7/Screenshot_2016-02-25-14-31-22.jpg?key=GrIQDs1awaejgcECU90NhA&ts=1456407354http://
ROM: http://forum.xda-developers.com/z3/development/d6603-23-1-1-28-t3102271
ROM2: http://forum.xda-developers.com/z3/development/rom-existenz-y-1-0-0-02-07-t3148877
PdorITA said:
Screenshot:
http://dl-1.va.us.xda-developers.com/3/6/5/9/4/7/7/Screenshot_2016-02-25-14-31-22.jpg?key=GrIQDs1awaejgcECU90NhA&ts=1456407354http://
ROM: http://forum.xda-developers.com/z3/development/d6603-23-1-1-28-t3102271
ROM2: http://forum.xda-developers.com/z3/development/rom-existenz-y-1-0-0-02-07-t3148877
Click to expand...
Click to collapse
Well, neither of those require an unlocked bootloader, but that should not make a difference.
What boot.img are you flashing, both of those ROMs require a stock kernel.
gregbradley said:
Well, neither of those require an unlocked bootloader, but that should not make a difference.
What boot.img are you flashing, both of those ROMs require a stock kernel.
Click to expand...
Click to collapse
at moment i have a 4.4.4 stock rooted http://dl-1.va.us.xda-developers.com/3/6/5/9/5/7/4/Screenshot_2016-02-25-15-46-09.jpg?key=4YW3-mNtbisUcXLWsSrQ_g&ts=1456411770
Which procedure i have to follow to flash a custom ROM?
i normally copy the rom zip on the external micro SD card
i go to teamwin recovery i do a wipe and after i do install
The install finish and i click on reboot
DO i have to do other steps to flash the stock kernel?
i didn't flash any boot.img and kernel until now
UPDATE
problem solved i flashed the stock 5.1.1 kernel before to flash the rom and the bootloop disappeared.
Now i'm with the custom Mod there is any possibility to restore the DRM functions with the custom rom?
PdorITA said:
at moment i have a 4.4.4 stock rooted http://dl-1.va.us.xda-developers.com/3/6/5/9/5/7/4/Screenshot_2016-02-25-15-46-09.jpg?key=4YW3-mNtbisUcXLWsSrQ_g&ts=1456411770
Which procedure i have to follow to flash a custom ROM?
i normally copy the rom zip on the external micro SD card
i go to teamwin recovery i do a wipe and after i do install
The install finish and i click on reboot
DO i have to do other steps to flash the stock kernel?
i didn't flash any boot.img and kernel until now
UPDATE
problem solved i flashed the stock 5.1.1 kernel before to flash the rom and the bootloop disappeared.
Now i'm with the custom Mod there is any possibility to restore the DRM functions with the custom rom?
Click to expand...
Click to collapse
Well, if you only want to stay on these stock based custom rooms there was no need to unlock the bootloader. You only need that for truly custom rooms like cm or aosp.
If you want these rooms with drm keys then do this.
Restore your T A backup. This will relocate your bootloader
If this results in a boot loop, then flash a stock ftf, and do everything again EXCEPT do not unlock the bootloader this time

J7 Prime bootlooping after flashing twrp

I need help I cant speak very very good english sorry. I flashed twrp my J7 prime but if I try rebooting his bootlooping always can I flash custom rom or Stock rom ? (My j7 prime can goes downloading mode and twrp)
Eren but Türk said:
I need help I cant speak very very good english sorry. I flashed twrp my J7 prime but if I try rebooting his bootlooping always can I flash custom rom or Stock rom ? (My j7 prime can goes downloading mode and twrp)
Click to expand...
Click to collapse
If you can not into recovery or download mode, try to flash TWRP again.
Or flash back stock firmware if that does not work. Keep in mind to use Home_CSC to boot wipe your data.
Eren but Türk said:
I need help I cant speak very very good english sorry. I flashed twrp my J7 prime but if I try rebooting his bootlooping always can I flash custom rom or Stock rom ? (My j7 prime can goes downloading mode and twrp)
Click to expand...
Click to collapse
Just flash stock firmware through odin again then boot back into download mode then flash TWRP and untick "Auto-Reboot" option then when flashing is done, boot into recovery manually to verify if TWRP is installed properly then you could boot back up to OS from TWRP it shouldn't loop if all went well. Also make sure that before you flashed TWRP, you enabled OEM Unlock and USB Debugging option in developer options.
Eren but Türk said:
I need help I cant speak very very good english sorry. I flashed twrp my J7 prime but if I try rebooting his bootlooping always can I flash custom rom or Stock rom ? (My j7 prime can goes downloading mode and twrp)
Click to expand...
Click to collapse
It's fine , Flashing TWRP first time wipes your data thus you get bootloop. You just need to Flash a custom rom and evertything will he fine.
tytfusokhszxc said:
It's fine , Flashing TWRP first time wipes your data thus you get bootloop. You just need to Flash a custom rom and evertything will he fine.
Click to expand...
Click to collapse
Yes since TWRP needs internal storage and data wipe to properly work with these partitions when coming from stock ROM but flashing a custom ROM after a clean wipe of the partitions should work fine.
HERE IS THE SOLUTION :
after flashing twrp with odin open twrp and format data after then there is a bug for j7 devices sd card won't work so u need a pc to transfer no verify encryption file to.internal storage here is the file or you can flash magisk 22.1 to disable keneral encryption
(THIS PROBLEM OCCURS BCZ AFTER FLASHING YOUR KENERAL FORCE ENCRYPT YOU TO NOT BOOT IN ROM BCZ OF SECURITY FLASH THIS FILE TO COMPRAMIZE KENERAL SECURITY )
Just Flash the custom rom you have downloaded.
Same thing happened to me when i flash recovery for the first time stucked at the bootlogo.
Hello
All of members here want say one thing( but it's very unclear and confusing )( excuse me all of members post here I don't want say all of you say wrong)the summery of all massages upper than here want say the the stock kernel when installed can not accept the custom recovery .you should with one of this ways disable it:
1-disable dm-verity with file upper massages posted
2-root it
3- install custom kernel
4-install custom rom
AM.Ohadi said:
Yup do among 4 anything it works Hello
All of members here want say one thing( but it's very unclear and confusing )( excuse me all of members post here I don't want say all of you say wrong)the summery of all massages upper than here want say the the stock kernel when installed can not accept the custom recovery .you should with one of this ways disable it:
1-disable dm-verity with file upper massages posted
2-root it
3- install custom kernel
4-install custom rom
Click to expand...
Click to collapse

Categories

Resources