The July factory image file for the Pixel 3XL is ready at https://dl.google.com/dl/android/aosp/crosshatch-qq3a.200705.002-factory-4f657fc7.zip
i cant seem to get root to work on july with magisk 20.4. wont respond to touch even.
dipstik said:
i cant seem to get root to work on july with magisk 20.4. wont respond to touch even.
Click to expand...
Click to collapse
For each update, I disable all modules prior to update. July update went through fine.
mgp53 said:
For each update, I disable all modules prior to update. July update went through fine.
Click to expand...
Click to collapse
Sounds like you were able to root the July update. Can you confirm?
swieder711 said:
Sounds like you were able to root the July update. Can you confirm?
Click to expand...
Click to collapse
Yes, root method was done exactly as all prior releases.
I disabled all the Magisk modules, rebooted and ran flash-nowipe. My phone got suck at the "G" logo. After restarting it would only go to Fastboot. I tried going back to the Jun release and that failed too.
Now I am doing a factory reset with flash-all and have lost my data. I have a back up of the apps via TiBu and Google drive.
What I thought was going to be a quick up, is now going to take some time to restore!
Seems like some of us are having issues with moving to the July patch. YMMV.
What version of root? 20.4 stable?
swieder711 said:
I disabled all the Magisk modules, rebooted and ran flash-nowipe. My phone got suck at the "G" logo. After restarting it would only go to Fastboot. I tried going back to the Jun release and that failed too.
Now I am doing a factory reset with flash-all and have lost my data. I have a back up of the apps, but it is a few months old. What I thought was going to be a quick up, is now going to take some time to restore!
Seems like some of us are having issues with moving to the July patch. YMMV.
Click to expand...
Click to collapse
Bummer... Did you reboot after disabling the modules ? I always follow to the T from Homeboys guide. There is an OTA method, but I am familiar with
i got it working. i used the canary magisk build to patch my boot image the flashed to both slots, then during first boot i went into safe mode by holding the vol down once the Google animation stats (not when you see G, just the animate and hold til full boot). then while in safe mode i used adb shell and magisk --remove-modules commands.
mgp53 said:
Yes, root method was done exactly as all prior releases.
Click to expand...
Click to collapse
I can root the July update, but I can't get Gravitybox Beta-7 to work. Other modules seem to worked with EdXposed modules.
Does anyone have Gravitybox running on the July update?
swieder711 said:
I can root the July update, but I can't get Gravitybox Beta-7 to work. Other modules seem to worked with EdXposed modules.
Does anyone have Gravitybox running on the July update?
Click to expand...
Click to collapse
No problems with Beta 5 here.
mgp53 said:
No problems with Beta 5 here.
Click to expand...
Click to collapse
Thanks.
What version of Magisk are you running?
This seems to be an issue with Edxposed manager not being able to access modules.list. This was fixed in Magisk 20406. I'm on Magisk 20.400.
I tried the canary release of Magisk manager and module, but that didn't help.
swieder711 said:
Thanks.
What version of Magisk are you running?
This seems to be an issue with Edxposed manager not being able to access modules.list. This was fixed in Magisk 20406. I'm on Magisk 20.400.
I tried the canary release of Magisk manager and module, but that didn't help.
Click to expand...
Click to collapse
I've been on 20.4 for quite a while.
I found Elemental Kernel works nicely with July release.. Stock seems laggy, and overheats.
Related
I've managed to solve all problem by rooting and installing magisk
1. Some apps may not work properly
I have tried every app I used in oreo and each app works fine (I know this is not a solution )
2. Google pay not works
Solution-Google pay works by using a magisk module called
*tezhider4magisk*
https://androidfilehost.com/?fid=5862345805528042557
3. Google play shows device not certified
Solution - Google play shows device is certified using magisk module called
*ClearPlayStoreWithServiesData4Magisk*
https://androidfilehost.com/?fid=890278863836289937
4. Safety net not passed in magisk on open beta 1/2/3
Solution - for safety net to pass in magisk we need to edit a line in build.prop (have to some file explore like es file explorer or root explorer to edit build.prop)
Replace
ro.build.fingerprint=OnePlus/OnePlus6/OnePlus6:9/PKQ1.180716.001/1808301430:user/release-keys
Click to expand...
Click to collapse
With
ro.build.fingerprint=OnePlus/OnePlus6/OnePlus6:8.1.0/OPM1.171019.011/06140300:user/release-keys
Click to expand...
Click to collapse
5. For rooting oxgyen os open beta 1/2/3
Follow guide from developer [Manikandanguru] (all thanks to him?)
https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
Is there a fix yet for aod/ambient display yet?
Gmos24 said:
Is there a fix yet for aod/ambient display yet?
Click to expand...
Click to collapse
Try this maybe? It worked for me on OOS Oreo at least. Didn't try it on P yet but should work I think...
https://www.google.co.in/amp/s/www....always-on-display-oneplus-6-oneplus-5-5t/amp/
For me my nfc is not working for some reason, the option in settings is greyed out and it's causing so many wakelocks that it's also killing my battery.
sahu.prashant said:
Try this maybe? It worked for me on OOS Oreo at least. Didn't try it on P yet but should work I think...
https://www.google.co.in/amp/s/www....always-on-display-oneplus-6-oneplus-5-5t/amp/
Click to expand...
Click to collapse
Doesn't work, crashes display settings.
sahu.prashant said:
Try this maybe? It worked for me on OOS Oreo at least. Didn't try it on P yet but should work I think...
https://www.google.co.in/amp/s/www....always-on-display-oneplus-6-oneplus-5-5t/amp/
Click to expand...
Click to collapse
Edited message to fix the quote to the correct person.
I had to uninstall it on oos ob1 because it was making the display settings crash. I just reinstalled it on hydrogen os beta 4 and it works again however the status bar doesn't turn black. Any idea on how this could be fixed or if it's an easy fix?
Gmos24 said:
Is there a fix yet for aod/ambient display yet?
Click to expand...
Click to collapse
For me aod/ambient display works perfectly
Have you dirty flashed new beta
Try doing a factory reset I hope that will fix it
BossNexusS said:
For me my nfc is not working for some reason, the option in settings is greyed out and it's causing so many wakelocks that it's also killing my battery.
Click to expand...
Click to collapse
Try clearing cache from recovery that solves a lot of issues
Gmos24 said:
Edited message to fix the quote to the correct person.
I had to uninstall it on oos ob1 because it was making the display settings crash. I just reinstalled it on hydrogen os beta 4 and it works again however the status bar doesn't turn black. Any idea on how this could be fixed or if it's an easy fix?
Click to expand...
Click to collapse
Woah! Sorry about that, I guess I should have tested it first on P. I'll flash OOS Open Beta 2 today and then try this mod. Will update if it works.
And status bar issue is a strange one, no idea about that!
Can we get incremental ota update even when unlocked and magisk installed (no twrp)?
I cant boot once I flash Magisk 17.1
Every time I flash magisk, I get in boot loop. I have used official and Blue TWRP both to flash magisk every time I am in boot loop.
I have to reflash everything to get booting. How to root OB 2 now
droid-devz,
Flash Oos ob02, then twrp blu spark.
Reboot to twrp to check if it's working. Flash Magisk 17.1.
Reboot to system.
Veestaai said:
Can we get incremental ota update even when unlocked and magisk installed (no twrp)?
Click to expand...
Click to collapse
Yess i just updated from beta 1 to beta 2 no problem
You'll just lose root everytime you update and have to install just magisk again
Don't install custom recovery that causes problems I guess use the above method (in the thread)
droid-devz said:
I cant boot once I flash Magisk 17.1
Every time I flash magisk, I get in boot loop. I have used official and Blue TWRP both to flash magisk every time I am in boot loop.
I have to reflash everything to get booting. How to root OB 2 now
Click to expand...
Click to collapse
Official twrp doesn't work only blue star twrp works
Veestaai said:
Can we get incremental ota update even when unlocked and magisk installed (no twrp)?
Click to expand...
Click to collapse
Probably not..magisk root rewrites the boot image..safest bet would be to use update manager to flash whole rom updates, then reinstall magisk.
CAUTION:
With the latest update of the BETA 2, once you give the command in fastboot "fastboot boot twrp.img" the phone goes into softbrick with a Qualcomm screen. Has anyone found an alternative method?
JRevenge said:
CAUTION:
With the latest update of the BETA 2, once you give the command in fastboot "fastboot boot twrp.img" the phone goes into softbrick with a Qualcomm screen. Has anyone found an alternative method?
Click to expand...
Click to collapse
does not happen with me !!!
Sadly the build.prop fix for SafetyNet only worked on Open Beta 1.
Anyone got SafetyNet passing on Open Beta 2?
digidude512 said:
Sadly the build.prop fix for SafetyNet only worked on Open Beta 1.
Anyone got SafetyNet passing on Open Beta 2?
Click to expand...
Click to collapse
safety net passes with current canary build of magisk
plug this into the custom section in the magisk settings under update channel: https://raw.githubusercontent.com/topjohnwu/magisk_files/master/canary_builds/canary.json
sorry, hit send before it finished uploading
Hey guys!
I have a rooted pixel 3. I want to upgrade to Android 10 if they release in the next day or so as reported. I've read they made some progress with magisk...
What is my best bet here?
I would love to keep root, but most importantly I want to keep my data and upgrade to Android 10.
I do really want to keep root too.
Is there a guide?
Thanks!
I had Q beta 6 working with current process. Canary channel still only works by patching your boot.IMG. So with twrp still not working on beta 6. All instructions say image flash not possible upgrade path. So until 10 is stable + twrp stable I don't know either. I will just flash 10 and see also. But I really don't expect data to retain, will try though.
kkjb said:
I had Q beta 6 working with current process. Canary channel still only works by patching your boot.IMG. So with twrp still not working on beta 6. All instructions say image flash not possible upgrade path. So until 10 is stable + twrp stable I don't know either. I will just flash 10 and see also. But I really don't expect data to retain, will try though.
Click to expand...
Click to collapse
This is a build of blueline TWRP-3.3.1 from the crosshatch tree that is supposedly working from a follow-up post.
https://forum.xda-developers.com/pi...pixel-3-xl-t3861623/post79995400#post79995400
So is there no way to root just now?
I upgraded from a rooted Android 9 by downloading the factory image for 10 and removing -w from the bat file. All okay, data retained.
But there is no TWRP that works and I tried to fastboot boot a magisk patched boot image from the factory image zip file and it didn't work.
Audioboxer said:
I tried to fastboot boot a magisk patched boot image from the factory image zip file and it didn't work.
Click to expand...
Click to collapse
That works, did it myself. Make sure you are on the latest canary build of Magisk.
TonikJDK said:
That works, did it myself. Make sure you are on the latest canary build of Magisk.
Click to expand...
Click to collapse
Thanks, I was on beta.
Does edxposed work with android 10?
Bubbler4343 said:
Does edxposed work with android 10?
Click to expand...
Click to collapse
It did not work on Android Q Beta 6... just bootlooped. So I am assuming it still does not work for 10.
It does not work for me, guess I should have removed my magisk modules before updating :crying:
TWRP also seems not to work so I see no way to remove these modules now...
Does anyone have a suggestion besides wiping the device?
stilltli said:
It does not work for me, guess I should have removed my magisk modules before updating :crying:
TWRP also seems not to work so I see no way to remove these modules now...
Does anyone have a suggestion besides wiping the device?
Click to expand...
Click to collapse
Did you try the twrp version in post #3?
Just got a notification for upgrading to android 10 , date Tuesday 10.19 pm.
Since there is no xposed available for Android 10, i' ll stick to android 9
Looks like TWRP won't decrypt. Has anyone ADB sideloaded the Canary version of Magisk through TWRP? That was the old workaround when decryption didn't work.
stilltli said:
It does not work for me, guess I should have removed my magisk modules before updating :crying:
TWRP also seems not to work so I see no way to remove these modules now...
Does anyone have a suggestion besides wiping the device?
Click to expand...
Click to collapse
I was under the impression that fastboot of twrp-3.3.1-0-blueline could be used for certain things in 10 (possibly flashing Magisk uninstaller). Also, be sure you have the canary uninstaller.
jd1639 said:
Did you try the twrp version in post #3?
Click to expand...
Click to collapse
I assumed it was for 3XL only, glad you pointed that out! It does boot, however TWRP is not able to mount anything (system, data etc.), so I guess this is a dead end.
sliding_billy said:
I was under the impression that fastboot of twrp-3.3.1-0-blueline could be used for certain things in 10 (possibly flashing Magisk uninstaller). Also, be sure you have the canary uninstaller.
Click to expand...
Click to collapse
As stated above I am unable to access any partitions, so I guess I'm also unable to run the uninstaller :crying:
Thank you both for your suggestions :good:
jd1639 said:
Did you try the twrp version in post #3?
Click to expand...
Click to collapse
I have tried, and it doesn't decrypt from what I see (booted into TWRP, but no file access)
Uhh,so now, android 10 can root or not!?
My English isn't good....
So hope someone tell me root is work or not
Edemilorhea said:
Uhh,so now, android 10 can root or not!?
My English isn't good....
So hope someone tell me root is work or not
Click to expand...
Click to collapse
I rooted 10 with no issues.
sliding_billy said:
I rooted 10 with no issues.
Click to expand...
Click to collapse
Oh cool！！
So just fellow android 9 root step on android 10?
It's worked?
Edemilorhea said:
Oh cool！！
So just fellow android 9 root step on android 10?
It's worked?
Click to expand...
Click to collapse
No, you have to use a Magisk patched boot with canary magisk. Not even close to the old way. No TWRP. Lot of info on here. You might want to start reading before jumping in.
Manually patching the boot image with the canary build "works" - as in - it shows Magisk installed in Magisk Manager and can grant Superuser to apps --- BUT, you can't write to system, so things like Adaway don't work, also Google Pay doesn't work. I'm not sure what you use root for, but this makes it fairly useless to me for now.
I have a 3a with an unlocked bootloader. No twrp. Running Android 10 and Magisk with 5 modules
December update comes out. I didn't install my update the correct way and ended up having to to a factory reset. No big deal but once I fastboot flash my Magisk patched image and try to install my favorite modules...it won't boot. Just sits there with the G And the line spinning underneath.
Example: Clean install, load apps, wifi, install Magisk Manager, fastboot flash Magisk, reboot and flash the zip that swaps my back button over to the right side, restart and it won't complete the boot process. I end up having to factory reset again.
I even tried to install exposed so I could just try and do the things I want through that and it won't boot, once I flash it. I am frustrated and about to just go back to xiaomi or OnePlus but I have really enjoyed this phone.
Can anyone help me? Did the new update kill some of Magisk mods? Or am I missing something?
Magisk modules are working just fine for me on the December patch. Edxposed included.
Sent from my Google Pixel 3a XL using XDA Labs
The issue is the button swapping and it been reported and Tulsadiver has updated his modules for December.
https://forum.xda-developers.com/pixel-3a/themes/adb-mod-installer-t3930381
Skittles9823 said:
Magisk modules are working just fine for me on the December patch. Edxposed included.
Click to expand...
Click to collapse
Mind guiding me how you got edxposed working? Thanks in advance
Royalfox said:
Mind guiding me how you got edxposed working? Thanks in advance
Click to expand...
Click to collapse
I'm using the yahfa version from the pull request in the EdXposed repo and riru from the magisk repo
Sent from my Google Pixel 3a XL using XDA Labs
Skittles9823 said:
I'm using the yahfa version from the pull request in the EdXposed repo and riru from the magisk repo
Click to expand...
Click to collapse
The pull request you mean the canary repo yafha one?
I did the process and EdXposed app shows is up and running but none of my modules work (xinsta, unclutter ig, x screen stabilizer, exi for SwiftKey)
Any ideas ?
Edit : got it working, looked at the guide to get edxposed posted on the 3a guides section, using a specific yafha version for this device
Don't know if you guys saw, but TopJohnWu released a new Canary Magisk for the developer preview.
spotmark said:
Don't know if you guys saw, but TopJohnWu released a new Canary Magisk for the developer preview.
Click to expand...
Click to collapse
Tried it but got a bootloop. Not sure what I did wrong. Used canary magisk manager to patch the factory boot.img and flashed the patched.img with fastboot. Then the bootloop.
Daisymae said:
Tried it but got a bootloop. Not sure what I did wrong. Used canary magisk manager to patch the factory boot.img and flashed the patched.img with fastboot. Then the bootloop.
Click to expand...
Click to collapse
Did you flash to both slots? Maybe that could be the problem?
Sent from my Pixel 3 XL
I had the same problem as Daisymae, I patched the boot image with Canary Debug MM, flashed it to both slots and ended up stuck on the screen with the Google logo bootlooping for around 10 mins each time
Eudeferrer said:
Did you flash to both slots? Maybe that could be the problem?
Sent from my Pixel 3 XL
Click to expand...
Click to collapse
I'll give it a try...
Addendum--Tried both slots=bootloop
Daisymae said:
I'll give it a try...
Addendum--Tried both slots=bootloop
Click to expand...
Click to collapse
Works! Downloaded latest MM then patched file. Root!
kngbn79 said:
I had the same problem as Daisymae, I patched the boot image with Canary Debug MM, flashed it to both slots and ended up stuck on the screen with the Google logo bootlooping for around 10 mins each time
Click to expand...
Click to collapse
Try the very latest Canary MM. It works!
Daisymae said:
Try the very latest Canary MM. It works!
Click to expand...
Click to collapse
I tried last night with the newest MM and still ended up with the same result. Not sure if missing something or not but did notice the patched image was half the size of the unpatched one
kngbn79 said:
I tried last night with the newest MM and still ended up with the same result. Not sure if missing something or not but did notice the patched image was half the size of the unpatched one
Click to expand...
Click to collapse
Try again today. He just pushed a new magisk update. (Today)
Anyone tried this on dp3?
I just clean flashed dp3 and downloaded the latest magisk to test. Nothing but bootloops here.
Anyone care to upload their patched boot?
Update: works fine after all. Redownloaded .apk and made sure to select the canary channel in the app settings.
lafester said:
I just clean flashed dp3 and downloaded the latest magisk to test. Nothing but bootloops here.
Anyone care to upload their patched boot?
Update: works fine after all. Redownloaded .apk and made sure to select the canary channel in the app settings.
Click to expand...
Click to collapse
Update: SDK Platform-Tools: r30.0.0
It roots dp4 but after flashing module it unroots but the module is still active and reflashin boot.img wont reroot at that point
edit: Clean flashing DP4 5 times. lollolol. Each time i would have to copy the stock boot over to the phone an let magisk patch it then copy it back over to pc to flash. I could not use the previous patchedboot.img for whatever reason. And if i factory reset it wouldnt work period. The only module im flashing was busybox. but either way this time after clean flash i went to magisk settings changed the name of magisk package an turned on magisk hide. When restarting after busybox install I still had root. SO step in right direction for now
kngbn79 said:
I had the same problem as Daisymae, I patched the boot image with Canary Debug MM, flashed it to both slots and ended up stuck on the screen with the Google logo bootlooping for around 10 mins each time
Click to expand...
Click to collapse
Cant you use direct method? boot the phone with patched boot and flash direct. This method eliminates most issues.
Update: SDK Platform-Tools: r30.0.1
billyt1 said:
It roots dp4 but after flashing module it unroots but the module is still active and reflashin boot.img wont reroot at that point
edit: Clean flashing DP4 5 times. lollolol. Each time i would have to copy the stock boot over to the phone an let magisk patch it then copy it back over to pc to flash. I could not use the previous patchedboot.img for whatever reason. And if i factory reset it wouldnt work period. The only module im flashing was busybox. but either way this time after clean flash i went to magisk settings changed the name of magisk package an turned on magisk hide. When restarting after busybox install I still had root. SO step in right direction for now
Click to expand...
Click to collapse
Weird I flash the dp4 patched boot without issues
On July 5th update, works great! (Though not all modules work due to the removal of /sbin, etc)
?
Hi guys,
I hvae flashed Android 11 Beta 1 on my Pixel 4 (not XL, i am posting here as we have more activity) , below what i have tried so far and sucessfully worked
to download
https://developer.android.com/preview/download
* Face unlock did not worked at the begining as it told me to delete the old face data first, so i hade to factory rest the phone from settings at the first launch then it worked perfectly
* the issue with Face unlock caused by Android DP4, is gone
* i have successfully rooted through Magisk Canary update, uploaded Magisk manager canary APK, once you install it make sure to change the update channel to canary and then update to the latest version
* Enable Soli worked perfectly with Magisk with v1.2, uploaded
i have no issues at all with this release, and very stable and fast.
hope you enjoying as i do, happy flashing
Can you root with the patched magisk boot.img way?
sruel3216 said:
Can you root with the patched magisk boot.img way?
Click to expand...
Click to collapse
Yes just patch the boot image with the canary magisk and flash it via fastboot.
Google Pay seems hard, im with latest magisk manager. Enabled the following packages in magisk hide. Safety net is ok
com.google.android.ext.services
com.google.android.apps.walletnfcrel
com.google.android.gms
com.google.android.gsf
com.paypal.android.p2pmobile
Click to expand...
Click to collapse
And the database patched with sqlite3 but still i cant add cards
fuarkgl3 said:
yes just patch the boot image with the canary magisk and flash it via fastboot
Click to expand...
Click to collapse
Is canary a special magisk for beta?
sruel3216 said:
Is canary a special magisk for beta?
Click to expand...
Click to collapse
For Android 11 dp and beta yes
Does anyone have the magisk patched boot.img handy?
fuarkgl3 said:
For Android 11 dp and beta yes
Click to expand...
Click to collapse
I'm stock rooted on Android 10. Can I simply flash the 11 system image without the -w, uninstall current magisk app, then install canary magisk?
Thanks
tonyfiore75 said:
Does anyone have the magisk patched boot.img handy?
Click to expand...
Click to collapse
https://drive.google.com/file/d/1-ePR1oRNBjs86WM0V2oiewZ1iNSKpDB3/view?usp=drivesdk
For pixel 4 XL patched with latest magisk canary
sruel3216 said:
I'm stock rooted on Android 10. Can I simply flash the 11 system image without the -w, uninstall current magisk app, then install canary magisk?
Thanks
Click to expand...
Click to collapse
You need to wipe all your data. I had to flash the image with -w twice because face unlock wasn't working so i had to go to stock recovery and wipe from there (titan m wipe) and flash again
fuarkgl3 said:
https://drive.google.com/file/d/1-ePR1oRNBjs86WM0V2oiewZ1iNSKpDB3/view?usp=drivesdk
For pixel 4 XL patched with latest magisk canary
You need to wipe all your data
Click to expand...
Click to collapse
Uhhh damn it. Il wait for some reviews on 11 and see if it's worth wiping for
Does Pokemon go work?
Sent from my Pixel 2 XL using Tapatalk
Gpay doesnt work even with unrooted and locked bootloader. I
cimbajunior said:
Gpay doesnt work even with unrooted and locked bootloader. I
Click to expand...
Click to collapse
It was the same way last year with the Android 10 Betas. The betas are not considered a supported version by Gpay.
Hey anyone on 11 beta 1 and rooted , on dark mode can you share your Settings app screen because I read online the app icons are now dark instead of white but for me only the Wifi (network and internet) icon is dark but all the others are white. See here
https://drive.google.com/file/d/1IY8vRIpm53RckReMq92KgApKdtVc2E1d/view?usp=drivesdk
I don't know if anyone is on Google Fi here but I noticed that after installing the 11 beta my Google Fi VPN no longer seems to work. Anyone else have this experience?
Jiggs82 said:
Hey anyone on 11 beta 1 and rooted , on dark mode can you share your Settings app screen because I read online the app icons are now dark instead of white but for me only the Wifi (network and internet) icon is dark but all the others are white. See here
https://drive.google.com/file/d/1IY8vRIpm53RckReMq92KgApKdtVc2E1d/view?usp=drivesdk
Click to expand...
Click to collapse
Screenshot attached (hopefully).
tonyfiore75 said:
Screenshot attached (hopefully).
Click to expand...
Click to collapse
Hmm weird idk why my icons in settings show mostly white still .. hope I don't have to factory reset ugh lol
cimbajunior said:
Gpay doesnt work even with unrooted and locked bootloader. I
Click to expand...
Click to collapse
yes i have tried to fix gpay but it does not work on dp1 even when cts profile and basicintegrity pass... i have added sq lite and busy box and have even tried the command prompt hack to edit the .db and no go..'
also cannot make bubbles work. when i enable .... and receive a message it does not come thru.
Sweet.
tonyfiore75 said:
I don't know if anyone is on Google Fi here but I noticed that after installing the 11 beta my Google Fi VPN no longer seems to work. Anyone else have this experience?
Click to expand...
Click to collapse
Never mind. I got it fixed. I had to delete the old VPN first. Then I reapplied the Google Fi VPN and it worked. I never had to do that before so that's sort of interesting. I hope this helps someone but hopefully no one has to deal with it at all.
my CTS profile passes, even without Magisk...though I installed cleanslate kernel which is AWESOME even without root.