Trying to perform a local upgrade by going to system updates - local upgrade
however even though I have copied the file correctly no matter what i do the phone does NOT see any files
to confirm the file is
- unzipped
- copied in its current folder to the ROOT of the device
I have reset the phone
cache has been wiped too
Any suggestions please
TIA Bart
What do you mean when you say the file is "unzipped"? You are supposed put the zipped file in the root?
tperki said:
What do you mean when you say the file is "unzipped"? You are supposed put the zipped file in the root?
Click to expand...
Click to collapse
apologies the file IS ZIPPED
Have you deleted .jar ending of the file? If not, do it and move .zip file to root directory.
The extension is .zip not jar
Is the file in the Downloads folder?
No it's in the root of the storage
bartjunited said:
No it's in the root of the storage
Click to expand...
Click to collapse
If everything you wrote is true, then I would say that you have downloaded an earlier version than what you have installed.
Or, you have a mismatch between beta and released.
Sent from my OnePlus7Pro using XDA Labs
I downloaded the official A10 release from the OnePlus site and 1st time I did it I was even guided there by OnePlus support.
That doesn't explain why the phone just doesn't see the file.
I've seen online that others have had the same issue too
bartjunited said:
Trying to perform a local upgrade by going to system updates - local upgrade
however even though I have copied the file correctly no matter what i do the phone does NOT see any files
to confirm the file is
- unzipped
- copied in its current folder to the ROOT of the device
I have reset the phone
cache has been wiped too
Any suggestions please
TIA Bart
Click to expand...
Click to collapse
Do you have a OnePlus 7 Pro?
What is your Phone Model?
What version of OxygenOS do you currently have on your phone?
[GUIDE] OnePlus 7 Pro [Region] (MODEL)
One plus 7 pro
I'm in London and got it from EE
Sorry missed some info
One plus 7 pro
GM1920
OS 9.5.11.GM27BA
Btw when I did a factory reset to try and resolve this upgrade I didn't wipe the internal data .
I was gonna try and factory reset yet again but this time wipe all data.
Post reset Ill copy the upgrade zip back to the phone and see if the system update will recognise it.
Do you think this could work?
bartjunited said:
Sorry missed some info
One plus 7 pro
GM1920
OS 9.5.11.GM27BA
Click to expand...
Click to collapse
GM1920: EU 5G OnePlus 7 Pro 5G
Local Upgrade
1.) Download the file OxygenOS 10.0.6 [EU] OnePlus 7 Pro 5G 2.1 GB and copy it to the root of the internal memory
2.) Go to Settings> System> System Updates> Click the gear at the top right> Local Upgrade> Click on the appropriate installation package> Update
3.) After the update is completed, click Restart
4.) The update was successful.
Note If you do not see the firmware file, then check the file extension should be .zip (if you have .zip.jar just rename it by deleting .jar)
Info:
OxygenOS 10.0.6 [EU] OnePlus 7 Pro 5G
P.S.
Exact name of the phone that you have is OnePlus 7 Pro 5G
You don't have to wipe all data.
Do a local upgrade.
Thank you so so so much
The file you asked me to download worked no problem whereas it would not see other zips.
Rebooted in A10 NOW.
IF I have to factory reset now will it go back to 9?
If so I'll just keep the upgrade file on the phone too?
Thank you so much again
bartjunited said:
Thank you so so so much
The file you asked me to download worked no problem whereas it would not see other zips.
Rebooted in A10 NOW.
IF I have to factory reset now will it go back to 9?
If so I'll just keep the upgrade file on the phone too?
Thank you so much again
Click to expand...
Click to collapse
You are currently on Android 10
OxygenOS 10.0.6
If you do a factory reset, you still stay on Android 10.
This method will delete the entire contents of the phone!
P.S
I am glad that everything went well.
Ok that's great
The whole reason I got into this mess was because I spoke to you oneplus saying that my phone would stop recognising the fingerprint and the Google assistant they advised to flash the phone rather than just a factory reset so hopefully now with this cleaner install I should have no problems thank you again
Related
Hi,
Does anyone have the link for the Stock GEM-703L EMUI ROM from Huawei.com?
I would like to completely reflash my device and need a trusted source link.
Thanks in advance.
E--Man said:
Hi,
Does anyone have the link for the Stock GEM-703L EMUI ROM from Huawei.com?
I would like to completely reflash my device and need a trusted source link.
Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/mediapad-x2/general/mediapad-x2-firmware-702l-703l-t3168925
letschky said:
http://forum.xda-developers.com/mediapad-x2/general/mediapad-x2-firmware-702l-703l-t3168925
Click to expand...
Click to collapse
HI Letschky, thanks for the reply. This is a very useful and comprehensive resource! Thanks for putting that together
Unfortunately this does not currently include a Huawei direct link for GEM-703L B112 but only B109. Might you have this for B112? That would be amazing if so.
Never mind, the B109 link is now automatically a B112 link and I believe I have what I need!
Thanks again. To flash this, do I just download it onto a desktop and use HiSuite? Would this remove and reflash EVERY partition on the device? I am looking to flash because I bought this phone second-hand from someone who has already locked the bootloader and I want to be sure it is completely safe.
Thanks.
Download,Copy the Update.App in internal or external Memory in dload Folder,you have no dload folder then create this folder.
Go in settings to Updateprogram -Menu-Local Update and choose the update app and wait until it makes a reboot
letschky said:
Download,Copy the Update.App in internal or external Memory in dload Folder,you have no dload folder then create this folder.
Go in settings to Updateprogram -Menu-Local Update and choose the update app and wait until it makes a reboot
Click to expand...
Click to collapse
Thanks. I had just another couple of quick questions.
* As I said above I bought this device second-hand with the bootloader already unlocked. I then used the Vol Dn + Power to do a wipe on cache and data, and shortly thereafter downloaded and installed update B112 via Settings -> Updater. How is it that Google Services Framework is a system app under "Networked apps"? This leads me to believe my system partition is not "stock" from Huawei.
* If I downloaded and installed update B112 via Settings -> Updater, is that the same as using what I downloaded via the Huawei link you provided and following the instructions in your last post?
Thanks very much
Yes,Google Framework is in System on it and yes this is the same from Huawei Server and is Original Stockrom.
letschky said:
Yes,Google Framework is in System on it and yes this is the same from Huawei Server and is Original Stockrom.
Click to expand...
Click to collapse
Letschky, thanks for this information. I was worried that because GSF was a system app my sys partition was modified but after second thought the likelihood of this is possible but low since the UPDATE.APP flashes every partition besides the data partition which I also wiped when first acquiring the device . As such, the only way the device could be compromised is if something was copied into the data partition between the time I wiped it and when I updated to B112 - low probability.
Please correct me if I am wrong and sorry for being so picky.
Hey Guys,
Im running my Honor 8 EMUI 4.1 FRD-L09C432B120. The device is rooted. Now I get that permanent notification to update on FRD-L09C432B131. I would like to update, but dont know how. After that I would like to update on Android 7 and EMUI 5.0 and root my device again or even not. Dont know yet.
The problem is, that I couldnt find a step by step manual or tutorial how to get the things done. I dont want to crash my device or lost any data, settings or customizations. I hope someone can help me or send me a link. Thank you so far.
Blenderhead69 said:
Hey Guys,
Im running my Honor 8 EMUI 4.1 FRD-L09C432B120. The device is rooted. Now I get that permanent notification to update on FRD-L09C432B131. I would like to update, but dont know how. After that I would like to update on Android 7 and EMUI 5.0 and root my device again or even not. Dont know yet.
The problem is, that I couldnt find a step by step manual or tutorial how to get the things done. I dont want to crash my device or lost any data, settings or customizations. I hope someone can help me or send me a link. Thank you so far.
Click to expand...
Click to collapse
Hi
It is not hard to do the update, and if you follow step by step it will nothing happen and nothing will crash
But since you want to update to Android Nougat 7 and want to have the EMUI 5 you can do it in two different way
First way and maybe very noob friendy and maybe the way to do it if you dont care about the latest possible Nougat 7
That would be in this way
Do it over the phone settings
Just do the given update to MM B131
And it will do the update to B131 and dont need to worry anything
After that one it should give you also an update over the phone settings to B360 wich is nougat android 7
BUT maybe it will give you just a newer version like B380 depanding on the region
For me it updated to B360
This way all you need to do is just check for updates in the phone settings and click on update the phone
After you do the update to Nougat android 7 and EMUI 5 it is recommended to do after that an factory reset
The factory reset you do also from the phone settings and it will wipe all of your data
So do a back up on your PC or on the SD card of your files
The apps you will have to reinstall from play store..
The second way I would recommend to you only if you care to have the very latest nougat wich is B381
If you want the latest like the B381 than you can save your self the trouble to update over the phone settings
Just do this
Download from this post there is an link given to mega uploads
Go to this post and download the latest B381
https://forum.xda-developers.com/showpost.php?p=72183284&postcount=46
When you have downloaded the latest firmware couse you want the very latest
Then extract the ZIP you have downloaded
You will get two ZIP files inside of the big one
Then create on the microSD card one folder with the name dload
Then do some more unzipping
First unzip the update.zip file and put it in the created dload folder on the SD card
You will have to put 3 files in that folder...
Look at the picture in the attachment how the files look like..
After you have moved the 3 files from update.zip to sd card
Dial this in you phone dialer
*#*#2846579#*#*
It will open one new window and than select firmware upgrade
Then select from sd card
It will ask you if you are sure than select yes and it will take few minutes like 6-7 minutes
And it will flash the first 3 files that you copied to the sd card..
The phone will restart from it self
Then delete all the files you have firstly moved to dload folder
Now when it is empty unzip the other full ota ZIP file
It will also give you 3 files like the first time
Like the first time move them to sd card to dload folder
Then again do the dial with the same process again
Select firmware upgrade
Then from SD card
Then select yes I am sure to install from the sd card
Now it will take less time to do the install
After you do this two installs you should do a factory reset
It usally help to fix some bugs wich can or dont have to be after a firmware update
But usally it is recommended to do it..
That would be that..
Just look the picture what files to have in the dload folder not to get confused
If this helps hit Thanks
If you unsure of something ask again
Will help again
thank you for that extensive answer.
brljak83 said:
Just do the given update to MM B131
And it will do the update to B131 and dont need to worry anything
Click to expand...
Click to collapse
But what about the unlocked bootloader, xposed, etc.? Can I just click update with a rooted device?
No. It won't work.
You'll have to flash the stock recovery.
And magisk and such won't work after.
The easiest way is to reflash stock recovery, do all the updates over OTA, and then re-root.
I have ZTE axon 7 mini from UK Carphone Warehouse distribution. It is single sim + micro SD variant (P852A11_UK). It comes with Android 6.0.1 (zte.20161125.112507) out of the box with no update yet. Screenshot of RECOVERY to compare (see attachment).
I read that there is a way to update this phone to Android 7.1 using the specific update files, but my phone could not detect that files. I have tried many of different firmwares with no success.
Finally, I managed to update my phone, and here is how:
0. BACKUP YOUR DATA just in case. Fully charge your phone. I am not responsible of any damage or warranty void if something went wrong. Use at your own risk.
1. Download Android 6.0.1 Spanish firmware ZTE B2017G V1.0.0B09, so '_UK' will be gone afther update.
Download link:
http://download.ztedevice.com/support/product/570/201612221103982/sd/20161222111119358.zip
Mirror (thanks @NewbieGamingYT):
https://drive.google.com/drive/folders/1hYFuTYBHB5SnDeE2KCOHQf_62xr7EqOL
2. Unzip 20161222111119358.zip and find 'update.zip' file, than copy it to root directory of >internal storage< of your phone. I know some instructions says to copy it on SD card - in my case phone can't find it in 'updates' system menu, and it doesn't work in recovery 'update from SD' as well - phone just restarts after 2 seconds.
You can try to use your SD card firstly, but when it fails, just use internal storage.
3. Shut down your phone.
4. Go to RECOVERY - press and hold VOLUME UP button, then press POWER ON. Wait till RECOVERY shows up.
5. Find "Apply update from inner card" - you can navigate using VOL +/- find 'update.zip' and accept using POWER single press.
6. Wait till its updated. Few minutes in my case.
7. Choose "Reboot system now" in RECOVERY.
8. Go to 'Update' menu and check for updates. In current version, it should be B2017G V1.0.0B09 without _UK.
9. Update to V1.0.0B12 via OTA ('update' function in settings) - it should be available - about 450 MB.
9.1 If it's not available, you can download it manually, and place 'update.zip' in root folder of your SD card or INTERNAL storage:
http://disk.myzte.ru/SW/Axon7mini_B12(SD card software).zip
Mirror (thanks @NewbieGamingYT):
https://drive.google.com/drive/folders/1hYFuTYBHB5SnDeE2KCOHQf_62xr7EqOL
10. After updating to V1.0.0B12 (still Android 6.0.1), you can update to Android 7.1.1 easly (ZTE B2017GV2.0.0B09). Download update (link below) and repeat step 9.1.
http://disk.myzte.ru/SW/Axon7mini_Android7(SD card software).zip
Mirror (thanks @NewbieGamingYT):
https://drive.google.com/drive/folders/1hYFuTYBHB5SnDeE2KCOHQf_62xr7EqOL
That's all! Be patient, first boot after (every) update could take even 10-15 minutes. After all you can check again 'update' in settings, you should be able to make OTA update to ZTE B2017GV2.1.0B12 (security patch 01.september.2017).
Much appreciated that's great thanks very much :good:
Nice guide - there apparently is a last step and that is to do a factory reset after updating I have seen other users say all features are properly available after this
I still await my Global version from gearbest with that £90 offer !
"That's all! Be patient, first boot after (every) update could take even 10-15 minutes. After all you can check again 'update' in settings, you should be able to make OTA update to ZTE B2017GV2.0.0B12 (security patch 01.september.2017). "
Isn't it ZTE B2017GV1.2.0B12 instead ZTE B2017GV2.0.0B12 ? DId you misswrite it or am I missing something since I am on 7.1.1 september 2017 but ZTE B2017GV1.2.0B12.
dyabzhee said:
"That's all! Be patient, first boot after (every) update could take even 10-15 minutes. After all you can check again 'update' in settings, you should be able to make OTA update to ZTE B2017GV2.0.0B12 (security patch 01.september.2017). "
Isn't it ZTE B2017GV1.2.0B12 instead ZTE B2017GV2.0.0B12 ? DId you misswrite it or am I missing something since I am on 7.1.1 september 2017 but ZTE B2017GV1.2.0B12.
Click to expand...
Click to collapse
Yes, of course, I made a mistake! Thank you for letting me know and I'm sorry for confusion !
Cheers, thanks very much, just what i was looking for. Worked out perfect.:good::good:
That great on nougat now :good:
Nice! Will this work for other countries with the "carrier" variant of this phone? Or maybe people can figure that out thanks to OP. Considering picking this phone up at PC Mobile in Canada. Cheers.
does it works with dual sim version too?
I had some issues at step #2 - the update.zip was being rejected with "E: footer is wrong". It turns out that the first 2 times I downloaded B09 Spanish firmware it was slightly corrupted (but not enough to prevent extraction).
Third download of the file gave a different checksum and worked for me. MD5 sum of working file is:
20161222111119358.zip: 1FE524FC244D41DBF39A933A8FB9D00F.
Also, the MD5s for steps 9.1 and 10 (these worked first time for me, but took 3 hours):
Axon7mini_B12(SD card software).zip: 3B5737EAA4527490BA351D2C9693EC00
Axon7mini_Android7(SD card software).zip: EEFD9487846778290A850A868630480D
Tried this on a Canadian PC Mobile model to test it . After the first update it bricked.
Geld801 said:
Tried this on a Canadian PC Mobile model to test it . After the first update it bricked.
Click to expand...
Click to collapse
Damn. Thank you for trying!
if i do this, can i unlock my phones bootloader and load a rom from usa?
does this work on the gearbest version?
Geld801 said:
Tried this on a Canadian PC Mobile model to test it . After the first update it bricked.
Click to expand...
Click to collapse
It look like the Canadians will be stuck with MM on the AXON. I use it for music and on WIFI so, it's working well anyway for what I do. I use it as a wifi phone sometimes because the voice is clearer than my VOIP setup.
Hi
I followed your instructions and managed to update to 7.1.1. but m on B09 not B12. Does not offer me any OTA updates. Security patches are from June 17. Any idea how i can update to B12??
Thanks
i just got my axon 7 mini from gearbest and I'm struggling to update to 7.1.1
i have downloaded the update zip from .es .de and eu but when i transfer over to sd card and run the update scan, it doesn't show up
i renamed the zip file to update.zip
pls help
shub said:
i just got my axon 7 mini from gearbest and I'm struggling to update to 7.1.1
i have downloaded the update zip from .es .de and eu but when i transfer over to sd card and run the update scan, it doesn't show up
i renamed the zip file to update.zip
pls help
Click to expand...
Click to collapse
You have to unzip file that you have downloaded and there will be proper zip (update.zip) inside.
saymonek said:
You have to unzip file that you have downloaded and there will be proper zip (update.zip) inside.
Click to expand...
Click to collapse
OMG Holly FUK!!
thank you!
What did I miss I on the June security patch
Hello everyone, I bought this phone about a month ago and using it during this time. Today I decided to install GMS to my phone since I don't have windows I tried to backup with my Mac after few hours later with no result I found that hisuite for Mac is not working for gms and then I setup windows to my Mac. But still I didn't get any result when I restore the hisuite doesn't recognize the backup when I back up another app the backup data doesn't look like what's used for llzplay there are more than 6-7 files appears unlike llzplay. So my question is what should I do to fix this problem. I saw some people said I should factory reset the phone but I've been using this phone for more than a month so I have many apps and datas. Thanks for your helps ?
I'm using 10.0.0.205
Aboutbillionz said:
Hello everyone, I bought this phone about a month ago and using it during this time. Today I decided to install GMS to my phone since I don't have windows I tried to backup with my Mac after few hours later with no result I found that hisuite for Mac is not working for gms and then I setup windows to my Mac. But still I didn't get any result when I restore the hisuite doesn't recognize the backup when I back up another app the backup data doesn't look like what's used for llzplay there are more than 6-7 files appears unlike llzplay. So my question is what should I do to fix this problem. I saw some people said I should factory reset the phone but I've been using this phone for more than a month so I have many apps and datas. Thanks for your helps
I'm using 10.0.0.205
Click to expand...
Click to collapse
You need to unzip the zip files containing LZPlay on a computer first and then transfer them to a USB drive. The Mate 30 Pro cannot extract zip files.
Einwod said:
You need to unzip the zip files containing LZPlay on a computer first and then transfer them to a USB drive. The Mate 30 Pro cannot extract zip files.
Click to expand...
Click to collapse
I could only find 3 files given in the video.
Config, llzplay APK, llzplay.tar
Could you give me a link to the correct files because I tried to extract llzplay.tar after you said but it didn't success.
Thank you
Aboutbillionz said:
I could only find 3 files given in the video.
Config, llzplay APK, llzplay.tar
Could you give me a link to the correct files because I tried to extract llzplay.tar after you said but it didn't success.
Thank you
Click to expand...
Click to collapse
Link is here. I just updated and checked the files. All are included. The 9 apps that must be installed in the correct order following the video here.
Einwod said:
Link is here. I just updated and checked the files. All are included. The 9 apps that must be installed in the correct order following the video here.
Click to expand...
Click to collapse
Thank you so much, after I installed Google play services the number 7 I couldn't delete it I followed the steps and installed 8 and later 9
It works fine but I receive many notifications.
Aboutbillionz said:
Thank you so much, after I installed Google play services the number 7 I couldn't delete it I followed the steps and installed 8 and later 9
It works fine but I receive many notifications.
Click to expand...
Click to collapse
Are you sure you followed the right procedure? You should have normal notifications, not many.
Einwod said:
Are you sure you followed the right procedure? You should have normal notifications, not many.
Click to expand...
Click to collapse
I followed but after I installed 7th APK I couldn't delete Google play services and install 8th
I managed to download the below update from the XDA site for my GM1920 One Plus 7 Pro (Europe model I think)
OnePlus7ProOxygen_21.E.35_OTA_0350_all_2103221233_748eb2d4.zip
When I go to try and do a local system upgrade via the phone I don't see the file.
To confirm
I have NOT unzipped the file
I have placed it in the root of the phone. By that I mean it's NOT in a directory but at the lowest level on the phones storage.
My phone is NOT rooted.
Can I put this on a USB and try the upgrade via that?
TIA Bart
bartjunited said:
I managed to download the below update from the XDA site for my GM1920 One Plus 7 Pro (Europe model I think)
OnePlus7ProOxygen_21.E.35_OTA_0350_all_2103221233_748eb2d4.zip
When I go to try and do a local system upgrade via the phone I don't see the file.
To confirm
I have NOT unzipped the file
I have placed it in the root of the phone. By that I mean it's NOT in a directory but at the lowest level on the phones storage.
My phone is NOT rooted.
Can I put this on a USB and try the upgrade via that?
TIA Bart
Click to expand...
Click to collapse
Hi Bart,
Most of the time it's a simply fix. Check the file name. If it's .jar rename the file to .zip
@soka said:
Hi Bart,
Most of the time it's a simply fix. Check the file name. If it's .jar rename the file to .zip
Click to expand...
Click to collapse
Thanks it's def a. Zip file
bartjunited said:
Thanks it's def a. Zip file
Click to expand...
Click to collapse
Okay, worth a try. Then I can only think of one other reason. The last time I had this problem ,I accidentally downloaded the normal OnePlus 7 OTA and not the pro version.
The reason you can't install it is because the device is a 7 Pro 5G or guacamoleg or OnePlus7ProNR. There isn't Android 11 for the 7 Pro 5G yet. Custom roms are a grey area as modem and rotation doesn't work out of the box and needs porting, and even then A11 roms are out of the question
bartjunited said:
I managed to download the below update from the XDA site for my GM1920 One Plus 7 Pro (Europe model I think)
OnePlus7ProOxygen_21.E.35_OTA_0350_all_2103221233_748eb2d4.zip
When I go to try and do a local system upgrade via the phone I don't see the file.
To confirm
I have NOT unzipped the file
I have placed it in the root of the phone. By that I mean it's NOT in a directory but at the lowest level on the phones storage.
My phone is NOT rooted.
Can I put this on a USB and try the upgrade via that?
TIA Bart
Click to expand...
Click to collapse
Install Oxygen Updater from Google Play and download the update file through it.
Have to work, I use to use it, works fine.
How do I choose the update file via this?
bartjunited said:
How do I choose the update file via this?
Click to expand...
Click to collapse
the app will tell you that there is an update, and you just download it.
Then you'' install it using the upgrade app but using the local update option where you will select that file.
Oh OK app isn't telling me there is an update available .
I got the OS 11 stable Update from the xda site
As I said above Android 11 isn't available for the 7 Pro 5G