[ROOT] [TWRP] MAX Boosted Sound Mixers V2 - Realme 5 Themes, Apps, and Mods

DESCRIPTION
Hey There Folks, I Assume We Often Think About Boosting The Volume Of Our Device More Than Original Configuration. Today I Present To You A Simple Yet Very Exciting MOD That's Boosts The Volume Of Our Device To A Great Extent. This Is Completely System Wide MOD, So It's Not Limited To Specific Apps.
ADVANTAGES
- MAX BOOSTED SPEAKER OTUPUT
- MAX BOOSTED EARPHONE/HEADPHONE OUTPUT
- MAX BOOSTED IN-CALL VOLUME (EAR SPEAKER, LOUD SPEAKER, HEADPHONES, BLUETOOTH)
- MAX BOOSTED USB AUDIO OUTPUT
- MAX BOOSTED ALL BLUETOOTH AUDIO OUTPUTS
- MAX BOOSTED ALL MICROPHONE INPUTS (IN-CALL, 3RD PARTY APPS, VIDEO RECORDING)
- ADJUSTED VOULME CONTROLS IN CO-ORDINATION WITH BOOSTED VOLUME
NOTES
- TESTED AND CONFRIMED TO BE WORKING ON REALME 5 RMX1911 REALME UI C.53
- ALSO SUPPORTS REALME 5/5i/5s
- SUPPORTS EVERY ROM WHICH USES REALME UI C.53 VENDOR OR HIGHER
- UNISTALLER WILL REPLACE MOD MIXERS WITH STOCK MIXERS
HOW TO INSTALL
- FOR V1, EXTRACT ATTACHED ZIP FOR INSTALLATION NOTES
- FOR V2, REBOOT TO ANY CUSTOM RECOVERY
- TAKE BACKUP (Just In Case)
- MOUNT VENDOR (Important)
- FLASH THE DOWNLOADED FILE
- WIPE CACHES, REBOOT ENJOY
HOW TO UNINSTALL
- REBOOT TO ANY CUSTOM RECOVERY
- FLASH UNISTALLER
- WIPE CACHES REBOOT
DISCLAIMER
I'M NOT RESPONSIBLE FOR ANYTHING. TRY THIS ON YOUR OWN RISK.
CREDITS
- Realme 5 Telegram Community
- Me
DOWNLOADS
V1
V2
UNISTALLER
XDA DevDB INFORMATION
MAX BOOSTED SOUND MIXERS
CREATED - 2020-08-06
LATEST RELEASE DATE - 2020-08-022
LAST UPDATED - 2020-08-22
ENJOY FOLKS

Ok

Related

Samsung S4 i9505 Super Tweaks (by _Bon_Bon & Shade5)

YOUR ONE STOP THREAD FOR ALL S4 I9505 ROM'S & TWEAKS​THE ULTIMATE BATTERY PROLONGING TWEAKS - MADE BY @SHADE5​THE OP ALWAYS HAS LATEST UPDATES - THANKS TO @_BON_BON​
Logo will be added back soon
LATEST ROM's & ESSENTIALS FOR I9505
1) AOSP 6.0 Marshmallow ROM by the JCD Team 14-03-2016
Optimized
2) Optimised CM 13 ROM built by the JDCTeam 25-05-2016
3) Resurrection ROM v5.6.8 built by @TJSteveMX 02-05-2016
4) Official TWRP Recovery v3.0.2-0 by the TeamWin 05-04-2016
5) GApp's of your choice (select ARM) (Updated daily!)
6) Dynamic Busybox Installer and updater script, by @_Bon_Bon
LATEST TWEAKS DOWNLOAD LINKS
1) Unofficial CM12.1 Alucard Kernel & sTweaks (flashable) 20-01-2016
All features may not work! This isn't officially supported on any other ROM than the OptimizedCM12.1!
2) Bon_Bon's "build.prop" tweaks 14-6-2015
3) Shade5's sTweaks Undervolt settings 14-6-2015
4) AntaresOne's Camera Crash Fix 19-6-2015
5) TrueStereo Mod by @FPSUsername (Also check his signature for a good balanced Alucard profile!)
6) XPOSED for Lollipop & Marshmallow (Official) by @Rovo89
LIST OF ALL GUIDES
1) How to make Any Rom Awesom-er RE-REVAMPED by @_Bon_Bon
2) S4 i9505 Undervolting Guide by @Shade5
3) AMOLED & Hardware tweaks Guide -by @Shade5
4) Camera tweaks guide - by @Shade5
5) Compilation of mods and useful scripts by @_Bon_Bon
6) sTweaks Kernel tweaking for everyday performance - by @Shade5
7) The_Thing I9505 PlugIn by @_Bon_Bon
8) Alucard's Kernel setting's by @Shade5
9) How to update your modem/bootloader by @_Bon_Bon
XDA:DevDB Information
S4 Awesome(er) SuperTweaks, Tool/Utility for the Samsung Galaxy S 4
Contributors
Shade5, _Bon_Bon
Version Information
Status: Stable
Created 2015-07-16
Last Updated 2016-06-01
This GUIDE is aimed at users who want to REDUCE HEATING/TEMPERATURE & get LONGER BATTERY LIFE on all versions of the RR ROM
(It wont affect your AnTuTu scores much & you will be able to use your phone for hours without your battery, phone or fingers burning up)​
NOTE: My tweaks are related to HARDWARE (CPU, GPU, IO & Screen) & not the software's power consumption​
PRINCIPLE OF TWEAKS: : [1] Undervolting the CPU - to draw less power & run cooler
All the below steps will only take about 5 minutes to complete (& another 5 minutes if you need to install the Kernel)
STEP 1 - Flash ALUCARD's Kernel V3.4.108 (if you haven't already done so) from here (Thank's to @_Bon_Bon for the latest Kernel & permission to use his work)
Boot into recovery & flash the Zip (just like you flashed your ROM) - you will not lose any data at all
__________________________________________________
STEP 2 (AUTO MODE)
If you wish to get ALL my Kernel Tweaks in ONE STEP simply download this file OR download the default.zip (you need to unzip it) attachment
Save it to the root of your INTERNAL MEMORY (see screenshot on where it should be - you may already have a file with the same name there - please delete it)
Now open sTweaks -> select the BACKUP OR RESTORE tab -> Press RESTORE NOW
Wait 30 seconds.....
Now REBOOT -> open STWEAKS -> CPU Voltage - click Check the CPU Voltage are same as below (to be sure the settings are active) :good:
ALTERNATIVELY:....... (Manual mode - so you are involved in what is happening )
Open the sTweaks app -> CPU Voltage Control & put ON the CPU VOLTAGE MAIN SWITCH
Now set voltages as below:
NOTE: (these are for a PVS2 & above chipset found in over 90% of i9505's)
IF you face any freezing+lines on screen (it is because of others tweaks/settings - please stick to just using my Kernel settings)
IF freezing still persists it means you have a PVS1 or PVS0 chip - simply add +25mV to each setting if that's the case
378 kHz 750000 uV
486 kHz 750000 uV
594 kHz 750000 uV
702 kHz 775000 uV
810 kHz 812500 uV
918 kHz 825000 uV
1026 kHz 850000 uV
1134 kHz 875000 uV
1242 kHz 887500 uV
1350 kHz 912500 uV
1458 kHz 950000 uV
1566 kHz 975000 uV
1674 kHz 1012500 uV
1782 kHz 1062500 uV
1890 kHz 1100000 uV
Now go to the GPU tab in sTweaks & put on the " GPU VOLTAGE MAIN SWITCH"
Set GPU voltages as below
Level 1 895000 uV
Level 2 1000000 uV
Level 3 1100000 uV
Now Click on the CPU page & ensure ENABLE ON BOOT (Load all settings on Boot) & below it press LOAD ALL
REBOOT -> open STWEAKS -> CPU Voltage - click Check CPU Voltage (to be sure your above voltage settings are active) :good:
DONE !
I've overworked my phone for >100 hours & done over 55 full CPU/GPU stress tests with multiple CPU & benchmark tools to give you these STABLE final results.
With Games + Downloads + Benchmarking + Other apps + CPU Monitoring was running the CPU reached just 62C (see it in the screenshot attached)
I also took 2 back-to-back comparative benchmarks using AnTuTu & got 27,000 (an overall drop of just 6% from the initial 29,000)
RAM performance increases (cooler & more efficient) while Runtime & 3D performance loses out a little but this won't affect you unless you are into hardcore gaming/too much multi-tasking (if so then please do not reduce the GPU voltages)
Do share your results & experience - Happy tweaking folks! :highfive: & don't forget to hit that THANKS:good: button
This guide is aimed at users who want to get LONGER BATTERY LIFE on all versions of the RR ROM
(It wont affect your AnTuTu scores & you will be able to use your phone for hours without your battery burning up)​
NOTE: This only tweaks the HARDWARE (CPU, Screen, Vibrator) & not the software's power consumption​
PRINCIPLE OF TWEAKS:
1) Exploiting the AMOLED screen - to display more black (pixels off) thus increase battery life
2) Adjusting simple accessible settings - to improve performance/battery
All the below steps will only take about 5 minutes to complete from you SETTINGS MENU
_____________________________________________
MOBILE NETWORKS -> Preferred 3G/2G (unless you really want 4G)
MORE -> NFC (Off)
CONFIGURATIONS -> MISCELLANEOUS -> Widgets/CLOCK widget Setting(increase update freq) , Vibrator Intensity (40%)
CONFIGURATIONS -> BUTTONS -> Navigation Bar Buttons (OFF if using Hardware keys)
CONFIGURATIONS-> HARDWARE KEYS (Enable if BUTTONS is OFF) -> Backlight (Enable for 1 second)
THEMES -> Install "Nicholas' Blacked Out" theme & Also "Pitch Black" wallpaper (from PLAY STORE)
DISPLAY -> Adaptive Brightness (ON) , Sleep (15s or 30s) , Daydream (OFF) , Ambient Display (ON)
SOUND & NOTIFICATION -> Other Sounds -> Touch Sounds (OFF), Vibrate on touch (OFF), Vibrate (OFF)
DEVELOPER OPTIONS -> Window Animation Scale (1 or OFF), Transition Animation Scale (1 or OFF), Animator duration scale (1 or OFF)
SUPER SU# -> Settings -> Enable Su during boot (ON)
DONE !!! :good::good:
Screenshot's attached!
Don't forget to hit THANKS if I helped. :good::fingers-crossed:
p.s : This also works on other ROM's where you have similar settings that you can toggle/edit
.
How to make Any Rom Awesome-er
RE-REVAMPED ​
INDEX:
1. Before ROM Install
2. After ROM Install
3. Recommended and useful Apps
4. Themes and personalization
All the download links can be found from the thread OP
A SAFE Odin version can be downloaded from this thread
Thanks to the developer!
1. Before ROM Install
Updating your Modem and Bootloader
I’ve already made a guide on how, why and where to download your Modem and bootloader files, so go check it out here
I’ve also made an up-to date thread with links to latest modems and bootloaders, here
Installing / Upgrading your recovery
Download and flash Official TWRP recovery 3.0.0
All TWRP recovery downloads for the JFLTEXX
Code:
[B] Features: [/B]
- It has touch screen support, for added convenience
- Works with all ROM installers
- Can be used to flash .zip and .img files
- Has added support for F2FS filesystems
- Has a beautiful UI
- It’s still being updated!
[B] How to install: [/B]
[B] If you already have TWRP v2.8.4 or higher installed: [/B]
1. Download and Unzip the TWRP-XXX-F2FS.tar.md5
2. Take out the recovery.img file and place it somewhere inside your phone
3. Boot into TWRP recovery
4. Go to Install -> Find and click the ‘Images...’ button
5. Browse to the image that you downloaded and select it
6. Choose recovery and swipe to flash
7. Done!
[B] If you have stock / other recovery installed: [/B]
1. Download Odin from the link above
2. Unzip the file you downloaded and open Odin3.exe
3. Power off your device completely
4. Turn on your device by pressing volume-up and the power buttons
5. Attach the device to your computer via a USB cable
6. Make sure Odin detects your device and click the AP button
7. Browse to and select the tar file that you downloaded and start the flash
8. Done!
Then boot into recovery if not already there
Converting / formatting filesystems to F2FS
Formatting filesystems as F2FS is suggested, if your ROM / Kernel supports it
This is done to improve speed and storage lifespan.
Code:
Filesystems that | Which
you can convert | Method
------------------------------------------------------
/cache | Format
/data | Format / Restore
/sdcard | Format
/system | Restore
/preload | Format
-------------------------------------------------------
EXT4 on /system is actually faster than F2FS, because it's a read only partition.
So, if you don't mess around with /system on a regular basis, converting it is not necessary.
Code:
[B] Converting filesystems through formatting: [/B]
1. Go to Wipe -> Advanced Wipe
2. Click the checkbox for the desired partition
3. Click Repair or Change File System
4. Now you can see the current filesystem format, if it’s already F2FS, can skip to step 6
5. Click ‘Change File System’ -> choose F2FS and swipe to change
6. Done!
[B] Converting filesystems through restoring a backup: [/B]
1. Go to Backup and choose the partition(s) you want to convert and back them up
2. Go to Wipe -> Advanced Wipe
3. Click the checkbox for the desired partition
4. Click Repair or Change File System
5. Now you can see the current filesystem format, if it’s already F2FS, can skip to step 10
6. Click ‘Change File System’ -> choose F2FS and swipe to change
7. Go to Settings and check: ”Use rm -rf instead of formatting”
8. Go to Restore and select the backup you made earlier
9. Restore the partition you converted to F2FS from that backup
10. Repeat above steps for all partitions you desire to convert / backed-up
11. Done!
Flash-able tweaks and mods
If you haven’t flashed your ROM and GAPPs yet, now is the time to do so
If the ROM doesn’t have a suggested GAPPs, choose Open GAPPs from the OP
List of MODs and tweaks you can Install:
Code:
1. [URL="http://forum.xda-developers.com/galaxy-s4/unified-development/mod-true-stereo-t3110740"]TrueStereo Mod[/URL], by @FPSUsername
2. [URL="http://forum.xda-developers.com/android/software-hacking/mod-thething-v0-2-3-t3169439"]The_Thing Mod[/URL], by me :P
3. Unofficial Alucard Kernel for CM12.1, by the JDCTeam and Alucard (Look in the OP)
4. [URL="http://forum.xda-developers.com/showthread.php?t=3034811"]XPOSED[/URL], by [user=4419114]@rovo89[/user] (Most ROM developers won’t support problems that you might encounter after installing XPOSED
5. [URL="http://forum.xda-developers.com/showpost.php?p=61892852&postcount=6"]Fstrim 3.0[/URL], from my compilation of MODs and useful scripts
6. [URL="http://forum.xda-developers.com/showpost.php?p=61892852&postcount=6"]SwaPa swap space Enabler / Disabler[/URL], from my compilation of MODs and useful scripts
7. [URL="http://forum.xda-developers.com/android/software-hacking/busybox-bonbon-s-busybox-t3253400"]Busybox builds[/URL], by me :P
8. [URL="http://forum.xda-developers.com/showthread.php?t=1916098"]MOAB, Adware, Malware, Spyware and Bloatware blocker[/URL], by @BSDgeek_Jake
Links for all of these can be also found in the OP
1. After ROM Install
Kernel and System tweaks
This section assumes that you have Alucard kernel installed, but some of the guides can be applied to systems without Alucards kernel.
You can get Official Alucard kernel from here
List of GUIDEs and Tweaks:
Code:
1. [URL="http://forum.xda-developers.com/showpost.php?p=61891946&postcount=2"]Undervolting guide[/URL], by [user=2062281]@Shade5[/user]
Through this guide, you can get some extra juice out of your phones
battery, without losing on performance too much
2. [URL="http://forum.xda-developers.com/showpost.php?p=61891964&postcount=3"]AMOLED & Hardware tweaks guide[/URL], by [user=2062281]@Shade5[/user]
A guide every S4 owner should follow, you can improve your battery life
by hours, without losing on performance [B] AT ALL [/B]
3. [URL="http://forum.xda-developers.com/showpost.php?p=61892305&postcount=5"]Camera tweaks guide[/URL], by [user=2062281]@Shade5[/user]
Do you have camera problems? No more! You can significantly decrease the
amount of frustration you have with you camera, by following this simple set of TIPs!
4. [URL="http://forum.xda-developers.com/showpost.php?p=61937937&postcount=24"]sTweaks Kernel tweaking for everyday performance[/URL], by [user=2062281]@Shade5[/user]
Tweaking the Android kernel is essential for achieving a better battery
life and performance. By following this guide, you can improve both easily!
5. [URL="http://forum.xda-developers.com/showpost.php?p=62285460&postcount=116"]Alucard's Kernel setting's[/URL], by [user=2062281]@Shade5[/user]
Oh you thought we were done tweaking the kernel? Here’s another guide on
tweaking the Android kernel, to squeeze to last little droplets of power out of your phone!
6. [URL="https://mega.nz/#!uotDxCTT!2y_-OPMbffdGBpX9V_P8TJKrbcpV9U8I09icCuvX4fQ"]_Bon_Bon’s build.prop tweaks[/URL] :P
Copy the text from this file and add them to the end of your /system/build.prop file, using a file manager. After you’re done, wipe /data/dalvik-cache and reboot your device.
([B][COLOR="Red"] ATTENTION This tweak is deprecated! Also: [/COLOR] If you flashed my The_Thing MOD, or have applied some other tweaks including build.prop, don’t use this file! [/B])
Additional tweaks
Some other small tweaks and tricks that aren’t that effective or aren’t suitable for the average user
You have been warned, some of the following TIPs aren’t suitable for everyone! So try them at your own risk!
Code:
1. Reducing resolution
Now, this boosts graphics performance A LOT, but can cause instability
You need a resolution changer app, I’d recommend NOMone Resolution
Changer from the Play Store
You have two choices, two thirds of the original resolution or three fourths
of the original resolution
(These two are the ones I chose, you can try out your own ones at your own risk)
Original
[ATTACH]3407082._xfImport[/ATTACH]
2/3
[ATTACH]3407084._xfImport[/ATTACH]
Width = 720, Height = 1280, LCD Density = 360 / 330
Gives more performance, difference is hard to see
[B] (Some games and apps might not be supported with this resolution, like Dead Trigger 2) [/B]
In addition, if you think that the icons are too large, you can go back and change LCD Density to 330
3/4
[ATTACH]3407083._xfImport[/ATTACH]
Width = 810, Height = 1440, LCD Density = 360
Gives performance, difference is impossible to see
3. Recommended and useful apps
sEFix, Entropy Tweaker
It’s a handy little app that changes Entropy generation threshold. Increasing Entropy generation threshold can reduce slowdowns while using apps that rely on randomly generated numbers.
Code:
1. Download the app from the Play Store, [URL="https://play.google.com/store/apps/details?id=com.zdvdev.sef"]here[/URL]
2. Open the app and move the slider, so the threshold shows 1024
3. Done!
Greenify, App Hibernator
Now then, we’ve all heard about the battery and performance boosting app, known as Greenify
It needs no introduction and no explanation, just go check out its XDA thread and enjoy your new found power!
Amplify, WakeLock stopper
Using this app you can prevent and customize what Wakelocks are allowed to happen and how often. It’s a handy app and worth your time, so go check out its website!
Power Nap For XPOSED
Yet another Wakelock blocker. This app lets you choose what applications that are allowed to cause Wakelocks and it blocks all others. Go check out its XDA thread!
4. Themes and personalization
This is why Android, for me anyways, it’s the best OS for your phone out there.
Customizations! Themes! Boot Animations! Endless possibilities!
So I challenge you, to tell us your favourite themes and layouts and leave links from where to find them! Some of them will be given a place in this guide!
3mel said:
as requested, my favourite theme MATERIAL GLASS by Pitched Apps
most themes I try have one tiny aspect like toggle colours and notifications tray that bug me. this theme I like on every screen, nice clean dark and simple...
compatible with layers manager RRO and CM 12.1 theme manager
http://play.google.com/store/apps/details?id=com.pitchedapps.material.glass.free
Click to expand...
Click to collapse
And that’s all, hope I helped! :3
Thanks to:
@AntaresOne
@alucard_24
@rovo89
@Shade5
@waylaidwanderer
@oasisfeng
@3mel
CAMERA HACKS & MODS​
If you face a Camera bug on any Lollipop ROM where hardware interface crashes after shooting some photos/videos & it says "UNABLE/IMPOSSIBLE TO CONNECT TO CAMERA".
just reboot into recovery & flash this file
Your camera will NEVER crash again!!!! Credits to @AntaresOne
Samsung's Camera drivers are closed-source (locked) so custom ROM developers are not able to extract the full potential of the hardware (eg HDR & manual camera settings such as focal length etc.)
No Camera app can fix that issue - however I would recommend you use any of these Camera applications:
1)"OpenCamera" from Play store
2) Google Camera (preinstalled) for normal & panorama shots.
3) CM12 modded CameraNext v22 from this link
"CM Camera" is nice but again due to driver limitations it's features get limited & also Panorama sometimes crashes!
MODS/ZIPS
Here you'll find all my handy little mods and explanations what they do
I do accept request, just don't ask me to build an AI ;D
These mods require the latest busybox and init.d support!
Busybox
Don't have Busybox, or you don't like your current build? Then try mine!
It comes in 3 different builds to be used in different situations and is definitely worth your time
Now also includes a dynamic installer script! It can be used to install and update the build, so you only have to download the installer once!
SwaPa
Using this script the user can create a swap space into cache, from 50mb to 150mb.
Most users don't need it, as it's only useful if you're doing some serious multitasking or benchmarking.
When android runs out of physical memory (that rarely happens on our phone) it normally starts to kill any inactive background processes, but first gives them a chance to persist their progress (Caching or writing it down to /data) With swap, android moves the process to a swap file and retrieves it when it's needed again, so it acts like a slower version of RAM.
It also has the ability to remove all swap spaces, including Zram.
Zram is bad on a phone with a lot of physical ram (like ours) so it can be disabled. You can read more about it here.
Fstrim 3.0
When android deletes files it just writes 0 to the block where it was. This means that when android wants to rewrite to that block, it first has to completely empty it and this decreases performance. And someone could potentially recover the data that was on that block, possibly stealing personal information. So this script every 5 hours "trims" (clears blocks considered empty) /data, /system, /preload and /cache, prolonging your phones storage lifetime and improving performance. And it creates a log file to /data so you can see how much was "trimmed" You can read more about it here.
New feature! Cache dumping! Android caches apps for faster start-up and usage, but on some ROMs/Kernels this can cause lag after few days, or even few hours! Now this script dumps the cached ram for an instant speed boost!​
Reserved
WAKELOCK hacks coming soon....
Tagging below users to come follow us here
@_Bon_Bon @droidblitz
@fra9090
@henry1550
@peppect91
@nickmax1
@Corduroysack
@HorkayZolee
@Sincerity1993
@mmatic10
| Under construction |
​
Thanks
Shade5 said:
THE OP IS OWNED & OPERATED BY TWEAK GURU _BON_BON
Below posts will be updated by Shade5​
LATEST RR ROM FOR I9505
Here build by @akhilnarang
Created 2015-07-16
Last Updated 2015-07-16
Click to expand...
Click to collapse
Many thanks for doing this, makes things much easier to find and keep up to date now, a great help.
Sorry... misclicked
Will my s4 charge faster if i set the charging to 1900mA in the kernel?
Because i have a 4port usb charging port with an output of 3amps i believe.
Sent from my Resurrection-Remix \m/ I9505 \m/
droidblitz said:
Will my s4 charge faster if i set the charging to 1900mA in the kernel?
Because i have a 4port usb charging port with an output of 3amps i believe.
Sent from my Resurrection-Remix \m/ I9505 \m/
Click to expand...
Click to collapse
@droidblitz you must keep the sTweaks settings for AC Charging at 1900mA in the Kernel & USB at 460mA
Only if you have a charger 1.9A charger only will it charge super-fast to full capacity - BUT it will also heat up the circuits & it's not advisable to use the phone at such times.
P.S - I don't have the original charger (nor do I have the original battery) so I use a 1A charger to fill the battery & it does the job in a few hours (around 4-5 hrs I guess) and it doesnt heat the battery or circuits much (which means my battery will last me much much longer)
Shade5 said:
@droidblitz you must keep the sTweaks settings for AC Charging at 1900mA in the Kernel & USB at 460mA
Only if you have a charger 1.9A charger only will it charge super-fast to full capacity - BUT it will also heat up the circuits & it's not advisable to use the phone at such times.
P.S - I don't have the original charger (nor do I have the original battery) so I use a 1A charger to fill the battery & it does the job in a few hours (around 4-5 hrs I guess) and it doesnt heat the battery or circuits much (which means my battery will last me much much longer)
Click to expand...
Click to collapse
Ohh i thought it was not really working.
Gonna try it with 1900mA besides im putting my phone on top of a laptop cooler when its charging. To keep it cool while playing.
Sent from my Resurrection-Remix \m/ I9505 \m/
Excellent move making your own thread, it will be a lot easier to find stuff now @bon_bon @Shade5
Thanks @Corduroysack . Hope this makes a lot of people happy... Another guide will be posted by me today
I'm away for the weekend so will check back on Sunday night ?
Alucard kernel works on GPE ?
fra9090 said:
Alucard kernel works on GPE ?
Click to expand...
Click to collapse
No, it's for cm12.1 :/
Hope I helped :3
After I flash the Alucard Kernel, I go to STweaks to load the profile but it says no kernel support?
I had that, but if I went back to it after 30 seconds or so it showed all the settings. Check SELinux is set to permissive as well.

[MOD][APPS]Sound setup for Galaxy S Duos GT-S7562 with PAC 4.4.4 RC-3 ROM

I would like to share to you a sound setup that would improve the sound quality of your device to your preferences. This is a bunch of guides I searched in XDA forums and tested them with my PAC-ROM KK RC-3 setup. Though it is a software-level modification, I found the end result quite pleasing.
Disclaimer:
I am not responsible for any damage that this may cause you. As a golden rule, make sure you to run a full backup of your current setup in case something goes wrong with the process. I have only tested this in my device (model: S7562). Do follow the instructions extensively.
Pre-requisite:
~An android 4.4.4 Custom ROM
~Latest TWRP custom recovery built
~With root and Busybox installed
Instructions:
1.) Download and flash the 4.4.x Viper4android driver found here.
2.) Run this current Viper4android app. That should prompt a driver installation dialog box. Proceed installing it and choose what ever mode.
3.) Download and install the latest Viper4android apk. (currently using 2.5.0.5).
4.) Run this latest Viper4android app in order to update the driver to the latest.
5.) You can now disable the old Viper4android app (the one with the violet icon).
6.) Setup the Viper4android the way you like it, and also use a music player that integrates an equalizer (like Phonography or Spotify) and your good to go.
Current headset profile (got it from this):
Master power - on
Playback gain control - off
FET compressor - off
Viper DDC - on, set to sennheiser hd558
Spectrum extension - on, set to 1.0
Firequalizer - off
Convolver - on, set to Samsung soundalive tubeamp(included in the IRS samples)
Differential surround, field surround, headphone surround+, reverberation - all set to off
Dynamic system - off
Viper bass - off
Viper clarity - off
Tube sound simulator - off
AnalogX - on, set to extreme
Rest all are turned off or kept the default.
Links:
Viper4android driver: https://forum.xda-developers.com/oneplus-one/themes-apps/app-viper4android-v2-3-4-0-t3040014
Latest Viper4android apk: https://forum.xda-developers.com/showthread.php?t=2191223
IRS Samples: https://forum.xda-developers.com/attachment.php?attachmentid=4133893&d=1493617480
Thanks to @ScreaMySkrillEX , @gianton , @pavlepiramida, @zhuhang
RRR
Really appreciate the credits!
Thanks.....
ScreaMySkrillEX

[ROM][MorfuZ V4.0][GT] EMUI 8.0 Kangvip P8 Lite 2017 by Catuva21

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V 4.0 - EMUI 8.0 KANGVIP KANGVIP P10.361GT​DONOT COPY MY WORK, Ask for Permissions
Code:
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
with all versions, HUAWEI P8-P9LITE 2017 - HONOR 8 LITE, remember to know your original compilation if at any time you want to return to stock for example PRA-LX3C25 with this data you can return to stock.
This version is based on the official EMUI modification made in the SIRIUZ rom combined with the work of Kangvip KangV & Team HRT for their best KangVIP framework, an Asian rom which was adapted for all European and Latin American versions.
REQUIREMENTS:
- EMUI 8.0.0
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
Guard the rom in an external memory.
Turn off the cell phone press the plus and power buttons until you have the TWRP window
Press WIPE
Press FORMAT DATA
Write the word "yes" without quotes and accept, just do the work
Press BACK to go back several times to the main window.
Press WIPE, then ADVANCE WIPE
Verify that the partition DATA this in the f2fs extension
Mark: Dalvik, cache, data, internal storage, system
IMPORTANT !: do not mark "micro sdcard".
Once you have marked, slide the "swipe to wipe" arrow to clear it.
Go back to the main sale, press INSTALL
Press SELECT STORAGE
Switch to Micro SDCard to find the rom.
Look for the MORFUZ rom and flash
At the end of the installation press "wipe davilk-cache", wait for it to finish.
Reboot system.
Congratulations now will start the rom MORFUZ
now compatible with magisk, if you want to have a magisk root, wait for the system to start normally, then download and flash the Kernel-Ramdisk.zip file by recovery twrp after starting, delete the supersu application.
https://mega.nz/#!FrBHBKLS!ZXG9eiywUBEXBOX3zqFtrRMMhlmGWcMzXmAAlLBN2fo
It seems that Huawei modified the modem partition in the September-October patch and the MORFUZ kernel does not work incoming and outgoing calls.
-IMPORTANTonly install this module from the root Magisk options if incoming and outgoing calls do not work.
https://mega.nz/#!pjoRxAyD!wzY-jx5VJErSUO8rz-0hsL-xOHLMj5Ch9wEx75dIZyo
Rom Morfuz
https://mega.nz/#!c3gVVJZS!XgiD0urvJrUiu9BnMIzV6_LtsFihyC-v_4Tq4h-vulE
TWRP Mod by catuva21 - VERSION 2
unzip, the file is automatic
https://mega.nz/#!uD4FlCqL!ERBzP4ZWa2sR8f_wnn15F_cOFCdYVKgfYETjiehQkkQ
TELEGRAM GROUP
https://t.me/joinchat/ERAhfQ8kyF6_iH5nMun5dg
Contributors:
CATUVA21
Credits:
- Openkirin Recovery TWRP
- KangV & Team HRT for their best KangVIP framework
- Alexxx1
- Chisetdel31260
ROM OS Version: PRA-LX
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-01
Last Updated on: 2018-09-23
ROM MORFUZ 4.0 EMUI 8.0 - KANGVIP​
ROM MORFUZ 4.0 EMUI 8.0
https://mega.nz/#!c3gVVJZS!XgiD0urvJrUiu9BnMIzV6_LtsFihyC-v_4Tq4h-vulE
Do not install Xposed from kangvip = do not reboot the system, you will reinstall the rom
now compatible with magisk
if you wish to have magisk root, wait for the system to start normally, then download and flash the Kernel-Ramdisk.zip file after starting, delete the supersu application.
https://mega.nz/#!FrBHBKLS!ZXG9eiywUBEXBOX3zqFtrRMMhlmGWcMzXmAAlLBN2fo
Modulo_modem
the kernel morfuz works very well before the update of the TURBO GPU, after the update is failing incoming and outgoing calls, I created this module for root magisk (17.1) and the kermel MORFUZ WORKS very well
OBSERVATION: only use if incoming and outgoing calls do not work.
do not copy this module, you can publish in other modified kernel with the respective credits
https://mega.nz/#!pjoRxAyD!wzY-jx5VJErSUO8rz-0hsL-xOHLMj5Ch9wEx75dIZyo
thank Emrullah bingul
TWRP Mod by catuva21 - VERSION 2
unzip, the file is automatic
https://mega.nz/#!3qAVBCoD!PbIdHuvLRi6LhqZ1meH49SzmNvH8Ks6Pbk1yeLC7fgI
ROM SIRIUZ 3.0 (not kangvip)
https://mega.nz/#!tigViDhL!9Jpo-0XqvPDnDbvRtl0ja7DqUN6vYettcJKm4LIg6Uc
TELEGRAM GROUP new telegram group
DESCRIPTION ROM MORFUZ - KANGVIP​DETAILS OF THE ROM
ROM MORFUZ 4.0
- New kangvip base P10.361GT.
- P8 lite base firmware (security patch for September) .
- Huawei ID integrated and running .
- New bootanimation without sound .
- New bootlogo .
- Percentage activated from start, for other models .
- Activated the font change in themes .
- New topics .
- 7 themes to customize font .
- Camera corrections .
- Slow camera running .
- Youtube advance updated .
- Adaway ad blocker .
- VolTe Activated .
- Dual speaker sound now in Option to choose.
- Kernel Morfuz 5.0 EAS .
- permissive selinux without magisk modules .
- upstream 129 + .
- Magisk 17.2.
ROM MORFUZ 3.4
- P8 lite base firmware (August security patch).
- New kangvip base P10.358.
- MorfuzKernel 2.1 selinux Permissive.
- Added Turbo GPU, extracted from huawei P20 lite and Honor 9 lite.
- Added support init.d.
- Added busybox.
- Huawei ID back.
- Boot profile for the Darknnes-Blu_Active kernel within init.d improves performance.
- Change of the MTweaks auditor kernel application.
- Added Lent AR fun camera function.
- Magisk 16.0.
- Increase bitrate of photos and video, improve quality.
- Application of return mail.
- Youtube Mod Updated.
- Screenshot by sliding three fingers.
- New Gboard keyboard.
ROM MORFUZ 3.4
-Base firmware P8 lite 2017(security patch June).
-New kangvip base P10.355.
-Activated Dual Speaker.
-Added DolbyAtmos in Music.
-New Boot logo.
-Added Camera Raw
-Lent AR
-Added custom watermark for the P8 lite.
-Now without patches.
-Installation mode AROMA-INSTALLER.
-Music: stock or crack.
-Camera: stock, Mate10Pro or P20Pro.
-Root: Supersu.
-Navbar, Use the fingerprint sensor as a navigation bar.
-Solid explorer, Kernel Auditor, Quick Reboot.
-MxPlayer.
-Sony Music.
ROM MORFUZ 3
- is based on the last update of PRA-LX1C432B321-log (8.0.0.321) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications
CATUVA21 said:
RESERVET2
Click to expand...
Click to collapse
Hi bro
your work is great
just had a question
do you have the problem that phone doesn't boot after flashing moded system.img??
because i tried it alot but same issue
honorfan said:
Hi bro
your work is great
just had a question
do you have the problem that phone doesn't boot after flashing moded system.img??
because i tried it alot but same issue
Click to expand...
Click to collapse
Thank you for the good job you did. the system (kangvip) has given me problems, try other versions and it is only the only version I found, also so you can start normal without flashing recovery stock you must make a change in vendor.img
Hello brother, very good work, just something, the quality of the interior photographs goes down a lot .
Hey @CATUVA21 Nice work with the rom!
Just saying, I have some problems related to pairing bluetooth devices.
Any ways to fix this problem? Overall the rom is just awesome <3
Good morning,
@CATUVA21 a huge thanks for your TWRP, perfect and beautiful on PRA-LX1C432.B322
Nice day
Thank you for the ROM, good work, everything seems to work fine. Also Histen sound effects are good too ( although not as good as v4a :/ )
CATUVA21 said:
ROM MORFUZ V 3.0 - EMUI 8.0 KANGVIP
HUAWEI P8-P9LITE 2017 -- HONOR 8 LITE
KANGVIP P10.342-V3
DONOT COPY MY WORK, Ask for Permissions
COMPATIBLE WITH
PRA-AL00C00---PRA-TL10C00---PRA-AL00X---PRA-L03C69---PRA-L21H---PRA-LA1C10
PRA-LA1C185---PRA-LA1C900---PRA-LX1C02---PRA-LX1C40---PRA-LX1C55
PRA-LX1C109---PRA-LX1C113---PRA-LX1C432---PRA-LX1C464---PRA-LX1C530
PRA-LX1C738---PRA-LX1ITA---PRA-LX2C185---PRA-LX2C569---PRA-LX2C635
PRA-LX2C636---PRA-LX3C25---PRA-LX3C45---PRA-LX3C521---PRA-LX3C605-PRA-TL10
REQUIREMENTS:
- be in EMUI 8.0.0 P8/P9LITE 2017 -- HONOR 8 Lite
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
DETAILS OF THE ROM
- is based on the last update of PRA-LX1C432B321-log (8.0.0.321) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications
INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- Press FORMAT DATA
- Write the word "yes" without quotes and accept, just do the work
- Press BACK to go back several times to the main window.
- Press WIPE, then ADVANCE WIPE
- verify that the partition DATA this in the f2fs extension
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the MORFUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ
Contributors:
CATUVA21
xavi R. Torres(Honor 8 lite) (TESTER)
Openkirin Recovery TWRP
ROM OS Version: PRA-LX1C432B321-log (8.0.0.321)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-01
Last Updated on: 2018-05-01
Images
Click to expand...
Click to collapse
is the camera same as stock?
Is a restart of the phone required to apply the changes to CPU/GPU?
Took me a few tried to get it working, but definitely worth it. It's a really good ROM, that I'll be using as my primary now.
Niko99ITA said:
Hey @CATUVA21 Nice work with the rom!
Just saying, I have some problems related to pairing bluetooth devices.
Any ways to fix this problem? Overall the rom is just awesome <3
Click to expand...
Click to collapse
I keep working on it
player98343 said:
is the camera same as stock?
Click to expand...
Click to collapse
yes
CATUVA21 said:
ROM MORFUZ V 3.0 - EMUI 8.0 KANGVIP​HUAWEI P8-P9LITE 2017 -- HONOR 8 LITE​KANGVIP P10.342-V3​DONOT COPY MY WORK, Ask for Permissions
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
PRA-AL00C00---PRA-TL10C00---PRA-AL00X---PRA-L03C69---PRA-L21H---PRA-LA1C10
PRA-LA1C185---PRA-LA1C900---PRA-LX1C02---PRA-LX1C40---PRA-LX1C55
PRA-LX1C109---PRA-LX1C113---PRA-LX1C432---PRA-LX1C464---PRA-LX1C530
PRA-LX1C738---PRA-LX1ITA---PRA-LX2C185---PRA-LX2C569---PRA-LX2C635
PRA-LX2C636---PRA-LX3C25---PRA-LX3C45---PRA-LX3C521---PRA-LX3C605-PRA-TL10
REQUIREMENTS:
- be in EMUI 8.0.0 P8/P9LITE 2017 -- HONOR 8 Lite
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
DETAILS OF THE ROM
- is based on the last update of PRA-LX1C432B321-log (8.0.0.321) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications
INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- Press FORMAT DATA
- Write the word "yes" without quotes and accept, just do the work
- Press BACK to go back several times to the main window.
- Press WIPE, then ADVANCE WIPE
- verify that the partition DATA this in the f2fs extension
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the MORFUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ
Contributors:
CATUVA21
xavi R. Torres(Honor 8 lite) (TESTER)
Openkirin Recovery TWRP
ROM OS Version: PRA-LX1C432B321-log (8.0.0.321)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-01
Last Updated on: 2018-05-01
Images
Click to expand...
Click to collapse
Hello i'm need K Settings or Kangvip framework, can you share please?
Thanks for this rom, works like a charm on p9 lite 2017. I spend around 5 hours to install, but it deserve!
LE: some screenshots
tzutzus said:
Thanks for this rom, works like a charm on p9 lite 2017. I spend around 5 hours to install, but it deserve!
LE: some screenshots
Click to expand...
Click to collapse
I'm sended a message on private message.
i don't have any PMs
I'm on Resurrection Remix (Treble ROM) on P8 Lite 2017.
Do I have to do something different to install it? Or shall I just follow the instructions on the OP?
Can't change theme honor 8 lite pra-la1

[EXYNOS][UNOFFICIAL] Resurrection Remix Q V8.7.3 04/30/2022

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
--> ROM is stable for daily-usage. <--
--> Only the N910C version is tested by me. <--
--> All Exynos models support full functionality (Sim , calls etc) <--
--> For Stable Camera (Photo/Video) Use this GoogleCamera or XDA Thanks @Kaper_20 and enable camera2Api <--
--> RR-Q DOES NOT support dualboot patcher! <--
--> The kernel is fully customizable using HKTweaks by corsicanu: Github <--
--> Personal Notes <--
Release notes :
RR builds are now in sync with latest lineage 04/30/2022 release, RR builds include FaceUnlock and system info overlay
I have also moved to releasing everything on sourceForge, and ive made Bootloader / modem update packages for those who need it, Head over to WiKi for instructions
20220421 Lineage Release notes :
Hey everyone! Glad to be back again for another release, This one has been in development for couple months now, and comes with massive upgrades and improvements, the most major is a full transition into Exynos7420 Oreo graphics drivers, which modernizes our device graphics stack significantly, and finally allows us to use proper OMX media codecs which solves many issues including the dreaded low quality playback! (You no longer need to flash FakeDeviceInfo)
Further more the new GPU driver significantly boosts performance in games and UI which is always a welcome (including fixing graphical glitches in games)
Other major fixes include full encryption support, Please refer to Updated TWRP to perform first time encryption setup, i must warn however, Encryption might interfere with future rom flashes, so only use it if you can keep your data backed up, as it will fully deny you access to it from TWRP.
This release also includes fixes for the random reboots, and Audio leakage, sadly this does not address the tiny microphone quality, so that remains an issue, Please refer to bugs for an uptodate bug list and instructions on how to easily report new issues
Big thanks to @ISoreo and @TrisTanster for a ton of help with testing
If you appreciate the effort behind this, don't hesitate to leave a thanks, provide constructive criticism and maybe consider donating some "totally not illegal stuff" over at my paypal
Submitting new issues/Requests
--> First read existing issues and the F.A.Q Below to ensure its not a duplicate/workaround <--
--> Head over to universal5433 for logging and issue reporting guide <--
--> provide as much info as possible and upload your logs on the forum <--
--> Footej and This GoogleCamera or Custom Opencamera XDA can record videos only <--
--> Kernel is Permissive <--
--> Microphone quality outside of calls is weak <--
--> Issues Page <--
Documentation
- Our project is also at SourceForge
TWRP
- My builds (3.5.9) WIth encryption support - XDA
-> Additional <-
ROOT Method
Magisk
- Simple follow Install instructions , Make sure to enable Magisk Hide to restore SafetyNet functionality
- i recommend Magisk V23 + Magisk hide for most usage
Google Apps
Open GApps
- Pick ARM > Android 10. No MicroG support currently
or
BiTGApps
- Pick ARM Package
Odin
- Odin3 v3.13.3
Heimdall
- Glass Echidna
Bootloader/Modem
- Latest Packages here
Sources
Resurrection Remix Source
Exynos5433 Source
Credits
@bonuzzz for his work in los-15.1 and exynos5433 Tablets and @dl12345 for his los-14.1 contributions
@Stricted for help throughout this project, and porting modern BSP for exynos5xxx
@Alastor89 for help with custom powerHAL and contributions from Galaxy S7
@ripee & @tripLr for contributions to maintain the trees and build server
@RaymanFX & @erickwill for their work in maintaining this device on CyanogenMod 13.0
@lineage project and all team members.
If you helped with this project and I forgot to add you, please PM or mention below.
Testers
@Fuadmoin for extensive N910S/L/K Testing
@ISoreo for extensive N910C Testing
ck on telegram for N910U testing
@Voytec83 @claude96 @Enginyaman @MrNova @podiwadda @muddii_yasser @Mohelsayedplus @SypeR_ @exalented @Seemanthinis @clewisit
t
-> RR Team <-
XDA Developers
Phhusson for Treble trees
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users​XDA:DevDB Information
Resurrection Remix Q, ROM for the Samsung Galaxy Note 4
Contributors
ananjaser1211
Source Code: https://github.com/universal54335433/
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest Bootloader/Modem and TWRP
Based On: AOSP RR-Q
Version Information
Status: Stable
Stable Release Date: 2022-04-30
Created 2019-10-11
Last Updated 2022-05-01
Downloads and changelogs
Track changes on RefinedChannel : Telegram
Come hang with us on our chat : Telegram
My TWRP (3.5.9) For all Galaxy Note 4 Exynos Variants With Encryption : XDA
--> Downloads <--
Resurrection Remix Q v8.7.3 (04/30/2022 - STABLE)
N910C/H (treltexx) MD5 : 533d759dd2dd7dbe8e8768947b1ae699
N910S/L/K (trelteskt) MD5 833e67df2d3143ae65051d394be0bc3c
N915SLK (tbelteskt) MD5 : 92e6a946f5d06c9a3714ae152e8ab3d0
N916SLK (tre3calteskt) MD5 : 1d2a660d0a33d6891ce84eca71b68a9c
N910U (trhpltexx) MD5 : b3ca4cf4e424b746e302ada4221c8c00
SourceForge : Download
Old Builds (Only on AFH)
Resurrection Remix Q v8.7.0 (6/30/2021 - STABLE)
N910C/H (treltexx) : AFH | MD5 : 729b7000fc8e96d7fadfac49add853c9
N910S/L/K (trelteskt) : AFH | MD5 : 6b904260f77e67eb93d35221de6eef5b
N915SLK (tbelteskt) : AFH | MD5 : 7c96a1a7d695a10be271a95feac13355
N916SLK (tre3calteskt) : AFH | MD5 : f511947031c692ece1b1f360584c1ff7
N910U (trhpltexx) : AFH | MD5 : 27e2fe1346cd9ae450c1d55559a13b37
Google Drive mirror : Download
FakeDeviceInfo v2 : GDrive | AFH (Read more about it in F.A.Q)
->> Resurrection Remix Pie builds (10/19/2019) [LATEST]
N910C/H (treltexx) : AFH | MD5 : 47d28aab6df51628e6b09f6bbf243f67
N910S/L/K (trelteskt) : AFH | MD5 : 7814250d8a7efb6cfd81a81a7ef15b60
N915SLK (tbelteskt) : AFH | MD5 : 36878ec58ee4dedf85376f712d9c5f6f
N916SLK (tre3calteskt) : AFH | MD5 : e536e02efb45873a351fc5dec8d1f372
GoogleDrive mirror and test folder : Drive
->> Resurrection Remix Pie builds (11/10/2019) [LATEST]
N910C/H (treltexx) : AFH | MD5 : 42e7f3ddf8fd0a148bc8c55595791ca3
N910S/L/K (trelteskt) : AFH | MD5 : cfb14fb04ad7564bc184e795195d3d86
N915SLK (tbelteskt) : AFH | MD5 : fc58f1e8bdf981439aa5108d12b71384
N916SLK (tre3calteskt) : AFH | MD5 : 2c534cc6c9042673a987b04c051a68d2
GoogleDrive mirror and test folder : Drive
--> Changelog <--
Resurrection Remix Q v8.7.3 (04/30/2022 - STABLE)
- Include VR Support Pacakges
- Fix bootloop caused by encryption
- Resync latest RR Source
- Include FaceUnlock support
- Include System Information Overlay support
Resurrection Remix Q v8.7.3 (04/21/2022 - STABLE)
* This is a cumulative release of the past couple months
- Fix interactive governor performance issues
- build missing OMX hidl
- update media configs to fix some playback issues
- Switch to N935FXXS7CTJ2 OMX to fix video recording (screen record/footej)
- Increase min cpu clock to 700mhz
- restore stock little cpu boosting frequency
- Revert Agressive hotplug power saving mods
- Fix bluetooth audio suttering when screen is off
- Switch to Exynos7420 Oreo R22P0 GPU
- Update Gralloc to oreo buffer
- Patch camera to work with new gralloc
- Fix AdaptivePlayback low quality issues
- add 4K camera recording profile (ofc wont work)
- re-do media configs and bunch of other **** for oreo graphics
- update power_profiles to use proper power values
- Fix Power management in PowerProfile switcher (Balanced / Powersaving and performance now properly apply)
- Add custom audioroute which fixes various Audio issues (leakout in headphone jack, some echo, other audio route issues)
- Enable AOSP dynamic audio processing
- Reserve 128MB of internal storage for critical system operations (to avoid losing data when internal is full)
- Fix parse errors in media configs
- Fix MFC dec/enc permissions
- Improve RIL mobile data stability / latching onto network
- Remove unused things such as DRK, F2FS and deprecated camera configs
- Add Encryption support (Follow F.A.Q For how to get encrypted)
- Add 2017 August Vendor patch level
- Fix USB MIDI mode crash
- Remove unsupported audio sampling rates to avoid extra processing
- Fix WiFI Direct / P2P
- Significantly reduce Drain caused by broken P2P
- Add back GPS NTP server configs
- Fix-up and update XTRA configs for GPS
- Remove unsupported software decoders
- Revert broken audio processing in the lineage audio HAL
- Fix random reboots caused by invalid GNSS/GPS config
- Disable legacy hardware keystore
- Switch from proprietary keystore/tee to OSS for future support
- Various fixes to USB / MTP
- Add a fix for WiFi turning off after doze
- And a bunch of other minor things here and there in the device trees
Kernel :-
- Fully re-do USB upstream to fix weird issues with MTP
- Fix FBE Encryption
- Switch to OSS Mobicore driver
- Remove default Boeffla block list as it broke WiFi and other parts
- Update interactive governor
- Disable broken/unused governors
Old releases changelogs
Lineage 17.1 Update (6/30/2021 - STABLE)
- Sync GPS headers with exynos5420
- add patch for our old gps hal
- remove custom LMK stuff
- add ZRAM configs
- cleanup LMK
- add binary to detect device and set 3g/4g and proper codename/fingerprint
- support devices with engineering bootloader
- Remove problematic old commits from kernel
- re-do memfd and sdcardfs updates for Q
- backport zpool/zbud/zsmalloc and zRAM drivers
- Disable ZSWAP, and samsung swap (vnswap)
- Enable 1.5GB LZ4 ZRAM
- add proper LMK driver
- improve powerHAL frequency changing
- Downgrade sdfat driver to 2.0.6 to fix random reboots
- Add FreeForm multiwindow lineage patches
Lineage 17.1 N910U Update (3/08/2021 - STABLE)
- Fix simcard recognition
- Fix mobile data
- Fix voice call verbs and scenarios
- Now fully functional Sim calls, 3rd party calls, SMS and mobile data
Lineage 17.1 (3/04/2021 - STABLE)
- Fix modem startup on N910C/H/U that caused random reboots and sim issues overtime
- improve modem stability and fix a bug that caused the phone to panic if you unlock it fast after boot
- Enable Full screen gestures (See F.A.Q for how to enable)
- Replace custom fingerprint service with stock AOSP one
- Disable camera debugging and custom params that cause issues
- Rework media profiles to improve camera video quality in gcam
- Fix media performance issues to fix playback issues (Read F.A.Q for quality fix for instagram)
- Remove buggy AptXHD bluetooth codec and keep Aptx only
- Rework DRM service for full L1 support (No secure L1 playback yet)
- Disable absolute volume to fix bluetooth audio issues
- Add Wifi/Gps wakelock group to prevent issues on long uptimes
- More fixes to disable buggy P2P/WiFi Direct spam
- use low-end video profiles for smoother playback in some apps
- Add back and fix missing NFC
- Massive Audio rework to fix issues listed below :-
- Fix calls on earpiece, speaker, bluetooth and headphones for C/H/S/L/K
- Fix microphone issues on speaker calls
- Fix microphone issues on video calls
- Fix bluetooth call issues on all models
- Fix an issue that caused headphone volume to leak from speaker
- Fix an issue that caused earpiece to work when doing bluetooth calls
- Add custom workaround to fix no incall volume and other audio routing when you boot muted
Lineage 17.1 (2/17/2021)
- set default gpu clock to 600mhz to fix instability
- add FB notifier for power hal
- reduce mobicore logging
- fix HMP up/down tune to fix performance issues
- disable P2P Spam
- add support for lineage/twrp recoveries in the device tree
- add odex optimizations
- let aosp only compile the needed resources for our DPI
- add RAM pinner and pin SystemUI, graphics and runtime to RAM
- organize ramdisk into vendor
- add FastCharging hidl to turn on / off fast charging in settings
- add improved SQLITE overlays for app database optimization
- add custom max_volume warning for headphones
- remove guard that made flipflap (sview) not compile on korean variants
- build custom powerHAL
- add stock interactive profiles in powerHAL (balanced, performance and power saving)
- let the powerHAL manage CPU FREQ for all 3 modes and use stock powersaving freqs for max clocks
- overall powerHAL now has real management now and multiple tunable presets
- remove camera param debugging that clutter logs
- rebrand our custom hardware HALs into universal5433
- enable vibration intensity control in settings for some options
- update calling overlays and signal overlays
- organize app overlays in device tree
- add some props for HWC
- add mali gpu props
- fix-up core services startup in ramdisk
- let zram go across all 1.5GB of swap
- add AOSP RCS packages
- disable NFC debugging
- properly override AOSP APNS
- remove outdated configs and features from tree
- add fixes for random reboots
- update and improve audio hal / policy
- add basic support for audio cancelation (not fully working yet)
- re-organize stock aosp audio effect support
- fully reworked audio mixers
- redo mic quality / gains for all mics including headphone mic
- redo verbs and channels for audio recording
- reduce and remove clutter from mixers and update the used paths for speaker/earpiece and heaphones
- let camera use both left and right microphones when recording
- remove useless BT code and try to improve stability in media (untested in calls)
- commonize mixers_path for all variants
NOV 24 limited Test build changelog
- Fix OpenCL and Vulkan devices
- Improve UI performance and scrolling
- Disable loggy script to not fill /cache and cause issues. use adb for debugging
- Add fixes for bluetooth SCO (calls)
- Switch to better dalvik-heap config
- expose our opencl and vulkan devices to apps
- properly set max surface buffers to avoid lag over time
- Fix APN issues that broke LTE , 3G on some phones
- Fix Bluetooth stability issues / stuttering
- Increase proximity detection range to match stock
- overall graphics and UI improvements
Lineage 17.1 (11/23/2020
- Rebased trees and update to lineage 17.1 running android ten
- resolved an issue that broke GPS + RIL Connection and affected GNSS Locking
- Updated widevine and implemented clearkey to match modern devices with netflix playback support (requires magisk hide + reboot and some time to show up on the store)
- Updated kernel net driver significantly to resolve connectivity issues
- Remove broken/unsupported WiFi display that caused severe draining
- Fixed Fingerprint for android Q (read F.A.Q For more details)
- Allow direct booting from offline charging mode
- Added logging service to help with user debugging (When facing issues zip me /cache) read F.A.Q if you want to disable it
- Improve network scanning for RIL
- Improve graphics performance
- Early boot system for faster booting speeds
- Include official lineage power HAL which works better on our phones
- Apply fixes for media playback that required hacks previously
- and everything else Android ten brings!
Lineage 16.0 (11/01/2020).
ROM :-
- Updated to latest lineage sources with October 2020 Patch
- Switched to new BSP to compile most blobs (including video , display etc) big thanks @Stricted
- build and update OMX from BSP to resolve many codec issues
- Fix graphical glitches / issues during games (pink stuff)
- remove unused shims from the trees and do general cleanup
- update GPS shim and and improve its stability
- implement MultiHAL Sensors wrapper to resolve rotation and other sensor issues
- Disable broken CPUSETS
- update WiFi Configs and disable broken wifi features
- update TCP and other throughput configs
- Fix spammy P2P wifi logging
- bring back argosd service to fix slow WiFi / lag when downloading (tested upto 260mbps)
- Fixes to Wifi during Doze
- build open source bluetooth blobs with some call fixes
- update and adjust SWAP rates and switch to ZRAM
- disable nearby service by default which makes wifi unstable when bluetooth is active
- use second mic when using speaker calls to avoid echos
- other misc mixer and audio changes
- Disable GPU errors caused by unsupported screen fade effect
- Fix Front camera in stock/3rd party
- fixed video recording in footej camera and its quality to 1080p
- Fix headphone mic one more time
- Add workaround for muted incall audio
Kernel :-
- Remove broken wakelock controls
- implement devfreq boost driver by @Lunarixus
- update LMK driver to resolve issues with memory leaks
- properly kill GPU DVFS control from the driver
- adjust GPU interactive governor
- Fix an issue that made the GPU stuck at 100% utilization with min frequencies (this also resolved serious lag issues)
- bring back stock input booster settings (to maintain decent performance).
Lineage 16.0 (10/19/2019)
1- Fixed low quality video in instagram/twitter and so on by fixing AVC decoder (And encoder was improved)
2- Fixed offline charging animation
3- inline encryption with stock (untested)
4- Tons of fixes to WiFi, will remain working when screen is off, and more stable in games (and enabled background scan/batched scan)
5- Generally improved the quality of video playback / recording (to inline with stock)
6- LowMemoryKiller tweaks added that should help with the memory leak issue
7- Enabled burn-in protection
8- Added some fixes for mediaserver and made it more stable (It will crash less often now, but it will if you try hard enough)
9- Many changes to ramdisk to fix missing nodes (NFC, DVFS, GPS And sensors)
10- Adjust LowBattery warns (to inline with stock)
11- fix some errors in miracast so it works more often
12- Entire rework to the GPU to fix Graphical glitches, crashes and many more to heavy games (PUBG, CSR, COD etc)
13- Removed 100mhz GPU clock, set default min 266, max 600 as stock, removed 800mhz overclock option (Max is 730)
14- Sync with latest lineageOS source
15- And other misc changes to fix performance and battery in general
Lineage 16.0 (10/10/2019)
Cumulative changes from all the previous test versions
1- Re-work Audio fully with a new mixer_path based on stock tinyucm conf
2- Fix call echo in all scenarios (3rd party calls not tested)
3- restore stock gains (the ones we had were all over the place)
4- fix headphone mic in 3rdpaty apps and in calls
5- add missing wideband/narrowband scenarios
6- update the lineage audio hardware hal
7- restore mic level to stock without hurting voice recorders
8- Fix memory issues (with improved LowMemoryKiller and swap)
9- fix random shutdowns due to low memory after long useage
10- Set the minimum GPU frequency to 160
11- Set the GPU to be always online (due to lack of HWC, this fixes performance issues)
12- reduce the effect of touch booster to save battery
13- Disable swipe-up gestures
14- Massive liveDisplay fixing (ColorProfile , Displaymode (Night/day) , Color temperature , Outdoor mode And color calibration support)
15- Other performance improvments
16- Improvments to calls by reverting some broken changes
17- removed AudioFX (Qcom only)
18- added lineage vibration hal
19- removed custom gnss hal that wasnt needed
20- more fixes to GPS
21- slight changes to sensors
22- built healthd hal (still no offline charging)
23- enabled and fixed HWC
24- added a prop that helps with performance
25- Fixed NFC so it no longer ****s everything up when its turned off (and now can be turned on without also ****ing said things up)
26- other misc changes you can see in git
27- Fixed all HWC leaks (therefore you shouldnt have random reboots anymore)
28- Disabled always_on GPU for better battery saving
29- Animations and layers will have improved performance
30- removed a workaround that delayed boots
31- critical kernel changes to remove many workarounds we had by :
32- updated sdcardfs driver to remove legacy stuff
33- updated sdfat driver and enabling it for exFAT
34- updated EXT4 driver and using it for EXT2/3 instead of dedicated drivers for both
35- updated USB and ADB so we dont need legacy stuff anymore
36- updated and enabled F2FS Driver (support not tested)
37- patch a ion leak
38- updated wireless/wifi driver to remove the need for workarounds
39- Added back AudioFX as it works
40- DRM changes
41- default hotspot name
42- fixes to rotation sensor (it works fine with/without location enabled here, but if it as slow, enable location)
43- remove duplicated tether config
44- fix nfc config
45- Updated powerprofiles
46- slight changes to meda and camera set for the future
47- synced with latest lineage sources
TLDR : tons of fixes, better performance and having an actual usable phone.
Lineage 16.0 (9/21/2019)
1- Full hardware video playback (no lag even on 1080p60 playback)
2- LiveDisplay enabled (color mode changing) with more features to be added later
3- updated and enabled back ambient and aod (not fully tested yet)
4- added and updated APN and SPN configs
5- improvments to camera and include camera2 instead of snap
6- fix a mic bug that introduces artifacts in audio recording
7- OMX and media fully redone based on herolte
8- Rotation sensor should be more robust now
9- few changes to spen
10- Bluetooth range and issues fixed
11- improve RIL for SLK variants
12- Fix NFC issues on N916 variants
13- improvments to NFC on intl variants
14- set default color mode to cinema for vivid colors
15- Removed a binary that caused SLK variants to over-heat
16- latest lineageOS sources
17- compiled stable builds for N910SLK|N915SLK|N916SLK
18- overall the build is more responsive and stable due to MFC/OMX fixes
Lineage 16.0 build (9/16/2019)
1- Fixed Video playback for 3rd party apps
2- Youtube and other social media apps will no longer freeze randomly
3- fixed an issue that took a toll on performance
4- over all the rom will be noticeably smoother
Lineage 16.0 initial build (9/14/2019)
1- Updated and reworked the tree all together
2- A decent powerHAL modded to N4
3- Bluetooth APTX errors resolved
4- Fully fixed RIL (no workarounds needed)
5- Entire Kernel has been built from scratch
6- New binder, sdcardfs, and WiFi drivers
7- all the features of HeliosKernel built it and customizable
8- Updated brightness tables to conform with stock
9- removed ugly workarounds and hacks
10- Audio much more stable
11- stock APN , TCP configs and much more
12- Added more LED modes
13- Added AOD and ambient display support that kinda works
14- updated most libs and shims
15- built lineage trust and touch HALs
16- enabled gesture support
17- enabled smart pixels for ROMs that support it
18- And tons of other changes covered in the github source
F.A.Q And Notes
Q : How to use Encryption ?
A : First, head over to TWRP Thread And follow the notes for First time encryption setup (this involves formatting internal storage while using that twrp, This is mandatory as previous twrps did not create proper partition state for encryption), Then head over to settings > security > encryption > Encrypt Phone, the phone will reboot once or twice
Warning : Encryption will prevent TWRP from reading your internal storage at all, And encryption is very sensitive, any untested customization or mods might brick the ROM, and putting your data at risk, only use if required
UPDATE : You will bootloop if you did not set PIN/lockscreen in setup wizard before encrypting
Q : How to Tune for Performance or battery life ?
A : Latest release offers proper Power profiles which can be adjusted in Settings > Battery > EnergySaver and Performance. The slider will adjust MAX CPU frequency as follows,
Power saving Big: 1.4GHz Little: 1.0GHz
Balanced: Big: 1.7GHz Little: 1.3GHz
Performance: Big: 1.9GHz Little: 1.4GHz
Q: N910H wont detect SIM / network
A: This is due to it trying to force LTE, Go to settings > network > mobile networks And change preferred network type to 3G, then enable and disable Airplane Mode. Here is a Video by @mvrul2k20 to explain the procedure
Q : Korean variants (S/L/K) have tube / robotic audio in calls
A : this bug is unfixable for now as those models rely on stock audio hardware effects to fix this issue, but we cant use that and open source H/W does not support them
Q : How to enable android 10 gestures
A : First you need to enable navigation bar (this will disable touchkeys) then go to gesture settings and enable full screen gestures
Q : Recommended camera app to use ?
A : This Google Camera : Download or Footej2 from the play store
Q : When registering FP, i dont see progress or vibration
A : It is fine, keep enrolling your finger, and at the end it will show you pass. this seems to only happen with first enrollment
Q: Whenever I try flashing any lineage- build, I get the following error in TWRP: Updater process ended with ERROR: 7
A: Update your TWRP to 3.2.3 or higher available Here or newer
Q : Device is too warm
A : After first boot that is common, let the phone finish setting up and cool down
Q : How to get google apps ?
A : Go to Opengapps.org . Select ARM > 10 > [your choice] and flash opengapps*.zip after the ROM.zip
Q : How to get Root ?
A : Flash Magisk Root From Here (Recommended version 23.0 for better MagiskHide)
Q : How to tune the kernel ?
A : use HKTweaks app from @corsicanu : Github
reserved3
reserved4
Another great AOSP ROM from a great developer. Keep it up Anan! :highfive:
My boy is on fire!!! You nailed it again, congrats fam!!
Awesome ROM, thank you mate. Congrats
Thanks
Gửi từ SM-N910C của tôi bằng cách sử dụng Tapatalk
Ahhh Yess..
Finally arrive...
Thanks boss
Congrats and thanks for a new rom for our beloved note 4.
I have N916k korean variant i a gonna flash it and see how it runs.
Thumbs up bro???
well done bro, i used to use rr on many phones before, i'll try this too on my n4 right now... but i need an advice for the recommended pack of gapps for this RR.
Tamer Ali said:
well done bro, i used to use rr on many phones before, i'll try this too on my n4 right now... but i need an advice for the recommended pack of gapps for this RR.
Click to expand...
Click to collapse
I am using 20190917 with rr . 20191006 worked with lineage but not rr . That's why i tried 20190917 and it is working very well .
Gửi từ SM-N910C của tôi bằng cách sử dụng Tapatalk
ohh wow.... the best Custom OS coming to the Exynos variant... I greatly appreciate your efforts.
but I have a question: can this work perfectly on my N910S model?
Camera error
Camera dont work please help!
speedpervert said:
Camera dont work please help!
Click to expand...
Click to collapse
Did You read first post?
Few things, is s pen commands work (disabled screen notes on black display? galaxy wearable app?). I need it. Thanks for the info.
cant seem to install this ROM
Newbie here ; So i have a problem with this ROM , I was using your Nougat ROM and installed it without any problems ( 2nd rom ever!) but this one is giving me some trouble so if anyone can help that would be great.
So I rooted the phone ; installed TWRP ; flashed the bootloader ( actions in that order )
Now i selected 3 options when wiping with advanced wipe and did one factory wipe just to make sure im following all the tips in tutorial
Then i when i try to flash the ROM it says " image mounting complete " or something along those lines , then it 2 rows of message that I shoulda wrote down but I was so excited about this ROM and didn't (but can tomorrow ) nothing actually installs and everything takes like 3 seconds for that message to display and the only option is to reboot and I am warned with ( There is no OS installed do you still want to reboot and If i do i'm stuck on logo during booting )
Does anyone have any ideas what am I doing wrong?
Using n910c btw
EDIT :This is where im stuck it asks me this when i want to flash
boot img
select partition to flash image
system image
boot
recovery
Updating partition details...
...done
Full SELinux support is present
MTP Enabled
[ IMAGE FLASH STARTED ]
Image to flash : '/external_sd/RR-P-v7.0.2-20191010-treltexx-Unofficial/boot.img
Calculating restore details
[IMAGE FLASH COMPLETED ]-
Palir93 said:
Newbie here ; So i have a problem with this ROM , I was using your Nougat ROM and installed it without any problems ( 2nd rom ever!) but this one is giving me some trouble so if anyone can help that would be great.
So I rooted the phone ; installed TWRP ; flashed the bootloader ( actions in that order )
Now i selected 3 options when wiping with advanced wipe and did one factory wipe just to make sure im following all the tips in tutorial
Then i when i try to flash the ROM it says " image mounting complete " or something along those lines , then it 2 rows of message that I shoulda wrote down but I was so excited about this ROM and didn't (but can tomorrow ) nothing actually installs and everything takes like 3 seconds for that message to display and the only option is to reboot and I am warned with ( There is no OS installed do you still want to reboot and If i do i'm stuck on logo during booting )
Does anyone have any ideas what am I doing wrong?
Using n910c btw
EDIT :This is where im stuck it asks me this when i want to flash
boot img
select partition to flash image
system image
boot
recovery
Updating partition details...
...done
Full SELinux support is present
MTP Enabled
[ IMAGE FLASH STARTED ]
Image to flash : '/external_sd/RR-P-v7.0.2-20191010-treltexx-Unofficial/boot.img
Calculating restore details
[IMAGE FLASH COMPLETED ]-
Click to expand...
Click to collapse
sorry but, why are you flashing an IMG ?? the rom is a zip file, install it like you would any other zip file. and NOT an img
Sir thnx for the great rom.. I just have one problem i cant connect to 5g wifi network. It just says obtaining but not connecting

[MOD] Straton Audio Mod For Realme 5/5i/5s

Back then I was looking around for sound mod for my realme 5 but I couldn't find one, or I did found but for some reason it didn't satisfy me. I made my own sound mod but it was only in the form of normal files which I had to push manually everytime I shift rom. Then I thought maybe I could make update zip to get rid of the hasle and maybe it would be helpful for others too.
[What Does It Do?]
Simple audio optimization. Nukes unnecessary OEM effects. And ability to configure input or output volume according to your personal preference or headset specification. I've included the details inside straton.prop check it out.
[Compatibility]
Android 10 / 11 oss roms. I haven't tested it on A12 roms, but I'm pretty sure it'll work fine. I don't know about RUI. It's up to you if you wanna take the risk.
[How To Install]
- Set up your configuration by editing straton.prop
- Place straton.prop in internal storage /sdcard/straton.prop
- Reboot recovery
- Flash
[Download link]
Download zip file from post attachment
link for config file : MEDIAFIRE
Note : This mod alter system files directly and modification is irreversible in nature. Backup is recomended.
------------------------------------
STATUS : Stable
DATE RELEASED : Oct 26, 2021
AUTHOR : shygos
------------------------------------

Categories

Resources