1. Installed adb and fastboot driver using the 15 seconds ADB Installer v1.4.3
2. I unlocked bootloader using dc-unlocker2client.
3. I followed and flashed twrp following this youtube video which was very clear and I followed it throughly.
4. I rebooted it from the powershell and the phone booted into the stock rom without going to twrp.
5. So I restarted it by pressing the power buttona and volume up button and released when i saw the bluescreen the device booted into emui recovery so i cancelled it and shutdown the device.
6. I tried entering into twrp by using fastboot through powershell the phone was detected when I typed the comand fastboot devices, so I tried to get into recovery using the fastboot reboot recovery.
7. The phone said
" your device has been unlocked and can't be trusted.
To learn more visit:
Your device is booting now..."
8.Now all i can do is reboot by pressing and holding power button and getting it into quickboot by pressing power button and volume button.
Kindly help me fix this.
Related
Hey XDA, I'm a 17 year old kid with a huge problem!
I have an LG Optimus one p500 that's stuck in fastboot mode.
After rooting I downloaded ROM manager and went to Backup my rom I have installed. After selecting that the phone rebooted but was stuck in Fastboot mode. It's been stuck for 2 days and I can't figure out how to exit fastboot or just reboot regularly.
Methods tried:
-Battery pull then turn on
-Press and Hold Homekey, Powerkey and Volume down when booting
-Run fastboot on my command prompt and reboot, continue or flash command
<But they all end in fsatboot mode "Fastboot: Processing Commands" still>
I've tried everything and read everyforum, My questions
1)How can I just reboot my phone regularily! so it's not in fastboot mode?
2) Is there a command prompt for fastboot that willl exit fastboot?
I just want my phone to work normally! Please help, much appreciated!
I think I posted this answer to late
this things also happens with me yesterday and for gaining back my phone first I press back button and volume up and while holding this button I press power key phone will boot into emergency mode and then I used used kdz
my phone came back again without any data delete
but my phone again unrooedt and I rooted it again using gingerbreak.apk
kdz is not necessary in this case (and is not recommended, ever)
try this:
http://forum.xda-developers.com/showthread.php?t=1088046&highlight=fastboot
Hi I have the following problem: after I flash Cannibal open touch recovery I could not flash any .zip file so I decided that I go back to CWM touch so I restarted my phone. Phone booted into fastboot mode with the following message no boot or recovery IMG so I decided to flash recovery with fastboot. I opened the folder with fastboot command flash_recovery connect the phone to usb but the command line always showed waiting for device. I unplugged the phone and tried to press the volume keys but nothing happened as if it freezes. I pulled the battery and try it again but no response. I cant connect phone to odin because it has broken power button and after I insert the battery it always turn on itself. Please advise me what to do thank you.
Seems your drivers have gone corrupt. Try a different system and use Nexus Root Toolkit.
I tried this option but without success. Phone does not respond to anything. No volume up or volume down. It´s just stucked on bootloader.
This link says that if you get <waiting for device> , then fastboot is not configured properly. Check out the link over here.
You may also try this command "fastboot boot recovery-clockwork-6.0.4.3-crespo.img" to boot into recovery without installing it.
no hope
The reason you cannot navigate in fastboot/bootloader is that your powerswitch is probably stuck in the "on position"...does your device immediately power on when battery is inserted?
The way i solved this a few months ago was to completly remove my powerswitch from the board power my device on..use quickboot to enter fastboot menu and input commands...
Also completely removing your power button makes powering on your nexus alot more complicated.
what i did was go to download mode (holding vol+ and -) and pluging phone in..this takes you to download mode
then you need to get a copy of a boatloader file to flash via odin which will reset your phone and power it on...pm me if interested i can provide you with files necessary
Hello. I can't get my phone rooted in any way.
I want to Root so I can use TWRP app to flash TWRP recovery .img, and after that I can boot into TWRP recovery and flash new ROM. Correct????
What I've tried so far. OppoTools 1.6.5 = One key root gets hard stuck on Oppo logo at start-up and then I have to flash Coloros ROM again from recovery. Also KingRoot says app not installed. On windows version of KingRoot it gets to some percentage and then it Fails.
I have downloaded "unlocked bootloader" Coloros from this forum that was mentioned before ( Dropbox link )
I have also tried two different ColorOs versions.
I have installed 15sec ADB installer.
I plug my phone into PC and run CMD.
I type adb devices into command prompt and it detects my R7 plus.
then I try to command " adb reboot bootloader "
Phone restarts normally and doesnt go to bootloader. Tell me if im stupid, but isn't Bootloader different than Recovery? Because I can get to recovery command "adb reboot recovery"
I tried some weird button combination Vol+ Vol- + Power and phone semibricked for awhile and PC didnt even react USB driver correctly and almost waved the white flag on this case.
I've enabled USB-debuggin and OEM unlock from devices dev-options.
When I to type command "fastboot oem unlock" on command prompt is says Waiting for device. Nothing pops-up on device and nothing happens.
So now Im stuck on situation that my phone doesnt launch into bootloader where presumably "fastboot oem unlock" would work?
If you have flashed the version of Color OS that has bootloader enabled, you should simply need to go into the settings, enable USB debugging and OEM unlocking, then shutdown the phone before holding the power and volume+ buttons and waiting the ADB bootloader screen. After that, just plug it into the computer and follow the guide on flashing twrp with ADB.
The issue: When booting I get the "bad key" boot text which hangs for about 10 seconds before going to splash.
When doing power button + volume up, the bad key hangs for so long that holding down power button just SHUTS THE PHONE OFF.
I can do power button + volume down to enter bootloader, and then enter recovery mode from there, but when I do that I get NO COMMAND
Ive also tried with adb
adb reboot recovery
same thing NO COMMAND
Everything that I google about NO COMMAND comes back with "oh just do power button + volume up duh" and each time I read that as a solution it makes me a little bit more angry.
https://forum.xda-developers.com/moto-e6/how-to/rooting-e6-surfna-t3965659
Ive been following this guide to root my moto e6 and everything has been fine so far, but im stuck trying to install magisk. Magisk manager has already been installed, and I believe I have installed magisk. But I cannot boot into proper recovery to use it.
About to give up, hopefully someone can help
installed a bootlogo following this guide
https://forum.xda-developers.com/moto-e5/how-to/boot-logo-moto-e5-stock-bad-key-removed-t3869259
to see if that would help. No change. Cant boot into recovery mode proper.
alexsherman4 said:
The issue: When booting I get the "bad key" boot text which hangs for about 10 seconds before going to splash.
When doing power button + volume up, the bad key hangs for so long that holding down power button just SHUTS THE PHONE OFF.
I can do power button + volume down to enter bootloader, and then enter recovery mode from there, but when I do that I get NO COMMAND
Ive also tried with adb
adb reboot recovery
same thing NO COMMAND
Everything that I google about NO COMMAND comes back with "oh just do power button + volume up duh" and each time I read that as a solution it makes me a little bit more angry.
https://forum.xda-developers.com/moto-e6/how-to/rooting-e6-surfna-t3965659
Ive been following this guide to root my moto e6 and everything has been fine so far, but im stuck trying to install magisk. Magisk manager has already been installed, and I believe I have installed magisk. But I cannot boot into proper recovery to use it.
About to give up, hopefully someone can help
Click to expand...
Click to collapse
bad key and/or N/A is just the phone saying it has an unlocked bootloader.
NO COMMAND when entering Recovery, yes, google is right. When you see NO COMMAND, press and HOLD the power button and TAP the volume up key. You should see at the top, Android Recovery and a bunch of options below. If you don't see this, your recovery partition was probably modified/corrupt. Flash the original recovery.img from a stock rom. I don't think there's a working E6 TWRP recovery image yet.
If you still haven't figured this out I have a possible fix. I found that upon first installing the magisk_patched.img from the guide you linked, everything booted up fine and magisk and root were working. I however made the mistake of booting normally...somehow this affects the magisk boot function in the recovery and gives the no command screen. I just fastboot flash recovery magisk_patched.img again and booted straight into recovery and that fixed it again. Just make sure once you have root again to use a program that allows you to boot back into recovery again directly.
fcohen said:
bad key and/or N/A is just the phone saying it has an unlocked bootloader.
NO COMMAND when entering Recovery, yes, google is right. When you see NO COMMAND, press and HOLD the power button and TAP the volume up key. You should see at the top, Android Recovery and a bunch of options below. If you don't see this, your recovery partition was probably modified/corrupt. Flash the original recovery.img from a stock rom. I don't think there's a working E6 TWRP recovery image yet.
Click to expand...
Click to collapse
When I get to the Android Recovery which option do I choose?
I tried "Reboot system now" and Magisk was still not installed
chami_bc said:
When I get to the Android Recovery which option do I choose?
I tried "Reboot system now" and Magisk was still not installed
Click to expand...
Click to collapse
You are not going to install magisk in stock recovery
Sent from my ocean using XDA Labs
Code:
TRY THIS AT YOUR OWN RISK! This could brick your phone. It shouldn't but it can. If you brick your phone, or anything stops working on your phone, YOU are responsible.
Reboot combinations:
Fastboot: Shutdown and with USB cable hold power and volume down until it says FASTBOOT MODE at the bottom
Recovery: Shutdown and with USB cable hold power and volume down until the
Code:
Please release key to power off *
dissapears.
Unlocking Bootloader
Code:
Note: This will delete all user data! Backup all your data before doing this!
This part of the guide is part of the tutorial made by @Arin59 at https://forum.xda-developers.com/nokia-3/how-to/method-to-unlock-bootloader-nokia-3-pie-t4012285
First of all convert your serial number (should look like NE1*************) to MD5 Hash and enable OEM Unlock in developer options.
Then reboot to fastboot and type
Code:
fastboot oem key {HASH}
then type
Code:
fastboot flashing unlock
.
To reboot to Android, run fastboot reboot.
Installing TWRP
Code:
This will delete your user data, but it should be already deleted.
You can use any TWRP image made for this device but I had the most success with https://forum.xda-developers.com/nokia-3/development/twrp-teamwin-recovery-nokia-3-t3762512 .
Flash your TWRP Image chosen with
Code:
fastboot flash recovery your-recovery-image.img
and then reboot to recovery.
In TWRP go to Wipe and then Format Data and type yes.
Install Magisk
Install Magisk normally.
< waiting for device >
I put the phone in fastboot mode and ran fastboot with the oem key md5 hash command but it just said "< waiting for device >". I think it might be because I forgot to install the Nokia 3 USB drivers. I'm using a linux computer, do I need to find OS specific drivers?
edit: And now my phone is stuck in fastboot mode and for some reason will not shutdown no matter how long I hold down the power button for.
Totalitor said:
I put the phone in fastboot mode and ran fastboot with the oem key md5 hash command but it just said "< waiting for device >". I think it might be because I forgot to install the Nokia 3 USB drivers. I'm using a linux computer, do I need to find OS specific drivers?
edit: And now my phone is stuck in fastboot mode and for some reason will not shutdown no matter how long I hold down the power button for.
Click to expand...
Click to collapse
If you're using a linux computer, you should try running the command with sudo.
If it doesn't work, try with another cable (or computer if it doesn't work) and try again.
#AC said:
If you're using a linux computer, you should try running the command with sudo.
If it doesn't work, try with another cable (or computer if it doesn't work) and try again.
Click to expand...
Click to collapse
Thanks. I've since got it working. For some reason I had to use the -i argument (the interface argument) along with the code for the device (0x2e04) "fastboot -i 0x2e04 <command>".
However, I've recently bypassed the "NO COMMAND" screen and gained access to TWRP custom recovery but in trying to shut down the phone, it shuts down fine but only boots up in fastboot mode. Even using the fastboot reboot command from adb tools boots it up in fastboot mode. This is a problem as I need to boot it in its normal mode so I can download the magisk.zip file required for installing magisk but I seem to be unable to do so.
Totalitor said:
Thanks. I've since got it working. For some reason I had to use the -i argument (the interface argument) along with the code for the device (0x2e04) "fastboot -i 0x2e04 <command>".
However, I've recently bypassed the "NO COMMAND" screen and gained access to TWRP custom recovery but in trying to shut down the phone, it shuts down fine but only boots up in fastboot mode. Even using the fastboot reboot command from adb tools boots it up in fastboot mode. This is a problem as I need to boot it in its normal mode so I can download the magisk.zip file required for installing magisk but I seem to be unable to do so.
Click to expand...
Click to collapse
Try holding volume up and down at the same time while holding the power button.
#AC said:
Try holding volume up and down at the same time while holding the power button.
Click to expand...
Click to collapse
Thanks, it worked.
Though I tried wiping, but it didn't solve the booting issue. Unsure how to proceed at this point. I feel like I've tried everything. Actually, I just checked my /boot folder and it's empty...is that why it's always booting into fastboot?
I tried using adb to sideload the magisk.zip file but then the phone rebooted into stock recovery??
Any and all guides on this say to download the magisk.apk either into the SD card or internal storage, but I don't have a micro SD card and I can't access the normal mode of the phone to download anything.
What can I do?
I've flashed TWRP successfully but forgot to download the magisk.apk. Now whenever I boot up my phone, it boots into stock recovery mode automatically, even if I tell TWRP to reboot into system it reboots into Stock Android recovery. I can still access TWRP by holding down the up + power buttons on boot though, but I can't access the normal mode of the phone anymore.
I tried using TWRP's sideload feature with ADB tools to sideload Magisk.zip and it said it succeeded but in using TWRP's install feature to find the zip file, it wasn't in /sideload/ or /storage/ as both were empty.
How can I temporarily restore normal functionality so I can simply download the Magisk manager.apk?