Captiva Pad 10 3G Plus (tablet) stuck on boot-loop - General Questions and Answers

Hello xda community,
I tried to install TWRP on a Captiva Pad 10 3G Plus. The installation failed, so I'm now stuck at a boot loop. As soon as the tablet is connected to a power source, it keeps restarting. I can only see the Android logo and after that the tablet turns black and the Android screen is shown again. This keeps going until the battery is empty.
All the phisical buttons seem to have no functions because the power button and the reset button can't turn the tablet off and pressing power together with volume (-) won't start the recovery mode.
Their support isnt very helpful, they only told me that power and volume - would normally start the recovery mode. Nevertheless I tried pressing power and volume (+) and power together with both volume buttons. But this didn't start the recovery mode as well.
I also tried to connect the tablet to my pc, but it disconnects too fast to use ASB.
Has anyone an idea what I can do to fix this?

Related

[Q] After System Restore - TF101 Keeps Booting Over and Over Again

Hello All!
My brother gave me his Asus Transformer TF101 to sell but it was heavily modified so I set about putting it back into factory state.
He had TWRP installed so I booted into that (recovery mode, volume down + power, etc.) and proceeded to do a restore. I selected the restore point and clicked "go." Everything seemed to work but now my TF never gets beyond the boot screen (the screen that says "ASUS, Inspiring Innovation..." and has the spinning circle). Obviously something went wrong with the restore and I can deal with that, however, I have a BIGGER PROBLEM now.
I cannot power down my TF. When I press and hold the power button it shuts down (the screen goes black) but then it starts right back up again. I have tried to hold the power button down for 3 seconds, 5 seconds, 10 seconds, 30 seconds, etc. but it always reboots.
Can someone please let me know how I can stop my TF from rebooting over and over again?
Thank you,
Jan
P.S. The main reason why I am needing to power down is I am trying to boot into APX mode so that I can use Easy Flasher.
try vol - and power more than 15secondes. Until you get 2 icons (1 for reset 1 for boot android)
tackyjan said:
P.S. The main reason why I am needing to power down is I am trying to boot into APX mode so that I can use Easy Flasher.
Click to expand...
Click to collapse
When the tf turns itself off just start holding volume-up, eventually the screen will stay blank and you are in APX mode, I've had this issue a few times, just hold volume up and it will eventually boot into apx.
Also try volup and power to hard reset then it will turn on again automatically, be sure to keep holding volume up, apx will eventually come on.

TF700 just vibrates on boot - does not stop

I have scanned the internet for a solution for this and have come across a few. But to no avail.
My TF700 starts the boot process with the traditional single vibrate and then after a second vibrates endlessly. The screen does not come up at all, everything is black.
To give you a background, I have rooted my device. I was on CM's JB ROM for a while and then I formatted and went to the stock 4.2.1 ROM from ASUS (WW_epad-user-10.6.1.14.10). I used the tablet effectively, but then it ran out of juice. So I recharged it completely and now I am stuck with this problem.
From shut down mode:
I press the power button and there is continuous vibration.
I press power + vol dn and there is continuous vibration.
I press power + vol up and it vibrates once and then nothing.
From continuous vibration mode:
I press power and it restarts the same issue with continuous vibration.
I press power + power dn and it restarts the same issue with continuous vibration
I press power + vol up and the vibration stops, the tablet vibrates once and then nothing (i am using this to stop the vibration before the noise drives me crazy).
One thing I haven't tried is to see if the screen is the issue and I'll connect the tablet with an HDMI and see. However, the vibration is still an issue.
The device is not detected by the computer so I cannot use that to reboot in bootloader. In normal sense, it does not boot into bootloader so I can format the device. It just sits there vibrating and I have no way of getting into it.
Please HELP!
Hi I have the same problem with my tf700. How did you resolve your issue..tks
Sent from my K00C using XDA Premium 4 mobile app
Nobody.....
I have de same problem, why nobody help?

Stuck on Nvidia logo.

Hello all,
I recently picked up a Nvidia shield off of Ebay and everything was working fine until yesterday. I was browsing the Play Store when the device turned off and now when I try to boot it will only go as far as the Nvidia logo. I have tried holding down the power and volume down buttons but it only turns off. Any help would be greatly appreciated.
Try entering recovery mode and wiping data. Do this:
1. Hold vol. down button for 3 seconds the rapidly press the power button while still pressing vol. down
2.You're in the tablet's bootloader. Navigate down using the volume keys and select "recovery mode". Confirm by pressing power.
3. Select wipe data/factory reset using the vol. keys once again and confirm with the power key.
4. Reboot and see if it works.
Ty for help. I tried that but it just turns off.
Boot into bootloader
Start with shield tablet off.
Then hold down volume down for 3 secs.
Then tap power button and release while keeping volume down pressed.
This should get you in boot loader mode.
Took me a while last night to find out timing that works for me. I always held the power button too long and didn't get into boot loader mode.

R7F cant even boot (enough battery, was trying to boot into recovery mode)

Hi I need help urgently. I wanted to boot my phone into recovery mode so i after i switched the phone off, i pressed the power button + volume up. My phone was connected to pc all along. problem is, i removed both my fingers off the power and volume up the moment i saw the "OPPO" boot logo, and realizing that the screen is blank, i removed the power cable connecting my phone to the pc. Now, my r7f refuses to boot.
Weird thing is when i connect my phone to the pc, sometimes the pc recognizes an unknown device thats "malfunctioned". This is called 'bricked'? How do i solve this?
I cant even switch on my phone or remove the battery due to its built-in battery. had 70+% battery at the point of occurence.
My R7f goes into the fastboot mode when i hold the power and volume+ . I usually enter to the recovery mode by holding the power and volume -
You have to hold the buttons for more than 2-3 seconds even the boot logo is shown keep holding them.

benq f52 boot loop

Hi,
I tried to root my phone by using the kingo root application, after 90% it just rebooted and now hangs in a boot loop.
I try to enter the factory reset mode, but when I press power + volume up it only vibrates. There is no home button on this phone. I also tried pressing all 3 buttons power, vol up and down, which just turned the phone off now finally, but I can't get into the factory reset mode. Also power plus volume down just reboot the phone.
//EDit: In case someone has the same issue: Power off the phone by pressing all 3 buttons, after that wait for 10 minutes then power on the phone by pressing power plus volume down until the android logo appears, stop pressing the power button and keep pressing volume down.
post can be closed.

Categories

Resources