Database Info

[ROM][UNOFFICIAL][W.I.P][TESTING] CM11 Memopad FHD10 4G - ME302KL

CyanogenMod 11.0 for the Memopad FHD10 4G - ME302KL ​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
What Works:
Touch
Display
Brightness (auto and manual)
4G Network
WIFI
GPS
Bluetooth
Accelerometer
USB Charging
USB OTG
USB Pendrive
Deep Sleep
Front Camera (With othen camera apps, like "Open Camera" form play store.
and other things...
Bugs
Back Camera does not work...
-----------------------------------------------------------------------------------------------------------------------------------------------------------​
Installation
You have to unlock tablet with asus app.
You have to use SevenMaxs TWRP RECOVERY for Me302kl
1. Download the ROM and the BOOT.IMG from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4. Reboot to recovery mode
Note: You Must use TWRP recovery
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
7. Install CM zip and GApps zip
8. Install Boot.img zip
9. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download: http://d-h.st/fakX This is only the ROM (system) without Boot.img - DONT'FLASH WITHOUT BOOT.IMG
Download Link for Boot.img http://www103.zippyshare.com/v/xRRsoYKi/file.html UPDATED 28-07-2016
Download TWRP Recovery by SevenMaxs : http://d-h.st/M3ep
To install recovery exstract frm the zip the file recovery.img and put it on the sdcard.
Then connect to the tablet with adb:
Code:
adb shell
su
dd if =/sdcard/recovery.img of =/dev/block/mmcblk0p25
Reboot into recovery VOL+ AND POWER
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the KERNEL Source available on https://github.com/yatto/ME-302-KL
The rom is the Nexus 7 Official CM11 without some libs : system/lib/keystore.msm8960.so and power.msm8960.so and with the /system/vendlor/lib/files from Me302kl 4.2.2 ROM
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team
SevenMaxs for his recovery TWRP
If i missed someone contact me!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDAevDB Information
CyanogenMod 11 for Me302kl, ROM for the Asus Memopad FDH10 4G
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod for Nexus7 2013
Version Information
Status: Beta1, Stable

yattodettaman said:
CyanogenMod 11.0 for the Memopad FHD10 4G - ME302KL ​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
What Works:
Touch
Display
Brightness (auto and manual)
4G Network
WIFI
GPS
Bluetooth
Accelerometer
USB Charging
USB OTG
and other things...
Bugs
Camera
others ?...
-----------------------------------------------------------------------------------------------------------------------------------------------------------​
Installation
You have to unlock tablet with asus app.
You have to use SevenMaxs TWRP RECOVERY for Me302kl
1. Download the ROM and the BOOT.IMG from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4. Reboot to recovery mode
Note: You Must use TWRP recovery
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
7. Install CM zip and GApps zip
8. Install Boot.img zip
9. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download: http://d-h.st/fakX This is only the ROM (system) without Boot.img - DONT'FLASH WITHOUT BOOT.IMG
Download Link for Boot.img http://d-h.st/PUF4 UPDATED 19-07-2016
Download TWRP Recovery by SevenMaxs : http://d-h.st/M3ep
To install recovery exstract frm the zip the file recovery.img and put it on the sdcard.
Then connect to the tablet with adb:
Code:
adb shell
su
dd if =/sdcard/recovery.img of =/dev/block/mmcblk0p25
Reboot into recovery VOL+ AND POWER
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the KERNEL Source available on https://github.com/yatto/ME-302-KL
The rom is the Nexus 7 Official CM11 without some libs : system/lib/keystore.msm8960.so and power.msm8960.so and with the /system/vendlor/lib/files from Me302kl 4.2.2 ROM
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team
SevenMaxs for his recovery TWRP
If i missed someone contact me!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDAevDB Information
CyanogenMod 11 for Me302kl, ROM for the Asus Memopad FDH10 4G
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod for Nexus7 2013
Version Information
Status: Testing,
Click to expand...
Click to collapse
UP

yattodettaman said:
UP
Click to expand...
Click to collapse
Going to try it out thank you!!!

yattodettaman said:
UP
Click to expand...
Click to collapse
This is great , do not stop ! We need a stable 4.4

New Boot.img !
Fixed Deep Sleep bug, Front Camera and a lot of little fixes...
Link to download new boot.img : http://www103.zippyshare.com/v/xRRsoYKi/file.html you have to flash with TWRP recovery.
I installed Open Gapps 4.4.4, and the rom is very usable.
Have a nice day !

Hi!
I flashed rom. The end of the setup wizard fc aosp keyboard. Very hard situation, I did not create google account. I copied from phone Swiftkey app, then was good.
SD card not mounted, can not be used. There is a solution?
Thank you for your work!
(I'm sorry my English is very bad)

Very Strange. ..
I have no Fc. Internal sdcard Works.
You are right. External sdcard does not work.
Use the Last Boot.img.
I flashed open GApps 444 stock too.
Tab works Very fine.
Lilliput works Very fine too. ?

Another problem: baseband unknow. I flashed new boot img

mmarta said:
Another problem: baseband unknow. I flashed new boot img
Click to expand...
Click to collapse
It isn't a nexus7. Baseband is unknown because it is a Duma. What is the issue that baseband Can make?

My tablet ME302KL, not Nexus7.Wifi connect to router, but not mobilnet. Dirty flash: rom, open gapps, new boot img = baseband unknow.

Mobile network works fine. 3g and 4G.

Solved Baseband unknow, but 3G and 4G work fine over wifi.

ME302KL LOLLIPOP http://forum.xda-developers.com/android/general/rom-5-1-1-cm-12-1-unofficial-memopad-10-t3431772

4.4
yattodettaman said:
ME302KL LOLLIPOP http://forum.xda-developers.com/android/general/rom-5-1-1-cm-12-1-unofficial-memopad-10-t3431772
Click to expand...
Click to collapse
Please, give link on android 4.4.ONLY me302kl

[MOD][Arm]MultiROM for Galaxy Core [v3.0.28][Beta 1]

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation​
Before doing anything let me tell you your main rom should be LineageOs 13
1) first download recovery , kernel and multi rom patch
2) flash recovery zip file using your recovery ( name : - multirom-20160929-3.0.28-UNOFFICIAL-arubaslim.zip don't do any mistake )
3) after flashing recovery flash kernel (name :- kernel-20170218-3.4.0-UNOFFICIAL-arubaslim.zip)
4) then reboot recovery
5) after rebooting you should see new recovery then flash multi rom patch zip from recovery (name :- multirom-20160929-v33-UNOFFICIAL-arubaslim.zip) click inject bootimage and reboot recovery again
6) click add roms then add zip file and flash !
7) after flashing reboot system and enjoy
You can manage your roms using this app https://www.androidfilehost.com/?fid=673368273298932194
*FAQ'S*
​
Q1) What's Multi rom manager ?
A) it's used to boot 2 or more roms in your device for example windows 7 + windows 10 in your pc
Q2) flashing new rom will erase my data ?
A ) we use your internal or external sdcard as new partition for booting roms so no your data will not erased
XDA:DevDB Information
[MOD][Arm]MultiROM for Galaxy Core [v3.0.28][Beta 1], Multi Rom manager for the Samsung Galaxy Core
Contributors
androidlover5842
Source Code: https://github.com/I8552-CM/multirom_device_arubaslim
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2017-02-17
Created 2017-02-17
Last Updated 2017-02-17

Hi bro excellent work! Its compatible with i8260 to? And on the first line where it says "Before doing anything let me tell you your main rom should be los13" you refer to CM13? Or which rom?
EDIT: I already understood that you were referring to LineageOs. You could write it as LOs or the full name to avoid confusion, just a tip. Thanks!

Works perfectly, thanks!

Bro,whats the bugs?

techusthad said:
Bro,whats the bugs?
Click to expand...
Click to collapse
Does not have any bugs bro

My doubt is we have only internal storage of 4GB.So will be apps same in two roms?

Is there any way to remove this recovery with boot injector?

can you please make it one for galaxy core 2 please

I have an error in the apk ...it shows me "MultiROM recovery is not installed.Failed to download info about updates!" ,despite the fact that i've done everything and i can boot normally recovery and primary rom (linage 13) through the boot menu of the mod. Also i can't boot the secondary rom i installed (cm 11 4.4) it is stuck before loading the rom but i don't know if it has something to do with it.Should i do everything all over again?

Bro you said you ganna make a latest dualboot patcher for galaxy core 2.... Why didn't you responding on telegram

????? awesome for me
Tnx
A.L

Is this compatible with samsung galaxy core prime (sm-g360h)

[ROM][7.1.2] AOSPA Paranoid v7.3.1 for Honor 6x

Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
This ROM is provided by CodeOfHonor​
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.
Source Code:
Device Tree:
https://github.com/codeofhonor-dev/android_device_huawei_hi6250
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Vendors:
https://github.com/codeofhonor-dev/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Honor 6X
Contributors
haky 86, HassanMirza01, felix-development
Source Code: https://github.com/codeofhonor-dev, Meticulus and the stuff of CodeOfHonor.
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-04-27
Beta Release Date: 2018-04-27
Created 2018-04-27
Last Updated 2018-04-27

ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.

I'm coming from EliteRom 7.5 and I love AOSPA but there are 2 little problems I have with this rom.
First of all fingerprint doesn't work correctly, no matter how often I press my finger on the sensor it stays at the ~10% mark.
The other problem is that I don't know how to root this rom. I tried installing magisk manager and flashing the zip but I get error 1 in TWRP.
Except this issues it's working very nicely on my device.
Thanks in advance for helping me out

MadMurl0c said:
I'm coming from EliteRom 7.5 and I love AOSPA but there are 2 little problems I have with this rom.
First of all fingerprint doesn't work correctly, no matter how often I press my finger on the sensor it stays at the ~10% mark.
The other problem is that I don't know how to root this rom. I tried installing magisk manager and flashing the zip but I get error 1 in TWRP.
Except this issues it's working very nicely on my device.
Thanks in advance for helping me out
Click to expand...
Click to collapse
10% mark?
Did you entirely remove all the fingerprints before flashing this Tom?
Go back to Elite or Stock, remove all fingerprints and reinstall the Rom
For Root, you can try changing recovery or using an older version of Magisk that worked for you

I am currently reverting back to stock and will try to flash the rom again, I guess I didn't remove the fingerprints before flashing.
I tried Magisk Version 15 and 16 which both worked on EliteRom, I even tried SuperSu which didn't gave me an error message in twrp but It didn't work tho. After flashing the zip there was no "SuperSu" App so I downloaded it from the playstore, the app told me "root not found". Do you know what the cause of this could be?
Edit: Fingerprints are working now But root still doesn't

After I downgrade from emui 8 to emui 5 in 5 minutes now I can fix this rom so expect a build within these days

hoping to try this rom , following for updates

Hey guys I just installed the rom, but I did notice that I don't have access to any Gapps. How to I install them? I'm using TWRP. I was just able to get my unlock code from Honor today, so I unlocked and rooted, and flashed your rom as the first thing, so I'm running a fresh flash of the latest version.

Flash package with Twrp: https://opengapps.org/

Thanks guys, I realized that yesterday right after I posted lol. So far I'm really loving the plain stock-ness of this rom, hopefully it give the device some more life so I won't have to upgrade soon.

MadMurl0c said:
I am currently reverting back to stock and will try to flash the rom again, I guess I didn't remove the fingerprints before flashing.
I tried Magisk Version 15 and 16 which both worked on EliteRom, I even tried SuperSu which didn't gave me an error message in twrp but It didn't work tho. After flashing the zip there was no "SuperSu" App so I downloaded it from the playstore, the app told me "root not found". Do you know what the cause of this could be?
Edit: Fingerprints are working now But root still doesn't
Click to expand...
Click to collapse
Yeah I'm having the same issue to, with no root.

Can someone tell me why this rom is different to all others ? Why is this one using stock vendor and can we easy revert to Emui ? Why don't all others ?
I'm on stock now.

How is the quality of the photos compared to stock rom? It is possible to install Emui camera or other huawei cameras?

** Note **
developments of hi6250 is end reason: switch to another phone, have phone.

** Note **
Developments for hi6250 has been resumed but just for this ROM, sorry for the inconvenience.
I'm already downloading the source for releasing new build but AOSPA will take a wile since have bigger source.

** Note **
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.

Had anyone tried installing Xposed yet?

Support BLL version? Honor 6X

The rom overall is great and smoorh, even F2FS works now
But somehow magisk still doesn't work. It says
Code:
! System installed root detected, mount rw :(
when I try to flash the magisk.zip file.

MadMurl0c said:
The rom overall is great and smoorh, even F2FS works now
But somehow magisk still doesn't work. It says
Code:
! System installed root detected, mount rw :(
when I try to flash the magisk.zip file.
Click to expand...
Click to collapse
Guys to flash magisk or superSU use Meticulus TWRP, other twrp like eliteTwrp show an error when it is recompilling the boot.img

[Rom][Port] Lineage Os for Karbonn K9 Kavach 4G

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer:
Code:
* Your warranty is void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Unofficially ported by me for Karbonn K9 Kavach 4G from moto c.
I don't have a pc that's why I cannot generate a beautiful updater-script for fast installation of the rom. Therefore I used twrp backup and twrp restoration method to make the updater script.
What's working:
- Almost everything
What's not working:
-Volte(Like all other mtk roms , you can use jio4Gvoice app)
Update :In Previous build I used busybox rm -rf command to format system which sometimes not working and the rom installed without erasing the present rom and gives bootloop. In this build this problem is fixed.
Download links>>
Rom(Updated link ): Download
***Make a backup of nvram , Boot , nvdata , system ,data before proceeding***
Instructions: ( 2 methods , use any one )
Method 1 (slow):
1. Wipe data and system from twrp( important otherwise modems will not work )
2. Install the zip.
3. Restore nvram and nvdata
4. Done....
Method 2 (fast)(recommended):
1. Download and extract the zip
2. You will find system.ext4.win and boot.emmc.win
3. Copy them into twrp backup folder(if you know where it is)
4. Wipe data from twrp( important otherwise modems will not work )
5. Restore system and boot and nvram and nvdata
3.done....
Flash twrp recovery if you haven't then visit https://youtu.be/rNgItjvz6FM
Rom is prerooted with magisk.
Minimal Gapps included.
Contributors:
Lineage os
@Bit2boss
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP recovery
Based On: LineageOS
hit thanks if you like this rom..
Also u can donate to help me.Donate
Status: Stable
Release Date: 2020-07-14
2nd release date : 2020-07-24
Working video : https://youtu.be/T9VdSLnNJPA
If anyone want to use this method to create Rom Updater script using twrp backup then feel free to use it . just give me proper credits.

[ROM] Pure Stock Rom [STABLE] - For Galaxy C7 [15-Jan-22]

Pure Stock Rom​​-----------------------------------------------------------------------------------------------​Disclaimer​I am not responsible for bricked devices, dead SD cards, or any malfunction caused by carelessness. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you ! If it works and you are satisfied then I will claim all credits without leaving one​-----------------------------------------------------------------------------------------------​Rom Features​High Performance In A Lite Package
Rebase From Latest Firmware
Pre Rooted & Safety Net Pass
Removed Unwanted Encryption & Stuff
Comes Google Services
Added Samsung Notes
Samsung Apps Working
-----------------------------------------------------------------------------------------------​Steps For Installation & Notes​​
Spoiler: Installation
1) Make sure you have the latest Bootloader​For more information on how to Flash latest Bootloader for C7/C7 Pro, follow the steps mentioned in this thread
Latest Bootloader Flashing Guide​2) Make sure you have the latest TWRP recovery installed​For more information on how to install latest Twrp for C7/C7 Pro follow the steps mentioned in this thread
Twrp Recovery Guide​3) Download the rom and transfer it to your Device​4) Make sure OEM is unlocked in developer settings​To unlock OEM , Go to (settings/about phone/software information) and tap on "build number" 4 times , then go back to settings and you will see "developer options after "about phone" . Click on "developers option" and you will see and option called "OEM Unlock" select/turn that on .​5) Make sure you have at least 15%+ battery left​6) Boot your phone to Twrp recovery​There Are 2 Way To Boot To Recovery
1) By Holding The (Power Button + Volume UP Button + Home Key) When The Device Is Switched Off
2) By Typing "adb reboot recovery" (Without quotes) in adb shell​7) Do a FULL Data Format​Twrp/Wipe/Format Data​8) Install Rom​9) Reboot System​Note : Wait patiently After Rebooting From TWRP After Installing The Rom... There Might Be 1-3 Bootloops during the First boot & It may take A While To Boot to system (7-15 min), After Setting up system make sure to reboot atleast 3 times to make​
-----------------------------------------------------------------------------------------------​Rom Information​Contributors
jesvi
Source Code: https://github.com/Cyborg2017/android_kernel_samsung_msm8953
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest Bootloader, Twrp Recovery, Brain & Time
Based On: Samsung Experience
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2022-01-15
-----------------------------------------------------------------------------------------------​Supported Devices​Galaxy C7
SM-C7000
-----------------------------------------------------------------------------------------------​Downloads​Pure Stock Rom V1
-----------------------------------------------------------------------------------------------​Credits​*jesvi (My Mentor/Teacher)
*Mr.Durgut (For Creating This Entire Rom)
-----------------------------------------------------------------------------------------------​C7 Supports Group​Telegram Discussion Group
Eulah Rom Discussion Group
Eulah Rom's Official Discussion Group Join & get your doubts clarified with the admins & members.. Stick to the rules Supported Devices - ( S20 / S20 + ) - (Exynos) ( C7 / C7 Pro )
t.me
Donation Link
Enes | creating Software | Patreon
www.patreon.com
-----------------------------------------------------------------------------------------------​

,
"creating the entire rom ?"