I patched twrp img with magisk and then ran fastboot flash boot "patched file" in fastboot mode. Now, whenever and however I start my system I get only the twrp menu. My device is Lenovo tab 4 8(tb-8504f)
Re-flash tablet's Stock ROM to get rid off of all modifications you applied so far.
re flash the ROM. dont flash the magisk or twrp after it. you will be saved.
you can use twrp via adb boot twrpxx.img So flashing it not needed.
Magisk installation has now become trickier simply flashing via recovery won't work
jwoegerbauer said:
Re-flash tablet's Stock ROM to get rid off of all modifications you applied so far.
Click to expand...
Click to collapse
hello thanks for replying. Could you provide me with the official rom. I've found one but not sure how reliable it is. I also in the twrp menu installed the patched twrp image from sd card to boot. After rebooting I again get the twrp menu but the file is not being show in sdcard anymore.
suraj123 said:
re flash the ROM. dont flash the magisk or twrp after it. you will be saved.
you can use twrp via adb boot twrpxx.img So flashing it not needed.
Magisk installation has now become trickier simply flashing via recovery won't work
Click to expand...
Click to collapse
I also in the twrp menu installed the patched twrp image from sd card to boot. After rebooting I again get the twrp menu but the file is not being show in sdcard anymore. Does this include what you've refused me to do so? And can u pls provide me the official link?
Related
Hi,
was trying to install new ROM & completly wipe out OPO (Including OS). to do so got some error in zip file execution.
So tried to update TWRP (2.8.6 to 3.0.2) and now stuck into OPO boot screen.
Please help!
Thanks in advance!
BR//
Ashok
ashokyadav668 said:
Hi,
was trying to install new ROM & completly wipe out OPO (Including OS). to do so got some error in zip file execution.
So tried to update TWRP (2.8.6 to 3.0.2) and now stuck into OPO boot screen.
Please help!
Thanks in advance!
BR//
Ashok
Click to expand...
Click to collapse
Can you boot into the recovery? Or fastboot? Also before trying to install a new ROM did you backup your previous?
Durso81 said:
Can you boot into the recovery? Or fastboot? Also before trying to install a new ROM did you backup your previous?
Click to expand...
Click to collapse
Can't boot into recovery mode, maybe something went wrong while updating TWRP to 3.0.2 but can boot into fastboot.
also had backup of previous rom but since i can't boot into TWRP now so can't restore it. Earlier on TWRP 2.8.6 i was getting zip file execution error while restoring/installing new ROM.
So for now i have only access to fastboot mode, how to proceed futher?
ashokyadav668 said:
Can't boot into recovery mode, maybe something went wrong while updating TWRP to 3.0.2 but can boot into fastboot.
also had backup of previous rom but since i can't boot into TWRP now so can't restore it. Earlier on TWRP 2.8.6 i was getting zip file execution error while restoring/installing new ROM.
So for now i have only access to fastboot mode, how to proceed futher?
Click to expand...
Click to collapse
You have 2 options you can flash the stock rom and recovery via fastboot here is a guide http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541 (Just skip step 4 don't relock the bootloader specially if you want to install TWRP) Make sure you download the correct file there is a 64gb and a 16gb listed in this guide or you can download the stock file straight from cynogen OS here https://cyngn.com/support
Or you can reinstall TWRP via fastboot by downloading TWRP here https://dl.twrp.me/bacon/ and install your backup if its still there. If its not there you can either download and install any custom rom you want or if you want the stock rom go with option 1 above and then re-install twrp. (Always remeber after installing TWRP don't fully boot into the system or you will loose TWRP, boot straight to recovery once its done flashing TWRP by holding the power button and volume down. )
Durso81 said:
You have 2 options you can flash the stock rom and recovery via fastboot here is a guide http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541 (Just skip step 4 don't relock the bootloader specially if you want to install TWRP) Make sure you download the correct file there is a 64gb and a 16gb listed in this guide or you can download the stock file straight from cynogen OS here https://cyngn.com/support
Or you can reinstall TWRP via fastboot by downloading TWRP here https://dl.twrp.me/bacon/ and install your backup if its still there. If its not there you can either download and install any custom rom you want or if you want the stock rom go with option 1 above and then re-install twrp. (Always remeber after installing TWRP don't fully boot into the system or you will loose TWRP, boot straight to recovery once its done flashing TWRP by holding the power button and volume down. )
Click to expand...
Click to collapse
Thanks!
Do you recommend any video guide for option 2 (TWRP via Fastboot).
ashokyadav668 said:
Thanks!
Do you recommend any video guide for option 2 (TWRP via Fastboot).
Click to expand...
Click to collapse
Never watched a video so can't recommend one particular. But here is a link to all guides and how to http://forum.xda-developers.com/oneplus-one/general/index-oneplus-one-resources-compilation-t2843675
Also there is a one click tool here to make it easy
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
ashokyadav668 said:
Thanks!
Do you recommend any video guide for option 2 (TWRP via Fastboot).
Click to expand...
Click to collapse
Thank you Durso81,
i have successfully installed TWRP & ROM.
Thanks for your time & effort for a beginner.
I installed twrp on my pixel on 7.1.1 it reboots to tarp again I got it to boot to the p.s. by clicking reboot / a on bottom left option but get error codes and can't open a lot of apps. I tried to install a tom and clear device cache and cause fails. Anyone know how I can fix this. I thought I used all the latest files
cgrimm9 said:
I installed twrp on my pixel on 7.1.1 it reboots to tarp again I got it to boot to the p.s. by clicking reboot / a on bottom left option but get error codes and can't open a lot of apps. I tried to install a tom and clear device cache and cause fails. Anyone know how I can fix this. I thought I used all the latest files
Click to expand...
Click to collapse
Did you fastboot boot into TWRP, then flash twrp-pixel-installer-sailfish-3.0.2-0-RC1.zip? Were you stock prior?
Installed img through pc then installed the zip file with twrp. I found a article here stating I need to flash stock ing to get back to normal
cgrimm9 said:
Installed img through pc then installed the zip file with twrp. I found a article here stating I need to flash stock ing to get back to normal
Click to expand...
Click to collapse
Yes, you are not supposed to install twrp, just boot into it. If you install it by mistake, you go back, flash stock boot.img, and do it again.
This is from Dees_Troy's post located here
https://forum.xda-developers.com/pixel/development/twrp-alpha1-pixel-devices-t3500314
Installation:
If you already have TWRP installed: Download the latest zip and install the zip using TWRP.
If you do not already have TWRP installed: Download both the img and the zip. Copy the zip to your device. You will need to have fastboot binaries and the correct drivers installed. Power off your device completely. Hold volume down and turn on the device. Your device should now be in the bootloader. Connect the device to your PC. Open a command window and run the following command from the proper location:
fastboot boot path/to/twrp.img
This will temporarily boot TWRP on your device. If you are using a lockscreen pin/pattern/password and do not get prompted to enter your passord, reboot to the bootloader and try again. Go to install and browse to the zip and install the zip. If you are currently rooted with SuperSU, you will need to reflash the stock boot image before installing TWRP. After installing the stock boot image, follow the instructions for installing TWRP. Once TWRP is installed, grab the very latest SuperSU released on 2015-11-15 or later and install SuperSU.
If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest factory image for your device and reflash the boot image.
@Tulsadiver First off, thanks for the post on this. I installed TWRP to slot A by accident and am finding myself in this same predicament (though I found that I can boot by switching to slot B). I found another post online that mentioned what you commented on, specifically:
Tulsadiver said:
Go to install and browse to the zip and install the zip. If you are currently rooted with SuperSU, you will need to reflash the stock boot image before installing TWRP. After installing the stock boot image, follow the instructions for installing TWRP. Once TWRP is installed, grab the very latest SuperSU released on 2015-11-15 or later and install SuperSU.
Click to expand...
Click to collapse
Having previously downloaded Oreo 8.1 and setup root, I had loaded into TWRP, went to install, selected the TWRP zip, and installed (as per what you had suggested and what I read earlier). This is what led me to the current problem, making me realize that I'm missing something in the description. Now, I likely don't need to flash TWRP (I don't develop and used flashfire to do upgrades) but my last upgrade left me rootless and I felt having it installed would make life a little easier. I was hoping to ask for a clarification on the TWRP install.
Also, you mentioned flashing the stock img. Do you mean from the android OTA downloads? I was getting a corrupt file error when I tried flashing that to slot a...
alienjon said:
@Tulsadiver First off, thanks for the post on this. I installed TWRP to slot A by accident and am finding myself in this same predicament (though I found that I can boot by switching to slot B). I found another post online that mentioned what you commented on, specifically:
Having previously downloaded Oreo 8.1 and setup root, I had loaded into TWRP, went to install, selected the TWRP zip, and installed (as per what you had suggested and what I read earlier). This is what led me to the current problem, making me realize that I'm missing something in the description. Now, I likely don't need to flash TWRP (I don't develop and used flashfire to do upgrades) but my last upgrade left me rootless and I felt having it installed would make life a little easier. I was hoping to ask for a clarification on the TWRP install.
Also, you mentioned flashing the stock img. Do you mean from the android OTA downloads? I was getting a corrupt file error when I tried flashing that to slot a...
Click to expand...
Click to collapse
Things have changed with 8.1. you have to root with magisk. From slot b you cannot fastboot flash boot_a boot.img?
I believe the instructions now are to boot to TWRP, install TWRP pixel installer zip, then flash Magisk zip
Here is where TWRP files are here
https://dl.twrp.me/sailfish/
Tulsadiver said:
From slot b you cannot fastboot flash boot_a boot.img?
Click to expand...
Click to collapse
I hadn't tried yet. I was worried about messing things up further without asking for help online first. I'll give this a shot later. Does boot.img refer to the android image file? (ie: what I'd download from the OTA site?)
alienjon said:
I hadn't tried yet. I was worried about messing things up further without asking for help online first. I'll give this a shot later. Does boot.img refer to the android image file? (ie: what I'd download from the OTA site?)
Click to expand...
Click to collapse
Yes, the zip file that is located where the flash-all.bat is. Unzip it and flash the boot.img.
I bought a Pixel 2 on swappa. It had different bootloader's on slot a and slot b. I couldn't flash updates when on slot a. I thought I was hosed but from slot b I could flash to slot a so now I'm fine. Slot a had a preview bootloader.
Guys i faced a wierd problem . I flashed twrp image and then twrp zip and then magisk ..i rebooted and when i tried to boot in recovery . The recovery was gone but magisk is still . What should i doo nowwww ?
What you do now is you
fastboot boot blu_sparktwrp.img
And then in twrp you flash blu_sparktwrp.zip
Reboot to twrp
Flash magisk 17.2.Zip
Done..rebot.
whizeguy said:
What you do now is you
fastboot boot blu_sparktwrp.img
And then in twrp you flash blu_sparktwrp.zip
Reboot to twrp
Flash magisk 17.2.Zip
Done..rebot.
Click to expand...
Click to collapse
It didnt work ....it goes away after a reboot
sanu26661 said:
It didnt work ....it goes away after a reboot
Click to expand...
Click to collapse
It must work. You're basically flashing TWRP temporarily, so when you are in TWRP for the first time, you have to flash the zip file so that it stays installed. Try that again, maybe you did something wrong, but it has to work, you just need the .img that you flash with your PC, and the .zip that you flash using TWRP when you boot into it the first time.
Kluxe Nobody said:
It must work. You're basically flashing TWRP temporarily, so when you are in TWRP for the first time, you have to flash the zip file so that it stays installed. Try that again, maybe you did something wrong, but it has to work, you just need the .img that you flash with your PC, and the .zip that you flash using TWRP when you boot into it the first time.
Click to expand...
Click to collapse
I booted img first then installed zip but when i reboot to recovery thers only stock recovery present ...did like 10 times results are same
the blu_spark twrp? v2?
If twrp isn't sticking, from my experience is to lock bootloader, flash stock OS and start from scratch.....
Do not flash stock with unlocked bootloader
So, i have used my whole saturday on unlocking the booloader which was the easiest and quickest and then trying to root, but that has failed every time. I first flashed the stock firmware zip 9.0.2 then I go back I dont reboot and flash the twrp and magisk zip and then it wont boot up,
when I try rebooting after flashing the firmware back to the system it sends me to the firmware,
when I try flashing a new firmware and then boot into fastboot then twrp and flash magisk it wont boot up,
and when I do the same only with twrp it wont neither.
I have tried sevel magisk versions, 17.1,17.2,17.3 none of them worked
as for the twrp blu spark or the one from the twrp website, i was always able to boot into twrp but not really to flash it as that would end in a twrp loop
can PLEASE anyone, someone, with a good heart and patience help me ? im really loosing my ****s over this
:fingers-crossed::fingers-crossed:
Try booting into blu_spark twrp
Installing blu_spark twrp
Rebooting to blu_spark twrp
Install magisk 17.3 or 17.1 (I am using 17.3 because it it beta but less stable.)
Faaris Ansari said:
Try booting into blu_spark twrp
Installing blu_spark twrp
Rebooting to blu_spark twrp
Install magisk 17.3 or 17.1 (I am using 17.3 because it it beta but less stable.)
Click to expand...
Click to collapse
can you provide me with the files ? plus
does it make a difference if I take these twrps compared to the one im using from their website ? because I dont see how this can be the fault ?
galaxyss8 said:
can you provide me with the files ? plus
does it make a difference if I take these twrps compared to the one im using from their website ? because I dont see how this can be the fault ?
Click to expand...
Click to collapse
The normal twrp is known to be buggy on the OnePlus 6 since there was encryption and stuff. Here is the blu_spark twrp IMG to boot:
https://forum.xda-developers.com/devdb/project/dl/?id=30485
And here you need to flash the blu_spark twrp: https://forum.xda-developers.com/devdb/project/dl/?id=30484
Flash that then reboot into recovery again
Then flash magisk
If this doesn't work for you I think there is another way.
Faaris Ansari said:
The normal twrp is known to be buggy on the OnePlus 6 since there was encryption and stuff. Here is the blu_spark twrp IMG to boot:
https://forum.xda-developers.com/devdb/project/dl/?id=30485
And here you need to flash the blu_spark twrp: https://forum.xda-developers.com/devdb/project/dl/?id=30484
Flash that then reboot into recovery again
Then flash magisk
If this doesn't work for you I think there is another way.
Click to expand...
Click to collapse
ive done that now and im waiting again in the; the boot loader is unlocked and software integrety.. winodw
im waiting now for some minutes, i flashed the blu spark zip pressed back went to reboot pressed on reboot to recovery and flashed magisk and then reboot to system, thats where i am now
galaxyss8 said:
ive done that now and im waiting again in the; the boot loader is unlocked and software integrety.. winodw
im waiting now for some minutes, i flashed the blu spark zip pressed back went to reboot pressed on reboot to recovery and flashed magisk and then reboot to system, thats where i am now
Click to expand...
Click to collapse
You might be on the wrong slot. DO you even have a system to boot to? Not sure why you even tyred flashing the 9.0.2 ROM. If I was you I would start over. Use the fastboot ROM to get a clean wiped system booting. After that
fastboot boot bluespark twrp v86. Img
Flash bluespark twrp v86. Zip
Reboot revovery
Flash magisk 17.1
yldlj said:
You might be on the wrong slot. DO you even have a system to boot to? Not sure why you even tyred flashing the 9.0.2 ROM. If I was you I would start over. Use the fastboot ROM to get a clean wiped system booting. After that
fastboot boot bluespark twrp v86. Img
Flash bluespark twrp v86. Zip
Reboot revovery
Flash magisk 17.1
Click to expand...
Click to collapse
I flashed the rom because my phone didn't boot up anymore after either flashing TWRP or magisk.
Why should I use the fastboot room, what is the benefit if I use it.
Is the reboot to recovery necessary ? I feel like that part is actually not working properly ?
galaxyss8 said:
I flashed the rom because my phone didn't boot up anymore after either flashing TWRP or magisk.
Why should I use the fastboot room, what is the benefit if I use it.
Is the reboot to recovery necessary ? I feel like that part is actually not working properly ?
Click to expand...
Click to collapse
Yes the reboot to recovery is the most nessesary part of it as it will change slots.
You can try boot to recovery
Flash oos full rom
Flash bluespark twrp. Zip
Reboot recovery
Flash full ROM again
Flash bluespark twrp. Zip again.
Reboot recovery
Flash magisk.
yldlj said:
Yes the reboot to recovery is the most nessesary part of it as it will change slots.
You can try boot to recovery
Flash oos full rom
Flash bluespark twrp. Zip
Reboot recovery
Flash full ROM again
Flash bluespark twrp. Zip again.
Reboot recovery
Flash magisk.
Click to expand...
Click to collapse
Can you explain how to properly boot back into recovery?
Previously I either just went on the back button and flashed the other Zip's or I went back to the reboot overview and pressed recovery there but that also did not seem to work properly I think.
galaxyss8 said:
Can you explain how to properly boot back into recovery?
Previously I either just went on the back button and flashed the other Zip's or I went back to the reboot overview and pressed recovery there but that also did not seem to work properly I think.
Click to expand...
Click to collapse
Just press back button in Recovery/ reboot / choose recovery.
Hello, So i tried to install GPS joystick privacy mode app as a system app first thru titanium backup then ..., i rebooted and now im on boot loop, what do i do?
Any help is appreciated, Thanks
{Mod edited}
Hold Power + vol up + vol down for several seconds should put you in bootloader. Or alteranately, Power+vol down for several seconds should send you to TWRP if you have it installed. From there, I'm thinking you may need to flash the stock ROM again, since you were messing with the system partition, and the phone is not booting now. Either flash stock ROM in TWRP, or use the fastboot stock ROM.
I didn't have twrp installed and i still dont, i patched the boot image with magisk and all i have is root cause i cant seem to keep TWRP installed after 9.5.3, im currently on 10.3.0
cmurder61 said:
I didn't have twrp installed and i still dont, i patched the boot image with magisk and all i have is root cause i cant seem to keep TWRP installed after 9.5.3, im currently on 10.3.0
Click to expand...
Click to collapse
You should be able to fastboot flash stock boot.img from the fastboot ROMs to get the phone running again: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
This will unroot the phone. But you should be able to easily root again by the method you did originally.
What is the problem you are having with installing TWRP? You haven't specifically described how you tried to install. I've had no issues using the TWRP installer zip, after multiple updates.
You need to re flash stock so, boot lastest twrp (fastboot boot twrp.img) and flash lastest stock rom.
And if you need an app as system use magisk module App Systemizer (you also need busybox module and Termux app from playstore) this is the only way (that I known) to convert user apps to system
Sent from my OnePlus7Pro using XDA Labs
redpoint73 said:
You should be able to fastboot flash stock boot.img from the fastboot ROMs to get the phone running again: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
This will unroot the phone. But you should be able to easily root again by the method you did originally.
What is the problem you are having with installing TWRP? You haven't specifically described how you tried to install. I've had no issues using the TWRP installer zip, after multiple updates.
Click to expand...
Click to collapse
Ive tried that it only boots to recivery, i restarted my phone completely with msm its wokring fine now but even after i root on 10.3.0 i still cant get twrp
when i try to install "fastboot flash twrp" it goes thru but it always boot loops to fastboot but when i flash the stock boot image it goes to normal and i can boot into the phone again
RokCruz said:
You need to re flash stock so, boot lastest twrp (fastboot boot twrp.img) and flash lastest stock rom.
And if you need an app as system use magisk module App Systemizer (you also need busybox module and Termux app from playstore) this is the only way (that I known) to convert user apps to system
Sent from my OnePlus7Pro using XDA Labs
Click to expand...
Click to collapse
tried that first part too, cant get into twrp and that makes sense now, i installed busy box but never opened the app to install to system/xbin
here's how ive done my part so far.. ever since i bricked my device last feb 24 , rendering it totally unresponsive.. that not even vol up & power button dont work
1. had to use msm tool just to boot my device. successfully boot my device to 9.5.3
2. device seemed to have a locked bootloader again so i un.lock it again. downloaded a patched 9.5.3 boot.img and flashed it via fastboot
3. successful root confirmed..
4. downloaded twrp 3.3.1-75 unofficial installer.. about 17.5mb. flashed it thru magisk as a module.. then install magisk ( as recommended) then reboot.
5. after a reboot.. and setting it up to my liking,, i reboot to twrp to flash the latest 10.3.1 stable rom..
6. flash twrp installer again.
7. hit reboot then choose Recovery . phone reboot to recovery again
8. flash magisk.zip which i downloaded earlier. then reboot.
done
updated to 10.3.1 with magisk & twrp intact..
btw.. i really dont know how to force my phone to reboot to twrp via PC ADB fastboot command.. easiest way for me to install TWRP is by flashing the TWRP INSTALLER as magisk module
cmurder61 said:
tried that first part too, cant get into twrp and that makes sense now, i installed busy box but never opened the app to install to system/xbin
Click to expand...
Click to collapse
Use busybox magisk module, don't install busybox apps!
Sent from my OnePlus7Pro using XDA Labs
cmurder61 said:
when i try to install "fastboot flash twrp" it goes thru but it always boot loops to fastboot but when i flash the stock boot image it goes to normal and i can boot into the phone again
Click to expand...
Click to collapse
That is because that is NOT the correct way to install TWRP img. You need to fastboot boot TWRP, then once in TWRP flash the TWRP installer zip, as I already mentioned.
This is described in the TWRP dev's thread (and you will see no mention of fastboot flash TWRP).
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322
Also make sure you use a current version of TWRP (latest is unofficial -76) which you can get from the above link.
redpoint73 said:
That is because that is NOT the correct way to install TWRP img. You need to fastboot boot TWRP, then once in TWRP flash the TWRP installer zip, as I already mentioned.
This is described in the TWRP dev's thread (and you will see no mention of fastboot flash TWRP).
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322
Also make sure you use a current version of TWRP (latest is unofficial -76) which you can get from the above link.
Click to expand...
Click to collapse
ive tried that still didn't work but illl try again i guess
santiagoruel13 said:
here's how ive done my part so far.. ever since i bricked my device last feb 24 , rendering it totally unresponsive.. that not even vol up & power button dont work
1. had to use msm tool just to boot my device. successfully boot my device to 9.5.3
2. device seemed to have a locked bootloader again so i un.lock it again. downloaded a patched 9.5.3 boot.img and flashed it via fastboot
3. successful root confirmed..
4. downloaded twrp 3.3.1-75 unofficial installer.. about 17.5mb. flashed it thru magisk as a module.. then install magisk ( as recommended) then reboot.
5. after a reboot.. and setting it up to my liking,, i reboot to twrp to flash the latest 10.3.1 stable rom..
6. flash twrp installer again.
7. hit reboot then choose Recovery . phone reboot to recovery again
8. flash magisk.zip which i downloaded earlier. then reboot.
done
updated to 10.3.1 with magisk & twrp intact..
btw.. i really dont know how to force my phone to reboot to twrp via PC ADB fastboot command.. easiest way for me to install TWRP is by flashing the TWRP INSTALLER as magisk module
Click to expand...
Click to collapse
See the way u did it is diff, i did not root first before installing twrp or install twrp as a magisk mod, what is the mod for magisk? where do i get it
cmurder61 said:
See the way u did it is diff, i did not root first before installing twrp or install twrp as a magisk mod, what is the mod for magisk? where do i get it
Click to expand...
Click to collapse
i just simplified it as magisk mod.. but in TWRP THREAD,, its named by maoronofrio as TWRP UNIFIED UNOFFICIAL INSTALLER
and it can only be installed by installing it as magisk module
here's the link
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3932943