Q&A for [OFFICIAL] Flyme Nexus5 | KK 4.4 | Flyme 3.8.2R | ROM [2014-10-2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [OFFICIAL] Flyme Nexus5 | KK 4.4 | Flyme 3.8.2R | ROM [2014-10-2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
bootloop problem after flash the kernel
Thanks for sharing this amazing Rom
I have a problem, after I flashed ElementalX-N5 1.08.zip the device go into bootloop,
I solve it by re-flash the Rom file, but what is the problem, why my device didn't accept the ElementalX Kernel ?!
and what is the default kernel of this Flyme Rom, is It better than ElementalX Kernel in the Battery Saving ?!
I need to install kernel ElementalX to support The HDR google Camera Feature, bacause the Flyme Rom has a bad camera !
any Support please ?
Curiosity
This is the only android based rom that works on my hardware bricked Nexus 5 (moisture maybe); Sailfish, B2G and Ubuntu Touch works too, but the stock rom and other android based roms screen locks as soon configuration starts (usually touching in "next" after selecting language). I sense that porting the FLymeOS's app settings/configuration could reach any other rom run or something... Any ideas?
Thanks in advance, and sorry for my poor english
M_Nexus5 said:
Thanks for sharing this amazing Rom
I have a problem, after I flashed ElementalX-N5 1.08.zip the device go into bootloop,
I solve it by re-flash the Rom file, but what is the problem, why my device didn't accept the ElementalX Kernel ?!
and what is the default kernel of this Flyme Rom, is It better than ElementalX Kernel in the Battery Saving ?!
I need to install kernel ElementalX to support The HDR google Camera Feature, bacause the Flyme Rom has a bad camera !
any Support please ?
Click to expand...
Click to collapse
You should use ElementalX CM version
Vpabc said:
You should use ElementalX CM version
Click to expand...
Click to collapse
Yes that is what I used, I download it from the this thread so shoud is for CM
And also I tried with the new version 1.12, I download it from ElementalX page, the link was under the CM section ! But same problem, my device go into bootloop !
I have other question please, I changed the dpi of play store to 480 by using the Xposed module, but still I can't get some of Apps when I use the search box of play store !
Shoud change the whole dpi of system & applications or need to change another google app to solve this problem ?!
Thaaanks for helping
This is the bug and meizu say flyme4.0 for nexus 5 will solve this problem
Vpabc said:
This is the bug and meizu say flyme4.0 for nexus 5 will solve this problem
Click to expand...
Click to collapse
thanks, we are waiting for the next version
is there update in the soon
or developers left him ...
Flyme OS not working on my Nexus 5
I flashed the 3.8.2R Flyme OS zip but when it boots, on the language selection screen, it gives me the error "The process com.android.system" has stopped working every time i press NEXT after selecting a language. Restarting didn't help, Clearing Cache/Dalvik didn't help either.
I tried this on the Stock kernel in case that helps someone in helping me!
sp268_simple said:
I flashed the 3.8.2R Flyme OS zip but when it boots, on the language selection screen, it gives me the error "The process com.android.system" has stopped working every time i press NEXT after selecting a language. Restarting didn't help, Clearing Cache/Dalvik didn't help either.
I tried this on the Stock kernel in case that helps someone in helping me!
Click to expand...
Click to collapse
try to do wipe, install flyme, restarts, set the language, then all that flash the gapps
ferozzzz said:
try to do wipe, install flyme, restarts, set the language, then all that flash the gapps
Click to expand...
Click to collapse
Still doesn't work. Once i flash gapps, no matter when i flash them, the phone won't go past the Language selection screen...
sp268_simple said:
Still doesn't work. Once i flash gapps, no matter when i flash them, the phone won't go past the Language selection screen...
Click to expand...
Click to collapse
If you choose the language before flashing gapps no longer asks you choose it again (the language selection screen does not appear)
ferozzzz said:
If you choose the language before flashing gapps no longer asks you choose it again (the language selection screen does not appear)
Click to expand...
Click to collapse
Well that's weird.. Coz i swear it asks me to select the language once again after i flash the gapps.. And that's after already using the phone without gapps and setting everything up beforehand..
When update to flyme4
Problems with immersive mode on fullscreen games
Hi. I flashed Flyme OS a couple of days ago, and I have to say I am loving every single moment of this. Love the interface, love the speed and even the battery life is pretty impressive compared some other ROMS!
Although, I have been experiencing an extremely annoying bug with fullscreen games. I play COC on my phone on a daily basis and when I open the game, the onscreen buttons (Back, Home and Recent) buttons don't disappear like they are supposed to on android 4.4. They stay fixed and visible.
Now, I normally wouldn't mind this, if the full game interface is visible. The problem is that the onscreen buttons are fixed on top of the game, which means that part of the screen is hidden behind the buttons. It is really difficult. I tried a couple of stuff I found on google to fix it.
The only thing I found closest to a fix is to disable the whole onscreen buttons thingy by setting the value of "mu.hw.mainkeys" to "1" in "build.prop" file. Then I installed the "PIE CONTROL" app by "coolace" from the Playstore. It have been working really well for now. But, since it includes installing an external app, which takes up more memory to run I was hoping you guys could look into this and suggest a way to fix this. I like to keep my device clean without installing too much extra applications!
Other than this little problem, I find this as a very top notch ROM. Good work to the developers. Keep it coming
Hope to hear from you guys, and I look forward to newer versions of this ROM, especially one ported with the latest Lollipop release!
Thank You.
---------- Post added at 03:14 PM ---------- Previous post was at 03:06 PM ----------
sp268_simple said:
Well that's weird.. Coz i swear it asks me to select the language once again after i flash the gapps.. And that's after already using the phone without gapps and setting everything up beforehand..
Click to expand...
Click to collapse
I had this problem at the beginning too. But, I downloaded the latest PA Gapps pack and installed it. Worked like a charm after that!
Here is the download link:
http://d-h.st/qOq
This is the PICO package, which means that it will only install the most basic gapps like playstore and play services that you absolutely need to run the system properly! You will have to download the other apps like Gmail and Hangouts from paystore.
Has anyone here succesfully install flyme on lollipop especially with multirom? I always get bootloader error.
I'm using modified TWRP instqlled by multirom. Thanks
Mod brought me here @Adizzzle
JalmiNyondong1933 said:
Has anyone here succesfully install flyme on lollipop especially with multirom? I always get bootloader error.
I'm using modified TWRP instqlled by multirom. Thanks
Mod brought me here @Adizzzle
Click to expand...
Click to collapse
Yes. I installed after lollipop update. Got that error in the first try too!
When flashing the lollipop update, you flashed the hhz12d bootloader. All you have to do is flash the hhz11k bootloader using fastboot. Worked for me after that.
Here is the link where I downloaded hhz11k bootloader:
http://downloadandroidrom.com/file/Nexus5/bootloader/bootloader-hammerhead-hhz11k.zip
:good:
he means cm11. Its work, really, writen now, from flyme, with stock 5.0 and multirom
[EDIT: MY PREVIOUS QUESTION WAS ALREADY ANSWERED] [IGNORE THE ATTACHED IMAGE]
hi my friends! I have 2 questions:
1. I can't make the app "operadora ddd" work with this rom for some reason.
2. Fullscreen mode is definitely broken
Is it normal?
very good
today I used it very good..
I have been trying to install viper4android using magisk but it keeps asking for drivers installation any ideas
V4a is one of the main reasons am rooting
Iloudsan said:
I have been trying to install viper4android using magisk but it keeps asking for drivers installation any ideas
V4a is one of the main reasons am rooting
Click to expand...
Click to collapse
From what I've read in to, V4A isn't yet compatible with the Mate 9. I believe there is bug discussions on github abiut it. I'll update with a link if I find it.
I've been trying to get it working for ages and it isnt working for me. Must be a bug in the driver.
I’ve been searching all over the place and can’t find it again... I found and downloaded a modified version of MTCBackView which has a function of adjusting the parking lines within the app itself. Anyone have a link?
Edit: found it
https://4pda.ru/forum/index.php?showtopic=891403&st=1080#entry78532683
Edit 2: attached to this post!
Remember, you need root privileges to replace the system app!
please
vassandrei said:
I’ve been searching all over the place and can’t find it again... I found and downloaded a modified version of MTCBackView which has a function of adjusting the parking lines within the app itself. Anyone have a link?
Edit: found it
https://4pda.ru/forum/index.php?showtopic=891403&st=1080#entry78532683
Click to expand...
Click to collapse
can you upload and other server, i am spanish and i can not register in russian web PDA!
olivety said:
can you upload and other server, i am spanish and i can not register in russian web PDA!
Click to expand...
Click to collapse
Yep, added it to the first post! Enjoy!
Only thing is the app is still in Russian, but the controls are pretty straight forward
When in reverse, just hold down on the screen for 2 second to bring up the adjustment menu. From there use the touch points to adjust the reverse guide lines, and when everything is adjusted tap the far right button "сохранить" to save your setup.
vassandrei said:
Yep, added it to the first post! Enjoy!
Only thing is the app is still in Russian, but the controls are pretty straight forward
When in reverse, just hold down on the screen for 2 second to bring up the adjustment menu. From there use the touch points to adjust the reverse guide lines, and when everything is adjusted tap the far right button "сохранить" to save your setup.
Click to expand...
Click to collapse
Here is a version translated to English and Norwegian by @zeMadCat https://forum.xda-developers.com/an...head-units-t3847477/post78492026#post78492026
Download link: https://yadi.sk/d/8L5BySlHeHNn9Q
Unfortunately these mods are based on an old version of the mtcbackview.apk which occasionally freezes the reverse camera on my headunit. I have a newer version APK which I have been testing from Eonon and it doesn't freeze, so will have to try and work out how to apply this mod the the newer version.
On px3 eonon with malaysk rom not function
millab said:
Here is a version translated to English and Norwegian by @zeMadCathttps://forum.xda-developers.com/an...head-units-t3847477/post78492026#post78492026
Download link: https://yadi.sk/d/8L5BySlHeHNn9Q
Unfortunately these mods are based on an old version of the mtcbackview.apk which occasionally freezes the reverse camera on my headunit. I have a newer version APK which I have been testing from Eonon and it doesn't freeze, so will have to try and work out how to apply this mod the the newer version.
Click to expand...
Click to collapse
Confirmed working on Eonon PX5 Android 8.0 running Hal9k rom.
Does anyone have this apk for android 9.0? looks like 9.0 is not called 'mtcbackview' anymore..
Does anyone have the latest version unmodified they could share?
On my pumpkin with Malaysk 8.0 the reverse camera freezes too. Has anyone have the new version that Don't freeze?
pabloalcantara said:
On my pumpkin with Malaysk 8.0 the reverse camera freezes too. Has anyone have the new version that Don't freeze?
Click to expand...
Click to collapse
I notice mines freezed on android 8.0 (both the stock and malaysk) if i put it into reverse too quick before letting the unit boot up and start applications 100%
Updated to Android 9.0 and issue seems to be resolved. I think i'm going to give malaysk rom 9.0 a try. I cant seem to find the backview app with guidelines for 9.0..
millab said:
Here is a version translated to English and Norwegian by @zeMadCat https://forum.xda-developers.com/an...head-units-t3847477/post78492026#post78492026
Download link: https://yadi.sk/d/8L5BySlHeHNn9Q
Unfortunately these mods are based on an old version of the mtcbackview.apk which occasionally freezes the reverse camera on my headunit. I have a newer version APK which I have been testing from Eonon and it doesn't freeze, so will have to try and work out how to apply this mod the the newer version.
Click to expand...
Click to collapse
It's possible to share this versions that does not freezes?
Hello,
Where can I find this app? (Link no longer works)
And how is the manual for Android 9.0.
I have original 9.0 Android from Meine Radio mit Root!
Hi. I'm finally successful at installing Pixel Experience on my phone. But I noticed that there's alot of features that's not functioning. I wish I could get an answer here.
1. Dolby Atmos is not working. Already tried downloading the Dolby Atmos Magisk but it's not working. Any solutions for that?
2. The Depth and Ultra Wide Camera is not working. Is there any fix for that?
And lastly.
3. Headphone Jack is not working. How can I fix that?
I'm using the Unofficial Version of Pixel Experience with TWRP alpha 2.
I hope y'all can answer my questions. Thanks in advanced
Hi, I think the best is to answer your questions in the GSI Pixel Experience thread.
For the headphone's problem, go to Parameters/Phh Treble Settings/Misc features, tick "Use alternate way to detect headsets" and reboot the phone with a headset plugged.
ttritium said:
Hi, I think the best is to answer your questions in the GSI Pixel Experience thread.
For the headphone's problem, go to Parameters/Phh Treble Settings/Misc features, tick "Use alternate way to detect headsets" and reboot the phone with a headset plugged.
Click to expand...
Click to collapse
Ok. Gonna try that now. It worked thanks.
*Belsee Android 9 headunit. (PX6 RK3399 10.1" 1024x600 Screen with the MCU MTCE_KSP and BTWQ_BC6)*
Hi Guys, I've been plugging away doing my own researching trying stuff etc. Just wanted to jot down my experience and see if anyone wants to chime in on a few things to help.
I ended up upgrading from my unknown version of Android 9 PQ2A to Android 10 CHS2 IMG -> Download Here
Updating my MCU Firmware from version 3.04 to 3.54 -> Download Here
I tried a number of different images, some not booting, some having a error on the screen MCU doesn't match type stuff. Tried those fixes but they didn't work. Tried the different mod packs but to be honest so many are so ugly.
But OK so I've settled on Android 10, everything works generally OK but I have two issues.
1. My sound used to be alot louder so I presume I had a patched MCU previously. How can I get this patched (file shortcut above)? The android amp mod software doesn't work.
2. My WIFI while it works is generally problematic compared to my Android 9. Is there any patch for Android 10 to fix WIFI related issues?
3. Is there any other Android versions I could update to? That may work with my KSP MCU version? Android 11 or 12 with the same styling as my CHS2.
4. Rooting the headunit seems to be an impossible task, mines not rooted but the mod packs available on here look horrible so I have just left it stock, anyone know of a better way?
But yeah looking for the MCU Sound Patch for my version which isn't available anywhere on the forums and the tools seem to have been removed, and if there's any root or other versions of Android etc.
Files generally sourced from Yandex -> Found here
SoundPatched only works on non-DSP devices, if you want a newer one you need to ask cs-x(RU) to adjustmentit , send him a private message:
[MOD][MCU] cs-x Mod MTCD/E MCU firmware (SoundPatched)
Modified firmware MCU MTCD/MTCE in the part of the presets of the sound processor (Sound Patched) thanks to the esteemed Hal9k_ for advice on creating a topic on the forum for English-speaking users and respected typos1 and Wadzio for their help...
forum.xda-developers.com
You can find the older version here, you can still downgrade the MCU:
[MOD][MCU] MTCB/C/D/E MCU SoundPatched Mod by cs-x - download links only
This is topic where I will put newest files from cs-x, downloaded from his 4pda.ru topic. This is made because cs-x stopped posting here and many people have problems registering or downloading from 4pda. All credits go to cs-x, he made it all...
forum.xda-developers.com
25.95 MB folder on MEGA
154 files
mega.nz
If you want to try a newer one, here's the MCU update without SoundPatched:
dmcu MTCE_KSP_V3.71.rar
drive.google.com
If there are problems with WIFI, you can also try third-party updates, you can find them here, but you already know:
Яндекс
Найдётся всё
disk.yandex.ru
You can try the German M.I.C. he released the latest update in November to fix more problems, I haven't tested it personally, maybe it will help with wifi:
HCT2_RK3399_10.0_ota(2020/08/08) SYCH/M.I.C
Android 10.0 version from SYCH/M.I.C for PX6 Head Units. Day/Night Theme is included! Enjoy :) Download: Fast --> Download build.prop: # begin common build properties # autogenerated by build/make/tools/buildinfo_common.sh...
forum.xda-developers.com
HCT2_PX6_10.0_ota(20221129)M.I.C.rar
drive.google.com
If you need root, the thread is here:
Root for Android 10 PX6 MTCE
I tested this on my Dasaita px6 mtce head unit once I installed Android 10 (thanks Diavol for the tip) I know that there are other ways to do this, but this is how I accomplished it. ****************DO THIS AT YOUR OWN...
forum.xda-developers.com
I personally use Hal9k paid mod 5.2.0 and have no problems, but other users report both bluetooth and wifi problems, mostly with the WQ_RF210 driver, probably a general problem with the latest android 10 updates. They report the same problem on Dasaita. Same problem with bluetooth, also has android 11, so until they release a fix, all I have to do is try older updates. Good luck.