Fully stock OnePlus 8 - global unlocked version. Current Oxygen OS build is stable OTA 10.5.9.IN21AA.
My phone will not connect to my aftermarket JVC car stereo. I had no problems with my previous phones including my OnePlus 6T. Up until today I had been having a lot of frustration when getting into the car, turning it on, and the phone said it was connected to the radio, but the radio showed it was not. I would have to go into the bluetooth settings on the OP8 every time and de pair then re pair them for it to work. Sounds like first world problems, but having to do it every time the car is started when it should just automatically connect to a remembered device was quite frustrating. Today the problem actually got worse. I went to connect my phone, as per the usual I had to de pair and re pair the radio and it showed as paired. So I loaded up Amazon Music and started playing, but the audio didn't come from the speakers, it came from the phone only. I went into the bluetooth settings for the JVC radio and tried untoggling and toggling "media audio". No dice. Tried rebooting the phone, still no dice. Turned the radio off after saying some choice words and drove in silence.
Then tonight I was outside cooking on the grill and tried to connect the phone to my JBL Charge 3 speaker. It did the same thing. It connected but music didn't play from the speaker, it played from the dang phone.
I have never had a phone do anything like this, and frankly am about to return the dang thing as much as I like the phone's performance I have too many devices that are bluetooth that I use daily to have a phone that is unreliable with those devices.
Has anyone else had a similar problem or have any ideas on something I can try?
Wanted to post an update. I emailed OnePlus and they offered a suggestion that seems to have solved the problem.
1. Network reset:
Open the 'Settings' app on your device > Navigate to 'Backup & reset' > 'Network reset' > 'Reset' Note: This will erase all passwords of connected Wi-Fi networks.
After performing the Network Reset my devices pair as expected.
I am a new owner of the OnePlus 8T 5G and I am very dissatisfied. I plan to contact Sprint/T Mobile today to see if there is something I can do to get a refund or exchange. Today's problem is that I cannot connect to my bluetooth speaker. It took me several tries to connect it to my Subaru and now it will not pick up this speaker. Why is this so complicated? I am also very unhappy with the amount of ads that appear on my phone, even on the lock screen. If this is what 5G means, count me out!!!!
Related
I have the Kenwood DNX8120 and it works fine with my Fuze (did have disconnect issues but just updated the Kenwood firmware which should take care of that) but the SMS feature on the radio doesn't work. I know only certain phones are compatible with this feature but on the Kenwood compatibility list there are several HTC devices that work. In any case, does anyone know how to enable SMS over bluetooth on the Fuze?
Thanks
I have the Kenwood DNX8120 in my car and have had no luck getting the Fuze to work correctly. It constantly drops connection. I updated the Bluetooth firmware and that only seemed to make matters worse. It will pair with the Kenwood, but either won't make a phone call or will take up to 60 seconds (or not at all) for the Fuze to recognize I it the call button on the radio. SMS, sent and received call history also do not work.
Have you had similar issues?
I can not get sms working. The only other issue I have is that after a call, it drops the connection. If I get another incoming call, it will reconnect and the radio will ring and handle the call. But, if I want to place a call, I have to either select "set as hands free" of something similar, in the bluetooth settings on teh phone and it reconnects and I can dial. I just upgraded to elite rc3 and the problem is still there. I havn't messed with it enough yet to know if it dials ok without having to bring the phone out of standby yet. I too have updated the bluetooth drivers from Kenwood and that didn't help. I also tried the jetware handfree extension and didn't see any improvement.
I called HTC about this, and they told me it only "officially" supports a hand full of car units. Mostly in the Audi and BMW. They don't "officially" support anything from Kenwood so they were absolutely no help on this. I've also noticed this phone drops all connections except cell and data when it sleeps. Wifi, GPS and Bluetooh all seem to go to sleep with the phone. This seems to make bluetooth pretty useless if the connection drops every time the phone sleeps and needs to be manually reconnected.
I haven't seen it drop the bluetooth connection during sleep. I see that the Kenwood supports some HTC devices but not this one specifically. The other wierd thing is that the first time it pairs it shows the battery indicator but after the next connect it doesn't show it. It shows the battery icon but shows it empty. The jetware extension however does fix that. I will play some more with it and report here.
After resetting my phone to AT&T's original setup, I am experiencing the exact same functionality as you. It now sync's my call history and phone book. No voice dial support or SMS yet. (These have never worked with any of my phones) It will disconnect after a couple phone calls and I have to set as hands free to reconnect. Also, mine still looses the connection to the unit when it goes to sleep. I'm keeping it on a car charger for now and turning off any sleep function when charging. That at least keeps it connected until I make a call. It's almost still not worth using with having to reconnect hands free. Maybe if a hands free quick connect shortcut could be created?
This is all really ridiculous that a phone with this kind of tech can't auto pair and be ready for a call. My LG Chocolate had absolutely no problems with the Kenwood. As soon as the Kenwood finished booting the LG would auto connect and be ready for a call.
I thought I found a workaround at
http://forum.xda-developers.com/sho...ghlight=bluetooth+connection+drops+phone+call
But, once installed an trying to run BT Restart I get an error saying that I need .net compact framework (version 1 or 2) installed. Not sure what to do now, cant seem to find a cab for this.
I've used this package from another post on the forum. It has many useful apps including the latest version of .net compact framework.
http://www.tyguy.net/_xchg/PPC/@essentials.rar
Let me know how it turns out!
I will take a look but I have 3.5 already installed. I guess that app needs the older version. Not sure I want to mess with downgrading it.
Not Kenwood
Hey Guys,
I drive a Jag XK8 and it has the same issues you are mentioning with your Kenwood, but its an Alpine unit, it drops calls, and after the first call connects the second call rings on the stereo but you can only answer on the handset.
I also recently had a new Jag XF for a week. It had a full integration to the phone. It also only showed the battery status when the phone first connected then the battery showed empty. It would drop bluetooth connections constantly on some days (every 90secs) and then somedays it would keep the bluetooth connected without issue. Very unreliable.
The reason I bring this up, is just to let you know these issues are not limited to the Kenwood.
Dave
Just an FYI. I have found it easier to just go into setup in the Kenwood and reconnect the bluetooth from there when the phone disconnects. It's under Setup/Bluetooth/Set, then just click on the device and hit connect. It seems easier than fiddling with the phone while your driving.
I have the AT&T Galaxy S II Skyrocket and my phone used to auto-connect to my car via bluetooth without any problem, even after upgrading to ICS in early July. All of sudden since yesterday a problem has popped up: whenever I start the car, the car's control panel shows "bluetooth connection successful" or something similar, and then the car audio system switches into the talk mode as if the phone is in the mid of a phone call. Of course I am not in the middle of any phone call. So there is no audio heard (no radio, no cd playing, etc). I try to press the button on the car's panel to disconnect the call but it always returns to that talk mode. After some tests I find out that if I make any phone call, the call will be disconnected immediately and the status of my car's panel returns to normal. But next time when I start the car, the issue appears again until I make any phone call.
At the beginning I thought something was wrong with my car. Then I tried two other phones: one was iphone 3G, and the other was an old htc magic with android 2.2. Both of their bluetooth systems worked well with my car. So I believe it is something wrong with the Galaxy phone. However I am not sure what could be the problem exactly.
My phone is not rooted.
Any help is highly appreciated!
Have you tried unpairing the skyrocket and your car? Sometimes you just need to break the connection and set it up again.
Reported questions go in q&a and there are threads on Bluetooth issues
Sent from my SGH-I727 using Tapatalk 2
Firedcylinder said:
Have you tried unpairing the skyrocket and your car? Sometimes you just need to break the connection and set it up again.
Click to expand...
Click to collapse
Yes I have unpaired the connection, restarted the phone and the car, and paired them again. But the problem persists.
Today I tried my wife's iphone 4 with the car the didn't see any problem. I am pretty sure there is something fishy with the phone.
lik88888 said:
I have the AT&T Galaxy S II Skyrocket and my phone used to auto-connect to my car via bluetooth without any problem, even after upgrading to ICS in early July. All of sudden since yesterday a problem has popped up: whenever I start the car, the car's control panel shows "bluetooth connection successful" or something similar, and then the car audio system switches into the talk mode as if the phone is in the mid of a phone call. Of course I am not in the middle of any phone call. So there is no audio heard (no radio, no cd playing, etc). I try to press the button on the car's panel to disconnect the call but it always returns to that talk mode. After some tests I find out that if I make any phone call, the call will be disconnected immediately and the status of my car's panel returns to normal. But next time when I start the car, the issue appears again until I make any phone call.
At the beginning I thought something was wrong with my car. Then I tried two other phones: one was iphone 3G, and the other was an old htc magic with android 2.2. Both of their bluetooth systems worked well with my car. So I believe it is something wrong with the Galaxy phone. However I am not sure what could be the problem exactly.
My phone is not rooted.
Any help is highly appreciated!
Click to expand...
Click to collapse
Common problem:
http://forum.xda-developers.com/showthread.php?t=1630021
Also look in the last couple of pages here, there is some explanation for it.:
http://forum.xda-developers.com/showthread.php?t=1701189
I'm having an issue with my bluetooth holding a connection with my 2013 Honda Civic LX. When listening to music through any music playing app, the connection always stays steady. When there is no music running from the phone, I'll frequently get a message from the display on the dash that the phone has been disconnected. The phone will usually reconnect in a second or two, with another display indicating that it has been connected. This will happen at least two times during my commute to work (25 minutes), oftentimes as many as five times. When I am actively in a phone call, the disconnects seem to be more frequent. It has a timer on the display that shows how long the phone call has been active through the car, and it rarely gets above 3 minutes before the call gets routed back to the phone's speakers while the bluetooth reconnects. The strange thing is that my wife's LG G4, also AT&T, has absolutely no connection issues at any time. I switched phones with her for a week just to confirm since I'm the one generally driving this car, and I didn't have the car drop the connection to the phone even once. Before that week, her phone would have occasionally been used when we were both in the car and she wanted to listen to music through her phone, so it had been connected to the car for more than a week.
I factory reset the phone just to see if there was a strange software issue causing the problem. After the factory reset, the phone and car had a steady connection with no drops for about a week. When the problem came back and was obviously just as bad as before, I tried another factory reset. Once again, the connection stayed steady for about a week before I would get disconnects again. At this point, I contacted AT&T, who replaced my phone thinking that it could be a hardware issue. A week after getting my replacement, the issue popped up once again.
Besides factory resetting, which is the only thing I've found to fix it at least temporarily, I have tried a few different troubleshooting steps. I have cleared cache using the storage screen in the settings menu. I've deleted the phone from the car's connection list. I've re-paired the phone to the car without giving permission for contacts or messages. Also tried to just do a simple reboot of the phone, as well as turning bluetooth off and back on. None of these have any effect on the connection issues once they start coming up.
I can take the car to Honda, but judging on the fact that my wife's phone works just fine in the car, I'm convinced that it is somehow an issue with the software on my phone. My phone is not rooted, and is currently running Android 5.1, S/W H81010o, Build LMY47D.
My guess is hardware problem. My G4 seems to do the same thing with my Jaybird X2 headphones. I've had Jaybird swap them and I'm having the same exact issue of disconnect as with the previous set. I doubt I'd get two bad sets, so its gotta be something hardware related. Sorry I wasn't any extra help. I'm just searching to see if anyone else is having my issue.
My hunch would be whatever the BT protocol is that's being used to pair the devices. Or possibly just an isolated hardware incompatibility. I'm on my second G4 (totally separate reason from BT), and neither has had issues with pairing or staying paired. Even if I were to pause or altogether stop playback of audio, the connection remains stable for me. I pair mine with a Sony BT speaker, a Kinovo receiver for streaming to my car stereo, and even a receiver attached to my Yamaha A/V receiver at home. No issues whatsoever.
For what it's worth: I use PowerAmp Pro when I stream, almost exclusively.
upyouratrix said:
My guess is hardware problem. My G4 seems to do the same thing with my Jaybird X2 headphones. I've had Jaybird swap them and I'm having the same exact issue of disconnect as with the previous set. I doubt I'd get two bad sets, so its gotta be something hardware related. Sorry I wasn't any extra help. I'm just searching to see if anyone else is having my issue.
Click to expand...
Click to collapse
The strange thing for me is that my wife's LG G4 (now 6 months old) works fine in my car under the same circumstances, but I've had 2 LG G4's of my own that essentially showed the exact same symptoms almost immediately. I'm leaning far more towards it being software, with whatever glitch not being present immediately after I factory reset but shows up within a week on my Google profile. My guess is that it's related to the phone related data transferred to the car since it stays connected just fine during media playback but disconnects soon after the media stops, but I can only block contacts to test that theory.
Hi, I've been having some fairly big issues with my in-car Bluetooth and phones. I have a 2013 Subaru WRX with the stock stereo which is made by Clarion.
I first started experiencing problems with it about 2 years ago: I would be driving along when all of a sudden my phone would randomly disconnect from my car while I'm talking, listening to music or just had the GPS running (or a combination of these). Oftentimes my car stereo will spaz out once it disconnects and will actually freeze (all buttons are non functioning, including steering wheel controls, power button, am/fm buttons, volume, etc) and take many minutes to reset the connection or it won't do anything at all (the stereo says, "please wait" or "paused" or will get hung on the song title that was playing when the phone disconnected) and my phone won't reconnect to it - I'll have to restart my car. Sometimes the stereo will reset and simply won't reconnect to my phone.
The kicker is that it's an intermittent problem, but still happens semi-frequently for periods at a time then it seems to get better. I've tried deleting my paired phone list in the car and on the phone, I've tried formatting my phone and nothing worked. I even brought my car into Subaru to diagnose the problem because I feel it's a car issue and they claimed it worked with their own phone which I feel is BS because they didn't want to fix it while the car was still on warranty, but that's another story! They said they couldn't fix it because they saw no problem (couldn't reproduce it) even though I provided them with video and pictures of it occurring.
This first started happening with my unlocked, stock, HTC One, m7 (currently running lollipop) . I thought there was a chance it could be related to an app or the OS but was not able to diagnose or isolate the issue. I just recently bought a Nexus 5x (marshmallow), unlocked, stock, thinking if it was the phone then this would fix the problem. It actually seems to have gotten worse with the frequency, however I've noticed that the phone is better at pairing with my car after the connection is lost. I still can't reproduce this on a consistent basis.
Can anyone suggest some possible causes and fixes? I'm hoping someone here is a Bluetooth Guru!
Hi all,
I have a 2008 vehicle in which Bluetooth seems to be a problem depending on which ROM I have installed on the device.
I'm currently on Android 9 OB 7 and Bluetooth connects and stays connected through incoming and outgoing calls. Works flawlessly.
However, with for example Lineage (among others), the Bluetooth pairs, but connection drops soon after or drops after the first call with the car stereo showing "Net Search", meaning the car BT lost service but the phone Bluetooth is still connected. I've tried restarting and resetting network settings but no luck at all. Changing dev options doesn't work either.
I'm thinking it could be a Bluetooth stack difference?
Is there a way to replace the lineage Bluetooth with OOS?
There is no bluetooth.default.so file that I could find
Any help or direction is appreciated.
nickelnine said:
Hi all,
I have a 2008 vehicle in which Bluetooth seems to be a problem depending on which ROM I have installed on the device.
I'm currently on Android 9 OB 7 and Bluetooth connects and stays connected through incoming and outgoing calls. Works flawlessly.
However, with for example Lineage (among others), the Bluetooth pairs, but connection drops soon after or drops after the first call with the car stereo showing "Net Search", meaning the car BT lost service but the phone Bluetooth is still connected. I've tried restarting and resetting network settings but no luck at all. Changing dev options doesn't work either.
I'm thinking it could be a Bluetooth stack difference?
Is there a way to replace the lineage Bluetooth with OOS?
There is no bluetooth.default.so file that I could find
Any help or direction is appreciated.
Click to expand...
Click to collapse
I am having the same issue with 9.0.2 OOS. So not sure if this us a compatibility issue with more than 1-2 years old vehicles or something else? Glad to hear that OB7 is working fine for you. Hope fix is coming soon. It's simply annoying.
I am having car connection issues as well. I have a 2010 Ford Edge. Just moved from Sony Xperia XA1 Ultra on Orea to my first OP device - OP6 Pie 9.0.2 - I can connect to my car initially but once I turn off my car, I have to go through a series of reconnect steps. I called tech support and we spent about 45 min troubleshooting - of course I was told I was the only one who had complained of this issue - anyway no resolution. The only way I can "reconnect" is to go into my car's system settings and select "connect to BT device" then toggle bluetooth off and on in the phone - sometimes this works with the first go, other times I have to repeat this cycle 5 or 6 times. Simply selecting "previously paired devices" in the phone app doesn't work either.
Really a pain in the tush, because I am usually in a hurry and don't have time to go through all this scenario to get a connection.
On the other hand, I have a bluetooth ear piece (made by Samsung that is like 5 or 6 years old) that reconnects every time I turn it on, no problems.
Car connections too but was not present in omni
I found for stock, performing a network reset (mobile, wifi Bluetooth) then restarting the device fixed the Bluetooth connection issue.
For custom non-stock ROMs, for my issue at least, I found its not a Bluetooth issue at all but rather the mobile network drops and the car Bluetooth cannot reconnect. The same network reset as above does not work but what does work is toggle off the "automatically select network" and manually select the mobile network from the menu that pops up. This keeps the mobile network intact (until the next device reboot, at which point repeat the steps) with the car and all is good.
I only figured it out by accident; hope this helps others.