Related
GravityMod2 - custom ROM for THL W8 (4GB/8GB/16GB/W8+/Beyond) - Android 4.2.1
Version 3.0
Compatible with 4GB/8GB/16GB versions of THL W8, W8+ and W8 Beyond
Read IMPORTANT INFO ABOUT COMPATIBILITY below.
Introduction
Here comes the Android 4.2.1 ROM with full Project Butter experience with UI running @ 60+ FPS* making our W8 a real beast!
It's based on the latest Eastcom W1 stock Android 4.2.1 ROM. It's a pure stock with a few fixes and mods on top (check out the Changelog in the second post).
For W8 16GB, W8+ and Beyond, the ROM is based on the official THL firmware and it uses official THL kernel.
Installation can be done via recovery (Instructions below).
Thanks goes to akim14 @ androidforum.cz for giving a tip about compatible Eastcom ROM.
* 60FPS is available for W8 4GB/8GB models only.
* W8 16GB runs at max of 49FPS since it's using official THL kernel
* W8+ and Beyond use kernel from Beyond running at 58 FPS
IMPORTANT INFO ABOUT COMPATIBILITY
Although this ROM seems to be working fine on majority of W8 models, there's still a chance you might come accross some issues caused by incompatibility.
Except for memory size, newer batches of W8 seem to have some other hardware differences (e.g. camera sensor) making them incompatible with this ROM.
Since I own W8 8GB version that came out in the very first batch, it is impossible for me to reproduce, debug and fix bugs that may appear on different or newer W8 models. I won't be providing any support nor bug fixes for these models!!! It is simply unmanageable for me! Thanks for understanding.
Therefore, you should rather consider sticking with the stock ROM and installing standalone GravityBox app which will basically introduce all the mods without actually having to flash any custom ROM. This approach avoids all the potential incompatibility issues you may have with non-official ROMs.
And remember, it's always YOUR decision when it comes to flashing ROMs or installing apps.
You should ALWAYS make a backup of stock rom before flashing anything on your device!!! I am getting too many personal message from people that didn't make a backup of stock ROM before flashing GM2 asking for help, which wastes a lot of my free time that could be used more efficiently (e.g. to work on GravityBox app)
Read carefully before you proceed
- full wipe is needed to upgrade from Android 4.1.2 or any other ROM that's not based on this one.
- returning to previous ROM that was backed up using custom recovery is possible only in case you used my ClockworkMod to backup your previous ROM.
All other custom recoveries will simply not work fully because they are not "MTK6589 friendly".
So I strongly recommend to flash my ClockworkMod and perform backup using this recovery before proceeding any further.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main Features
- Project Butter fully working (60FPS UI on W8 4GB/8GB, 49 FPS on W8 16GB)
- Rooted
- Busybox
- Sysinit support (for init.d scripts)
- Updated Google apps
- Google Now included
- Chinese apps removed
- Updated APNs
- CallerID mappings fixed in Phone calls and Messaging
- CyanogenMod Circle Battery
- Auto-hide of signal icons for empty SIM slots
- No annoying "SIM card not inserted" notifications
- Power menu reboot and recovery
- Fullscreen caller photo (thanks to kadan)
- Multiline contact names (thanks to kadan)
- Volume key cursor control
- Recent apps clear all button
- Internet Calls support (SIP)
- OTA updates via GooManager
- Engineering mode accessible from Settings / Developer options
- GravityBox - centralized app for additional customizations
--- Status bar tweaks (QuickSettings tiles, additional tiles, background color and transparency, ...)
--- CyanogenMod Pie Controls
--- Expanded desktop
--- Navigation bar tweaks
--- Lockscreen tweaks (custom background, maximized widgets, ...)
--- Power tweaks (advanced power-off menu, low battery warning policy)
--- Phone tweaks (flip action, disable vibrate on call connect, fullscreen caller photo)
--- Display tweaks (minimum brightness setting, autobrightness settings, ...)
--- Hardware key actions (action on menu long-press/doubletap, back key long-press)
--- Media tweaks (more volume steps for music, skip track using volume keys)
--- Other miscellaneous tweaks
--- General MTK6589 fixes
USE AT YOUR OWN RISK. I TAKE NO RESPONSIBILITY FOR ANY DAMAGE CAUSED TO YOUR DEVICE.
Downloads
Installation package to be flashed in recovery - version 3.0
THL W8 4GB/8GB: http://ceco.sk.eu.org/GooMirror/THLW8/GravityMod2/thlw8-4GB-8GB-gravitymod2-3.0-recovery.zip (MD5: bad6e080d7b1865015ae8ca395093482)
THL W8 16GB: http://ceco.sk.eu.org/GooMirror/THLW8/GravityMod2/thlw8-16GB-gravitymod2-3.0-recovery.zip (MD5: 18d58581ae211724550d31dddbb03640)
THL W8+: http://ceco.sk.eu.org/GooMirror/THLW8/GravityMod2/thlw8plus-gravitymod2-3.0-recovery-20130710.zip (MD5: ed64686bad1d693496bf45e8f1d1fcd4)
THL W8 Beyond: http://ceco.sk.eu.org/GooMirror/THLW8/GravityMod2/thlw8-beyond-gravitymod2-3.0-recovery-20130710.zip (MD5: d25afae1123beba06fb28a09cddee8db)
Incremental updates (installable via custom recovery)
THL W8 4GB/8GB: Incremental update v3.0->v3.1 (hotfix for default write disk setting) (MD5: a04df439bcd58983999108d89dff7e32)
THL W8 4GB/8GB: Incremental update v3.1->v3.2 (hotfix for front camera resolution) (MD5: d34c95bd5ff50935096a6a9c49f5d7d4)
Camera fix for W8 4GB running GravityMod2 3.x
- applicable to W8 4GB models experiencing camera crash
- applicable to GravityMod2 version 3.x
- contains official THL kernel that will reduce FPS from 60 to 49 (which is still acceptable)
- flash via recovery - make a backup before flashing
- no wipes needed
- Download link: http://ceco.sk.eu.org/GooMirror/THLW8/GravityMod2/thlw8-4GB-gravitymod2-camera-fix-20130728.zip (MD5: 0ff9b2314bbd1f454ea85e2042d65291)
Installation instructions
1) Download proper installation package for your W8 model from Downloads section above
2) Put installatrion ZIP on SD card
3) Reboot to clockworkmod recovery
4) Make a backup of your current rom.
5) Perform full wipe: wipe data/factory reset, advanced/wipe dalvik cache
6) Choose "install zip from sd card", browse for installation ZIP and confirm flash
7) Reboot
Incremental update instructions - when updating to newer version
This is in case you are already running some version of GM2 and want to upgrade to newer version of GM2
1) Download incremental update package and put it on SD card
2) Reboot to clockworkmod recovery
3) Wipe cache and dalvik cache (don't wipe data - your user apps will be preserved)
4) Choose "install zip from sd card", browse for incremental update ZIP and confirm flash
5) Reboot
Repartitioning instructions - to get more space for apps (2GB instead of 1GB)
APPLICABLE TO W8 4GB/8GB VERSIONS!!!
1) Backup contents of Phone storage (internal SD) somewhere to your PC.
2) Download repartitioning package and put it on external SD
3) Reboot to recovery
4) Backup your rom - IMPORTANT!!! CHOOSE TO BACKUP TO EXTERNAL SD!!! IF YOU BACKUP TO INTERNAL SD YOUR BACKUP WILLL BE WIPED DURING REPARTITIONING PROCESS!!!
5) Install zip from sd card / choose zip from external sd - choose zip downloaded in step 2)
6) Reboot recovery (recovery main menu / advanced / reboot recovery)
7) Format data partition (mounts and storage / format data)
8) Reboot system
9) You should see notification saying that phone storage is damaged. Open notification and confirm Format SD when prompted.
10) Reboot to recovery
11) Restore Backup made in step 4) (you can restore complete rom or just Data partition using "Advanced restore")
12) Copy contents of backed up Phone storage (internal SD) from PC back to Phone storage (make sure they fit new size)
New size for 8GB model: ~4.5GB
New size for 4GB model: ~0.5GB
GPL compliance
Sources for kernel used in this ROM are available here: https://github.com/C3C0/MT6589_kernel_source
Special thanks to all those who donated. Namely (in alphabetical order)
If you find yourself here without being linked to your XDA nickname/account, let me know via PM.
arcadesdude, benj2013, bglomax, Cheng W., Chris N., Cleverton H., brown777, djbxp, eran134, Florent P., gaz041064, hannse12, Jinish V., Jiri K., Johan T., joshedmonds, juz4fun, kuko61, luizgcrodrigues, maurizmo, Mr. Premise, Nikos, OpenMinded, peptonib, Péter N., quarando, Rejekt, Sergej L., unavix, walkerc3d2010, weszter, whackertje
Changelog 3.2 - 01/07/2013
For W8 4GB/8GB
- Hotfix for front camera resolution
IMPORTANT: if camera crashes after update
it is necessary to clear data for Gallery
(Settings / Apps / Gallery -> Clear data)
Changelog 3.1 - 01/07/2013
For W8 4GB/8GB
- Hotfix for default disk write setting
Changelog 3.0 - 01/07/2013
For W8 4GB/8GB
- updated system files from the latest official THL W8 FW
- updated GravityBox 1.4.1
- updated Google apps
- updated Superuser
For W8 16GB
- completely rebased on the latest official THL W8 FW
- fixes blank screen issues
- fixes front camera issues
- fixes CPU frequency scaling issues
- additional languages ported from Eastcom W1 rom
- updated GravityBox 1.4.1
- updated Google apps
- updated Superuser
Changelog 2.6 - 09/06/2013
- GravityBox 1.1
--- removed redundant power-off menu
--- fixed "SIM not inserted" notifications option
--- fixed circle battery size on W8+ (FHD)
- updated Gmail,Hangouts,YouTube
- updated Superuser
- changed GooManager identifier to avoid false ROM update notifications
Changelog 2.5 - 08/06/2013
- GravityBox app integrated (v1.0)
Changelog 2.0 - 01/06/2013
W8 models:
- system rebased on the latest Eastcom W1 official FW (1.0.3)
- fixed missing permission on cpu_num_limit device node
W8+ models:
- system rebased on the latest official THL FW (1.0.5)
- added init.d support (sysinit)
- updated APN list
- added support for VoIP (SIP) calls in native Phone app
Both models:
- fixed center position of unlock ring
- tweaked autobrightness levels to eliminate flickering on small ambient light changes
Changelog 1.9 - 28/05/2013
W8 models:
- updated kernel taken from the latest Eastcom W1 1.0.3 official FW
--- better support for 2000mAh batteries
--- should increase battery life slightly
All models:
- updated CWM recovery to 6.0.3.3. Includes:
--- synced with upstream sources
--- changed font to increase font size
--- brought back /sd-ext support
--- added custom recovery name and version info
--- links to relevant commits: Part1, Part2
Changelog 1.8 - 22/05/2013
- Fixed FlashLight crash in LCD mode
- Option to launch Engineering mode from Settings/Developer options
- System updates replaced with GooManager (Settings/About phone)
--- introduced GM2 OTA update system
--- Removed obsolete GoogleOTA system
- Google Maps: updated and moved from system to data partition
- Google Hangouts updated
- Play Store updated
- Superuser updated
Changelog 1.7 - 16/05/2013
- reboot recovery icon changed
- updated Google Maps
- updated Google Talk (Google Hangouts)
- updated Google Play Services
- updated Google Now (QuickSearch box)
- added working Adobe Flash Player
Changelog 1.6 - 14/05/2013
- fixed uncontrolled periodic wake from sleep (uncontrolled turning on of the display)
- disabled spammy "nativeGetEnabledTags" log messages flooding system log really hard
Changelog 1.5 - 07/05/2013
- Fixed CallerID mappings in Phone calls (contacts without country code are mapped correctly)
IMPORTANT: it is necessary to clear and re-add contacts for this fix to take effect.
Go to Settings/Apps, locate "Contacts Storage", open it and Clear Data (this will delete all of your contacts
so make sure you have a backup!!!)
If you are synced withh Google account you don't need to backup - your contacts will be synced shortly.
- Fixed CallerID mappings in Messaging (contacts without country code are mapped correctly)
IMPORTANT: fix doesn't apply to existing conversations - they will remain splitted.
So delete problematic threads if any. All new conversations will be grouped OK.
- Removed annoying "SIM card not inserted" notifications
- Added sysinit support (for init.d scripts)
- Autobrightness levels adjusted for better brightness in sunlight (thanks to arcadesdude)
- Enabled support for Internet Calls (SIP)
- Updated Play Store
Changelog 1.4 - 02/05/2013
- Volume key cursor control in text fields
- Added missing lockscreen targets (camera, google search)
- Recents apps: added button to clear all open tasks at once
- Automatic backlight values adjusted (less brightness in dark)
- Wifi scan interval changed from 15secs to 60secs
- Quick-unlock by touching menu key while on lockscreen
- Don't turn on display when charger/USB unplugged
Changelog 1.3 - 28/04/2013
- Updated baseband (from the latest official 4.2 rom)
- Added G-sensor calibration
- Added Proximity sensor calibration
- Fullscreen caller photo (thanks to kadan)
- Multiline contact names (thanks to kadan)
Changelog 1.2 - 26/04/2013
- CyanogenMod Circle Battery
- Auto-hide of signal icons for empty SIM slots
- Power menu reboot and recovery
Changelog 1.1 - 25/04/2013
- Updated to latest Eastcom W1 1.0.2 stock rom
- Fixes low FPS issue for some devices
- Play store app compatibility issues fixed
- DateTime settings crash fixed
- Fixed support for WCDMA 850 UMTS networks
- Louder sound for media
Changelog 1.0 - 24/04/2013
- Initial release
- Based on Eastcom W1 1.0.1 stock rom
Thx for your great work!!!!
Very great news !
I've not the time to test it today, but this is very exciting ! :victory:
C3C076 said:
So far I have come across the well known Date&Time settings crash but
I suppose the fix will come very soon. Except this, everything seems to be working fine.
Click to expand...
Click to collapse
Does this attached file fixes Date&Time Settings issue ?
Source : http://forum.china-iphone.ru/post1031535.html#p1031535
No. It's for the previous Android version. We need a new one. I will take a look at it as soon as I have time.
OK, I'm finally downloading your new ROM and give it a try in the morning... I'm not a patient guy
C3C076 said:
No. It's for the previous Android version. We need a new one. I will take a look at it as soon as I have time.
Click to expand...
Click to collapse
Great ROM. :good: Just flashed it. Date & Time crash sollution:
- Flash the rom
- Boot the OS WITHOUT ANY SIM INSERTED
- Enter Date & Time Settings
- Automatic Date & Time - OFF
- Automatic Timezone - OFF (Uncheck)
- Reboot the phone and insert SIMs
Enjoy.
Sparcot said:
Great ROM. :good: Just flashed it. Date & Time crash sollution:
- Flash the rom
- Boot the OS WITHOUT ANY SIM INSERTED
- Enter Date & Time Settings
- Automatic Date & Time - OFF
- Automatic Timezone - OFF (Uncheck)
- Reboot the phone and insert SIMs
Enjoy.
Click to expand...
Click to collapse
thx !
Can we use the Gravity's kitchen for this beauty?
Hotfix that fixes incompatibility issues of some apps on Play Store is available in the second post.
Sparcot said:
Can we use the Gravity's kitchen for this beauty?
Click to expand...
Click to collapse
Don't even try It won't work.
Tried to install the compatibility fix that you uploaded.
Entered CWM>>Install Zip From sdcard>>Choose zip from sdcard
now I get a message that says:
"E:Can't mount /sdcard/"
how else can I install this file?
or any file actually..
CWM requires external SD card. It cannot install from internal storage.
You can just unzip the file and copy xml file into /system/etc/permissions
Set its permissions to 644 (rw r r)
It seems that not all widgets are displayed in the menu... Cannot even find'em. There's no possibility to put them on the desktop... But maybe that's because I restored them using TitaniumBackup (backups made on 4.1.2). It shouldn't be... Any Ideas?
Added: I tryied to romove an app and afterwards installed it again - no effect.
That's the withdraw of the stock launcher. Install e.g. Nova Launcher from playstore. It will allow you to install any widget when you long-touch the screen.
C3C076 said:
That's the withdraw of the stock launcher. Install e.g. Nova Launcher from playstore. It will allow you to install any widget when you long-touch the screen.
Click to expand...
Click to collapse
Already installed apex - no changes...
C3C076 said:
CWM requires external SD card. It cannot install from internal storage.
You can just unzip the file and copy xml file into /system/etc/permissions
Set its permissions to 644 (rw r r)
Click to expand...
Click to collapse
Also tried with an external SD card...
not working
Works fine here. Maybe it doesn't like your SD card... Or... Aliens
ROM installed, first positive impressions :
- very smooth UI,
- 4.2 Android is very nice
- no problem installing hot fix nor installing the ROM itself
- date & time settings bug corrected thanks to Sparcot tip
- I've installed the apk I use every day, no problem.
- Baseband seems to be improved, seems to work better that previous one, am I wrong ?
the "bugs" :
- we can see Eastcom logo at boot between ThL image and ThL animation
- there is no more music on ThL animation at boot
- proximity sensor : while taping phone number with digital pad (for instance a long tap on 1 for reaching my answering machine), then I wait for earing the voice of my answering machine and then I put the phone on my ear : the proximity sensor does not hide the screen fastly enough, and the contact between the ear and the screen taps on a number (3 for instance). this was not happening with ThL W8 original ROM. I've tried to see in engineer mode to catch a settings but can't find anything about that.
I'm going on testing this nice ROM... :good:
ch-vox said:
- we can see Eastcom logo at boot between ThL image and ThL animation
- there is no more music on ThL animation at boot
- proximity sensor : while taping phone number with digital pad (for instance a long tap on 1 for reaching my answering machine), then I wait for earing the voice of my answering machine and then I put the phone on my ear : the proximity sensor does not hide the screen fastly enough, and the contact between the ear and the screen taps on a number (3 for instance). this was not happening with ThL W8 original ROM. I've tried to see in engineer mode to catch a settings but can't find anything about that.
Click to expand...
Click to collapse
- eastcom logo is somewhere burried in new UBOOT image - nothing we can do about. We need this image to be able to have display working.
- original Eastcom rom doesn't have bootsound. But if you want one you can simply take it from original rom. It is in /system/media
I personally find the boot sound annoying so I am glad it's gone
- not sure about proximity. Seems to be working fine here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lenovo A5000
Lets Start With ROOT
you can use KingRoot It works with me
You have to flash a recovery
Then Flash a Normal SuperSu Flashable file
__________________________________________________________________________________________________
How Tow Setup/Install Recovery
Installation via Flash Tool (is in the archive)
1. Open Flash Tool;
2. On the Download tab, click to select Scatter-loading Scatter and select the file in the folder with rekaveri manner;
3. Wait until checked cheksummy;
4. Check that would stand Download only and was checked in the drop-down menu on the anti-Recovery;
5. Turn off the phone (without connecting to a computer);
6. Click the Download button (with a green arrow);
7. Connect your phone to a computer;
8. Wait until you see a check mark;
9. Disconnect the phone from the computer;
10. Simultaneously press both volume buttons and the power and hold it until the Lenovo logo, and then Knop power can be released, and when there was another logo - you can release the volume buttons;
11. To agree with the information on the initial screen (just svaypnite), it will not allow the phone to restore the standard rekaveri.
For those wishing to get Root
1. Click Install, and then click UPDATE-SuperSU-v2.46.zip file and install it;
2. Wipe cache dalvika and - on request. If you do then keep in mind that after restarting the phone will be turned on for 10-15 minutes;
3. Profit.
Special features
- Full support for the SELinux
- mounting internal and semnoy SDcard to the PC in MTP mode
- will work with flash file systems fat32 and exFAT and the ntfs
- choice FS (ext2, ext3, ext4, f2fs, exfat, fat32) to formatted partition ..
- removal of screenshots by clamping power + volume down (stored in / the sdcard / Pictures / screenshots)
- support OTA
- full functionality the adb
- battery charge
- applied Materialised theme from z31s1g
- added the ability to set the img-files (for this go to the install and the top panel to switch from Install Zip on the Install Image).
-----------------------------------------------------
Recovery Downloads
PhilZ Touch Recovery
Mega.nz
TWRP Recovery
NEW TWRP V3.0
Thank For romario_ne
Download V2.8.7
----------------------------------------------------------------------------------------------------------------------------------------------
Official firmware
Downloads
A5000_S030_150713_ROW [Kitkat]
A5000_USR_S123_150929_ROW [Lollpop]
For Roll Back Form Lollipop To Kitkat
Just Flash it with Flash Tool It will tack 10 - 15 min but it will boot in 2 min without Touch Lag Bug
Roll back Kitkat4.4 V2
4.4 Roll Back re-upload
Unofficial firmware
ROM INFO
For CM12.1 (5.1.1)
P.S : U have to Flash it from Kitkat if u have Lollipop you have to Roll Back to KitKat.
Futures : -
- The All CM 12.1 features
- the Super smooth
- App2SD is working perfectly
- the Run the HD games without crashes
- the Battery the backup The extended, battery now! Just Lasts for very a long periods
- the Video the Recording working in stock camera, SO 3rd party-fi apps needed
- the USSD working - the GPS working - the VPN Working
- the FM the Radio working - only in headphones
- 1080P playback the fixed
- Stability Improvements
- No longer a need to the reboot for-fi apps to Appear in the App Drawer
- No network A drops are
- And SO much more, everything the which you the expect to the get working in your ROM drive is working stock in the this the build of CM 12.1 for Lenovo A5000
-----------------------------------------------------------------------------------------------------
CM12.1 ROMs
CM12.1 Bugless V3
CM12.1 StableEdition
Gapps 5.1.1
For who have bug/SIM not working
FurqanHanif said:
You need to Flash Correct baseband Version too...
Here , Flash This .... .....
http://www.fileconvoy.com/dfl.php?id=gbc087df670300c379997962408d80f79d078fc147
Click to expand...
Click to collapse
-----------------------------------------------------------
FurqanHanif said:
Re-Upload...
http://www.mediafire.com/download/ohxi3qhpabdoxc8/baseband_a5000-imey_fix.zip
Click to expand...
Click to collapse
Screen Shots
Vibe 2.0
We Need Testers
Vibe 2.0
CM12.1 Dev-Rom
This rom is sutable and have a support to OTG & 2 tab to wake.:laugh:
Here a Screen Shot
Downloads : - Dev-ROM -OTG & 2 tap To wake this patch is working only for this rom
Resurrection Remix 5.5.9 v2
Some Friends Here Asked about this ROM and here we are.
This ROM have been tested and u will find it smooth and easy to use they find ever bug in then ROM and fixed it so its Very stable Than other CM ROMs And the stable Test was good for the rom
Screen Shots
Downloads
Resurrection Remix 5.5.9 V2
Other Version of Resurrection Remix by DRT
Setting Fix
MIUI 7ROM Review ON Youtube
INFO:
Android V. : 4.4.x
ROM State : Stable
ROM\MIUI V. : 7.2.1.0
Gapps : Build-In
Root : Root By Flashing Supersu Flashable File
Screen Shots
Miui stable V7.2.1.0.zip [Yadi.sk]
Miui stable V7.2.1.0.zip [Cloud.Mail.ru]
CM13
Hello Guys
As i promised i Ported and tested it and it was very good for the Phone But The Bluetooth And GPS Will not working for now but every thing is stable.
but it will take sometime to upload it and take the promise from The Maker to share.
Edit : i am Uploading it Right NOW so Please Wait it will take some hours upload speed is [23.3kb/s]
Screen Shots
ng
Downloads
CM13 ROM
Gapps 6.0.1
R-Remix v5.6.7
hello guys
I know u missed me, i missed u too guys
Lets back to work Here is
R-Remix v5.6.7
Info :-
Rom is CM13 Stable
Smooth / stable
Not working :- Camera / GPS
Everything else is working like wooow ??
Download
R-Remix v5.6.7
-----------
Gapps 6.0.1
Camera fix by
byseby said:
Resurrection remix marshmallow camera fix i just created
Click to expand...
Click to collapse
Camera R-Remix 5.6.7 Fix
Camrea & Otg Fix By Wac Pereng
Download Links
________________________
Screen shots coming soon
OctOs 5.1.1
- All OctOs Features
Visit https://www.teamoctos.com/ for full feature list
- Based on latest Sources (r35)
- Super smooth
- More stable and smoother than CM 12.1 Bugless V3
- App2SD is working perfectly
- Run HD games without crashes
- Video Recording working in stock camera (Default CM camera)
- USSD working
- GPS working
- 1080P playback fixed
- 1080P recording
- Stability improvements
- Super fast boot up
- Super fast App optimization
- Themes working
- SMS working
- No longer need to reboot for apps to appear in App Drawer
- No network drops
- And so much more, everything which you expect to get working in your stock ROM is working in this ROM
Rom Link :-
Download Link
Gapps :-
Download Link
ScreenShot:-
L-Prime
It's the first Lollipop Based Rom From a Friend � Sennid Atecnal
Info
# Link of L-Prime 5.0.2 for Lenovo A5K
# Features
- Smooth and bugless 99.9%
- 3mint Battery Setting added
- Buzz Launcher added
- tweaks like miley added
- Gapps included on this rom
- Better battery backup
- No lags specially for gamers
- exposed installer not included (for some user option)
- other explore on your self
- enjoy and hit thanks to porter
Note: Flash in your own risk I'm not responsible for break or damage your phone.
How to flash
- Always do backup before flashing any custom rom
- must be TWRP recovery install and rooted phone
- just go to recovery mode then select back up 1st
- After backup just full wipe data factory reset to clean current rom
- located L-Prime and install
- aftet flashing done do wipe cache / davlink
- Reboot and enjoy
Links :-
# Link of ROM
Download Here
# Off Charge fix flashable patch
Download Here
AICP Rom
Hey guys, i know Again
Ported by Juspher Pedrozo thanks body for ur hard work
Feutures/Working
What's Working :
Camera
Video recording in stock/google camera is working with 1080P !
Audio in calls
Bluetooth
USSD
Audio
Mic
RIL
SMS (Receive and Send both working)
WiFi
Data
RIL is now more stable
Dual SIM
Gapps
Hotspot
Screen Recording
Both storages (SD and Internal) mounting in both Phone and PC
Gapps
720P working in youtube
Bugs :
GPS - Partially working
Few bugs here and there (might or might not be noticeable)
Screen Shots
ROM :-
Download Link
Gapps:-
Download Links
R-Remix v5.6.8
Hey Guy, How are u ?
Porter :-Scout919 / Juspher Pedrozo <------ Same Persion
Fixer :- Wac Pereng
Futures/Changelog
Ps :- Don't open it. it's huge
# The Changelog/Futures
# ResurrectionRemix - v5.6.8 - Android r43 - 20160512
- Bug Fixes
- New Battery mods
- Upstream changes from CyanogenMod
- Upstream changes from Google
- Possibly 2G/3G switch fixed (do not complaint if it does not work for you)
- SystemUI Improvements
- Smoother Multiwindow
- Updated translations and strings in Settings
- Many other minor improvements and fixes
# ResurrectionRemix - v5.6.8 - Android r43 - 20160507
- Android 6.0.1-> r43
- Many fixes and improvements
- Added OTA support for MT6582
- Fixed auto-rotate
- Fixed call fc
# ResurrectionRemix - v5.6.8 - Android r30 - 20160502
- Android 6.0.1_r24-> r30
- Update Bootanimations
- Update boot logo same as bootanimation
- Custom Settings Dashboard Colors
- Pulse Visualizer Sanity Level
- Pulse Bar Customizations
- Configurable Pulse Bar Spacing
- ThemeChooser: update UI
- Fix Selinux permessive mode reset after every reboot
- Dyanamically Configurable Pulse Bar Dimensions
- Floating Window
- Add Back Pie
- Add Pulse Tile
- Statusbar weather: fix temp style after refresh
- FWB :SmartBar Button Tint
- Update some settings configurations icons
- Disable expanded status bar weather by default
- Add Option to Enable/Disable ScreenShot & ScreenRecord Shorcut
- Configurable Keyguard Quick Shortcut Colors
- LLS: Show notification panel if LLS crashes
- LLS: Fix screen off event firing when not interactive
- Improve TM animation & use stock detail background
- Use CircularReveal animation to show/hide task manager panel
- Add the ability to hide superuser status bar icon
- Switch back to cm root as default
- Keyguard Charging Current Switch
- Keyguard: show charging current in mAh on lockscreen
- Themes: Update icon mapping on boot
- Update themes icon drawables
- fwb: Add ability to permanently hide apps from recents
- ThemesTile: Don't process clicks on current theme item
- ThemeTile: Custom QS detail header title support for theming apps
- About RR : Add g+ account to profile cards instead of twitter
- Update Some Settings Activities
- Settings: Ensure user has to wait 30 before retrying pattern
- SystemUI: add HeadsUp snooze disabled state
- bootanimation: Switch to readahead
- SystemUI: HeadsUp toast message
- SysUI: Improve Show3g Logic
- add ability to disable bar color in battery saver mode
- Global actions: fix airplane mode switch for MSIM
- SystemUI: Fix nav bar transparency when enabling software keys
- SysUI: Fix reporting of swipe progess in notification panel
- Lockscreen : Ensure we hide bottom area in bouncer
- livedisplay: Moving LiveDisplay to CMSDK
- Lockscreen : Update shortcuts in onAttachWindow
- GlobalActions: Always use setZenMode
- Lockscreen : Fix dead-zone in bottom area
- Remove Hide Settings Icon from header
- SystemUI: fix double tab launching custom lockscreen icon
- Point Amibent display tile longpress action to it's own settings
- Remove Invert Colors and Cast Tiles as Default
- Update A Custom SB logo
- Check for deprecated third party keyguard perm
- packagemanager: Fix bootloop if packages.xml is deleted
- Fix Heads Up and TaskManager buttons in StatusBarHeaderView
- QSTiles: set disconnect callback in bluetooth details list adapter
- SystemUI: Fix Statusbar Clock font size/color on location changes
- Support for new properties to identify country based ecc #s added by RIL
- Remove the brightness mirror
- Give LockClock the location permission by default
- translation imports
- For more info Track Github Activities
# ResurrectionRemix - v5.6.7 - Android r24 - 20160409
- Android 6.0.1_r22 -> 6.0.1_r24
- Add 5 RR 1 PB header logo
- Update taskmanager switch button
- Add Heads-up button in the extended statusbar
- SystemUI: Fix Dual Tiles Qs Color Switch Text
- Revert Restart System UI on theme Change and NP color switch
- Heads Up Snooze
- Fix low battery warning level
- 2 more SB Custom logos
- HeadsUp: add timeout option
- Reverted clock second (Avoid to lag issues)
- Fix Applying Notification Colors To Light StatusBar Background
- Tune up dexopt dialog
- Settings: Make Most RR settings Searchable
- DevelopmentSettings: Synchronize USB connection data state
- Lockscreen : Fix bottom area visibility
- media: Add flags, channelMask, and UID to audio session callbacks
- audio: Don't play sound effects if stream is muted
- SystemUI: show visualizer in shade-locked view
- Bugfixes for systemUI
- Fix location tile not showing in the keyguard
- NetworkManagement: Add ability to restrict app WiFi background data access
- SystemUI: ensure volume record exists before showing notification
- MountService: ensure VolumeRecord with UUID exists before modifying
- Implement left swipe on lockscreen
- Framework changes for resetting data usage statistics
- LLS: Use window attachment callbacks
- SysUI: Add event logs for live lock screen interactions
- Fix battery stats helper derp
- Update ambientsdk version 1.5.2
- Add Weather Content Provider
- Add state member to WeatherLocation class
- Reset timer when a new weather service provider is selected
- Force Heads up in all applications
- Add system property to control config_enableAutoPowerModes
- SysUI/LLS: Slide panel out when collapse called
- QS:Re Add LS Tile and Addapt to AOSP panel
- translation imports
- For more info Track Github Activities
Downloads :-
Rom :-
ROM Download link
Gapps :-
Gapps
Fixes :-
Fix 01
ReUpload For FIx 01
Resurrection Remix 5.7.0 - 5.7.3
Hey again
sorry for late i will try to update the page with the last and Tested roms as i can
V5.7.0
[URL="https://yadi.sk/d/CQd9FIl2uECdx"]V5.7.3
Presenting you the new and latest build of MIUI V8. With almost all bugs fixed. Really smooth and fast. Can be used as a daily driver with no issues.
This ROM can be ported to all MT6582 devices running Android 4.4.2, so do not keep asking me if it will work on your device or not.
[/URL]
Thanks for visting me here
CM14.1 (7.1.1) u can try it on our site
Roll Back Form Lollipop To Kitkat
is't working well or you don't try it
cause i wonder it !!!!!
akrdr said:
Roll Back Form Lollipop To Kitkat
is't working well or you don't try it
cause i wonder it !!!!!
Click to expand...
Click to collapse
Roll Back is Working Fine for me , and Also DoubleTap and Sweep to Wake both Working Too... No Touch issue etc....
---------- Post added at 08:08 AM ---------- Previous post was at 08:04 AM ----------
kemo12533 said:
Lenovo A5000
Root
Kitkat Root
Code:
you can use [URL="http://www.kingroot.net/"]KingRoot[/URL] It works with me :D
Lollipop Root :
Code:
You have to flash a recovery
Then Flash a Normal SuperSu Flashable file
--------------------------------------------------------
Recovery Recovery For [Lollipop And Kitkat]
Code:
How Tow Setup/Install Recovery
Installation via Flash Tool (is in the archive)
1. Open Flash Tool;
2. On the Download tab, click to select Scatter-loading Scatter and select the file in the folder with rekaveri manner;
3. Wait until checked cheksummy;
4. Check that would stand Download only and was checked in the drop-down menu on the anti-Recovery;
5. Turn off the phone (without connecting to a computer);
6. Click the Download button (with a green arrow);
7. Connect your phone to a computer;
8. Wait until you see a check mark;
9. Disconnect the phone from the computer;
10. Simultaneously press both volume buttons and the power and hold it until the Lenovo logo, and then Knop power can be released, and when there was another logo - you can release the volume buttons;
11. To agree with the information on the initial screen (just svaypnite), it will not allow the phone to restore the standard rekaveri.
For those wishing to get Root
1. Click Install, and then click UPDATE-SuperSU-v2.46.zip file and install it;
2. Wipe cache dalvika and - on request. If you do then keep in mind that after restarting the phone will be turned on for 10-15 minutes;
3. Profit.
Special features
- Full support for the SELinux
- mounting internal and semnoy SDcard to the PC in MTP mode
- will work with flash file systems fat32 and exFAT and the ntfs
- choice FS (ext2, ext3, ext4, f2fs, exfat, fat32) to formatted partition ..
- removal of screenshots by clamping power + volume down (stored in / the sdcard / Pictures / screenshots)
- support OTA
- full functionality the adb
- battery charge
- applied Materialised theme from z31s1g
- added the ability to set the img-files (for this go to the install and the top panel to switch from Install Zip on the Install Image).
-----------------------------------------------------
Recovery Downloads
Code:
PhilZ Touch Recovery
[URL="https://mega.nz/#!nQUzAKrA!mXOVPvhD9-c8GwcEMv0o-HcrKy8XiPy65v0dtyobqHQ"]Mega.nz[/URL]
TWRP Recovery
[URL="http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=40945"]Download V2.8.7[/URL]
Some Pic For The Recovery
----------------------------------------------------------------------------------------------------------------------------------------------
Official firmware
Code:
Downloads
[URL="https://cloud.mail.ru/public/H63g/3gtwfT3xA"]
A5000_S030_150713_ROW [Kitkat][/URL]
[URL="https://cloud.mail.ru/public/Ckem/6GnJcu7oA"]
A5000_USR_S123_150929_ROW [Lollpop][/URL]
For Roll Back Form Lollipop To Kitkat
Code:
[URL="https://cloud.mail.ru/public/AS98/gcJGr8888"]Roll back Kitkat4.4 V2[/URL]
Unofficial firmwareRoms
Code:
For CM12.1 (5.1.1)
P.S : U have to Flash it from Kitkat if u have Lollipop it will not work
Futures
- The All CM 12.1 features
- the Super smooth
- App2SD is working perfectly
- the Run the HD games without crashes
- the Battery the backup The extended, battery now! Just Lasts for very a long periods
- the Video the Recording working in stock camera, SO 3rd party-fi apps needed
- the USSD working - the GPS working - the VPN Working
- the FM the Radio working - only in headphones
- 1080P playback the fixed
- Stability Improvements
- No longer a need to the reboot for-fi apps to Appear in the App Drawer
- No network A drops are
- And SO much more, everything the which you the expect to the get working in your ROM drive is working stock in the this the build of CM 12.1 for Lenovo A5000
[URL="https://yadi.sk/d/hqO4v-85ouGRH"]CM12.1 Bugless V3[/URL]
[URL="http://downloadandroidrom.com/file/gapps/5.1/gapps-L-4-21-15.zip"]Gapps 5.1.1[/URL]
[img]https://2.downloader.disk.yandex.com/preview/3a9316cf62452483458dae1f5d1c1613ab849791499d26e791390788415fb878/inf/pA6iZj4-fc9HKfvZ6VImxWJV3Z0jMWxUVFqsKeT7w4pjfmX0uMOeCu6dYr7KNXNfKdoDIj6DQkD2s1SWXF2Syg%3D%3D?uid=0&filename=7172199.png&disposition=inline&hash=&limit=0&content_type=image%2Fpng&tknv=v2&size=1249x515[/img]
[img]https://4.downloader.disk.yandex.com/preview/77cd2b7f3a73cbc0aae252a72842f871c07e619191efd8c31c45844ee63bad87/inf/fJTqZi3DwG_3LJoGju4OtfJ0DXJO4GmrP0dsGCcgTG6bMPWNemXJNmPhKazWwjYsYS4diAWPBbTBj7-65tFHrg%3D%3D?uid=0&filename=7172211.png&disposition=inline&hash=&limit=0&content_type=image%2Fpng&tknv=v2&size=1249x515[/img]
[img]https://4.downloader.disk.yandex.com/preview/cef2d78df3cb62a5d66167f7a9fa806b752b1098bee0d20f77c9a53fc1110658/inf/pA6iZj4-fc9HKfvZ6VImxbg7HOvim6vvbzqxOagSCobETdv17PY6KYFscxCAfm_PTn1B3pwshpo9bbm_XG-ULQ%3D%3D?uid=0&filename=Screenshot_2016-01-18-12-49-53.png&disposition=inline&hash=&limit=0&content_type=image%2Fpng&tknv=v2&size=1249x515[/img]
If u want any Rom Please ASk And I will try to Get It For U
Click to expand...
Click to collapse
Should i Flash This CM 12.1 on KitKat ??
kemo12533 said:
If u want any Rom Please ASk And I will try to Get It For U
Click to expand...
Click to collapse
Well! Would You be so kind to find Vibe UI 2.0 custom ROM for Lenovo A5000 with OTG supporting?
romario_ne said:
Well! Would You be so kind to find Vibe UI 2.0 custom ROM for Lenovo A5000 with OTG supporting?
Click to expand...
Click to collapse
I will try but what about a CM 13 Bassed on marshmalo rom ?
FurqanHanif said:
Roll Back is Working Fine for me , and Also DoubleTap and Sweep to Wake both Working Too... No Touch issue etc....
---------- Post added at 08:08 AM ---------- Previous post was at 08:04 AM ----------
Should i Flash This CM 12.1 on KitKat ??
Click to expand...
Click to collapse
Yes
akrdr said:
Roll Back Form Lollipop To Kitkat
is't working well or you don't try it
cause i wonder it !!!!!
Click to expand...
Click to collapse
No its working fine just try it
kemo12533 said:
I will try but what about a CM 13 Bassed on marshmalo rom ?
Click to expand...
Click to collapse
It would be very interesting!
romario_ne said:
It would be very interesting!
Click to expand...
Click to collapse
Then Wait they already start to work in it but it will have many bugs
kemo12533 said:
Yes
Click to expand...
Click to collapse
Any Bugs So Far in CM 12.1 ?? And is OTG working Fine ??
kemo12533 said:
Lenovo A5000
Recovery Downloads
Code:
PhilZ Touch Recovery
[URL="https://mega.nz/#!nQUzAKrA!mXOVPvhD9-c8GwcEMv0o-HcrKy8XiPy65v0dtyobqHQ"]Mega.nz[/URL]
TWRP Recovery
[URL="http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=40945"]Download V2.8.7[/URL]
Click to expand...
Click to collapse
you should note that the TWRP recovery you have is for Lolipop Official Rom only (and that flashing it on a KitKat rom or any other rom will cause swiping problems on the android os)
FurqanHanif said:
Any Bugs So Far in CM 12.1 ?? And is OTG working Fine ??
Click to expand...
Click to collapse
This Ver. This is Bugless Rom
and yes OTG Working
I said everything u see it in stock u will find it in this rom
bronozoj said:
you should note that the TWRP recovery you have is for Lolipop Official Rom only (and that flashing it on a KitKat rom or any other rom will cause swiping problems on the android os)
Click to expand...
Click to collapse
I Will Add other one For Kitkat
kemo12533 said:
Yes
Click to expand...
Click to collapse
kemo12533 said:
This Ver. This is Bugless Rom
and yes OTG Working
I said everything u see it in stock u will find it in this rom
Click to expand...
Click to collapse
SO i Flash This Via TWRP but i Got Error , Executing Update Binary error , why is That (i already Cleared Data and Cache Partitions) ??
FurqanHanif said:
SO i Flash This Via TWRP but i Got Error , Executing Update Binary error , why is That (i already Cleared Data and Cache Partitions) ??
Click to expand...
Click to collapse
If u flashed it from Lollipop frame ware it will gave u this error
u can only flash it from Rollback KK
kemo12533 said:
If u flashed it from Lollipop frame ware it will gave u this error
u can only flash it from Rollback KK
Click to expand...
Click to collapse
i FLashed it From KK,,
Any How Figure out the Problem , i Updated TWRP to 2.8.7 and Flashed Gone Successful , Looks like TWRP Bug....
only Problem is That , this New TWRP is in Russian Language Only , i Hope Someone Change it's Language to English.. :/
https://cloud.mail.ru/public/9fmd/LF7F9Qyrd
FurqanHanif said:
i FLashed it From KK,,
Any How Figure out the Problem , i Updated TWRP to 2.8.7 and Flashed Gone Successful , Looks like TWRP Bug....
only Problem is That , this New TWRP is in Russian Language Only , i Hope Someone Change it's Language to English.. :/
https://cloud.mail.ru/public/9fmd/LF7F9Qyrd
Click to expand...
Click to collapse
If u rolled back from Lollipop Then Use this One it Works Perfect with me, Here, I hope i Helped u
Rollback to Kikat Lenovo A5000 and Worries
.My phone Lenovo A5000 had updated via OTA on 5.0.2. Now, I want to rollback to Official Kikat 4.4.2. But I worry about issues as laggy touch screen and no having OTG.
Anybody show me solutions....
Marshmalow CM13 based ROM
Any news about this ROM?
By the way - does anybody need TWRP V3 multilanguage, not lagging swipe and OTG support on it?
If you do - here you are: TWRP V3
Someone Make a Full Custom ROM of Resurrection Remix for Lenovo A5k.. This ROM sounds like a Stable One And Bug Free Too ...
http://www.mtkroms.com/2016/03/final-resurrection-remix-bugless-mt6582.html?m=1
---------- Post added at 04:01 PM ---------- Previous post was at 03:59 PM ----------
romario_ne said:
Any news about this ROM?
By the way - does anybody need TWRP V3 multilanguage, not lagging swipe and OTG support on it?
If you do - here you are: TWRP V3
Click to expand...
Click to collapse
Here Look At This Link , Looks like someone is Working on It , Hope Some Developer work on it and Build a Full Custom ROM of CM 13 ..
http://www.mtkroms.com/2016/02/marshmallow-cyanogenmod-13-for-mt6582.html
Thanks for TWRP v3 (working FIne So far) :good: but What's the Correct Buttons Combination to Go into Recovery Exactly ?? Tried Almost Every COmbination , Not a Single One Working ..
---------- Post added at 04:05 PM ---------- Previous post was at 04:01 PM ----------
Leona000 said:
.My phone Lenovo A5000 had updated via OTA on 5.0.2. Now, I want to rollback to Official Kikat 4.4.2. But I worry about issues as laggy touch screen and no having OTG.
Anybody show me solutions....
Click to expand...
Click to collapse
i Think Solution is Already Mentioned on First Page .. any way , RollBack working Fine for me , No Touch Lag No OTG Bug .
Just simply Flash S030 kitKat in Normal Way and then Flash This Custom Kernel , OTG and Lag Fix and also it has Gesture wake too (DT2W , S2W) ...
ftp://185.86.77.191/LuckAs-kernels/A5000/LuckAs-A5000-kernel-3.4.67-20160225-17-07-boot.zip
---------- Post added at 04:20 PM ---------- Previous post was at 04:05 PM ----------
kemo12533 said:
If u rolled back from Lollipop Then Use this One it Works Perfect with me, Here, I hope i Helped u
Click to expand...
Click to collapse
Anyway this 2.8.7 Recovery Never Worked for me after Roll Back, Tried TWRP v3 (Currently using ADB/Quick Reboot to reboot into Recovery , correct Combination don't Know ............. ) , Working Fine SO far , flashed CM 12.1 (5.1.1) without any Problem , just Found a minor Sound Bug ( Low Volume/Audio from Headphones and Speakers while on Call ) , Hope someone Fix it Soon ( did some googling , found a lot of people having this Issue ) , Also their is No Safe Eject for OTG which is Strange , And Hardware Acceleration BUG which causing some of Apps Not To Work Properly ( Like MX Player HW+ and SCR Recorder Pro) rest Working Awesome , Performance wise GOOD ( at least much lighter than that Vibe UI and MIUI )...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Elite ROM
For Honor 8 Lite
DONOT COPY MY WORK, Ask for Permissions or Gather it yourself,,,
This ROM is only for Firmwares based on EMUI 5.X only...
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm
* App failed. Please do some research if you have any concerns
* about features included in this ROM before flashing it,
* YOU are choosing to make these modifications, and if you
* point finger at me for messing up your device, i will laugh at you.
*
*/
DESCRIPTION:
Hey guyz..... Me Hassan Mirza from Pakistan
As you all know Elite ROM now, Its being the Most viewed & Downloaded ROM for any hi6250 device... Thank you guys...
The Elite ROM has these advancements,,,
Features:
*Both with Kangvip & without Kangvip Roms added in single zip and aroma installer will let you choose which one you wanna install...
*Base of Kangvip Framework updated... included many new features and some useful navbar tweaks too... also includes the immerse mode for navbar and notification bar... you will love that one...
*EliteKernelReborn Overclocked to 2.3GHZ,
*Hotplugs Added, including Alucard hotplug, thunderplug, bricked, etc etc
*TCP Tweaks added
*SioPlus io scheduler added
*Support for Wake Blocker integrated
*Support for Wire Guard added
*Integrated vnswap from Samsung
*Increase Kernel Stack to 32K
*CRC check is now toggable
*faster /proc/vmstat
*dm-crypt: increase threads
*UKSM Integrated
*Aggressive Multi-core power savings
*Base Rom updated to April Patched Rom...
*Elite Kernel Reborn Updated to v7.1+ including new SioPlus io, Brightness bar is more smooth in dark mode, hotplug, cluster plug, can be OverClocked with a switch or command... thanks to @cyclon1978
*Aroma Installer added... Let you decide to choose whats best for you... Like kernel mode that you need, apps selection, root method, sound mod, lite mode, raw mode, dt2w off or on, all present in it, choose if you want anything or not...
*Real Kangvip Framework package installer and initializer added, it could be one reason too for forgetting permissions as it control it....
*HiCloud Fix also integrated in rom,
*Choice in Camera selections... Mate 10 Pro, P10+, 7X & P10 Lite cameras added...
*Huawei Swype Keyboard selection added,,, installed if you allow it
*Thats all things in just less than 2GB zip file....
*Used another technique which reduced size of many partitions like cust, system, product, and included more rom devices variants support... cust partition 160mb+ to just 53.3mb including all variants mods... same with other partitions, system is of just 1.6gb...
*All in One package... No patch provided for other devices... Aroma will let you decide your device too...
*Global Immersive Mode to hide navbar & status bar for big display...
*Elite TWRP-3.2.1-0 included in Advance Settings...
*EliteKernelReborn v7.1+ with/without Brightness Mod is available
*All features of v7, v7.1 & v7.2 integrated
*Sync issue 100% Fixed
*Homescreen icons issue 100% Fixed
*No More Reboots or Bootloops to eRecovery
*Xposed Upgraded to v89
*L21 Patch integrated as this model provide basic files which work on all ROMs as u all reported...
*Security against Krack updated
*Smart Cover gesture added
*New Eye Catching Black Theme Added...
*Split Screen Gestures added...
*Use the Navigation bar with Fingerprint
*2 variants available, with K-Settings & without K-Settings
*DeOdexed ROM for better theming purpose...
*Encrypted ROM... no more piracy...
*Fixed ADB Debugging Menu within Phone...
*MultiCust ROM... You Can Flash it in EU(C432), MEAFNAF(C185), LA(C605), China(C00) regions...
*Camera Night Shot added...
*VoLTE working fine...
*Fully Debloated... No bloatware present...
*Base of KangVIP ROM updated to EMUI 5.1.1 ROM which includes these features,
Added hidden signal WiFi icon option (K settings - status bar settings)
Added the current wifi password ip, etc.,
display all saved wifi password options
Update the new version of SuperSU Repair lock screen power icon misalignment
Fix the lock screen CPU temperature display can not close
Fix the root privilege bug (update the latest su)
Added V4a sound effects (K settings - more settings)
Added list animation effects
Re-modify the desktop layout, row / column icon can be set separately
Added to modify the phone model, version information and other settings
Added the hidden alarm icon option
Added the hidden Bluetooth icon option
Added hidden eye icon options
Added the hidden headset icon option
Added multi-window mode Enabled, you can split the screen display multiple programs,
each program window can be free to adjust the size (restart effective).
In the task list which enabled the function, each program will Added a window icon.
Re-create the screen assistant icon, the default for the green grass color (other ROMer "borrow" please specify the source)
When the horizontal screen is fixed, the navigation bar icon is dislocated
Fixed a problem with the navigation bar icon below 350
Repair lock screen password interface cpu temperature display overlap problem
Fixed lock screen interface operator customization failure problem
Added the game mode, CPU GPU running at full speed without frames
Added the volume key to wake up the screen (K settings - more settings)
Added the global gesture, Added all applications to double-click
Fix the installation of app after the incompatibility problem
Fix root issues are incomplete Repair the navigation bar menu key failure problem Rewrite the K settings, the perfect fusion of style and EMUI5.1
New navigation bar task key long press / click action custom (K settings - navigation bar settings)
New Navigation Bar Hidden Button Long Press Action Custom (K Settings - Navigation Bar Settings)
New navigation bar menu button long press the action custom (K settings - navigation bar settings)
Added status bar time double line display (also show time and date)
*Reboot to eRecovery, Recovery, Hot Reboot added...
*Latest and New Google App with Android Wear & Android Auto
*Cool Animations and Top Smoothness you will ever have in any ROM
*On fresh Reboot, 1.5GB/2GB Available..
*SafetyNet is Passed with MagiskSU 14.0 and Xposed Disabled
*4G Switch Enabled
*Special SuperSU & MagiskSU root methods available,,, Kangvip tools wont work with other roots....
*New Emoji's without any module.
*android pay works with nfc
*Local Huawei Backup Enabled
*New Settings App with new features
*Virus Scanner built-in
*5x5 and 6x5 layout and Launcher Rotation added,,,
*More Ram Optimized
*Full Firmware size just 2GB including all patches...
*Multitasking improved with EMUI5.1.1
*Many new file system supports, fingerprint boosted , f2fs support, fsync support, many new features.....
*Elite Development bootanimation
*LZ4 compression and ZRAM added too in kernel
*init.d Support added
*New gaming libraries
*OTA compatible
*Many hwcomposer tweaks for better photos and videos recording and viewing
*Can unbrick any type of Firmware (be sure to be on Nougat atleast)
*Audio Encoder has high bitrate...
*Many new Launcher tweaks
*Private Space, Multiuser, App twin with various social apps added
*Double tap to wake device added
*Many new Smart assistance options & tweaks
*Inbuild call recorder added
*Beauty shot Libraries added
*Powerful ROM with Battery calibrated for High Performance
*Ram scripts added for getting more free ram by disabling zram
Installation Instructions:
1.) Download Elite ROM v7.7 from 2nd Post.
2.) Do Titanium Backup always so you dont lose data with apps...
3.) You Must only have EliteTWRP as other TWRP's wont work... ( In 2nd Post too )
4.) Reboot to TWRP and Backup Everything including Boot, Data, System, Product, Vendor, Version (Most important)
5.) Format Data Once with EliteTWRP, then Reboot TWRP... Wipe Everything in wipe section (dont wipe sdcard)
6.) Go to Install Option in TWRP and install the Elite ROM zip file & Choose things Accordingly...
7.) Reboot with Pray
*If you still have Sync or Homescreen icons or Permissions issue, then try to change google services in k-settings OR replace vendor/lib64/libcutils.so with the one from ur previous rom or the one u had once worked using TWRP & wipe dalvic & cache... it will solve all your issues....
*No support for Magisk & Xposed Framework!!
Installation, Reviews and Usage of Elite ROM v7.4Root integrated for selection... If you forget, Refer to 4th Post below,,,
This took Countless hours to be build,,, you all know that.......
If you are Enjoying OR Liking my work, Support with Donation
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
Take Permission before sharing links or copying to other Forums....
If something is not working and you need support from me, then upload recovery.log of your problem,,, i wont considered your problem as a real problem without log,,, because others saying this as working!!
Changelog in 3rd post...
Read Updated FAQ in 5th Post...
Kernel Source: https://github.com/HassanMirza01/android
This ROM is Based on Stock P10 Lite ROM EMUI5.1
Contributors:
@HassanMirza01 for doing all this
@Chainfire for Giving us the Power of SuperSU
@Chisetdel31260 for Providing the Idea & All Files i requested
@Meticulus for the best Contribution on MM blobs and codes,,,, Love you bro
@petya230 for supporting me
@Tecalote for helping and providing SuperSU zip...
@cyclon1978 for his work on CycloX kernel...
KangV & Team HRT for their best KangVIP framework
And the Haters... Who Criticised me on my every Development and i Keep saying them, "Watch Me Doing it"
ROM OS Version: P10Lite's EMUI5.1.1
ROM Kernel: EliteKernelReborn v7.2+
ROM Firmware Required: Bootloader Unlocked / EliteTWRP / EMUI 5.X Firmware
Based On: EMUI 5.1.1
Version Information:
Status: Stable
Created on: 2017-07-12
Last Updated on: 2018-04-25
Download Links:
Elite ROMs:
Elite_Rom_v7.7_for_P9-Lite_Honor_5C_6X_8-Lite_by_HassanMirza01
EliteKernelReborn v7.3 with Darkness Mod...
EliteKernelReborn v7.3 with Normal Brightness Mod
All my ROMs are available on my Blog,,, My Blog
Elite TWRP Project
Press Thanks and donate if you like it
CHANGELOG:
2018-04-23 Elite ROM v7.7:
*Both with Kangvip & without Kangvip Roms added in single zip and aroma installer will let you choose which one you wanna install...
*Base of Kangvip Framework updated... included many new features and some useful navbar tweaks too... also includes the immerse mode for navbar and notification bar... you will love that one...
*EliteKernelReborn Overclocked to 2.3GHZ,
*Hotplugs Added, including Alucard hotplug, thunderplug, bricked, etc etc
*TCP Tweaks added
*SioPlus io scheduler added
*Support for Wake Blocker integrated
*Support for Wire Guard added
*Integrated vnswap from Samsung
*Increase Kernel Stack to 32K
*CRC check is now toggable
*faster /proc/vmstat
*dm-crypt: increase threads
*UKSM Integrated
*Aggressive Multi-core power savings
*Base Rom updated to April Patched Rom...
*Elite Kernel Reborn Updated to v7.1+ including new SioPlus io, Brightness bar is more smooth in dark mode, hotplug, cluster plug, can be OverClocked with a switch or command... thanks to @cyclon1978
*Aroma Installer added... Let you decide to choose whats best for you... Like kernel mode that you need, apps selection, root method, sound mod, lite mode, raw mode, dt2w off or on, all present in it, choose if you want anything or not...
*Real Kangvip Framework package installer and initializer added, it could be one reason too for forgetting permissions as it control it....
*HiCloud Fix also integrated in rom,
*Choice in Camera selections... Mate 10 Pro, P10+, 7X & P10 Lite cameras added...
*Huawei Swype Keyboard selection added,,, installed if you allow it
*Thats all things in just less than 2GB zip file....
*Used another technique which reduced size of many partitions like cust, system, product, and included more rom devices variants support... cust partition 160mb+ to just 53.3mb including all variants mods... same with other partitions, system is of just 1.6gb...
*All in One package... No patch provided for other devices... Aroma will let you decide your device too...
*Global Immersive Mode to hide navbar & status bar for big display...
*Support for every variant present and any region, EU, meafnaf, spcseas, CN...
2018-01-25 Elite ROM v7.5/7.6:
*Base updated to February Patched ROM
*Base Updated to EMUI5.1.1 as P10 Lite's Latest ROM
*EliteKernelReborn v7+ integrated... Upstreamed to 4.1.48 and Some more features...
*Camera Got some new Features... New Modes hope so... with specific Patch...
*More Free Space in system, so after reboot, Xposed and v4a will appear now...
*Online themes working Now... *if not working, change the default theme in product/hw_oem/xx/xml/hw_default.xml)*
*Magisk 15+,16 Support added... (Will try to see whats wrong with auto otg with Magisk 15+)
*System Ringtones are back... Dont know what was issue with some guys but its working fine for me...will ask testers to report too...
*P10 Lite Support Added...
*Elite Development bootanimation added,,,
*New Classic Dark Theme added...
2018-01-25 Elite ROM v7.4:
*Base ROM updated to January Patched ROM
*Automatic OTG with the New Kernel Elite Kernel Reborn v6+
*Some More features enabled in Kernel and removed SceneAware GPU governer as i think its battery consuming,,,
*HiCloud and Huawei ID 100% working for Every User from any Region
*Elite OTG App Removed as its auto now and some users reported that it didnot get themed as it has diff package name which is not present in themes...
*Huawei Swype Keyboard is Back...
*K-Settings icons resize and desktop mode fixed
*Fixed Files for users other than P9 Lite, some reports device forget permissions on reboot, and i got the reason with logcat from someone on 6X forums... thats why i always ask for logcat to see whats issue actually...
*Xposed updated to v89 without crash (No Support from me on using it)
*New Elite TWRP 3.2.1-0 integrated in K-Settings, you can flash it from K-Settings too
*New Video Review, installation and Usage....
*Oreo Coming with Elite ROM v8.0 Confirmed... Stay Tuned And i got the Full hi6250 Oreo ROM too (Thanks to someone who helped) but Fearing to do with that as this device is More Overclocked than other hi6250 devices.... So waiting for one more device to get it....
2018-01-10 Elite ROM v7.3:
*Base ROM changed to P10+7X FIles... so files of 7X were doing issue like torch etc
*EliteKernelReborn v5+ with/without Brightness Mod will be available
*All features of v7, v7.1 & v7.2 integrated
*Sync issue 100% Fixed
*Homescreen icons issue 100% Fixed
*No More Reboots or Bootloops to eRecovery
*Xposed Upgraded to v89
*StartUp Wizard Added
*New Cool theme added
*New Patches for all Devices
*L21 Patch integrated as this model provide basic files which work on all ROMs as u all reported...
*Bokeh Effect is available as zip now... i spend many hours on it but it gambles... sometime keep working fine and sometime crash
*Online Themes not working... these 2 issues took whole day but not resolved... Normally themes apply and detecting working....
*Thats hopefully now last update for nougat... I assume that no more isue came next... This build is tested by all devices owners...
2018-01-06 Elite ROM v7.2:
*Sync & Homescreen issues Gone.... Reported by 2 testers with me...
*All features of v7 and v7.1 included
*ROM of Honor 7X used as Base.... Latest from Huawei with December security patches...
*Patches from device's own ROMs.... now i think no reboot or that type of issue remained,,,,
*Portrait Mode instead of Bokeh effect... Bokeh removed as it was causing crash for front cam in L21
*video stabilization removed as some users says that it cause cropped videos etc...
*Brightness Mod removed... So new kernel integrated... even though i like that mod but....
*Thats Final Update for Nougat.... No update will Came afterwards,,, (in case any issue came, i will provide OTA patch only)
2017-12-30 Elite ROM v7.1:
*Kangvip Framework Removed...
*FP as navbar removed
*Previous FP actions are back
*No more issue remained
*Google services now perfectly working
2017-12-25 Elite ROM v7:
*Elite Kernel Reborn upstreamed to 4.1.46 and a different GPU Governer "SceneAware" integrated for smoothness...
*P10 ROM updated to Latest version with December Security Patch
*Your Device's Files from Latest device build...
*Security against Krack updated
*3000+ changes done to Kernel
*Knuckle Gestures added
*Smart Cover gesture added
*New Eye Catching Black Theme Added...
*Split Screen Gestures added...
*Use the Navigation bar with Fingerprint
*2 variants available, with K-Settings & without K-Settings
*DeOdexed ROM for better theming purpose...
*Icons Missing and Syncing issue resolved... now 2 ways added for sync, if one disabled, other will keep syncing...
*SuperSU Pre-Installed now as some users did complain of K-Settings crash due to Selinux...
*Separate Kernel with Magisk Support provided...
*Encrypted ROM... no more piracy...
*Fixed ADB Debugging Menu within Phone...
*Different variants for users to avoid bugs for either variant...
*P10 Camera integrated with more Mods on users demand...
*MultiCust ROM... You Can Flash it in EU(C432), MEAFNAF(C185), LA(C605) regions...
*Bokeh Effect added in Camera... (Its only thing which is currently doing issue... Some devices showing and some not,,, gambling
*Camera Night Shot added...
*More VoLTE settings enabled... it should work now...
*Fully Debloated... No bloatware present...
2017-11-19 Elite ROM v6:
*Kangvip Tools integrated in EMUI 5.1
*EliteKernelReborn Upstreamed to 4.1.19
*Xposed Framework fully working with just one tap enable and disable
*Reboot to eRecovery, Recovery, Hot Reboot added...
*Latest and New Google App with Android Wear & Android Auto
*Cool Animations and Top Smoothness you will ever have in any ROM
*On fresh Reboot, 1.5GB/2GB Available... (shown screenshot in telegram group @p9lite4All
*New November security Patches
*SafetyNet is Passed with MagiskSU 14.3 and Xposed Disabled
*Usb Debugging issue fixed Now
*No more missing apps from Launcher or doubling or not disappearing on uninstall
*4G Switch Enabled
*P10 Camera integrated with many options... Mate 9 Pro Camera is also present in Patches...
*Elite OTG integrated
*Karaoke Effect for sounds added... see in sound section in settings....
*Special SuperSU & MagiskSU root methods available,,, Kangvip tools wont work with other roots....
*Huawei Stock Nougat & EliteTWRP present in ROM, flash if you want
*Updated Patches for L31 users
*Encrypted ROM,,, no more Copying files
*New Emoji's without any module.
*No More missing apps
*F2FS filesystem support, You can format your data partition as f2fs for high speed performance.
*LZ4 compression and ZRAM added too in kernel
*init.d Support added
*New gaming libraries
*OTA compatible
2017-10-11 Elite ROM v5.1:
*Most waited and Most required feature, OTG is Enabled....
*Based on Latest P10Lite ROM
*Latest October Security Patch
*Elite OTG Guide for Enabling and Disabling OTG,,,
*android pay works with nfc
*HiCloud Enabled
*Local Huawei Backup Enabled
*Online Theme Manager working,, some reported it not working...
*All bugs solved i guess now,,,
2017-10-11 Elite ROM v5.0:
*System Fully updated to EMUI5.1
*New Settings App with new features
*Vulkan support added systemwide
*Many new Camera tweaks,,, like face recognition and like that,,,
*Magisk Updated to v14.1
*New Kernel v2.0 with many new tweaks
*Security Patch of September
*Virus Scanner built-in
*Every Stock App updated
*No more Bloatwares,
*No app crashing,,, all fixed
*New Stock Launcher
*5x5,6x6 and 6x5 layout and Launcher Rotation added,,,
*New P10Lite Camera
*More Ram Optimized
*Firmware size just 1.5GB
*Support for Many New devices added
*Multitasking improved with EMUI5.1
*Volte Aslo Activated
2017-08-19 Elite ROM v4.0:
1.) Base updated to B389/B390
2.) New Kernel EliteKernelReborn v1.2 included with new features,,, like PPPOE tweaks for wifi, disbaled hw health detect for reserving more ram, and more otg things enabled,,, yet i dont know if otg working or not,,,
3.) Adblocker bug fixed,,, no more facebook or google blocking
4.) Ram scripts added for getting more free ram by disabling zram
5.) f2fs as default FS for data
6.) Boot Animation changed
7.) New 3D Panaroma app added,,, some users says old one didnot work,,,
8.) New TWRP added,,, Now you wont be able to install Elite ROMs with other recoveries..
9.) ROM Theme Updated
10.) No rooting method included now,,, Choose one if you want Root...
Also, you need to set selinux Permissive for opening advance settings,,,
11.) Use EX Kernel Manager and do whatever settings you want for Kernel
12.) VOLTE Also Activated
2017-07-08 Elite ROM v3.0:
Support for 5C added, new patch available for 5C users
1.) Brand New EliteKernelReborn v1.0, new governer, io scheduler,
many new file system supports, fingerprint boosted , f2fs supportm fsync support, many new features
2.) Base of KangV ROM updated to B385 ROM which includes these features,
Added hidden signal WiFi icon option (K settings - status bar settings)
Added the current wifi password ip, etc.,
display all saved wifi password options
Update the new version of SuperSU Repair lock screen power icon misalignment
Fix the lock screen CPU temperature display can not close
Fix the root privilege bug (update the latest su)
Added V4a sound effects (K settings - more settings)
Added list animation effects
Re-modify the desktop layout, row / column icon can be set separately
Added to modify the phone model, version information and other settings
Added the hidden alarm icon option
Added the hidden Bluetooth icon option
Added hidden eye icon options
Added the hidden headset icon option
Added multi-window mode Enabled, you can split the screen display multiple programs,
each program window can be free to adjust the size (restart effective).
In the task list which enabled the function, each program will Added a window icon.
Re-create the screen assistant icon, the default for the green grass color (other ROMer "borrow" please specify the source)
When the horizontal screen is fixed, the navigation bar icon is dislocated
Fixed a problem with the navigation bar icon below 350
Repair lock screen password interface cpu temperature display overlap problem
Fixed lock screen interface operator customization failure problem
Added the game mode, CPU GPU running at full speed without frames
Added the volume key to wake up the screen (K settings - more settings)
Added the global gesture, Added all applications to double-click
Fix the installation of app after the incompatibility problem
Fix root issues are incomplete Repair the navigation bar menu key failure problem Rewrite the K settings, the perfect fusion of style and EMUI5.1
New navigation bar task key long press / click action custom (K settings - navigation bar settings)
New Navigation Bar Hidden Button Long Press Action Custom (K Settings - Navigation Bar Settings)
New navigation bar menu button long press the action custom (K settings - navigation bar settings)
Added status bar time double line display (also show time and date)
3.) Base ROM update to B385
4.) Compatible with all Regions and variants( Gonna remove EU patch )
5.) New SuperSU and New MagiskSU coming for passing SN
6.) New patch in Kernel to bypass SN Check
7.) Fingerprint Boosted,, feel the speed of Fingerprint now
8.) Air calling Gesture added, no need to touch phone for answering calls
9.) 3d panaroma on users demand added
10.) New camera app from Mate Series
11.) Some more useful Apps included
12.) New theme coming
13.) New Logo for TeamElite
14.) New bootanimation
15.) More battery with huge performance with special Governer and Scheduler
16.) No More missing
17.) F2FS filesystem support, You can format your data partition as f2fs for high speed performance.
18.) LZ4 compression and ZRAM added too in kernel
2017-07-08 Elite ROM v2.0:
*Most wanted KangVIP Framework added (thanks to HRT Team and KangV)
*Everything fixed (Error was in permissions)
*New TWRP with data fixed to restore
*SuperSU 2.82 and MagiskSU 13 updated
*Support for Every variant
*Support for L23 variant added
*Dual Speakers Output
*OTA compatibility patch available
*Region Change patch available too
*A mini Xposed Framework in form of K-Framework
*SOme usefull apps installed
*Some more new Libraries for More Power saving
*New Camera App
*New cool Bootanimation
2017-06-22 Elite ROM v1.0:
*initial release
Rooting Methods for Elite ROMs:
SuperSU: SuperSU 2.82 for Elite ROMs
FAQ:
1.) What to do if i have Different Model Number in About Phone ??
Go to Product/hw_oem/ and delete all other folders except your original model name... Reboot
if still same, flash your original oeminfo again nd unlock BL...
2.) What to do if my Notifications for Chrome not working Like resume or pause ??
Go to Battery Settings, and disable the app in lockscreen cleanup which giving that issue... it will be fixed then...
3.) What to do if i have missing files in ROM ??
Surely you have region other than Europe or C432... Now flash oeminfo of C432 and unlock BL again or live without those apps,,,
4.) What to do if i have different ROM name like generic or etc ??
Go to version/special_cust/ and delete all other folders except your original one... Reboot
5.) What to do if deleting System Apps came back or not uninstalling ??
Use SuperSU and mount system rw with terminal,,, after remount, delete app folder using root explorer from system,,,
if it still dont work, mount system in TWRP nd Delete whatever you want to,,, be careful...
6.) What to do if i wanna go back to stock ??
Reboot to EliteTWRP, change data filesystem back to ext4, format data and reboot recovery,,, Now restore stock Rom,,,
7.) What to do if i wanna rollback to MM from Elite ROM ??
flash the OTA patch of your variant(if not available, ask me to provide) and dload rollback pkg and then MM ROM...
8.) What to do if my SafetyNet is not passed ??
Update Magisk to latest beta version, tick Magisk Hide and enable usb debugging...
reserved5
Wow.....I will try that soon...
Wow HassanMirza.... This is so awesome I will flash it soon... Can't wait to test your work .
(Compatible with pra-la1, lx1, lx2, lx3?)
GedeonTaylor said:
Wow HassanMirza.... This is so awesome I will flash it soon... Can't wait to test your work .
(Compatible with pra-la1, lx1, lx2, lx3?)
Click to expand...
Click to collapse
I have tried to make it compatible with all variants... The guy who send me files... I dont know which variant that was...but all are in... If something not worked... Just restore product nd all will be good ...
HassanMirza01 said:
I have tried to make it compatible with all variants... The guy who send me files... I dont know which variant that was...but all are in... If something not worked... Just restore product nd all will be good ...
Click to expand...
Click to collapse
Ok, thank you!!
funny, i just tried to install this rom from the 6x forum. haha
thank you for bringing it to our device!
Uh I wasn't able to install the patch.. It gave me error 6..
Now I'm in, I have emui 5.1 on my pra-lx1 but without sound and play store.. Why is that?
Edit: Installed 6x patch after factory reset, now I have the play store working but I don't know if that is normal that my model number is generic_a15.
Build number is Elite ROM v5.1
Device name ONYX A168
Thank you
HassanMirza01 said:
Elite ROM
For Honor 8 Lite
DONOT COPY MY WORK, Ask for Permissions or Gather it yourself,,,
For Getting the new HyperActive ROM, Go Here,,,
[ROM][LinOS] HyperActive ROM for P9 Lite by HassanMirza01
This ROM is only for Firmwares based on EMUI 5.0 only...
DESCRIPTION:
Hey guyz..... Me Hassan Mirza from Pakistan
Today am here with a new thread and I Have a good news for you....
The New Elite ROM is here and it includes,,,
Features:
*Based on EMUI 5.1(which never released for P9lite)
*Brand New EliteKernelReborn v2.1+ with OTG support enabled
*Based on Latest P10Lite ROM
*Latest October Security Patch
*Elite OTG Guide Included for Enabling and Disabling OTG,,,
*android pay works with nfc
*HiCloud Enabled
*Local Huawei Backup Enabled
*Online Theme Manager working,, some reported it not working...
*All bugs solved i guess now,,,
*New Settings App with new features
*Vulkan support added systemwide
*Many new Camera tweaks,,, like face recognition and like that,,,
*Magisk Updated to v14.1
*New Kernel v2.0 with many new tweaks
*Security Patch of September
*Virus Scanner built-in
*Every Stock App updated
*No more Bloatwares,
*No app crashing,,, all fixed
*New Stock Launcher
*5x5,6x6 and 6x5 layout and Launcher Rotation added,,,
*New P10Lite Camera
*More Ram Optimized
*Firmware size just 1.3GB
*Support for Many New devices added
*Multitasking improved with EMUI5.1
1.) Brand New Kernel,,,
many new file system supports, fingerprint boosted , f2fs support, fsync support, many new features.....
2.) Base of KangV ROM updated to B389/B390 ROM which includes these features,
Added hidden signal WiFi icon option (K settings - status bar settings)
Added the current wifi password ip, etc.,
display all saved wifi password options
Update the new version of SuperSU Repair lock screen power icon misalignment
Fix the lock screen CPU temperature display can not close
Fix the root privilege bug (update the latest su)
Added V4a sound effects (K settings - more settings)
Added list animation effects
Re-modify the desktop layout, row / column icon can be set separately
Added to modify the phone model, version information and other settings
Added the hidden alarm icon option
Added the hidden Bluetooth icon option
Added hidden eye icon options
Added the hidden headset icon option
Added multi-window mode Enabled, you can split the screen display multiple programs,
each program window can be free to adjust the size (restart effective).
In the task list which enabled the function, each program will Added a window icon.
Re-create the screen assistant icon, the default for the green grass color (other ROMer "borrow" please specify the source)
When the horizontal screen is fixed, the navigation bar icon is dislocated
Fixed a problem with the navigation bar icon below 350
Repair lock screen password interface cpu temperature display overlap problem
Fixed lock screen interface operator customization failure problem
Added the game mode, CPU GPU running at full speed without frames
Added the volume key to wake up the screen (K settings - more settings)
Added the global gesture, Added all applications to double-click
Fix the installation of app after the incompatibility problem
Fix root issues are incomplete Repair the navigation bar menu key failure problem Rewrite the K settings, the perfect fusion of style and EMUI5.1
New navigation bar task key long press / click action custom (K settings - navigation bar settings)
New Navigation Bar Hidden Button Long Press Action Custom (K Settings - Navigation Bar Settings)
New navigation bar menu button long press the action custom (K settings - navigation bar settings)
Added status bar time double line display (also show time and date)
3.) Base ROM update to B389/B390
4.) Compatible with all Regions and variants( Gonna remove EU patch )
5.) New SuperSU and New MagiskSU coming for passing SN
6.) New patch in Kernel to bypass SN Check
7.) Fingerprint Boosted,, feel the speed of Fingerprint now
8.) Ex Kernel Manager can be used for top Kernel Settings
9.) 3d panaroma on users demand added
10.) New camera app from Mate Series
11.) Some more useful Apps included
12.) New theme coming
13.) New Logo for TeamElite
14.) New bootanimation
15.) More battery with huge performance with special Governer and Scheduler
16.) No More missing
17.) F2FS filesystem support, You can format your data partition as f2fs for high speed performance.
18.) LZ4 compression and ZRAM added too in kernel
19.) init.d Support added
20.) New gaming libraries
21.) OTA compatible
22.) Many hwcomposer tweaks for better photos and videos recording and viewing
23.) adblocker integrated
24.) Can unbrick any type of Firmware (be sure to be on Nougat atleast)
25.) Audio Encoder has high bitrate
26.) Many new Launcher tweaks
27.) Both recoveries (TWRP and Stock) included in ROM
28.) Private Space, Multiuser, App twin with various social apps added
29.) Double tap to wake device added
30.) Many new Smart assistance options & tweaks
31.) Lite Mod enabled
32.) Inbuild call recorder added
33.) Terminal Emulator added
34.) Beauty shot Libraries added
35.) OTG support added ( Need testers )
36.) XDA, iOS and Galaxy Note themes added
37.) DNS, TCP, Wifi tweaks added
38.) No more Bloatwares
39.) Android Oreo 8.0 Smileys and Emoji's
40.) System Apps Updated
41.) New Advanced Settings for ease
42.) Powerful ROM with Battery calibrated for High Performance
43.) Ram scripts added for getting more free ram by disabling zram
44.) VOLTE Also Activated
No rooting method included now,,, Choose one if you want Root...
New Patches are available, ( See 5th Post )
1.) Region Patch for Elite ROMs (if you come from other region than EU(C432),,, remember to flash it before flashing Elite ROM then once start your phone normally,,, then come back to TWRP and do next steps)
2.) OTA Compatibility Patch for Elite ROMs (if you wanna install an OTA or Update)
Installation Instructions:
1.) Download Elite ROM v5.1 from 2nd Post.
2.) Download Patch for Honor 8 Lite too....
3.) Do Titanium Backup,,, its a cool app
4.) You Must only have Modded TWRP by HassanMirza01 or Latest TWRP recovery ( In 2nd Post too )
5.) Reboot to TWRP and Backup Everything including Boot, Data, System, Product, Vendor, Version (Most important)
6.) Wipe Everything in wipe section (dont wipe sdcard) and Change FileSystem of DATA Partition only to f2fs & FORMAT Data otherwise phone wont boot,,, then reboot twrp and follow next steps if it dont mount data while installing rom, format it again and check filesystem from change fs option,if its f2fs, dont change it again,,,,,
7.) Go to Install Option in TWRP and install the Downloaded Elite ROM v5.1 zip.
9.) Now flash the Honor 8 Lite patch,,,
10.) Reboot with Pray
Youtube Tutorial to install Elite ROM v5
For Rooting, Refer to 4th Post below,,,
This took Countless Months to be build,,, you all know that.......
If you like, Please Support by Donation
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
Take Permission before sharing links or copying to other Forums....
If something is not working and you need support from me, then upload recovery.log of your problem,,, i wont considered your problem as a real problem without log,,, because others saying this as working!!
Changelog in 3rd post...
Contributors:
@HassanMirza01 for doing all this
@OldDroid for giving us the latest TWRP
@Chainfire for Giving us the Power of SuperSU
@Chisetdel31260 for Providing and Proving this idea,,,
@Meticulus for the best Contribution in enabling OTG,,,, Love you bro
ROM OS Version: P10 Lite's EMUI5.1
ROM Kernel: EliteKernelReborn v2.1+
ROM Firmware Required: Bootloader Unlocked / TWRP / EMUI 5.0 Firmware
Based On: EMUI 5.1
Version Information:
Status: Stable
Created on: 2017-07-12
Last Updated on: 2017-10-31
Click to expand...
Click to collapse
Sorry bro but didnt Word for me Just was stuck on Huawei logo
---------- Post added at 06:18 AM ---------- Previous post was at 06:17 AM ----------
HassanMirza01 said:
Elite ROM
For Honor 8 Lite
DONOT COPY MY WORK, Ask for Permissions or Gather it yourself,,,
For Getting the new HyperActive ROM, Go Here,,,
[ROM][LinOS] HyperActive ROM for P9 Lite by HassanMirza01
This ROM is only for Firmwares based on EMUI 5.0 only...
DESCRIPTION:
Hey guyz..... Me Hassan Mirza from Pakistan
Today am here with a new thread and I Have a good news for you....
The New Elite ROM is here and it includes,,,
Features:
*Based on EMUI 5.1(which never released for P9lite)
*Brand New EliteKernelReborn v2.1+ with OTG support enabled
*Based on Latest P10Lite ROM
*Latest October Security Patch
*Elite OTG Guide Included for Enabling and Disabling OTG,,,
*android pay works with nfc
*HiCloud Enabled
*Local Huawei Backup Enabled
*Online Theme Manager working,, some reported it not working...
*All bugs solved i guess now,,,
*New Settings App with new features
*Vulkan support added systemwide
*Many new Camera tweaks,,, like face recognition and like that,,,
*Magisk Updated to v14.1
*New Kernel v2.0 with many new tweaks
*Security Patch of September
*Virus Scanner built-in
*Every Stock App updated
*No more Bloatwares,
*No app crashing,,, all fixed
*New Stock Launcher
*5x5,6x6 and 6x5 layout and Launcher Rotation added,,,
*New P10Lite Camera
*More Ram Optimized
*Firmware size just 1.3GB
*Support for Many New devices added
*Multitasking improved with EMUI5.1
1.) Brand New Kernel,,,
many new file system supports, fingerprint boosted , f2fs support, fsync support, many new features.....
2.) Base of KangV ROM updated to B389/B390 ROM which includes these features,
Added hidden signal WiFi icon option (K settings - status bar settings)
Added the current wifi password ip, etc.,
display all saved wifi password options
Update the new version of SuperSU Repair lock screen power icon misalignment
Fix the lock screen CPU temperature display can not close
Fix the root privilege bug (update the latest su)
Added V4a sound effects (K settings - more settings)
Added list animation effects
Re-modify the desktop layout, row / column icon can be set separately
Added to modify the phone model, version information and other settings
Added the hidden alarm icon option
Added the hidden Bluetooth icon option
Added hidden eye icon options
Added the hidden headset icon option
Added multi-window mode Enabled, you can split the screen display multiple programs,
each program window can be free to adjust the size (restart effective).
In the task list which enabled the function, each program will Added a window icon.
Re-create the screen assistant icon, the default for the green grass color (other ROMer "borrow" please specify the source)
When the horizontal screen is fixed, the navigation bar icon is dislocated
Fixed a problem with the navigation bar icon below 350
Repair lock screen password interface cpu temperature display overlap problem
Fixed lock screen interface operator customization failure problem
Added the game mode, CPU GPU running at full speed without frames
Added the volume key to wake up the screen (K settings - more settings)
Added the global gesture, Added all applications to double-click
Fix the installation of app after the incompatibility problem
Fix root issues are incomplete Repair the navigation bar menu key failure problem Rewrite the K settings, the perfect fusion of style and EMUI5.1
New navigation bar task key long press / click action custom (K settings - navigation bar settings)
New Navigation Bar Hidden Button Long Press Action Custom (K Settings - Navigation Bar Settings)
New navigation bar menu button long press the action custom (K settings - navigation bar settings)
Added status bar time double line display (also show time and date)
3.) Base ROM update to B389/B390
4.) Compatible with all Regions and variants( Gonna remove EU patch )
5.) New SuperSU and New MagiskSU coming for passing SN
6.) New patch in Kernel to bypass SN Check
7.) Fingerprint Boosted,, feel the speed of Fingerprint now
8.) Ex Kernel Manager can be used for top Kernel Settings
9.) 3d panaroma on users demand added
10.) New camera app from Mate Series
11.) Some more useful Apps included
12.) New theme coming
13.) New Logo for TeamElite
14.) New bootanimation
15.) More battery with huge performance with special Governer and Scheduler
16.) No More missing
17.) F2FS filesystem support, You can format your data partition as f2fs for high speed performance.
18.) LZ4 compression and ZRAM added too in kernel
19.) init.d Support added
20.) New gaming libraries
21.) OTA compatible
22.) Many hwcomposer tweaks for better photos and videos recording and viewing
23.) adblocker integrated
24.) Can unbrick any type of Firmware (be sure to be on Nougat atleast)
25.) Audio Encoder has high bitrate
26.) Many new Launcher tweaks
27.) Both recoveries (TWRP and Stock) included in ROM
28.) Private Space, Multiuser, App twin with various social apps added
29.) Double tap to wake device added
30.) Many new Smart assistance options & tweaks
31.) Lite Mod enabled
32.) Inbuild call recorder added
33.) Terminal Emulator added
34.) Beauty shot Libraries added
35.) OTG support added ( Need testers )
36.) XDA, iOS and Galaxy Note themes added
37.) DNS, TCP, Wifi tweaks added
38.) No more Bloatwares
39.) Android Oreo 8.0 Smileys and Emoji's
40.) System Apps Updated
41.) New Advanced Settings for ease
42.) Powerful ROM with Battery calibrated for High Performance
43.) Ram scripts added for getting more free ram by disabling zram
44.) VOLTE Also Activated
No rooting method included now,,, Choose one if you want Root...
New Patches are available, ( See 5th Post )
1.) Region Patch for Elite ROMs (if you come from other region than EU(C432),,, remember to flash it before flashing Elite ROM then once start your phone normally,,, then come back to TWRP and do next steps)
2.) OTA Compatibility Patch for Elite ROMs (if you wanna install an OTA or Update)
Installation Instructions:
1.) Download Elite ROM v5.1 from 2nd Post.
2.) Download Patch for Honor 8 Lite too....
3.) Do Titanium Backup,,, its a cool app
4.) You Must only have Modded TWRP by HassanMirza01 or Latest TWRP recovery ( In 2nd Post too )
5.) Reboot to TWRP and Backup Everything including Boot, Data, System, Product, Vendor, Version (Most important)
6.) Wipe Everything in wipe section (dont wipe sdcard) and Change FileSystem of DATA Partition only to f2fs & FORMAT Data otherwise phone wont boot,,, then reboot twrp and follow next steps if it dont mount data while installing rom, format it again and check filesystem from change fs option,if its f2fs, dont change it again,,,,,
7.) Go to Install Option in TWRP and install the Downloaded Elite ROM v5.1 zip.
9.) Now flash the Honor 8 Lite patch,,,
10.) Reboot with Pray
Youtube Tutorial to install Elite ROM v5
For Rooting, Refer to 4th Post below,,,
This took Countless Months to be build,,, you all know that.......
If you like, Please Support by Donation
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
Take Permission before sharing links or copying to other Forums....
If something is not working and you need support from me, then upload recovery.log of your problem,,, i wont considered your problem as a real problem without log,,, because others saying this as working!!
Changelog in 3rd post...
Contributors:
@HassanMirza01 for doing all this
@OldDroid for giving us the latest TWRP
@Chainfire for Giving us the Power of SuperSU
@Chisetdel31260 for Providing and Proving this idea,,,
@Meticulus for the best Contribution in enabling OTG,,,, Love you bro
ROM OS Version: P10 Lite's EMUI5.1
ROM Kernel: EliteKernelReborn v2.1+
ROM Firmware Required: Bootloader Unlocked / TWRP / EMUI 5.0 Firmware
Based On: EMUI 5.1
Version Information:
Status: Stable
Created on: 2017-07-12
Last Updated on: 2017-10-31
Click to expand...
Click to collapse
Also patch. Zip gave me error 6
GedeonTaylor said:
Uh I wasn't able to install the patch.. It gave me error 6..
Now I'm in, I have emui 5.1 on my pra-lx1 but without sound and play store.. Why is that?
Edit: Installed 6x patch after factory reset, now I have the play store working but I don't know if that is normal that my model number is generic_a15.
Build number is Elite ROM v5.1
Device name ONYX A168
Thank you
Click to expand...
Click to collapse
Thanks for reporting... Always keep the backup save... Can u provide me log of error ?? I said provide logs for issues...
Akam_bad said:
Sorry bro but didnt Word for me Just was stuck on Huawei logo
---------- Post added at 06:18 AM ---------- Previous post was at 06:17 AM ----------
Also patch. Zip gave me error 6
Click to expand...
Click to collapse
Dont quote full op... Where is log ??
HassanMirza01 said:
Thanks for reporting... Always keep the backup save... Can u provide me log of error ?? I said provide logs for issues...
Dont quote full op... Where is log ??
Click to expand...
Click to collapse
I'm new to this! Where can I save it or if it's saved automatically where should I find. Thank you.
GedeonTaylor said:
I'm new to this! Where can I save it or if it's saved automatically where should I find. Thank you.
Click to expand...
Click to collapse
go to twrp,,,, and install that corrupt zip,,, when error came,,, go back to advance settings,,, and copy log to sd card,,, or internal,, then send me that recovery.log file
is the camera working on this rom for the honor 8 lite pra-la1?
reconnaissance said:
is the camera working on this rom for the honor 8 lite pra-la1?
Click to expand...
Click to collapse
Yes it works just like if not better than the original.
Looks Awesome.. I will try that on Saturday...
GedeonTaylor said:
Yes it works just like if not better than the original.
Click to expand...
Click to collapse
thank you for confirming!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V 3.6 - EMUI 8.0 RNE_E8_330_Kvip_V2DONOT COPY MY WORK, Ask for Permissions
Code:
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
with all versions, Mate 10 lite, remember to know your original compilation if at any time you want to return to stock for example RNE-LX3C25 with this data you can return to stock.
This version is based on the official EMUI modification made in the SIRIUZ rom combined with the work of Kangvip KangV & Team HRT for their best KangVIP framework, an Asian rom which was adapted for all European and Latin American versions.
REQUIREMENTS:
- EMUI 8.0.0
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
Guard the rom in an external memory.
Turn off the cell phone press the plus and power buttons until you have the TWRP window
Press WIPE
Press FORMAT DATA
Write the word "yes" without quotes and accept, just do the work
Press BACK to go back several times to the main window.
Press WIPE, then ADVANCE WIPE
Verify that the partition DATA this in the f2fs extension
Mark: Dalvik, cache, data, internal storage, system
IMPORTANT !: do not mark "micro sdcard".
Once you have marked, slide the "swipe to wipe" arrow to clear it.
Go back to the main sale, press INSTALL
Press SELECT STORAGE
Switch to Micro SDCard to find the rom.
Look for the MORFUZ rom and flash
At the end of the installation press "wipe davilk-cache", wait for it to finish.
Reboot system.
Congratulations now will start the rom MORFUZ
now compatible with magisk, if you want to have a magisk root, wait for the system to start normally, then download and flash the Kernel-Ramdisk.zip file by recovery twrp after starting, delete the supersu application.
https://mega.nz/#!5EBlWQDJ!5Sodz7OcUGHulZ7-4rcLW2OlK7sDHDoIC7h_66yX760
It seems that Huawei modified the modem partition in the September-October patch and the MORFUZ kernel does not work incoming and outgoing calls.
-IMPORTANTonly install this module from the root Magisk options if incoming and outgoing calls do not work.
https://mega.nz/#!s3oFgCIK!IFGxeV1UYEDjMGjFzdGR9N5Cx1bVVcqbk-XeRDmQj5Q
Rom Morfuz
https://mega.nz/#!tMpUnSYS!hgLDk0Hq4deAjJSJ9lHNRBdW_Zsx_3EFMv87s8eashw
TWRP Mod by catuva21 - VERSION 2
unzip, the file is automatic
https://mega.nz/#!uD4FlCqL!ERBzP4ZWa2sR8f_wnn15F_cOFCdYVKgfYETjiehQkkQ
TELEGRAM GROUP
https://t.me/joinchat/ERAhfQ8kyF6_iH5nMun5dg
Contributors:
CATUVA21
Credits:
- Openkirin Recovery TWRP
- KangV & Team HRT for their best KangVIP framework
- Alexxx1
- Chisetdel31260
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-06-02
DESCRIPTION ROM MORFUZ - KANGVIPDETAILS OF THE ROM
ROM MORFUZ 3.6
- Mate10 lite base firmware (August security patch).
- New base RNE.356GT.
- MorfuzKernel 2.1 selinux Permissive.
- Turbo GPU.
- Dual speaker activated.
- Added support init.d.
- Added busybox.
- Huawei ID back.
- Boot profile for the Darknnes-Blu_Active kernel within init.d improves performance.
- Change of the MTweaks auditor kernel application.
- Added Lent AR fun camera function.
- Magisk 16.0.
- Increase bitrate of photos and video, improve quality.
- Application of return mails.
- Youtube Mod Updated.
- Screenshot by sliding three fingers.
- New Gboard keyboard.
ROM MORFUZ 3.4
-Base firmware Mate 10 lite(security patch May).
-New kangvip base RNE_E8_330_Kvip_V2.
-Activated Dual Speaker.
-Added DolbyAtmos in Music.
-New Boot logo.
-Added custom watermark for the Mate 10 lite.
-Now without patches.
-Installation mode AROMA-INSTALLER.
-Music: stock or crack.
-Camera: stock, Mate10Pro or P20Pro.
-Root: Magisk or Supersu.
-Navbar, Use the fingerprint sensor as a navigation bar.
-Solid explorer, Kernel Auditor, Quick Reboot.
-MxPlayer.
-Sony Music.
ROM MORFUZ 2.0
- is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications
Removed
Thank's for the rom @CATUVA21, I'll try it today.
Can you try to put viper4android in your next release ? No sound mod work with our emui 8 !
Bro can i install xposed framework in this rom? If no, Please make suport for it
i dnt get the additional sitting of the rom!
gmbengue said:
Thank's for the rom @CATUVA21, I'll try it today.
Can you try to put viper4android in your next release ? No sound mod work with our emui 8 !
Click to expand...
Click to collapse
it does not work viper nor dolby, I will improve the sounds in the next rom
Jackz1922 said:
Bro can i install xposed framework in this rom? If no, Please make suport for it
Click to expand...
Click to collapse
If I look for a compatible one
darckblis said:
i dnt get the additional sitting of the rom!
Click to expand...
Click to collapse
you are sure that you downloaded the morfuz rom, because also publish the rom siriuz
CATUVA21 said:
ROM MORFUZ V 2.0 - EMUI 8.0 KANGVIPHUAWEI MATE 10 LITEKANGVIP P10.342-V3DONOT COPY MY WORK, Ask for Permissions
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
L23C605---L03C605---L21C432---L01C432---L21C900---L01C900---L02C636
L22C636---AL00C00---L21C10---L21C33---L21C185---L01C55
L21C738---L22C569---L22C635---L22C675---L03C178---L02C346
REQUIREMENTS:
- be in EMUI 8.0.0 Mate 10 Lite
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
DETAILS OF THE ROM
- is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications
INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE, then ADVANCE WIPE
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the MORFUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ
Contributors:
CATUVA21
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-05-02
Images
Click to expand...
Click to collapse
Thank you so much. But i can't install Recovery, it said: Failed (remote: partition length get error). Can u help me?
how about 4g is it working in this rom?
Thank you
CATUVA21 said:
ROM MORFUZ V 2.0 - EMUI 8.0 KANGVIPHUAWEI MATE 10 LITEKANGVIP P10.342-V3DONOT COPY MY WORK, Ask for Permissions
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
L23C605---L03C605---L21C432---L01C432---L21C900---L01C900---L02C636
L22C636---AL00C00---L21C10---L21C33---L21C185---L01C55
L21C738---L22C569---L22C635---L22C675---L03C178---L02C346
REQUIREMENTS:
- be in EMUI 8.0.0 Mate 10 Lite
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
DETAILS OF THE ROM
- is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications
INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE, then ADVANCE WIPE
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the MORFUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ
Contributors:
CATUVA21
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-05-02
Images
Click to expand...
Click to collapse
Good afternoon, thank you very much for your contribution.
I had installed another room; but it did not appear the option to turn on the screen when receiving a message, and, they recommended the firmware with the L21C432 compilation, and, since I saw that catuva21 collaborated in its development, it installed it and everything works wonderfully.
Thank you very much.
The only thing is that I do not see the K settings, but I'm fine.
Greetings.
---------- Post added at 08:15 PM ---------- Previous post was at 08:02 PM ----------
CATUVA21 said:
ROM MORFUZ V 2.0 - EMUI 8.0 KANGVIPHUAWEI MATE 10 LITEKANGVIP P10.342-V3DONOT COPY MY WORK, Ask for Permissions
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
L23C605---L03C605---L21C432---L01C432---L21C900---L01C900---L02C636
L22C636---AL00C00---L21C10---L21C33---L21C185---L01C55
L21C738---L22C569---L22C635---L22C675---L03C178---L02C346
REQUIREMENTS:
- be in EMUI 8.0.0 Mate 10 Lite
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
DETAILS OF THE ROM
- is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications
INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE, then ADVANCE WIPE
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the MORFUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ
Contributors:
CATUVA21
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-05-02
Images
Click to expand...
Click to collapse
Question, with this firmware, can I install the stock recovery, and, close the bootloader?
Thank you.
huyle8795 said:
Thank you so much. But i can't install Recovery, it said: Failed (remote: partition length get error). Can u help me?
Click to expand...
Click to collapse
recovery stock or recovery twrp
flamedrops said:
how about 4g is it working in this rom?
Click to expand...
Click to collapse
if it works very well, but if you changed the brand (cust) probably not
gaduarte7 said:
Good afternoon, thank you very much for your contribution.
I had installed another room; but it did not appear the option to turn on the screen when receiving a message, and, they recommended the firmware with the L21C432 compilation, and, since I saw that catuva21 collaborated in its development, it installed it and everything works wonderfully.
Thank you very much.
The only thing is that I do not see the K settings, but I'm fine.
Greetings.
---------- Post added at 08:15 PM ---------- Previous post was at 08:02 PM ----------
Question, with this firmware, can I install the stock recovery, and, close the bootloader?
Thank you.
Click to expand...
Click to collapse
is a modified rom, I do not recommend closing the bootloader, only for stock roms
CATUVA21 said:
recovery stock or recovery twrp
Click to expand...
Click to collapse
RECOVERY TWRP Mod by catuva21. I can't install it. Before that, i installed Recover TWRP mod by KingOfMezi v 3.1.1-0. Thanks!!!!
CATUVA21 said:
is a modified rom, I do not recommend closing the bootloader, only for stock roms
Click to expand...
Click to collapse
Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.
Experience lived and I hope you do not do something that developers do not advise.
Grcias and happy day.
gaduarte7 said:
Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.
Experience lived and I hope you do not do something that developers do not advise.
Grcias and happy day.
Click to expand...
Click to collapse
Thanks for your contribution, it is true that the developers advise not to take certain steps because they have already been the same, and communicates to prevent others from making those mistakes.
Thxs for the rom, any solution for viper install?
Hi. @CATUVA21
When can we expect HWOTA8. And whether it will be possible to Downgrade Nougat.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V 3.0 - EMUI 8.0DONOT COPY MY WORK, Ask for Permissions
Code:
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
with all versions, Mate 10 lite, remember to know your original compilation if at any time you want to return to stock for example RNE-LX3C25 with this data you can return to stock.
This version is based on the official modification of EMUI, activating functions that are in the high-end versions, adding some modifications for their better performance.
REQUIREMENTS:
- EMUI 8.0.0
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
Guard the rom in an external memory.
Turn off the cell phone press the plus and power buttons until you have the TWRP window
Press WIPE
Press FORMAT DATA
Write the word "yes" without quotes and accept, just do the work
Press BACK to go back several times to the main window.
Press WIPE, then ADVANCE WIPE
Verify that the partition DATA this in the f2fs extension
Mark: Dalvik, cache, data, internal storage, system
IMPORTANT !: do not mark "micro sdcard".
Once you have marked, slide the "swipe to wipe" arrow to clear it.
Go back to the main sale, press INSTALL
Press SELECT STORAGE
Switch to Micro SDCard to find the rom.
Look for the MORFUZ rom and flash
At the end of the installation press "wipe davilk-cache", wait for it to finish.
Reboot system.
Congratulations now will start the rom MORFUZ
It seems that Huawei modified the modem partition in the September-October patch and the MORFUZ kernel does not work incoming and outgoing calls.
-IMPORTANTonly install this module from the root Magisk options if incoming and outgoing calls do not work.
https://mega.nz/#!s3oFgCIK!IFGxeV1UYEDjMGjFzdGR9N5Cx1bVVcqbk-XeRDmQj5Q
Rom Siriuz
https://mega.nz/#!BuB2wAyJ!V5SwLTZME3yRLe5XJPCx9fF1-fohLgmI83bUqTUWyXM
TWRP Mod by catuva21 - VERSION 2
unzip, the file is automatic
https://mega.nz/#!uD4FlCqL!ERBzP4ZWa2sR8f_wnn15F_cOFCdYVKgfYETjiehQkkQ
TELEGRAM GROUP
https://t.me/joinchat/ERAhfQ8kyF6_iH5nMun5dg
Contributors:
CATUVA21
Credits:
- Openkirin Recovery TWRP
- Alexxx1
- Chisetdel31260
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-09-23
DESCRIPTION ROM SIRIUZDETAILS OF THE ROM
ROM SIRIUZ 3.0
- Mate 10 lite base firmware (security patch for September).
- Huawei ID integrated and running.
- New bootanimation without sound.
- New bootlogo.
- Percentage activated from start, for other models.
- Activated the font change in themes.
- New topics.
- 7 themes to customize font.
- Camera corrections.
- Slow camera running.
- Youtube advance updated.
- Adaway ad blocker.
- VolTe Activated.
- Dual speaker sound now in Option to choose</*>
- Kernel Morfuz 5.0 EAS.
- permissive selinux without magisk modules.
- upstream 129 +.
- Magisk 17.2
ROM SIRIUZ 2.6
- Mate10 lite base firmware (August security patch).
- MorfuzKernel 2.1 Selinux Permissive.
- Turbo GPU.
- Added support init.d.
- Added busybox.
- Huawei ID back.
- Boot profile for the Darknnes-Blu_Active kernel within init.d improves performance.
- Change of the MTweaks auditor kernel application.
- Added Lent AR fun camera function.
- Magisk 16.7.
- Increase bitRate of photos and video, improve quality.
- Application of return mail.
- Youtube Mod Updated.
- Screenshot by sliding three fingers.
- New Gboard keyboard.
- Deactivated operator name.
ROM SIRIUZ 2.4
- Base firmware Mate10 lite(security patch May)</*>
- Activated Dual Speaker</*>
- Added DolbyAtmos in Music</*>
- New Boot logo</*>
- Added custom watermark for the Mate10 lite</*>
- Now without patches</*>
- Installation mode AROMA-INSTALLER</*>
- Music: stock or crack</*>
- Camera: stock, Mate10Pro or P20Pro</*>
- Root: Magisk or Supersu</*>
- Change some icons in the status bar</*>
- Navbar, Use the fingerprint sensor as a navigation bar</*>
- Solid explorer, Kernel Auditor, Quick Reboot</*>
- MxPlayer</*>
- Sony Music</*>
<b><#selectbg_g>NOTICE ROOT MAGISK</#></b>
- If you select root magisk the OEM will be deactivated</*>
- enter developer options and activate the OEM</*>
ROM SIRIUZ 2.0
- is based on the last update of RNE-L21C432 (8.0.0) (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
Removed
Question
CATUVA21 said:
ROM SIRIUZ V 2.0 - EMUI 8.0HUAWEI MATE 10 LITEDONOT COPY MY WORK, Ask for Permissions
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
L23C605---L03C605---L21C432---L01C432---L21C900---L01C900---L02C636
L22C636---AL00C00---L21C10---L21C33---L21C185---L01C55
L21C738---L22C569---L22C635---L22C675---L03C178---L02C346
REQUIREMENTS:
- be in EMUI 8.0.0 Mate 10 Lite
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
DETAILS OF THE ROM
- is based on the last update of RNE-L21C432 (8.0.0) (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE, then ADVANCE WIPE
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the SIRIUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ
Contributors:
CATUVA21
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-05-02
Images
Click to expand...
Click to collapse
:fingers-crossed: Good evening, I would like to know if they took the ROM FLASHEABLE STOCK FOR MATE 10 LITE with OREO 8.0.
Thank you.
gaduarte7 said:
:fingers-crossed: Good evening, I would like to know if they took the ROM FLASHEABLE STOCK FOR MATE 10 LITE with OREO 8.0.
Thank you.
Click to expand...
Click to collapse
Please, Stock Recovery Oreo for Mate 10 Lite.
Thank you.
Change language
Huawei music app, how i can change language? sorry my bad english
Can anyone post here stock recovery C432?
Any Bugs? Is this good for a daily driver?
Does it have VoLTE? I live in US and in my phone no 4G networks showing that means my phones 4G band is different ,its brought from saudi
Hi, I wanted to know to get back to the original file Finder as I have to do Just flash with twrp or do the rebranding procedure Thanks
Can you add touchwiz to the rom from samsung galaxy s9
This works for RNE-L03C212? Does not appear in the compatible devices list.
can you make a flashable zip stock Boot logo and animation?
CATUVA21 said:
ROM SIRIUZ V 2.0 - EMUI 8.0HUAWEI MATE 10 LITEDONOT COPY MY WORK, Ask for Permissions
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
L23C605---L03C605---L21C432---L01C432---L21C900---L01C900---L02C636
L22C636---AL00C00---L21C10---L21C33---L21C185---L01C55
L21C738---L22C569---L22C635---L22C675---L03C178---L02C346
REQUIREMENTS:
- be in EMUI 8.0.0 Mate 10 Lite
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
DETAILS OF THE ROM
- is based on the last update of RNE-L21C432 (8.0.0) (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE, then ADVANCE WIPE
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the SIRIUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ
Contributors:
CATUVA21
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-05-02
Images
Click to expand...
Click to collapse
thanks for the rom, but can i use xposed on this rom? because i always got boot loop every time i flashed xposed on magisk. im running RNE-L22
Tsidkenu23 said:
thanks for the rom, but can i use xposed on this rom? because i always got boot loop every time i flashed xposed on magisk. im running RNE-L22
Click to expand...
Click to collapse
I have not tested exposed, but some if they could install, but not flasheable, just install the xposed application and through the application it downloads and flashes automatically, but not if it works correctly
looks promising, im installing it now. will report back
Edit: The rom appears to be running very slow on my device. after rebooting its better
i cant do the 3 rd step which is flash kernel and ramdisk.. when im pres enter, but the system command prompt reply the system cannot find the path specified.. please help me.. im installed it into my nova 2i rne-l22...
Is the camera working 100%?
rom update
dual speakers why not working????