Hi All
I had and still have the latest software for SM-G930F
I followed a tutorial to root my s7 but then realised that root does not work properly on android 8.0.0
I would love some help to un-root my s7.
Baseband version
G930FXXS7ESL5
Build Number
R16NW.G930FXXS7ESL5
I have used odin to re flash original firmware but it still says the device is rooted.
like Samsung pass comes up this device is rooted so this option is unavailable.
i used sm-g930f cf-auto root, magic-disk and no-verify-opt-encrypt 6.1 and have twrp 3.3.1.0-herolte
it will only let me re-flash android 8.0.0 original firmware witch i though would wipe the the phone completely and un-root but i was most certainly wrong.
i wold love my s7 back on android 7.0 or below so that i can have a custom rom installed.
If you need more info let me know and thanks i advance to all the developers, moderators and users.
thanks
John
Hey there, since you have twrp already installed you could look into some of the custom roms if you want theres even Pie roms with OneUi avaliable, i have almost no experience with cf autoroot but if you want to completely get rid of previous system files before flashing the firmware select the option 'nand erase' in odin and make sure you fill every file to its respective field.
I would suggest against using 'plz' 'pls' in the title or your thread because that will most likely get you ignored, feel free to give me an update if that worked for you!
Related
Hi,my galaxy s6 is on version 5.1.1 with the G920FXXU2BOGG firmware and I want to root it but don't know the right method.I know that there is already a method on how to root galaxy s6 on 5.1.1 but does it support my firmware?because it is made to root the first 5.1.1 firmware or it supports all galaxy s6 5.1.1 firmwares?
hlm19 said:
Hi,my galaxy s6 is on version 5.1.1 with the G920FXXU2BOGG firmware and I want to root it but don't know the right method.I know that there is already a method on how to root galaxy s6 on 5.1.1 but does it support my firmware?because it is made to root the first 5.1.1 firmware or it supports all galaxy s6 5.1.1 firmwares?
Click to expand...
Click to collapse
Only way to get root on 5.1.1 thus far is by flashing TWRP recovery.
If you are an amateur to this sort of thing I would highly suggest not to do that.
It will void your warranty permanently by tripping KNOX which can't be "un-tripped"
May I ask why you think you need/want root?
I want to root my galaxy s6 as I see some good custom roms and want to try them.I've had some android phones before like the galaxy note 4,galaxy note 3,htc one m8 and galaxy nexus and rooted them.Just curious on how to root my gs6 with the XXU2BOGG firmware.Does the 5.1.1 root method supports my firmware?
hlm19 said:
I wan't to root my galaxy s6 as I see some good custom roms and want to try them.I've had some android phones before like the galaxy note 4,galaxy note 3,htc one m8 and galaxy nexus and rooted them.Just curious on how to root my gs6 with the XXU2BOGG firmware.Does the 5.1.1 root method supports my firmware?
Click to expand...
Click to collapse
Okay then, as long as you aware of the risks..
Rooting isn't device dependent, it's just software. It's supported on any firmware as long as you have TWRP installed. It just installs SuperSU for you into the system files.
http://forum.xda-developers.com/galaxy-s6/orig-development/twrp-t3080940
Pretty sure TWRP is supported on all models of S6/Edge, they all share the same hardware as each other.
Just flash it with Odin version 3.10.6.
Grab it here ZeroFLTE represents all S6 models except Sprint model which require their own special one (no idea why)
You then follow the Odin install method, making sure you're using 3.10.6. Otherwise more than likely will not work.
After installation of TWRP and then booting into TWRP you will be faced with the "SuperSU is not installed, would you like to install it?"
.. And done.
Er, actually I think that appears when when you go to restart via TWRP menu
But yeah.. best of luck, don't blame me if your phone explodes into a fire ball that goes nuclear and destroys the world.. Or simply bricks it
Edit: Wait are you talking about the Chainfire root method? If you are you may as well not even consider that if you're planning on custom firmware installs.. TWRP is your best bet because it isn't device/firmware specific like CF. And you need TWRP for firmware installs anyway..
Stevles said:
Okay then, as long as you aware of the risks..
Rooting isn't device dependent, it's just software. It's supported on any firmware as long as you have TWRP installed. It just installs SuperSU for you into the system files.
http://forum.xda-developers.com/galaxy-s6/orig-development/twrp-t3080940
Pretty sure TWRP is supported on all models of S6/Edge, they all share the same hardware as each other.
Just flash it with Odin version 3.10.6.
Grab it here ZeroFLTE represents all S6 models except Sprint model which require their own special one (no idea why)
You then follow the Odin install method, making sure you're using 3.10.6. Otherwise more than likely will not work.
After installation of TWRP and then booting into TWRP you will be faced with the "SuperSU is not installed, would you like to install it?"
.. And done.
Er, actually I think that appears when when you go to restart via TWRP menu
But yeah.. best of luck, don't blame me if your phone explodes into a fire ball that goes nuclear and destroys the world.. Or simply bricks it
Edit: Wait are you talking about the Chainfire root method? If you are you may as well not even consider that if you're planning on custom firmware installs.. TWRP is your best bet because it isn't device/firmware specific like CF. And you need TWRP for firmware installs anyway..
Click to expand...
Click to collapse
Thanks mate!So twrp now supports 5.1.1?
Welcome! TWRP has supported 5.1.1 since the latest version: 2.8.7.1. Change log is in the second post here. Take care and have fun
Stevles said:
Welcome! TWRP has supported 5.1.1 since the latest version: 2.8.7.1. Change log is in the second post here. Take care and have fun
Click to expand...
Click to collapse
Thanks again!But I thought the only way to root the gs6 with 5.1.1 is by using the unikernel something?as 5.1.1 is different than 5.0.2.
hlm19 said:
Thanks again!But I thought the only way to root the gs6 with 5.1.1 is by using the unikernel something?as 5.1.1 is different than 5.0.2.
Click to expand...
Click to collapse
Not sure about that.. Perhaps install unikernal first just to be sure
Okay so go to the last page or two of the TWRP thread and start reading
Stevles said:
Not sure about that.. Perhaps install unikernal first just to be sure
Click to expand...
Click to collapse
Yeah,just checked and have to flash unikernel first and then the twrp via odin.If I root using this twrp method,it supports my 5.1.1 firmware right?Sorry for lots of asking.
hlm19 said:
Yeah,just checked and have to flash unikernel first and then the twrp via odin.If I root using this twrp method,it supports my 5.1.1 firmware right?Sorry for lots of asking.
Click to expand...
Click to collapse
Assuming it doesn't boot loop with unikernel (all reports say it's fine) then yeah you won't have any dramas with root via TWRP.. Like I said it's just software, the boot loop comes from Samsung being slippery Gypsies and modifying their kernels to basically stop people from modifying system partitions. Hence the need for a custom kernel to bypass that crap. You'll be fine
Stevles said:
Assuming it doesn't boot loop with unikernel (all reports say it's fine) then yeah you won't have any dramas with root via TWRP.. Like I said it's just software, the boot loop comes from Samsung being slippery Gypsies and modifying their kernels to basically stop people from modifying system partitions. Hence the need for a custom kernel to bypass that crap. You'll be fine
Click to expand...
Click to collapse
Yeah,and if I need to unroot it,I do just flash the official firmware via odin?
hlm19 said:
Yeah,and if I need to unroot it,I do just flash the official firmware via odin?
Click to expand...
Click to collapse
Sorry for delayed response.. Yes flashing a firmware tar. md5 will reset the system partition back to full stock and replace the recovery, kernel, modem etc.
Just download one corresponding to your device ie.. SM-G92XX where the first X is either a 5 or 0 and the second is the country or region the phone was intended for. I keep the latest firmware for my device and country (not carrier because it has too much bloatware) around at all times to undo any screw ups and start again
Stevles said:
Sorry for delayed response.. Yes flashing a firmware tar. md5 will reset the system partition back to full stock and replace the recovery, kernel, modem etc.
Just download one corresponding to your device ie.. SM-G92XX where the first X is either a 5 or 0 and the second is the country or region the phone was intended for. I keep the latest firmware for my device and country (not carrier because it has too much bloatware) around at all times to undo any screw ups and start again
Click to expand...
Click to collapse
Thanks for the help!Will try it
Try this:
http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
roydok said:
Try this:
http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
Click to expand...
Click to collapse
I think he may have already actually, thanks for your input. It was certainly mentioned earlier but now there's a link which is always nice
What does tripping KNOX do? I like and would like to continue using the Tap & Pay feature from my bank. Is KNOX separate from the secure element the bank uses?
Other than providing a separate environment for work, what else does KNOX provide?
I have a t-mobile s3 that was at one time rooted then updated to the latest firmware root was lost and never rerooted. I was running the latest update totally stock no modifications. The phone wont complete the boot it just hangs at the end where the samsung is going from blue to white. The phone will go into download mode and recovery however when i tried to do a factory reset on it it failed. The device is not rooted so i cant flash a rom to it. I dont know how to fix it. I dont know what version of odin to use and am not sure what rom to put on it or if i can even do it. I connected the phone to odin and it said s4 mini so I am thinking that is not the version of odin to even try and flash the stock firmware. any suggestions on how to fix my phone or if it can be fixed?
Hello,
Welcome to XDA.
I cant post a link for you but you can go to Sammobile or samsung-updates and use your model number to find your stock firmware. I'm sure there will be more than one android version for your device so choose whichever you want, just be mindful of which ones are rootable or not if you want to root it again at some point. Then use at least Odin version 3.09 or newer, make sure you have the newest version of "USB drivers for Samsung phones" installed.
If you have more questions or need further assistance you can post your question in the forum linked below.
http://forum.xda-developers.com/galaxy-s3-t-mobile/help
The experts there may be able to help, good luck.
Hello everyone,
I just got my new S7 from Telus and my goal now is:
Root the phone
Install a clean stock ROM (bloatware-free)
Now I've been reading a bit but I'm a little unsure whether I'm looking at the best solution out there, or even if I'm on the right track.
These are the 2 options that I'm leaning towards following:
http://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770
http://forum.xda-developers.com/galaxy-s7/development/sm-g930-exynos-cf-auto-root-t3337353
Can you tell me if the TWRP route is the best to follow?
Also, I can't seem to find a Stock ROM, can you point me to the right one for my phone? (Sorry, my searching and Googling skills needs an upgrade.)
Installing twrp wipes the phone, so you lose everything. If you install cfroot first on the other hand, you can backup your stuff with titanium backup and other apps and then install twrp and restore your apps at the end.
http://samsung-updates.com/device/?id=SM-G930W8
peachpuff said:
Installing twrp wipes the phone, so you lose everything. If you install cfroot first on the other hand, you can backup your stuff with titanium backup and other apps and then install twrp and restore your apps at the end.
http://samsung-updates.com/device/?id=SM-G930W8
Click to expand...
Click to collapse
I'm ok with the wipe as I just got the phone today so I have nothing important there.
So would you suggest that I use TWRP over cfroot?
--Also, do you know where the right stock ROM is? I still can't find one.-- Oops, sorry I thought the link you have was part of your signature. I got my ROM now, taking a long time to download though. Haha.
Is there another download location I can use? I messed up the slow download and now I have to wait a long time just to start over with the slow download.
TWRP install does not wipe the phone. If you want to use TWRP to backup/restore data you have to format data (which does wipe the phone), because TWRP does not support the samsung encryption yet (no timeframe for this).
You could still use TWRP to install stuff on /system.
I would go cfroot and flashfire.
quick question here: I've got 930w8 from Bell (Canadian version). on https://autoroot.chainfire.eu/ I Cannot see CF-auto-root root for W8 version.
Is it safe to guess that auto-root for 930f (exynos) will do the trick?
starche_old said:
quick question here: I've got 930w8 from Bell (Canadian version). on https://autoroot.chainfire.eu/ I Cannot see CF-auto-root root for W8 version.
Is it safe to guess that auto-root for 930f (exynos) will do the trick?
Click to expand...
Click to collapse
yes
Opticuhl said:
yes
Click to expand...
Click to collapse
thank you bro
Looking to root my Galaxy S7 locked to Rogers, build SM-G930W8. Any suggestions?
JohnnyB79 said:
Looking to root my Galaxy S7 locked to Rogers, build SM-G930W8. Any suggestions?
Click to expand...
Click to collapse
You can use Cf Auto root for G930F, is working
Hello!
Just wondering if this CF Root will work to root my device still?
It's April 4, 2017, so this thread is really old.
I've gathered that I can use CF-Auto Root G930F and have that downloaded..
I got my phone from Virgin and live in Canada
It's a Samsung Galaxy S7
Model Number : SM-G930W8 (LU2BQB6)
Android Version : 7.0
I'm trying to spoof Pokemon GO haha, and apparently I need to move some apps to a system folder or something.
First thing first though, figure out how to root.
Quite frankly, I'd be willing to send someone a couple bucks via paypal for any assistance at all.
I can tell you that cf autoroot for international model works on android 6.0.1, not sure if will do the job on android 7
S7 android 7.0 root
Is there a root for android 7.0 for an S7?
tidrew21 said:
Is there a root for android 7.0 for an S7?
Click to expand...
Click to collapse
https://autoroot.chainfire.eu/ look in there.
samsung SM-G930W8 heroltebmc heroltebmc universal8890 exynos5 NRD90M.G930W8VLU2BQG4 7.0 44 811 638 Download 28303a60ba77363c26dab7695905de65 27 550
Theres a download link for your phone on android 7. I didn't try it tho so I cant tell if it works or not. Hope this helps.
hey guys ... i have the sm 930w8 .. im on the latest nougat RC2 can i root my phone with cfroot ? with this method or im doomed
Hello fellow g930w8
Before you root your phones look through threads here do some research all your answers are here follow instruction exactly then you will be A OKAY S5 USER ROOTED S7 SOON TO BE ROOTED
Had no problem rooting my phone with cf auto root. Had to make an app a system file then tried to unroot using the super su. Allways fails to unroot. Need safety net to pass
Hey I'm new here and hope I've got the right area to post in if not can you please direct me to where I can request an update to the CF auto-root for SM-G920W8, it is at 6.1 but I have 7.0
Hey I have an SM-G920W8 and I'm attempting to root for the first time just for pogo to get around the new update.
I've downloaded odin and the guide I was using last night warned not to flash a rom with a different version than your phone or it could result in bricking your phone.
I've figured everything else out, my phone is recognized and I can boot to download but I'm afraid to flash the old version.
I have no idea how to create any of this on my own so I'd like to formally request an update for this version of the phone.
Thank you for your time and directions.
SM-G920W8 with baseband G920W8VLU5DQD4
Chainfire I am also wondering if there is plans for any CF-Auto root for our Canadian phone now that the Version 7 ROM is out?
Is there anything needed from us to get this update of CF-Auto root added to your list?
if no CF-Auto root can we flash the SuperSU 2.82 using TWRP for our phones? I tried 2.79... and TWRP stopped part way through and got a bootloop when i rebooted the phone.
I have a G930v which we all know can be crossed flashed.
I am switching to freedompop but that not the point of this thread.
I did do the nogut root but none of the modification for battery non performance, something happened where the root came off and I get "unauthorized app" but knox isnt tripped.
so I decided i'm just going to wipe my phone and start over.
I want a de-dedoxed , de-bloated, and de-googled phone, running root and xposed, because I would like to run MicroG on my phone.
Whats the best and lastest firmware from updato? I should download since samfirmware takes forever and a day to download.
any help is greatly appreciated.
You can only flash stock, so any G930U (unbranded) ROM would be the only option but they're not "de-google'd" as you put it