Was anyone able to successfully root DP3? If so, what were your steps?
TheKnux said:
Was anyone able to successfully root DP3? If so, what were your steps?
Click to expand...
Click to collapse
Well I wouldn't root a Dev Preview if I was you, it may be really unstable.
For the root, there's a general method. Once your Bootloader is unlocked you have to extract the boot.img from the zip you flashed to update your phone to DP3 and patch it with Magisk. Here's a video about that:
There is some that has successfully rooted op8 Pro but I have tried every method that I know on op 8 including patching os11 boot.img with Canary and stable magisk, flash through Chinese twrp (twrp boots but cannot decrypt) and even fastboot flashed a op8 Pro boot. Img but I've not been successful as of yet.. have asked around in telegram also.. seems magisk sees os11 as os10 or something like that.. root will come in sure
Edit: I now have root on op8 DP3..
hagar006 said:
There is some that has successfully rooted op8 Pro but I have tried every method that I know on op 8 including patching os11 boot.img with Canary and stable magisk, flash through Chinese twrp (twrp boots but cannot decrypt) and even fastboot flashed a op8 Pro boot. Img but I've not been successful as of yet.. have asked around in telegram also.. seems magisk sees os11 as os10 or something like that.. root will come in sure
Edit: I now have root on op8 DP3..
Click to expand...
Click to collapse
Mind telling us how?
InsaneJester17 said:
Mind telling us how?
Click to expand...
Click to collapse
there are a couple posts in the guides section
I've tried it several times and never works. Canary and an boot image called new on pro forum and not working at all. I tried IMG from dp3 no luck. I'm done for now.
davekaz said:
I've tried it several times and never works. Canary and an boot image called new on pro forum and not working at all. I tried IMG from dp3 no luck. I'm done for now.
Click to expand...
Click to collapse
You cannot use the image for op8 pro bro.. there is a couple threads on the guide section that'll help you..
Related
I just currently got the latest ota and let it install and I installed magisk from the manager by choosing to install to inactive partition after ota. That worked flawlessly and was able to keep root. But I lost TWRP of course. I was using the official TWRP. I've been noticing everyone going to TWRP bluespark recovery. But which one do I download??? From what I understand there is a version for oos android 8 Oreo and a version for oos android 9 pie. I'm on official oos pie. So which one do I need?
vinnievegas said:
I just currently got the latest ota and let it install and I installed magisk from the manager by choosing to install to inactive partition after ota. That worked flawlessly and was able to keep root. But I lost TWRP of course. I was using the official TWRP. I've been noticing everyone going to TWRP bluespark recovery. But which one do I download??? From what I understand there is a version for oos android 8 Oreo and a version for oos android 9 pie. I'm on official oos pie. So which one do I need?
Click to expand...
Click to collapse
Just take the latest official TWRP and you are fine. Trust me.
https://dl.twrp.me/enchilada/
Thank you. But still would like to know if I decide to use bluespark version.
Sure. If you want to use Blu Spark TWRP use this one twrp-3.2.3-x_blu_spark_v9.86_op6
IMG and zip files are here https://forum.xda-developers.com/devdb/project/?id=27466#downloads
You can use TWRP official or Blu Spark TWRP. What ever you like. Blu Spark is recommended for people coming from oos beta to stable
Pundy said:
Just take the latest official TWRP and you are fine. Trust me.
https://dl.twrp.me/enchilada/
Click to expand...
Click to collapse
Pundy said:
Sure. If you want to use Blu Spark TWRP use this one twrp-3.2.3-x_blu_spark_v9.86_op6
IMG and zip files are here https://forum.xda-developers.com/devdb/project/?id=27466#downloads
You can use TWRP official or Blu Spark TWRP. What ever you like. Blu Spark is recommended for people coming from oos beta to stable
Click to expand...
Click to collapse
May I ask what the difference is?
Just to add a note to you for next ota.
After ota is installed go to magisk manager
Press download
Search for twrp a/b
Install (don't reboot)
Now go to main screen and press install
Choose to inactive slot (after ota)
This way you keep both twrp and root
Happy flashing
vinnievegas said:
May I ask what the difference is?
Click to expand...
Click to collapse
To be honest I don't know the differences between both.
vinnievegas said:
May I ask what the difference is?
Click to expand...
Click to collapse
You can find answer at its topic.
whizeguy said:
Just to add a note to you for next ota.
After ota is installed go to magisk manager
Press download
Search for twrp a/b
Install (don't reboot)
Now go to main screen and press install
Choose to inactive slot (after ota)
This way you keep both twrp and root
Happy flashing
Click to expand...
Click to collapse
Awesome!!!!! That's definitely a game changer!!
Thank you.
Hey, I have unlocked bootloader and have magisk installed.
But every time I have to go to bootloader to boot into twrp because of some issue.
I have the zip and img file of twrp by bluspark.
I have the img of bluspark twrp now I need to know which sector should I need to install. Boot, system or vendor? Please tell me. I'm new here.
there is a problem with magisk 20.1, first boot after all flashes is ok and magisk is working but after I giving root access to first program and going for restart its not booting and going to bootloader.
chetbiz said:
there is a problem with magisk 20.1, first boot after all flashes is ok and magisk is working but after I giving root access to first program and going for restart its not booting and going to bootloader.
Click to expand...
Click to collapse
Which OOS version are you running? Pie or Q?
Koeties said:
Which OOS version are you running? Pie or Q?
Click to expand...
Click to collapse
Android Q final
Hello, I have problem. I´m on Android 11, with OOS 11.1.2.2, but I can´t install TWRP - twrp-3.6.0_11-0-enchilada.img. When I wrote fastboot boot twrp-3.6.0_11-0-enchilada.img, it is stuck on logo a nothing happen. Please how to boot in twrp?
Thank you.
Since kernel releases are yet to be published " a total duck move by xiaomi ?" I wanted to keep on using the stock ROM without changing anything but miui is too cringy for me to live with it, so I need to put the ol'rooting hat once again
My question is.. did any one actually root it using magisk and can still get ota , or you would need to uninstall magisk then update then get magisk again?
Also what happens to TWRP , can it coexist with miui ?
I had a previous xiaomi phone (mido) but tbh I never even thought of using the miui and switched to RR once I unlocked the bootloader ?
You can get ota with magisk but updating will rewrite boot and recovery so you'll need to re-root.
mr-mero said:
My question is.. did any one actually root it using magisk and can still get ota , or you would need to uninstall magisk then update then get magisk again?
Also what happens to TWRP , can it coexist with miui ?
Click to expand...
Click to collapse
FYI, I'm still on stock EU v12.0.3.0 with mauronofrio TWRP and rooted with Magisk.
I got two OTAs already, the last with v12.0.4.0 -- and it even tried to apply one of them while I wasn't looking but it obviously failed, since there's no stock recovery.
pnin said:
FYI, I'm still on stock EU v12.0.3.0 with mauronofrio TWRP and rooted with Magisk.
I got two OTAs already, the last with v12.0.4.0 -- and it even tried to apply one of them while I wasn't looking but it obviously failed, since there's no stock recovery.
Click to expand...
Click to collapse
What if I reflash the stock recovery.img after rooting, that might get the ota working ?
Yes I know I would still have to flash twrp and magisk again after it
I'll test it on my old phone first , hope it can work as a reference for one last time of it's miserable life
mr-mero said:
What if I reflash the stock recovery.img after rooting, that might get the ota working ?
Click to expand...
Click to collapse
I thought the same, but then I'm not keen on moving to v12.0.4.0 right now, so I didn't budge. Let us know how it goes. :good:
.
How to install magisk on stock miui global after bootloader unlock?
@coolboy744:
In case you haven't already, you'll have to install a custom recovery first...
.
pnin said:
@coolboy744:
In case you haven't already, you'll have to install a custom recovery first...
.
Click to expand...
Click to collapse
yes i know that. using since 2015 TWRp. but i heard there is system wipe issue on poco twrp. if you installed it confirm
No issue here, just flashed it through TWRP as usual.
.
what about installing magisk from orangefox? What are the steps?
abubin said:
what about installing magisk from orangefox? What are the steps?
Click to expand...
Click to collapse
Still the same, just flash the root file and reboot it up... And also install magisk manager to have root management
Orange Fox is much more recommended for our Poco by ManoloRey for installing AOSP ROMS...
yan2xme said:
Still the same, just flash the root file and reboot it up... And also install magisk manager to have root management
Orange Fox is much more recommended for our Poco by ManoloRey for installing AOSP ROMS...
Click to expand...
Click to collapse
thanks! done it and it is working now.
All of the similar threads just end after a few replies (I think because people didn't have unlocked bootloaders) so I thought I'd try to ask again. I have a T-Mo OP8 (IN2017) on 10.5.22IN55CB. I already have the bootloader unlocked. But all of the root methods I can find need a payload.bin from the stock firmware, and I can't seem to find that. Is there another method or a source for branded firmware? I wasn't sure if I could do it by just booting the TWRP found on this board without flashing the recovery.
TIA.
SilverZero said:
All of the similar threads just end after a few replies (I think because people didn't have unlocked bootloaders) so I thought I'd try to ask again. I have a T-Mo OP8 (IN2017) on 10.5.22IN55CB. I already have the bootloader unlocked. But all of the root methods I can find need a payload.bin from the stock firmware, and I can't seem to find that. Is there another method or a source for branded firmware? I wasn't sure if I could do it by just booting the TWRP found on this board without flashing the recovery.
TIA.
Click to expand...
Click to collapse
I booted into TWRP and took a backup of the device. I then transferred the backup to my local PC and took the boot file from the backup, renaming the extension to .img. I then put this boot image on my device and downloaded magisk manager and set magisk manager to install magisk by patching a file. Once completed, I downloaded the patched file to my PC and booted to fastboot. While in fastboot, I flashed the magisk_patched boot image to both boot slots (boot_a, and boot_b). Upon rebooting, I had root. One thing, as soon as you have root, I recommend taking an image of your persist file (for fingerprint) to prevent any issues if the persist partition gets corrupted on your device. Search the forum for instructions on how to do this.
Cheers,
B.D.
You literally don't have to do anything special. Boot TWRP, flash Magisk zip in TWRP, reboot. Done.
stompysan said:
You literally don't have to do anything special. Boot TWRP, flash Magisk zip in TWRP, reboot. Done.
Click to expand...
Click to collapse
Works great. Thanks!
BostonDan said:
I booted into TWRP and took a backup of the device. I then transferred the backup to my local PC and took the boot file from the backup, renaming the extension to .img. I then put this boot image on my device and downloaded magisk manager and set magisk manager to install magisk by patching a file. Once completed, I downloaded the patched file to my PC and booted to fastboot. While in fastboot, I flashed the magisk_patched boot image to both boot slots (boot_a, and boot_b). Upon rebooting, I had root. One thing, as soon as you have root, I recommend taking an image of your persist file (for fingerprint) to prevent any issues if the persist partition gets corrupted on your device. Search the forum for instructions on how to do this.
Cheers,
B.D.
Click to expand...
Click to collapse
Post below yours worked for me but I appreciate the advice on backups and what to watch for. I haven't installed TWRP yet, just booted it and installed.
SilverZero said:
Works great. Thanks!
Click to expand...
Click to collapse
I should state one thing that I didn't in my original post. Booting TWRP and flashing that way ONLY works if you are still running Android 10. Since you have a T-Mobile variant, I knew this was a non-issue (we STILL don't have official A11). For those running Android 11, you do have to patch the boot image and flash it like stated above. Also note that this will likely change if we get TWRP on A11. Once we have that working, flashing Magisk from it should work fine.
stompysan said:
I should state one thing that I didn't in my original post. Booting TWRP and flashing that way ONLY works if you are still running Android 10. Since you have a T-Mobile variant, I knew this was a non-issue (we STILL don't have official A11). For those running Android 11, you do have to patch the boot image and flash it like stated above. Also note that this will likely change if we get TWRP on A11. Once we have that working, flashing Magisk from it should work fine.
Click to expand...
Click to collapse
Following up on this just in case you know anything new. My IN2017 just updated to A11 without any action on my part, and I lost root. Is there a TWRP or patched boot img that you know of for us on TMo now?
There is no working twrp for us on Android 11. I also haven't seen a patched boot image of 11.0.1.3.IN55CB around yet. I have that firmware extracted on my laptop so I could grab the boot image and patch it for you, but I won't be able to do that until later tomorrow. If no one else has it out or if you don't find it before I can get to it, I'll post it up.
Edit: Here's the patched boot image: Magisk Patched Boot IMG TMO 11.0.1.3
Hello everyone.
I was wondering if anyone has found a work around to get a custom recovery to work on the oos 11 beta one for op7p gm1917.
I've tried msm tool and have working TWRP untill I install ops 11.
Once I install the beta 1 and TWRP booting to recovery is stuck in a flashing TWRP logo. Only way to recover from this is to flash stock boot image.
I do have root as I patched the stock boot.img with magisk 8.0.4 then flashed the boot image with fastboot.
If anyone could help me get this TWRP up and running I would definitely appreciate it.
Thank you...
mrhodes19904 said:
If anyone could help me get this TWRP up and running I would definitely appreciate it.
Thank you...
Click to expand...
Click to collapse
TWRP is not available for Android 11 yet, so you will have to wait.
nabril15 said:
TWRP is not available for Android 11 yet, so you will have to wait.
Click to expand...
Click to collapse
At least I have root that's all that matters
pcould you please put the modified boot here?
RicoMartins said:
pcould you please put the modified boot here?
Click to expand...
Click to collapse
magisk.img
Shared with Dropbox
www.dropbox.com
Thanks, buddy.
You guys can flash a zip of twrp like orangefox dual boot. Right after the ota in twrp. With a pen drive to get twrp in OS11. No need to actually use a dualboot its just a really nice build I use it.
Anyone tried this method? https://www.droidwin.com/update-oneplus-to-android-11-oxygenos-11-via-twrp-without-losing-root/
Hey,
Yesterday i received the official global version of Ogygen OS 11 (OnePlus7Oxygen_14.E.35_OTA_0350_all_2103221233) for my Oneplus 7 which made me happy and i installed it on my current TWRP and root Ogygen OS 10. Afterwards my root and TWRP was gone. I read many threads now about that TWRP is not available currently for Android 11. So i was stuck with extracting the boot.img from the stock zip file and patching it with the latest canary Magisk (66e30a77 (22006)). The patch is successful.
After i flashed the boot.img to boot_a and boot_b via fastboot the phone restarted but there was still no root. (Magisk still showed that its not installed and superuser rights for Magisk also weren't granted->notification during start).
After trying and validating that i used the latest version of everything and also did a factory reset and tried the same handling again, i tried to use the latest beta Oxygen OS11 stock image for flashing the boot.img (same handling as before). After flashing i gained superuser rights and magisk was installed but no bluetooth and WIFI was working so there was an issue (is clear because it was not the same stock zip).
So does anyone of you might have already an solution for this?
Rgds,
Matthias
matthi383 said:
Hey,
Yesterday i received the official global version of Ogygen OS 11 (OnePlus7Oxygen_14.E.35_OTA_0350_all_2103221233) for my Oneplus 7 which made me happy and i installed it on my current TWRP and root Ogygen OS 10. Afterwards my root and TWRP was gone. I read many threads now about that TWRP is not available currently for Android 11. So i was stuck with extracting the boot.img from the stock zip file and patching it with the latest canary Magisk (66e30a77 (22006)). The patch is successful.
After i flashed the boot.img to boot_a and boot_b via fastboot the phone restarted but there was still no root. (Magisk still showed that its not installed and superuser rights for Magisk also weren't granted->notification during start).
After trying and validating that i used the latest version of everything and also did a factory reset and tried the same handling again, i tried to use the latest beta Oxygen OS11 stock image for flashing the boot.img (same handling as before). After flashing i gained superuser rights and magisk was installed but no bluetooth and WIFI was working so there was an issue (is clear because it was not the same stock zip).
So does anyone of you might have already an solution for this?
Rgds,
Matthias
Click to expand...
Click to collapse
Hello,
Did you see this thread right below yours?
Android 11 OB4
Just installed OB4, anybody got a boot.img file or magisk patched boot image file? Also any news on TWRP for Android 11? Thanks in anticipation OK I was just lazy hoping somebody Elese did the work. Ended up using my OB2 patched boot image file...
forum.xda-developers.com
Magisk canary can also cause a lot of issues. I'm using 22.0.
Hey thank you! I already saw this and tried it out before to get TWRP working as in the Oxygen OS 11 Beta but this TWRP version does not work with the official OOS11 for the Oneplus 7. It's strange that on Open Beta it works and now its not working.
Watching this thread because I'm stuck too. I either need locked bootloader or unlocked with Magisk
Does anyone already has a solution to this one?
I got the OTA today for 11.0.0.2, rooted fine with Magisk 22.1. Check out my guide:
https://forum.xda-developers.com/t/...m1900-android-11-oos-stable-11-0-0-2.4253743/
WareDat said:
I got the OTA today for 11.0.0.2, rooted fine with Magisk 22.1. Check out my guide:
https://forum.xda-developers.com/t/...m1900-android-11-oos-stable-11-0-0-2.4253743/
Click to expand...
Click to collapse
I wish someone would upload the fastboot ROM
Thank you man it worked ! i hope others are seeing also your intructions and files so they can use them and have root back again