I had a problem with my asus zenfone 2 ZE550ML flashing the rom via the voice: "install update from ADB" arrived at 1/4% the installation crashes and everything goes wrong, I tried before flashing the firmware to format the mobile phone via the PC since it is impossible to turn it on because it does not start ... after a few commands left via ADB it no longer goes to the screen where the ASUS logo loads and in the fastboot screen it tells me in blue "waiting CMD" something of the kind .. after doing these tests, desperate, I took him to a service center, and he told me the guy who does not receive the software because the motherboard is burned ... how can you help me? Thanks in advance for who will do it?
Related
Hey guys, I've ran into a problem here maybe you guys can help me out. An update for my phone came today I downloaded it. After I installed it the device tried to restart as it should. But the phone wasn't able to boot. There was a USB logo on the screen which just came for a fraction of a second and the phone just powered off again. I was able to open Droidboot I tried recovery, factory reset but after I selected any option the phone had to restart and the USB logo came as I mentioned before. My device is rooted and it's running Android 4.4.2 KitKat. Any help would be greatly appreciated . Please help me. :crying:
CAL1BER said:
Hey guys, I've ran into a problem here maybe you guys can help me out. An update for my phone came today I downloaded it. After I installed it the device tried to restart as it should. But the phone wasn't able to boot. There was a USB logo on the screen which just came for a fraction of a second and the phone just powered off again. I was able to open Droidboot I tried recovery, factory reset but after I selected any option the phone had to restart and the USB logo came as I mentioned before. My device is rooted and it's running Android 4.4.2 KitKat. Any help would be greatly appreciated . Please help me. :crying:
Click to expand...
Click to collapse
try waiting for atleast 10 minutes coz first boot of new softwares takes a little time
else you can contact to manufacturer
Well.
Few days ago I recived the notification for the OTA update of the tablet. I have CWM Recovery (and the device rooted, of course) and i tried to apply the OTA normaly. When the device restarts to do the update, it gets stucked in the recover.
I tried to do a factory reset, but it dosen't work (stills getting stucked at any restart). I also tried to download the OTA files into my PC and apply them throught "adb sideload", but I only have found the files for G Pad 8 /8.3.
Someone have any idea?
Thanks for all!
XDA Visitor said:
Well.
Few days ago I recived the notification for the OTA update of the tablet. I have CWM Recovery (and the device rooted, of course) and i tried to apply the OTA normaly. When the device restarts to do the update, it gets stucked in the recover.
I tried to do a factory reset, but it dosen't work (stills getting stucked at any restart). I also tried to download the OTA files into my PC and apply them throught "adb sideload", but I only have found the files for G Pad 8 /8.3.
Someone have any idea?
Thanks for all!
Click to expand...
Click to collapse
Hello and welcome to XDA! I suggest you register and post your question in the following thread, which deals partly with LG Pad 7: http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995 People there might be able to help you out.
Good luck!
Hi Experts,
I was doing factory reset and my battery died in the middle of the process since then my phone is stuck at usb logo whenever i connect to pc/or turn it on it doesn't do anything.
asus.com/zentalk/data/attachment/forum/201501/16/182639lnd5bpp2db5yb5ub.jpg
s3.postimg.org/gfdfrfcz6/20150925_163022.jpg
4.postimg.org/9u8d47rst/20150925_164818.jpg
s11.postimg.org/dw1n6sajn/20150925_164917.jpg
I shout out to all the experts to help me as i have gave up try to almost all the solution online for doing flash firmware but no avail .
i just dont know which one is for myphone and how i have to install it.
PS Phone is not rooted.
Appreciate all ur help
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
chris10286 said:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
Click to expand...
Click to collapse
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
chris10286 said:
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
Click to expand...
Click to collapse
Glad you managed to fix it yourself.
If you have further questions, feel free to ask in the help thread for the Xperia SP
http://forum.xda-developers.com/xperia-sp/help
Thread closed.
Hi,
I bought a zenfone 6 from China. That is CUCC rom. I tried to change it into WW but failed. (Actually I wanted to use google services.) Then my phone got soft bricked but it was running good as before. I tried many times to convert into WW but each time could not run recovery mode. While running recovery, a usb logo with white bar appears. Sometimes the bar turns into red.
Then I downloaded Gapps for zenfone 6 and copy system folder from it into external sd card. Then I cut original system folder from my phone to external sd card to save a backup before pasting new one from Gapps. But while cutting the original system file, the phone got hanged. Then I power off the phone and try to power on again but the phone stuck on the ASUS logo. I can enter fastboot mode but can not enter recovery or hard reset because usb logo appear then.
If I enter fastboot mode, now it shows WW A600 CG. But before it was CUCC T00G. I don't know when it changed.
Please help me to solve this. Plz plz plz.
Thanks in advance.
toufiqnoor said:
Hi,
I bought a zenfone 6 from China. That is CUCC rom. I tried to change it into WW but failed. (Actually I wanted to use google services.) Then my phone got soft bricked but it was running good as before. I tried many times to convert into WW but each time could not run recovery mode. While running recovery, a usb logo with white bar appears. Sometimes the bar turns into red.
Then I downloaded Gapps for zenfone 6 and copy system folder from it into external sd card. Then I cut original system folder from my phone to external sd card to save a backup before pasting new one from Gapps. But while cutting the original system file, the phone got hanged. Then I power off the phone and try to power on again but the phone stuck on the ASUS logo. I can enter fastboot mode but can not enter recovery or hard reset because usb logo appear then.
If I enter fastboot mode, now it shows WW A600 CG. But before it was CUCC T00G. I don't know when it changed.
Please help me to solve this. Plz plz plz.
Thanks in advance.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
You can post your query in ASUS Zenfone 5 and Zenfone 6 - All you need to know about.Experts there may be able to help you.
Good Luck!
___
v7
XDA Assist