The volume of ringtone and notification sound can not be adjusted seperatly. At itself not a problem except for the fact that notification volume is way higher then ringtone volume. If I set the volume lower then the ringtone cannot be heard anymore and the notification volume is still to high.
If I set the volume higher then the notification will become a disturbence.
I have tried some 3rd party apps to manage volume of ringtones and notifications seperatly. But those do not seem to be capable off manageing notification volume and ringtone volume seperatly either.
For now I have decided to turn off notification sounds because off the volume.
I have had an OP6 before the OP Nord. There the volume of ringtones and notifications could not be managed seperatly as well but at least the volume of both ringtone and notification was in sync (equal loudness).
Anyone else noticed this? Any ideas on how to get the notification volume in line?
Do you use own file for ringtone? You can edit it, increase volume, e.g. in Audacity on PC, so it will be louder than notification sounds, and then lower ringtone volume.
Sent from my Nord using XDA Labs
Yeah, it is not a OP ringtone.
Strange thing is I have been using this ringtone on my OP6 previously where I did not have this "volume" problem.
I will give Audacity a try.
Thx.
Hi try this app, This might work for you.
It will increase ringtone volume to 100% before receiving normal call.
P.S tested on galaxy devices.
https://forum.xda-developers.com/t/...olume-increase-before-receiving-call.4277677/
Related
Friends!
I always keem my system volume low but ring volume at 80%. But when I receive the SMS it Notificatio plays at system volume, not at ring volume. Now how can I recover SMS notification Volume at ringer volume.
Is it so that, SMS alert Volume is System based Volume, not Phone base Volume ?
Previously I was using Photo Contact Pro but I have removed that, after that this issue arise.
I have this problem too..i dont want my System Volume at 100%, but i want to hear my incoming SMS...
Any solutions? Its it possible to put SMS and Mail tones into the Ringtone category?
mehulpatel said:
Friends!
I always keem my system volume low but ring volume at 80%. But when I receive the SMS it Notificatio plays at system volume, not at ring volume. Now how can I recover SMS notification Volume at ringer volume.
Is it so that, SMS alert Volume is System based Volume, not Phone base Volume ?
Previously I was using Photo Contact Pro but I have removed that, after that this issue arise.
Click to expand...
Click to collapse
Any help on this would be useful; as stated, it seems that the sms alert is system volume rather than ring volume, is this correct?
Thanks.
I have to +1 this, on my touch hd same thing, it's just plain stupid that MS put the reminders, sms and stuff to system volume!!! I see no point in doiing so, nobody with a fix for that?
Anything on this?
A bit different, but: Is there a programm that forces SMS notifications to vibrate/ring more than one time?
Orbbman said:
A bit different, but: Is there a programm that forces SMS notifications to vibrate/ring more than one time?
Click to expand...
Click to collapse
look for pocketMax PhoneAlarm (http://www.pocketmax.net/phoneAlarm.html) and with this skin is looks great on today screen (http://www.pocketmax.net/smf/index.php?topic=7145.0)
Not a real solution but a work around is you can increase the volume of the wav file you use for SMS notification.
Its very simple, copy the wav file to your XP desktop (not sure if vista is similar) and right cligh the file and choose record. Then from Effect choose "Increase Volume" and save file and copy back to your phone and use it as you SMS notification. If you need it to sound higher, click "Increase Volume" as many time as you want.
same problem here!
so far, i merged the system and ringer together and kip all of them at 100%, but i have to remember every time I'm listening to some music and decrees the volume to put the volume up again!
there must be a way ... please help
Hello All,
I always want vibration only on ring with no sound. When I set ring to vibrate, that also turns off the sound on the included media player which means no sound for hearing voice mails. To hear voice mail, I have to go to the volume control rocker on the left side of the device and turn up volume. Now I am out of vibrate mode for the ringer, which means I have remember to go back to set the rocker to vibrate. Yes, I have the phone set so that ring and system should be individually adjustable; it does not really work that way, but that isn't the point here.
The Point. Can anyone recommend a cab, registry tweak or adjustment so that my media player volume is disassociated with the media player volume? I would like to have volume for my media player while never having ringer volume.
Thank You,
Ndmand
settings/sound & display and turn single volume off. You will now have separate volumes for ringer and sytem.
it does not work. that was the point of my post
Not so.
Ndmand
Maybe Volumex?
http://volumex.jdbp.mobi/dwn/Volumex.CAB
Ndmand said:
Hello All,
I always want vibration only on ring with no sound. When I set ring to vibrate, that also turns off the sound on the included media player which means no sound for hearing voice mails. To hear voice mail, I have to go to the volume control rocker on the left side of the device and turn up volume. Now I am out of vibrate mode for the ringer, which means I have remember to go back to set the rocker to vibrate. Yes, I have the phone set so that ring and system should be individually adjustable; it does not really work that way, but that isn't the point here.
The Point. Can anyone recommend a cab, registry tweak or adjustment so that my media player volume is disassociated with the media player volume? I would like to have volume for my media player while never having ringer volume.
Thank You,
Ndmand
Click to expand...
Click to collapse
I'm not sure (I'm currently back on my Blackstone), but couldn't you select a "ringtone type" at the sound settings? e.g. "ring"; "ring+vibrate"; "ring, then vibrate"; "vibrate only";... and just select the "vibrate only" option?
I have this options in my Blackstone, but I'm not 100% sure if it's still present in HD2...
Grtz,
Degake
Thank You, Coincidence
Thanks for your reply. I really do appreciate it. As fate would have it, I happened to have figured this out yesterday, and it is exactly how you say. The ring tone type is now set to "vibrate" and it seems that I can use the volume key for the more useful purpose of making sure I can hear voice and music. Thanks again for your help.
Ndmand
Try app fix of Miri:
Thanks, Problem Fixed
Thanks post&telecommunications and pckshd and degake:
Sorry, I missed a couple of your posts. I think my problem is fixed, but thanks for the cabs. I am new to Windows Mobile and am excited about the cabs yo posted. I may want to install them just to check them out. Again, thanks so much for your response and your obvious willingness to help others through this forum.
Ndmand
I am a little confused. Happy your request was answered. But maybe you can enlighten me to why the dual volume doesn't work. Or exactly why it didn't work for you. On my T9193 I set it to have dual volume. I keep the ringer volume on vibrate and the system volume turned up. Nothing else is affected by having the ringer volume on vibrate. Texts, emails, all notification sounds come through perfectly except for phone ringer. Did I miss something?
is it normal that if I set ringtone to "vibrate" from settings tab-phone settings I have sound on other apps (e.g. music player) but if I set ring to vibrate using volume button (double volume on) all device get silent ?
So, the OnePlus One has amazing speakers, the best speakers I've had on a phone so far, but unfortunately, the speakers are so loud that the notifications start disturbing the people around me, so I have to turn them down, but that does not work, because I cannot unlink the volume of the notifications from the ringtone volume, so I am FORCED to have the ringtone volume down, so the notifications do not annoy the people around me.... and I DO get a lot of notifications.
I tried everything, but although the settings show that the ringtone volume and notifications volume are unlinked, it still doesn't work.
Someone please help me, I'm tired of having to keep my ringtone volume down just for this...
OnePlus One, stock ROM, 5.1.1 / Cyanogen OS version 12.1-YOG4PAS1N0
I'm rooted on latest a11. I set my Phone ringtone to a ring sound. When I slide the Phone volume slider to change volume, the alarm ringtone rings. I may need to reflash factory image if no one else has this issue.
Edit: NM, Dumbass here. Thought Phone volume should be it's ringtone, but Ring and notification volume uses it.
I use a bluetooth headset almost all of the time. Sometimes, the volume of the notification sound gets very quiet. Inaudible, really, unless I turn up the headset volume and the ring and notification volume slider to the maximum volumes. Even at the maximum volume settings, I can barely hear the notification sounds. I am able to reproduce the problem by going into the settings and changing the default notification sounds. I can just keep selecting different sounds, listening to the previews and suddenly, the volume will go quiet.
I am totally stock, not unlocked or rooted in any way. It was happening on Android 11 and is still happening on Android 12. Can anyone help me fix this problem?