Does this phone have the fastboot oem boot-on-charge command or any other easys way to have the phone boot when it starts to charge?
Related
I tried to root my Motorolo Xoom 3G however after appliying fastboot reboot commend the device stays at the screen where Motorola logo and Dual core technology are.
The device is not responding any commend that I applied via PC.
I am able to enter fastboot protocol.
Here are the commends that I applied.
1 - adb reboot bootloader
2 - fastboot oem unlock
3 - fastboot flash boot boot.img
4 - fastboot reboot
After I applied all these commends , in MsDOS screen there were fihished text.
What should I do to start the device system again?
ssan said:
I tried to root my Motorolo Xoom 3G however after appliying fastboot reboot commend the device stays at the screen where Motorola logo and Dual core technology are.
The device is not responding any commend that I applied via PC.
I am able to enter fastboot protocol.
Here are the commends that I applied.
1 - adb reboot bootloader
2 - fastboot oem unlock
3 - fastboot flash boot boot.img
4 - fastboot reboot
After I applied all these commends , in MsDOS screen there were fihished text.
What should I do to start the device system again?
Click to expand...
Click to collapse
You can manually reboot by pressing volume up a power and holding until it reboots, then when you see the red dual core screen tap volume down and then volume up. You should be back in 'starting fastboot protocol' again. Make sure you have actually unlocked. Try fastboot oem unlock again and if it gives you instructions on the Xoom screen, follow them all. It should reboot into the os...skip all set-up steps except go into settings /applications/development and make sure debugging is checked. Then reboot back into fastboot and continue with what you are doing.
I unlocked it again however still it stucks at the Dual core screen. Is there any other operation to start the system.
By the way, I am using a Turkish version of Motorola Xoom 3g. I guess it is an important detail.
I have resolved the problem.
I downloaded MZ601_H.6.1-38-11_Retail_Turkey file from motorolo developer web site.
Fastboot flash boot bot.img
Fastboot flash system system.img
Fastboot flash recovery recovery.img
Fastboot flash userdata userdata.img
Fastboot erase cache
applied the above commends.
ssan said:
I have resolved the problem.
I downloaded MZ601_H.6.1-38-11_Retail_Turkey file from motorolo developer web site.
Fastboot flash boot bot.img
Fastboot flash system system.img
Fastboot flash recovery recovery.img
Fastboot flash userdata userdata.img
Fastboot erase cache
applied the above commends.
Click to expand...
Click to collapse
Great news! It's so good when you can resolve your own problems!
I used Recovery-Tools to flash TECNO-P5_130916__recovery_140106-193223.img onto my phone. The process completed and I was prompted to boot into recovery. The reboot did not complete.
I can get into the boot menu (Volume Up + Power), but when I select Recovery mode or Normal mode the phone gets into a boot loop. Fastboot mode woks and I can connect from Windows 7.
The problem in Fastboot is that I cannot flash a ROM since the bootloader is locked (I get the error "Security deny - Err:0x2017").
Is there a tool that can either unlock the bootloader or reset the phone to factory settings so it can boot normally?
I already tried fastboot oem unlock and it just hangs at "..." No "fastboot oem ...." commands work
fastboot devices shows "mt6572v1_phone fastboot"
Hi there can someone run fastboot getvar battery-voltage
I need charge my phone up to 30% or more
Can someone post something above 40% so I could check how long i need run fastboot bootloader reboot to charge my phone
Thanks
So, Iwas using Havoc Os 3.8 on my realme 5i, but I wanted to lock bootloader again, then I entered fastboot mode and locked bootloader, but I stucked in fastboot mode, It looped. Could not enter recovery or system. Only fastboot mode, because bootloader is locked I couldnt flash anything. I tried fastboot flashing unlock command but it did not work.
But solution was very easy, fastboot was not actually fastboot, everytime I power off device and power up there was not fastboot writing and robot icon, just directly fastboot itself. So actually it is fake fastboot, you just need to use volume buttons and select reboot to bootloader option, once device reboot you will see now fastboot- robot icon then fastboot itself, now you can unlock device with "fastboot flashing unlock_critical" command.
First, power off. Then wait for couple of minutes then start fastboot again.
Hi,
Need help getting the Moto G7 Power out of boot loop.
Issue.
The phone is stuck on boot loop. I get blue screen with Moto Logo and then goes blank, It keeps repeating until the battery drains out.
The bootlocker is factory locked I think. When I press Vol down and Power keys together, it shows AP FastBoot Flashmode for maybe 2-3 Sec and then goes back to boot loop. It does not stays on Fastboot mode long enough to debug.
Tried using moto rescue tool but the moment tool starts recognizing the device, it goes out of fastboot into boot loop.
Anyone knows what can be done
lv.onlythebrave said:
Hi,
Need help getting the Moto G7 Power out of boot loop.
Issue.
The phone is stuck on boot loop. I get blue screen with Moto Logo and then goes blank, It keeps repeating until the battery drains out.
The bootlocker is factory locked I think. When I press Vol down and Power keys together, it shows AP FastBoot Flashmode for maybe 2-3 Sec and then goes back to boot loop. It does not stays on Fastboot mode long enough to debug.
Tried using moto rescue tool but the moment tool starts recognizing the device, it goes out of fastboot into boot loop.
Anyone knows what can be done
Click to expand...
Click to collapse
Put phone manually in fastboot then in terminal yup fastboot -w
roadkill42 said:
Put phone manually in fastboot then in terminal yup fastboot -w
Click to expand...
Click to collapse
Sorry, I am still new to the technical terminologies. Do you mean I should put the phone in fastboot using Vol down+power keys and then use tis command?
I tried putting phone in fastboot, connected it to windows via usb-c and then in the cmd prompt (after entering fastboot folder), typed fastboot -w.
I got below message and then phone went back to boot loop.
Erasing 'userdata' OKAY [ 1.542s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Erasing 'metadata' OKAY [ 0.072s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Finished. Total time: 1.657s
One min later, I am getting the below message on screen.
Boot failed, Press power key to retry.
No bootable A/B slot
Failed to boot Linux, falling back to fastboot
Fastboot reason - Fall through from normal mode.
This keeps looping on/off the screen
Do u have the stock firm ware down loaded for ur phone can u post a screenshot of ur fastboot screen