Related
I had successfully flashed Riru Core module and EdXposed Sandhook through Magisk yesterday. Everything was working fine, safetynet and all that stuff. However, Flat Style Bar Indicator wasn't working perfectly for me. I read that the Yahfa version might help with it, so I installed it without uninstalling Sandhook version first.
But now the phone gets stuck on boot logo indefinitely. I forcibly entered the Fastboot mode and went to TWRP recovery using my laptop. I uninstalled Magisk and reinstalled it. Device booted fine now.
Next, I flashed Riru module only and rebooted. It did reboot.
Next, I installed EdXposed Yahfa. Rebooted but stuck on boot logo again. Uninstalled Magisk and repeated the process with Sandhook. Same result again.
I uninstalled EdXposed using the official zip and tried reinstalling. Still no luck. I don't understand what I am doing wrong. I really want to use Exi and Xposed Edge. Please someone help me with this.
iamMG said:
I had successfully flashed Riru Core module and EdXposed Sandhook through Magisk yesterday. Everything was working fine, safetynet and all that stuff. However, Flat Style Bar Indicator wasn't working perfectly for me. I read that the Yahfa version might help with it, so I installed it without uninstalling Sandhook version first.
But now the phone gets stuck on boot logo indefinitely. I forcibly entered the Fastboot mode and went to TWRP recovery using my laptop. I uninstalled Magisk and reinstalled it. Device booted fine now.
Next, I flashed Riru module only and rebooted. It did reboot.
Next, I installed EdXposed Yahfa. Rebooted but stuck on boot logo again. Uninstalled Magisk and repeated the process with Sandhook. Same result again.
I uninstalled EdXposed using the official zip and tried reinstalling. Still no luck. I don't understand what I am doing wrong. I really want to use Exi and Xposed Edge. Please someone help me with this.
Click to expand...
Click to collapse
As far as I'm aware you HAVE to use sandhook with op7p. It always works for me. I also use exi as well...
skj8100 said:
As far as I'm aware you HAVE to use sandhook with op7p. It always works for me. I also use exi as well...
Click to expand...
Click to collapse
I get that. But the problem is, I am unable to make it work AT ALL. I am getting stuck at Boot logo if EdXposed zip has been flashed through Magisk.
iamMG said:
I get that. But the problem is, I am unable to make it work AT ALL. I am getting stuck at Boot logo if EdXposed zip has been flashed through Magisk.
Click to expand...
Click to collapse
Worst case scenario use this for i know it works:
https://forum.xda-developers.com/oneplus-7-pro/how-to/root-oneplus-7-pro-install-magisk-t3931256
---------- Post added at 05:35 PM ---------- Previous post was at 05:32 PM ----------
skj8100 said:
Worst case scenario use this for i know it works:
https://forum.xda-developers.com/oneplus-7-pro/how-to/root-oneplus-7-pro-install-magisk-t3931256
Click to expand...
Click to collapse
Just make sure follow steps after "xposed" once you get it to boot (wipe, restore, whatever)
skj8100 said:
As far as I'm aware you HAVE to use sandhook with op7p. It always works for me. I also use exi as well...
Click to expand...
Click to collapse
I just installed the yahfa one seems to be running great, I'm just using gravity box, and still passing safety net
skj8100 said:
Worst case scenario use this for i know it works
Click to expand...
Click to collapse
Funnily enough, I used this exact post to install Xposed.
skj8100 said:
Just make sure follow steps after "xposed" once you get it to boot (wipe, restore, whatever)
Click to expand...
Click to collapse
This part doesn't mention anything about wiping the internal storage.
iamMG said:
Funnily enough, I used this exact post to install Xposed.
This part doesn't mention anything about wiping the internal storage.
Click to expand...
Click to collapse
I just meant if ultimately you were unsuccessful in getting it to boot properly as last resort... I assumed you cold get it back to stock rooted- sorry if I was unclear
Anyone else running EdXposed and gravityBox on 9.5.8 and passing safetynet? which version of Edxposed are you running? sandhook or yahfa?
I made a thread to show how to remove magisk modules due to bootloops, check in the guide section.
equlizer said:
Anyone else running EdXposed and gravityBox on 9.5.8 and passing safetynet? which version of Edxposed are you running? sandhook or yahfa?
Click to expand...
Click to collapse
Running Yahfa, safetynet passing.
I just got sandhook installed and gravitybox. Everything working Time to tinker!
iamMG said:
I had successfully flashed Riru Core module and EdXposed Sandhook through Magisk yesterday. Everything was working fine, safetynet and all that stuff. However, Flat Style Bar Indicator wasn't working perfectly for me. I read that the Yahfa version might help with it, so I installed it without uninstalling Sandhook version first.
But now the phone gets stuck on boot logo indefinitely. I forcibly entered the Fastboot mode and went to TWRP recovery using my laptop. I uninstalled Magisk and reinstalled it. Device booted fine now.
Next, I flashed Riru module only and rebooted. It did reboot.
Next, I installed EdXposed Yahfa. Rebooted but stuck on boot logo again. Uninstalled Magisk and repeated the process with Sandhook. Same result again.
I uninstalled EdXposed using the official zip and tried reinstalling. Still no luck. I don't understand what I am doing wrong. I really want to use Exi and Xposed Edge. Please someone help me with this.
Click to expand...
Click to collapse
were you able to make it work?
Dwr3ker said:
were you able to make it work?
Click to expand...
Click to collapse
I had to do a full reset.
I upgraded to Android 10 using a guide from someone who successfully kept root when upgrading from Android Pie to 10. I followed the steps exactly, but I still lost root. I'm using the latest version of TWRP Guacamole for the OnePlus 7 Pro. I fully understand that it's not fully compatible with my phone so I'm wanting to roll back to Pie. My phone currently does not have an OS on it because another guide I followed said to flash TWRP as the boot in the bootloader in order to reboot into TWRP to then reflash the OTA and then TWRP. I did this because TWRP would not mount my storage and therefore could not install or flash anything because it couldn't access storage. That didn't work. So now when I boot normally or into TWRP, it only boots into the bootloader. I need help fixing this because now I'm out of a very nice phone.
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
unrated87 said:
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
Click to expand...
Click to collapse
That did not work. Everytime I hit the hyperlink for the tool, it redirected me to an ad for a network monitoring software called solarwinds.
BUZzZERBeater00 said:
That did not work. Everytime I hit the hyperlink for the tool, it redirected me to an ad for a network monitoring software called solarwinds.
Click to expand...
Click to collapse
Just a few things before you flash. Don't worry about losing root, it's better to uninstall Magisk before upgrading, updates you can flash without uninstalling Magisk, although I wouldn't recommend it. I'm coming from the 5T, and it's basically the same process. The only difference is that I have a device with A/B partitions now
https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-mega-unbrick-guide-hard-bricked-t3934659
blas4me said:
Just a few things before you flash. Don't worry about losing root, it's better to uninstall Magisk before upgrading, updates you can flash without uninstalling Magisk, although I wouldn't recommend it. I'm coming from the 5T, and it's basically the same process. The only difference is that I have a device with A/B partitions now
https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-mega-unbrick-guide-hard-bricked-t3934659
Click to expand...
Click to collapse
Thank you. I'm going to try it when I have time. I had to go through a few links that your initial link let me to. I found this thread. I'm hoping this will work. Sounds a lot like my problem.
https://forum.xda-developers.com/oneplus-3t/how-to/op3t-collection-unbrick-tools-t3896765/page2
blas4me said:
Just a few things before you flash. Don't worry about losing root, it's better to uninstall Magisk before upgrading, updates you can flash without uninstalling Magisk, although I wouldn't recommend it. I'm coming from the 5T, and it's basically the same process. The only difference is that I have a device with A/B partitions now
https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-mega-unbrick-guide-hard-bricked-t3934659
Click to expand...
Click to collapse
I tried using the MSMDownloadTool, but the Qualcomm HS-USB QDLoader 9008 (COM3) driver was grayed out in the device manager. When I would open the MSMDownloadTool, it would not recognize my device, and would not download anything. Any suggestions?
BUZzZERBeater00 said:
Thank you. I'm going to try it when I have time. I had to go through a few links that your initial link let me to. I found this thread. I'm hoping this will work. Sounds a lot like my problem.
https://forum.xda-developers.com/oneplus-3t/how-to/op3t-collection-unbrick-tools-t3896765/page2
Click to expand...
Click to collapse
I fixed it. These links helped me along the way. Thanks again for the initial suggestion!
https://forum.xda-developers.com/one...t3896765/page2
https://piunikaweb.com/2019/05/29/how-to-unbrick-oneplus-7-pro-using-msm-download-tool/
BUZzZERBeater00 said:
I fixed it. These links helped me along the way. Thanks again for the initial suggestion!
https://forum.xda-developers.com/one...t3896765/page2
https://piunikaweb.com/2019/05/29/how-to-unbrick-oneplus-7-pro-using-msm-download-tool/
Click to expand...
Click to collapse
Suggestion, when you get to stock, stay there. If it's taking you this long to figure things out, this is not your thing.
blas4me said:
Suggestion, when you get to stock, stay there. If it's taking you this long to figure things out, this is not your thing.
Click to expand...
Click to collapse
Sorry. It's too late. I already have Magisk installed and Edxposed.
I just installed Edxposed
blas4me said:
I just installed Edxposed
Click to expand...
Click to collapse
Ya. It worked perfectly as long as I flashed Riru - Core, rebooted, then flashed Riru - Edxposed, rebooted. Then installed the Edxposed apk. Flashing both Riru -Core and Riru - Edxposed back-to-back before rebooting put my OnePlus 7 Pro into a bootloop. I had to boot into TWRP and flash a "Magisk in TWRP" module and then in the terminal type "mm for first time" hit enter, and type "c" which put takingmy phone in Core Only Mode. This disabled the modules it out of the bootloop. But then after it reboots, attempt to uninstall the modules, which won't fully work. So basically you'd just have to flash the magisk uninstaller and flash the magisk installer to get rid of the bad modules. Moral of the story is don't flash both Riru - Core and Riru -Edxposed without rebooting between each install. Also, don't just flash the magisk uninstaller and flash the magisk installer to get rid of the bad modules and then not later flash the "Magisk in TWRP" module and disable Core Only Mode. Or just turn it off in Magisk Manager. Modules will install, but they won't work. And they won't uninstall either.
Don't know if you guys saw, but TopJohnWu released a new Canary Magisk for the developer preview.
spotmark said:
Don't know if you guys saw, but TopJohnWu released a new Canary Magisk for the developer preview.
Click to expand...
Click to collapse
Tried it but got a bootloop. Not sure what I did wrong. Used canary magisk manager to patch the factory boot.img and flashed the patched.img with fastboot. Then the bootloop.
Daisymae said:
Tried it but got a bootloop. Not sure what I did wrong. Used canary magisk manager to patch the factory boot.img and flashed the patched.img with fastboot. Then the bootloop.
Click to expand...
Click to collapse
Did you flash to both slots? Maybe that could be the problem?
Sent from my Pixel 3 XL
I had the same problem as Daisymae, I patched the boot image with Canary Debug MM, flashed it to both slots and ended up stuck on the screen with the Google logo bootlooping for around 10 mins each time
Eudeferrer said:
Did you flash to both slots? Maybe that could be the problem?
Sent from my Pixel 3 XL
Click to expand...
Click to collapse
I'll give it a try...
Addendum--Tried both slots=bootloop
Daisymae said:
I'll give it a try...
Addendum--Tried both slots=bootloop
Click to expand...
Click to collapse
Works! Downloaded latest MM then patched file. Root!
kngbn79 said:
I had the same problem as Daisymae, I patched the boot image with Canary Debug MM, flashed it to both slots and ended up stuck on the screen with the Google logo bootlooping for around 10 mins each time
Click to expand...
Click to collapse
Try the very latest Canary MM. It works!
Daisymae said:
Try the very latest Canary MM. It works!
Click to expand...
Click to collapse
I tried last night with the newest MM and still ended up with the same result. Not sure if missing something or not but did notice the patched image was half the size of the unpatched one
kngbn79 said:
I tried last night with the newest MM and still ended up with the same result. Not sure if missing something or not but did notice the patched image was half the size of the unpatched one
Click to expand...
Click to collapse
Try again today. He just pushed a new magisk update. (Today)
Anyone tried this on dp3?
I just clean flashed dp3 and downloaded the latest magisk to test. Nothing but bootloops here.
Anyone care to upload their patched boot?
Update: works fine after all. Redownloaded .apk and made sure to select the canary channel in the app settings.
lafester said:
I just clean flashed dp3 and downloaded the latest magisk to test. Nothing but bootloops here.
Anyone care to upload their patched boot?
Update: works fine after all. Redownloaded .apk and made sure to select the canary channel in the app settings.
Click to expand...
Click to collapse
Update: SDK Platform-Tools: r30.0.0
It roots dp4 but after flashing module it unroots but the module is still active and reflashin boot.img wont reroot at that point
edit: Clean flashing DP4 5 times. lollolol. Each time i would have to copy the stock boot over to the phone an let magisk patch it then copy it back over to pc to flash. I could not use the previous patchedboot.img for whatever reason. And if i factory reset it wouldnt work period. The only module im flashing was busybox. but either way this time after clean flash i went to magisk settings changed the name of magisk package an turned on magisk hide. When restarting after busybox install I still had root. SO step in right direction for now
kngbn79 said:
I had the same problem as Daisymae, I patched the boot image with Canary Debug MM, flashed it to both slots and ended up stuck on the screen with the Google logo bootlooping for around 10 mins each time
Click to expand...
Click to collapse
Cant you use direct method? boot the phone with patched boot and flash direct. This method eliminates most issues.
Update: SDK Platform-Tools: r30.0.1
billyt1 said:
It roots dp4 but after flashing module it unroots but the module is still active and reflashin boot.img wont reroot at that point
edit: Clean flashing DP4 5 times. lollolol. Each time i would have to copy the stock boot over to the phone an let magisk patch it then copy it back over to pc to flash. I could not use the previous patchedboot.img for whatever reason. And if i factory reset it wouldnt work period. The only module im flashing was busybox. but either way this time after clean flash i went to magisk settings changed the name of magisk package an turned on magisk hide. When restarting after busybox install I still had root. SO step in right direction for now
Click to expand...
Click to collapse
Weird I flash the dp4 patched boot without issues
On July 5th update, works great! (Though not all modules work due to the removal of /sbin, etc)
?
Hi guys,
I hvae flashed Android 11 Beta 1 on my Pixel 4 (not XL, i am posting here as we have more activity) , below what i have tried so far and sucessfully worked
to download
https://developer.android.com/preview/download
* Face unlock did not worked at the begining as it told me to delete the old face data first, so i hade to factory rest the phone from settings at the first launch then it worked perfectly
* the issue with Face unlock caused by Android DP4, is gone
* i have successfully rooted through Magisk Canary update, uploaded Magisk manager canary APK, once you install it make sure to change the update channel to canary and then update to the latest version
* Enable Soli worked perfectly with Magisk with v1.2, uploaded
i have no issues at all with this release, and very stable and fast.
hope you enjoying as i do, happy flashing
Can you root with the patched magisk boot.img way?
sruel3216 said:
Can you root with the patched magisk boot.img way?
Click to expand...
Click to collapse
Yes just patch the boot image with the canary magisk and flash it via fastboot.
Google Pay seems hard, im with latest magisk manager. Enabled the following packages in magisk hide. Safety net is ok
com.google.android.ext.services
com.google.android.apps.walletnfcrel
com.google.android.gms
com.google.android.gsf
com.paypal.android.p2pmobile
Click to expand...
Click to collapse
And the database patched with sqlite3 but still i cant add cards
fuarkgl3 said:
yes just patch the boot image with the canary magisk and flash it via fastboot
Click to expand...
Click to collapse
Is canary a special magisk for beta?
sruel3216 said:
Is canary a special magisk for beta?
Click to expand...
Click to collapse
For Android 11 dp and beta yes
Does anyone have the magisk patched boot.img handy?
fuarkgl3 said:
For Android 11 dp and beta yes
Click to expand...
Click to collapse
I'm stock rooted on Android 10. Can I simply flash the 11 system image without the -w, uninstall current magisk app, then install canary magisk?
Thanks
tonyfiore75 said:
Does anyone have the magisk patched boot.img handy?
Click to expand...
Click to collapse
https://drive.google.com/file/d/1-ePR1oRNBjs86WM0V2oiewZ1iNSKpDB3/view?usp=drivesdk
For pixel 4 XL patched with latest magisk canary
sruel3216 said:
I'm stock rooted on Android 10. Can I simply flash the 11 system image without the -w, uninstall current magisk app, then install canary magisk?
Thanks
Click to expand...
Click to collapse
You need to wipe all your data. I had to flash the image with -w twice because face unlock wasn't working so i had to go to stock recovery and wipe from there (titan m wipe) and flash again
fuarkgl3 said:
https://drive.google.com/file/d/1-ePR1oRNBjs86WM0V2oiewZ1iNSKpDB3/view?usp=drivesdk
For pixel 4 XL patched with latest magisk canary
You need to wipe all your data
Click to expand...
Click to collapse
Uhhh damn it. Il wait for some reviews on 11 and see if it's worth wiping for
Does Pokemon go work?
Sent from my Pixel 2 XL using Tapatalk
Gpay doesnt work even with unrooted and locked bootloader. I
cimbajunior said:
Gpay doesnt work even with unrooted and locked bootloader. I
Click to expand...
Click to collapse
It was the same way last year with the Android 10 Betas. The betas are not considered a supported version by Gpay.
Hey anyone on 11 beta 1 and rooted , on dark mode can you share your Settings app screen because I read online the app icons are now dark instead of white but for me only the Wifi (network and internet) icon is dark but all the others are white. See here
https://drive.google.com/file/d/1IY8vRIpm53RckReMq92KgApKdtVc2E1d/view?usp=drivesdk
I don't know if anyone is on Google Fi here but I noticed that after installing the 11 beta my Google Fi VPN no longer seems to work. Anyone else have this experience?
Jiggs82 said:
Hey anyone on 11 beta 1 and rooted , on dark mode can you share your Settings app screen because I read online the app icons are now dark instead of white but for me only the Wifi (network and internet) icon is dark but all the others are white. See here
https://drive.google.com/file/d/1IY8vRIpm53RckReMq92KgApKdtVc2E1d/view?usp=drivesdk
Click to expand...
Click to collapse
Screenshot attached (hopefully).
tonyfiore75 said:
Screenshot attached (hopefully).
Click to expand...
Click to collapse
Hmm weird idk why my icons in settings show mostly white still .. hope I don't have to factory reset ugh lol
cimbajunior said:
Gpay doesnt work even with unrooted and locked bootloader. I
Click to expand...
Click to collapse
yes i have tried to fix gpay but it does not work on dp1 even when cts profile and basicintegrity pass... i have added sq lite and busy box and have even tried the command prompt hack to edit the .db and no go..'
also cannot make bubbles work. when i enable .... and receive a message it does not come thru.
Sweet.
tonyfiore75 said:
I don't know if anyone is on Google Fi here but I noticed that after installing the 11 beta my Google Fi VPN no longer seems to work. Anyone else have this experience?
Click to expand...
Click to collapse
Never mind. I got it fixed. I had to delete the old VPN first. Then I reapplied the Google Fi VPN and it worked. I never had to do that before so that's sort of interesting. I hope this helps someone but hopefully no one has to deal with it at all.
my CTS profile passes, even without Magisk...though I installed cleanslate kernel which is AWESOME even without root.
The July factory image file for the Pixel 3XL is ready at https://dl.google.com/dl/android/aosp/crosshatch-qq3a.200705.002-factory-4f657fc7.zip
i cant seem to get root to work on july with magisk 20.4. wont respond to touch even.
dipstik said:
i cant seem to get root to work on july with magisk 20.4. wont respond to touch even.
Click to expand...
Click to collapse
For each update, I disable all modules prior to update. July update went through fine.
mgp53 said:
For each update, I disable all modules prior to update. July update went through fine.
Click to expand...
Click to collapse
Sounds like you were able to root the July update. Can you confirm?
swieder711 said:
Sounds like you were able to root the July update. Can you confirm?
Click to expand...
Click to collapse
Yes, root method was done exactly as all prior releases.
I disabled all the Magisk modules, rebooted and ran flash-nowipe. My phone got suck at the "G" logo. After restarting it would only go to Fastboot. I tried going back to the Jun release and that failed too.
Now I am doing a factory reset with flash-all and have lost my data. I have a back up of the apps via TiBu and Google drive.
What I thought was going to be a quick up, is now going to take some time to restore!
Seems like some of us are having issues with moving to the July patch. YMMV.
What version of root? 20.4 stable?
swieder711 said:
I disabled all the Magisk modules, rebooted and ran flash-nowipe. My phone got suck at the "G" logo. After restarting it would only go to Fastboot. I tried going back to the Jun release and that failed too.
Now I am doing a factory reset with flash-all and have lost my data. I have a back up of the apps, but it is a few months old. What I thought was going to be a quick up, is now going to take some time to restore!
Seems like some of us are having issues with moving to the July patch. YMMV.
Click to expand...
Click to collapse
Bummer... Did you reboot after disabling the modules ? I always follow to the T from Homeboys guide. There is an OTA method, but I am familiar with
i got it working. i used the canary magisk build to patch my boot image the flashed to both slots, then during first boot i went into safe mode by holding the vol down once the Google animation stats (not when you see G, just the animate and hold til full boot). then while in safe mode i used adb shell and magisk --remove-modules commands.
mgp53 said:
Yes, root method was done exactly as all prior releases.
Click to expand...
Click to collapse
I can root the July update, but I can't get Gravitybox Beta-7 to work. Other modules seem to worked with EdXposed modules.
Does anyone have Gravitybox running on the July update?
swieder711 said:
I can root the July update, but I can't get Gravitybox Beta-7 to work. Other modules seem to worked with EdXposed modules.
Does anyone have Gravitybox running on the July update?
Click to expand...
Click to collapse
No problems with Beta 5 here.
mgp53 said:
No problems with Beta 5 here.
Click to expand...
Click to collapse
Thanks.
What version of Magisk are you running?
This seems to be an issue with Edxposed manager not being able to access modules.list. This was fixed in Magisk 20406. I'm on Magisk 20.400.
I tried the canary release of Magisk manager and module, but that didn't help.
swieder711 said:
Thanks.
What version of Magisk are you running?
This seems to be an issue with Edxposed manager not being able to access modules.list. This was fixed in Magisk 20406. I'm on Magisk 20.400.
I tried the canary release of Magisk manager and module, but that didn't help.
Click to expand...
Click to collapse
I've been on 20.4 for quite a while.
I found Elemental Kernel works nicely with July release.. Stock seems laggy, and overheats.