Database Info

Bootloop F1f PLEASE HELP!!!!!!

I tried to flash the Stock Firmware from Phone Storage (FAILED AFTER FEW SECS) Flash Stock Firmware and custom rom which is PROJECT SPECTERUM from SD Card (FAILED WITHIN 1 SEC)
I tried using QualCom FlashTool still bootloops. I tried many Firmwares I Have like 5 in my PC none of them works. My recovery is now on stock and my Fastboot is now locked after flashing via QualCom Flashtool. My ColorOS recovery says v1.2 (Rooted) I've been flashing stock firmwares without any luck. I just want to use my phone regularly. I no longer want a rooted phone. Can someone help please?

just flash project spectrum rom with stock recovery
---------- Post added at 08:45 AM ---------- Previous post was at 08:41 AM ----------
it will be good luck

[email protected] said:
just flash project spectrum rom with stock recovery
---------- post added at 08:45 am ---------- previous post was at 08:41 am ----------
it will be good luck
Click to expand...
Click to collapse
after i flash that it will work?

yes..

[email protected] said:
yes..
Click to expand...
Click to collapse
it didn't worked

jhondharen said:
it didn't worked
Click to expand...
Click to collapse
Installation failed also

keep trying to install spectrum with stock recovery. it might fail a couple times but keep trying. once done then flash colour os WITHOUT wiping data or cache

Very Hard Brick NEED HELP!!!

Hi guys i need a big help
I'll try to explain all but i'm not good in English
i bricked my honor 8 L09
it happened when I tried to restore a twrp backup. Twrp can't continue the restore because "cust" can't be extracted
So i tried to restore the backup deselecting cust part
And this was my error
Bootloop
So i tried:
-restored others backup -FAILED-
-used Huawei eRecovery : "getting Package from server failed" -FAILED-
-flashed roms, aosp and emui based, marshmallow and nougat based: can't flash -FAILED-
-flashed boot.img, system.img, recovery.img nothing worked -FAILED-
-extracted cust.img and flashed via adb folllowing this guide: https://forum.xda-developers.com/honor-5x/help/how-restore-cust-partition-t3356769/page2 flashed but nothing works -FAILED-
But now is worse, because i can't get into twrp but only in eRecovery (that doesn't work), and adb flash don't work
What can i do?
Maybe a huawei/honor repair shop can help me?

Follow this guide https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220.
it helps to rebrick also

venugopalu007 said:
Follow this guide https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220.
it helps to rebrick also
Click to expand...
Click to collapse
i can't reboot in twrp now, only in erecovery that doesn't work

Rodiandrea said:
Hi guys i need a big help
I'll try to explain all but i'm not good in English
i bricked my honor 8 L09
it happened when I tried to restore a twrp backup. Twrp can't continue the restore because "cust" can't be extracted
So i tried to restore the backup deselecting cust part
And this was my error
Bootloop
So i tried:
-restored others backup -FAILED-
-used Huawei eRecovery : "getting Package from server failed" -FAILED-
-flashed roms, aosp and emui based, marshmallow and nougat based: can't flash -FAILED-
-flashed boot.img, system.img, recovery.img nothing worked -FAILED-
-extracted cust.img and flashed via adb folllowing this guide: https://forum.xda-developers.com/honor-5x/help/how-restore-cust-partition-t3356769/page2 flashed but nothing works -FAILED-
But now is worse, because i can't get into twrp but only in eRecovery (that doesn't work), and adb flash don't work
What can i do?
Maybe a huawei/honor repair shop can help me?
Click to expand...
Click to collapse
Is your bootloader is in unlocked state?

venugopalu007 said:
Is your bootloader is in unlocked state?
Click to expand...
Click to collapse
yes

Rodiandrea said:
yes
Click to expand...
Click to collapse
which version of emui are you on? before brick

venugopalu007 said:
which version of emui are you on? before brick
Click to expand...
Click to collapse
Before break i was in emui 5.0, but i tried to restore 4.1 twrp nandroid backups too when i tried to solve the brick

Rodiandrea said:
Before break i was in emui 5.0, but i tried to restore 4.1 twrp nandroid backups too when i tried to solve the brick
Click to expand...
Click to collapse
flash this twrp https://www.androidfilehost.com/?fid=24588232905723836
and follow the guide which was given above

how can I flash it? can't flash through recovery or adb...
Edit: now are disappeared the charging screen and animation too, it goes on eRecovery

Rodiandrea said:
how can I flash it? can't flash through recovery or adb...
Edit: now are disappeared the charging screen and animation too, it goes on eRecovery
Click to expand...
Click to collapse
Go to fastboot bro
For fastboot make sure your device is power off now hold the volume down button and insert the usb cable connected to pc , u will boot to bootlader and flash the image.later flash above which i mentioned

venugopalu007 said:
Go to fastboot bro
For fastboot make sure your device is power off now hold the volume down button and insert the usb cable connected to pc , u will boot to bootlader and flash the image.later flash above which i mentioned
Click to expand...
Click to collapse
flashed twrp and i can enter in recovery
but can't wipe nor mount anything
All are invalid argument
I think i messed sometthing following the guide i linked before
Do you know how i can go back and revert changes?
EDIT: Tried to flash aniway the stock rom you linked, but is stuck on write update.app...

Rodiandrea said:
flashed twrp and i can enter in recovery
but can't wipe nor mount anything
All are invalid argument
I think i messed sometthing following the guide i linked before
Do you know how i can go back and revert changes?
EDIT: Tried to flash aniway the stock rom you linked, but is stuck on write update.app...
Click to expand...
Click to collapse
Bro what are you steps taken?
---------- Post added at 06:52 PM ---------- Previous post was at 06:51 PM ----------
Dont care about mount errors

venugopalu007 said:
Bro what are you steps taken?
---------- Post added at 06:52 PM ---------- Previous post was at 06:51 PM ----------
Dont care about mount errors
Click to expand...
Click to collapse
i'm assuming you are talking about what you suggested
So I:
-entered in rescuemode
-used the package you linked and flashed twrp via fastboot
-entered in twrp
-tried to wipe but can't wipe and mount nothing
-tried to flash the stock rom linked in your guide but it flash only oeminfo
If u are talking about the guide I linked, I did all steps (my bad, I think that this is the problem, because the modified file in this guide block me from wipe)
EDIT: just tried to flash via fastboot all the .img one for flash but every single time it says "failed. Command not allowed"

Bro go to twrp > advance wipe (all )
If error again reboot again and format data and again advance wipe.
Now flash this link https://drive.google.com/file/d/0BwXB-CJiljwpS1o4UXo5b1JlRjQ/view
After that do a reset and reboot ,you will be successfully unbricked

Rommco05 said:
I don't read whole post but if flash full firmware zips what happened, you don't need nothing wipe just flash right firmware https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445 check first post
edit: this try if method above don't work provided by venugopalu007
Click to expand...
Click to collapse
My method will work because he wiped the cust .
But your links wont work because of blank cust and vendor files

venugopalu007 said:
Bro go to twrp > advance wipe (all )
If error again reboot again and format data and again advance wipe.
Now flash this link https://drive.google.com/file/d/0BwXB-CJiljwpS1o4UXo5b1JlRjQ/view
After that do a reset and reboot ,you will be successfully unbricked
Click to expand...
Click to collapse
free to not believe me
i was navigating in twrp for wiping and the phone rebooted for its will
it notified me that the ecryption process (wtf????) was interrupted and he asked to reset the phone
i tapped reset and the phone perfomed the classic wipe and now it works
i'm setting now the first info and i think it's on emui 4.1
idk what happened but now work
will update this reply when i'm sure all works
EDIT: confirmed that is emui 4.1 stock and all works
idk what happened but i'm happy

Rodiandrea said:
free to not believe me
i was navigating in twrp for wiping and the phone rebooted for its will
it notified me that the ecryption process (wtf????) was interrupted and he asked to reset the phone
i tapped reset and the phone perfomed the classic wipe and now it works
i'm setting now the first info and i think it's on emui 4.1
idk what happened but now work
will update this reply when i'm sure all works
Click to expand...
Click to collapse
Great now download this http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92101 and copy the update.app to the sd card and make a floder name "dload", and power off the phone and press and hold all three buttons after vibrate release press key ,later it will update , all features will work100% and with locked bootloader , smells as new
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
Rodiandrea said:
free to not believe me
i was navigating in twrp for wiping and the phone rebooted for its will
it notified me that the ecryption process (wtf????) was interrupted and he asked to reset the phone
i tapped reset and the phone perfomed the classic wipe and now it works
i'm setting now the first info and i think it's on emui 4.1
idk what happened but now work
will update this reply when i'm sure all works
EDIT: confirmed that is emui 4.1 stock and all works
idk what happened but i'm happy
Click to expand...
Click to collapse
You flashed my zip , it worked lol

venugopalu007 said:
Great now download this http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92101 and copy the update.app to the sd card and make a floder name "dload", and power off the phone and press and hold all three buttons after vibrate release press key ,later it will update , all features will work100% and with locked bootloader , smells as new
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
You flashed my zip , it worked lol
Click to expand...
Click to collapse
I'm not interested in locking the bootloader for now
i was interested in obtain root and install viper4android and xposed but for some reason i can't flash recovery via fastboot
But i think that after all of this adventure, i will not mod my phone until i'll buy a new model XD
Thanks for all the help, you saved me 300 euros

Rodiandrea said:
I'm not interested in locking the bootloader for now
i was interested in obtain root and install viper4android and xposed but for some reason i can't flash recovery via fastboot
But i think that after all of this adventure, i will not mod my phone until i'll buy a new model XD
Thanks for all the help, you saved me 300 euros
Click to expand...
Click to collapse
You are welocome , do adventure but make a full back up first:good:

venugopalu007 said:
You are welocome , do adventure but make a full back up first:good:
Click to expand...
Click to collapse
I had 3 full backups, but all of 3 had the cust problem that originated all this matters
In the past i swapped over 200 roms for my gs4, i had more than 20 full backups
But this is the first time that they doesn't work

How to Root J7 ⑥ * J710MN * - Android 7 Nougat Stock [Trinidad and Tobago]

After installing the root either SuperSU or Magisk ... When rebooting vibrates 2 times the mobile and jumps this message ...
Verification error .... Can not restart the device. Failed to verify integrity. You need to reset the device to the factory default settings. This will delete all your data
........ RESET.......
This leaves after wanting to root the mobile with either Magisk or SuperSU by TWRP in Nougat 7 TTT in the J710MN ?
PS ... Thanks to...
AL_IRAQI said:
- Flash Magisk/SuperSu
- Flash this zip
That's it
Click to expand...
Click to collapse
----------o-----------o------------o-----------
How to ... Unlock Memory and have Root on the J710MN with Nougat 7
Download Recovery ... TWRP
https://mega.nz/#!39pmUaoT!80UMB85zzYBvmZ4kCdh2DbaK3aQHSF-Z3GbSHtJZeqs
1.- Install the Stock Firmware with Odin
2.- Install TWRP
3.- Enter the Advanced Recovery and install the ... Zip to Unlock Memory
4.- Then Format Data ... YES ...
5.- Restart the mobile
6.- Configure the mobile to suit the user
7.- Turn off the mobile and enter the Recovery
8.- Install the root zip to use (Magisk or SuperSU) ...
9.- Restart the mobile
Enjoy :fingers-crossed:
* Download ... Firmware Nougat 7 *
https://forum.xda-developers.com/galaxy-j7/how-to/galaxy-j7-sm-j710mn-android-7-stock-t3672932
Xposed for Galaxy J7 ⑥ SM-J710MN - Android 7 Nougat Stock
https://forum.xda-developers.com/showthread.php?t=3034811

Flash Magisk/SuperSu
Flash this zip
That's it

AL_IRAQI said:
Flash Magisk/SuperSu
Flash this zip
That's it
Click to expand...
Click to collapse
It works perfect friend, thanks :fingers-crossed:

JHAM2005 said:
It works perfect friend, thank you :fingers-crossed:
Click to expand...
Click to collapse
what recovery u flashed?

what recovery u flashed?

PauloRMag said:
what recovery u flashed?
Click to expand...
Click to collapse
cidneyebruna said:
what recovery u flashed?
Click to expand...
Click to collapse
TWRP for j7xelte
https://eu.dl.twrp.me/j7xelte/

This is exactly what I needed. A definitive guide to root/recovery on my J710MN.
Thank you very much.

AstroDroid421 said:
This is exactly what I needed. A definitive guide to root/recovery on my J710MN.
Thank you very much.
Click to expand...
Click to collapse
Thanks for your comment

I had that message and all i did was format data cacheand dalviks cache and it didnt pop up anymore
---------- Post added 23-09-2017 at 12:13 AM ---------- Previous post was 22-09-2017 at 11:14 PM ----------
I edited a kernel noencription for j710mn just cant make the flashable zip for it

Not work please video tutorial

Trusted face how to install

please someone here can help me to leave the permissive SElinux on android 7, i not getting it..... please

Hello.
Thanks for the procedure.
Works fine, but, if I encrypt the device again after rooting, the system doesn´t work anymore.
Has anyone ever tried to do this?

vmeloang said:
Hello.
Thanks for the procedure.
Works fine, but, if I encrypt the device again after rooting, the system doesn´t work anymore.
Has anyone ever tried to do this?
Click to expand...
Click to collapse
Why do you encrypt it again?

please someone here can help me to leave the permissive SElinux on android 7, i not getting it..... please

hi good aftenoon, i flash the zip no-verity-opt-encrypt-5.1.zip but the data doesnt mount, and try with the super su and give ther error of verification

JHAM2005 said:
TWRP for j7xelte
https://eu.dl.twrp.me/j7xelte/
Click to expand...
Click to collapse
Helpppp

Doesnt work for me. Any update for this? Thanks
---------- Post added at 06:03 AM ---------- Previous post was at 05:58 AM ----------
juanchitox06 said:
Helpppp
Click to expand...
Click to collapse
But its normal that twrp cant mount data. On every installation (example aosp rom) that i did i had that issue but it worked fine

gabyzen said:
Doesnt work for me. Any update for this? Thanks
---------- Post added at 06:03 AM ---------- Previous post was at 05:58 AM ----------
But its normal that twrp cant mount data. On every installation (example aosp rom) that i did i had that issue but it worked fine
Click to expand...
Click to collapse
Good morning bro, i cant format data, in the recovery still appear the error about cant mount data or system.

JHAM2005 said:
It works perfect friend, thanks :fingers-crossed:
Click to expand...
Click to collapse
Where can I find this archive.... zip to unlock memory

TWRP unable to mount storage

I'm finish unlock bl and i want to install custom rom. I already flash TWRP and it have no storage
so I go to wipe and format data (type "yes") now i have TWRP storage.
The problem is when i finish flash rom and i want to go back to TWRP to flash SuperSU, My TWRP storage is gone again.
Xperia XZ E8332

Muciarago said:
I'm finish unlock bl and i want to install custom rom. I already flash TWRP and it have no storage
so I go to wipe and format data (type "yes") now i have TWRP storage.
The problem is when i finish flash rom and i want to go back to TWRP to flash SuperSU, My TWRP storage is gone again.
Xperia XZ E8332
Click to expand...
Click to collapse
please read the instructions carefully for the flashing boot.img and the twrp. i guess you still don't have a patched kernel for your problem.

donedos said:
please read the instructions carefully for the flashing boot.img and the twrp. i guess you still don't have a patched kernel for your problem.
Click to expand...
Click to collapse
How to get the kernel?

check my guide here...
https://forum.xda-developers.com/xp...omo-s0-01j-t3892124/post78724154#post78724154

Use other twrp
---------- Post added at 02:51 PM ---------- Previous post was at 02:51 PM ----------
Don't use official ones

Unable to find global ROM to flash to recovery

I googled my ass off to find an official global rom so that I can use MiiFlash to reflash my poco f2 pro to default rom. I bricked my device with unable to mount /odm and now I want to reflash to default rom with MiiFlash. Where is that rom?

Flacito13 said:
I googled my ass off to find an official global rom so that I can use MiiFlash to reflash my poco f2 pro to default rom. I bricked my device with unable to mount /odm and now I want to reflash to default rom with MiiFlash. Where is that rom?
Click to expand...
Click to collapse
You'll have to do two things, first flash this ( https://www.xda-developers.com/down...poco-f2-pro-official-android-11-beta-1-build/ ) aosp ROM using the mi flash tool and incase you use the flash and lock.bat, you will have to unlock bootloader again using the miunlock tool. secondly you will have to flash this unofficial recovery ( https://androidfilehost.com/?fid=4349826312261761273 ) also change language to english. Then download the miui 12 from xiaomi website ( https://c.mi.com/oc/miuidownload/detail?device=1900380 ) put it in your phones internal memory. Go to the twrp recovery and wipe data + cache. Then flash the miui rom and you're done.
Hope you know all the adb commands for flashing recovery and etc.
Sent from my POCO F2 Pro using Tapatalk

i used files from this site below for miflash on other devices don't know if that's what you need
https://mifirm.net/model/lmi.ttt

koolershaker said:
i used files from this site below for miflash on other devices don't know if that's what you need
https://mifirm.net/model/lmi.ttt
Click to expand...
Click to collapse
those don't work, the only one that works is the first link i gave you, those have to be flashed from the recovery
Sent from my POCO F2 Pro using Tapatalk

Flacito13 said:
I googled my ass off to find an official global rom so that I can use MiiFlash to reflash my poco f2 pro to default rom. I bricked my device with unable to mount /odm and now I want to reflash to default rom with MiiFlash. Where is that rom?
Click to expand...
Click to collapse
The official roms for miflash are here :https://c.mi.com/oc/miuidownload/detail?guide=2
---------- Post added at 02:34 AM ---------- Previous post was at 02:31 AM ----------
Flacito13 said:
I googled my ass off to find an official global rom so that I can use MiiFlash to reflash my poco f2 pro to default rom. I bricked my device with unable to mount /odm and now I want to reflash to default rom with MiiFlash. Where is that rom?
Click to expand...
Click to collapse
The official roms for miflash are here :https://c.mi.com/oc/miuidownload/detail?guide=2

Fixed, I don't know how...steps:
1. format data
2. wipe dalvic and cache
3. reboot recovery
4. Flash xiaomi.eu_multi_HMK30Pro_V12.0.8.0.QJKCNXM_v12-10 (before I always tried xiaomi.eu_multi_HMK30Pro_V12.1.2.0.RJKCNXM_v12-11.zip)
5. error: failed to mount /odm (invalid argument)
6. reboot recovery
7. Flash again ROM QJKCNXM_v12-10
8. successfully installed (no error), but bootloop
9. format data, wipe cache and dalvik
10. reboot recovery
11. Again flash QJKCNXM_v12-10
12. successfully installed