https://forum.xda-developers.com/xz-premium/help/how-xz-premium-vr-support-daydream-t3622696
I got help from the above article.
so I am using daydream as 4k / 2k.
1. Use adb to change the resolution to 4k / 2k.
2. Use the attached 4k / 2k qr code.
3. Enable the skip vr entry scene in Day Dream Developer option.
4. Turn off nfc.
5. Use Daydream.
Attached
Daydream qr code is the manufacturer value extracted from the Daydream View 2017 nfc information.
https://www.reddit.com/r/daydream/comments/7pb37p/qr_code_for_daydream_view_2017_version/
Original / 2k / 4k
With lens
Screen distance 40 / 40 * 1.5 = 60 / 40 * 2 = 80
Distance between lenses 64 / 64 * 1.5 = 96 / 64 * 2 = 128
Bottom-center distance 35 / 35 * 1.5 = 52.5 / 35 * 2 = 70
Distortion
k1 = 0.4331
k2 = -0.085
Four 'fov figures' are 55.
----------------------
How to activate daydream service
https://forum.xda-developers.com/lg-g5/how-to/7-0-enable-google-daydream-root-t3525848
Daydream by pass (release app limits)
https://forum.xda-developers.com/mo.../spoofing-daydream-compatible-device-t3534943
Beyond the sexual and monetary moralism surrounding virtual reality devices, I just want to know the truth.
I think. Xz Premium is the highest visual quality of all virtual reality devices for use with YouTube Vr Platform.
I might be telling a lie. I'm just curious.
4k ips That's great. Video quality.
(Pimax 4K is similar panel)
Low latency could be a problem.
But I had no problem viewing flat screen videos.
I liked the movie watching very much with Xzp.
One could say
the daydream view 2017 fov is narrow..
Netflix vr has a film, Pacific Rim.
Watch this movie. If you use big screen size with Daydream View 2017, you don't understand the movie action scenes. Symbol recognition fov of a human being is 60 degree.
I think..
Daydream View 2017 is great for movie watching..
There are already sufficient viewing fov to watch movies.
I think..
4k ips came close to the experience of looking at PC monitors.
I wonder if I was wrong..
I wonder if people just don't know..
--------------------
Further information...
Oreo rom is good working in 4k/2k vr.
not nougat..
In nougat..
The screen is stained.
Kernel problem?
Sadly, I have no ability.
-----------------
moonlight for daydream
https://www.reddit.com/r/daydream/comments/877mcp/moonlight_for_daydream_stream_your_pc/
It is an app to stream 'PC screen Itself' with high video quality wirelessly.
'Wireless'
I think...
Netflix vr has a video quality of 500 ~ 600p
With this app,
more than 1080p netflix video contents enjoying is possible.
This app works for only nougat..
Operating in nougat..not oreo.
Sometimes the screen gets stained.
if reboot, ok..
I want to use this app and 4k/2k vr at the same time.
If so, the app should work in Oreo or there should be no spot problem in Nougat.
Can someone solve this problem?
-----------------
[Problem is Solved]
How to use xzp for vr big screen(subtitle: Moonlight for daydream in Oreo)
https://forum.xda-developers.com/xz-premium/how-to/guide-how-to-xzp-vr-screensubtitle-t3816442
That's great Man! Thanks for sharing! But the Title... lol
I will share it on My Patch since i just enabled Hard/Software Support for Daydream / VR with the coming Update. Hope it delivers the wished Quality and that the 4K Display switch Option on AOSP soon works again on Oreo...
For now works just the ADB Command.
BR
Edit: Would be interesting how good this works on top of My Patch on AOSP since it has full Support for Daydream and VR (Including Configs, Permissions and Settings + Play Store App Compatibility). Will release it soon and hope somone can test it with a Daydream Headset...
Miustone said:
That's great Man! Thanks for sharing! But the Title... lol
I will share it on My Patch since i just enabled Hard/Software Support for Daydream / VR with the coming Update. Hope it delivers the wished Quality and that the 4K Display switch Option on AOSP soon works again on Oreo...
For now works just the ADB Command.
BR
Edit: Would be interesting how good this works on top of My Patch on AOSP since it has full Support for Daydream and VR (Including Configs, Permissions and Settings + Play Store App Compatibility). Will release it soon and hope somone can test it with a Daydream Headset...
Click to expand...
Click to collapse
That sounds very interesting - I will test this in the near future.
I don't get the thread title though , but I can say the XZp has a much clearer image than my Oculus Rift or my last phone (Galaxy S6). But it is only really good for using a vr setup that doesn't require to move your head. I use VRTV as my player, not the perfect app but pretty near to perfect, if Daydream will ever work on my XZP again, I'll test DeoVR , which is in my opinion the best player for PC/Oculus and hopefully for android as well
onkelfeix said:
That sounds very interesting - I will test this in the near future.
I don't get the thread title though , but I can say the XZp has a much clearer image than my Oculus Rift or my last phone (Galaxy S6). But it is only really good for using a vr setup that doesn't require to move your head. I use VRTV as my player, not the perfect app but pretty near to perfect, if Daydream will ever work on my XZP again, I'll test DeoVR , which is in my opinion the best player for PC/Oculus and hopefully for android as well
Click to expand...
Click to collapse
Awesome to hear from someone who can compare the Quality! I was never a fan of this Headmoving Stuff. SONY HMD was the true sh** when it comes to a great Head Mounted Display Experience and as a Gamer to i still prefer to move the View Field with My Mouse instead of using Sensor. I can just recommend this kind of using even with VR Headsets. Less shaky and a lot more Precisely!
Another Question, Is heat a Problem on Your actual Setup? I can ensure it will be much cooler at all with AOSP and the Patch. Just played a Dungeon Session Shadowgun Ledgens on Ultra Settings with 60FPS and i got almost no heat or Performance Issues. It's incredible how big the difference to Stock is...
I'm also one of the Founders from Riftcat (VRidge), and i can really recommend it btw. I also bought Moonlight but i was never able to use it as HMD (Without Headtracking). It would be Ultra Killer to have a Way to use the XZP as a 4K Head Mounted Display with this two Services. Would be really thankfull for any Ideas (Mainly using the PC for Video and Work, just sold My GTX 1060)!
And a last Thing i have to say after reading Your reply again. The XZP doesn't supports VR with Hardware or Software (But it could) on Stock right!? The funny Thing is, i really enabled full Support for it. You can choose between Flicker Reducing or Sharpness in the Display Settings, and it allows You to setup Daydream on the normal Way. Visit the Play Store, Download the Daydream App (VR main Services are included in the Patch) and set it up. It does also support advanced Daydream Options and it handles the VR Services over advanced profiles which are involving the Hardware and the Software Parts of Android (Full Support). So it should be a huge upgrade compared to Stock. And AOSP has also Options for the Display Resolution / Frequency (Which are not working yet), which could be the perfect addition to that (Switching between Options without ADB).
I would really appreciate to hear from You what You can reach with the Patch and AOSP! Sadly do i not own a Daydream Headset (Just a Chinese Cardboard which collects Dust), or any other Kind of VR Headset so i can't fully test everything. But i think i will go to buy a Daydream 2017 Headset when i have some Money again. Would really like to use My PC on My XZP Screen...
Can't wait to know more about all this! BR :highfive:
onkelfeix said:
That sounds very interesting - I will test this in the near future.
I don't get the thread title though , but I can say the XZp has a much clearer image than my Oculus Rift or my last phone (Galaxy S6). But it is only really good for using a vr setup that doesn't require to move your head. I use VRTV as my player, not the perfect app but pretty near to perfect, if Daydream will ever work on my XZP again, I'll test DeoVR , which is in my opinion the best player for PC/Oculus and hopefully for android as well
Click to expand...
Click to collapse
I've always used the vrtv, my best player ^^
It plays on the Sony 4K panel without adb command.
Daydream Skybox app
can also be used with 4K panel using adb command.
I haven't used deo vr,
but I'm looking forward to a great experience.^^
I do not know about PC vr device( Samsung Odyssey was put on for a while, and tracking was great.)
but I think it is okay to flat video watching head tracking. Move less than one expected.
I think smartphone head tracking capability is poor and there may be a problem there. Instead, Xzp video quality is supplementary.
I think
not suitable heavy game.
suitable video watching like youtube vr, casual game, 2d screen game..
I look forward to your response with experience as I can not use a large number of vr equipment.
thanks your reply^^
Miustone said:
That's great Man! Thanks for sharing! But the Title... lol
I will share it on My Patch since i just enabled Hard/Software Support for Daydream / VR with the coming Update. Hope it delivers the wished Quality and that the 4K Display switch Option on AOSP soon works again on Oreo...
For now works just the ADB Command.
BR
Edit: Would be interesting how good this works on top of My Patch on AOSP since it has full Support for Daydream and VR (Including Configs, Permissions and Settings + Play Store App Compatibility). Will release it soon and hope somone can test it with a Daydream Headset...
Click to expand...
Click to collapse
Thank you for your interest and effort. ^^
I donate you 100 dollars.
I wish you could use it to buy a daydream headset.
I'll give you feedback on your efforts.^^
I don't care what the consequences are.
I wish you a good time~
Miustone said:
Awesome to hear from someone who can compare the Quality! I was never a fan of this Headmoving Stuff. SONY HMD was the true sh** when it comes to a great Head Mounted Display Experience and as a Gamer to i still prefer to move the View Field with My Mouse instead of using Sensor. I can just recommend this kind of using even with VR Headsets. Less shaky and a lot more Precisely!
Another Question, Is heat a Problem on Your actual Setup? I can ensure it will be much cooler at all with AOSP and the Patch. Just played a Dungeon Session Shadowgun Ledgens on Ultra Settings with 60FPS and i got almost no heat or Performance Issues. It's incredible how big the difference to Stock is...
I'm also one of the Founders from Riftcat (VRidge), and i can really recommend it btw. I also bought Moonlight but i was never able to use it as HMD (Without Headtracking). It would be Ultra Killer to have a Way to use the XZP as a 4K Head Mounted Display with this two Services. Would be really thankfull for any Ideas (Mainly using the PC for Video and Work, just sold My GTX 1060)!
And a last Thing i have to say after reading Your reply again. The XZP doesn't supports VR with Hardware or Software (But it could) on Stock right!? The funny Thing is, i really enabled full Support for it. You can choose between Flicker Reducing or Sharpness in the Display Settings, and it allows You to setup Daydream on the normal Way. Visit the Play Store, Download the Daydream App (VR main Services are included in the Patch) and set it up. It does also support advanced Daydream Options and it handles the VR Services over advanced profiles which are involving the Hardware and the Software Parts of Android (Full Support). So it should be a huge upgrade compared to Stock. And AOSP has also Options for the Display Resolution / Frequency (Which are not working yet), which could be the perfect addition to that (Switching between Options without ADB).
I would really appreciate to hear from You what You can reach with the Patch and AOSP! Sadly do i not own a Daydream Headset (Just a Chinese Cardboard which collects Dust), or any other Kind of VR Headset so i can't fully test everything. But i think i will go to buy a Daydream 2017 Headset when i have some Money again. Would really like to use My PC on My XZP Screen...
Can't wait to know more about all this! BR :highfive:
Click to expand...
Click to collapse
Carbonrom + snappatch
It doesn't go over daydream vr entry screen.
I can't get to the next step on the controller setup screen.
stock rom v1848. It runs well.
I haven't checked more anything else.
Sony Oreo stock Rom are well run but the screen brightness turns dark during long time using 4K setting vr because of the heat problem.
------------
Daydream View 2017 headset is recommended. It is comfortable-fit, lightweight, and has good fov and very little misting. First of all, It has a 'heat sink'.
https://www.virtual-reality-shop.co.uk/
There is a best-seller baofeng mosing s1.
It is known as the current mobile best fov.
I bought it.
For xzp, size do not fit, so further work is required.
There is a misting. can't use glasses. I think fov is fine but that doesn't get ahead of Daydream view 2017 quality.
Fov is less interested when adjusted.
I eventually use a Daydream view 2017 headset.
Fov small, awkward sense of wearing,
but untouchable video quality is Antvr.
For image quality, sometimes I use antvr.
-----------------
That's all.
I can give you information now~
Post moved backwards.
Wow, seems that this thread is starting to skyrocket
I will take my time and read everything again, currently at work and a bit in a rush....
With my current setup ( g8141, turbo p75d rom , vrtv , bobovr z5 headset with daydream compatible controller, with sitesinvr calibration ) I have no heat issues (my galaxy s6 got so hot after just some minutes , that it would be more safe to wear aramid fibre gloves..... ) and the image is not distorted.
The manual "sharpness setting" the headset is offering seems to end right at the position the image is getting sharper for me, if the phones display is moved 1-2mm further away from the lenses, it might be even better, but not possible.
So maybe this is something that can be dealt with on the software side. (I remember the Oculus, DeoVR software offered a sharpness slider which did magic to some videos.... )
@Miustone: What I've read about your Snappatch is that you can alter the max bitrate limits etc which the snapdragon835 is able to play? Being able to play higher resolutions than regular 4K would be great as well.
Anyway I'm highly interested in testing this, even though this is completely new for me. Have never been using an aosp rom, has always been a little bit too debloated for me.
onkelfeix said:
Wow, seems that this thread is starting to skyrocket
I will take my time and read everything again, currently at work and a bit in a rush....
With my current setup ( g8141, turbo p75d rom , vrtv , bobovr z5 headset with daydream compatible controller, with sitesinvr calibration ) I have no heat issues (my galaxy s6 got so hot after just some minutes , that it would be more safe to wear aramid fibre gloves..... ) and the image is not distorted.
The manual "sharpness setting" the headset is offering seems to end right at the position the image is getting sharper for me, if the phones display is moved 1-2mm further away from the lenses, it might be even better, but not possible.
So maybe this is something that can be dealt with on the software side. (I remember the Oculus, DeoVR software offered a sharpness slider which did magic to some videos.... )
@Miustone: What I've read about your Snappatch is that you can alter the max bitrate limits etc which the snapdragon835 is able to play? Being able to play higher resolutions than regular 4K would be great as well.
Anyway I'm highly interested in testing this, even though this is completely new for me. Have never been using an aosp rom, has always been a little bit too debloated for me.
Click to expand...
Click to collapse
you are right.
From my experience..
In general use, there are no heat problems.
In general use Youtube vr operates at 1080p.
there are no heat problems.
but image is blurry.
In general use Youtube cardboard option, vrtv is 4k working. but youtube vr is not 4k working.
In adb, qr code setup use Youtube vr is 4k working.
Image is sharpness like youtube cardboard.
but heat problem..
In high temperature and sony stock oreo, the screen turns dark brightness automatically. but There is nothing wrong with the performance.
D daydream said:
Thank you for your interest and effort. ^^
I donate you 100 dollars.
I wish you could use it to buy a daydream headset.
I'll give you feedback on your efforts.^^
I don't care what the consequences are.
I wish you a good time~
Click to expand...
Click to collapse
Hey Mate!
Just want to thank You before accepting the Donation! I promise that i do buy the latest Daydream Headset in Order to make the Patch fully supporting it! You really openend up a big World for Me!
You will get a Special Place on My Patch Threads for allowing Me to get the Hardware for My Development! Really appreciate it, and i'll let You know here with some Pics how it goes from now!
Looking forward to that! Thanks again!
BR
EDIT: Just bought one on Ebay and it will hopefully come very soon!
Think i can say a lot more about all this VR Stuff after being able to use it by myself. That will surely help a lot to bring this forward. And great side effect, i still have My Axon 7, means i can test a official supported Daydream Device too. Should be great to compare!
Miustone said:
Hey Mate!
Just want to thank You before accepting the Donation! I promise that i do buy the latest Daydream Headset in Order to make the Patch fully supporting it! You really openend up a big World for Me!
You will get a Special Place on My Patch Threads for allowing Me to get the Hardware for My Development! Really appreciate it, and i'll let You know here with some Pics how it goes from now!
Looking forward to that! Thanks again!
BR
EDIT: Just bought one on Ebay and it will hopefully come very soon!
Think i can say a lot more about all this VR Stuff after being able to use it by myself. That will surely help a lot to bring this forward. And great side effect, i still have My Axon 7, means i can test a official supported Daydream Device too. Should be great to compare!
Click to expand...
Click to collapse
I saw the special place. I love it^^
Thank you very much for your courtesy to me.
I just want to share my vr experience about Xzp.
I'm looking forward to your work.
Anywhere in the world, I don't find detailed comparison between 2k oled and 4k ips smartphone vr experience.
All devices is not perfect.
there are good points and bad points
there is a good place to use.
I was curious.
Although good video performance,
xzp can not be mentioned in vr battleground.
there are any advantages to use xzp,
I would like to let it know for people.
Someone may use vr with xzp for the first time
because of this thread.
I'll leave a brief piece of information for xzp users.
It's no big deal. People who are interested and experienced may know.
However,
it is better to avoid the stress of first vr experience.
Everything from my experience.
It is subjective. This may not be the correct answer.
------------------------
1.
feel dizzy when use it for the first time.
adaptation Period 2 - 3 days.
------------------------
2.
Wear glasses for the low visibility person.
If vr has a focal adjustment function.
With focal adjustment, you can adjust the focus.
you can see well.
but tired eyes after longtime use.
because the image is so close to eyes.
with glasses,
the image is approximately 1m close to eyes.
1m is comfortable distance for eyes.
-------------------
3.
Each piece of vr headset has its own point of good focus sweet spot. In sweet spot, There's less of a color diffusion. You'll have your own way.
Tips for wearing most vr headset.
It is good to feel comfortable to adjust wearing straps so that it adheres to the forehead with small amount of load on cheekbone.
--------------------
4.
qr code calibration.
I recommand Sitesinvr.com.
There is a famous headset qr code.
It is also possible to create a personal qr code using the sitesinvr app in play store.
---------------------
5.
Xz premium is not dream ready phone.
there is nfc bug.
When using a daydream view 2017 headset or third-party headset, Nfc error message will continue to pop up.
solution.
Feel free to apply anything according to circumstances.
1)
In daydream developer option,
enable skip vr entry scene option
and turn off nfc.
2)
use airplane mode and turn off nfc.
3)
Between the front cover and the smartphone,
attach a piece of 'foil'. No error message occurs even if nfc turn on.
-------------------------
6.
There is a 'drift' issue with all smartphones, gyro sensor, compass.
Even all the vr equipment.
but, Smartphone in particular
To be honest, there is no perfect solution.
I am very sorry about this...
It could be the biggest enemy about Smartphone vr development.
edit.
but we can buy external sensor for daydream.
(now I got information..i'm searching.)
Is Daydream with external sensor called smartphone vr?
Anyway xzp is used.
edit. I don't find useful information.
this inormation is unclear.
<
Drift solution
1) Compass correction.
2) Gyro sensor calibration.
3) avoid Electromagnetic effects.
In vr use I dont't use anything but only daydream bluetooth controller.
( I don't know why. People report being affected.)
4) To find the controller location,
turn on location options.
It seems to affect controller drift or screen drift.
I'm not sure.
As for drift issues,
Google has advised to fully charge the controller.
I think there could be some kind of correction.
and someone recommand location - device only option.
>
There are no gyrosensor and compass compensation options on Xzp.
Use GPS status app.
This app has correction option.
and There is only compass correction option on the Google Map.
From experience,
it is likely to easily occur if you take off your headset countless times.
There are information about drift issues in the reddit.
Each will already have its own solution.
edit.
The 2018 April update for Pixel 2 just fixed the magnometer (drift).
It is said that someone installed it even though it is not Pixel 2.
I don't know that way.
<next post..continue..>
7.
Jiggy screen issue
<
Quoting..
Shelly tom' post in
https://www.reddit.com/r/daydream/comments/7asyyt/daydream_s8_jiggy_screen/
TL;DR - thick phone case or dirty center "nubs" in daydream view may cause that issue.
When it starts shaking and while still wearing it, try pushing on the daydream view flap and phone as if opening it. If the shaking stops the contacts are dirty.
Also, the little center nubs do three things.
they center your view.
they also resize the height from thick phone cases. This is why there are two of them.
they cause your display to jump around or "vibrate" when dirty.
Take the phone out and wipe down the nubs and the device where they meet. It should allow for a better contact and stop the shaking. If it looks clean there could be oil residue.
With curved glass phones, I've observed that thick phone cases may cause the bottom "nub" to not fully make contact on the lower part. Games with more motion from looking around causes the phone to shift slightly up thus causing poor contact on the lower "nub". The poor contact is the source of the shaking screen in this case.
>
Sometimes jiggy screen issue has come up.
so I decide to don't use cases and films on smartphones.
In my experience,
It was convenient not to use cases and films on smart phones. This is a subjective conclusion.
I use smart phone coating liquid instead.
It's a German-made nano tol pro product.
There are a lot of coating products.
----------------------
8. about color and screen door effect
Daydream view 2017 is Fresnel lense.
Fresnel lense doesn't express the difference between the brightest and darkest colors very well.
Have two effects.
1. bad image quality.
2. but reduced screen door effects.
sony stock color mode
1. standard mode is suitable nomral lense(ex antvr)
2. vivid mode is suitable fresnel lense(ex daydream)
vivid mode maximizes the contrast between the brightest and darkest colors. complements the fresnel-lense defect.
edit.
https://youtu.be/IrircflFHzw
( Looking for images related to color, I linked this video.
I'm sorry if it doesn't suit your taste.^^; )
You can see it by changing the color mode settings while watching this video.
You will also notice that the screen door effect is strong on the strong primary colors.
because
In strong primary colors, the brightness contrast between brightest and darknest sub-pixel is maximized...
However,
it should be noted that this is not a regular colored video.
--------
Additional
This is my solution
from daydream view 2017 and vivid mode
If you don't like the color,
increase the color red in white balance setup.
If the screen is yellow, increase the color blue in white balance setup.
edit.
20180425
The higher the resolution, the better it is for the screen door effect. Because at lower resolutions, pixels are clustered together. Screen door effect looks bigger. High resolution is advantageous for the screen door effect.
----------------------
9. heat issue
The foil method is neat, simple.
https://www.gamecrate.com/samsung-gear-vr-tips-tricks-fixes-overheating-devices/12916
Daydream view 2017 has 'heat sink'.
edit.
10.
you use 4k adb command/4k qr code..
don't enable Dashboard Option (in daydream develper option.)
It's not working. You don't move library option in Daydream Home.
disable dashboard option. It works.
<end>
D daydream said:
I saw the special place. I love it^^
Anywhere in the world, I don't find detailed comparison between 2k oled and 4k ips smartphone vr experience.
Click to expand...
Click to collapse
A real in depth comparison is hard to find. I can just tell from my personal experience with Galaxy S6, Oculus Rift and now XZP.
I'm curious what can be achieved by software / settings with that 4K display the XZP has, but I'm pretty sure that it'll stil be a "high persistance" display overall and is lacking external "correction". If I remember correctly the Daydream headset has no electronics built in, so the phone is completely on it's own and will most likely start to drift away.... thats one big disadvantage to the GearVR for example. Don't know what regular "Daydream Ready" phones do in that case but I think they might have better calibrated sensors, or just have the same drifting problems.
Miustone said:
That's great Man! Thanks for sharing! But the Title... lol
I will share it on My Patch since i just enabled Hard/Software Support for Daydream / VR with the coming Update. Hope it delivers the wished Quality and that the 4K Display switch Option on AOSP soon works again on Oreo...
For now works just the ADB Command.
BR
Edit: Would be interesting how good this works on top of My Patch on AOSP since it has full Support for Daydream and VR (Including Configs, Permissions and Settings + Play Store App Compatibility). Will release it soon and hope somone can test it with a Daydream Headset...
Click to expand...
Click to collapse
I'll test it for you. I have a Daydream headset.
<how to activate chrome canary vr web browsing>
It had worked in other daydream ready phone.
But it did not work on xzp
Maybe xzp is not a daydream ready phone.
but
I noticed that it was running recently in miustone' Xperistockrom-V1848.(I do not check Sony Oreo stock rom operation)
Unfortunately, adb 4k mode does not work.
So the screen is blurry. However, video playback on the web is sharpness like YouTube cardboard(4k working).
It is quite useful..
----------------
adb 4k mode works in chrome 66 version.(not canary)
but screen is black... It's unusable
-------------------
chrome canary vr web browsing.
('Chrome 66 version' activate method is similar.)
1. Install the app : chrome canary
2. searchbar input : chrome://flags
3. Enable everything with VR, XR, or Daydream in its name.
ex)
-VR browsing native android ui
-WebXR Gamepad Support
-VR browsing web input editing
- WebVR
- WebXR Device API
- WebXR orientation sensor device
- WebVR VSync-aligned timing
- WebXR presentation render path
- VR Browsing
- Chrome VR virtual keyboard
- VR browsing experimental features
- VR browsing experimental rendering features
- VR browsing in Custom Tabs
- VR intents
- WEBVR auto presentation from intents
- Chrome icon in Daydream Home
use web broswing in daydream home .
Related Video: https://youtu.be/Mmr9PJXQHks
Just to keep You informed after this great Gift to Me...
I got Daydream working on Stock with full and native VR Support. What a awesome Expierence!
Check out My Website in ~24 Hours. The next Patch is just for the XZ Premium running Stock (I tested .145).
I gost recently banned for breaking the posting Rules again. So please excuse when i'm not longer active here! Would be great to see You again on My Social Media Page (Coming Soon)!
All the Best
Miustone said:
Just to keep You informed after this great Gift to Me...
I got Daydream working on Stock with full and native VR Support. What a awesome Expierence!
Check out My Website in ~24 Hours. The next Patch is just for the XZ Premium running Stock (I tested .145).
I gost recently banned for breaking the posting Rules again. So please excuse when i'm not longer active here! Would be great to see You again on My Social Media Page (Coming Soon)!
All the Best
Click to expand...
Click to collapse
I have listened to the message on your homepage.
I totally agree with your decision on social media homepage.
I think it's a better decision.
Thank you for all your hard work.
I have a close friend who has an iPhone 6s.
He is not usually interested in smartphone and vr.
I gave my friend youtube 4k vr experience with xzp.
He was very interested in flat screen images quality.(especially music video.)
He showed interest in your work I told him.
He said your work would be valuable.
Surface reactions of people in online are unimportant. Everyone who has experienced with xzp, it already knows it.
He who understood, he understands.
He who has ears to hear, let him hear.
All the best
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screen shift app
I recently noticed this app
screen shift app.
Screen Shift: Customize your display. More details at http://aravindsagar.github.io/ScreenShift/
It was easy to change the resolution without adb command.
Yo fellas, its your"rooting enthusiast SenpaiYank (lmao rooting enthusiast, as if such a thing exists)
Well, as you know, our device has a quite outdated and not so beefy (at all) SoC, the snapdragon 625. While its CPU is not tremendously ridiculously bad, the GPU quite is. This is not a prolem to people who don't care about games but a very prominent one on the other side.
With the help of this trick, tweak, whatever you decide to call it, you'll practically be able to play any game out there that you're not able to or play that same game at a higher setting than you would. The trick consists basically on lowering the screen resolution through a script, trading some of the visual quality for a noticeable night day performance boost. It's a common trick that works on other devices too and I've yet to find a game that had problems with it.
I'm using "profile" scripts to achieve it so you can change it on the go. I feel that way is the most ergonomic and quick one. Just run each script with root permissions according to your need. I recommend FX file explorer. Wanna play a graphically intensive game? Switch to gaming profile. Wanna do something else besides gaming? Switch to the default one.
As I side note, the trick can be done on unrooted users too but you'll need a computer and you'll have to apply the gaming profile permanently (unless you're willing to repeat the procedure whenever you want to go back to default). I can talk about it if you guys get interested on it.
Enough blah blah, how do I do it ?1st - Grab both of them (default.sh and gaming.sh)
2nd - Install (in case you don't have it), open and type this on the Terminal Emulator app:
Code:
su
To attain root access (not sure if needed but, just in case)
Code:
wm density
To get your current screen density value at 1080p (override density field).
Lets imagine you got 432.
3rd - Choose and calculate a new resolution for your gaming profile
So now lets ge to the actual work. Our device native resolution is 1080p (1920x1080) and we want to lower that.
I lower it to 810p (not a standard lmao) which is 75% of 1080p (1440x810) as it gives me agood balance between visual quality and performance. You can go even lower to something like 50% if you're ambituous about performance. At 810p I can expect a minimum of 25% performance uplift (not FPS).
So, to get your gaming profile resolution DPI, you multiply the relative percentage of it by the default profile resolution DPI.
Code:
[COLOR="darkred"]432[/COLOR] * [COLOR="RoyalBlue"]0.75[/COLOR] = [COLOR="Blue"]324[/COLOR]
This value will be your gaming resolution DPI a.k.a. the resolution from your gaming mode script.
4th - Edit default.sh and gaming.sh, apply the new values and save the files somewhere.
default.sh script should contain the values of your default resolution, in this case, 1920x1080 and 432. Size for resolution and density for DPI.
gaming.sh script should contain the values of your gaming profile resolution, in this case, 1440x810 and 324.
VOILÁ
To make the process much much easier and quicker, I use FX file explorer and its shortcut feature so I can switch between both profiles from my home screen pretty easily. Whenever I'm not playing a demanding game Is stick to the default mode, whenever I'm playing a graphically intensive game, I switch to the gaming mode and enjoy the improvement.
Cool, cool. So, is there an actual improvement in performance or is this just one of these so called placebo tricks ?It's definately not placebo and probably the most effective way around of increasing gaming performance!
I've tried to record a test with and without the trick (and failed, it doesn't look as effective in the video but I'll leave it here anyway). Take it with not 2 but 3 grains of salt due to all the uncontrallable factors that involved the scene, the actual gain in practical use is much more noticeable. The benchmark takes place in the super duper hot (pun intended) looking and intensive game, Shadowgun Legends.
On the first video, the device is running the Extreme Kernel, without the tweak, along a CPU cap of 2.5Ghz and a GPU cap of 855Mhz (or something around that). I didn't increase it further to prevent the device from overheating (which it already practically was) and because at a higher GPU clock, I would get arctifacts (my device does not support the 922Mhz frequency).
http://sendvid.com/zi9l8q44
On the second video, the device is running a beta batch of the velocity kernel, with the tweak, along a CPU cap of 1.9Ghz and GPU cap of 672Mhz. I ran the device at a lower speed so you can see how useful the improvement can also be.
http://sendvid.com/fqum12jw
I ran the game at the high graphical setting (30 FPS max) on one of its most intesive scenarios and were at very high ambient temperatures (30C) so again, take the videos with a grain of salt. Used an external gamepad to play and used Scrcpy to record the screen (through wifi so, the quality and framerate from the recording is considerably worse than the actual one). You should also remember the 5-6 FPS strain of capturing the screen.
I also used game bench to monitor the framerate (top right corner) where the last 1 minute of each benchmark were with the screen capturing off. Once again, sorry for the bad quality of the recordings, I'll leave a screenshot of the game bench results.
Not willing to write a outro so, yeah, basically thats it
Here's another sample video, of the same game, this time at medium settings. Along the very noticeable smoother gameplay you can also notice how the GPU load goes down from 95-100 to 70-80 and it becomes less of the bottleneck on the scenario. With the gaming profile could I could actually remove the 30 fps cap and run the game at +30.
Before:
https://photos.app.goo.gl/hwPg9KCwc6yLyt919
After:
https://photos.app.goo.gl/zDm4wkTHuAjQ7PA5A
OK, now I feel like a newb but this is my first Pixel device and the Google camera seems simple enough but I can't find how to set my video framerate to 1080p 60fps. I have it on 1080p and the only options I can find are on the top bar with color temp and flash and all it gives me is Auto and 30fps. Auto seems to go anywhere between 120 and 30 fps, I can't figure out the logic behind how it chooses. I really just want to lock it to 60fps for 1080p. Can someone help me out?
Turn off video image stabilization?
[email protected], [email protected]/60/120fps, [email protected], [email protected] (gyro-EIS)
jamgam said:
Turn off video image stabilization?
[email protected], [email protected]/60/120fps, [email protected], [email protected] (gyro-EIS)
Click to expand...
Click to collapse
I turned off IS and am still not seeing it, I tried 720p too and nothing but auto and 30fps. Open Camera and Filmic both give me 60fps.
I'm thinking anything over 30 fps is "slow motion" only. Still looking around myself b/c I'd love the 240 fps for videoing my golf swing
jamgam said:
I'm thinking anything over 30 fps is "slow motion" only. Still looking around myself b/c I'd love the 240 fps for videoing my golf swing
Click to expand...
Click to collapse
The Pixel 2 camera has 240 in slow motion.
Sent from my [device_name] using XDA-Developers Legacy app
Woah. This is a near deal breaker here. I can't seem to find 60fps on my $850 phone.
Update I found the place where you set the framerate, but unlike the Pixel 2 (which shows 30 and 60), the Pixel 3 only shows Auto or 30. W. T. F. This "auto" icon is located in the lower left when in video mode.
For what it's worth, I've gotten near the proper framerate with 3rd party apps. Both Open Camera (free) and Filmic Pro (paid) hit 59.667 on 60fps mode. The proper framerate is 59.94 (60,000/1001). Filmic Pro can do an exact even 60fps too if you force the framerate. I may try to gen some answers from Google directly if I don't figure this out over the weekend.
BackCheck said:
For what it's worth, I've gotten near the proper framerate with 3rd party apps. Both Open Camera (free) and Filmic Pro (paid) hit 59.667 on 60fps mode. The proper framerate is 59.94 (60,000/1001). Filmic Pro can do an exact even 60fps too if you force the framerate. I may try to gen some answers from Google directly if I don't figure this out over the weekend.
Click to expand...
Click to collapse
I tried open Camera, and it looks like 30fps when I force 60fps. It just says about 30.095, Min 22.222 and max 43.103 in Media Info. This is fail.
Can't find it myself! help
Was wondering the same thing. Selecting info on a recorded video doesn't show framerate either.
https://www.xda-developers.com/google-pixel-3-google-pixel-3-xl-minor-features/
Automatic FPS Switching
First, a new option to automatically switch FPS during video recording has been added. According to a Product Manager that we spoke to at the event, people have trouble deciding what the best framerate is before recording a video. This new feature lets the Google Camera app decide what framerate to record at – either 30 or 60 fps – depending on what’s on screen. The feature can even switch framerates in the middle of a recording. It doesn’t work with 4K videos, though.
Google Pixel 3 Auto Framerate
Click to expand...
Click to collapse
bartolo5 said:
Can't find it myself! help
Click to expand...
Click to collapse
djy said:
Was wondering the same thing. Selecting info on a recorded video doesn't show framerate either.
Click to expand...
Click to collapse
Hold the phone horizontal and select video mode. On the lower left corner you will see a little icon "A". Touch this icon and you will see "Auto" or "30fps".
---------- Post added at 10:27 PM ---------- Previous post was at 10:21 PM ----------
Archon810 said:
https://www.xda-developers.com/google-pixel-3-google-pixel-3-xl-minor-features/
Click to expand...
Click to collapse
Great, so 30fps is working as intended on an $850 phone. Thanks for finding this gem. Glad I don't have to wait 6 months to a year for this quote from Google to find out it essentially will never be fixed. Hopefully they don't regress on the Pixel 2, because this isn't a improvement in my book. How about Auto, 24, 30, 50, 60 option on an $850 phone?
This is not acceptable.
I want to be able to lock it to 60fps, not to leave Google device the frame rate for me.
Guys, we need to send feedbacks via the Camera app and try to involve the media (@madebygoogle on Twitter).
That's the only thing we can do to hope they'll release an update enabling 60fps selection.
matteventu said:
This is not acceptable.
I want to be able to lock it to 60fps, not to leave Google device the frame rate for me.
Guys, we need to send feedbacks via the Camera app and try to involve the media (@madebygoogle on Twitter).
That's the only thing we can do to hope they'll release an update enabling 60fps selection.
Click to expand...
Click to collapse
I just confirmed on their support chat that there is no option for 60fps, like we didn't already figure that out. They suggested going to 'settings -> about phone -> send feedback about this device' and sending feedback that way. I am already posting what I can on social media as well. Wish we could get this in the front page of xda.
I just used Open Cam set to 60fps and the Google Cam on auto to record the same scene and I must admit that they look identical. I cannot see the difference with my naked eye.
yankeesfan714 said:
I just used Open Cam set to 60fps and the Google Cam on auto to record the same scene and I must admit that they look identical. I cannot see the difference with my naked eye.
Click to expand...
Click to collapse
This is exactly my observation. Which means, this could be a limit of the new hardware and/or part of the Visual Core stuff which might be a harder thing to fix. We shall see how Google responds.
I think it will be "working as intended" or the hardware is limited to auto, because (insert some sort of white wash excuse). I would prefer darker video of 60 fps over brighter 30fps variable frame rate hogwash.
So today at my son's baseball game I used open Cam locked in at 60fps and goggle at 1080 auto and the open Cam video looks choppy and looks like it skipped frames. The Google Cam video looks very smooth like 60fps does. So I'm gonna say that Google Cam does a dang good job of chosing the best fps.
Video recording is an afterthought on the Pixel series. Stabilization is top tier, but everything else (image quality, audio quality, etc) takes a back seat. I'm actually not upset since I rarely ever record videos, and when I do, they are short clips at home that have ZERO production value. I'd be willing to be 95% of consumers are the same way.
Heck, have you noticed how every amateur video that goes viral on the news is shot in portrait mode and not landscape?! #PetPeve