[Q] Possibly bricked GT-N8010 - Galaxy Note 10.1 Q&A, Help & Troubleshooting

Hey,
I was successfully running LineageOS on my GT-N8010.
However, it froze at one point and I force turned it off, and ever since I just get the 'Firmware upgrade encountered an issue' screen. However, I am still able to get into download mode.
I'm now wanting to get it back to stock so I can re-try LineageOS on it. I have the stock image but if I try to install through ODIN I just get an error(posted below) and also on the tablet I get SW Rev. Invalid magic string.
Any idea how I could try sort it out?
In the details section of the download screen it shows;
ODIN MODE
Product name: GT-N8010
Current Binary: Samsung official
System status: Custom
Log:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Odin requires TAR files not image .
Flash stock rom via Odin .
Sboot.bin fail means you are flashing firmware with an older bootloader than is currently on the device .

JJEgan said:
Odin requires TAR files not image .
Flash stock rom via Odin .
Sboot.bin fail means you are flashing firmware with an older bootloader than is currently on the device .
Click to expand...
Click to collapse
Edit:
Looks like I didn't have the latest version, tried a newer one but it now gets stucks and after about 5mins of trying it stops at system.img;
Logs:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 1746 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Stuck on system.img means odin not recognized your system partition..
And or change USB port change usb cable .

Make sure that you have the least official firmware for your device and if it still fails,
it looks like a eMMC failure.
This problem is very common on the N80XX devices.
I already had to replace hundreds of eMMC's on them.

Related

[Q][HELP][GT-P5110]Flashing Firmware PASS but still firmware upgrade problem

helo..
my tablet gt-p5110
cannot enter recovery (pwr+vol+) and download mode (pwr+vol-), but just stuck in "firmware upgrade encountered an issue, please recovery mode in kies & try again",but the device still connect and sync to odin.
I was using a pit file but when started there is an info from Odin that ''pit partition does not exist''.
when flashing use odin 3.07 with stock rom from samsung-updates.com / or cwm/twrp/chillpilz recovery for my device the flasher complete and pass..but after auto rebooting just got black screen,and if press power got back to firmware upgrade encontered an issue.
here the odin log :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XXCME2_P3100OLBCME2_P3100DXDLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> MLO
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
tired use another odin version just get flashing FAIL and other gt-p3100 still stuck firmware issue
anyone can give me another solusion ?
i aready read all thread in forum xda about flashing/brick/recovery...but still no luck

Please help. Cant not unroot my sm s6.

Hi all,
I have Samsung Galaxy S6 G920F . I am trying to unroot my phone back to its factory settings. I downloaded the fimware and odin however i am getting below error message once i press the start in ODIN. I really dont have any idea what is going on. I tried different USB cables, frimware but didnt work out. Any help is highly appreciated . These are what i am getting ;
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> G920FXXU1AODE_G920FOXE1AODE_G920FXXU1AODE_HOME.tar .md5 is valid.
is this version of firmware lower than the one curently instaled.
i had similar problem
it appears that is was on portugal firmware G920FXXS4DPG2_G920FOXX3DPD1_TPH (latest update of 109MB) and was trying to downgrade to G920FXXU3DPDP_G920FOXX3DPD1_TWO ,and was getting error ''cm sw rev check fail device 4 binary 3''
and smart switch failed because my it was trying TWO_CRO with lower verion.

Help on T-mobile Note 5 SM-N920T failed to flash odin

I have this problem i cant reflash it on odin. Ive already rooted the device because when i get this it has a deep sleep issue so i fix it. After i rooted and install twrp recovery it works fine. But after i accidentally rooted again. It stuck up to boot loop t mobile logo.
Now when im flashin it on odin it say fails en recovery mode says.
SW REV. CHECK FAIL. DEVICE: 4 BINARY 3
Here is the log file i get from odin when im flashing a stock firmware on odin
GT-N920T T-mobile
Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920TUVU3DPG1_N920TTMB3DPG1_N920TUVU3DPG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Somebody help me please? For this fix

Flashing Rom into S6 SM-G920F not working.

Hey guys, thats probaly the wrong place to ask for help, however I got really stuck with Odin3.
I tried to install a custon rom, which I downloaded from sammobile.com, but when I try to flash my phone I get this error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Maybe it's important to know that my phone has currently no OS running, well at least TWRP says that.
I tried 3 different Roms, but nothing seems to work.
I also tried Smart Switch but it does not work either.
I tried it on 2 PC's with the original cable, with other cables and in every Port my PC has.
Thank you for everyone who wwants to help!
its stock rom not custom
have you tried with newer version of Odin?
the latest should be 3.12.3

Cant flash official 7.0. ROM

Hello,
I had the official samsung 6.0.1 rom on my S6 Edge F version and now I tried to install the 7.0 nougat official ROM on the same s6 edge.
This is the error message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin 3.11 and just selection the ROM at AP. And now I cant boot anymore, getting "use smart switch"-message. Why is this happening? How can I fix this?
Thanks in advance.
Turkishflavor said:
Hello,
I had the official samsung 6.0.1 rom on my S6 Edge F version and now I tried to install the 7.0 nougat official ROM on the same s6 edge.
This is the error message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin 3.11 and just selection the ROM at AP. And now I cant boot anymore, getting "use smart switch"-message. Why is this happening? How can I fix this?
Thanks in advance.
Click to expand...
Click to collapse
Take the latest version of Odin. (Odin3 v3.12.3)
https://forum.xda-developers.com/showthread.php?t=2711451
1.wipe
2.Flash with latest Odin bininga59 said you!
3. wipe once again, restart the device!
Done.
Turkishflavor said:
Hello,
I had the official samsung 6.0.1 rom on my S6 Edge F version and now I tried to install the 7.0 nougat official ROM on the same s6 edge.
This is the error message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin 3.11 and just selection the ROM at AP. And now I cant boot anymore, getting "use smart switch"-message. Why is this happening? How can I fix this?
Thanks in advance.
Click to expand...
Click to collapse
what's your region firmware (csc) & baseband you try flashed?
if you have an international model sm-g920F, be careful what firmware you download, dont download the ones that vodafone e.g. creates, take the one for your country without the company name

Categories

Resources