Related
Hi,
I am not sure if this problem is related to
- Mobile Phone
- Android Auto
- Car
So my question is: Does someone already has a working Android Auto connection with a car´s radio with this phone?
If so, I will continue this in Android Auto section.
Today I upgraded build to: MHA-L29C432B138
Car/Radio: Opel Astra K (MY2017)/ Intellilink R4.0
The connection could be established. But screen of car stays black. When touching screen or saying "OK Google" it accepts voice command.
My Mate 7 works perfectly...
Best regards,
Robert
no idea... working oke on my golf 7 2015 mib2 unit..
u using original cable... i also try ith lumia 950 cable, also usb-c but random disconnecting with this cable.
P9 is also working. I guess the problem is Mate 9.
Mine works with Pioneer but doesn't work well. It Will not play anything already downloaded to the device unless you connect phone to head unit forest and actually play something through Bluetooth first and THEN connect it. All permissions are set correctly etc. And what is with having to give it permission to use the data on the phone EVERY SINGLE TIME?
US model working flawlessly with 2016 VW Golf R... I did have to reinstall audible and spotify after connecting the first time in order for them to show up in the menu, but other than that, no issues with connecting, audio skips, etc. Very happy! Samsung S7 Edge was unusable with AA.
Got the International Mate 9 Pro and AA is working perfectly fine with my Pioneer 4100nex. I'm on the latest Pioneer firmware 1.09 if that helps anyone.
Works like a charm
What settings do you guys have? Do you have usb debugging or anything like that enabled in dev settings? Every time I hook up it comes up with the dialogue box to enable data access. Whether I click enable or not it will not play anything stored on phone. I've had this confirmed by Huawei Australia. They couldn't get it going either.
I have all the correct permissions set for all apps including android auto.
Any hints?
MontAlbert said:
What settings do you guys have? Do you have usb debugging or anything like that enabled in dev settings? Every time I hook up it comes up with the dialogue box to enable data access. Whether I click enable or not it will not play anything stored on phone. I've had this confirmed by Huawei Australia. They couldn't get it going either.
I have all the correct permissions set for all apps including android auto.
Any hints?
Click to expand...
Click to collapse
In developer options I do have "Always prompt when connecting to USB" turned off and "Select USB Configuration" set to MTP. I don't get prompted for anything on the phone. USB Debugging is off. I don't try to play anything from USB though, just use AA, Spotify, and Audible.
Other than that, I do have an Automagic script that when car ui mode is entered, the screen gets turned on, Waze is launched, slide to unlock keyguard is dismissed, and wifi is turned off. I won't need to do most of this when Waze is AA compatible, but until then, I can't live without it. This script works about 90% of the time, still haven't finished tweaking it for 100% success. Worst case, I have to turn the phone back on, swipe down on the notification panel, then select waze from "Notification Shortcuts".
bwillet said:
In developer options I do have "Always prompt when connecting to USB" turned off and "Select USB Configuration" set to MTP. I don't get prompted for anything on the phone. USB Debugging is off. I don't try to play anything from USB though, just use AA, Spotify, and Audible.
".
Click to expand...
Click to collapse
Seems this is possibly the issue. Whenever I connect usb it automatically changes the usb connection type to charge only. Won't let me change it to mtp, audio or anything else. Wonder if there is a hidden setting somewhere in emui that does this... Tried it in dev settings. Same issue. Charge only
MontAlbert said:
Seems this is possibly the issue. Whenever I connect usb it automatically changes the usb connection type to charge only. Won't let me change it to mtp, audio or anything else. Wonder if there is a hidden setting somewhere in emui that does this... Tried it in dev settings. Same issue. Charge only
Click to expand...
Click to collapse
I couldn't find anything else that I changed that seems relevant. I'm just using a standard USB to USB-C cable (Anker PowerLine+) plugged into the USB port in my VW Golf.
Did you change both of those settings I mentioned? If so, when you go back into dev settings does "Select USB Configuration" still say MTP, or did it default back to Charge Only? Maybe you have to reboot after? dunno...
bwillet said:
I couldn't find anything else that I changed that seems relevant. I'm just using a standard USB to USB-C cable (Anker PowerLine+) plugged into the USB port in my VW Golf.
Did you change both of those settings I mentioned? If so, when you go back into dev settings does "Select USB Configuration" still say MTP, or did it default back to Charge Only? Maybe you have to reboot after? dunno...
Click to expand...
Click to collapse
I changed those 2 you said but as soon as I plug in the Huawei cable (thought maybe it needed the Huawei cable) it changes itself to charging...
I'll keep looking into it. Thanks for your help though. This is obviously the issue.
I'm having the same issue in the US version on a 2017 VW GLI. My last two phones worked flawlessly.
MontAlbert said:
Seems this is possibly the issue. Whenever I connect usb it automatically changes the usb connection type to charge only. Won't let me change it to mtp, audio or anything else. Wonder if there is a hidden setting somewhere in emui that does this... Tried it in dev settings. Same issue. Charge only
Click to expand...
Click to collapse
Mine goes to charge only as well however my android auto is working perfectly.
It connects and on the phone side it seems fine but the head unit screen goes black and doesn't do anything.
Hi.. Is there anyway to prevent WhatsApp notifications showing up in android auto?
Mate 9 L29 - B156 in a Seat Ibiza 2016.
Android auto working fine.
You have reviewed android permissions, or if Google app or maps are set to close when the screen is turned off And enable activation?
In my old zenfone 3 that was the problem
Did any of you guys tried to enable the USB debugging mode?
Emil Borconi said:
Did any of you guys tried to enable the USB debugging mode?
Click to expand...
Click to collapse
JA! This was first thing, but no success.
I am also disappointed by Huawei customer care. They just point at Google and say it is not their fault.
Does anyone know how to log / where to find the log when "Force logging" is enabled in dev options in AA?
debart said:
JA! This was first thing, but no success.
I am also disappointed by Huawei customer care. They just point at Google and say it is not their fault.
Does anyone know how to log / where to find the log when "Force logging" is enabled in dev options in AA?
Click to expand...
Click to collapse
Open android auto, go to about, tap the Android auto title 10 times, you will see a toast saying your developer. Now from the 3 dotted menu on the right select developer options locate force logging and make sure it's enabled
Hi,
Did somebody try to use an android auto function? My car (Peugeot 308SW 2018) and the phone not connecting with latest (8.1.0) android version. I tried to enable an USB debugging (as workaround recommendation), but nothing changed...
Have you other idea or working solution?
thx!
rawen69 said:
Hi,
Did somebody try to use an android auto function? My car (Peugeot 308SW 2018) and the phone not connecting with latest (8.1.0) android version. I tried to enable an USB debugging (as workaround recommendation), but nothing changed...
Have you other idea or working solution?
thx!
Click to expand...
Click to collapse
Yes, it works perfectly in my mid 2017 Kia Cee'd SW. Check if you have android auto enabled(i have the option to disable it and the apple car play). Also, the usb cable is working properly when connecting to a pc?
At the car side is enabled, at phone side i didnt found any additional options...
The best result was the android auto icon at phone appears and disappears continously with 2-3 different cables.
Is it possible the car head unit firmware not compatible with N7P latest SW version?
rawen69 said:
At the car side is enabled, at phone side i didnt found any additional options...
The best result was the android auto icon at phone appears and disappears continously with 2-3 different cables.
Is it possible the car head unit firmware not compatible with N7P latest SW version?
Click to expand...
Click to collapse
Doubt it. The car is from this year, it seems unlikely(to me) that the firmware wasn't up to date.
Stupid question, you have the android auto app installed on the phone right? Android has a Car Mode but to use android auto you need to install the app 1st(https://play.google.com/store/apps/details?id=com.google.android.projection.gearhead&hl=en). If the link says that you have no compatible device, download the latest version from here(https://www.apkmirror.com/apk/google-inc/android-auto/)
For almost a year I thought my head-unit wasn't up to date as the android auto would freeze, the app would say that the head-unit wasn't up to date, waze would display random artefacts, etc.
Now with the N7p it is butter smooth, no funky stuff and way more responsive that when I was trying to use it with my Redmi 4 Prime(same cable but with a micro-b to usb c adapter)...
No issues with AA in Seat Ateca 2018.
Everything works like a charm.
For phonecalls, you need to select default sim first, otherwise the call hangs on a sim selection prompt on the phone.
I write to nokia support and they send:
- clear the bluetooth cache
- do a soft reset
after this steps working fine...
what is Bluetooth cache?
Tequila.CZ said:
what is Bluetooth cache?
Click to expand...
Click to collapse
You found here, how to clear: http://support.hereplus.me/hc/en-us/articles/115003497328-Clearing-your-Bluetooth-Cache-Android-/
Do you install android auto app on your smartphone ? some lands doesn't have android auto on the play store, so you need to download manually on apk mirror web site (arm64 version)
A good quality cable is also needed.
I'm having similar issues.
This phone won't work in both my VW cars.
If I clear all settings it works fine.
I get to my destination, unplug and then when I head out on my next trip it doesn't. Just a blank screen on the head unit and the phone has the green screen saying launch Android Auto on the head unit.
Tried the BT cache clearing as above. Will try a factory reset of the phone shortly too otherwise wait for pie and if still no go then sell the phone which I will miss
Though can't work without Android Auto now
It is definitely problem with Nokia 7 plus. In my car it connect and after few minutes black screen and solution is only disconnect and connect again.
matonka007 said:
It is definitely problem with Nokia 7 plus. In my car it connect and after few minutes black screen and solution is only disconnect and connect again.
Click to expand...
Click to collapse
I've found the bluetooth with my N7P poor anyway. This is my second one and the same as the first.
All HMD will do is send you a list of the bluetooth protocols they support.
So you may need to change your car ?
My 7+ works perfectly now.
Enable USB debugging and disable the extreme power saving settings.
Each time I get into my car and connect my OnePlus 6 via USB, I have to change the USB connection type on the phone to MTP in order for Android Auto to connect. Once I change the setting and it connects, Android Auto runs well and stays connected until I turn off my car. Without changing the USB setting, the phone will stay in charging mode and Android Auto does not connect.
My car is a 2016 Honda Accord EX and I am using an OEM cable. The phone is rooted, developer options are enabled, and USB debugging is off. When I go into the developer options and try to change the default USB connection mode to something other than charging, the setting change doesn't seem to take.
Is there a way to automatically use MTP mode when I connect the phone to my car? Or something else I can do to get it connected without having to change a setting on my phone each time I get in my car?
I would clear data, force stop, and reinstall Android Auto. I use it every day and have no problems at all. Connects automatically.
My HTC M9 had no end of problems with AA. Would not connect half time time unless I replugged it in, and the voice-to-text function was buggy as hell. My OP6 is smooth as silk.
Thanks. I tried that and even deleted the phone from my car. It didn't work. I had to change the mode to mpt to get it to do the initial connection. Same for reconnecting. Doh!
Do you use Tasker? I wrote a task that will automatically change the setting to MTP. It requires the Tasker plugin - AutoInput as well.
I do have tasker. How do I set it up to do that? Thanks.
theman22 said:
I do have tasker. How do I set it up to do that? Thanks.
Click to expand...
Click to collapse
So I actually created two different profiles/tasks.
1) Detects when USB power is plugged and then opens developer settings and scrolls automatically to usb configuration and makes the change. This profile/task requires the plugin AutoInput.
2) Uses AutoNotification to detect when there is a notification in your tray stating that the device is being charged. Then it will use AutoInput again to click on the notification and change it to 'USB for file transfer'.
I only attached #1. Import it into to Tasker and see if that works. If not, I can add the second option.
theman22 said:
Each time I get into my car and connect my OnePlus 6 via USB, I have to change the USB connection type on the phone to MTP in order for Android Auto to connect. Once I change the setting and it connects, Android Auto runs well and stays connected until I turn off my car. Without changing the USB setting, the phone will stay in charging mode and Android Auto does not connect.
My car is a 2016 Honda Accord EX and I am using an OEM cable. The phone is rooted, developer options are enabled, and USB debugging is off. When I go into the developer options and try to change the default USB connection mode to something other than charging, the setting change doesn't seem to take.
Is there a way to automatically use MTP mode when I connect the phone to my car? Or something else I can do to get it connected without having to change a setting on my phone each time I get in my car?
Click to expand...
Click to collapse
God, it's annoying. It happens in all the modern androids. My S8+ 5T and now my OP6
My OP6 has no issues connecting to my Pioneer AVH-2330NEX. Just plug it in and AA starts right up. Bluetooth is pretty reliable as well, which is how I connect most of the time.
It usually takes a minute or 2 for my AA to come up on my screen (2017 Charger). Once it's connected, it runs super smooth. But I wish it was a little more responsive once I plug in the cable. Now I have to wait for it to come up before I can launch any app (Maps, Spotify, etc)
I"m going to see if the MTP method makes it connect "faster". If so, I'll look into building a Tasker Profile as well like @azsl1326
azsl1326 said:
So I actually created two different profiles/tasks.
1) Detects when USB power is plugged and then opens developer settings and scrolls automatically to usb configuration and makes the change. This profile/task requires the plugin AutoInput.
2) Uses AutoNotification to detect when there is a notification in your tray stating that the device is being charged. Then it will use AutoInput again to click on the notification and change it to 'USB for file transfer'.
I only attached #1. Import it into to Tasker and see if that works. If not, I can add the second option.
Click to expand...
Click to collapse
This is really close. I had to add one more scroll down step in the developer menu and change the mode to MIDI. It doesn't work 100% though. If the developer options menu is already open, it reopens wherever it was and sometimes the scroll down goes too far... Perhaps there is a more stable way to do this?
Attached is my modified tasker profile.
theman22 said:
This is really close. I had to add one more scroll down step in the developer menu and change the mode to MIDI. It doesn't work 100% though. If the developer options menu is already open, it reopens wherever it was and sometimes the scroll down goes too far... Perhaps there is a more stable way to do this?
Attached is my modified tasker profile.
Click to expand...
Click to collapse
I have another profile that uses AutoNotifications to detect when there is a notification in the tray regarding USB charging. It will then use AutoInput to select this option from the notification tray and change it to 'Transfer files'. I can post that here if you are interested. It does require two paid plugins.
You could add a task to clear recents before running the AndroidAuto task - that way it should ensure that Developers Option screen is no longer active.
azsl1326 said:
I have another profile that uses AutoNotifications to detect when there is a notification in the tray regarding USB charging. It will then use AutoInput to select this option from the notification tray and change it to 'Transfer files'. I can post that here if you are interested. It does require two paid plugins.
Click to expand...
Click to collapse
If it works reliably, I'm interested.
theman22 said:
If it works reliably, I'm interested.
Click to expand...
Click to collapse
Here you go. I think both of these Auto plugins have free trials, so you should be able to try it before you buy it.
Disabling USB debugging has helped me
theman22 said:
Each time I get into my car and connect my OnePlus 6 via USB, I have to change the USB connection type on the phone to MTP in order for Android Auto to connect. Once I change the setting and it connects, Android Auto runs well and stays connected until I turn off my car. Without changing the USB setting, the phone will stay in charging mode and Android Auto does not connect.
My car is a 2016 Honda Accord EX and I am using an OEM cable. The phone is rooted, developer options are enabled, and USB debugging is off. When I go into the developer options and try to change the default USB connection mode to something other than charging, the setting change doesn't seem to take.
Is there a way to automatically use MTP mode when I connect the phone to my car? Or something else I can do to get it connected without having to change a setting on my phone each time I get in my car?
Click to expand...
Click to collapse
I replied to you in the other thread, OnePlus 6 and Android Auto
But to fix your issue, this MIGHT be the solution for you specifically. Setup an appointment with your local Honda dealer, and ask to get Technical Service Bulletin 16-059 installed.
This fixed my issue for my '16 Accord when AA wasn't working at all with my PH-1
Or you can just simply choose this option to mtp as default on USB connection. It's in developer settings.
Berlifan said:
Disabling USB debugging has helped me
Click to expand...
Click to collapse
I have read about this and disabled USB debugging. It does sound like it works for some users but it didn't make a difference for me, unfortunately...
surface13 said:
I replied to you in the other thread, OnePlus 6 and Android Auto
But to fix your issue, this MIGHT be the solution for you specifically. Setup an appointment with your local Honda dealer, and ask to get Technical Service Bulletin 16-059 installed.
This fixed my issue for my '16 Accord when AA wasn't working at all with my PH-1
Click to expand...
Click to collapse
I will go ahead and do this. Thank you for the suggestion!
Joyarup said:
Or you can just simply choose this option to mtp as default on USB connection. It's in developer settings.
Click to expand...
Click to collapse
I've tried this as well. The setting does not seem to stick. It sometimes works the next time I plug my phone into my car but the 2nd time I plug my phone in, the default in developer settings is back to USB.
azsl1326 said:
Here you go. I think both of these Auto plugins have free trials, so you should be able to try it before you buy it.
Click to expand...
Click to collapse
This did not work when I tried it today. I'm guessing there is some difference on my phone that would require the setting to be tweaked. I'll look into this.
theman22 said:
I have read about this and disabled USB debugging. It does sound like it works for some users but it didn't make a difference for me, unfortunately...
I will go ahead and do this. Thank you for the suggestion!
I've tried this as well. The setting does not seem to stick. It sometimes works the next time I plug my phone into my car but the 2nd time I plug my phone in, the default in developer settings is back to USB.
Click to expand...
Click to collapse
Didn't know that..
I had the same issue with a VW Passat 2016, and the solution was to enable USB debugging, and after that everything is working ok.
Unfortunately I'm facing another issue. If I'm initiating a call with the phone connected to AA, usually by voice command, the sound is routed randomly on the headset, speaker and sometime to Bluetooth.
Every time I have to set manually from phone app in AA on the car screen to route the sound to Bluetooth, and this is annoying. . Do you experience this issue as well?
Thanks!
Got my Pixel 3 XL yesterday and absolutely love it...
Just in case anyone else experiences issues I thought I would post this - did an online chat with Google and they think it might be a bug in the OS.
Connecting to my PC or Car, the device was showing the USB options when you swipe down for notifications permanently on Charging Only. Even changing this from that drop down had no effect. I could see the device on my PC but unable to view files/folders and unable to copy anything to the device. Similar symptoms in my car, the device would charge fine but no matter what I did it wouldn't connect to my Infotainment System.
To fix this I had to enable Developer Options, scroll down to Networking and there is a "Default USB configuration" setting. This was set to "No data transfer", I changed it to "File transfer" and rebooted and now everything works fine.
Hopefully this might help others :good:
Does your phone fast charge while using Android Auto?
I don't think so, how can I check that.
I've only had the device a couple of days now but have noticed that when I'm using it in the car running Google Maps and streaming music via AA it still seems to charge.
Doing the same on my original Pixel XL I would loose 1-2% over about 30-40 mins, not sure if that's just because the battery was starting to deteriorate.
Thanks, but for some reason that didn't work for me. Tried this with and without USB debugging and car is just not seeing the phone for AA, but charges it fine. Also tried 4 different cables just in case, if I plug in an S8+ to any one of those cables it works perfectly with the car.
[deleted, "wrong thread" mistake]
I have been experiencing issues connecting to devices over Bluetooth. Sometimes it just works, other times it doesn't work at all, and some times it kinda works but not right.
All of these issues are resolved by restarting the phone, but that isn't a solution because the issue comes back.
3 Devices I have been having issues with
1. S Pen - Sometimes it won't connect to the phone, I get an "S-Pen Missing" message and it will not connect. If I t ry to connect to it manually via nRF Connect (The Nordic Semiconductors Bluetooth App) it tells me that the BLE device has a GATT error. It happens semi-randomly but I can always make it happen by doing #2
2. Car Stereo - This is the weird one, it will connect and play music, but it will not do "calls" if I connect to Discord it won't recognise the car as a Bluetooth device it can route to.
3. Raspberry Pi - This one it appears it will connect to ONCE, and then after a disconnect it will not connect again.
Again, each of these can be fixed by restarting the device, but they happen again after a while. The pen & RPi use BLE, I don't know what the car uses for calls.
Turn off global power management completely in Device Care.
Network reset, reboot and clear system cache from the boot menu.
Ok, I've done a network reset, and cleared the cache partition. I checked Device Care for something like global power management, and I couldn't find anything. Most of the pwm settings are off except the "optomise daily" setting.
I'll let you know later if I have the same issue again.
These, this is a N10+ running on Pie.
To check if you have disabled global power go to Developer options>standby apps, all buckets should show as active otherwise power management is enable.
KindarConrath said:
I have been experiencing issues connecting to devices over Bluetooth. Sometimes it just works, other times it doesn't work at all, and some times it kinda works but not right.
All of these issues are resolved by restarting the phone, but that isn't a solution because the issue comes back.
3 Devices I have been having issues with
1. S Pen - Sometimes it won't connect to the phone, I get an "S-Pen Missing" message and it will not connect. If I t ry to connect to it manually via nRF Connect (The Nordic Semiconductors Bluetooth App) it tells me that the BLE device has a GATT error. It happens semi-randomly but I can always make it happen by doing #2
2. Car Stereo - This is the weird one, it will connect and play music, but it will not do "calls" if I connect to Discord it won't recognise the car as a Bluetooth device it can route to.
3. Raspberry Pi - This one it appears it will connect to ONCE, and then after a disconnect it will not connect again.
Again, each of these can be fixed by restarting the device, but they happen again after a while. The pen & RPi use BLE, I don't know what the car uses for calls.
Click to expand...
Click to collapse
Are those the only three devices you connect via BT? What other apps do you use that need to use BT (i.e. Galaxy Wear, Apple Music, etc.).
You mentioned "Nordic Semiconductors Bluetooth App." I looked it up. Why do you need a third party generic BLE connecting app? It seems to me that could be the problem. You shouldn't need a third-party app to connect your BLE devices. The S22U's native pairing will work with any BT device that adheres to BT standards.
Try uninstalling the nRF Connect app and see what happens.
The only other Bluetooth devices I have are other in-house hardware, running on SiliconLabs BGM13P chips or NRF52840 chips...
The NRF app isn't a replacement for your bluetooth pairing app, its a debugging app... it can connect to BLE devices and show their GATT profiles, update devices that have Nordic's OTA update code and copy a devices GATT profile to act as a BLE Server.
We use it for testing and debugging.
KindarConrath said:
The only other Bluetooth devices I have are other in-house hardware, running on SiliconLabs BGM13P chips or NRF52840 chips...
The NRF app isn't a replacement for your bluetooth pairing app, its a debugging app... it can connect to BLE devices and show their GATT profiles, update devices that have Nordic's OTA update code and copy a devices GATT profile to act as a BLE Server.
We use it for testing and debugging.
Click to expand...
Click to collapse
Ok. I recommend uninstalling nRF Connect anyway. If anything, to rule out the app. How old is your car and the Raspberry Pi? Even though BT 5.2 is backwards compatible, sometimes older BT devices won't work with newer devices. That doesn't account for the S Pen issue though.
I uninstalled nRF connect, and changed all the settings you both recommended. Exactly the same behaviour when I went to leave work. My car stereo would do music but not calls, then when I restarted my phone, it worked. Then when I got home, my S Pen would not connect to my phone, then I restarted my phone and it worked.
Its not a problem of not being compatible, its a problem of something stops working.
Please also note that these devices worked fine together in the past. I am concered that it is either a change made by an update or a Bluetooth chip that is faulty....
OP- Have you debloated at all and if so maybe you've removed something relevant that might be causing these issues?
No, stock image, no OS modification beyond the things that Samsung offers (GoodLock and Stock customisation)
I have our in-house apps for interacting with our equipment (over Bluetooth) installed, but #1 they shouldn't affect anything if they are not open and #2 they don't do this to ANY of our other test equipment.
I would just like to say, that I appreciate the assistance that you are all offering! I have used many forums over the years when looking for support on things and I rarely find a place that is more ready to try and help than XDA forums!
KindarConrath said:
I have been experiencing issues connecting to devices over Bluetooth. Sometimes it just works, other times it doesn't work at all, and some times it kinda works but not right.
All of these issues are resolved by restarting the phone, but that isn't a solution because the issue comes back.
3 Devices I have been having issues with
1. S Pen - Sometimes it won't connect to the phone, I get an "S-Pen Missing" message and it will not connect. If I t ry to connect to it manually via nRF Connect (The Nordic Semiconductors Bluetooth App) it tells me that the BLE device has a GATT error. It happens semi-randomly but I can always make it happen by doing #2
2. Car Stereo - This is the weird one, it will connect and play music, but it will not do "calls" if I connect to Discord it won't recognise the car as a Bluetooth device it can route to.
3. Raspberry Pi - This one it appears it will connect to ONCE, and then after a disconnect it will not connect again.
Again, each of these can be fixed by restarting the device, but they happen again after a while. The pen & RPi use BLE, I don't know what the car uses for calls.
Click to expand...
Click to collapse
I've seen the issue of the spen disconnecting but only a couple of times and the issue worked itself out within a couple of minutes with me not having to do anything.
I've also have had a couple of wonky issues when connecting a new Samsung phone to my car. I've narrowed down my issue to the fact that when I transfer my data & settings via Samsung smart switch, it includes the details of my Bluetooth pairings. To fix it, I have to go in and delete my Bluetooth phone settings from the car and from my phone and re-pair them.
Rubby1025 said:
I've seen the issue of the spen disconnecting but only a couple of times and the issue worked itself out within a couple of minutes with me not having to do anything.
I've also have had a couple of wonky issues when connecting a new Samsung phone to my car. I've narrowed down my issue to the fact that when I transfer my data & settings via Samsung smart switch, it includes the details of my Bluetooth pairings. To fix it, I have to go in and delete my Bluetooth phone settings from the car and from my phone and re-pair them.
Click to expand...
Click to collapse
As cool as I think Smart-Switch is as a program, I actually never use it when moving from one phone to another. The junk that Google drags with me from one phone to the next is already too much, I like to use a new device as a chance to do some housecleaning. So no old-data oddities here.
KindarConrath said:
I uninstalled nRF connect, and changed all the settings you both recommended. Exactly the same behaviour when I went to leave work. My car stereo would do music but not calls, then when I restarted my phone, it worked. Then when I got home, my S Pen would not connect to my phone, then I restarted my phone and it worked.
Its not a problem of not being compatible, its a problem of something stops working.
Please also note that these devices worked fine together in the past. I am concered that it is either a change made by an update or a Bluetooth chip that is faulty....
Click to expand...
Click to collapse
Hmmm.. Ok. You're probably right about the suspect causes. I know there is a code you can dial to get into diagnostic mode, I just don't know what it is.
The only other option you can try (as a last resort) is to factory reset it. If it is update caused, a factory reset MAY fix it. If you take it to a service center, send it in for repairs, or do a warranty replacement, they're going to factory reset it, or have you reset it.
have you tried running diagnostics in device care ?
or check with this dc
android
Bluetooth test*#*#232331#*#*
samsung
Bluetooth Test Mode*#232331#
I still haven't done a factory reset, but I continue to have the issue.
I have run the BT Test in device care, it always reports good.
I tried the codes, neither of them work as the first one is for vanilla android and the second is for older versions of Samsung firmware.
I've tried completely unpairing from the car radio and re-pairing, disconnecting and connecting from the other device to no avail.
KindarConrath said:
I still haven't done a factory reset, but I continue to have the issue.
I have run the BT Test in device care, it always reports good.
I tried the codes, neither of them work as the first one is for vanilla android and the second is for older versions of Samsung firmware.
I've tried completely unpairing from the car radio and re-pairing, disconnecting and connecting from the other device to no avail.
Click to expand...
Click to collapse
I'm not entirely sold on the idea that it is a hardware fault. It could be a hardware limitation; meaning you cannot connect to more than a certain number of devices simultaneously. I don't know how many BT devices you can connect to at once. I know at least two simultaneous connections (I've only had two simultaneous connections at a time).
You said you have other BT devices in your house other than those three your having issues with. How many are there? How many are you connected to at any given moment?
Is it possible that you have too many simultaneous connections?
When you try to connect to your car.. Did you check under BT connection (your vehicle) to make sure both audio and calls are checked..
doubledragon5 said:
When you try to connect to your car.. Did you check under BT connection (your vehicle) to make sure both audio and calls are checked..
Click to expand...
Click to collapse
Yes, and I've disconnected, reconnected and even unpaired and re-paired the phone to the car.
gernerttl said:
I'm not entirely sold on the idea that it is a hardware fault. It could be a hardware limitation; meaning you cannot connect to more than a certain number of devices simultaneously. I don't know how many BT devices you can connect to at once. I know at least two simultaneous connections (I've only had two simultaneous connections at a time).
You said you have other BT devices in your house other than those three your having issues with. How many are there? How many are you connected to at any given moment?
Is it possible that you have too many simultaneous connections?
Click to expand...
Click to collapse
Unless having multiple connections causes the BT to fail completely, no. Even after turning the car off and walking away, it still will not connect to the S Pen. The only BT devices I use with that phone regularly are:
S Pen, Car (Music & Calls)
At work I develop devices that use Bluetooth and I sometimes connect to them, but only ever one at a time.