So I was using PixelExperiece ROM and decided to switch back to MIUI. I downloaded latest fastboot ROM from MIUI website, Flashed it using MI FLash Tool.
While flashing my phone displayed "System has been destroyed" in between. And MIFlash tool showed some error.
So, I tried flashing again and MIFlash tool now said Bootloader was locked. (Because lock_all_and_install was selected previously).
Therefore I downloaded MI Bootloader unlock tool. (The phone still shows "System has been destroyed"). Ignoring that warning, I went to fastboot and ran unlocker. To my surprise, after unlocking was complete and phone restarted it booted into MIUI. I thought "System has been destroyed" problem would be solved. But later I realised, my camera was not focusing on close range object. It wasnt focusing at all. Then after playing around to check everything I found out, my camera was not focusing, gyro was not working (No auto rotate and noting in CIT test) neither was my compass working. So there is some kind of problem with my hardware now.
Later I tried flashing same fastboot ROM again hoping it will install fully now and not ending up in "System has been destroyed" error. And I also chose option to not lock bootloader while flashing in MI Flash tool. This time the phone did started on to MIUI but in MI Flash tool it kept showing flashing as status. Even after I disconnected my phone USB cable it said flashing. And those hardware things are still not working.
While using PixelExperience I did changed SELinux mode to make ANXCamera work. Would it (SELinux mode) be a problem for hardware not working? Or is there any other problem?
Thanks in advance for any help.
DragonSlayer7# said:
So I was using PixelExperiece ROM and decided to switch back to MIUI. I downloaded latest recovery ROM from MIUI website, Flashed it using MI FLash Tool.
While flashing my phone displayed "System has been destroyed" in between. And MIFlash tool showed some error.
So, I tried flashing again and MIFlash tool now said Bootloader was locked. (Because lock_all_and_install was selected previously).
Therefore I downloaded MI Bootloader unlock tool. (The phone still shows "System has been destroyed"). Ignoring that warning, I went to fastboot and ran unlocker. To my surprise, after unlocking was complete and phone restarted it booted into MIUI. I thought "System has been destroyed" problem would be solved. But later I realised, my camera was not focusing on close range object. It wasnt focusing at all. Then after playing around to check everything I found out, my camera was not focusing, gyro was not working (No auto rotate and noting in CIT test) neither was my compass working. So there is some kind of problem with my hardware now.
Later I tried flashing same recovery ROM again hoping it will install fully now and not ending up in "System has been destroyed" error. And I also chose option to not lock bootloader while flashing in MI Flash tool. This time the phone did started on to MIUI but in MI Flash tool it kept showing flashing as status. Even after I disconnected my phone USB cable it said flashing. And those hardware things are still not working.
While using PixelExperience I did changed SELinux mode to make ANXCamera work. Would it (SELinux mode) be a problem for hardware not working? Or is there any other problem?
Thanks in advance for any help.
Click to expand...
Click to collapse
Wait what u said u flashed recovery rom via mi flash ? U have to flash persist.img (u will find this in your fastboot rom) from custom recovery in system/persist partition. Thats it.
hackermssharma said:
Wait what u said u flashed recovery rom via mi flash ? U have to flash persist.img (u will find this in your fastboot rom) from custom recovery in system/persist partition. Thats it.
Click to expand...
Click to collapse
Im sorry, my mistake. I flased fastboot ROM only. Not recovery. MIFlash tool won't allow you to flash recovery ROM at all.
DragonSlayer7# said:
Im sorry, my mistake. I flased fastboot ROM only. Not recovery. MIFlash tool won't allow you to flash recovery ROM at all.
Click to expand...
Click to collapse
Mmmm... No need to worry extract persist.img from fastboot rom folder and flash via OF recovery in system/persist partition. Then boot u get all your sensors back.
hackermssharma said:
Mmmm... No need to worry extract persist.img from fastboot rom folder and flash via OF recovery in system/persist partition. Then boot u get all your sensors back.
Click to expand...
Click to collapse
Instead of fixing existing sensors, flashing persist.img screwed up my wifi and hotspot. After flashing whole fastboot ROM againg they are now working. But other sensors are still not working.
DragonSlayer7# said:
Instead of fixing existing sensors, flashing persist.img screwed up my wifi and hotspot. After flashing whole fastboot ROM againg they are now working. But other sensors are still not working.
Click to expand...
Click to collapse
Really? I mean i used same method last time for my sensors to work again and that worked for me. Next workaround is u should clean flash miui 10 fastboot rom then update to miui 11 using updater app. Hope it should work for u.
flashing persist.img worked for me.
hackermssharma said:
Really? I mean i used same method last time for my sensors to work again and that worked for me. Next workaround is u should clean flash miui 10 fastboot rom then update to miui 11 using updater app. Hope it should work for u.
Click to expand...
Click to collapse
I flashed same MIUI fastboot ROM again, and miraculously all sensors started working again.:good::good:
DragonSlayer7# said:
I flashed same MIUI fastboot ROM again, and miraculously all sensors started working again.:good::good:
Click to expand...
Click to collapse
Great ??
Sensors
DragonSlayer7# said:
I flashed same MIUI fastboot ROM again, and miraculously all sensors started working again.:good::good:
Click to expand...
Click to collapse
I am also facing the same problem (sensors are not working) after i switched back from Pixel Experience to MIUI 11. Though i read all replies i did get some ideas but not clearly. Can you please little explain how to do it. Step by step method explanation will be much appriciated !! (only installation part, i have all required software and ROM ready for fastboot) I am just not clear how fix my sensors.
--------------------------------------------------------------
EDIT: No need guide. I understood how to do it. Some the things mentioned in reply were new for me so it was hard time for me to understand?.. I am new to Redmi phone
Widevine L1
hackermssharma said:
Mmmm... No need to worry extract persist.img from fastboot rom folder and flash via OF recovery in system/persist partition. Then boot u get all your sensors back.
Click to expand...
Click to collapse
Well i just got to know that by flashing 'persist.img' from a recovery will void Widevine L1 certification (Netflix with no HD, also other HD content streaming platform that requires Widevine L1 certification). I heard it will be permanent warrenty void and i don't know it can be fixed or not.
Azhar001 said:
I am also facing the same problem (sensors are not working) after i switched back from Pixel Experience to MIUI 11. Though i read all replies i did get some ideas but not clearly. Can you please little explain how to do it. Step by step method explanation will be much appriciated !! (only installation part, i have all required software and ROM ready for fastboot) I am just not clear how fix my sensors.
--------------------------------------------------------------
EDIT: No need guide. I understood how to do it. Some the things mentioned in reply were new for me so it was hard time for me to understand?.. I am new to Redmi phone
Click to expand...
Click to collapse
This persist.img thing might work for you or might not.
The full proof way is to reinstall Pixel Experience (Android 10) so that you get your sensors up and running again, then flash MIUI 10 and upgrade to MIUI 11 using system updater app.
Azhar001 said:
Well i just got to know that by flashing 'persist.img' from a recovery will void Widevine L1 certification (Netflix with no HD, also other HD content streaming platform that requires Widevine L1 certification). I heard it will be permanent warrenty void and i don't know it can be fixed or not.
Click to expand...
Click to collapse
Its fine. Just install Netflix from ApkMirror (not from Google Play) and it should work.
Azhar001 said:
Well i just got to know that by flashing 'persist.img' from a recovery will void Widevine L1 certification (Netflix with no HD, also other HD content streaming platform that requires Widevine L1 certification). I heard it will be permanent warrenty void and i don't know it can be fixed or not.
Click to expand...
Click to collapse
Also if you are coming back to MIUI, use this method...
DragonSlayer7# said:
This persist.img thing might work for you or might not.
The full proof way is to reinstall Pixel Experience (Android 10) so that you get your sensors up and running again, then flash MIUI 10 and upgrade to MIUI 11 using system updater app.
Click to expand...
Click to collapse
DragonSlayer7# said:
This persist.img thing might work for you or might not.
The full proof way is to reinstall Pixel Experience (Android 10) so that you get your sensors up and running again, then flash MIUI 10 and upgrade to MIUI 11 using system updater app.
Click to expand...
Click to collapse
should i flash MIUI 10 using custom recovery or fastboot after reinstalling Pixel Experience ?
Azhar001 said:
should i flash MIUI 10 using custom recovery or fastboot after reinstalling Pixel Experience ?
Click to expand...
Click to collapse
Fastboot ROM using MIFlashTool
DragonSlayer7# said:
Fastboot ROM using MIFlashTool
Click to expand...
Click to collapse
okay, i willl let you know if it works
I think you should try reflashing the stock firmware using the Mi Flash and select wipe data option.
Sent from my Redmi Note 7 Pro using Tapatalk
DragonSlayer7# said:
Fastboot ROM using MIFlashTool
Click to expand...
Click to collapse
I got all the sensors back again, everything working fine.
Here is what is did (using PC):
1) i installed Pixek Experience ROM (Android 10) using ADB Fastboot method.
Pros: Every sensors started to work, back to normal.
Cons: None i noticed.
2) Then i turn off the phone and entered into fastboot mode
3) I flashed MIUI 10 fastboot ROM using MIFlash Tool. Though i didn't get the "Success" message on MIFlash Tool but phone booted itself (did show MIUI 10 during boot up, and Set Up screen was appearing) so i assumed flashing was complete. Then i unplugged phone from USB cable.
After setup,
Pros: Every sensors was working perfectly fine.
Cons: None i noticed.
4) i updated from MIUI 10 to MIUI 11 using System update on phone. Now i am on MIUI 11 and everything works FINE!!
So what i found is there is some problem with MIUI 11 fastboot ROM itself. Directly flashing MIUI 11 fastboot ROM is the reason sensors stops working!!
Azhar001 said:
I got all the sensors back again, everything working fine.
Here is what is did (using PC):
1) i installed Pixek Experience ROM (Android 10) using ADB Fastboot method.
Pros: Every sensors started to work, back to normal.
Cons: None i noticed.
2) Then i turn off the phone and entered into fastboot mode
3) I flashed MIUI 10 fastboot ROM using MIFlash Tool. Though i didn't get the "Success" message on MIFlash Tool but phone booted itself (did show MIUI 10 during boot up, and Set Up screen was appearing) so i assumed flashing was complete. Then i unplugged phone from USB cable.
After setup,
Pros: Every sensors was working perfectly fine.
Cons: None i noticed.
4) i updated from MIUI 10 to MIUI 11 using System update on phone. Now i am on MIUI 11 and everything works FINE!!
So what i found is there is some problem with MIUI 11 fastboot ROM itself. Directly flashing MIUI 11 fastboot ROM is the reason sensors stops working!!
Click to expand...
Click to collapse
Yes, its kernel problem. It happens if you are flashing MIUI 11 based on Android Pie from any AOSP based ROM running Android 10.
Related
Hi there,
I am encountering wifi connectivity issues.
I first installed the mokee (android v6) rom and wifi worked great, howevery using the phone to make calls rebooted the device.
Then I tried many different roms including CM13 and CM12 roms, MIUI.eu rom, Resurection remix rom and others.
For each of those wifi does not connect, which is very frustrating. It attempts connecting then just stays on "saved". :crying:
When I flash the device back to miui7.1.4 via this tutorial Wifi works.
But then I install another rom and wifi gets broken again.
Do you guys have any suggestion?
Thanks
i have the same issue since friday, but for me wifi doesn't work even with the fastboot rom. any idea?
Ferroccio said:
i have the same issue since friday, but for me wifi doesn't work even with the fastboot rom. any idea?
Click to expand...
Click to collapse
I guess I would suggest trying another xiaomi original rom.
I managed to get the wifi working by flashing the original rom via the tutorial above, and flashing the "global" rom from xiaomi.eu right after (without ever booting the first rom). I also managed to get the wifi working with the CM13.0 rom from TeamSuperLuminal.
try wifi fix, search google play
tried, but did not work
bboy97253 said:
I guess I would suggest trying another xiaomi original rom.
I managed to get the wifi working by flashing the original rom via the tutorial above, and flashing the "global" rom from xiaomi.eu right after (without ever booting the first rom). I also managed to get the wifi working with the CM13.0 rom from TeamSuperLuminal.
Click to expand...
Click to collapse
but now wifi works for you?
Ferroccio said:
but now wifi works for you?
Click to expand...
Click to collapse
Yes it worked after doing this operation; flash stock => unlock => flash cutom rom (without ever booting the stock rom).
However, not all custom roms seem to make wifi work. As mentioned I have the Xiaomi.eu rom and CM13.0 (not 13.1) that work with wifi. But I haven't tried many more.
I hope it helps you out. Did you manage to get wifi back from flashing stock changing the version of the rom?
bboy97253 said:
Yes it worked after doing this operation; flash stock => unlock => flash cutom rom (without ever booting the stock rom).
However, not all custom roms seem to make wifi work. As mentioned I have the Xiaomi.eu rom and CM13.0 (not 13.1) that work with wifi. But I haven't tried many more.
I hope it helps you out. Did you manage to get wifi back from flashing stock changing the version of the rom?
Click to expand...
Click to collapse
so you have flash the xiaomi.eu after the stock? (between point 4 and 5 of the guide)
Ferroccio said:
so you have flash the xiaomi.eu after the stock? (between point 4 and 5 of the guide)
Click to expand...
Click to collapse
Not exactly, if you refer to the tutorial I entirely skipped step 5 and 6. Here is what's left:
1. Downgrade your Mi4c by flashing any image from the list above via the "Updater" app (use top right icon to select image).
2. Reboot into fastboot mode (Power + Vol Down) until you see the MIUI rabbit and "FASTBOOT"
3. Command: fastboot oem edl (this brings your device in a kind of emergency recovery state) -> the device does only show a black screen. Do the next step.
4. Use MiFlash to flash 6.1.7 image (Browse -> select the "images" directory of the 6.1.7 package and start flashing)
7. Reboot into fastboot mode (Power + Vol Down)
8. Command: fastboot oem unlock -> at this point you should have an unlocked bootloader
9. Now install TWRP and your custom ROM
To be honest, I have no idea why, but that's how it worked for me. I hope it works for you too
Let me know the result.
bboy97253 said:
Not exactly, if you refer to the tutorial I entirely skipped step 5 and 6. Here is what's left:
1. Downgrade your Mi4c by flashing any image from the list above via the "Updater" app (use top right icon to select image).
2. Reboot into fastboot mode (Power + Vol Down) until you see the MIUI rabbit and "FASTBOOT"
3. Command: fastboot oem edl (this brings your device in a kind of emergency recovery state) -> the device does only show a black screen. Do the next step.
4. Use MiFlash to flash 6.1.7 image (Browse -> select the "images" directory of the 6.1.7 package and start flashing)
7. Reboot into fastboot mode (Power + Vol Down)
8. Command: fastboot oem unlock -> at this point you should have an unlocked bootloader
9. Now install TWRP and your custom ROM
To be honest, I have no idea why, but that's how it worked for me. I hope it works for you too
Let me know the result.
Click to expand...
Click to collapse
nope. once again wifi still doesn't work. Which Custom rom have you flashed? the last miui 7 xiaomi.eu rom?
i tried with cm13.0
edit: i started the procedure once again, but this time with the xiaomi.eu rom (6.6.23). now wifi works
For the stock rom I used V7.1.4.0.LXKCNCK
and for the custom rom I first used the xiaomi.eu miui7 rom, although the new miui8 rom works as well for me.
There is another thing I did that might have influenced something (again, I really don't know anything about what action does what but I tried a bunch of different stuff).
I used the stock recovery (after flashing stock) to do a factory reset (or something equivalent, I don't really remember because I only did this once).
You could give it a try before flashing the custom rom.
But for me wifi worked everytime I flashed stock, so it might be different than you.
Does wifi work after flashing stock for you? Did you every have wifi on the device?
bboy97253 said:
For the stock rom I used V7.1.4.0.LXKCNCK
and for the custom rom I first used the xiaomi.eu miui7 rom, although the new miui8 rom works as well for me.
There is another thing I did that might have influenced something (again, I really don't know anything about what action does what but I tried a bunch of different stuff).
I used the stock recovery (after flashing stock) to do a factory reset (or something equivalent, I don't really remember because I only did this once).
You could give it a try before flashing the custom rom.
But for me wifi worked everytime I flashed stock, so it might be different than you.
Does wifi work after flashing stock for you? Did you every have wifi on the device?
Click to expand...
Click to collapse
probably a data wipe, but after or before the unlock command?
---------- Post added at 05:15 PM ---------- Previous post was at 04:54 PM ----------
the real problem is that with your guide i have wifi, but the memory is "only" 7,76GB, instead of 25GB...
That's exactly what happened to me too, and that's also when I started freaking out.
Then I found out that doing the restore from the stock recovery fixed the memory space issue. I don't recall the source, though. You'll have to play around with it and search online for an alternative.
bboy97253 said:
That's exactly what happened to me too, and that's also when I started freaking out.
Then I found out that doing the restore from the stock recovery fixed the memory space issue. I don't recall the source, though. You'll have to play around with it and search online for an alternative.
Click to expand...
Click to collapse
ok, but are you enter in stock recovery before or after the unlock command?
before but I don't think matters much
Ok, i resolved. Simply in the recovery i made a wipe cache and a factory reset. Now i see all the internal storage and WiFi is ok. I am on xiaomi.eu 6.6.23 and i am scared to flash cyano...
Inviato dal mio Mi-4c utilizzando Tapatalk
Nice! You can try to flash Cyanogen rom if you do a full backup via TWRP first. I recommend you do one now so you can return to a stable state later on
I'm using the latest Miui8 rom, and I think it's good enough for me. There are a few things to learn to get around but in the end it does the same thing.
I have face a problem recently, after few hours inactivity with my phone, once I want to work with my phone the screen doesnt turn on while back light of back and recent bottom is on, it takes few minutes to turn on or sometimes screen flashes on and off
I have faced this issue on Epic rom/ Lineage rom
No such problems on Lineage. Try clean flash with System, Data, Cache, Dalvik and Vendor wipes.
zaqm said:
No such problems on Lineage. Try clean flash with System, Data, Cache, Dalvik and Vendor wipes.
Click to expand...
Click to collapse
Ok, I will flash lineage again
do i need to flash latest firmware of miui 10 after flashing lineage?
You need to flash it first v10.2.3.0 https://sourceforge.net/projects/xi...V10.2.3.0.OCHCNFK_0b0fb42fee_8.1.zip/download Then flash Lineage and Gapps. NOTE that after build 05/04 you need the unofficial twrp posted in the Lineage thread.
zaqm said:
You need to flash it first v10.2.3.0 https://sourceforge.net/projects/xi...V10.2.3.0.OCHCNFK_0b0fb42fee_8.1.zip/download Then flash Lineage and Gapps. NOTE that after build 05/04 you need the unofficial twrp posted in the Lineage thread.
Click to expand...
Click to collapse
flashed as you mentioned with your offered recovery but after 6 hours working with the phone, again same problem accured!
amir_loh66 said:
flashed as you mentioned with your offered recovery but after 6 hours working with the phone, again same problem accured!
Click to expand...
Click to collapse
I forced restart the phone by pressing power button, around 3 seconds after showing lineage logo screen turns off again!
please let me know what should I do
amir_loh66 said:
I forced restart the phone by pressing power button, around 3 seconds after showing lineage logo screen turns off again!
please let me know what should I do
Click to expand...
Click to collapse
Clean flash xiaomi.eu rom or official fastboot rom with MiFlash to exclude a possible hardware fault with the display. Pay attention if you use MiFlash not to relock the bootloader.
zaqm said:
Clean flash xiaomi.eu rom or official fastboot rom with MiFlash to exclude a possible hardware fault with the display. Pay attention if you use MiFlash not to relock the bootloader.
Click to expand...
Click to collapse
Shoud it be eu rom? I have a downloaded latest stable global miui rom, can I flash that?
amir_loh66 said:
Shoud it be eu rom? I have a downloaded latest stable global miui rom, can I flash that?
Click to expand...
Click to collapse
You can use the global version too but flash the fastboot rom with MiFlash - make sure not to select clean flash and lock
zaqm said:
You can use the global version too but flash the fastboot rom with MiFlash - make sure not to select clean flash and lock
Click to expand...
Click to collapse
It got worst when I flashed with Mi flash , screen goes off when os comes up
I checked the issue with a repairman, he said it isnt software problem, is it hardware problem,
He said 90% it is related to CPU and 10% is relates to Hard problem (as sometimes phone freezes during loading or in recovery status), earthier ways main board should be replaced
amir_loh66 said:
It got worst when I flashed with Mi flash , screen goes off when os comes up
I checked the issue with a repairman, he said it isnt software problem, is it hardware problem,
He said 90% it is related to CPU and 10% is relates to Hard problem (as sometimes phone freezes during loading or in recovery status), earthier ways main board should be replaced
Click to expand...
Click to collapse
Sorry to hear that. At least you know what's the probable cause. It's time for a replacement.
zaqm said:
Sorry to hear that. At least you know what's the probable cause. It's time for a replacement.
Click to expand...
Click to collapse
yes, it seems so
thanks for your time and replies:good:
Hi guys,
I made a mistake installing the Android 11 firmware update and afterwards flashing TWRP and installing Magisk.
Second mistake because I couldn't boot I flashed an old Fastboot ROM, but that doesn't help me.
Can anyone please point me to the fastboot rom for android 11 update?
Thank you very much.
ConsoleHax said:
Hi guys,
I made a mistake installing the Android 11 firmware update and afterwards flashing TWRP and installing Magisk.
Second mistake because I couldn't boot I flashed an old Fastboot ROM, but that doesn't help me.
Can anyone please point me to the fastboot rom for android 11 update?
Thank you very much.
Click to expand...
Click to collapse
Did you ever get any help? I am in the same boat.
ConsoleHax said:
Hi guys,
I made a mistake installing the Android 11 firmware update and afterwards flashing TWRP and installing Magisk.
Second mistake because I couldn't boot I flashed an old Fastboot ROM, but that doesn't help me.
Can anyone please point me to the fastboot rom for android 11 update?
Thank you very much.
Click to expand...
Click to collapse
I guess the best way to go back to stock is using msmtool you can find it here: with android 10 for international and European version: Thread '[OP7PRO][LATEST OOS 10.3.8 GM21AA | OOS 10.0.10 GM21BA] Collection of unbrick tools' https://forum.xda-developers.com/t/...0-gm21ba-collection-of-unbrick-tools.3956595/
Piricho said:
Did you ever get any help? I am in the same boat.
Click to expand...
Click to collapse
If you ended with a blinking TWRP just flash the stock/rooted boot.img if you are using stable you can obtain it here(Post in thread 'Android 11 Release - Finally!' https://forum.xda-developers.com/t/android-11-release-finally.4251267/post-84717089)
Or if you are on a Open Beta here: Thread 'OxygenOS Android 11 Betas (OnePlus 7 Pro) released (Open Beta 4 now available)' https://forum.xda-developers.com/t/...o-released-open-beta-4-now-available.4221067/
RokCruz said:
I guess the best way to go back to stock is using msmtool you can find it here: with android 10 for international and European version: Thread '[OP7PRO][LATEST OOS 10.3.8 GM21AA | OOS 10.0.10 GM21BA] Collection of unbrick tools' https://forum.xda-developers.com/t/...0-gm21ba-collection-of-unbrick-tools.3956595/
If you ended with a blinking TWRP just flash the stock/rooted boot.img if you are using stable you can obtain it here(Post in thread 'Android 11 Release - Finally!' https://forum.xda-developers.com/t/android-11-release-finally.4251267/post-84717089)
Or if you are on a Open Beta here: Thread 'OxygenOS Android 11 Betas (OnePlus 7 Pro) released (Open Beta 4 now available)' https://forum.xda-developers.com/t/...o-released-open-beta-4-now-available.4221067/
Click to expand...
Click to collapse
Hey,
I bricked my OP7 after what seemed like successfully installing and using Android 11. I am getting the Teamwin blinking brick.
This(
) seems like something I can do- flashing Fastboot ROM(even though I'll lose data, but wth). Can you please tell me if this comment of yours applies in my case- i.e. is the link you are suggesting for Android 11 Fastboot ROM valid?
saurabh_op7 said:
Hey,
I bricked my OP7 after what seemed like successfully installing and using Android 11. I am getting the Teamwin blinking brick.
This(
) seems like something I can do- flashing Fastboot ROM(even though I'll lose data, but wth). Can you please tell me if this comment of yours applies in my case- i.e. is the link you are suggesting for Android 11 Fastboot ROM valid?
Click to expand...
Click to collapse
Just flash stock boot.img
RokCruz said:
Just flash stock boot.img
Click to expand...
Click to collapse
As a rain check, as I am new to this, and don't want to screw up more,
You mean I can use this method-
Restore OnePlus 7/7T/7T Pro to Stock via Fastboot Commands - DroidWin
to flash the latest stable build on OnePlus support, i.e. this-
https://otafsg1.h2os.com/patch/amaz....P.35_OTA_0350_all_2103221240_3e944b9d067.zip(OnePlus7Oxygen_14.P.32_OTA_032_all_2101280019_b2a62765ba0c485e.zip)
??
Or do you suggest to use the Android 11 firmware available on XDA?
saurabh_op7 said:
As a rain check, as I am new to this, and don't want to screw up more,
You mean I can use this method-
Restore OnePlus 7/7T/7T Pro to Stock via Fastboot Commands - DroidWin
to flash the latest stable build on OnePlus support, i.e. this-
https://otafsg1.h2os.com/patch/amaz....P.35_OTA_0350_all_2103221240_3e944b9d067.zip(OnePlus7Oxygen_14.P.32_OTA_032_all_2101280019_b2a62765ba0c485e.zip)
??
Or do you suggest to use the Android 11 firmware available on XDA?
Click to expand...
Click to collapse
You can do it with the fastboot zip but you need to download all the firmware, in some threads you will find the stock/rooted boot.img from stable and OB, I shared both in this message
RokCruz said:
If you ended with a blinking TWRP just flash the stock/rooted boot.img if you are using stable you can obtain it here(Post in thread 'Android 11 Release - Finally!' https://forum.xda-developers.com/t/android-11-release-finally.4251267/post-84717089)
Or if you are on a Open Beta here: Thread 'OxygenOS Android 11 Betas (OnePlus 7 Pro) released (Open Beta 4 now available)' https://forum.xda-developers.com/t/...o-released-open-beta-4-now-available.4221067/
Click to expand...
Click to collapse
RokCruz said:
You can do it with the fastboot zip but you need to download all the firmware, in some threads you will find the stock/rooted boot.img from stable and OB, I shared both in this message
Click to expand...
Click to collapse
I am pretty sure I know my OS, but is there a way to find out?
I was running the stable, but flashing stock boot just led me to a boot loop with the Original Recovery, it's giving me options to
1. Wipe data and cache
2. Reboot to fastboot
3. Reboot to recovery
The fastboot flash commands above to flash stock OS didn't work, due to one error or another.
Anyhow, I had read somewhere fastboot continue works(here: it wasn't working before for me), so I tried that again, and now I am just stuck on 1+ Fastboot screen. I will wait it out to see if it boots into system.
Otherwise, I am thinking I reload fastboot and flash stock boot just like I did- and from there wipe data, but what do I expect then??
The way I see it, I am just stuck in some serious boot issue, and might eventually have to go down the path of msndownloadtool, any suggestion?
saurabh_op7 said:
I am pretty sure I know my OS, but is there a way to find out?
I was running the stable, but flashing stock boot just led me to a boot loop with the Original Recovery, it's giving me options to
1. Wipe data and cache
2. Reboot to fastboot
3. Reboot to recovery
The fastboot flash commands above to flash stock OS didn't work, due to one error or another.
Anyhow, I had read somewhere fastboot continue works(here: it wasn't working before for me), so I tried that again, and now I am just stuck on 1+ Fastboot screen. I will wait it out to see if it boots into system.
Otherwise, I am thinking I reload fastboot and flash stock boot just like I did- and from there wipe data, but what do I expect then??
The way I see it, I am just stuck in some serious boot issue, and might eventually have to go down the path of msndownloadtool, any suggestion?
Click to expand...
Click to collapse
Flashing the stock boot.img should be enough to boot into system without problems because TWRP can't decrypt data in android 11.
In this point you can try a factory reset from stock recovery this will keep device files but will erase all your config and apps
To figure out what version of firmware you had you can run this command in fastboot
Fastboot getvar all
RokCruz said:
Flashing the stock boot.img should be enough to boot into system without problems because TWRP can't decrypt data in android 11.
In this point you can try a factory reset from stock recovery this will keep device files but will erase all your config and apps
To figure out what version of firmware you had you can run this command in fastboot
Fastboot getvar all
Click to expand...
Click to collapse
Flashing didn't work to boot into system, I was just getting stuck in the Recovery boot loop, it finally booted into system once I wiped my data(files, music, etc -option);
I did try factory reset, only once I cleared the partition, did the boot loop give way to boot into system;
It booted back to Android 11, but it's all glitchy: Boot taking too long, WiFi not switching on, Call not working, Data is working though- basically it's very screwed up, got a couple of errors too- it's like watching an amnesiac old person.. if you get the gist.
So, now I am considering a stable build from Oneplus support website as a local upgrade and booting back to that..
I am hard pressed for options, let me know if you think something else works better, thanks!
saurabh_op7 said:
Flashing didn't work to boot into system, I was just getting stuck in the Recovery boot loop, it finally booted into system once I wiped my data(files, music, etc -option);
I did try factory reset, only once I cleared the partition, did the boot loop give way to boot into system;
It booted back to Android 11, but it's all glitchy: Boot taking too long, WiFi not switching on, Call not working, Data is working though- basically it's very screwed up, got a couple of errors too- it's like watching an amnesiac old person.. if you get the gist.
So, now I am considering a stable build from Oneplus support website as a local upgrade and booting back to that..
I am hard pressed for options, let me know if you think something else works better, thanks!
Click to expand...
Click to collapse
I guess msmtool it's the best way to restore your phone, remember that msmtool will re-lock your bootloader so if you want root you need to unlock your bootloader again.
Use msmtool and instructions form Here(there's an android 9 and android 10 for Global and Europe versions, use android 10)
RokCruz said:
I guess msmtool it's the best way to restore your phone, remember that msmtool will re-lock your bootloader so if you want root you need to unlock your bootloader again.
Use msmtool and instructions form Here(there's an android 9 and android 10 for Global and Europe versions, use android 10)
Click to expand...
Click to collapse
My model is GM1901, in support intro for the link you provided, that's not included?
saurabh_op7 said:
My model is GM1901, in support intro for the link you provided, that's not included?
Click to expand...
Click to collapse
Wait GM1901 is a OnePlus 7(non pro) right?
RokCruz said:
Wait GM1901 is a OnePlus 7(non pro) right?
Click to expand...
Click to collapse
Yeah.. ?
saurabh_op7 said:
Yeah.. ?
Click to expand...
Click to collapse
This is the OnePlus 7 pro forum so, I assume you was a 7 pro user, now all makes sense you don't flash the correct boot.img for your device so all woes wrong.
You need to use msmtool from Here
RokCruz said:
This is the OnePlus 7 pro forum so, I assume you was a 7 pro user, now all makes sense you don't flash the correct boot.img for your device so all woes wrong.
You need to use msmtool from HereI
Click to expand...
Click to collapse
Yeah man, I realised.. anyway, I flashed the boot image from Xda for OP7.. nevertheless, mom tool it is.. thanks..!
RokCruz said:
This is the OnePlus 7 pro forum so, I assume you was a 7 pro user, now all makes sense you don't flash the correct boot.img for your device so all woes wrong.
You need to use msmtool from Here
Click to expand...
Click to collapse
Hey, I am on Mac, I see that Msm is windows-specific.. any way out?
Update: I have been roaming around the corridors of this forum since about a week now. Thanks @RokCruz !!
Finally, used msm tool, although I suspect I still had the option of flashing TWRP and Magisk as I had access to phone and fastboot, but the system was super glitchy.
saurabh_op7 said:
Hey, I am on Mac, I see that Msm is windows-specific.. any way out?
Click to expand...
Click to collapse
I guess that the only way is using the fastboot ROM
RokCruz said:
I guess that the only way is using the fastboot ROM
Click to expand...
Click to collapse
Any idea if we're gonna get one soon?
Hi All,
I Need Some help.. Iam Stuckup in Android 11 EEA Stock Rom. I tried to use Mi Flash tool to downgrade to Android 10, but the phone only gets in to Bootloop, the Phone keeps restarting with just POCO logo. I can able to flast TWRP and Fastboot, but what ever i tried , the phone keeps restarting after Poco Logo,
If Any one has any Idea, Please Advice the Proper Downgrade Process.
Thank You
Regards
Kumar
Just FORMAT DATA...
Tried. Still no luck . Mobile getting restarted continue if I install any stock rom or any custom rom. But it only boots properly if I install the stock android 11 zip file through twrp/ofox.
Is there any proper guide lines to roll back to Android from 10 stock rom?
Or is it that Xiaomi has anti roll back enabled in android 11 stock rom?
Kumar
same issue dude , with no luck i send it service center
Flashed wrong version , phone keep restarting
Good day , kindly I need your Help I have poco x3 nfc Global version with miui 12.08 and After unlocked phone , flashed miui 12.09 Miui india version and now phone show poco logo then keep restarting I tried All Available soluation flash stock...
forum.xda-developers.com
Navin.T said:
Tried. Still no luck . Mobile getting restarted continue if I install any stock rom or any custom rom. But it only boots properly if I install the stock android 11 zip file through twrp/ofox.
Is there any proper guide lines to roll back to Android from 10 stock rom?
Or is it that Xiaomi has anti roll back enabled in android 11 stock rom?
Kumar
Click to expand...
Click to collapse
No it doesn't have anti roll back. I've done it. Went from 12.0.8 global (A10) to 12.0.6 europe beta (A11) to 12.0.8 global again. From A10 to A11 it works like an update so you can just flash and everything works but when you go back to A10 you have to do FORMAT DATA (no wipe data is not the same thing) or you're stuck in a boot loop. That's all there's to it.
MocnePifko said:
No it doesn't have anti roll back. I've done it. Went from 12.0.8 global (A10) to 12.0.6 europe beta (A11) to 12.0.8 global again. From A10 to A11 it works like an update so you can just flash and everything works but when you go back to A10 you have to do FORMAT DATA (no wipe data is not the same thing) or you're stuck in a boot loop. That's all there's to it.
Click to expand...
Click to collapse
How do you do Format Data when you are in A11? is that means i should be on TWRP or Orange? I tried to Install Stock 12.0.8 through MI Flash. But still it is in Boot Loop only.
So can you tell me what iam missing here?
Thanks in Advance
Navin
mahmoud20070 said:
same issue dude , with no luck i send it service center
Flashed wrong version , phone keep restarting
Good day , kindly I need your Help I have poco x3 nfc Global version with miui 12.08 and After unlocked phone , flashed miui 12.09 Miui india version and now phone show poco logo then keep restarting I tried All Available soluation flash stock...
forum.xda-developers.com
Click to expand...
Click to collapse
What did the service center did? did they rolled back to Android 10 and gave the mobile back?
Navin.T said:
How do you do Format Data when you are in A11? is that means i should be on TWRP or Orange? I tried to Install Stock 12.0.8 through MI Flash. But still it is in Boot Loop only.
So can you tell me what iam missing here?
Thanks in Advance
Navin
Click to expand...
Click to collapse
FORMAT DATA from recovery. It doesn't matter which one or what system you're on. It should be a routine for you every time you switch ROM. In custom and stock recoveries there's an option to do it. It's not your usual wipe data. It's a separate option (though it can be found in the same section of recovery) specifically named FORMAT DATA. Do it as the last thing after flashing a new ROM. It'll ask you if you really want to do it and you need to confirm by typing YES before you can proceed.
It is not very encouraging to have to format data everytime when we have 25+ custom A11 ROMs but can't even perform a straightforward and reliable nandroid backup. Just needed saying.
MocnePifko said:
FORMAT DATA from recovery. It doesn't matter which one or what system you're on. It should be a routine for you every time you switch ROM. In custom and stock recoveries there's an option to do it. It's not your usual wipe data. It's a separate option (though it can be found in the same section of recovery) specifically named FORMAT DATA. Do it as the last thing after flashing a new ROM. It'll ask you if you really want to do it and you need to confirm by typing YES before you can proceed.
Click to expand...
Click to collapse
In Stock recovery where can we find "Format Data"?? its only "wipe all data"....What am i missing here?
Navin.T said:
In Stock recovery where can we find "Format Data"?? its only "wipe all data"....What am i missing here?
Click to expand...
Click to collapse
In stock recovery you only have that option and that's totally fine. Use it to perform a factory data reset.
You can try to do this a different way.
Start with this. Get it installed and running on your PC. You have to have USB debugging ON in developer settings of your device. Reboot your device to Fastboot (turn OFF>hold power+Volume down). Connect the phone to your PC and make sure it works (gets detected) with the program. Don't try to use this tool to fix your device as it most likely won't work. Choose "My device works normally I want to mod it." option. If it is being detected reboot it to recovery and close the tool on your PC. Download and unpack the attached file. Run "cmd-here.exe" (note that it will not work properly if you have ADB already installed on your PC).
In the CMD window type in: xiaomiadb format-data and hit Enter.
Follow the procedure an den reboot your device.
Good luck
https://www.droidwin.com/downgrade-xiaomi-poco-x3-android-11-to-android-10/ ------Guys i found out the solution. I have followed exactly the way it was mentioned in the link above. And i have successfully downgraded to Android 10. Now i can go back to custom ROMs....
Thanks a Lot guys for all of your unconditional support
Navin
Navin.T said:
What did the service center did? did they rolled back to Android 10 and gave the mobile back?
Click to expand...
Click to collapse
no they replaced motherboard , as technician inform me that motherboard effected by just flash rom related to same phone I don't how that
don't try this at home
Hello, I have a Redmi 9A in the default stock state (no unlocked bootloader and default recovery, no TWRP).
After a random shutdown while using it normally, it's stuck in a bootloop in the default recovery.
I've read other threads, and I think I can try to recover it by using SP Flash Tool (please confirm if this is correct), but I'm more concerned about the data inside the device.
Can I somehow recover the data before flashing it, or is it impossible to do that since my bootloader is locked?
Thanks.
Well I don't think you can recover data I guess, maybe if you only select download not format + download in sp flash tool but maybe you brick again your phone.
it boots to recovery, so use adb or mount internal storage. you can also dirtyflash ROM
yaro666 said:
it boots to recovery, so use adb or mount internal storage. you can also dirtyflash ROM
Click to expand...
Click to collapse
Sorry for the delay, been doing some reading on these things.
By using adb, do you mean using adb pull to get the files? In the recovery, Connect to MI Assistant only gets the device in sideload, so I don't think that's possible. Don't have the option to mount storage either.
You have sideload?? If yes open adb in pc and type : adb sideload file.zip ( your rom ** btw you need recovery rom not fastboot**) idk if you will delete data or no
I tried that, but without success apparently. The rom is loading for some time, and then reports the error:
terminate called after throwing an instance of 'std::bad_alloc'
what(): std::bad_alloc
From what I've read, it might be due to a bad driver installation, I will look at it and update
madafaka7 said:
I tried that, but without success apparently. The rom is loading for some time, and then reports the error:
terminate called after throwing an instance of 'std::bad_alloc'
what(): std::bad_alloc
From what I've read, it might be due to a bad driver installation, I will look at it and update
Click to expand...
Click to collapse
Ok
Reinstalled drivers, still returns the same error.
try older ROMs - either you have faulty hardware or some minor bug
yaro666 said:
try older ROMs - either you have faulty hardware or some minor bug
Click to expand...
Click to collapse
I've tried to sideload the latest recovery ROMs for 12.0 and 12.5, the device was 12.5 when it "crashed". Should I try MIUI 11, or is it enough with older 12 versions?
madafaka7 said:
I've tried to sideload the latest recovery ROMs for 12.0 and 12.5, the device was 12.5 when it "crashed". Should I try MIUI 11, or is it enough with older 12 versions?
Click to expand...
Click to collapse
Try 12.0.20, the 12.5 have a lot of bugs and yeah
Rares6567 said:
Try 12.0.20, the 12.5 have a lot of bugs and yeah
Click to expand...
Click to collapse
That's the one I've tried already, it's the latest 12.0 version.
I guess I'll try to use SP Flash Tool, but it looks like the hardware is messed up...
Ok, a bit late but I'm going to update just in case anyone faces the same problem.
After trying every option with no success, I gave up on recovering user data and wiped all data from the stock recovery menu, and that solved the bootloop somehow. I'm guessing an app was messing up the system, but I don't know.
Thanks @Rares6567 and @yaro666 for your help.
madafaka7 said:
Ok, a bit late but I'm going to update just in case anyone faces the same problem.
After trying every option with no success, I gave up on recovering user data and wiped all data from the stock recovery menu, and that solved the bootloop somehow. I'm guessing an app was messing up the system, but I don't know.
Thanks @Rares6567 and @yaro666 for your help.
Click to expand...
Click to collapse
Happy to hear that