Database Info

How to install TWRP into the LG P500H from Koodo?

I have a Koodo LG P500H. I am having a very hard time installing TWRP.
Firstly Play store doesn't work. It has this old thing called "Market" that has some apps, but not all. Market eventually gets updated to Playstore, but I can't even find TWRP manager. There was another app in the Playstore that I tried called ROM Manager. It said it installed TWRP for me. I restarted the phone, and nothing happened.
Restarting and Holding power/volume down/home will show a picture that seems to be some sort of recovery mode. But it only run for 1-2 seconds before the phone restarts itself. Nothing happens.
I tried to use ADB. But after rebooting the device it just restarted without ever going into recovery mode. So the flash command just get stuck at "Waiting for Device." Does this phone even have a recovery mode?
This phone doesn't support Odin.
I am used to using TWRP. Without it I cannot flash the phone into new OS.
And every single time I fail, the whole phone seems to have reformatted. So I have to enter in my wifi password and gmail again. All of that typing on a very small keyboard takes a lot of time. I had spent hours on this phone without getting TWRP working.
Please help.

going to twrp web site here
downloading the recovery
reboot to fastboot ( bootloader ) than using terminal whit adb driver :
fastboot flash recover '' recovery.img ''

Gw4nM4n said:
going to twrp web site here
downloading the recovery
reboot to fastboot ( bootloader ) than using terminal whit adb driver :
fastboot flash recover '' recovery.img ''
Click to expand...
Click to collapse
The problem is when I reboot into fastboot (adb reboot bootloader), the phone will go into "phone off battery charging mode". It never actually goes into the bootloader.

Ok I did the following and it seems fastboot and TWRP works now. Be sure to enable USB Debugging on your P500.
1) Fastboot tutorial (I did everything here. I hit "ok" on the LGMDP 1.5 tool as needed. Do not wait till the countdown timer goes to zero.)
http://forum.xda-developers.com/showpost.php?p=15122833&postcount=100)?
FastBoot Tutorial
1. Please download this (or from here) file and unzip it in to any folder.
2. Start LGMDP 1.5 tool with the phone connected (you need to have USB drivers installed) and click on Select Port
3. A separate window should appear like the one below
Just click connect
4. Another window will take shape (LGE Mobile security) with lots of options (links)
Click on the first upper right Browse and select the folder in with you have unzipped the files. You will get some errors that some image, table or headers are missing. Just click OK and in the end everything that should remain selected is Partition Table, APPSBL Image Header and APPSBL Image.
Now just close the window (click on x)
5. Now you are back on the main window and here you'll have to click on Download
6. You are almost done and from now on everything should go on automatically.
NV Backup
Autorestart in Emergency\Download mode and upgrade the files (you selected on step 4)
NV Restore (the last step) Do not disconnect the USB cable until the restore is done
Wait for the phone to restart in normal mode (your current rom).
That should be everything you need to do to get fastboot enabled.
Click to expand...
Click to collapse
2) Install PdaNet+ (This was the only thing I did in this tutorial. It fixed the usb driver and the fastboot can then communicate with my PC.)
http://forum.xda-developers.com/showthread.php?t=1350733
http://pdanet.co/a/
(Note: On top of Partition Table, APPSBL Image Header and APPSBL Image in step 4, I also selected the TWRP image file as my RECOVERY image. Not sure if this make a difference. )
(Note 2: I think you can also get the LG drivers here.)
3) Restart, hold down power + home to boot to the fastboot. Or in ADB type adb reboot bootloader.
4) Open ADB (while phone is still in fastboot mode) and type fastboot flash recovery twrp.img (after downloading the TWRP image, renaming it and moving it to my ADB root folder. I am using TWRP 2.8.0.1 here.)
5) Type fastboot reboot
6) After the phone restarts, type adb reboot recovery. TWRP runs for me. Power+Home+Volume Down (3 button combo) also works now. (Previously this would reset the phone.)

Hey Man, im glad it worked. I could use your help.
I bricked my phone and need the restore file, Do you think you could make a backup from TWRP and upload it?
I would be super grateful.
Thank you.
Here is a zip with CM11, twrp 3.0.2.0 and Gapps for CM11.
Its the best rom I found.
https://www.dropbox.com/s/qt7z1cxq92nhpz5/LgP500CM11V4.4.4.zip?dl=0

Hi. What is your "brick" like? Does your TWRP still run? If yes you can just copy a custom OS into your Microsd card and install it from your Microsd.
You can also use ADB push to move files from your PC to the phone.
http://www.androidauthority.com/android-customization-transfer-files-adb-push-adb-pull-601015/
Sent from my MT2L03 using XDA-Developers mobile app
If you TWRP doesn't run, you need to install that first. Do steps 3 and 4 in the above post to boot into bootloader and install TWRP.
3) Restart, hold down power + home to boot to the fastboot. Or in ADB type adb reboot bootloader.
4) Open ADB (while phone is still in fastboot mode) and type fastboot flash recovery twrp.img (after downloading the TWRP image, renaming it and moving it to my ADB root folder. I am using TWRP 2.8.0.1 here.)

[GUIDE] How to unlock bootloader on Nokia 3

*Unlocking bootloader will remove all your data!*
I'm using Windows 7, and that's the steps i did. (it should be simmilar for other systems too)
Getting code:
Code will look simmilar to this: DB1ED223C5537BA756FB0671E425D650
Method 1 (no root):
Go to
https://passwordsgenerator.net/md5-hash-generator/ copy paste serial number and click generate. Then you should see code in "MD5 Hash of your string". You can also go to simmilar md5 hash generator sites, but this site automatically converts small letters to big letters.
Method 2 (root):
Okay, this is new method that is much easier and you don't need to send IMEI and wait for @the_laser to give you code. Go to terminal emulator, type su and execute it. Then type this and execute it:
redweaver said:
Actually the command is
echo -n NE1GAM4770133666 |md5sum |tr [:lower:] [:upper:]
If you don't use the -n flag, the newline character is also passed and you get a different result
Click to expand...
Click to collapse
Unlocking bootloader:
Download platform-tools which activates adb and fastboot commands (first you need Nokia 3 driver installed if you didn't)
Nokia 3 driver: http://www.devfiles.co/download/3iK0k7Sv/Nokia_3_USB_Drivers.zip
platform-tools Windows: http://www.devfiles.co/download/KtLsN6fX/platform-tools-latest-windows.zip
platform-tools Mac: http://www.devfiles.co/download/OkrfluP0/platform-tools-latest-darwin.zip
platform-tools Linux: http://www.devfiles.co/download/vk5DudZX/platform-tools-latest-linux.zip
Enable usb debugging in Developer options before running adb. To get Developer options, go to settings, about phone and press build number 7 times. Also enable OEM unlock.
Now Connect phone to computer via usb and enable usb file transfer, run cmd as administrator, then type this command which runs adb:
chdir C:/Users/John/Desktop/platform-tools (this is just a example, you need to type your own location of platform-tools)
then type this command to check is your device connected to adb, it will show serial number of your device, if it hangs at waiting device, then you need to reinstall drivers (if you're doing this first time, then it will ask to allow usb debugging on your computer, just tick always allow from this computer and click OK)
adb devices
then type this command to reboot to recovery (you can boot to recovery by holding power on + volume up (only with usb connected) if this command doesn't works)
adb reboot recovery
when booted to recovery, choose reboot to bootloader option with volume sliders (this will boot to fastboot)
when booted to fastboot, it will show text 'FASTBOOT MODE' in down-left corner
now type this command to check is your device connected properly to fastboot.
fastboot devices
if it show characters like 0123456789ABCDEF or simmilar then it is connected properly, if it hangs on waiting device, then you need to reinstall drivers like mentioned above.
Android Nougat (7.0 & 7.1.1):
Now type these commands to unlock bootloader
fastboot.exe -i 0x2e04 oem key (type your key after oem key)
fastboot.exe -i 0x2e04 oem unlock
then press volume up, when asked
Android Oreo (8.0 & 8.1):
First download NE1-0-215H.lk.bin:
https://my.pcloud.com/publink/show?code=XZaLMs7ZclQ2wvKwSb0ofUraMmrsiHh6uk1X
Now type these commands to unlock bootloader
fastboot oem dm-verity <your_unlock_key>
fastboot flash lk NE1-0-215H.lk.bin
fastboot reboot-bootloader
Proceed your unlock procedure.
If you have problem on flashing the lk partition, you can use MTK Smart Phone Flash Tool to flash lk partition manually.
After lk partition flashed, you may encounter "Red State" when booting the phone. Ignore that and boot your phone to Fastboot mode directly with OST LA.
That is it, i tried to explain for you to understand everything i did to unlock bootloader.
Credits:
@the_laser for codes, some additional steps and corrections. Also thanks for new method. @redweaver for new method.
@Hikari_kalyx for Android Oreo method. @bigrammy for NE1-0-215H.lk.bin link.

way to enter recovery without adb -
power off phone
press and hold volume up + power on buttons, insert cable immediately
countdown will start on phone, hold both keys until countdown ends, then IMMEDIATELY release power on key, still holding volume up
you will enter recovery shortly
after installing TWRP it is very important - DO NOT allow /system modification until supersu package installation ! ( or you will require reflashing phone with OST )
another note - can't enter recovery by combination volume-up + power button, if phone not connected to computer
one man reported, that even he successfully flashed TWRP image with "fastboot flash recovery <twrp image>", he still got original recovery.
workaround is to use "fastboot boot <twrp image>" - as we need to have USB cable connected to enter TWRP recovery anyway, not big problem.

the_laser said:
way to enter recovery without adb -
power off phone
press and hold volume up + power on buttons, insert cable immediately
countdown will start on phone, hold both keys until countdown ends, then IMMEDIATELY release power on key, still holding volume up
you will enter recovery shortly
after installing TWRP it is very important - DO NOT allow /system modification until supersu package installation ! ( or you will require reflashing phone with OST )
another note - can't enter recovery by combination volume-up + power button, if phone not connected to computer
one man reported, that even he successfully flashed TWRP image with "fastboot flash recovery <twrp image>", he still got original recovery.
workaround is to use "fastboot boot <twrp image>" - as we need to have USB cable connected to enter TWRP recovery anyway, not big problem.
Click to expand...
Click to collapse
Someone told me that if you flashed twrp, that it automatically removes data encryption. Is that true?
EDIT: i find out that is not true, it asks for some password to decrypt data, but the problem is that idk what is the password

DON'T install xposed! It bootlops.
EDIT: My fault, it actually work but you need to wait more than usual to boot.

That is great guys.
Do we have a working recovery yet?

nafnist said:
That is great guys.
Do we have a working recovery yet?
Click to expand...
Click to collapse
I use this twrp https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
I have stock recovery, but I use fastboot command 'fastboot boot recoveryname.img' when I need TWRP, and that's awesome because I don't lose stock recovery which is useful to flash OTAs and Nokia zips. I flashed SuperSu 2.79 just fine, but expect some crashes like software update, device monitor crash, but actually everything works, software update works just fine.

SkaboXD said:
Someone told me that if you flashed twrp, that it automatically removes data encryption. Is that true?
EDIT: i find out that is not true, it asks for some password to decrypt data, but the problem is that idk what is the password
Click to expand...
Click to collapse
TWRP can't handle Android 7.x default disk encryption, just press "cancel" and we need to use sdcard as storage for backups and packages because of this

Can I return the bootstrapper lock?

Where are you getting the codes from @the_laser?

abetterlie said:
Where are you getting the codes from @the_laser?
Click to expand...
Click to collapse
Yes

shokohiw said:
Yes
Click to expand...
Click to collapse
you mean to get bootloader locked again?
yes you can just instead of oem unlock type oem lock

I mean where are you getting the OEM unlock keys from?
SkaboXD said:
you mean to get bootloader locked again?
yes you can just instead of oem unlock type oem lock
Click to expand...
Click to collapse

abetterlie said:
I mean where are you getting the OEM unlock keys from?
Click to expand...
Click to collapse
idk, ask @the_laser

the bootloader I unlocked how to install root and twrp

shokohiw said:
the bootloader I unlocked how to install root and twrp
Click to expand...
Click to collapse
link for twrp
https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
when downloaded, copy twrp to folder platform-tools and rename it to recovery.img
reboot to fastboot, then type this command:
fastboot flash recovery recovery.img
then reboot, fastboot reboot
if it didn't worked, use this command just to boot to twrp (you need to do this everytime when you are connected to PC)
fastboot boot recovery.img
To install root, first disable system modification on twrp then flash this zip for root.
This is not the latest version of SuperSU, but newest releases have some problems and crashes. (at least for me). This is last version that works for me.
That is it.

Thank you!

Is it possible after unlocking, installing twrp and root, to return the device to factory settings for ota updates? If so, how?

shokohiw said:
Is it possible after unlocking, installing twrp and root, to return the device to factory settings for ota updates? If so, how?
Click to expand...
Click to collapse
on twrp, there is a option wipe, click on it, then you will see option swipe to factory reset. then wait and reboot.
And you can now enable system modification if you want (it is recommended to enable it because some zips fails to flash because this option is disabled)

After installing TWRP and rebooting, does not want to boot Android, weighs in on the initial splash screen what to do
Your device has failed verification and may not work properly

shokohiw said:
After installing TWRP and rebooting, does not want to boot Android, weighs in on the initial splash screen what to do
Your device has failed verification and may not work properly
Click to expand...
Click to collapse
Weird, when it says your device has failed verification?
For me reboot works fine

[HOW-TO] Root BNTV450 Nook 7 (ST16C7BNN) using Magisk.

Root your "Barns & Noble Nook 7" BNTV450 using Magisk's Patch Boot Image File option.
BE CAREFUL!
There are always risks involved when you start messing around with a device.
If something goes wrong, you may end up with a non-working "bricked" device.
This is especially true when you start flashing partitions. (In this case boot.)
Disclaimer
I am not responsible for your non-working "bricked" devices.
I have a few of my own.
Requirements
Barns & Noble Nook 7" BNTV450
A computer with working adb and fastboot
USB cable
WiFi connection
Magisk Manager (Link below)
Stock boot image (Link below)
Tested on:
BNTV450-v1.0.2-20161230 Security patch October 5, 2016
BNTV450-v2.0.4-20170927 Security patch August 5, 2017
BNTV450-v2.0.5-20170110 Security patch November 5, 2017 ota update
macOS 10.13.x
Windows 7 Pro
Steps
Unlock bootloader
Boot Magisk patched boot image
Pull stock boot and recovery images from device
Use Magisk to patch pulled stock image
Test and flash new patched boot image
Notes:
Google updates were needed to get everything working correctly.
PlayServices and WebView
Mac users. As with some other devices, I had to unplug and plugin the USB cable between some of the fastboot commands.
fastboot flash boot patched_boot.img and fastboot boot bntv4-recovery.img
Magisk:
There have been a lot of changes in Magisk since I originally used it to root.
Way too many to mention so, just the basics that apply to this device.
Newer versions of Magisk use the Download directory instead of creating and using the MagiskManager directory.
Some apps search for this directory and used it to determine if the device is rooted.
If you previously used Magisk to root and have a MagiskManager directory, you will want to delete it.
To update Magisk Manager.
Use the update option, it will download and install the newest version.
To update Magisk.
The safest way is to patch the boot image again. Test and flash.
The Direct Install option works but, may lead to a non-desirable outcome.
To uninstall Magisk.
Test boot your original boot image to make sure it works.
Check with Magisk Manager, it should say Magisk not installed.
If so, then flash your stock boot image back using fastboot.
If your stock boot image will not boot, then you are stuck with Magisk patched boot images.
Hardware Keys:
Power and Volume Up = Recovery Mode
Power and Volume Down = Factory Mode
It will show on the bottom Left (Sideways on the top left) Detecting boot mode. With bootloader unlocked it flashes this message very fast so you might not see it.
I still can not produce the same results continuously across mine. The newer ones, that came with v2.0.5 seem to work but, the older ones still it's a 50 % chance if I can get it to work. The bricked ones, do not seem to register the key combo on boot.
Files Needed
Magisk
xda Magisk forum. Link
Magisk and MagiskManager Official github downloads. Link
Boot Images
Magisk patched boot image downloads. Link
Stock recovery and boot image downloads. Link
Credits and Thank You:
@topjohnwu - The creator and brilliant mind behind Magisk.
Everyone who has helped me learn through the years.
Last edited 23.Sep.2018

"QUICK" Guide - BNTV450 Nook 7
Unlock Bootloader
THIS WILL VOID YOUR WARRANTY.
Unlocking the bootloader WILL wipe and Factory Reset your device. Make sure to copy, backup and logout of everything before you begin.
Note: adb and fastboot need to be installed and working.
On device
Go to Settings - About and tap on the build number seven times to enable Developer options.
Go to Settings - Developer options and Enable OEM unlocking and USB debugging
Connect to computer and Allow USB debugging?
On computer
Code:
adb reboot bootloader
Wait for device to boot into fastboot mode then.
Code:
fastboot flashing unlock
On device
Follow the prompts on the device.
Unlock bootloader?
If you unlock the bootloader,you will be able to install custom operating system software on this phone.
A custom OS is not subject to the same testing as the original OS, and can cause your phone and installed applications to stop working properly.
To prevent unauthorized access to your personal data,unlocking the bootloader will also delete all personal data from your phone(a "factory data reset").
Press the Volume UP/Down buttons to select Yes or No.
Yes (Volume UP):Unlocking(may void warranty).
No (Volume Down): Do not unlock bootloader.
After it returns to fastboot mode, use the power button to turn off, unplug it from computer and then turn on.
It will reboot a few times, including an Erasing... screen.
Once device reboots, run through the initial setup.
Note: Sometimes mine would get stuck on the nook .... animation screen. Give it a few minutes (I wait at least 5 minuets) then power off and power back on.
Note: You will now have the annoying boot delay and "Orange State" message.
Orange State
Your device has been unlocked and can't be trusted
Your device will boot in 5 seconds

"QUICK" Guide - BNTV450 Nook 7
Root using Magisk.
MagiskManager 6.0.0 Download
Magisk 17.2 patched v2.0.5 Download
Using Magisk Manager and the provided Magisk patched boot image.
Note: When booting an image from "fastboot", you should not see the initial "orange boot" screen.
Make sure to grant permission if and when prompted on device.
Some of the adb and fastboot commands may require input on the device.
On device
Go to Settings - About and tap on the build number seven times to enable Developer options.
Go to Settings - Developer options and Enable USB debugging
Connect to computer and Allow USB debugging?
On computer
Code:
adb reboot bootloader
Wait for device to boot into fastboot mode then.
Code:
fastboot boot m172_v205_boot.img
Wait for device to boot then.
Reminder. Make sure to grant permission if and when prompted on device.
Code:
adb install -r MagiskManager-v6.0.0.apk
adb shell su -c "dd if=/dev/block/mmcblk0p7 of=/sdcard/bntv4-boot.img"
adb shell su -c "dd if=/dev/block/mmcblk0p8 of=/sdcard/bntv4-recovery.img"
adb pull /sdcard/bntv4-boot.img
adb pull /sdcard/bntv4-recovery.img
Test the images you just made.
Code:
adb reboot bootloader
Wait for device to boot into fastboot mode then.
Code:
fastboot boot bntv4-recovery.img
Wait for device to boot into recovery mode then.
On device
In Stock Recovery use the volume down key to highlight Reboot to bootloader and press the power button.
Wait for device to boot into fastboot mode then.
On computer
Code:
fastboot boot bntv4-boot.img
Wait for device to boot then.
On device:
If you haven't setup WiFi, do so now.
Open MagiskManager
Tap on Install
Select Install
Select Patch Boot Image File
Tap on Internal storage
- Note: If Internal storage is not displayed. Tap on the 3-dot menu (upper right corner) and select Show SD card.
Scroll down and tap on bntv4-boot.img
When Magisk is done patching the image file, select CLOSE
You can close MagiskManager as well.
Copy and test your Magisk patched boot image.
On computer
Code:
adb pull /sdcard/download/patched_boot.img
adb reboot bootloader
Wait for device to boot into fastboot mode then.
Code:
fastboot boot patched_boot.img
On device
Open MagiskManager
Note: You should see that Magisk is installed and active.
To do a quick check.
On Computer
Code:
adb shell
[email protected]:/ $su
[email protected]:/ #exit
[email protected]:/ $exit
If it worked, and you are ready to say goodbye to stock Non-root.
Code:
adb reboot bootloader
fastboot flash boot patched_boot.img
fastboot boot bntv4-recovery.img
Once it's booted into Recovery, unplug the device.
On device
In Stock Recovery use the volume down key to highlight Wipe cache partition and press the power button.
-- Wiping /cache...
Formatting /cache...
Cache wipe complete.
Then with Reboot system now highlighted press the power button.
You are now rooted and running Magisk.
Last edited 23.Sep.2018
Links to my shell logs.
Unlock bootloader. Pastbin
Root. Pastbin

volume button does not react
Hi
unlocking does not work
As mentioned in the other discussion, the volume up button does not seem to react and so the unlocking does not work. Also one user suggested using the reset button after pressing the volume up button for the unlock; that also does not work for me
Do u have any other suggestions to unlock ?;

arrmusic said:
Hi
unlocking does not work
As mentioned in the other discussion, the volume up button does not seem to react and so the unlocking does not work. Also one user suggested using the reset button after pressing the volume up button for the unlock; that also does not work for me
Do u have any other suggestions to unlock ?;
Click to expand...
Click to collapse
I never ran into this problem. So short answer - No.
Can you point me to that other discussion?
What do you get if you run fastboot oem lks
fastboot oem unlock is supported on this device. You could give that command a try and see if there is a difference.
Not sure what you have tried.
I would start with "Factory Reset" in stock recovery. Skip through the initial setup and try again.
Note: Developer option menu has a toggle at the top, make sure it is turned On.
Sent from my BNTV450 using XDA Labs

Volume up button not recognised while fastboot unlock
Hi
Here is the discussion thread that I was referring to where people are stuck with unresponsive volume up button for fastboot unlock
https://forum.xda-developers.com/nook-7/help/nook-rootable-t3510289
I didn't do the factory reset. So maybe I will do that and see if it works.

unlock not working
Hi
Just to further update you on your reply; i did a factory reset and tried to unlock the bootloader but i get to the same problem; the volume button does not respond; so stuck with the message 'press the volume up button to unlock the bootloader'
I did the fastboot oem lks and that commands executes well and it gives me a OK output.
Cheers & New year greetings!

Any update on the unlock issue
Hi
Is there any update on the unlock issue i reported some time back? My last update on this was executing the command => 'I did the fastboot oem lks and that commands executes well and it gives me OK output.'
not sure if my last update was interpreted in the right way; it does nothing when i type fastboot oem lks except saying it is OK (which i suppose is the expected output of fastboot oem lks). So i do not know how to get around the volume keys not being recognised to go further in unlocking
I still can not use the volume keys for the unlock as it does not seem to react. just stuck a bit on this

@arrmusic I guessed it it looked more like this.
Code:
fastboot oem lks
...
(bootloader) lks = 1
OKAY [ 0.000s]
finished. total time: 0.000s
lks = 0 would be unlocked.
I am looking for a way to un-brick these. I think that may be the best way to correct the button problem also.
What os version are you running? (BNTV450-vx.x.x-20xxxxx)
What do you get when you run fastboot flashing get_unlock_ability ?
Tested a few things tonight.
I was NOT able to re-lock the bootloader on either of my rooted devices.(BNTV450-v2.0.4)
Found some more inconsistencies with power and volume key boot combinations. (Among other things.)
"FAILED (remote: not support on security)" apparently is not just for unlocked devices.
Sent from my BNTV450 using XDA Labs

not able to unlock yet
Hi
Many thanks for your reply.
I seem to have the software version v1.0.2;
I tried to find by googling v2.0.4 but i am not able to find that security update anywhere to download; do you have the v2.0.4 file? can i have it somehow?
I ran the commands u had mentioned in your previous reply.
fastboot flashing get_unlock_ability
...
(bootloader) unlock_ability = 16777216
OKAY [ 0.012s]
finished. total time: 0.012s
fastboot oem lks
...
(bootloader) lks = 1
OKAY [ 0.004s]
finished. total time: 0.008s

What is the origin of the boot.img?
What is the origin of the boot.img? I'd rather not just flash something without knowing where its come from.

74178951237895321 said:
What is the origin of the boot.img? I'd rather not just flash something without knowing where its come from.
Click to expand...
Click to collapse
v2.0.3 boot came from a supposed "N" rom for this device and was the first boot image I was able to make bootable. It was still API 23 "M" by the way.
I would have to find and unpack the original file to see what I edited to make it bootable.
All others are "dd" copies from my own device(s).
I am working on updating the OP and the "Quick Guide"
Boot Images
Download Magisk 15.3 patched v2.0.5 (Preferred and current boot image.)
Sent from my ford using XDA Labs

Scatter file for Mediatek MT8163, opening the tablet
Can you post the scatter file for the Mediatek MT8163?
I've been trying to make my own image dumps for the Nook 7, but have run into an issue where the device won't stay in a readable mode for SP Flash Tools long enough while the battery is still connected. So, the solution for most phones is to disconnect the battery and have it powered over USB only so that it won't go past the preloader and into the charging mode.
But I can't get the darned thing open! My phone has a similar style housing and I had to use a suction cup on the glass while prying at the edges to gain access. But for the Nook 7 its just not working.
Edit: This started while trying to soft load TWRP to make the image dumps. When I do
Code:
fastboot boot twrp.img
It tells me that the kernel address lies outside of memory. Its possible to supply an address to load it at with the fastboot command which you are supposed to learn from the scatter file. I found what I thought was a valid MT8163 scatter file but using the address found within did not fix the issue.
I forgot you mentioned that you didn't pull the original image from your device yourself. I've been trying to root this without relying on images from others. Your latest guide to pulling and modifying your own boot.img is a decent enough middle ground for me to use. Thanks.

@74178951237895321
Sent from my Nexus 7 (2013) using XDA Labs

I was able to get a successful root by following the steps in this thread in combination with those mentioned in this one. ipdev, just to satisfy my curiosity, where did you find this "N rom" image?

ipdev said:
So we hit a snag using Magisk 15.4+ to patch a stock boot image on this device.
Click to expand...
Click to collapse
So, I was dumb and went through with updating Magisk without checking this thread first, and now my tablet's stuck in a bootloop that I can't seem to get out of. @ipdev, do you have any ideas on how this happened/how to get out of it? The tablet can't get past the "Orange state your device has been unlocked etc. etc." screen, and I can't get it to boot into recovery either (using Power+Volume Down, is the combination something else on this tablet?). fastboot won't discover it either, probably because it reboots within seconds and never gets to a point where it could be recognized. I'm thinking of letting it bleed out until its battery dies (unfortunately, the battery is soldered and glued in, so I can't just disconnect it), and checking on it in the morning to see if it will be cooperative enough to let me flash the modified Magisk image.

@saagarjha
I have a few in the same condition. As you noticed, the battery is soldered in so the best you can do is disconnect the screen. (Connector to the right of battery.)
One of these days, I was going to try sp flashtools to see if I could recover one of mine. (I'm not sure if it works with these.)
Sent from my Nexus 5 using XDA Labs

I let the tablet run out of battery and then plugged it back in again and it immediately got stuck in the same bootloop, so it looks like it's actually bricked rather than just pretending. I think SP Flash Tools is the way to go at this point; we'd have to find a functioning preloader driver and scatter file to do that, however. It might be possible to simulate disconnecting the battery by shorting the battery's leads, but I'm not sure if this would work (or is even safe to do).

I was having trouble with unlocking the boot loader on my v1 launch version of this Nook. Recently I dropped it and got a new one via the replacement plan - this one was marked 'v2', came with a 2.x firmware that I wasn't able to even get on my launch Nook 7.
Anyway, this one unlocked without any problems. Thought this might be helpful to anybody having trouble unlocking the bootloader. Consider the revision of the Nook you have. Maybe the solution here is flashing the v2 firmwares to the v1? Hard to say.

unable to unlock
So I did "adb reboot bootloader" and the tablet rebooted and says "=> FASTBOOT mode..." on the screen.
I then did "fastboot flashing unlock" on the computer. Nothing happened on the device and my computer says "< waiting for device >". Could anyone please let me know what I did wrong? Thank you very much.

TWRP recovery menu not showing

hi, im new in this android arena and this is my first time using smartphone so please forgive my noobness.
i want to root my phone Xiaomi Redmi 5A and i follow some tutorial on youtube where he told to use Minimal ADB & fastboot, TWRP, lazyflasher noverity and lastly Magisk.
im flashing my phone using this command on ADB:
fastboot devices
fastboot flash recovery twrp.img
fastboot reboot
i guess this is it so im rebooting my phone to get into twrp recovery mode by pressing volume up+power but it showed xiaomi stock recovery instead not twrp recovery.
so what i do wrong that i cannot get into twrp recovery menu?
please help me

Don't type fastboot reboot command after flashing, reboot to recovery manually

StillrunsKK said:
Don't type fastboot reboot command after flashing, reboot to recovery manually
Click to expand...
Click to collapse
i type that command after the first try not working (without fastboot reboot command)
it still gave me the same problem even not typing fastboot reboot command

Is the TWRP flash successful?
Ensure that your mobile drivers are installed properly on your pc and that you've enabled USB debugging.
Now after connecting your device to the computer :
1)open adb
2)type adb devices, if it shows a serial number then proceed
3)adb reboot bootloader
4)fastboot flash recovery xxxx.img
After this, remove the USB and reboot to recovery by Holding the appropriate combination of keys.
If you reboot your device first, and then power off and reboot to recovery, you will still get stock recovery.

StillrunsKK said:
Is the TWRP flash successful?
Ensure that your mobile drivers are installed properly on your pc and that you've enabled USB debugging.
Now after connecting your device to the computer :
1)open adb
2)type adb devices, if it shows a serial number then proceed
3)adb reboot bootloader
4)fastboot flash recovery xxxx.img
After this, remove the USB and reboot to recovery by Holding the appropriate combination of keys.
If you reboot your device first, and then power off and reboot to recovery, you will still get stock recovery.
Click to expand...
Click to collapse
Ensure that your mobile drivers are installed properly
Click to expand...
Click to collapse
i dont know where to find this drivers
i've enable the usb debugging
and while flashing it didn't gave any error

im using adb from this thread https://forum.xda-developers.com/showthread.php?t=2317790
where it didn't show any devices when typing adb devices but it showed my devices when typing fastboot devices

Lenovo TB-X605F twrp?

I was able to get the device rooted with the magisk boot image patch method, but I was seeing if I can get twrp?

turboperson123 said:
I was able to get the device rooted with the magisk boot image patch method, but I was seeing if I can get twrp?
Click to expand...
Click to collapse
Could you link me to the method you used for root please?
Sent from my God Mode 8

Hi
I'm highly interested too. Could you share the method please?
Do you manage to install twrp?
Thanks!

Hello,
How do you do to unlock bootloader.I was able to download and patch with magisk the last ROM but I can't flash it !
Please would you tell us how you do that ?
Thanks

here is the link https://forum.xda-developers.com/ge...agisk-root-t3992477/post80692227#post80692227

Thank you !

go to settings and enable developer options, then go to developer options / enable usb debugging and enable oem unlock
then on pc if you have adb and fastboot installed then type adb reboot bootloader
then once the tablet is in fastboot type fastboot oem unlock-go to unlock the bootloader

TWRP 3.3.1-0 TB-X605F Lenovo Smart Tab M10
i used the twrp port from stock recovery method here https://forum.xda-developers.com/android/general/guide-porting-twrp-source-t3843473
"warning this will wipe data, bootloader needs to be unlocked, computer has adb and fastboot installed"
1. download twrp from here http://www.mediafire.com/file/tn7csi4gzm91w7v/twrp-3.3.1-0-X605F.img/file
2. then on the tablet go to settings / Developer mode / usb debugging
3. connect the tablet to pc with usb cable then on the tablet you will see usb debugging authorizations, click on allow always to make the device debuggable
4. on pc launch command prompt then type "adb reboot bootloader" to reboot into bootloader
5. once in bootloader type "fastboot flash recovery "the directory of the twrp-recovery.img" once flashed then type "fastboot reboot"
6. once tablet rebooted type "adb reboot recovery" on pc to reboot into recovery, warning you will see /data mounting errors to fix this on the tablet go to wipe / format data and type yes to format data, then go back to main screen then go to reboot / recovery to reboot back into recovery.
7. on pc download dm-verity-forceencryption zip file here http://www.mediafire.com/file/ndhe4ewlzlffdur/Disable-dm-verity-forceencryption.zip/file then on the tablet go to advanced / adb sideload then swipe it, then on pc type "adb sideload the directory where you put the zip file" once flashed then go to the main screen then go to reboot / system to reboot system
then it should boot up.

Working fine from my side

Turbo, many Thanks!
It works perfectly ! ?

turboperson123 said:
i used the twrp port from stock recovery method here https://forum.xda-developers.com/android/general/guide-porting-twrp-source-t3843473
"warning this will wipe data, bootloader needs to be unlocked, computer has adb and fastboot installed"
1. download twrp from here http://www.mediafire.com/file/tn7csi4gzm91w7v/twrp-3.3.1-0-X605F.img/file
2. then on the tablet go to settings / Developer mode / usb debugging
3. connect the tablet to pc with usb cable then on the tablet you will see usb debugging authorizations, click on allow always to make the device debuggable
4. on pc launch command prompt then type "adb reboot bootloader" to reboot into bootloader
5. once in bootloader type "fastboot flash recovery "the directory of the twrp-recovery.img" once flashed then type "fastboot reboot"
6. once tablet rebooted type "adb reboot recovery" on pc to reboot into recovery, warning you will see /data mounting errors to fix this on the tablet go to wipe / format data and type yes to format data, then go back to main screen then go to reboot / recovery to reboot back into recovery.
7. on pc download dm-verity-forceencryption zip file here http://www.mediafire.com/file/ndhe4ewlzlffdur/Disable-dm-verity-forceencryption.zip/file then on the tablet go to advanced / adb sideload then swipe it, then on pc type "adb sideload the directory where you put the zip file" once flashed then go to the main screen then go to reboot / system to reboot system
then it should boot up.
Click to expand...
Click to collapse
Good job, @turboperson123 ! @Monpseud0 pointed me over here.
I've got some time this week & I'm going to start on a version that will handle encryption. You can find the device tree and code here. I've included a link to this thread.

I bricked my device. Rebooting the system from TWRP only gets me back into TWRP.
Am afraid I will have to flash a new rom.
Does anyone know where to download a working rom for TB-X065F
Help much appreciated.

stefankkl said:
I bricked my device. Rebooting the system from TWRP only gets me back into TWRP.
Am afraid I will have to flash a new rom.
Does anyone know where to download a working rom for TB-X065F
Help much appreciated.
Click to expand...
Click to collapse
Easiest thing to do is use LMSA. It's available on Lenovo's support page: https://pcsupport.lenovo.com/au/en/...r-list/component?name=Software and Utilities.

Still unable to re-flash stock ROM
Yahoo Mike said:
Easiest thing to do is use LMSA. It's available on Lenovo's support page:
Click to expand...
Click to collapse
I can download the ROM through LMSA, but not flash it.
Trying to do so yields a "complete" message from LMSA after only a few seconds, but then rebooting the device only gets me back into TWRP.
I also tried to flash all system_xx.img from the ROM using fastboot flash system system_xx.img ,
and to flash all vendor_xx.img from the ROM using fastboot flash vendor vendor_xx.img.
Fastboot performs this operation, but then rebooting gets me back into TWRP again.
Trying to reboot the system from TWRP yields the message "no system installed"
Help much appreciated.

stefankkl said:
I can download the ROM through LMSA, but not flash it.
Trying to do so yields a "complete" message from LMSA after only a few seconds, but then rebooting the device only gets me back into TWRP.
I also tried to flash all system_xx.img from the ROM using fastboot flash system system_xx.img ,
and to flash all vendor_xx.img from the ROM using fastboot flash vendor vendor_xx.img.
Fastboot performs this operation, but then rebooting gets me back into TWRP again.
Trying to reboot the system from TWRP yields the message "no system installed"
Help much appreciated.
Click to expand...
Click to collapse
Tough one! Try this. It will wipe your data partition, though.
If it will let you, power down the tablet for about 10mins. Then boot into TWRP. Go to "Wipe" and swipe for Data/Factory Reset. Reboot.
If the M10 still won't boot, in TWRP re-format Data (by typing 'yes' under Wipe->Format Data), and wipe cache and Dalvik Cache. I think dalvik is under Wipe->Advanced. Factory reset again. Reboot.
As an absolute last resort, you might try fixing permissions in TWRP under "Advanced". But I don't think that's going to do much, because you haven't booted the ROM successfully yet.
Hope one of these works for you. Let us know what worked for you. If nothing works, PM me and we'll try some other things.

Lenovo Logo THEN black screen -- DEAD
turboperson123 said:
6. once tablet rebooted type "adb reboot recovery" on pc to reboot into recovery, warning you will see /data mounting errors to fix this on the tablet go to wipe / format data and type yes to format data, then go back to main screen then go to reboot / recovery to reboot back into recovery.
7. on pc download dm-verity-forceencryption zip file here then on the tablet go to advanced / adb sideload then swipe it, then on pc type "adb sideload the directory where you put the zip file" once flashed then go to the main screen then go to reboot / system to reboot system
then it should boot up.
Click to expand...
Click to collapse
I followed the instructions but on the last step of rebooting to system the device restarts, shows the Lenovo logo then it goes to a black / blanks screen. It appears to have shut down. I must hold the power button for several seconds before it wakes up (or restarts?) and does this all over again -- shows the Lenovo logo then black screen.
For the record the device was already rooted with Magisk. I was just trying to do a TWRP backup but found /data mounting errors so tried following steps 6 & 7. At the moment the device refuses to boot up. I am unable to get back into Recovery Mode. The ONLY thing i can do is get into FASTBOOT mode and issue commands from CLI.
The following hardware key combos produce the same results -- tablet turns on to show the Lenovo logo, after a few seconds the screen goes black (the device appears to have turned off):
x Power key
x Power Key + Volume Down
x Power Key + Volume Up
x Power Key + Volume Up + Volume Down
** Release of keys is done once Lenovo logo appears
Any ideas?
UPDATE
I went ahead and performed: fastboot flash boot boot.img << the boot.img was the earlier patched magisk image i used to get the rooted working tablet.
After performing the above the tablet turned on and is now showing the Lenovo logo however it does nothing else --- it remains on the logo forever. I am able to get into TWRP recovery. I went ahead and wiped Dalvik, Cache, and Data. Rebooted to System but still it is stuck on the Lenovo Logo.
The device if fully charged.

crosis99 said:
I followed the instructions but on the last step of rebooting to system the device restarts, shows the Lenovo logo then it goes to a black / blanks screen. It appears to have shut down. I must hold the power button for several seconds before it wakes up (or restarts?) and does this all over again -- shows the Lenovo logo then black screen.
Any ideas?
Click to expand...
Click to collapse
You could try recovering the tablet with LMSA. See this post. You'll lose all your existing data and setup on the tablet, though.
Not sure what went wrong for you. Do you have a TB-X605F with Snapdragon 450 SOC? The existing TWRP is only for the SDA450. I'm working on one for the M10s with SDA429.

Yahoo Mike said:
You could try recovering the tablet with LMSA. See this post. You'll lose all your existing data and setup on the tablet, though.
Not sure what went wrong for you. Do you have a TB-X605F with Snapdragon 450 SOC? The existing TWRP is only for the SDA450. I'm working on one for the M10s with SDA429.
Click to expand...
Click to collapse
Thanks for the response. Yes mine has the Snapdragon 450. I will investigate the LMSA. Been messing around all day but made no progress -- not even QPST is working out.