Hello I'm looking for information on what current magisk version that is available for Google pixel in the latest magisk manager any help thank you I'm trying to gain root and safety-net pass I tried googling but no real clear answers and I'm not locked down to a carrier on device it's all from Google just confused I flash rom and throw through twrp and I need root
I'd say just flash latest stable magisk, that's all I've ever done (not currently rooted) and it's usually worked perfectly. If in doubt it could be worth a look through the magisk discussion thread for any info. Last time I used it it had to be flashed after ROM and gapps and after you had first booted into system at least once, not sure on the safety test bit as it don't bother me but there are magisk modules or edits to the buildprop that can get round that.
Hope that's some help mate
Here what's going on and I'm looking for help
There are magisk modules that will resolve that, If I remember right it's a build fingerprint issue so if the ROM build fingerprint don't match what's on Google's approved list you get that occur.
Can't remember the module names but it's something along the lines of props config or safetynet pass or similar named modules
i want to say thank you for that push i know what you mean now and i really thank you
https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
I was about to put this in the main discussion thread of FlashFire, but it was closed so i decided to post it here.
So this is what happened, i rooted my Xiaomi Redmi Go with Magisk, the latest one, and when i opened FlashFire, it basically said that i have root, but access couldn't be acquired. It added "Found root: 19.4:MAGISKSU".
It was said in the Supported roots that Magisk is included so can't i use this app? I also tried to change my SELinux to permissive mode by going to the terminal and putting "setenforce 0", and the app still won't let me.
Any solutions to this? I was about to do perform a live backup through this app because the current TWRP version for this device is defective for my phone, the Backup option doesn't work and I've been looking for ways to backup my phone without custom recovery, but still with root of course.
Any help would be appreciated, thankyou!
Flashfire is discontinued so it is no longer compatible with the latest versions of Magisk
You might try going back to a older Magisk. It's definitely going to be before 19.3 but it may need to be older than that. There are two ways of doing this.
Set a custom channel in Magisk manager (install the older manager first).
Download the older release. If you're not familiar with github, expand the assets link under the release you want. The zip files will be listed there.
Make sure to remove the newer Magisk first.
spider1163 said:
Flashfire is discontinued so it is no longer compatible with the latest versions of Magisk
Click to expand...
Click to collapse
So is there solution that i can bypass that error ?
This evening, I tried flashing a Magisk module that replaces the stock keyboard sounds. In OOS 9, this worked. For some reason, it doesn't in OOS 10. I have the latest stable build of Magisk and after successfully flashing that same module (I didn't get any errors during the install), it no longer does anything. I can see the files are in /system/media/audio/ui. However, Gboard doesn't recognize those files; Neither does other keyboard apps like SimpleKeyboard.
It's not a huge deal for me right now, but I'm curious to know if this is an issue with other OOS 10 users (specifically, OP 6 users).
Hi,
with pleasure I share the module for center/right clock in the status bar, the module is created by @Tulsadiver, tested by me on Oneplus 7 Pro with firmware version as specified file name.
ESSENTIAL PREREQUISITE: BEFORE INSTALLING THE MOD, IT IS NECESSARY TO INSTALL, IF NOT PRESENT, THE "OVERLAY MOUNT FIX" MODULE BY @Zackptg5 DOWNLOADABLE FROM MAGISK MANAGER, WITHOUT THIS THE CLOCK MODULE WILL NOT WORK!
It is a magisk module and I want to repeat that it can only be used on Oneplus 7 Pro.
The module can only be used with the firmware release indicated in the file name, it will be my commitment to update the thread with the release of future updates.
I'm trying it and it doesn't seem to show any problems but I still recommend making a backup before trying it.
To remove the mod, simply uninstall the module using magisk manager or, if this is not usable, from recovery twrp, using the file manager deleting the module "OP7_VrThemer_OPSystemUI" that you find at the following path:
/data/adb/modules
Update: How to remove the module in case of failure (procedure valid for any magisk module):
Turn off the phone by pressing and holding the power button for a few seconds.
Turn the phone back on.
After the "Bootloader Unlocked" warning appears, press and hold down the "Volume up" and "Volume down" keys at the same time, until the startup animation appears.
The phone will boot correctly but will be operating in "Safe mode".
Now restart your phone normally.
The phone will boot in standard operating mode but with all magisk modules disabled.
Remove the magisk module that caused the problem and enable your other modules and reboot one last time.
The phone operating as if nothing had happened
My biggest, massive, THANKS go to @Tulsadiver, for sending me his xml file with the modifications necessary to obtain the movement of the clock and for passing me Its VRThemer module, without your help I could not have avoided the bootloop ... I can say that the mod is all from @Tulsadiver, the mod is all the result of his work and his expertise, I have only been a tester and shared his fantastic work with you.
Thanks also to @dladz, for giving me his support and advice!
Attention each module you find in this post is specific to the firmware indicated in the file name, with each new firmware it will be my concern to release the new updated module.
Flashing always at your own risk!!!
To be installed only with Magisk Manager, if installed by TWRP it does not work.
Please read all indications before proceeding with the installation, module has been tested and is working on the OxygenOS 10 and OxygenOS 11 based firmware, NOT tested with other firmware and non-OxygenOS based roms.
P.S. To complete the information, I have not had the opportunity to try the same module with other firmware versions, it could work but I have no way of knowing, if you decide to try remember that it should only be used on Oneplus 7 Pro with firmware OxygenOS 10 and OxygenOS 11 and that you do at your own risk. I test the module with the firmware specified in the file name before publishing it, if it is here for you it means that it has not given me any problems.
Flashing always at your own risk!!!
This sounds awesome. Thank you very much. I know it's a lot to ask, but would you be able to make a version that moves the clock to the right? That would be truly amazing if at all possible
a63548 said:
This sounds awesome. Thank you very much. I know it's a lot to ask, but would you be able to make a version that moves the clock to the right? That would be truly amazing if at all possible
Click to expand...
Click to collapse
Check your pm
You should post the right clock as well
Just a humble request, can you create a telegram group to support and test your module, it will be faster
a63548 said:
This sounds awesome. Thank you very much. I know it's a lot to ask, but would you be able to make a version that moves the clock to the right? That would be truly amazing if at all possible
Click to expand...
Click to collapse
mholloway said:
You should post the right clock as well
Click to expand...
Click to collapse
work in progress...stay tuned
Added to the first post mod for right clock and updated the module for center clock (if you want to update remove the old release, restart and install the new one).
I await your feedback.
Thanks to @Tulsadiver for his patience in supporting me and for his great availability!
New update of the "center clock" module, fixed clock displayed in the lockscreen defect, I recommend removing those installed up to now and replace with the latter released
Thanks for the mod. I tried the right clock mod but it did not work. Just to be fair, I tried on stable OS 10.3.5 and NOT on beta OS. Mod installed w/o any errors and I can see this mod installed in the Magisk Manager but clock is still on the left side. Rebooted twice, still no go. May be the beta 18 OS is the only OS that support this module. Keep up the good work. Thanks.
Gr8man001 said:
Thanks for the mod. I tried the right clock mod but it did not work. Just to be fair, I tried on stable OS 10.3.5 and NOT on beta OS. Mod installed w/o any errors and I can see this mod installed in the Magisk Manager but clock is still on the left side. Rebooted twice, still no go. May be the beta 18 OS is the only OS that support this module. Keep up the good work. Thanks.
Click to expand...
Click to collapse
Sorry my mistake, try like this:
Remove the right clock module
Restart
Install "Overlay mount fix" module by @Zackptg5 from magisk manager
Restart
Reinstall the clock module
The overlay mount fix module is necessary for the mod to work and I forgot to write it, sorry.
I await feedback
Installed right clock on beta 18,not working.
Magisk 20.04
Magisk manager 8.0.2
mholloway said:
Installed right clock on beta 18,not working.
Magisk 20.04
Magisk manager 8.0.2
Click to expand...
Click to collapse
Try like this:
Remove the right clock module
Restart
Install "Overlay mount fix" module by @Zackptg5 from magisk manager
Restart
Reinstall the clock module
I await feedback
dianoandr said:
Try like this:
Remove the right clock module
Restart
Install "Overlay mount fix" module by @Zackptg5 from magisk manager
Restart
Reinstall the clock module
Click to expand...
Click to collapse
That worked
mholloway said:
That worked
Click to expand...
Click to collapse
My mistake, sorry to you and everyone, I have the "overlay mount fix" module installed by default in my phone and I have not taken into account that it is necessary for the module to work...sorry again
dianoandr said:
Sorry my mistake, try like this:
Remove the right clock module
Restart
Install "Overlay mount fix" module by @Zackptg5 from magisk manager
Restart
Reinstall the clock module
The overlay mount fix module is necessary for the mod to work and I forgot to write it, sorry.
I await feedback
Click to expand...
Click to collapse
I know it worked for someone else but it really messed up my phone. Phone boots fine but screen is dark i.e. no display anymore. I am on OS 10.3.5 and the current Magisk 20.4. I'll use the fast boot zip when I get home to bring the phone back to life. Thanks!
Gr8man001 said:
I know it worked for someone else but it really messed up my phone. Phone boots fine but screen is dark i.e. no display anymore. I am on OS 10.3.5 and the current Magisk 20.4. I'll use the fast boot zip when I get home to bring the phone back to life. Thanks!
Click to expand...
Click to collapse
Go to recovery, with the integrated file manager function, delete the module "OP7_VrThemer_OPSystemUI" that you find at the following path: /data/adb/modules and reboot
dianoandr said:
Go to recovery, with the integrated file manager function, delete the module "OP7_VrThemer_OPSystemUI" that you find at the following path: /data/adb/modules and reboot
Click to expand...
Click to collapse
That did the trick. Thanks for your help. My phone came back to life and working fine
So, is it safe to say that right side clock module only work with OS 18 beta and not the latest stable OS 10.3.5?
Thanks again for your help.
Gr8man001 said:
That did the trick. Thanks for your help. My phone came back to life and working fine
So, is it safe to say that right side clock module only work with OS 18 beta and not the latest stable OS 10.3.5?
Thanks again for your help.
Click to expand...
Click to collapse
Happy it's back to normal, it's a trick to keep in mind for emergency situations.
The change itself is the same for all versions of oxygenos based on android 10, it probably changes something else in the apk and as a consequence the .xml file compiled with the mod, crashes your opsystemui.
I sent you a p.m.
I can confirm that mod works fine on Beta 19 as well? Thanks
Gr8man001 said:
I can confirm that mod works fine on Beta 19 as well Thanks
Click to expand...
Click to collapse
Great news, however as soon as I update my phone, I check that there are no major changes related to the apk and eventually update the modules to avoid instability.
I should be getting the device in a few days and want to install EdXposed ASAP. I have found a few references of folks who did this but it's not clear whether it's on Android 11 or not.
If any one has been able to install EdXposed and get it running, it would be great if they can share the links to the framework and manager they used. And of course, their experience and tips
This would help the community of Pixel 4a users
Here is how I got it working
Obviously you have a rooted device running Android 11, with Magisk installed.
Install EdXposed Manager v4.5.7.
From the canary tab download the YAHFA/ Sandhook drivers (zip) . Note that downloaded version may have a different name from the file name in canary tab, in my case
Which one did you flash? Yahfa or Sandhook?
Neither one of those show up for me. I tried flashing framework and it says incompatible device.
Okluzhion said:
Which one did you flash? Yahfa or Sandhook?
Click to expand...
Click to collapse
Sorry for the delay. I didn't get the notification
YAHFA. But note that when I flashed, every thing was fine. In between, probably some Play Store updates broke camera and recorder. Uninstalling updates fixed the problem