Hi there!, i just bought a Huawei Maimang 5(MLA-AL10, Chinese Version) two weeks ago, then i noticed it had android 6.0 so i decided to upgrade it to 7.0..., since the Huawei Updater didn't find any update for my cellphone i downloaded FirmwareFinder App and use it instead, it worked but during the process the phone just rebooted and got bricked.
I tried to "save it" installing a new firmware via MicroSD, using Huawei eRecovery and Adb Tools, and nothing worked. Here my doubts:
1. Via MicroSD: i' m not sure the firmware i put on the card was the correct, i have found a lot of MLA-AL10 Roms and tried them all without any good results, the phone just start installation and at 5% reboot itself. Is there anyone out there who can help me finding the right one?
2. Via Huawei eRecovery: after i connect to a wifi network, my cellphone shows the next message: "There's no info for the package installed" and the only options i have left are: "Shutdown or Reboot", so i discarded this solution.
3. Via Adb Tools: using command "ADB DEVICES" shows empty list, i have no idea what i am doing wrong, my laptop recognize the phone and HiSuite too, but not Adb.
Hope someone can help me out.
Note: the phone has USB debugging disable.
Try recovery http://www.hardreset.info/devices/huawei/huawei-maimang-5/recovery-mode/
I forgot to mention i tried that too, and i cannot wipe data..., after 5% or 6% the EMUI logo dissapear and shows an exclamation mark.
Maybe this post will be help you https://forum.xda-developers.com/mate-8/help/boot-to-fastboot-mode-flashing-restore-t3550116
The solution is DC-Phoenix + 15 credits
Hello hope someone can help please have been trawling forums for a week now without getting anywhere.
I was running nxt-l29c636???? tried to upgrade via app firmware finder, first two I picked just failed then I picked older one thinking I might need to go from android 6 to 7 then to 8
Now it's stuck in a loop.
The firmware I picked looked like it was installing but failed early on 1 or 2 %
I can get to erecovery - does nothing and I've tried copying update.app to SD card and holding three button method but it does nothing.
When I fastboot it and rescue mode my phone status is locked.
Anyone know how I can recover please?
Ideally just want to flash it and if so it'd be great if it was android 8
Thanks for looking
So I fixed this by using the excellent DC-Phoenix, my problem was drivers
So for any noobs out there, got this work. My problem was the phone would never go into upgrade mode. The problem was in device manager (windows 7x64 but doesn't matter which version of windows), was when DC-Phoenix tried to put the phone in upgrade mode the command was sent and acted on but device manager showed warning triangles that it didn't have a driver or the driver was only partially loaded.
When I directed it to the downloaded Hi-Suite (which has all the drivers) it loaded the driver(s) there are TWO drivers on virtual COM ports. So if you phone is not going into upgrade mode best to check that Windows can actually see these TWO COM ports.
Hi hope someone can advise as I'm loosing the will to live
I've a mate 8 NXT-L29C636 which I believe is asia region although I've from the UK
I was running stock android 6 with EMUI 4.0
When I ask it to check for any update, it always came back with no updates.
I saw plenty of threads saying they had updated to android 7 and 8 and how they done it.
So I downloaded Firmware Finder from Google play and without too much difficulty managed to start installing firmware. That's when my problems started
This was two weeks ago and I've been spending 100+ hours trying to recover.
I think it failed a 5% or something and since then my phone will not boot properly.
I can only fastboot it and sometimes to erecovery and EMUI to wipe/factory reset
Searching forums it seems DC Phoenix was the only software that could help so I bought it.
So far I've tried flashing firmware from DC-Unlocker site in standard more but all goes ok with success for all the partitions but it requires the phone to put into upgrade mode, something my phone never does and I can't force it.
So that leaves me with advanced mode, again all successful but booting the phone just gives the huawei logo then reboots again
I've tried different stock roms NXT-L29C636 but they all claim successful but still can't boot my phone
I've followed the steps in DC-Phoenix instructions to no avail.
The last step today meant shorting a pin to ground to force the phone into a mode when it was seen as windows as Huawei USB COM device, which seemed to work.
The instructions claimed I can use any NXT board flash as they're all the same and again all successful i used
NXT-AL10_M00A102_Board Software_Global _Nonspecific_Android 6.0_EMUI 4.0_05021WLB_4.dtwork
but the log file now says build is;
Build number: HLNXTAL10BM00A102
Model: HUAWEI NXT-L29
Battery state: 3249mv
from
Build number: :NXT-L29C432B192
Model: HUAWEI NXT-L29
Battery state: 7035mv
So my question is am I using the wrong firmware? It is always successful so I don't think it's bricked but I can't work out what I'm doing wrong.
Other things to mention is pressing vol - and vol + and power with sd card and dload doesn't work either.
Sorry for long post and thanks for reading
Any help very much appreciated
No-one? I didn't expect a reply right away, but I can't be the only one with questions? Is there a better forum to post on?
Thank you
so for any noobs out there, got this work. My problem was the phone would never go into upgrade mode. The problem was in device manager (windows 7x64 but doesn't matter which version of windows), was when DC-Phoenix tried to put the phone in upgrade mode the command was sent and acted on but device manager showed warning triangles that it didn't have a driver or the driver was only partially loaded.
When I directed it to the downloaded Hi-Suite (which has all the drivers) it loaded the driver(s) there are TWO drivers on virtual COM ports. So if you phone is not going into upgrade mode best to check that Windows can actually see these TWO COM ports.
Hope this helps someone
Hi all, thanks for stopping by...bear with on this one ill try and give as much detail as I can.
ok so, my son dropped the android 11 beta into the phone and ran the install from the power volume down menu, well we at least think it was the beta, and here now are the problems I'm trying to fix for him.
phone in a boot loop
vol down and power recovery gives
kindly reminder
system error, after select language please select online update ( keep data ) to recovery system, thanks!
this does not work - says cant find wifi , I'm then left with turn off and install from storage ,reboot and 2 chineese options that I assume are the same.
when I plug the device into windows 10 pc ( also tried a chromebook ) the pc acknowledges the phone but does not spring up as a storage device so I cant pop the old OS on it to my frustration.
it shows up in device manager for about 40 seconds while booting then disconnects and when it shows ALL its drivers are flagged as problematic , I get
DPL Data
OPPO Find X2 Pro
OPPO Find X2 Pro
OPPO Find X2 Pro
QDSS DATA
QDSS DATA
RmNet
all the above appear in the device manager as issues. when I try to update driver it simply says it cannot find drivers for your device, tried to uninstall etc but just comes back as a error flag in devices.
any ideas on how to get the colourOS back on it at all please? willing to pay for a remote in and fix if such a thing exists too. I am guessing USB debugging etc isn't enabled and that's why the device isn't popping up...not sure if I can change this not via the phone but pc?
thanks all
Dan
I learned a lesson that find X2 pro is like Huawei
Can't play with roms like OnePlus.
I would recommend to send to service center
Hey guys!
I spent hours on end trying everything In my power to downgrade, long story short I'm on ELS-LGRP4-OVS 11.0.0.193 and I want to downgrade to any version 10 so I could install google services.
For the past couple of days, I've been either getting a connection error in the HISUITE after i use the hisuite proxy successfully, or the hisuite proxy doesn't even patch and it shows some mistake...I've tried hisuite versions, well most of them, and 2 versions of hisuite proxy. Could somebody help , ill donate for a beer or coffee if it works, willing to share a screen or whatever is necessary .
kefi999 said:
Hey guys!
I spent hours on end trying everything In my power to downgrade, long story short I'm on ELS-LGRP4-OVS 11.0.0.193 and I want to downgrade to any version 10 so I could install google services.
For the past couple of days, I've been either getting a connection error in the HISUITE after i use the hisuite proxy successfully, or the hisuite proxy doesn't even patch and it shows some mistake...I've tried hisuite versions, well most of them, and 2 versions of hisuite proxy. Could somebody help , ill donate for a beer or coffee if it works, willing to share a screen or whatever is necessary .
Click to expand...
Click to collapse
Can you try on another PC? I had "No internet" error in Hisuite on my PC but it worked on another.
kefi999 said:
Hey guys!
I spent hours on end trying everything In my power to downgrade, long story short I'm on ELS-LGRP4-OVS 11.0.0.193 and I want to downgrade to any version 10 so I could install google services.
For the past couple of days, I've been either getting a connection error in the HISUITE after i use the hisuite proxy successfully, or the hisuite proxy doesn't even patch and it shows some mistake...I've tried hisuite versions, well most of them, and 2 versions of hisuite proxy. Could somebody help , ill donate for a beer or coffee if it works, willing to share a screen or whatever is necessary .
Click to expand...
Click to collapse
Otherwise, someone already succeeded using this method
Googlefier - Install GMS on Huawei/Honor
Wecome to Googlefier, After a successful tool for LG G2 and LG G3 owners (AutoRec), but after a long pause, here is something new and I hope useful Googlefier is a simple tool, designed to help you install GMS on your Huawei/Honor device...
forum.xda-developers.com
I have google, but I try to downgrade with hi suitr proxy and seems good.
Try this VIDEO
Before, uninstall your hi suit, restart computer and install hisuit from this video (hi suit and hi suit proxy).
Be prepared the lose USB connection to PC, USB OTG memory stick, etc. in case you downgrade from 193. It is better to have a Huawei nano memory card too if you want to install Google services. Upgrading back to 193 will solve the USB errors.
badmania98 said:
Be prepared the lose USB connection to PC, USB OTG memory stick, etc. in case you downgrade from 193. It is better to have a Huawei nano memory card too if you want to install Google services. Upgrading back to 193 will solve the USB errors.
Click to expand...
Click to collapse
Yes, i hear that. My friend use this method and was everything ok. I try in weekend and then write you
qbic7 said:
Yes, i hear that. My friend use this method and was everything ok. I try in weekend and then write you
Click to expand...
Click to collapse
I know for sure.
And this is the guide. Downgrade to 131 or 121.
badmania98 said:
I know for sure.
Click to expand...
Click to collapse
Ok. But if i can downgrade to 10.0.0.131 then i can install google (download file to phone via wi fi) and then I upgrade to 11.0.0.193 and have full working phone. Right ?
Right.
qbic7 said:
Ok. But if i can downgrade to 10.0.0.131 then i can install google (download file to phone via wi fi) and then I upgrade to 11.0.0.193 and have full working phone. Right ?
Click to expand...
Click to collapse
Right 100%.
badmania98 said:
Be prepared the lose USB connection to PC, USB OTG memory stick, etc. in case you downgrade from 193. It is better to have a Huawei nano memory card too if you want to install Google services. Upgrading back to 193 will solve the USB errors.
Click to expand...
Click to collapse
Hi badmania98
yesterday i bought an used p40pro,
Modell: ELS-NX9
Build : 11.0.0.193 (C432 E3R6P4)
Base Soft Version: ELS-LRGP4-OVS 11.0.0.0193
Cust Soft Version: ELS-N29-CUST 11.0.0.3 (C432)
Preload Soft Version: ELS-N29 11.0.0.4(C432R6)
I wanted to downgrade it and install GSM and playstore and notifikations like in your video with hisuite.
When i put the usb cabel in it makes a sound but nothing hapens, if i activate hdb / or adb or usb debuging it do the typical windows sound but nothing happens . I restarted everithing and its the same.
So i think the usb connection is broken some how, i also cant send data or photos to the pc, ans overall i cant connect to hisuite.
But i tried to put in an otg usb drive and it is rekognized an i can acces it.
So i tried to do the flasch over the usb otg memory stick, but it says its the wrong file
i used this:
(els-nx9-10.1.0.121(C432E8R5P2)
Can you help me to fix the usb , or to downgrade via otg memory stick .
CitizenCer0 said:
Hi badmania98
yesterday i bought an used p40pro,
Modell: ELS-NX9
Build : 11.0.0.193 (C432 E3R6P4)
Base Soft Version: ELS-LRGP4-OVS 11.0.0.0193
Cust Soft Version: ELS-N29-CUST 11.0.0.3 (C432)
Preload Soft Version: ELS-N29 11.0.0.4(C432R6)
I wanted to downgrade it and install GSM and playstore and notifikations like in your video with hisuite.
When i put the usb cabel in it makes a sound but nothing hapens, if i activate hdb / or adb or usb debuging it do the typical windows sound but nothing happens . I restarted everithing and its the same.
So i think the usb connection is broken some how, i also cant send data or photos to the pc, ans overall i cant connect to hisuite.
But i tried to put in an otg usb drive and it is rekognized an i can acces it.
Can you help me to fix the usb , or to downgrade via otg memory stick .
Click to expand...
Click to collapse
You have to install original HiSuite first. It contains the USB driver. If doesn't solve the connection between computer and phone try to change the computer or the USB port. I hope you use original USB cable.
If no method works, reset the phone to factory settings and try again.
Using OTG to downgrade from Emui11 to Emui 10.1 is not working.
Regarding push notification, I use other method.