crack/creak noise - Xiaomi Poco X3 NFC Questions & Answers

Has anyone else got a creaking or cracking noise when pressing the back of phone? The whole plastic back is on mine

jonezy8873 said:
Has anyone else got a creaking or cracking noise when pressing the back of phone? The whole plastic back is on mine
Click to expand...
Click to collapse
Nope bro no noise on mine

No, no sound or movement from the back.

Related

Received replacement -screen creaking and moving

Received my replacment Sensation yesterday and noticed it made a slight noise when I touched the bottom right corner area of the screen (near the search button) After using it today for an extended period the creaking became louder and louder and also has moved up so that it will creak if you touch the screen on any portion from the middle of the right hand side on down.. The creaking noise is steadily increasing in amplitude. I have checked to make sure the cover is on correctly and it is . I have pulled the back cover off numerous times and it was of no help. ,has anyone else experienced this issue? I just got off the phone with T Mobile(they could hear the sound as I touched the device,it is that loud) and they are sending out another one.
tenbeau said:
Received my replacment Sensation yesterday and noticed it made a slight noise when I touched the bottom right corner area of the screen (near the search button) After using it today for an extended period the creaking became louder and louder and also has moved up so that it will creak if you touch the screen on any portion from the middle of the right hand side on down.. The creaking noise is steadily increasing in amplitude. I have checked to make sure the cover is on correctly and it is . I have pulled the back cover off numerous times and it was of no help. ,has anyone else experienced this issue? I just got off the phone with T Mobile(they could hear the sound as I touched the device,it is that loud) and they are sending out another one.
Click to expand...
Click to collapse
If you are doing a warranty exchange they will not send the back cover, which is likely the problem. If you have nothing else wrong with your phone I would not risk getting another one with potential other problems. Call HTC and get them to send you a new back cover instead.
I called them and told them my paint was peeling off the back cover and they are sending me a new one for Free. I'ts worth a try and even if it doesn't work you will have a extra back cover.
In the end it should not have this issue, but 3 of mine after a few times opening and general usage gets loose. Others have said putting some tape on the inside of the case solved the creaking for them. There is another thread on that here as well.
Double post???? or you just get all excited??
jmcghee1973 said:
Double post???? or you just get all excited??
Click to expand...
Click to collapse
LOL no I don't know what happened.
bobsbbq said:
If you are doing a warranty exchange they will not send the back cover, which is likely the problem. If you have nothing else wrong with your phone I would not risk getting another one with potential other problems. Call HTC and get them to send you a new back cover instead.
I called them and told them my paint was peeling off the back cover and they are sending me a new one for Free. I'ts worth a try and even if it doesn't work you will have a extra back cover.
In the end it should not have this issue, but 3 of mine after a few times opening and general usage gets loose. Others have said putting some tape on the inside of the case solved the creaking for them. There is another thread on that here as well.
Click to expand...
Click to collapse
Thanks so much for the kind and informative reply. I did a couple of searches on screen creaking etc and nothing came up similar to what I have experienced. would you have a link to that thread or the search verbiage I might use? Would it be "cover loose or screen noises" ? Thanks so much.
tenbeau said:
Thanks so much for the kind and informative reply. I did a couple of searches on screen creaking etc and nothing came up similar to what I have experienced. would you have a link to that thread or the search verbiage I might use? Would it be "cover loose or screen noises" ? Thanks so much.
Click to expand...
Click to collapse
Here is a link to the other thread
http://forum.xda-developers.com/showthread.php?t=1156281
Creaking on mine is pretty bad. I had to put tape all over the cover to stop it. But I'm not going to exchange it.
Sent from my HTC Sensation Z710e

[Q] Muffled Audio / Distorted Audio issue?

Hey peeps,
I've noticed that people complain they cant understand/hear what I'm saying to them when I'm in call and holding the phone in between my shoulder and ear (you know...like using both my hands to do something else while on the phone)
I was curious if anyone else is experiencing this issue because I'm ready to send my phone back to T-Mobile and have them replace mine. Oh and my battery life is terrible. Not sure if that is due to the ViperROM or just from using and charging the phone for the last several months.
Please give me some feedback. I know I'm going to have to reload the stock android rom on my device before sending it in if I do
jerm said:
Hey peeps,
I've noticed that people complain they cant understand/hear what I'm saying to them when I'm in call and holding the phone in between my shoulder and ear (you know...like using both my hands to do something else while on the phone)
I was curious if anyone else is experiencing this issue because I'm ready to send my phone back to T-Mobile and have them replace mine. Oh and my battery life is terrible. Not sure if that is due to the ViperROM or just from using and charging the phone for the last several months.
Please give me some feedback. I know I'm going to have to reload the stock android rom on my device before sending it in if I do
Click to expand...
Click to collapse
I had a similar problem, everyone was telling me that they couldn't hear me or that it sounded like I was on speaker phone. Turns out some gunk had gotten into the mic hole. I cleaned it out with a needle and my problem was fixed. Might want to check that.
ill also have to see if its the cheap $7 plastic casing i have around the phone. gosh this mic hole is tiny and is covered by the casing
the hole is down on the bottom right of the phone right?
Bottom right is correct. You might try drilling a small 1/4" hole for a mic opening in the case.
jerm said:
ill also have to see if its the cheap $7 plastic casing i have around the phone. gosh this mic hole is tiny and is covered by the casing
the hole is down on the bottom right of the phone right?
Click to expand...
Click to collapse
Sent from my HTC One S using xda app-developers app
That is actually a good idea. I'll try it if I isolate the problem to the case. I'm using my phone casually without the case now to see if its the issue.
My hands struggle to grasp the tiny phone now lol, the case is small but the phone itself is slick and smooth metal. Loved this phone when they first set it in my hand at the kiosk

[Q] After replacing the screen, earpiece grill is not working

Hi there,
I replaced my broken screen with a screen+frame which has the grill on the screen. However, after replacement, I can not hear any sound when somebody calls me. I need to use the speaker or the earphones to talk to somebody, pretty annoying. Do you have any idea what I did wrong or missing?
Thanks.
devdala said:
Hi there,
I replaced my broken screen with a screen+frame which has the grill on the screen. However, after replacement, I can not hear any sound when somebody calls me. I need to use the speaker or the earphones to talk to somebody, pretty annoying. Do you have any idea what I did wrong or missing?
Thanks.
Click to expand...
Click to collapse
Did the speaker grill have any coating or covering on the inside? Perhaps you either disconnected or tore a ribbon cable that was connected to the speaker (if there was one)? I had similar issues with my screen replacement, but had issues with no cellular signal. I'm going to have to take mine apart again to investigate. I would suggest the same for you...
bgibson72 said:
Did the speaker grill have any coating or covering on the inside? Perhaps you either disconnected or tore a ribbon cable that was connected to the speaker (if there was one)? I had similar issues with my screen replacement, but had issues with no cellular signal. I'm going to have to take mine apart again to investigate. I would suggest the same for you...
Click to expand...
Click to collapse
Hey, I had the same problem when I first replaced. The solution is easy. I forgot to plug in one of the cables which apparently increases the cellular signal. See the pictures attached.
I can not open the grill, for the sake of not opening the screen from the frame I bought the screen with frame and grill. So this defeats whole purpose.
Anybody has any idea about it? Is there a special connection for earpiece speaker?
Are you sure you have the ear speaker installed ? I don't think you have to open the screen to change the speaker.
In step 19 in the iFixit guide they remove the speaker BEFORE they remove the screen.
By the way where did you ordered the screen + mid frame? How is the rest of the quality ?
Morishno said:
Are you sure you have the ear speaker installed ? I don't think you have to open the screen to change the speaker.
In step 19 in the iFixit guide they remove the speaker BEFORE they remove the screen.
By the way where did you ordered the screen + mid frame? How is the rest of the quality ?
Click to expand...
Click to collapse
Hey Thanks for this. I installed it as well but still not working, interesting. I'm going to reopen try to fit it again.
I bought it from here: aliexpress.com/snapshot/6480736262.html?orderId=65692759745232 - DHL sent me the item in less than one week.
There is also alternative: vifocal.com/lcd-display-digitizer-replacement-with-middle-frame-for-oneplus-one-64gb-16gb.html
Quality is ok, I had ghost swipes before. It's not happening any more. Maybe because of software fixes (I'm on CM12 nightly, Lollipop). Apart from that, the colors are a lil bit washed out. I got used to anyways Sometimes under bright light (outdoors afternoon), greens look so weird. Overall I'm satisfied because I dropped the phone a lot in the past and mid frame was full of scratches. Now I have new mid frame.
Here they said the ear speaker is extremely fragile so i think it's
possible you broke it.
How is the speaker connected anyway ? I diddn't find any connector in the teardown.
Apart from that, the colors are a lil bit washed out. I got used to anyways Sometimes under bright light (outdoors afternoon), greens look so weird.
Click to expand...
Click to collapse
So it's obviously not the original one :crying:
But contact the seller that you didn't get an original one. You can get a refund. And write him a bad critic on aliexpress that it is not original so he can't trick more people.
Morishno said:
Here they said the ear speaker is extremely fragile so i think it's
possible you broke it.
How is the speaker connected anyway ? I diddn't find any connector in the teardown.
So it's obviously not the original one :crying:
But contact the seller that you didn't get an original one. You can get a refund. And write him a bad critic on aliexpress that it is not original so he can't trick more people.
Click to expand...
Click to collapse
it might not be the original one but it saved me from the time without any phones. I gave him a good rating etc. Asking for refund would be unfair in my opinion.
Yes I also saw that xda recommendation, maybe I broke it I don't know. WIll give it a try tonite. Ordered an earpiece speaker just in case from the aliexpress for 6 bucks, but i'm sure it will take at least 1 month to arrive.
devdala said:
it might not be the original one but it saved me from the time without any phones. I gave him a good rating etc. Asking for refund would be unfair in my opinion.
Yes I also saw that xda recommendation, maybe I broke it I don't know. WIll give it a try tonite. Ordered an earpiece speaker just in case from the aliexpress for 6 bucks, but i'm sure it will take at least 1 month to arrive.
Click to expand...
Click to collapse
Thanks everyone, I solved the problem by putting the speaker unit horizontally 180 degree flipped and it started working.
Nice :good:

Audio coming speakers on side but not from front grill; normal?

Hey all. I know the title of this thread is odd, but let me explain. Sadly I dropped my K1 today (never carry a tablet under your arm). Thankfully it was in a case (nothing heavy duty) and didn't fall far, but did land on it's side (left side if you are holding the tablet with the forward facing camera on the top). The screen is fine, but I got worried that something may have happened to the speakers. I downloaded Stereo Test (https://play.google.com/store/apps/details?id=com.jasonfarrell.stereotest&hl=en) to test them and they work, but I noticed something odd. The sound seems to be coming from the speakers on either side of the unit but not the front facing grill. Is this normal?
Yes it is perfectly normal. I have never dropped mine but I have noticed the same thing as well when I am holding the tablet in landscape mode with my hands gripping the sides.
I think the older tablet had holes for the speakers facing towards you when you looked at the tablet but the newer K1 has ports on the ends instead now, so firing side ways?
EDIT ignore me, i can see the holes on the front
albert0pia said:
Yes it is perfectly normal. I have never dropped mine but I have noticed the same thing as well when I am holding the tablet in landscape mode with my hands gripping the sides.
Click to expand...
Click to collapse
Because I'm highly paranoid, can anyone else confirm this? Please?
This is what it looks like under the rubber. Just two holes that the speakers point up to
https://flic.kr/p/GjkeHR
https://flic.kr/p/Fp4z7P
perern said:
This is what it looks like under the rubber. Just two holes that the speakers point up to
Click to expand...
Click to collapse
Can't make out the holes but I do see that there are no speakers underneath the rubber grill. Thanks.

I put the sim tool pin in the upper microphone

hey guys , so i just put the sim toolkit in the wrong hole (upper microphone) and i feel like i click something something like popping i dont know how to explain , i read that the upper mic is for noise cancellation , so did i just damage my mic?? i have upper and lower mic my device is oneplus 6
i need your help guys , thanks
You probably damaged water resistance
HTML:
NateDev said:
You probably damaged water resistance
Click to expand...
Click to collapse
but it will affect the noise cancellation? because its for noise canceling
Sorry but couldn't control... You just put it in the wrong hole... Answering your question, u would have damaged a rubber gasket covering the mic, nothing more than that...
vigneshnallamad said:
Sorry but couldn't control... You just put it in the wrong hole... Answering your question, u would have damaged a rubber gasket covering the mic, nothing more than that...
Click to expand...
Click to collapse
Wrong hole gets you into trouble every time. I've ended up on the couch a few times. A rubber definitely helps cushion the blow, gasket I mean of course.
vigneshnallamad said:
Sorry but couldn't control... You just put it in the wrong hole... Answering your question, u would have damaged a rubber gasket covering the mic, nothing more than that...
Click to expand...
Click to collapse
hmm ok so nothing happens to the noise cancellation??because theres no way to test it , should i return the phone or just live with it ? thanks for your reply
crixley said:
Wrong hole gets you into trouble every time. I've ended up on the couch a few times. A rubber definitely helps cushion the blow, gasket I mean of course.
Click to expand...
Click to collapse
A rubber definitely helps cushion the blow , i didnt understand this sentence , is there a waterproof damage or noise cancellation?? or its just a rubber? thanks brother
mohdz91 said:
A rubber definitely helps cushion the blow , i didnt understand this sentence , is there a waterproof damage or noise cancellation?? or its just a rubber? thanks brother
Click to expand...
Click to collapse
Lol was a pun of sorts, but there is usually something blocking the microphone. A lot of times that actually make the hole curve in a bit to avoid the potential for damage in this situation. On my essential phone the hole was actually right next to the sim slot and there was a similar thread as this about 10 pages long. I wouldn't be overly concerned tbh.
Lol. I thought I was the only one. I did the same thing. It's all good, nothing has happened to my device. I just won't allow water near anymore.
CraigUK87 said:
Lol. I thought I was the only one. I did the same thing. It's all good, nothing has happened to my device. I just won't allow water near anymore.
Click to expand...
Click to collapse
i dont give a f*** for the water , the whole device is not water resistance anyway , but am worried about the (noice cancellation) or the mic function it self because i feel like i click on something or pooped something lol
Got the same when I was using a HTC U11.
And then I sold it.
Thechnically, puting the simm tool on the upper mic hole wont affect anything because it's a straight hole and the there is a 90° angle and the the grill then the speaker which is attached to the motherboard, so i don't think you damaged anything
See the video of jerry rig everything at 2:17
https://www.youtube.com/watch?v=5Z47gXtbXjw&t=250s
Chinaroad said:
Thechnically, puting the simm tool on the upper mic hole wont affect anything because it's a straight hole and the there is a 90° angle and the the grill then the speaker which is attached to the motherboard, so i don't think you damaged anything
See the video of jerry rig everything at 2:17
https://www.youtube.com/watch?v=5Z47gXtbXjw&t=250s
Click to expand...
Click to collapse
as the video , maybe i just damaged the water resistance?
mohdz91 said:
as the video , maybe i just damaged the water resistance?
Click to expand...
Click to collapse
how could you damage the water resistance if the sim tool is straight and the water resistance is in a parallel plan lol
Chinaroad said:
how could you damage the water resistance if the sim tool is straight and the water resistance is in a parallel plan lol
Click to expand...
Click to collapse
lol ok am stupid

Categories

Resources