For people suffering from screen flashes in lock screen after updating to android 11 simply
1. perform factory reset in recovery mode( hold down power and volume down when booting up )
2. do not uninstall com.coloros.weather.service when debloating your device
I was stuck at this situation after upgrade to android 11.
The pin code window did not pop up and fingerprint sensor malfunctioned.
USB Debugging is disable so I can't reinstall the bloatware...
Also I'v tried QFIL, but I can't get the correct firehose to dump the partition...
How to solve this problem and reserve my personal data?
Biggest mistake for me was to buy this phone
hsiangying said:
I was stuck at this situation after upgrade to android 11.
The pin code window did not pop up and fingerprint sensor malfunctioned.
USB Debugging is disable so I can't reinstall the bloatware...
Also I'v tried QFIL, but I can't get the correct firehose to dump the partition...
How to solve this problem and reserve my personal data?
Click to expand...
Click to collapse
Hi,
Were you able to revolve your issue.I have a Realme X2 Pro that boots to a white screen. I am unable to boot to recovery. This happened after recent Android 11 update.
Thanks,
Related
Hey guys,
I am not a pro at android devices and debugging but have spent several days on tutorials on how to fix it.
The problem was as follows: My battery wasn't charging fast anymore with any adapter and cable. (i tried 3 stock poco f2 pro chargers and cables rated at 33W. It charges only full in 8 hours.
So i opened the phone and changed the USB charging port from the inside to see if this was the problem. Now it luckily charges but after installing software updates on the phone (i was on 12.0.3 and updated to 12.5.1. It worked for 10 minutes until I restarted my device. It is now stuck on MIUI logo and stays there forever.
aNow i accidentally turned off USB debugging in developer options to see if that would fix the slow charging problem. But because of this and my device is bricked and now my device is not reqognized by my laptop anymore so I can flash firmware to stock.
Does anyone know how i can actually boot it with stock firmware to unbrick my poco f2 pro?
Take it to authorized service center and let them try to fix it.
Django023 said:
Hey guys,
I am not a pro at android devices and debugging but have spent several days on tutorials on how to fix it.
The problem was as follows: My battery wasn't charging fast anymore with any adapter and cable. (i tried 3 stock poco f2 pro chargers and cables rated at 33W. It charges only full in 8 hours.
So i opened the phone and changed the USB charging port from the inside to see if this was the problem. Now it luckily charges but after installing software updates on the phone (i was on 12.0.3 and updated to 12.5.1. It worked for 10 minutes until I restarted my device. It is now stuck on MIUI logo and stays there forever.
aNow i accidentally turned off USB debugging in developer options to see if that would fix the slow charging problem. But because of this and my device is bricked and now my device is not reqognized by my laptop anymore so I can flash firmware to stock.
Does anyone know how i can actually boot it with stock firmware to unbrick my poco f2 pro?
Click to expand...
Click to collapse
can u boot into MIRecovery and fastboot?
are you able to open fastboot in phone?
Right set to fastboot and flash with mi tool
Hey huys,
Non of the above helped. I run fastboot mode on phone but phone not showing up on flash tool, probably because I turned off USB debugging?!
Django023 said:
Hey huys,
Non of the above helped. I run fastboot mode on phone but phone not showing up on flash tool, probably because I turned off USB debugging?!
Click to expand...
Click to collapse
No,Install the drivers with MIflash.https://forum.xda-developers.com/t/guide-use-xiaomi-flash-tool.4262425/
NOSS8 said:
No,Install the drivers with MIflash.https://forum.xda-developers.com/t/guide-use-xiaomi-flash-tool.4262425/
Click to expand...
Click to collapse
I can't, I get an error message in chinese
Update:
Hey guys,
I got a Poco f2 pro which I got an unlocked bootloader. I was running a rooted Poco phone and I don't know why but I accidentally turned off USB debugging in developers settings. When there was an operating system update it got stuck in a boot loop. The problem is I can only do a few things with this phone now which is: Turn on: It starts and gets stuck at the MIUI logo.
Turn on +volume up: Recovery mode = I can connect to WiFi and press download but it just keeps searching for updates and doesn't do anything.
Turn on + volume down: Fastboot = it shows fast boot is started but when plugged in my pc it doesn't find my phone.
Things I tried:
Install USB drivers, Xiaomi drivers - phone not showing
Installed Mi Pc Suite - Phone not showing
Installed MiFlash - Phone not showing
Tried different Pc's and laptops from Windows 10 and 11 - did not work
Tried different USB ports, 2.0,3.0 and type C - did not work
Does someone know how I can fix my phone and tell me what to do?
anyone has a clue what to do? I was able to boot to MIUI Rescue and connect to WiFi but it searches for update and then it says it couldn't find updates
MIUI-V12.5.1.0.RJKMIXM (N/A) -> ???
Django023 said:
anyone has a clue what to do? I was able to boot to MIUI Rescue and connect to WiFi but it searches for update and then it says it couldn't find updates
MIUI-V12.5.1.0.RJKMIXM (N/A) -> ???
Click to expand...
Click to collapse
try wipe data
NOSS8 said:
try wipe data
Click to expand...
Click to collapse
I did but after that nothing changes.
I think it crashed when going from android 10 to android 11 and maybe it is some sort of encrypted.
Django023 said:
I did but after that nothing changes.
I think it crashed when going from android 10 to android 11 and maybe it is some sort of encrypted.
Click to expand...
Click to collapse
Surely due to the root or coincidence the usb port is dead.
Try the EDL mode and download the qualcomm drivers (search on google) then connect the phone and see if it is detected.
Hello everybody
I am a beginner and before look for bootloader my Huawei m5 8.4, I would know if it is possible to have Android 10 or 11 on my tablet (Sht-w09)?
Thanks for your help
Perhaps my request seem strange but it is important for me to have the answer to do not mistake.
If it is impossible, I don't touch at my bootloader
Officially you will not get Android 10 or 11 on your SHT-W09, inofficially you can run the GSI-builds, e.g. from https://github.com/phhusson/treble_experimentations/releases
Thanks. I like the inofficialy solution
If I understood, I must install treble on my tablet and choose any version of Aosp?
you do not need to "install" treble. The Android version of the M5 is based on treble and that enables you to install those GSI images.
... are you sure you know what you are doing and you have your bootloader already opened? Please read and study a bit before starting to mess with ROM flashing. It's quite easy to create a brick
Yes you have reason when you wrote your post because I had use DC-unlocker for my bootloader but when I installed test point, my tablet has turned off and no longer turns on, no longer charges.
I tried power bottom during 30 s, volume bottom etc.
My tablet is dead.
@Renarde I'm really sorry to hear that. It's always better to be save than sorry.
Thanks you AnDiSa, but I think that nothing can be save
Anyone can help me please.?
Renarde said:
Yes you have reason when you wrote your post because I had use DC-unlocker for my bootloader but when I installed test point, my tablet has turned off and no longer turns on, no longer charges.
I tried power bottom during 30 s, volume bottom etc.
My tablet is dead.
Click to expand...
Click to collapse
It is not clear, did you successfully unlock your bootloader?? If yes, did you flash the right phh treble "*.img"?
No I don't unlock my bootloader, I only install Software testpoint and then my tablet had turn off for ever I think.
I do that :
DC-phoenix enable software TP
DCphoenix enable software testpoint
www.dc-unlocker.com
Renarde said:
No I don't unlock my bootloader, I only install Software testpoint and then my tablet had turn off for ever I think.
I do that :
DC-phoenix enable software TP
DCphoenix enable software testpoint
www.dc-unlocker.com
Click to expand...
Click to collapse
I read that that sw is able to downgrade emui, contact the dc-unlocker team or you could restore the original firmware with the Huawei suite.
My pc don't detect my Huawei m5
Renarde said:
My pc don't detect my Huawei m5
Click to expand...
Click to collapse
Neither in fastboot mode???
Fastboot mode don't work, I try it.
The screen is black, nothing happen, no light etc
Renarde said:
Fastboot mode don't work, I try it.
The screen is black, nothing happen, no light etc
Click to expand...
Click to collapse
I suggest to search on the web, any android devices should boot in fastbost or recovery mode. Do you try to downgrade the firmware or flash a wrong one?
I remember to enter in fastboot mode: while is off, press VOL UP then connect to a usb port the M5.
For the recovery mode: the M5 is off, press POWER+VOLUP.
I downgraded via Hi suite to Android 8 before doing the manipulations.
I try fasboot mode and recovery mode without sucess
Renarde said:
I downgraded via Hi suite to Android 8 before doing the manipulations.
I try fasboot mode and recovery mode without sucess
Click to expand...
Click to collapse
But android 8 booted? i think no. There is a guide to downgrade the os, you cannot simply flash an older firmware.
I found this, this user uses erecovery.
yes:
my desktop (cause im in bootloader mode i'll need to use it) is artix linux with kde. sadly i cant install on it adb/fastboot and other drivers due to lack of systemd and empty repos so will do it probably from a random linux-based bootable usb...
my mobile is (as was in title) - xiaomi redmi go - european version.
what means ? my mobile have encryption after removing system what makes me unable to boot things... for the now i can still boot stock ROM. although i wanted to remove all associations with google in system (all google apps, bugs caused by removal etc...)
any ideas what i should do with it? wanna have it to tomorrow cause we use our mobiles at work and my current mobile got "marked as over outdated" by boss so i cant use
why noone ?
This same things happen with me also but You need a USB cable to connect your phone to PC. You need to download ADB and Fastboot Tools to your PC and Extract it First of all, you need to enable the developer option and activate the USB debugging on Xiaomi Redmi Go. Now activate the OEM unlock status on your Xiaomi Redmi Go DinarGuru.com
Christinakim said:
This same things happen with me also but You need a USB cable to connect your phone to PC. You need to download ADB and Fastboot Tools to your PC and Extract it First of all, you need to enable the developer option and activate the USB debugging on Xiaomi Redmi Go. Now activate the OEM unlock status on your Xiaomi Redmi Go
Click to expand...
Click to collapse
this i actually know. i have one heavily modded lg so im not a newbie. its more about "encryption unsuccesful" broked roms leading to non-booting state (bootloop) etc... nothing from xda surely doesnt work, yep
surely nothing from : https://forum.xda-developers.com/m/techyminati.8245761/ works. was trying loads of times always bootloop. recovery posible to load but then tends to not make factory reset and lock in "encryption unusccesful", and thats worst... im in europe but have global version btw...
dead chat ?
Hi, I accidentally bricked my phone flashing the wrong image.
Now i can't turn off the phone, cant access to recovery or fastboot. (device doesn't respond when i click any button).
'Poco' logo is in loop. Anyone knows a way to install a ROM? Any way to access fastboot in this situation?
Try pressing the buttons for a long time. It resulted for me to get to recovery mode, but no to download mode. Sometimes it works.
I bought a poco x4 gt like that too, hoping to get it fixed, I believe the way to get it is via EDL mode and miFlas, but for now miflash still doesn't recognize the image of the poco x4 gt. I hope that in some future update I will recognize it.
i have same problem
Same problem here
did anyone was able to find a fix? or at least locate the test points for EDL?
mtk devices use a different way to access edl mode. in my case I access the edl mode, the computer recognizes it, the software recognizes it, but when running it says that SPflash still does not work with the scartter version of the rom that I downloaded
how did you manage to boot into edl mode? i tried several hw key combinations but it gives me "preloader handshake failed" or several BROM error.
i think my scatterfile seems ok. its just the brom/edl connection.
when you turn it on with the volume button less pressed and it connects quickly to the pc install the MTK driver and then run the python where it will read the brom
Mine already fixed
butaw1 said:
Mine already fixed
Click to expand...
Click to collapse
what did you do?
if any one want to fix his poco x4 gt bootloop only. can't reach fastboot or recovery. at first you need auth to bypass dim 8100 security. i found a person on github name Rafon he fixed my phone and it's working perfectly right now. his username on telegram is @Rafon24
same issue
the only way of fixing is through an authorized xiaomi account sadly
i however found a way to turn it off when nothing works:
press all 3 buttons (volume up, down and power for like 20 seconds)
and then it will turn off
Hello thank you for welcoming me following the screen breakage of my xiaomi I take out my huawai p40 lite 4g to troubleshoot which has actually broken down it actually reboots on the logo I can access the menus with volume + and power control for recovery etc to connect it via usb to the huawai software but the smartphone is locked I have tried everything for 2 days with adb etc but the adb software does not open under windows 10 I do not know what is the correct method
to reinstall the rom correctly I think this one is corrupted if someone is able to guide me
THANKS