LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer:
Code:
* Your warranty is void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Unofficially ported by me for Karbonn K9 Kavach 4G from moto c.
I don't have a pc that's why I cannot generate a beautiful updater-script for fast installation of the rom. Therefore I used twrp backup and twrp restoration method to make the updater script.
What's working:
- Almost everything
What's not working:
-Volte(Like all other mtk roms , you can use jio4Gvoice app)
Update :In Previous build I used busybox rm -rf command to format system which sometimes not working and the rom installed without erasing the present rom and gives bootloop. In this build this problem is fixed.
Download links>>
Rom(Updated link ): Download
***Make a backup of nvram , Boot , nvdata , system ,data before proceeding***
Instructions: ( 2 methods , use any one )
Method 1 (slow):
1. Wipe data and system from twrp( important otherwise modems will not work )
2. Install the zip.
3. Restore nvram and nvdata
4. Done....
Method 2 (fast)(recommended):
1. Download and extract the zip
2. You will find system.ext4.win and boot.emmc.win
3. Copy them into twrp backup folder(if you know where it is)
4. Wipe data from twrp( important otherwise modems will not work )
5. Restore system and boot and nvram and nvdata
3.done....
Flash twrp recovery if you haven't then visit https://youtu.be/rNgItjvz6FM
Rom is prerooted with magisk.
Minimal Gapps included.
Contributors:
Lineage os
@Bit2boss
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP recovery
Based On: LineageOS
hit thanks if you like this rom..
Also u can donate to help me.Donate
Status: Stable
Release Date: 2020-07-14
2nd release date : 2020-07-24
Working video : https://youtu.be/T9VdSLnNJPA
If anyone want to use this method to create Rom Updater script using twrp backup then feel free to use it . just give me proper credits.
Related
CyanogenMod 11.0 for the Memopad FHD10 4G - ME302KL
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
What Works:
Touch
Display
Brightness (auto and manual)
4G Network
WIFI
GPS
Bluetooth
Accelerometer
USB Charging
USB OTG
USB Pendrive
Deep Sleep
Front Camera (With othen camera apps, like "Open Camera" form play store.
and other things...
Bugs
Back Camera does not work...
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
You have to unlock tablet with asus app.
You have to use SevenMaxs TWRP RECOVERY for Me302kl
1. Download the ROM and the BOOT.IMG from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4. Reboot to recovery mode
Note: You Must use TWRP recovery
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
7. Install CM zip and GApps zip
8. Install Boot.img zip
9. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download: http://d-h.st/fakX This is only the ROM (system) without Boot.img - DONT'FLASH WITHOUT BOOT.IMG
Download Link for Boot.img http://www103.zippyshare.com/v/xRRsoYKi/file.html UPDATED 28-07-2016
Download TWRP Recovery by SevenMaxs : http://d-h.st/M3ep
To install recovery exstract frm the zip the file recovery.img and put it on the sdcard.
Then connect to the tablet with adb:
Code:
adb shell
su
dd if =/sdcard/recovery.img of =/dev/block/mmcblk0p25
Reboot into recovery VOL+ AND POWER
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the KERNEL Source available on https://github.com/yatto/ME-302-KL
The rom is the Nexus 7 Official CM11 without some libs : system/lib/keystore.msm8960.so and power.msm8960.so and with the /system/vendlor/lib/files from Me302kl 4.2.2 ROM
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team
SevenMaxs for his recovery TWRP
If i missed someone contact me!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDAevDB Information
CyanogenMod 11 for Me302kl, ROM for the Asus Memopad FDH10 4G
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod for Nexus7 2013
Version Information
Status: Beta1, Stable
yattodettaman said:
CyanogenMod 11.0 for the Memopad FHD10 4G - ME302KL
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
What Works:
Touch
Display
Brightness (auto and manual)
4G Network
WIFI
GPS
Bluetooth
Accelerometer
USB Charging
USB OTG
and other things...
Bugs
Camera
others ?...
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
You have to unlock tablet with asus app.
You have to use SevenMaxs TWRP RECOVERY for Me302kl
1. Download the ROM and the BOOT.IMG from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4. Reboot to recovery mode
Note: You Must use TWRP recovery
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
7. Install CM zip and GApps zip
8. Install Boot.img zip
9. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download: http://d-h.st/fakX This is only the ROM (system) without Boot.img - DONT'FLASH WITHOUT BOOT.IMG
Download Link for Boot.img http://d-h.st/PUF4 UPDATED 19-07-2016
Download TWRP Recovery by SevenMaxs : http://d-h.st/M3ep
To install recovery exstract frm the zip the file recovery.img and put it on the sdcard.
Then connect to the tablet with adb:
Code:
adb shell
su
dd if =/sdcard/recovery.img of =/dev/block/mmcblk0p25
Reboot into recovery VOL+ AND POWER
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the KERNEL Source available on https://github.com/yatto/ME-302-KL
The rom is the Nexus 7 Official CM11 without some libs : system/lib/keystore.msm8960.so and power.msm8960.so and with the /system/vendlor/lib/files from Me302kl 4.2.2 ROM
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team
SevenMaxs for his recovery TWRP
If i missed someone contact me!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDAevDB Information
CyanogenMod 11 for Me302kl, ROM for the Asus Memopad FDH10 4G
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod for Nexus7 2013
Version Information
Status: Testing,
Click to expand...
Click to collapse
UP
yattodettaman said:
UP
Click to expand...
Click to collapse
Going to try it out thank you!!!
yattodettaman said:
UP
Click to expand...
Click to collapse
This is great , do not stop ! We need a stable 4.4
New Boot.img !
Fixed Deep Sleep bug, Front Camera and a lot of little fixes...
Link to download new boot.img : http://www103.zippyshare.com/v/xRRsoYKi/file.html you have to flash with TWRP recovery.
I installed Open Gapps 4.4.4, and the rom is very usable.
Have a nice day !
Hi!
I flashed rom. The end of the setup wizard fc aosp keyboard. Very hard situation, I did not create google account. I copied from phone Swiftkey app, then was good.
SD card not mounted, can not be used. There is a solution?
Thank you for your work!
(I'm sorry my English is very bad)
Very Strange. ..
I have no Fc. Internal sdcard Works.
You are right. External sdcard does not work.
Use the Last Boot.img.
I flashed open GApps 444 stock too.
Tab works Very fine.
Lilliput works Very fine too. ?
Another problem: baseband unknow. I flashed new boot img
mmarta said:
Another problem: baseband unknow. I flashed new boot img
Click to expand...
Click to collapse
It isn't a nexus7. Baseband is unknown because it is a Duma. What is the issue that baseband Can make?
My tablet ME302KL, not Nexus7.Wifi connect to router, but not mobilnet. Dirty flash: rom, open gapps, new boot img = baseband unknow.
Mobile network works fine. 3g and 4G.
Solved Baseband unknow, but 3G and 4G work fine over wifi.
ME302KL LOLLIPOP http://forum.xda-developers.com/android/general/rom-5-1-1-cm-12-1-unofficial-memopad-10-t3431772
4.4
yattodettaman said:
ME302KL LOLLIPOP http://forum.xda-developers.com/android/general/rom-5-1-1-cm-12-1-unofficial-memopad-10-t3431772
Click to expand...
Click to collapse
Please, give link on android 4.4.ONLY me302kl
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Supported Devices
Karbonn Titanium S1 Plus (Quad-Core MSM8212, 1GB RAM)
Phicomm C230W
Boot Images
boot-kts1p.img => Karbonn Titanium S1 Plus
boot-c230w.img => Phicomm C230W
Userdata Images
userdata.img => Karbonn Titanium S1 Plus
userdata-c230w.img => Phicomm C230W
Flashing Instructions
Use fastboot to flash images. Start your device in fastboot mode by pressing and holding Volume-UP + Power buttons until manufacturer logo appears. Then connect your device to PC using USB cable.
Make sure your device is detected and running fastboot mode by issuing "sudo fastboot devices" command. After success use following commands to flash ROM.
1. sudo fastboot flash boot boot-kts1p.img (for Karbonn Titanium S1 Plus) OR sudo fastboot flash boot boot-c230w.img (for Phicomm C230W)
2. sudo fastboot flash userdata userdata.img
3. sudo fastboot flash system system.img
4. sudo fastboot flash recovery recovery.img
Now, reboot to recovery to clear dalvik cache using following command
5. sudo fastboot boot recovery,img
Select data/factory reset and reboot the device.
GApps
https://www.androidfilehost.com/?fid=24052804347822010
Use recovery to install gapps and do not forget to clear dalvik cache.
XDA:DevDB Information
Phicomm C230Wxx, ROM for all devices (see above for details)
Contributors
SDhi
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock 4.4.2 Modem Firmware
Based On: CyanogenMod 11.0
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2016-12-11
Created 2016-12-11
Last Updated 2017-01-04
Reserved
So I decided to try this and everything flashed successfully, but when I try to install the GApps you are giving us (or OpenGapps) it fails and says that footer is wrong and verification failed. The ROM almost works on my C230W. The systemui process crashes constantly, but only when I have both sim cards in the phone, so it is not usable. I didn't tested it a lot tho.
mik13ST said:
So I decided to try this and everything flashed successfully, but when I try to install the GApps you are giving us (or OpenGapps) it fails and says that footer is wrong and verification failed. The ROM almost works on my C230W. The systemui process crashes constantly, but only when I have both sim cards in the phone, so it is not usable. I didn't tested it a lot tho.
Click to expand...
Click to collapse
Thanks mik13ST,
I have few queries
1. Would you like to be tester particularly for C230W device because I own Karbonn Titanium S1 Plus device (C230WJA) and CM-11 ROM is developed on C230WJA model.
2. Please provide "logcat" and "dmesg" of the crash.
3. Full specifications of your device e.g. RAM, CPU etc.
4. Stock ROM version.
5. Please share full Stock ROM and also share kernel's config.gz and dmesg from running Stock ROM through Google drive and PM the link.
6. Which recovery you used to flash GApps ?
Regards,
Sameer Dhiman
SDhi said:
Thanks mik13ST,
I have few queries
1. Would you like to be tester particularly for C230W device because I own Karbonn Titanium S1 Plus device (C230WJA) and CM-11 ROM is developed on C230WJA model.
2. Please provide "logcat" and "dmesg" of the crash.
3. Full specifications of your device e.g. RAM, CPU etc.
4. Stock ROM version.
5. Please share full Stock ROM and also share kernel's config.gz and dmesg from running Stock ROM through Google drive and PM the link.
6. Which recovery you used to flash GApps ?
Regards,
Sameer Dhiman
Click to expand...
Click to collapse
You are welcome,
1. no, I was just trying this rom if it is usable on my device (no, it's not)
2. logcat is here: logcat.zip
dmesg is not obtainable, adb disconnects shortly after boot
3. specs are the same as here: specs
4. & 5. stock rom should be the same as here: rom
6. I used the recovery you are giving us
I don't want to demotivate you, but I don't see any point in you developing this ROM, because the original one is usable and the android version is (roughly) the same. Cyanogenmod customization might be the only reason, but Resurrection Remix (a mix of CM and other ROMs) is better, or one can use Xposed Framework to get similar ways of customization on AOSP Android as well. This ROM is IMO quite far from perfect (other issues: white screen blink after turning display on, browser crashing and a few more).
Good luck in your effort,
mik13ST
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation
Before doing anything let me tell you your main rom should be LineageOs 13
1) first download recovery , kernel and multi rom patch
2) flash recovery zip file using your recovery ( name : - multirom-20160929-3.0.28-UNOFFICIAL-arubaslim.zip don't do any mistake )
3) after flashing recovery flash kernel (name :- kernel-20170218-3.4.0-UNOFFICIAL-arubaslim.zip)
4) then reboot recovery
5) after rebooting you should see new recovery then flash multi rom patch zip from recovery (name :- multirom-20160929-v33-UNOFFICIAL-arubaslim.zip) click inject bootimage and reboot recovery again
6) click add roms then add zip file and flash !
7) after flashing reboot system and enjoy
You can manage your roms using this app https://www.androidfilehost.com/?fid=673368273298932194
*FAQ'S*
Q1) What's Multi rom manager ?
A) it's used to boot 2 or more roms in your device for example windows 7 + windows 10 in your pc
Q2) flashing new rom will erase my data ?
A ) we use your internal or external sdcard as new partition for booting roms so no your data will not erased
XDA:DevDB Information
[MOD][Arm]MultiROM for Galaxy Core [v3.0.28][Beta 1], Multi Rom manager for the Samsung Galaxy Core
Contributors
androidlover5842
Source Code: https://github.com/I8552-CM/multirom_device_arubaslim
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2017-02-17
Created 2017-02-17
Last Updated 2017-02-17
Hi bro excellent work! Its compatible with i8260 to? And on the first line where it says "Before doing anything let me tell you your main rom should be los13" you refer to CM13? Or which rom?
EDIT: I already understood that you were referring to LineageOs. You could write it as LOs or the full name to avoid confusion, just a tip. Thanks!
Works perfectly, thanks!
Bro,whats the bugs?
techusthad said:
Bro,whats the bugs?
Click to expand...
Click to collapse
Does not have any bugs bro
My doubt is we have only internal storage of 4GB.So will be apps same in two roms?
Is there any way to remove this recovery with boot injector?
can you please make it one for galaxy core 2 please
I have an error in the apk ...it shows me "MultiROM recovery is not installed.Failed to download info about updates!" ,despite the fact that i've done everything and i can boot normally recovery and primary rom (linage 13) through the boot menu of the mod. Also i can't boot the secondary rom i installed (cm 11 4.4) it is stuck before loading the rom but i don't know if it has something to do with it.Should i do everything all over again?
Bro you said you ganna make a latest dualboot patcher for galaxy core 2.... Why didn't you responding on telegram
????? awesome for me
Tnx
A.L
Is this compatible with samsung galaxy core prime (sm-g360h)
Hey Friends if you were waiting for the Nougat Custom ROM for InFocus M680, now waiting is over I have ported a Nougat ROM for InFocus M680.
madOS based on AOSP
Code:
#include
/*
* Your warranty is now void.
* BACKUP Your Rom FIRST.
*
* I am not responsible for any kind of DAMAGE happen to YOUR Device/bricked devices, dead SD cards, etc.
* Please use it at YOUR own risk.
*/
Working...
RIL
Camera
Flash
Vibration
Other Not Tested
Known Issues...
VOLTE
Camcorder
Other Not Tested
Video:
Flashing
Download the Given files
Go to TWRP Recovery
Go to Backup Menu
And make full Nandroid Backup
Now Go to Wipe Menu and wipe Data, Cache, Dalvik Cache & System and Slide
And Go to Mount Menu & untick System
Go to Install Menu and Flash the Rom & patch zips or flash gapps if you like
After complete Flashing Press Reboot System
Downloads:
ROM
Patch
XDA:DevDB Information
madOS for InFocus M680, ROM for all devices (see above for details)
Contributors
Mohd.faraz.abc, fire855, superdragonpt, DerTeufel1980
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Base Marshmallow Firmware
Based On: madOS based on AOSP
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2017-07-12
Created 2017-07-20
Last Updated 2017-07-20
Wanted NVRAM and NvData TWRP Backup for Infocus M680.
Accidentally i format all my data in my phone using sptools. then freshly installed the ROM and everything, My imei and nvram error is still visible in my wifi. I manage to write the Imei Numbers But i cant get rid of the nvram error. so Please help me with nvram error. Please send me the back up for nvram and nvdata TWRP backup. Please Please.............................. Thank you in advance......
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Hi everyone i want to share a gsi vendor image that boots most Q and P roms for the samsung galaxy j4 core.
How to install:
reboot to twrp go to format data type yes *this will format all your data*
go back to wipe and select system,vendor,cache,data and dalvik then swipe to wipe
go to install click on install image select the gsi image file then swipe to flash
now select install zip and click on the vendor image you have downloaded and swipe to flash
finally you can flash gapps if your gsi doesn't include them *note: if you dont have enough space to install gapps to to wipe select system and select repair or change file system click on resize system then swipe to reisze*
and if you are into rooting flash magisk zip file
note try to not install gsi roms that aren't over 1.2gb lineageos 17.1 and dotos are prefered
BUGS:
none
What works:
-boots
-offline charging
-sound
-wifi
-gps
-bluetooth
-mtp
-RIL
if you want to report a bug be sure to include logcat
After this thread started to gain downloads, i decided pushed another update with improved peformance!
Download:
V2 Google drive: https://drive.google.com/file/d/1z-OrGTjv9HD9SL2j30EYyUA__xjmhIaR/view?usp=sharing
V1 Google drive: https://drive.google.com/file/d/14-XNmD_19Mt-dFSReBZk8luoeY2ZoD9r/view?usp=sharing
Credits:
@leohiper10 for the sources and allowing me to use his vendor image from his lineageos 16 build (doesnt use his vendor build anymore with V2).
myself for taking my time to test and fix the bugs
XDA: DevDB Information
Fggevhy Vendor for galaxy j4 core
ROM OS Version: 10 Q
ROM Kernel: Linux 3.x
ROM Firmware Required: latest bootloader and dtbo
Based On: Project Treble
Version Information
Status: Stable
Current Stable Version: V2.0
Current Beta Version: V2.0
Stable Release Date: 2021-11-08
Created 2021-09-20
Last Updated 2021-11-08
happy flashing!
Forgot to mention that the gsi image must be arm Aonly i will add that later
Changelog: 08/11/2021
-.img format instead of flashable zip
-Set screen density to 411
-Fixed pretty much all bugs in the older release
-Fixed Unknown baseband bug and unkown imei with old version on j410f
-Better peformance!
Changelog: 22/10/2021
-baked custom kernel onto it
-fixed call audio
-fixed crashing issue of qcrilmsg (responsable for ril)
-fixed wifi issue on j410F
-fixed dual sim on J410F/DS
How u fixed call audio ?
I tried flashing lineage and aosp. With both after going through the process, when I reboot system in twrp, it always reboots to download mode.
Device model: sm-j410f
NsovoXD said:
I tried flashing lineage and aosp. With both after going through the process, when I reboot system in twrp, it always reboots to download mode.
Device model: sm-j410f
Click to expand...
Click to collapse
try with orangefox
also if you have issues flash the first release of the vendor then update to v2
Has anyone tried this /vendor with a Lineage 18.1 GSI? Asking for a friend.
LegoLivesMatter said:
Has anyone tried this /vendor with a Lineage 18.1 GSI? Asking for a friend.
Click to expand...
Click to collapse
should work!