Database Info

Cannot start ROM / permanent reboot into recovery

Hallo,
I have a problem. I flashed newest TWRP 2.8.7.1 (I also tried 2.8.7.0) onmy Mi4C and installed some ROMS (sMiUI, Decato, CM12.1) but even if flash of TWRPs and installation of ROMS was successful without error, the device is always booting into Recovery/TWRP.
So problem is that device is not starting into system!
- I tried with power button reset
- I tried with "reboot to system"
- I tried with battery removal!
- I also tried new installation of TWRP and/or several ROMS. (e.g. sideloading ADP is also working)
- I also made some (full) WIPEs / Fix Permissions
but it is always starting only to TWRP.
After device is starting, MUI-symbol appears for 5-10 seconds and then TWRP is loading, but not ROM.
What can I do? Maybe installation a new Kernel or something?
thanks in advance,
Jimmy

jjeans said:
Hallo,
I have a problem. I flashed newest TWRP 2.8.7.1 (I also tried 2.8.7.0) onmy Mi4C and installed some ROMS (sMiUI, Decato, CM12.1) but even if flash of TWRPs and installation of ROMS was successful without error, the device is always booting into Recovery/TWRP.
So problem is that device is not starting into system!
- I tried with power button reset
- I tried with "reboot to system"
- I tried with battery removal!
- I also tried new installation of TWRP and/or several ROMS. (e.g. sideloading ADP is also working)
- I also made some (full) WIPEs / Fix Permissions
but it is always starting only to TWRP.
After device is starting, MUI-symbol appears for 5-10 seconds and then TWRP is loading, but not ROM.
What can I do? Maybe installation a new Kernel or something?
thanks in advance,
Jimmy
Click to expand...
Click to collapse
Download fastboot rom and flash it

thank you that worked..
but I have still the problem when I flash several versions of TWRP, that a reboot/start of the system will always end up within the recovery.
Only a a reflash of fastboot rom helps, but then I have the old mi recovery that does not work for other ROMs :/
a strange behaviour.
So I can flash TWRP, but it is not possible to boot into the system...
Without a newer TWRP that can "boot into system" I cannot use Custom ROMS

jjeans said:
thank you that worked..
but I have still the problem when I flash several versions of TWRP, that a reboot/start of the system will always end up within the recovery.
Only a a reflash of fastboot rom helps, but then I have the old mi recovery that does not work for other ROMs :/
a strange behaviour.
So I can flash TWRP, but it is not possible to boot into the system...
Without a newer TWRP that can "boot into system" I cannot use Custom ROMS
Click to expand...
Click to collapse
How do you flash recovery tell me the procedure?

Talha7866 said:
How do you flash recovery tell me the procedure?
Click to expand...
Click to collapse
Hallo,
I used some manuals for flashing.
e.g.
en.miui.com/thread-166465-1-1.html
gammerson.com/2015/10/install-twrp-recovery-mi4c-root-it.html
+ some manuals from decuro rom and sMiUI Rom
In summary:
1. Pre steps: Download USB & Adb drivers / Download TWRP Recovery 2.8.7.0 for Xiaomi Mi4C / I also tried 2.8.7.1
2. Flashing: Boot phone into fastboot --> Connect phone with USB (I tried before and after boot to fastboot) --> CMD --> "fastboot flash recovery" <recovery-name>.img
3. After successful flash of 40-50 MB TWRP recovery I tried CMD "fastboot reboot" / I tried also without reboot command (with Vol+ & Power) / I tried also only with power button
Always system boots to TWRP recovery.
When I choose ROM afterwards with new TWRP recovery and flash it, it says successful installed, but reboot does not start to ROM
At the moment I always do fastboot rom reflash, that old system will come back and work. Flashing ROMS with old system (via updater app and old Miui recovery) is not working, it is always update error, even if I rename ROM to "update.zip".
What I never did rooting the phone, so flashify says "device not rooted". I do not know If I have to root, I assume not. I do not want root, because I will use a company app that needs an unrooted phone.
thanks,
Jimmy

jjeans said:
Hallo,
I used some manuals for flashing.
e.g.
en.miui.com/thread-166465-1-1.html
gammerson.com/2015/10/install-twrp-recovery-mi4c-root-it.html
+ some manuals from decuro rom and sMiUI Rom
In summary:
1. Pre steps: Download USB & Adb drivers / Download TWRP Recovery 2.8.7.0 for Xiaomi Mi4C / I also tried 2.8.7.1
2. Flashing: Boot phone into fastboot --> Connect phone with USB (I tried before and after boot to fastboot) --> CMD --> "fastboot flash recovery" <recovery-name>.img
3. After successful flash of 40-50 MB TWRP recovery I tried CMD "fastboot reboot" / I tried also without reboot command (with Vol+ & Power) / I tried also only with power button
Always system boots to TWRP recovery.
When I choose ROM afterwards with new TWRP recovery and flash it, it says successful installed, but reboot does not start to ROM
At the moment I always do fastboot rom reflash, that old system will come back and work. Flashing ROMS with old system (via updater app and old Miui recovery) is not working, it is always update error, even if I rename ROM to "update.zip".
What I never did rooting the phone, so flashify says "device not rooted". I do not know If I have to root, I assume not. I do not want root, because I will use a company app that needs an unrooted phone.
thanks,
Jimmy
Click to expand...
Click to collapse
I have had the same issue, and read somewhere that it is because you tried flashing a rom in stock recovery and failed, that causes recovery bootloop. I was in same position other than i erased most og my partitions except recovery, and then installed fastboot rom, and it was all good again. Not saying ypu should erase any partitions! Rather not try and flash anything in stock recovery ever.

zhart said:
I have had the same issue, and read somewhere that it is because you tried flashing a rom in stock recovery and failed, that causes recovery bootloop. I was in same position other than i erased most og my partitions except recovery, and then installed fastboot rom, and it was all good again. Not saying ypu should erase any partitions! Rather not try and flash anything in stock recovery ever.
Click to expand...
Click to collapse
Thank you for your answer.
So I can do:
1. Wipe all data (it is the only option in recovery)
2. Re-flash fastboot rom
3. Try again to flash new recovery & install custom ROM
Is that correct?
What partition can I securely erase? and how? because erase is only possible with newer Recovery.

jjeans said:
Thank you for your answer.
So I can do:
1. Wipe all data (it is the only option in recovery)
2. Re-flash fastboot rom
3. Try again to flash new recovery & install custom ROM
Is that correct?
What partition can I securely erase? and how? because erase is only possible with newer Recovery.
Click to expand...
Click to collapse
I would clean install fastboot rom, and then install the latest recovery, and try to install a rom. All from buttom so you know exactly what you have done
I accidentaly erased my partitions with fastboot. Data, boot, and internal ? I think. Would not recomend it.

Sorry, what exaclty is a fastboot rom and where do i get it?

zhart said:
I would clean install fastboot rom, and then install the latest recovery, and try to install a rom. All from buttom so you know exactly what you have done
I accidentaly erased my partitions with fastboot. Data, boot, and internal ? I think. Would not recomend it.
Click to expand...
Click to collapse
I don't know what happens all the time.
Currently I used MiFlash to make a clean fastboot install. I choosed in MiFlash "flash_all.bat" to do it. (flash_all.bat means everything was reinstalled, also recovery.img). Afterwards everything was normal, MiRecovery 2.x and Mi4C MiUI 7 chinese version was installed without error. But after manual flashing TWRP with "fastboot flash recovery xxx", the recovery loop was again! :/
So AGAIN I made a clean fastboot install again with MiFlash application, but this time I REPLACED the recovery.img with the newest TWRP (renamed to recovery.img) within the fastboot rom installation folder "images". I could see that MiFlash flashed THIS! recovery.img, but after that again the old Mi Recovery was on the device and no TWRP. But why? I replaced the original recovery.img file! How can that happen?
The flash_all.bat included flashing recovery and I could confirm it during the fastboot flash. Strange.
I used fastboot rom libra_images_V7.0.16.0.LXKCNCI_20151104.0000.4_5.1_cn
MiFlash newest version and I tried with 2 TWRP versions (one from decuro and one from sMiUI)

Maybe my phone has a problem with flahing recoverys in general I don't know.

jjeans said:
Maybe my phone has a problem with flahing recoverys in general I don't know.
Click to expand...
Click to collapse
it sound very strange i did all these steps and my phone was all good after it. is it the newest recovery? the one with material theme and touch fix you are using? if not, then thats the only difference between your procedure and mine :/
i hope you can fix it
Edit: I can see that i have the following fastboot roms downloaded, so i used one of these:
libra_images_V7.0.6.0.LXKCNCI_20150917.0000.1_5.1_cn_4dd76a55cb.tgz
or libra_images_V7.0.15.0.LXKCNCI_20151104.0000.4_5.1_cn_f6e955ee14.tgz

What I would do, is fastboot original ROM, reboot to recovery, factory reset, recboot to fastboot to re-flash TWRP and then command "fastboot boot recovery" to get to TWRP and install your ROM.
Didn't has this pb on Mi4c, but had it a few times on Nexus5.
Hope this helps...

Hello, don't know if applicable. I've read on mi forums that dev Roms need dev recovery, that's different from twrp for stock rom.....

guegangster said:
What I would do, is fastboot original ROM, reboot to recovery, factory reset, recboot to fastboot to re-flash TWRP and then command "fastboot boot recovery" to get to TWRP and install your ROM.
Didn't has this pb on Mi4c, but had it a few times on Nexus5.
Hope this helps...
Click to expand...
Click to collapse
Hallo,
thank you, that worked for me finally
I have now used another TWRP 2.8.7.1 with touch-issue, but that is now no problem.
I flashed also xiaomi.eu rom, for now seems to be stable and cleaned.
strange everything, but now it is fixed.
BR,
Jimmy

Lenovo p2 blue led after magisk update

I am creating this post to help p2 community who is stuck on blue led after magisk update on custom rom
I have encountered this issue twice on my phone after a magisk update.
This happens when you patch the update directly from magisk manager.
The first time I was stuck with this issue on custom pie rom, I searched on other threads and got to know that device needs to reset to stock rom by flashing fast boot stock files on download mode, just search it, you will get link with details
However, this was a very complex task , also I lost my data in the process after flashing the data partition. From there , I went on to flash custom rom ,then installed apps , the process took the whole day
The second time when I again stuck with blue led , I was on another pie rom, This time I recovered my device without having to go over flashing all things again.
Please find the detailed step below , as I think it may help someone in such critical issues
1) Go to download mode, flash treble supported twrp for treble supported pie roms, by using command - fastboot flash recovery name.img
2) Temporary boot into same twrp , command is -
fastboot boot name.img
3) Once in twrp, go to reboot, reboot to recovery
4) Once in recovery , copy following files into internal storage - magisk.zip, magiskunistaller.zip, twrprecovery.img ( one used in step 1 ), boot.img ( extract it from existing rom package.zip)
5) Flash magisk uninstaller first
6) Go to install, install image
flash boot.img by selecting boot partition
if it get stuck , again go in twrp using step 3 and try again, it will work
flash twrprecovery.img by selecting recovery partition
7) Flash magisk zip now
8) If all goes well , you phone will boot into existing rom
Please like the post if you had same issue and are able to recover it from mentioned steps

I got into this trouble too, when direct installing magisk from v19.2 to v19.3. The magisk manager shows that it's finished installing v19.3 and reboot. Then the phone shows the white Lenovo screen, then turns dark, and vibrate for a few seconds with blue led lighting up, and finally just freeze. No bootloop, just a dark screen with blue notification led.
What I did was going to twrp (the one recommended in LOS 16.0 thread) by pressing vol up + down + power button until the white Lenovo screen come up, then release. I just reflash my current ROM (RR-P-v7.0.2-20190604-kuntao-Official.zip) using adb sideload. It finished flashing, click reboot, and finally managed to boot into system. No data loss, magisk v19.3 worked, and no magisk uninstaller required.
During the flashing process, I noticed that Magisk v19.3 was being auto flashed, so the magisk manager direct install probably somehow mess up with the boot.img after installing v19.3.

I was not able to go in twrp by any means , so I mentioned steps via download mode
Regarding your way to sideload and dirty flash whole rom , it didnt worked with me previously, so I cannot say about that, it was going back to blue led after reflashing
Regarding magisk installing and removing steps, anyone can ignore this steps and try if it works for them.

Just uninstall the magisk and reinstall it.
I have also faced same error previously and reinstalled magisk and it worked.

Someone please make a video of this and post it here
Rakxx said:
1) Go to download mode, flash treble supported twrp for treble supported pie roms, by using command - fastboot flash recovery name.img
2) Temporary boot into same twrp , command is -
fastboot boot name.img
3) Once in twrp, go to reboot, reboot to recovery
4) Once in recovery , copy following files into internal storage - magisk.zip, magiskunistaller.zip, twrprecovery.img ( one used in step 1 ), boot.img ( extract it from existing rom package.zip)
5) Flash magisk uninstaller first
6) Go to install, install image
flash boot.img by selecting boot partition
if it get stuck , again go in twrp using step 3 and try again, it will work
flash twrprecovery.img by selecting recovery partition
7) Flash magisk zip now
8) If all goes well , you phone will boot into existing rom
I have this issue but I don't know how to do these steps please make a YouTube video and post a link here (I'm new to this)
Click to expand...
Click to collapse

Oneplus 7 Pro Bootloot

Hello, So i tried to install GPS joystick privacy mode app as a system app first thru titanium backup then ..., i rebooted and now im on boot loop, what do i do?
Any help is appreciated, Thanks
{Mod edited}

Hold Power + vol up + vol down for several seconds should put you in bootloader. Or alteranately, Power+vol down for several seconds should send you to TWRP if you have it installed. From there, I'm thinking you may need to flash the stock ROM again, since you were messing with the system partition, and the phone is not booting now. Either flash stock ROM in TWRP, or use the fastboot stock ROM.

I didn't have twrp installed and i still dont, i patched the boot image with magisk and all i have is root cause i cant seem to keep TWRP installed after 9.5.3, im currently on 10.3.0

cmurder61 said:
I didn't have twrp installed and i still dont, i patched the boot image with magisk and all i have is root cause i cant seem to keep TWRP installed after 9.5.3, im currently on 10.3.0
Click to expand...
Click to collapse
You should be able to fastboot flash stock boot.img from the fastboot ROMs to get the phone running again: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
This will unroot the phone. But you should be able to easily root again by the method you did originally.
What is the problem you are having with installing TWRP? You haven't specifically described how you tried to install. I've had no issues using the TWRP installer zip, after multiple updates.

You need to re flash stock so, boot lastest twrp (fastboot boot twrp.img) and flash lastest stock rom.
And if you need an app as system use magisk module App Systemizer (you also need busybox module and Termux app from playstore) this is the only way (that I known) to convert user apps to system
Sent from my OnePlus7Pro using XDA Labs

redpoint73 said:
You should be able to fastboot flash stock boot.img from the fastboot ROMs to get the phone running again: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
This will unroot the phone. But you should be able to easily root again by the method you did originally.
What is the problem you are having with installing TWRP? You haven't specifically described how you tried to install. I've had no issues using the TWRP installer zip, after multiple updates.
Click to expand...
Click to collapse
Ive tried that it only boots to recivery, i restarted my phone completely with msm its wokring fine now but even after i root on 10.3.0 i still cant get twrp
when i try to install "fastboot flash twrp" it goes thru but it always boot loops to fastboot but when i flash the stock boot image it goes to normal and i can boot into the phone again

RokCruz said:
You need to re flash stock so, boot lastest twrp (fastboot boot twrp.img) and flash lastest stock rom.
And if you need an app as system use magisk module App Systemizer (you also need busybox module and Termux app from playstore) this is the only way (that I known) to convert user apps to system
Sent from my OnePlus7Pro using XDA Labs
Click to expand...
Click to collapse
tried that first part too, cant get into twrp and that makes sense now, i installed busy box but never opened the app to install to system/xbin

here's how ive done my part so far.. ever since i bricked my device last feb 24 , rendering it totally unresponsive.. that not even vol up & power button dont work
1. had to use msm tool just to boot my device. successfully boot my device to 9.5.3
2. device seemed to have a locked bootloader again so i un.lock it again. downloaded a patched 9.5.3 boot.img and flashed it via fastboot
3. successful root confirmed..
4. downloaded twrp 3.3.1-75 unofficial installer.. about 17.5mb. flashed it thru magisk as a module.. then install magisk ( as recommended) then reboot.
5. after a reboot.. and setting it up to my liking,, i reboot to twrp to flash the latest 10.3.1 stable rom..
6. flash twrp installer again.
7. hit reboot then choose Recovery . phone reboot to recovery again
8. flash magisk.zip which i downloaded earlier. then reboot.
done
updated to 10.3.1 with magisk & twrp intact..
btw.. i really dont know how to force my phone to reboot to twrp via PC ADB fastboot command.. easiest way for me to install TWRP is by flashing the TWRP INSTALLER as magisk module

cmurder61 said:
tried that first part too, cant get into twrp and that makes sense now, i installed busy box but never opened the app to install to system/xbin
Click to expand...
Click to collapse
Use busybox magisk module, don't install busybox apps!
Sent from my OnePlus7Pro using XDA Labs

cmurder61 said:
when i try to install "fastboot flash twrp" it goes thru but it always boot loops to fastboot but when i flash the stock boot image it goes to normal and i can boot into the phone again
Click to expand...
Click to collapse
That is because that is NOT the correct way to install TWRP img. You need to fastboot boot TWRP, then once in TWRP flash the TWRP installer zip, as I already mentioned.
This is described in the TWRP dev's thread (and you will see no mention of fastboot flash TWRP).
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322
Also make sure you use a current version of TWRP (latest is unofficial -76) which you can get from the above link.

redpoint73 said:
That is because that is NOT the correct way to install TWRP img. You need to fastboot boot TWRP, then once in TWRP flash the TWRP installer zip, as I already mentioned.
This is described in the TWRP dev's thread (and you will see no mention of fastboot flash TWRP).
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322
Also make sure you use a current version of TWRP (latest is unofficial -76) which you can get from the above link.
Click to expand...
Click to collapse
ive tried that still didn't work but illl try again i guess

santiagoruel13 said:
here's how ive done my part so far.. ever since i bricked my device last feb 24 , rendering it totally unresponsive.. that not even vol up & power button dont work
1. had to use msm tool just to boot my device. successfully boot my device to 9.5.3
2. device seemed to have a locked bootloader again so i un.lock it again. downloaded a patched 9.5.3 boot.img and flashed it via fastboot
3. successful root confirmed..
4. downloaded twrp 3.3.1-75 unofficial installer.. about 17.5mb. flashed it thru magisk as a module.. then install magisk ( as recommended) then reboot.
5. after a reboot.. and setting it up to my liking,, i reboot to twrp to flash the latest 10.3.1 stable rom..
6. flash twrp installer again.
7. hit reboot then choose Recovery . phone reboot to recovery again
8. flash magisk.zip which i downloaded earlier. then reboot.
done
updated to 10.3.1 with magisk & twrp intact..
btw.. i really dont know how to force my phone to reboot to twrp via PC ADB fastboot command.. easiest way for me to install TWRP is by flashing the TWRP INSTALLER as magisk module
Click to expand...
Click to collapse
See the way u did it is diff, i did not root first before installing twrp or install twrp as a magisk mod, what is the mod for magisk? where do i get it

cmurder61 said:
See the way u did it is diff, i did not root first before installing twrp or install twrp as a magisk mod, what is the mod for magisk? where do i get it
Click to expand...
Click to collapse
i just simplified it as magisk mod.. but in TWRP THREAD,, its named by maoronofrio as TWRP UNIFIED UNOFFICIAL INSTALLER
and it can only be installed by installing it as magisk module
here's the link
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3932943

Twrp boot loop

I patched twrp img with magisk and then ran fastboot flash boot "patched file" in fastboot mode. Now, whenever and however I start my system I get only the twrp menu. My device is Lenovo tab 4 8(tb-8504f)

Re-flash tablet's Stock ROM to get rid off of all modifications you applied so far.

re flash the ROM. dont flash the magisk or twrp after it. you will be saved.
you can use twrp via adb boot twrpxx.img So flashing it not needed.
Magisk installation has now become trickier simply flashing via recovery won't work

jwoegerbauer said:
Re-flash tablet's Stock ROM to get rid off of all modifications you applied so far.
Click to expand...
Click to collapse
hello thanks for replying. Could you provide me with the official rom. I've found one but not sure how reliable it is. I also in the twrp menu installed the patched twrp image from sd card to boot. After rebooting I again get the twrp menu but the file is not being show in sdcard anymore.

suraj123 said:
re flash the ROM. dont flash the magisk or twrp after it. you will be saved.
you can use twrp via adb boot twrpxx.img So flashing it not needed.
Magisk installation has now become trickier simply flashing via recovery won't work
Click to expand...
Click to collapse
I also in the twrp menu installed the patched twrp image from sd card to boot. After rebooting I again get the twrp menu but the file is not being show in sdcard anymore. Does this include what you've refused me to do so? And can u pls provide me the official link?

Unable to make a stable boot image?

Hello, I had my OP7P rooted on android 11, but after updating to 11.0.6.1.GM21AA, I just couldn't get root to work.
I downloaded the OxygenOS 11.0.6.1.GM21AA from oneplus.com, extracted the boot.img, downloaded the new (supposedly with Android 11 support) TWRP (twrp-3.6.0_11-0-guacamole.img), booted to the TWRP, and installed root using the magisk APK, when I booted the phone had "Android Intellegnce stopped working" all sort of apps stopped working as well and some also crashed when I tried to open them, I flashed the original boot image and after some research I saw that using Magisk Canary build might help, so I tried with it too and same result.
I tried installing root using Magisk.apk, I tried patching a boot image using Magisk (both versions) but to no avail.
Some notes:
-Using the Canary build actually rooted my phone unlike the normal Magisk, but with problems still.
-When trying to use TWRP's "Flash Current TWRP" option, it overwrite my boot image and when trying to boot to fastboot or system it booted to recovery instead.
I will be glad for any help because having an unrooted device sucks.
Thanks in advance and sorry for any grammar mistakes (English is not my first language)

May be the first thing I'd think of trying it to disable any/all Magisk module installed.
Then, with the full OTA ROM stored in the main storage directory of your device... Basically a dirty Flash using the same OOS version you are using now and that should save the wipe/reset...
OTA Flash that and do not reboot and in Magisk manager check to see if manager is able to install Magisk as in install after OTA (?). That should work and then reboot device then verify. Don't forget to re-enable and Magisk modules...
Hope that can and will point you into the right direction.
I've not bothered with TWRP since I installed it then the next OTA went back to stock recovery. So, might be worth skipping TWRP for root as is not required so far as I can tell ... But I also have a Windows computer set up to flash via adb command alternatively.
Edit:. Think I forgot to say that the OTA update changed my TWRP back to stock recovery... But that's easy enough it change if desired

wugga3 said:
May be the first thing I'd think of trying it to disable any/all Magisk module installed.
Then, with the full OTA ROM stored in the main storage directory of your device... Basically a dirty Flash using the same OOS version you are using now and that should save the wipe/reset...
OTA Flash that and do not reboot and in Magisk manager check to see if manager is able to install Magisk as in install after OTA (?). That should work and then reboot device then verify. Don't forget to re-enable and Magisk modules...
Hope that can and will point you into the right direction.
I've not bothered with TWRP since I installed it then the next OTA went back to stock recovery. So, might be worth skipping TWRP for root as is not required so far as I can tell ... But I also have a Windows computer set up to flash via adb command alternatively.
Edit:. Think I forgot to say that the OTA update changed my TWRP back to stock recovery... But that's easy enough it change if desired
Click to expand...
Click to collapse
Hello, thanks for the reply, I wanna get a few things straight before doing anything that have the potential to brick my phone.
1. My phone rn isn't rooted, so I cant uninstall or disable Magisk modules, I CAN root my device but it is very unstable and im not sure doing it is a good idea, maybe there's another way to disable them?
2. What do you mean by dirty flash? Using the device update section and selecting the official OOS version I downloaded from OnePlus.com?

1) may be forget about root for now as that's probably not the priority at this time. Getting a stable operating system is the priority. And skip TWRP (don't see the point of if being needed at this step either).
2) my best guess is that I've used oxygen updater from the play store to download the full update (not incremental update) that exactly matches the one you have installed now - or search here and find the match to download or used the OnePlus cite to get the file. Then once that is downloaded to your device - go to settings/system/system updates/local update and install and reboot. That's the dirty Flash as in don't wipe/reset your device either before/after the installation. I'm hoping that this method will clean up both the recovery and boot images to stock and hopefully restore stability to your device without the wipe/reset.
Hope that helps and restore the device stability without TWRP nor root.

Hi wugga3, thanks again for your time, unfortunately a stable device is not my problem, I have managed to make a stable boot image by downloading the OOS version from the Oneplus website and flashing the boot image after attempting to root my device unsuccessfully.
My problem right now is that my device isn't rooted and I can't manage to root it using the methods I mentioned above, I currently have an unrooted stable OOS version 11.0.6.1.GM21AA.

NitayMa'ah said:
Hi wugga3, thanks again for your time, unfortunately a stable device is not my problem, I have managed to make a stable boot image by downloading the OOS version from the Oneplus website and flashing the boot image after attempting to root my device unsuccessfully.
My problem right now is that my device isn't rooted and I can't manage to root it using the methods I mentioned above, I currently have an unrooted stable OOS version 11.0.6.1.GM21AA.
Click to expand...
Click to collapse
How about installing just the magisk APK then taking the exctracted boot.img patching it in magisk APK, then disabling all security , take the patched boot.img and flash it in fast boot ( fastboot flash boot boot.img) reboot to system .

hammered58 said:
How about installing just the magisk APK then taking the exctracted boot.img patching it in magisk APK, then disabling all security , take the patched boot.img and flash it in fast boot ( fastboot flash boot boot.img) reboot to system .
Click to expand...
Click to collapse
Ill try it now thank you

NitayMa'ah said:
Hello, I had my OP7P rooted on android 11, but after updating to 11.0.6.1.GM21AA, I just couldn't get root to work.
I downloaded the OxygenOS 11.0.6.1.GM21AA from oneplus.com, extracted the boot.img, downloaded the new (supposedly with Android 11 support) TWRP (twrp-3.6.0_11-0-guacamole.img), booted to the TWRP, and installed root using the magisk APK, when I booted the phone had "Android Intellegnce stopped working" all sort of apps stopped working as well and some also crashed when I tried to open them, I flashed the original boot image and after some research I saw that using Magisk Canary build might help, so I tried with it too and same result.
I tried installing root using Magisk.apk, I tried patching a boot image using Magisk (both versions) but to no avail.
Some notes:
-Using the Canary build actually rooted my phone unlike the normal Magisk, but with problems still.
-When trying to use TWRP's "Flash Current TWRP" option, it overwrite my boot image and when trying to boot to fastboot or system it booted to recovery instead.
I will be glad for any help because having an unrooted device sucks.
Thanks in advance and sorry for any grammar mistakes (English is not my first language)
Click to expand...
Click to collapse
Here's a image file you can flash in fastboot. It's
NitayMa'ah said:
Hello, I had my OP7P rooted on android 11, but after updating to 11.0.6.1.GM21AA, I just couldn't get root to work.
I downloaded the OxygenOS 11.0.6.1.GM21AA from oneplus.com, extracted the boot.img, downloaded the new (supposedly with Android 11 support) TWRP (twrp-3.6.0_11-0-guacamole.img), booted to the TWRP, and installed root using the magisk APK, when I booted the phone had "Android Intellegnce stopped working" all sort of apps stopped working as well and some also crashed when I tried to open them, I flashed the original boot image and after some research I saw that using Magisk Canary build might help, so I tried with it too and same result.
I tried installing root using Magisk.apk, I tried patching a boot image using Magisk (both versions) but to no avail.
Some notes:
-Using the Canary build actually rooted my phone unlike the normal Magisk, but with problems still.
-When trying to use TWRP's "Flash Current TWRP" option, it overwrite my boot image and when trying to boot to fastboot or system it booted to recovery instead.
I will be glad for any help because having an unrooted device sucks.
Thanks in advance and sorry for any grammar mistakes (English is not my first language)
Click to expand...
Click to collapse
Here's an Orangefox prerooted OxygenOS 11 boot.img that works on 11 and 12. Just boot to fastboot, connect to a PC open a command prompt in the same directory and type..
fastboot flash boot boot-v9-root24.img...
Also it's easier to just flash both slots by this commands..
Fastboot flash boot_a boot-v9-root24.img and then fastboot flash boot_b boot-v9-root24.img...
I dual boot with this version of twrp and here's a solid boot img. You can flash it also in recovery or with "partition manager off play store. Check it out.

Fixed!
Thanks so much for the suggestions, which I might didn't fully consider in a rush...
The solution was to root my phone, reboot it all shaky and try to disable all Magisk modules (took me 2 tries because of the crashes and stuff), then flash again the original boot image, rebooting, creating a rooted boot.img using Magisk and flashing it.

Littlemether said:
Here's a image file you can flash in fastboot. It's
Here's an Orangefox prerooted OxygenOS 11 boot.img that works on 11 and 12. Just boot to fastboot, connect to a PC open a command prompt in the same directory and type..
fastboot flash boot boot-v9-root24.img...
Also it's easier to just flash both slots by this commands..
Fastboot flash boot_a boot-v9-root24.img and then fastboot flash boot_b boot-v9-root24.img...
I dual boot with this version of twrp and here's a solid boot img. You can flash it also in recovery or with "partition manager off play store. Check it out.
Click to expand...
Click to collapse
First of all thanks for the help but I ended up fixing it in another way.
Second of all, not really related but do you know if I can use this recovery on OP7Pro A12 custom Rom? (and flash it)