Related
ZTE NUBIA Z 11 MINI S - GENERAL THREAD
YOUR VARANTY IS VOID AFTER ROOTING - I AM NOT THE DEVELOPER, JUST LEADING A LIST WITH ALL FORUM DOWNLOADS, POSSIBILITIES AND DELEVOPEMENTS OF ASIAN THREADS.
1. TWRP
2. ROOT
3. ROMS Custom Roms & OTA
4. MODS & PATCHES
5. UNBRICK
---------------------------------------------------------------------------
1. TWRP
1. Start your OS and go to -> Settings -> About/ Phone Info -> Tap 10x the BuildNr to enable the Developer Option -> go back once -> Developer option -> enable USB Debugging and OEM Unlock
2. Download TWRP from here:
https://cloud.mail.ru/public/9346/QZnnNkU2f/twrp_3.0.2-0_NX549J_20161125.img OR
https://drive.google.com/file/d/0B2ullM90awCmd3N6MTRXV3NpV1k/view
3. After that shut down your phone. To enter the fastboot press Power + Volume down for some seconds. Then rename your downloaded file to TWRP(.img) and connect your Phone to your computer
(Phone Driver and ADB: http://drivers.softpedia.com/dyn-po...baf0e71302fb01645b90/58aaf34f/48a87/4/1?tsf=0
+ https://developer.android.com/studio/run/win-usb.html )
4. Press Shift and your right mouse for the folder option where you downloaded your TWRP-file. Click "Open Console" and type in the commads in your CMD:
fastboot devices
(to check, if your device is recommended/connected with your computer)
fastboot flash recovery twrp.img
(It's starting to tranfer)
After that its ready to reboot.
5. To open the TWRP use POWER + VOLUME UP for some seconds.
(If its asking to moddify -> YES/ALLOW --- ATTENTION YOU ARE NOT ABLE TO UPDATE VIA OTA AFTER ALLOWING TO MODIFY)
----------------------------------------------------------------------------------------------
2. ROOT
1. Open TWRP -> advanced -> Tools -> Root Device.
2. Go back to home and wipe CACHE and wipe DALVIK CACHE.
3. reboot
Alternative:
1. Open TWRP -> Install SU Zip ( https://cloud.mail.ru/public/9346/QZnnNkU2f/SuperSU_PRO_v2.78SR4_patched_Cobra1111.zip ) -> wipe CACHE and wipe DALVIK CACHE -> reboot
----------------------------------------------------------------------------------------------
3. ROMS AND OTA's
I'm just showing you the links. There's no abra kadabra, just flash the Rom and Gapps (and SU).
CYANOGENMOD UNOFF. cm13 latest build
https://cloud.mail.ru/public/9346/QZnnNkU2f/cm-13.0-20161208-UNOFFICIAL-nx549j.zip
CYANOGENMOD UNOFF. cm14 latest build
https://cloud.mail.ru/public/9346/QZnnNkU2f/cm-14.1-20161208-UNOFFICIAL-nx549j.zip
MIUI 8
https://cloud.mail.ru/public/9346/QZnnNkU2f/miui8_nx549j_7.1.25_yayanan.zip
GIZ ROM
https://cloud.mail.ru/public/9346/QZnnNkU2f/nubia Z11 mini S GizROM 1.0.zip
Latest Official OTA Version 1.30 Slim & FULL
Slim: https://cloud.mail.ru/public/9346/QZnnNkU2f/NX549_v1.30_Lite_060117.zip
Full: https://cloud.mail.ru/public/9346/QZnnNkU2f/NX549J(Z11MINIS)-V1.30-Dk0105.zip
GAPPS ARM64:
http://opengapps.org
-----------------------------------------------------------------------------
5. UNBRICK:
I found a Kit for the Nubia but so far i had no experience with this tool. I hope someone is going to proofe us. :good: Maybe it's the same way like the Oneplus 3 with the unsigned driver, shown as a Qualcomm device at the device Manager (windows). Someone's got a idea?
https://drive.google.com/open?id=0B7eRbJxpNNKpOG1tMHlNeDlMLWc
Hi,
someone have find a working app for dpi change?
i've tryed some, bunt always have a UI crash and have to reset the vm density via adb( adb shell wm density reset).
i'm on stock eu ROM 1.09
Thanks in advice
ZTE Zubia 11 mini 'Notifications'
Hi folks,
My first visit here, hope someone can help. I received my Nubia 11 last week and have been setting it up. I noticed I only receive my whatsapp messages when I am actually using the phone and the app is running in the background, leave the phone for a few minutes and if someone has whatsapped me in that time I will not receive the notification unless I take the phone out of 'sleep' and check whatsapp at which point any messages will come in. I thought it was just whatsapp but then realized its any messaging emails (gmail and outlook) app. I have scoured the settings, permissions, etc but cant seem to find anything that will stop my apps going to sleep/stopping when the phone goes to sleep. Receiving any emails/messages does not wake the phone up to notify me. please help thanks
dazcrawford said:
Hi folks,
My first visit here, hope someone can help. I received my Nubia 11 last week and have been setting it up. I noticed I only receive my whatsapp messages when I am actually using the phone and the app is running in the background, leave the phone for a few minutes and if someone has whatsapped me in that time I will not receive the notification unless I take the phone out of 'sleep' and check whatsapp at which point any messages will come in. I thought it was just whatsapp but then realized its any messaging emails (gmail and outlook) app. I have scoured the settings, permissions, etc but cant seem to find anything that will stop my apps going to sleep/stopping when the phone goes to sleep. Receiving any emails/messages does not wake the phone up to notify me. please help thanks
Click to expand...
Click to collapse
if you have the EU version of ROM you have to open task manager(long press on back softkey and swipe down on whatsapp and other app that you want to "lock" in memory. your notification will work even in sleep.
Hi
Thanks, I tried the long press, nothing happened, I guess it's not the EU version. Is there another way to open the task manager? Or lock the app? Thanks
dazcrawford said:
Hi
Thanks, I tried the long press, nothing happened, I guess it's not the EU version. Is there another way to open the task manager? Or lock the app? Thanks
Click to expand...
Click to collapse
the task manager is the recent activity screeen.it looks like this:
Ahhh... For me it was the middle button I long press. I think I've done it. I swiped down on the app and a padlock appeared I guess that means it's locked. Does that mean it's locked for good? How is it disabled? Thanks again.
---------- Post added at 01:45 AM ---------- Previous post was at 01:43 AM ----------
hhh... For me it was the middle button I long press. I think I've done it. I swiped down on the app and a padlock appeared I guess that means it's locked. Does that mean it's locked for good? How is it disabled? Thanks again.
anyone has root this phone?
ResurrectionRemix 5.7.4 Android 6.0 for nubia n11 mini s : https://translate.googleusercontent...1.html&usg=ALkJrhiGM-vsQzTxuu4WfAkaug-DVcEMmQ
okaiuz said:
if you have the EU version of ROM you have to open task manager(long press on back softkey and swipe down on whatsapp and other app that you want to "lock" in memory. your notification will work even in sleep.
Click to expand...
Click to collapse
Hi okaiuz,
thanks for the tip, it help a lot! I had the same issue, as dazcrawford ,now I am receiving all notification but the gmail. Are you guys experiencing the same thing? I am using the gmail app, I've tried the default z11 mail app too, but it's the same, I need to go within the app and refresh in order to get the messages. Thanks
bionic77 said:
Hi okaiuz,
thanks for the tip, it help a lot! I had the same issue, as dazcrawford ,now I am receiving all notification but the gmail. Are you guys experiencing the same thing? I am using the gmail app, I've tried the default z11 mail app too, but it's the same, I need to go within the app and refresh in order to get the messages. Thanks
Click to expand...
Click to collapse
hi, now i'm been testing the ressurrection remix rom, btw when i used EU rom i've not noticed issue with gmail notification (with padlock).
try to remove padlock from gmail app and test notification.
bionic77 said:
Hi okaiuz,
thanks for the tip, it help a lot! I had the same issue, as dazcrawford ,now I am receiving all notification but the gmail. Are you guys experiencing the same thing? I am using the gmail app, I've tried the default z11 mail app too, but it's the same, I need to go within the app and refresh in order to get the messages. Thanks
Click to expand...
Click to collapse
duplicated post, sorry
okaiuz said:
hi, now i'm been testing the ressurrection remix rom, btw when i used EU rom i've not noticed issue with gmail notification (with padlock).
try to remove padlock from gmail app and test notification.
Click to expand...
Click to collapse
I've tried in order
Lokscreen on/off
Notificationbar on/off
Headsup on/off
it didn't help! When you saying `test notification` do you mean there is a feature?
Is it the same service responsible for hanghouts and gmail notifications?Thanks
So This is it?? There Are No more development for This Phone, other than what is listen in OP??
OTG??
Good day gentlemen, can anyone confirm if nx549j supports otg fully? I just got the phone last month and 2 days ago I got that type c to usb, but when I connect my Xbox one controller the phone freezes for ±5sec then restarts. using my flash drives, ext. HDDs... is no use either, the phone says I must format them first. However in twrp I am able to access the single partitioned drives. Can anyone shed some light on this?
help please!
okaiuz said:
if you have the EU version of ROM you have to open task manager(long press on back softkey and swipe down on whatsapp and other app that you want to "lock" in memory. your notification will work even in sleep.
Click to expand...
Click to collapse
i have the same problem, when i close wassap or i have the phone blocked no notifications will come thru.
i tried to lock the apps but it does not seem to be working for me
I got the Nubia Z11 Mini S dont know wish rom tho
Hi all,
so after wandering around posts and going through articles like ( i am not allowed to put the link, but you can google it`Turn notifications on or off` there is a quick guide ) , nothing changed! However, the last thing i've tried it worked, and that was to change the app, so i've uninstalled the gmail app and installed another app which support google emails `myMail`, it has similar interface, so i am not missing anything from gmail and it's working perfectly.
Best
thanks bro i am also facing same problem. but now it is solved and helps me a lot. so many users do not know about this
https://cloud.mail.ru/public/9346/QZnnNkU2f { different language , chrome will translate }
This link has all the files (Main roms in the CM folder ) , including many many roms
but there is no discussion site .... so dont know about stable roms ... working fingerprints .... etc
Guys , would you you try these roms and tell me which roms are working and which are buggy.
my nubia is still on its way
https://github.com/ztemt/NX549J_M_kernel
kernel sources are out!!
Yet again, all thanks go to @jrkruse for this one. I have modified his zip to work on the Verizon S7 flat. The ROM is silky smooth since it uses the factory kernel. The instructions have been tweaked to work for the Flat. I can confirm that SafetyNet passes using this method.
A MASSIVE thanks goes to @hunteditor for this. I haven't been around XDA much these past few weeks and haven't made a new thread for the U-ROM. It has been long overdue. He took on the annoyance of modifying the instructions and download links to work.
hunteditor said:
People ask if they can root this Rom. The answer is yes, but why would you want to? You get all the benefits of rooting and still have official status. Plus, you get the outstanding battery life of a non-rooted S7.
Click to expand...
Click to collapse
jrkruse said:
An Explanation of what this is. I have found a way to manipulate system files on a stock rom and not loose system official status. This Allows Samsung Pay and all safetynet checking apps to function. This Rom is not rooted just modified.
Features
Features:
Aroma Installer
Choose From Total Stock Rom
Choose From Debloted Rom 70 Apps Removed
Choose From BS Free Over 120 Apps Removed
Choose PlayStore Rom Over 120 Apps Removed Plus All Samsung Apps Replaced With Google Apps
Wifi Calling
Video Calling
Volte
Hd Voice
Visual Voice Mail
Working Hotspot For Unlimited Data Customers
Samsung Pay Working
Samsung Cloud Storage
Native Call Recording With Automatic Call Recording Feature
Multi Users
Device Maintenance Enabled
International Settings Layout
Build.prop Tweeks
Ad Host Blocking
Outdoor Mode
KeyLight Duration Settings
LockScreen Torchlight
Phone Testing Menu For System Selection Control
Stock Kernel So No Lag
MODS-(NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
Click to expand...
Click to collapse
LATEST ROM UPDATE IS POSTED HERE
Downloads:
G930UUEU4BQD2_G930UOYM4BQD2_VZW.zip
UFirm_Multi_Carrier_Hybrid_NoNaMe_PlayStore_BS_Fre e_V14_VZWS7FLAT.zip
Latest Odin
Latest FlashFire APK
Nougat_S7_Root_2_81_All_Carriers_V2.zip – thanks jrkruse
S7 Nougat root kernel
Install Instructions From Any Build:
Warning: This will wipe your device. Some of these instructions are redundant, but they will ensure that everything goes as planned. If you don’t follow them to the T, don’t complain.
1) Unzip G930UUEU4BQD2_G930UOYM4BQD2_VZW.zip. Boot the phone into download mode (volume down, home, and power) then flash all four files (BL, AP, CP, and HOME_CSC) with ODIN. The phone will reboot into recovery and throw an error. Reboot into download mode and reflash HOME_CSC again. – Thanks @thefirst__noel
2) Don’t bother logging into any accounts, as the phone will get wiped again. Copy the FlashFire.apk, AP_G930UUEU4BQD2_CL10860000_QB13198947_REV02_user_ low_ship_MULTI_CERT_meta.tar.md5, and UFirm_Multi_Carrier_Hybrid_NoNaMe_PlayStore_BS_Free_V14_VZWS7FLAT.zip to Internal Storage. – Thanks @appye
3) Make sure secure boot is turned off!!! Shut off the phone and boot into download mode (volume down, home, and power). Flash the S7 Nougat root kernel in the AP slot in Odin.
4) When the phone reboots, unlock developer options and enable USB debugging. Unzip the S7_SU_2_79_Root_Unroot_WO_Tweaks.zip and run root.bat from your PC. May need to right-click and run as administrator.
5) Now install FlashFire. In FlashFire, select add Flash Firmware Package and choose AP_G930UUEU4BQD2_CL10860000_QB13198947_REV02_user_ low_ship_MULTI_CERT_meta.tar.md5 and make sure all partitions are checked.
Then add Flash Zip or OTA and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PlayStore_BS_Fre e_V14_VZWS7FLAT.zip and tap mount system when FlashFire asks.
VERY IMPORTANT NOTE: MAKE SURE TO UNCHECK INJECT ROOT AFTER ADDING THE ZIP! – Thanks @dclutter1
Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last.
6) The phone will restart and FlashFire will flash the firmware first, then the Aroma Installer will start.
7) In Aroma, select wipe ALL data (DO NOT KEEP SU) – See notes below.
8) The phone will say custom status on first boot, but it goes away after setup and reboot.
The phone may take up to 20 minutes to boot the first time, so be patient.
If you reflash the ROM, you must flash the AP file in FlashFire at the same time.
Notes:
* Do not use Package Disabler Pro if you choose NoNaMe mods in Aroma.
* If you are installing the S8 apps, you may run into force closes. Your best bet is to pull down on the notification panel, click the settings button, and go into applications and clear data for everything that is force closing. If you keep data, you may run into issues with Advanced Calling and other features. Keep data at your own risk. If you don’t wipe data, then please don’t post issues in the thread.
* I was able to keep my settings and data by choosing keep data in Aroma and still passed SafetyNet. I can’t guarantee that this will work for everyone, but you can try if you want. This probably will not work if you are coming from MM. If you decide to take this route and have issues, do a full wipe and reinstall before posting any problems.
* If you get constant application errors saying "IMS service has stopped" and "com.sec.epdg has stopped", boot into recovery using the Power+VolUp+Home combination. You will likely get a "No command" error screen. Let it on that screen (30-60 seconds) and it will eventually go into the recovery menu. Wipe data and cache in recovery. – thanks paul.miner
jrkruse said:
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
Click to expand...
Click to collapse
Kernel source
RomControl Source
jrkruse said:
Install And Uninstall Ad Blocking Via ADB Without Rooting
ADB_AdBlocking_Host_Stock_Host.zip
AP_G930UUEU4BQD2_Boot_Recovery_Image.tar.md5
Nougat_S7_Flat_EngBoot.tar.md5
Download these three
Unzip ADB_AdBlocking_Host_Stock_Host.zip
Reboot phone to download mode
In Odin Flash Nougat_S7_Flat_EngBoot.tar.md5 In AP Slot
When phone reboots and reconnects run adblocking.bat for ad blocking or run no_adblocking.bat to remove ad blocking
Phone will reboot back to download mode
In odin flash AP_G930UUEU4BQD2_Boot_Recovery_Image.tar.md5 In AP Slot
Your back to normal
Click to expand...
Click to collapse
***This post has been modified to include the Flat files only.***
Thanks @DJ XtAzY for the Boot_Recovery image.
Does this ROM come with Google Pixel Dialer, Google Camera etc Google stuff in Aroma to choose from ?
I didn't install those options, but I believe they are there, along with some S8 app options as well. I've been running this for a week. It's silky smooth with great battery life. Every time I pick up my phone now I can't help thinking this is how our phones should be. I'm loving this ROM.
Here's the boot recovery file I created that should be added to the first post:
AP_G930UUEU4BQD2_Boot_Recovery_Image.tar.md5
Those that want to remove or update ad blocking host file will need to follow jrkruse post, with one modification:
https://forum.xda-developers.com/showpost.php?p=71331817&postcount=2
jrkruse said:
Install And Uninstall Ad Blocking Via ADB Without Rooting
ADB_AdBlocking_Host_Stock_Host.zip
Unzip ADB_AdBlocking_Host_Stock_Host.zip
Reboot phone to download mode
In Odin Flash Nougat_S7_Edge_EngBoot.tar.md5 In AP Slot
When phone reboots and reconnects run adblocking.bat for ad blocking or run no_adblocking.bat to remove ad blocking
Phone will reboot back to download mode
In odin flash AP_G930UUEU4BQD2_Boot_Recovery_Image.tar.md5 in AP Slot
Your back to normal
Click to expand...
Click to collapse
I also modified the updater_script so that the BS Free section of the script will remove more of Google Apps, such as Photos, Hangout, but I kept the Camera plugins and the Gallery's photo editor and video playback, etc. I also sorted that section of the script by alphabetical, it was a pain to see what the script removes and keep when everything is out of order when going through the list. If anyone's interested of that updater_script, let me know.
DJ XtAzY said:
Here's the boot recovery file I created that should be added on the first post:
AP_G930UUEU4BQD2_Boot_Recovery_Image.tar.md5
Those that want to remove or update ad blocking host file will need to follow this modified post:
https://forum.xda-developers.com/showpost.php?p=71331817&postcount=2
I also modified the updater_script so that the BS Free section of the script will remove more of Google Apps, such as Photos, Hangout, but I kept the Camera plugins and the Gallery's photo editor and video playback, etc. I also sorted that section of the script by alphabetical, it was a pain to see what the script removes and keep when everything is out of order when going through the list. If anyone's interested of that updater_script, let me know.
Click to expand...
Click to collapse
I added this to the second post. Thanks!
As for the updater_script, I planned to redo it to fix the gallery and video issues on the next version. I didn't want to upload an update with these fixes, then release one right after when the latest ROM is available with the new firmware, because that usually ends up being the case lol. I'd definitely be interested in looking at your script.
I feel like I'm going crazy here, any help would be appreciated. I downloaded everything and flashed all four files (BL, AP, CP, and HOME_CSC) with ODIN. The phone reboots into recovery and throws an error. I reboot into download mode and reflash HOME_CSC again. Then, it just gets stuck on the SAMSUNG screen. I've tried reflashing multiple times, and even let the phone sit for over an hour in case it was just taking a long time to boot. But I can't ever get it past the SAMSUNG screen. Any ideas?
@CVertigo1
I was able to install this ROM.
I noticed a very weird thing. In the attached screenshot, there is a small white tab at top of the screen in scroll area.
Why does it exist ? Can we hide it ?
njKeever said:
I feel like I'm going crazy here, any help would be appreciated. I downloaded everything and flashed all four files (BL, AP, CP, and HOME_CSC) with ODIN. The phone reboots into recovery and throws an error. I reboot into download mode and reflash HOME_CSC again. Then, it just gets stuck on the SAMSUNG screen. I've tried reflashing multiple times, and even let the phone sit for over an hour in case it was just taking a long time to boot. But I can't ever get it past the SAMSUNG screen. Any ideas?
Click to expand...
Click to collapse
Reboot into recovery and wipe data.
electrosam said:
@CVertigo1
I was able to install this ROM.
I noticed a very weird thing. In the attached screenshot, there is a small white tab at top of the screen in scroll area.
Why does it exist ? Can we hide it ?
Click to expand...
Click to collapse
It's called the battery bar. Disable it in the ROM control app.
CVertigo1 said:
Reboot into recovery and wipe data.
It's called the battery bar. Disable it in the ROM control app.
Click to expand...
Click to collapse
Thanks a lot. I was able to hide it.
Another weird thing is, in the ROM control app, the button size is enlarged. Not sure why (attached).
I was using other ROM of yours earlier and in it the size was correct. Any thoughts?
Also, a word of caution during installation-
When I flashed everything from ODIN first and booted, the phone downloaded an update(OTA)
I accidentally said Update. It went ahead and installed it.
Booted back fine, was able to root, flashfire, aroma. After aroma however, it got stuck in boot animation. Rebooted it, got stuck and would not go ahead.
Needed to factory reset from recovery and start over.
Some of the cursors are a little awkward with the modded systemUI. You'll notice it everywhere, especially Google.
CVertigo1 said:
Reboot into recovery and wipe data..
Click to expand...
Click to collapse
That did the trick, thank you so much!
CVertigo1 said:
Some of the cursors are a little awkward with the modded systemUI. You'll notice it everywhere, especially Google.
Click to expand...
Click to collapse
Thanks.
One more doubt-
How can we control settings of open source ad blocking ?
I think it is blocking 'Here Maps' App and I'd like to exclude this from blocking.
Thanks.
electrosam said:
@CVertigo1
I was able to install this ROM.
I noticed a very weird thing. In the attached screenshot, there is a small white tab at top of the screen in scroll area.
Why does it exist ? Can we hide it ?
Click to expand...
Click to collapse
thats the battery bar you can remove it in the rom control app
CVertigo1 said:
Some of the cursors are a little awkward with the modded systemUI. You'll notice it everywhere, especially Google.
Click to expand...
Click to collapse
Is there a plan to fix this ?
Is this more visible if we choose Google Play ROM version as opposed to debloat/verizon rom ?
I was using Verizon_TMO_Hybrid_Nougat_Rom and in this I think this cursor/gui awkwardness did not exist.
Thanks
electrosam said:
Thanks.
One more doubt-
How can we control settings of open source ad blocking ?
I think it is blocking 'Here Maps' App and I'd like to exclude this from blocking.
Click to expand...
Click to collapse
I use Adguard, so I don't use the ad blocking in the ROM. I don't know how to help on that. Did you see post #2 about ad blocking? If I remember correctly, you can edit the file and use adb to push it, but I'm not certain.
electrosam said:
Is there a plan to fix this ?
Is this more visible if we choose Google Play ROM version as opposed to debloat/verizon rom ?
Click to expand...
Click to collapse
That is really up to jrkruse if he fixes it in a later update. Switching ROM versions won't fix it. If it's a huge bother to you, then re-flash the ROM and don't choose the modded systemUI.
I am currently running Stang5litre Edition 5.0 s7 v3 MM ROM on an AT&T S7 Flat and I believe the ROM is based on the S7 Edge . I am trying to flash this ROM using the OP instructions and keep getting this error in Odin on Step 1. The phone never reboots, it just stays in recovery. Any suggestions?
ezwalker63 said:
I am currently running Stang5litre Edition 5.0 s7 v3 MM ROM on an AT&T S7 Flat and I believe the ROM is based on the S7 Edge . I am trying to flash this ROM using the OP instructions and keep getting this error in Odin on Step 1. The phone never reboots, it just stays in recovery. Any suggestions?
Click to expand...
Click to collapse
Its cause this ROM is nougat based and for a strange reason you can't flash nougat roms directly on top of MM ones. The usual fix is to flash the stock firmware for your phone, try to get the OTA update for nougat, then follow the steps. Also just giving a fair warning you can't downgrade back down to MM after the nougat update so you wont be able to go back to Stang5litre until he updates that to nougat.
---------- Post added at 02:00 PM ---------- Previous post was at 01:45 PM ----------
@CVertigo1
Hey I have a bit of a bug report. Was messing around with the settings in NNRomControl and finally got things the way I like it. I went to go restart the phone and when it booted back up System UI either Stopped or Crashed and didn't restart itself. Did a little testing and found that it was the System UI Tuner Mod. After enabling any of the settings and restarting the phone System UI would immediately crash on startup.
Deleted
Hey @CVertigo1 im using the current urom. And dome of my pictures arent loading. Anyidea? Refer to my picture in the other thread
I was installed some s8 random apps (downloaded from appmirror) by the following tricks from this forum.
Quote:
Originally Posted by Vyshakh Babu
I'm done it on my non-rooted S7 edge
These are the steps I done
1. Add a shortcut of the apk to the home screen from the my files app
2.Power off the phone.
3. Cleared the cache partition.
4. Restarted the phone.
5. Quickly installed the Apk by accessing the shortcut from home screen.
(Now it's installed )
6. But the launcher keeps force stopping.
So I cleared touchwiz home's data and cache from app manager.
7. Now it's working fine.
I also installed Bixby app through the same process.
Hope this solution works for all those who face the conflicting signature problem.
Click to expand...
Click to collapse
For some reason i was reset(hard) my phone (by wiping data + cash partition). After successfully reset when device is turned on i found an unexpected error like below:
Device Locked
Device Management has restricted certain features on your device.
Please contact the administrator to re-install Device Management to recover your restriction.
Now I can't access CAMERA(security policy restricted camera), SD-Card not found(showing not inserted), Bluetooth is also disabled. USB-debug is also disabled although DEVELOPER OPTIONS is enabled. Screen-shoot is also disabled. I have flashed my mobile multiple times after that occurrence with proper updated files(AP,BL,CP,CSC,pit). But my problem is still remain. I really don't know what to do. Plz help me out. Thanks in advanced.
N.B: I have also used a fresh gmail account but problem still remain. I have a backup EFS folder but i can't root my phone as usb-debug is disabled. I was tried multiple times to root my phone by CF-Auto root for sm-g930k but it stuck on KT logo and as a result i have flashed it again and again. :crying:
Sorry for my bad english.
Sent from my SM-G930K
Hello
Info:
Updated recently to 11 using full factory image with wipe (with - w flag).
Rooted with Magisk (canary update channel, see images)
Patched clean boot file and flashed with fastboot flash boot magisk_patched.img
All good.
Problem: trying to open a .docx file from storage with M$ Word. Screen goes black and phone restarts. On first restart I get the dreaded "cannot load android system - try again or factory reset. Luckily try again does boot my phone.
Attempted solution: remove and reinstall word - click uninstall -" the app wasn't found in the list of installed apps" - see image.
Went to play store to reinstall - only have "open" button - when clicked, screen goes black and back to "cannot load android system" screen ?
Any ideas/advice much appreciated
Many thanks
*Update*
Couldn't resolve via normal methods -
Used App Inspector (UBQSoft) from playstore to see if M$ Word showed up in there and it did:
From there, clicked the cog wheel to go through to "App Info" screen and was able to successfully uninstall from there.
Installed the Office full suite as a work around and am now able to open the document as needed.
Any thoughts or info still appreciate - especially if anyone has had a similar bug, even with different apps.
Many thanks ?
Further Update
So, I've gone back to the same document about an hour after being able to open it - same prob, screen goes black, phone restarts to "cannot load android system - try again or factory reset"
Tried open again from within Files,
got message "none of you apps can open this file"
I have office installed - see images.
I think I'm going to go back to Android 10 - this is quite the inconvenience for the time being
Not sure if it's 11, Magisk or kernel (using the latest EXKM)
but it's system UI that keeps crashing - I cleared out storage and cache as I am currently unable to uninstall Office, even via App Inspector.
*Solved*
Removed one of my Outlook/Micro$oft accounts to which Word and Office were both previously syncing - removed Office via playstore Uninstall button and rebooted phone.
Tested opening the same document both from Files, SolidExplorer and from within Word, opens for editing no probs and performs as expected.
Root and EXKM still installed and fine.
Sorry for multiple updates, just thought it might be useful for anyobe with similar issues.
?
Hello Guys,
I come in need of a help,
I'm writing from my computer now,
Yesterday my phone was working fine,
Today morning, I updated the apps on my phone; amongst the updates was android system webview.
After a reboot, my phone is unresponsive, it won't open any of the apps from that point.
I reboot again, since keyboard doesn't work, I used the OTG cable to use the physical keyboard to enter the password and get in. Tried entering setting to uninstall that crap app, settings is unresponsive.
No SIM services, no keyboard, no fingerprint, no settings etc.. basically nothing works and everything says "unresponsive and asks to either wait or close".
The only thing I have now is TWRP Recovery, and I'm inside it now.
I've wiped Cache + Dalvik / ART Cache : Result still same, nothing works.
I mailed [email protected] (which is provided in the app's "Developer" section) about this and got a reply that the mail is no longer being monitored.
Can someone please let me know how I can remove android system webview by using TWRP ? So that I can enter the phone back again as normal..
Device Details:
Lenovo K8 Note
Android 7.1.1 Nougat, (Never updated the OS)
Device has been rooted and has recovery options.
I think you can find WebView module in Magisk respiratory so I suggest you give that a try. Flash it and I think it will be fine as long as you have Magisk installed, of course.
dedq said:
I think you can find WebView module in Magisk respiratory so I suggest you give that a try. Flash it and I think it will be fine as long as you have Magisk installed, of course.
Click to expand...
Click to collapse
Thanks, I couldn't quite understand that..
I've never read/seen a need for Magisk so far.. so may I know what is the procedure to be done here...?
I do read Magisk is a systemless Root, (I already have SuperSu, is that the same functionality? (though I can't open anything that is))
Find the Magisk zip on Google and flash it over TWRP.
Head over to the Magisk module site and you will be able to find an alternate WebView module you can flash. It will be in zip format so I guess you will need USB to transfer those files to your phone since you cannot use it to download modules.
dedq said:
Find the Magisk zip on Google and flash it over TWRP.
Head over to the Magisk module site and you will be able to find an alternate WebView module you can flash. It will be in zip format so I guess you will need USB to transfer those files to your phone since you cannot use it to download modules.
Click to expand...
Click to collapse
Understood, thanks..
Will try this out.
KillerBeeSama said:
Understood, thanks..
Will try this out.
Click to expand...
Click to collapse
Give it a try and come to tell if you have sorted it out.
If not, you will probably need to flash your ROM again hoping the application won't stay updated but to back to stock version.
dedq said:
Find the Magisk zip on Google and flash it over TWRP.
Head over to the Magisk module site and you will be able to find an alternate WebView module you can flash. It will be in zip format so I guess you will need USB to transfer those files to your phone since you cannot use it to download modules.
Click to expand...
Click to collapse
Oh, one more thing,
Does this procedure mean, I'll lose TWRP and SuperSu?
Can I not just downgrade the android system webview manually itself?
KillerBeeSama said:
Oh, one more thing,
Does this procedure mean, I'll lose TWRP and SuperSu?
Can I not just downgrade the android system webview manually itself?
Click to expand...
Click to collapse
You won't lose TWRP but I am not sure about SuperSu since it's very old and people don't use it from the time Magisk appeared. I don't think you will be able to have both TWRP and SuperSu.
It would be good for you to just uninstall the updates of WebView if you can use your phone at all. That would solve the problem.
TWRP basically is a menu what allows you to select and apply ADB and/or Fastboot commands.
SuperSU is a Superuser access management tool: it requires SU binary got installed on Android.
Both mentioned sofwares are completely different things, don't depend on each other.
BTW:
I always root Android without the need to make use of Magisk or SuperSU.
So, I went through these
[MAGISK] [MODULE] Webview Manager
Welcome to the XDA home of Webview Manager by Androidacy Read about it on our blog: https://www.androidacy.com/tag/webview-manager/ What is this? This magisk module allows to install several webviews and browsers, replacing the stock one with...
forum.xda-developers.com
Android system Webview installed but not used by apps
I downloaded and installed the latest version of android system WebView from the app store on my android tablet (running 5.0.2). But apps still go on using the old webview version (39.0.0.0). Ho...
android.stackexchange.com
SystemWebView releases
SystemWebView releases
www.bromite.org
Installing SystemWebView
Bromite is a Chromium fork with ad blocking and privacy enhancements; take back your browser! - bromite/bromite
github.com
I got is, .. the adb and appt command says "not found". so.. confusion. and I also see that Bromite System Webview might or might not work on some apps..
So,
Is there a way to downgrade an app through recovery mode
or delete that app's data and start from scratch for that alone?
or is there a way to flash an old Android System Web View through TWRP?
Please help, I have spent the whole day trying to fix this.
I already have SuperSu and it seems if I need to goto Magisk (which is just for that other webview application, I have to do a lot of rolling back and applications going away, ) I don't want that..
Let's keep the Magisk idea as last resort and please let me know if there is any other way to delete the entire Android Webview related stuff and start from beginning.
<bump>
Attached the attack of errors. (these are just few of the ANR popups, there are lots more.. at the last screen you can see even settings won't respond)
My recommendation: Reflash phone's Stock ROM to get rid off of all modifications you applied so far, then restart modding from the scratch.
jwoegerbauer said:
My recommendation: Reflash phone's Stock ROM to get rid off of all modifications you applied so far, then restart modding from the scratch.
Click to expand...
Click to collapse
Just because of one application?
I just want that android webview gone/replaced with a stable one, is that not possible without destroying everything?
Thanks everyone.
we have a solution,
In my case, uninstalling the Xposed framework fixed it for me..
So, while working on this issue I had made a flow map and a log of what is done and its results, may be someone else can benefit from it in the future..
Spoiler: Tries and results
Even starting the entering phone itself is a big issue, because the keyboard applications don't come up; fingerprint doesn't work on first boot as a security measure as well; connected physical keyboard to OTG to phone to enter password... then greeted with lots of errors of all the applications.
Asking people blowed over 'to buy a new phone'
Posted to Reddit, no replies
Posted to Google support, got crappy bot_ish answers; who even hires these people!
Posted to XDA, have some ideas worth trying
Unpacking the system web view.apk on computer gives crap details as it is almost completely encrypted.
Going rabbit hunting through the rabbit hole, checking each folders on "/"
found something similar /system/app/WebViewGoogle/WebViewGoogle.apk
Quick google search confirms that I’m on the right path to finding it...
May be data or XML is somewhere too?
Deleted(copied and deleted) /system/app/WebViewGoogle/WebViewGoogle.apk
Result, Same
Then Reverted
PS: Original Copy at ext_sdcard
Replaced the existing one (92.0.4515.115 with 90.0.4430.210)
Result, no changes.
Then reverted with the crappy original
May be adb will install properly?
Tried adb commands on phone on TWRP, doesn't work
Tried adb from computer to phone, unable to connect to phone.
Was doing it wrong, while in TWRP, I need to initiate "ADB Sideload" and then connect from PC (with Firewall allowed)
then "adb devices", shows connected device with serial number
after the above, the adb push keeps saying "error: connect failed: closed"
turning phone ON and connecting for additional settings (USB debugging) pops "mtp host failed" as soon as I wire..
Started the phone, switched over to Guest account, (oddly seems stuff there are kind of better with lesser error messages), tried launching playstore and wifi, both need password which I don't have, entering settings, hangs for a while, quickly go to apps and uninstall updates for android system web view.. web view becomes 0.0.1
results, fail
Created a temporary user account on phone whilst booting, (because of the observable lesser apps running if I switch over from main..)
added my gaccount on it,
launched playstore to update the android system web view..
the update is stuck at 60%~70 %each time and is unable to complete..
took the v90 application that is on pendrive, connected otg.. and started to install application manually from there..
it said, no space.. even though there is around 4 GB free... continued to disable other applications, such as chrome, youtube, drive etc..
still unable to install the v90 application
even installing other apps (sudoku example) have the same issue,
and then I see a popup that package manager has stopped working (aha! so that itself doesn't work, then can't install),
Went to see if I can change something on developer options, developer option wont come up even after 7+ taps.. hmm strange, may be only main account can have dev options.
While at it, swapped out the Gboard with older AOSP keyboard (retaining Fleksy though).
Rebooted and tried again.. no fix yet..
Atleast I don't have to switch to physical keyboard now for every reboot, since the inner older keyboard comes for first boot.
By TWRP, removed existing app and replaced with v87; doesn't seem to be any different, same errors...
Was about to install the Magisk but it seems to have lots and lots of catches to it, and things to-do before I can go to that...
Continuing investigation on how to downgrade and get back to older state
Through TWRP, deleted the app folder from /system/app/WebViewGoogle/WebViewGoogle.apk
researched to see if there is something else to delete, couldn't find much... proceeding from what we know...
Removed ATSystem.apk (3C's helper) from /system/priv-app just in cast (copy placed at ext_sdcard)
result no change..
Started at around 31-Jul-21 13:00 and went on till 01-Aug-21 01-26 pausing to for the day to rest...
Restored App Folder back to /system/app/WebViewGoogle/WebViewGoogle.apk
WebViewGoogle.apk is v90 again.. (the original seems to be missing, meh, not like it's going to fix)
reboot, result, no changes.
Starting step to install magisk
Removing xposed now..
wiped dalvik cache
rebooting
Kind of stable!!!
Everything seems to work?!?!
Firewalled all app except playstore and mail,
mail seems to work, but can't open the mails (just the headers are received), clicking on the mail says "unable to inflate webview"
aha, I forgot that I have v87 still, if I update that again, will it work (if it doesn't we know how to revert now)
proceeds to update v87 to latest
reboots,
I guess issue resolved by uninstalling xposed, next step to enter phone and move data to safe zone and think about next step.
Are you using xprivacylua?
VD171 said:
Are you using xprivacylua?
Click to expand...
Click to collapse
No, I do remember hearing about it.
GUys, i have installes a system webview on my Samsung J2 core, after restarting my phone stuck on int boot animation, then i do the hard reset combination keys and keeps from restarting. what should i do.
TUPANGPUTi23 said:
GUys, i have installes a system webview on my Samsung J2 core, after restarting my phone stuck on int boot animation, then i do the hard reset combination keys and keeps from restarting. what should i do.
Click to expand...
Click to collapse
Oh... sorry to hear that.
I don't know the solution to that, because mine is rooted I was able to get into the custom recovery and fix things.. not sure what can be done here for your case, (I do know that the old samsung's default recovery is kinda unreadable for English speakers)
So, I think it's best for you to start a new thread in the forum, because if you make a new thread there's a higher chance of reply than this thread which is already marked solved.
(plus. please do attach any photos even crude it may be, still will help people see and suggest actions)