Hello together,
i have an unlocked Honor 8 (Not Pro) FRD-L09C432B418 (Multitool says so).
I wanted to prepare it for the Installation of openkirin LineageOS ROM (Requires EMUI 8.0).
In the Process of trying to update it to EMUI 8 i did so many errors i assume, that now i dont have a system left on the phone and its looping in boot.
Can someone guide me how to install the right firmware with EMUI8.0 on the FRD-L09C432 ?
Related
Hi everybody,
i had my mate (al 10 4/64) since 1 year but i decided (sadly) to upgrade to nougat.
I don't like nougat and i came back.
From that i can only put twrp 3.0.2 for emui 4.0 and install 4.0 rom.
I try to relock bootloader and unlock again but no way.
If i put twrp for emui 4.1 mate don't access to that (fastboot give me ok for flash).
Now i can only boot emui 4.0 rom.
I also try erecovery but i obtain only a "!" red and impossibile to get nothing
Help me please!
Hey guys, how can i check which Honor 8 FDR i have?? I want to roll back to android 6 if i cant succeed rooting android 7 https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-stock-firmware-t3470454 which rom is for my phone and what android version they are?
I can only see that is the model it says nxt-l29 its a Europe model i guess since it has multi-language support.
Every time i boot into the TWRP i can't see anything on the storage so i cannot install SuperSu, i have tried several recoveries like from this guide https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
And this guide https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Hi folks. Sorry if this topic has been covered before. I really tried to find threads with a solution but I wasn't able to get specific answers. Kindly help me out.
This is the current status of my Huawei Mate 9 - MHA-l29
My Huawei Mate 9, MHA- L29 is working okay, aside from a few bugs I noticed after upgrading to Oreo (EMUI 8.0) using TWRP last year (a previous version)
I am running Android 8.0 Oreo. The version reads System 8.0.0.42(00YC) when I check in the "About Phone Section". When I check this version using HiSuite, it tells me that is the official one.
I have unlocked the bootloader FRP...basically everything is unlocked.
I have installed TWRP version 3.2.1-0
I suspect I may have accidentally wiped out the recovery for my device, so if I tried to do a factory reset, it may not work. That is why I wanted to just do a fresh installation of STOCK ROM for Oreo.
Now this is what I need help to do.
I wanted to do a fresh installation of the stock ROM for Oreo (8.0) for my Mate 9 device. I figure stock ROM will be more stable and it will be the official one anyway.
The reason I want to do a fresh install is because I noticed the current version has a few bugs that kept recurring whenever I did a factory reset (issues with themes, calendar, etc).
I wanted to know if I can use TWRP 3.2.1 (currently installed) to do an installation of Oreo stock ROM for my mate 9 using maybe the SD Card. I saw somewhere that I can simply copy the files to the SD card and then use TWRP 3.2.1-0 to do an installation.
If the above is possible, what do I need to do?
If it is not possible to use TWRP 3.2.1, what can I do instead so that I install a new stock ROM without bricking the phone? Please assist.
Thank you in advance for your time and help.
Mat3guy said:
Hi folks. Sorry if this topic has been covered before. I really tried to find threads with a solution but I wasn't able to get specific answers. Kindly help me out.
This is the current status of my Huawei Mate 9 - MHA-l29
My Huawei Mate 9, MHA- L29 is working okay, aside from a few bugs I noticed after upgrading to Oreo (EMUI 8.0) using TWRP last year (a previous version)
I have unlocked the bootloader FRP...basically everything is unlocked.
I suspect I may have accidentally wiped out the recovery for my device, so if I tried to do a factory reset, it may not work. That is why I wanted to just do a fresh installation of STOCK ROM for Oreo.
Now this is what I need help to do.
I wanted to do a fresh installation of the stock ROM for Oreo (8.0) for my Mate 9 device. I figure stock ROM will be more stable and it will be the official one anyway.
The reason I want to do a fresh install is because I noticed the current version has a few bugs that kept recurring whenever I did a factory reset (issues with themes, calendar, etc).
I wanted to know if I can use TWRP 3.2.1 (currently installed) to do an installation of Oreo stock ROM for my mate 9 using maybe the SD Card. I saw somewhere that I can simply copy the files to the SD card and then use TWRP 3.2.1-0 to do an installation.
If the above is possible, what do I need to do?
If it is not possible to use TWRP 3.2.1, what can I do instead so that I install a new stock ROM without bricking the phone? Please assist.
Thank you in advance for your time and help.
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Check out that tool. I've used it myself, works well.
Hello,
I was running PixysOs on my Honor 6x till today but I decided to try to get back to stock rom mainly because with PixysOs Bt is not working properly and because system was not using the SD card so I was always running out of space.
In order to install PixysOs I rebranded the phone from BLN-L21 to BLN-AL20 in order to get stock Emui 8 version and flash PixysOs over.
I did a lot of tries with TWRP and MultiTool following different tutorial and at last I managed to boot into eRecovery which download and installed latest stock image for BLN-AL20C00 so actually the system has booted in a kind of Emui splash screen showing different options I can't understand as they are only in chinese.
Maybe we can start from scratch and someone can address me on how to get back to stock rom or how do install a stable custom rom?
Try dload the same stock firmware and see if you could manage to boot.
i was just writing an update.
I manage to boot the system and I can see that actually I am on Emui 8.0.0, model number is BLN-AL20 mobile network is not working as I am on China/Indian version (I think).
As far as I know I should now have the prerequisites to install a Pie Crom, any suggestion for a custom rom with working BT and SD Card?
Or do you think is better to get back to stock Emui going through rebranding?
As for rebranding I've seen that latest MultiTool no longer supports rebranding functions...
thanks,
Andrea.
Any hope to get an answer?
I would suggest to get back to full stock with everything functional. Once you fix, you can then switch to elemental rom. Haven't tried any custom ROM though on emui 8.
With full stock you mean Emui8 which will be in chinese and with no SIM support as I am on BLN-AL20 or do you mean to rebrand to BLN-L21 and to flash stock rom on it?
Actually I flashed original Emui8 and I have no SIM support.
If I have to rebrand how can I do it as MultiTool no longer supports rebranding?
I know it's an old device but is sad to have it dead on my desktop.
Sephiroth79 said:
Hello,
I was running PixysOs on my Honor 6x till today but I decided to try to get back to stock rom mainly because with PixysOs Bt is not working properly and because system was not using the SD card so I was always running out of space.
In order to install PixysOs I rebranded the phone from BLN-L21 to BLN-AL20 in order to get stock Emui 8 version and flash PixysOs over.
I did a lot of tries with TWRP and MultiTool following different tutorial and at last I managed to boot into eRecovery which download and installed latest stock image for BLN-AL20C00 so actually the system has booted in a kind of Emui splash screen showing different options I can't understand as they are only in chinese.
Maybe we can start from scratch and someone can address me on how to get back to stock rom or how do install a stable custom rom?
Click to expand...
Click to collapse
In the next weeks, I will release PE Android 19 based monthly
Hello, i have a Honor 8 where i had installed TWRP 3.1.1-1 and Resurrection Remix N v5.8.4 . With that rom i was not able to use Usb so i installed on it AOSPA 7.1.2.
Doing that i lost the root (prolly i did something wrong) and i was not able to get it back so i tried to rollback to FRD-L09c432b131 installing first Honor 8_Rollback Package_FRD-L19_from Android 7.0 EMUI 5.0 to Android 6.0 EMUI 4.1_C900B300_Italian and after it installing Honor 8_Firmware_FRD-L09_Android 6.0_EMUI 4.1_C432B131_Western Europe . Now my phone is on FRD-L09C432b131 and it is working without problem but i can't find a way to update the firmware with original roms (tried multiple time with different packages without luck) or to install again Resurrection Remix N v5.8.4 because i'm not able to boot in TWRP even if the installation process of the recovery doesn't give error.
To be sure i also used the Unbrick function of Multi - tool extracting the required file with Huawei Update Extractor from the Update.app file of Honor 8_Firmware_FRD-L09_Android 6.0_EMUI 4.1_C432B131_Western Europe but still i can't find a way to get back to TWRP recovery or to install any original firmware update.
If anyone have any idea about why i would be happy to get some help