Is there a way to remove the annoying unlocked bootloader black screen at every reboot? I tried to flash a new logo by fastboot with "fastboot flash logo logo_a logo.bin" and "fastboot flash logo logo_b logo.bin" but it didn't work. The black screen still stays there. Any help?
merlinolillo said:
Is there a way to remove the annoying unlocked bootloader black screen at every reboot? I tried to flash a new logo by fastboot with "fastboot flash logo logo_a logo.bin" and "fastboot flash logo logo_b logo.bin" but it didn't work. The black screen still stays there. Any help?
Click to expand...
Click to collapse
not till now. But maybe in future
merlinolillo said:
Is there a way to remove the annoying unlocked bootloader black screen at every reboot? I tried to flash a new logo by fastboot with "fastboot flash logo logo_a logo.bin" and "fastboot flash logo logo_b logo.bin" but it didn't work. The black screen still stays there. Any help?
Click to expand...
Click to collapse
No but besides you don't want to remove it because of the option you get during it which is "pause boot" which could be useful in some cases.
SnowTalker said:
No but besides you don't want to remove it because of the option you get during it which is "pause boot" which could be useful in some cases.
Click to expand...
Click to collapse
But a new boot logo won't change the function of any hard keys!! A logo.bin contains images! It doesn't matter which one of the images are shown during the boot process, the hard key still keeps its functions.
---------- Post added at 03:50 PM ---------- Previous post was at 03:35 PM ----------
merlinolillo said:
Is there a way to remove the annoying unlocked bootloader black screen at every reboot? I tried to flash a new logo by fastboot with "fastboot flash logo logo_a logo.bin" and "fastboot flash logo logo_b logo.bin" but it didn't work. The black screen still stays there. Any help?
Click to expand...
Click to collapse
You can upload any image you would like to boot. That's no problem! An image with a resolution of 1.080x2.280 in .png format would be perfect, but it's not mandatory. Any other resolution must be resized to 1.080x2.280!!
WoKoschekk said:
But a new boot logo won't change the function of any hard keys!! A logo.bin contains images! It doesn't matter which one of the images are shown during the boot process, the hard key still keeps its functions.
---------- Post added at 03:50 PM ---------- Previous post was at 03:35 PM ----------
You can upload any image you would like to boot. That's no problem! An image with a resolution of 1.080x2.280 in .png format would be perfect, but it's not mandatory. Any other resolution must be resized to 1.080x2.280!!
Click to expand...
Click to collapse
I've tried. It doesn't work
merlinolillo said:
I've tried. It doesn't work
Click to expand...
Click to collapse
Tried to upload an image? Use MEGA or Drive.
merlinolillo said:
I've tried. It doesn't work
Click to expand...
Click to collapse
Unlocked bootloader screen is replaced by stock logo.
WoKoschekk said:
Unlocked bootloader screen is replaced by stock logo.
Click to expand...
Click to collapse
Yes, just tried and it doesn't work anymore. Newer Motorola models are different from the older ones
merlinolillo said:
Yes, just tried and it doesn't work anymore. Newer Motorola models are different from the older ones
Click to expand...
Click to collapse
The logo.bin I created does not work??
---------- Post added at 10:44 PM ---------- Previous post was at 10:25 PM ----------
I did not use the "Motorola Boot Logo Maker" tool for this. I use a python script for un-/repack the .bin file.
WoKoschekk said:
The logo.bin I created does not work??
---------- Post added at 10:44 PM ---------- Previous post was at 10:25 PM ----------
I did not use the "Motorola Boot Logo Maker" tool for this. I use a python script for un-/repack the .bin file.
Click to expand...
Click to collapse
Not for me. I've flashed your logo for A and B partitions and the bootloader warning is still there. Try by yourself and you will see it doesn't work.
merlinolillo said:
Not for me. I've flashed your logo for A and B partitions and the bootloader warning is still there
Click to expand...
Click to collapse
At least that tells us that the logo.bin works and is repacked correctly.
Which one of the attached logos do you see?
For any reasons I can't open the images...
---------- Post added at 11:15 PM ---------- Previous post was at 11:08 PM ----------
image01
image02
image03
This should work...sorry!
It's that in my attachment. As you can see it's not a logo. It's something inside the bootloader and I doubt it can be hidden.
merlinolillo said:
It's that in my attachment. As you can see it's not a logo. It's something inside the bootloader and I doubt it can be hidden.
Click to expand...
Click to collapse
I don't know why but it's not possible for me to open the image.
Every image I upload doesn't work. I don't know why. But the bootloader unlocked warning that appears in the Moto G8 plus is not a logo.
merlinolillo said:
Every image I upload doesn't work. I don't know why. But the bootloader unlocked warning that appears in the Moto G8 plus is not a logo.
Click to expand...
Click to collapse
Use this image hoster and share the link.
https://imgbb.com/
WoKoschekk said:
I don't know why but it's not possible for me to open the image.
Click to expand...
Click to collapse
WoKoschekk said:
Use this image hoster and share the link.
https://imgbb.com/
Click to expand...
Click to collapse
The picture isn't good but as you can see is not the same screen of the older Moto G models https://ibb.co/CKPDFm8
merlinolillo said:
The picture isn't good but as you can see is not the same screen of the older Moto G models https://ibb.co/CKPDFm8
Click to expand...
Click to collapse
That's new, you're right.
It's not a logo within the meaning of an image which could be replaced. This is a kind of "info/warning text" created by the bootloader. There's no way to fix it.
WoKoschekk said:
That's new, you're right.
It's not a logo within the meaning of an image which could be replaced. This is a kind of "info/warning text" created by the bootloader. There's no way to fix it.
Click to expand...
Click to collapse
And if I block the bootloader again, will the warning be removed?
felixp_ said:
And if I block the bootloader again, will the warning be removed?
Click to expand...
Click to collapse
No, it won't. You can only get the BL status 'flashing_locked' but not 'oem_locked' which is necessary to deactivate this warning
Related
Hi there!
I just had a go at flashing my new HTC One M8, and I'm stuck in recovery mode.
I followed these instructions:
androidcentral.us/2014/04/root-att-htc-one-m8/
But got the TWRP file from here because the original link was overloaded:
androidfiles.org/?developer=M8&folder=Recoveries
I essentially just ran:
Code:
fastboot-mac erase
cachefastboot-mac
flash boot recovery.img
fastboot-mac reboot
Then installed the SuperSU update zip. Now every time I try reboot into the Android system, it boots into recovery mode. If I boot into the bootloader, I get the option to boot using fastboot but that appears to fail (it returns me to the bootloader after a second). If I select hboot, it says "No image or wrong image!" after trying to load a .nbh file.
Any ideas?
BTW, I got the unlocked version from Amazon: amazon.com/HTC-One-M8-Unlocked-Warranty/dp/B00J3554KE/
marcog123 said:
hi there!
I just had a go at flashing my new htc one m8, and i'm stuck in recovery mode.
I followed these instructions:
Androidcentral.us/2014/04/root-att-htc-one-m8/
but got the twrp file from here because the original link was overloaded:
Androidfiles.org/?developer=m8&folder=recoveries
i essentially just ran:
Code:
fastboot-mac erase
cachefastboot-mac
flash boot recovery.img
fastboot-mac reboot
then installed the supersu update zip. Now every time i try reboot into the android system, it boots into recovery mode. If i boot into the bootloader, i get the option to boot using fastboot but that appears to fail (it returns me to the bootloader after a second). If i select hboot, it says "no image or wrong image!" after trying to load a .nbh file.
Any ideas?
Btw, i got the unlocked version from amazon: Amazon.com/htc-one-m8-unlocked-warranty/dp/b00j3554ke/
Click to expand...
Click to collapse
you flashed recovery to kernel partition! The guide is wrong as i read.
To flash recovery:
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot-bootloader
BUT you will also need to flash the kernel again as you just messed it up!
Ouch! Ok, that sucks that steps I was following were wrong. :/ But at least I feel less like an idiot.
So I found a boot.img from here: http://forum.xda-developers.com/showthread.php?p=51580259 and flashed that. Now I'm not returning to the recovery screen, but to the bootloader always and it gives the same message about wrong image.
Here are the commands I ran:
Code:
./fastboot-mac erase cache
./fastboot-mac flash boot boot.img
./fastboot-mac flash recovery Recovery.img
./fastboot-mac reboot
marcog123 said:
Ouch! Ok, that sucks that steps I was following were wrong. :/ But at least I feel less like an idiot.
So I found a boot.img from here: http://forum.xda-developers.com/showthread.php?p=51580259 and flashed that. Now I'm not returning to the recovery screen, but to the bootloader always and it gives the same message about wrong image.
Here are the commands I ran:
Code:
./fastboot-mac erase cache
./fastboot-mac flash boot boot.img
./fastboot-mac flash recovery Recovery.img
./fastboot-mac reboot
Click to expand...
Click to collapse
can you stil enter fastboot mode?
Is fastboot mode the one where you see "FASTBOOT USB" in red on top? Cause I can get into that and connect to my phone from my laptop.
marcog123 said:
Is fastboot mode the one where you see "FASTBOOT USB" in red on top? Cause I can get into that and connect to my phone from my laptop.
Click to expand...
Click to collapse
Thats good. I'll help you get back working phone.
BUT i need some info:
Please tell me what bootloader is about:
HBoot and so on. Also i need to know if its an "UNLOCKED" phone sold by a carrier. Or a carrier free phone. Because you will need fittig software for each model.
The info on top of the bootloader screen?
Code:
M8_UL_CA PVT SHIP S-ON
HBOOT-3.16.0.0000
RADIO-1.15.2133156.UA03_2G
OpenDSP-v26.2.2-00538-M8974.0106
OS-1.12.1540.17
eMMC-boot 2048MB
Mar 3 2014,20:18:02.0
It's an unlocked (carrier free) phone sold by Amazon: amazon.com/HTC-One-M8-Unlocked-Warranty/dp/B00J3554KE/
Okay. Will get the right files.
Sent from my beloved HTC One S using (most time buggy) Tapatalk
The kernel you flashed is for "SPRINT" m8 and NOT COMPATIBLE to your device. Just don't flash any files as long as you don't know if theyre matching your phone please.
Did you flash the TWRP 2703 version?
Yes, 2.7.0.3.
Thanks so much for all your help so far! I hugely appreciate how quickly you're jumping on helping me.
marcog123 said:
Yes, 2.7.0.3.
Thanks so much for all your help so far! I hugely appreciate how quickly you're jumping on helping me.
Click to expand...
Click to collapse
can you enter TWRP?
by select "recovery" in bootloader
---------- Post added at 07:22 PM ---------- Previous post was at 07:17 PM ----------
marcog123 said:
Yes, 2.7.0.3.
Thanks so much for all your help so far! I hugely appreciate how quickly you're jumping on helping me.
Click to expand...
Click to collapse
can you enter TWRP?
by select "recovery" in bootloader
This kernel may work: http://androidfil.es/1mSt Don't flash it yet.
Yes, that gets me into TWRP!
marcog123 said:
Yes, that gets me into TWRP!
Click to expand...
Click to collapse
Just that you know, that is YOUR phone:
x.xx.1540.x - HTC One U.S. Developer Edition
I'm looking for a stock rom, if that is not possible you will have to use a custom rom
---------- Post added at 07:33 PM ---------- Previous post was at 07:32 PM ----------
marcog123 said:
Yes, that gets me into TWRP!
Click to expand...
Click to collapse
Have you installed adb on your laptop? BTW are you using a apple mac?
Download this rom please --> LINK
The rom includes stock kerne. Just download it and we'll try to flash just the included kernel file as it should get your device back working.
Otherwise you'll have to flash full rom via twrp.
Please tell me when your download is ready. And this time do yourself a favor and DON'T act on your own as long as you don't know what you're doing...
Oh my, thanks so much that worked!! You're awesome! I honestly had a feeling I'd lost my phone.
Glad you got it back alive
Sent from my beloved HTC One S using (most time buggy) Tapatalk
LS.xD said:
Glad you got it back alive
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
tnx brother i also make same mistek i flash recover in kernel and now only in recover same information as i see above but in device its not show os...version......i try to download your file but its link expire......please help me.
my htc one is stuck in recovery mode
i have a htc one from verizon ( unlocked) it was upgrading but was taking too long so i disconnect the phone ( big mistake i know) since that i turn on my phone and i got this :
ANDROID SYSTEM RECOVERY <3e>
at botton shows the following:
E:missing bitmap oem_unlock_bg
(code-1)
write host mode success
handle _cota_install: No CW files. Skip cw installation
hope you can help me
wachoforeal said:
i have a htc one from verizon ( unlocked) it was upgrading but was taking too long so i disconnect the phone ( big mistake i know) since that i turn on my phone and i got this :
ANDROID SYSTEM RECOVERY <3e>
at botton shows the following:
E:missing bitmap oem_unlock_bg
(code-1)
write host mode success
handle _cota_install: No CW files. Skip cw installation
hope you can help me
Click to expand...
Click to collapse
HTC One M7 or M8 ?
ls.xd said:
htc one m7 or m8 ?
Click to expand...
Click to collapse
htc one m8
wachoforeal said:
htc one m8
Click to expand...
Click to collapse
Flash TWRP in fastboot mode.
Install STOCK ROM in TWRP.
Phone will be fine again
i am downloading the software but how do i install?
---------- Post added at 05:55 PM ---------- Previous post was at 05:36 PM ----------
wachoforeal said:
i am downloading the software but how do i install?
Click to expand...
Click to collapse
i have a problem , i have just downloaded the twrp , but whenever i try to open, its a disc image , that is correct?
---------- Post added at 06:10 PM ---------- Previous post was at 05:55 PM ----------
Phone will be fine again
i have a problem , i have just downloaded the twrp , but whenever i try to open, its a disc image , is that correct?
---------- Post added at 06:40 PM ---------- Previous post was at 06:10 PM ----------
fella something is wrong , the twrp is a image file its not a program .
Phone will be fine again
Hello everyone i am new here..
my moto g stuck in bootloop
fastboot -recovery and facatory reset also not working..
how can i fix this ?
moto g single sim 8gb
4.4.2 kitkat version
please reply me soon... waiting....
What you did and why you got the boot loop?
Sent from my XT1032 using XDA Premium 4 mobile app
padhu1989 said:
What you did and why you got the boot loop?
Sent from my XT1032 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
may be after moto g update to kitkat version... i dont remember.....
last night my mobile switched off and morning i just put on charging... and bootloop starting......
my moto g is from UK tesco mobile. comes with jeally bean..
and i update OTA in india kitkat version...
I can't seem to get into the recovery menu!
When I boot into fastboot I can select ‘Recovery’.
so i have unlocked bootloader...
now...
It displays 'bootloader unlocked' warning, then screen goes blank for a few seconds.
Then 'bootloader unlocked warning' displays again and again.....
jayrocky11 said:
I can't seem to get into the recovery menu!
When I boot into fastboot I can select ‘Recovery’.
so i have unlocked bootloader...
now...
It displays 'bootloader unlocked' warning, then screen goes blank for a few seconds.
Then 'bootloader unlocked warning' displays again and again.....
Click to expand...
Click to collapse
same in here :crying:
jayrocky11 said:
I can't seem to get into the recovery menu!
When I boot into fastboot I can select ‘Recovery’.
so i have unlocked bootloader...
now...
It displays 'bootloader unlocked' warning, then screen goes blank for a few seconds.
Then 'bootloader unlocked warning' displays again and again.....
Click to expand...
Click to collapse
Are you sure you are using volume up button to select a choice.
Pressing power button just reboots, volume down navigates and volume up selects
I made that mistae quite a number of times!
---------- Post added at 10:22 PM ---------- Previous post was at 09:35 PM ----------
jayrocky11 said:
may be after moto g update to kitkat version... i dont remember.....
last night my mobile switched off and morning i just put on charging... and bootloop starting......
my moto g is from UK tesco mobile. comes with jeally bean..
and i update OTA in india kitkat version...
Click to expand...
Click to collapse
Did you try flashing your phone back to Stock from fastboot?
http://forum.xda-developers.com/showthread.php?t=2542219
deej_roamer said:
Are you sure you are using volume up button to select a choice.
Pressing power button just reboots, volume down navigates and volume up selects
I made that mistae quite a number of times!
---------- Post added at 10:22 PM ---------- Previous post was at 09:35 PM ----------
Did you try flashing your phone back to Stock from fastboot?
http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
yes i am using volume up to select.. but not working any factory - recovery.. same bootloop comming again....
now i am goin to flash phone..... downloading stock.....
For you to be able to update the firmware (-> Android) there must not be root or a custom recovery on the phone. Remove both, flash again. Otherwise the updater throws an error and the phone will always reboot.
cyrus_ae said:
For you to be able to update the firmware (-> Android) there must not be root or a custom recovery on the phone. Remove both, flash again. Otherwise the updater throws an error and the phone will always reboot.
Click to expand...
Click to collapse
hmmmm..okk
thanks
I think I hard bricked my one plus one when updating to cm12.
It boots to the oneplus one logo, and stays there until the battery drains.
I have unlocked the bootloader and tried flashing factory images, using fastboot but the result is always the same, the oneplus one logo.
Anyone enountered a similar problem and how did you sort it out
briankariu said:
I think I hard bricked my one plus one when updating to cm12.
It boots to the oneplus one logo, and stays there until the battery drains.
I have unlocked the bootloader and tried flashing factory images, using fastboot but the result is always the same, the oneplus one logo.
Anyone enountered a similar problem and how did you sort it out
Click to expand...
Click to collapse
That's not hard brick, download this, unzip it, run flash-all.bat when in fastboot mode, it will be fixed
You don't have to let the battery drain, hold power button for 5 seconds or so and it will reboot. When hold power+volume + and connect the phone to PC and run flash-all.bat
Sent from my A0001 using Tapatalk
briankariu said:
I think I hard bricked my one plus one when updating to cm12.
It boots to the oneplus one logo, and stays there until the battery drains.
I have unlocked the bootloader and tried flashing factory images, using fastboot but the result is always the same, the oneplus one logo.
Anyone enountered a similar problem and how did you sort it out
Click to expand...
Click to collapse
@MZO is correct. Its not a hard brick if you're able to get into fastboot mode. Use the zip package that was linked to and flash through fastboot. Goof luck.
MZO said:
That's not hard brick, download this, unzip it, run flash-all.bat when in fastboot mode, it will be fixed
You don't have to let the battery drain, hold power button for 5 seconds or so and it will reboot. When hold power+volume + and connect the phone to PC and run flash-all.bat
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Hey will this work for me? When I turn my phone on , after the +1 Logo the screen goes black (but is still backlit and LEDs are turned on). The same thing happens when I try and access recovery mode. Fastboot mode however, still works. Would your link fix my phone too by any chance?
MZO said:
That's not hard brick, download this, unzip it, run flash-all.bat when in fastboot mode, it will be fixed
You don't have to let the battery drain, hold power button for 5 seconds or so and it will reboot. When hold power+volume + and connect the phone to PC and run flash-all.bat
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks. Let me give this a shot. will report in a few minutes
Pup_Skag said:
Hey will this work for me? When I turn my phone on , after the +1 Logo the screen goes black (but is still backlit and LEDs are turned on). The same thing happens when I try and access recovery mode. Fastboot mode however, still works. Would your link fix my phone too by any chance?
Click to expand...
Click to collapse
Yea it will
Sent from my A0001 using Tapatalk
---------- Post added at 08:58 PM ---------- Previous post was at 08:58 PM ----------
briankariu said:
Thanks. Let me give this a shot. will report in a few minutes
Click to expand...
Click to collapse
Great!
Sent from my A0001 using Tapatalk
MZO said:
Yea it will
Sent from my A0001 using Tapatalk
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks! I'll give it a go now
MZO said:
That's not hard brick, download this, unzip it, run flash-all.bat when in fastboot mode, it will be fixed
You don't have to let the battery drain, hold power button for 5 seconds or so and it will reboot. When hold power+volume + and connect the phone to PC and run flash-all.bat
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Nope. Not working. Just finished flashing and I am still stuck on the oneplus logo.
briankariu said:
Nope. Not working. Just finished flashing and I am still stuck on the oneplus logo.
Click to expand...
Click to collapse
Type fastboot -w
THANK the post if I deserve
MZO said:
Type fastboot -w
THANK the post if I deserve
Click to expand...
Click to collapse
Flashed again just to be double sure. I also ran the fastboot -w command, but I am still booting to the oneplus one logo.
Could it be the PC I am using because I am on windows 10-however, all the commands return that they have ran successfully....
briankariu said:
Flashed again just to be double sure. I also ran the fastboot -w command, but I am still booting to the oneplus one logo.
Could it be the PC I am using because I am on windows 10-however, all the commands return that they have ran successfully....
Click to expand...
Click to collapse
Woah. Seems pretty unusual. Try
fastboot erase boot
fastboot erase system
fastboot flash boot boot.img
fastboot flash system system.img
Never saw this issue before. :/
THANK the post if I deserve
I had somewhat of the same issue some time back and ended up flashing stock cm11s to fix it. There is a thread here on xda, but I have this link bookmarked, https://www.reddit.com/r/oneplus/comments/31sf0x/guide_how_to_return_from_oxygenos_to_stock_cm11s . Won't hurt to try flashing cm11s and see.
MZO said:
Woah. Seems pretty unusual. Try
fastboot erase boot
fastboot erase system
fastboot flash boot boot.img
fastboot flash system system.img
Never saw this issue before. :/
THANK the post if I deserve
Click to expand...
Click to collapse
Hey, When I try and run 'flash-all' it just opens for a millisecond and then just closes straight away. I've tried running as administrator and it made no difference. Any ideas what I could do to fix this?
Pup_Skag said:
Hey, When I try and run 'flash-all' it just opens for a millisecond and then just closes straight away. I've tried running as administrator and it made no difference. Any ideas what I could do to fix this?
Click to expand...
Click to collapse
Hold shift, right click and open command prompt there, then in it write flash-all.bat it will show you output
THANK the post if I deserve
Pup_Skag said:
Hey, When I try and run 'flash-all' it just opens for a millisecond and then just closes straight away. I've tried running as administrator and it made no difference. Any ideas what I could do to fix this?
Click to expand...
Click to collapse
Try and do a manual flash, the batch file may not work properly. Follow guide I just posted above for fastboot commands.
kenboyles72 said:
Try and do a manual flash, the batch file may not work properly. Follow guide I just posted above for fastboot commands.
Click to expand...
Click to collapse
Do manually flash each file in that folder individually then?
---------- Post added at 06:28 PM ---------- Previous post was at 06:22 PM ----------
MZO said:
Hold shift, right click and open command prompt there, then in it write flash-all.bat it will show you output
THANK the post if I deserve
Click to expand...
Click to collapse
kenboyles72 said:
Try and do a manual flash, the batch file may not work properly. Follow guide I just posted above for fastboot commands.
Click to expand...
Click to collapse
Wait, Think I got it! Thanks guys
Pup_Skag said:
Do manually flash each file in that folder individually then?
---------- Post added at 06:28 PM ---------- Previous post was at 06:22 PM ----------
Wait, Think I got it! Thanks guys
Click to expand...
Click to collapse
Ah I'm happy it did Enjoy flashing 13! (though it sucks meh)
THANK the post if I deserve
i am going to share this post because this is not available here,
How to Root your Doogee BL7000
1. download twrp recovery https://androidfilehost.com/?fid=817906626617934998
2. unlock bootloader using this code
Code:
fastboot oem unlock
3. flash twrp using this code
Code:
fastboot flash recovery 'file name with format'
4. then download magisk https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
5. reboot to recovery and create a backup of your ROM and then flash Magisk..
twrp taken from this article-
https://romprovider.com/2017/09/twrp-recovery-root-doogee-bl7000/
Hi, where to write the code?
Tgere is an option in developer options to unlock bootloader, does it work?
Talionator said:
Hi, where to write the code?
Tgere is an option in developer options to unlock bootloader, does it work?
Click to expand...
Click to collapse
in CMD if you don't know you can use included Script
Alright, but where to find doggee bl7000 drivers I cant find them
---------- Post added at 12:49 PM ---------- Previous post was at 12:49 PM ----------
Its stuck on waiting for device
Means no Driver Installed on Your PC
mark332 said:
Means no Driver Installed on Your PC
Click to expand...
Click to collapse
phone got bootloop on orange state on logo
Mine got too
Talionator said:
phone got bootloop on orange state on logo
Click to expand...
Click to collapse
What i'm supposed to do ??? Mine got bootlooped too !
Bootloop
You must follow that instruction i got a bootloop after that i fixed it
community.doogee.cc/forum.php?mod=viewthread&tid=228&extra=page%3D1
and please use that firmware only for Dodgee BL7000
mega.nz/#!4W40QayS!8R7cJ6H0TwNPJpVQWpRWepGWI2Z0DiKC9A7GSHPlTz4
Hello. Do you know where to find a twrp for Doogee Bl12000 ? I can't find any. Thanks.
Bootloader is unlocked. I keep watching Needrom. Nothing so far ?
Found a TWRP at a russian site. "Rulsmart.com". No idea if it's reliable. No use anyway, because the zip file is encrypted.
Christian1968.Bolz said:
Hello. Do you know where to find a twrp for Doogee Bl12000 ? I can't find any. Thanks.
Bootloader is unlocked. I keep watching Needrom. Nothing so far ?
Found a TWRP at a russian site. "Rulsmart.com". No idea if it's reliable. No use anyway, because the zip file is encrypted.
Click to expand...
Click to collapse
I have the same phone, same question. Maybe the bl7000 way works for bl12000 too? Justin the TWRP infos. I will root with Magisk
---------- Post added at 08:20 AM ---------- Previous post was at 08:16 AM ----------
mark332 said:
i am going to share this post because this is not available here,
How to Root your Doogee BL7000
1. download twrp recovery https://androidfilehost.com/?fid=817906626617934998
2. unlock bootloader using this code
Code:
fastboot oem unlock
3. flash twrp using this code
Code:
fastboot flash recovery 'file name with format'
4. then download magisk https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
5. reboot to recovery and create a backup of your ROM and then flash Magisk..
twrp taken from this article-
https://romprovider.com/2017/09/twrp-recovery-root-doogee-bl7000/
Click to expand...
Click to collapse
I have a BL12000 and i am looking for install TWRP. May these steps works for it too?
steathnic666 said:
I have the same phone, same question. Maybe the bl7000 way works for bl12000 too? Justin the TWRP infos. I will root with Magisk
---------- Post added at 08:20 AM ---------- Previous post was at 08:16 AM ----------
I have a BL12000 and i am looking for install TWRP. May these steps works for it too?
Click to expand...
Click to collapse
Not work
You can use Magisk for initial root
or wait while someone compile
After i followed the Instructions with the BL7000 unlock/root/ twrp tool , the bootloader was unlocked but the phone soft-bricked....Imei gone of course....back to stock rom....well...i tried to flash Twrp with flashtool, "size too big"
then tried to flash a smaller version of Twrp (13Mb ver. 3.2.1.0) that lead into total blackness....back to regular recovery...voila.....i dont wanna try the Tool again .....bootloader is still unlocked
i am giving up for now....
cheers...
Is there ANY working root method for the BL12000 (NOT pro) ? I've been looking for months now without success
hi my phone is stuck in a boot loop the doogee logo shows up after a couple of seconds screen turns off and doogee logo shows up again
i try to boot into recovery mode but nothing happens phone just turns on and bootloops i plug into my pc and get the usb connected sound then the usb disconnected sound then phone just bootloops can you help
I've been trying to set up twrp all day, but after almost every attempt, I gave up. If i put official and last twrp, the phone goes to bootloop and has to be flashed through MiFlash global ROM, after some custom twrp or Peter's twrp, nothing happens, if i try to enter recovery mode after some old twrp's, the phone automatically goes to bootloop.
What am I doing wrong, friends? Plz help.
Unlocked? I know stupid question but...
Fastboot, flash recovery, don't reboot and but ur finger on vol+ and power button?
What for steps u made and adb plus driver? Maybe some can help u.
joke19 said:
Unlocked? I know stupid question but...
Fastboot, flash recovery, don't reboot and but ur finger on vol+ and power button?
What for steps u made and adb plus driver? Maybe some can help u.
Click to expand...
Click to collapse
Yeah, ofc it was unlocked))) and I tried manually reboot device, but no effect.
For steps, I tried installed various fastboot files and many Many different twrp. But ADB plus, what's is that?
Thank you anyway
Do this and report back
1.Flash miui through mi flash
2.DONT BOOT INTO SYSTEM
3.Flash peters twrp through fastboot
4.Boot into recovery by using hardware keys....DONT USE fastboot reboot recovery command
5.Boot into system
24likan said:
Do this and report back
1.Flash miui through mi flash
2.DONT BOOT INTO SYSTEM
3.Flash peters twrp through fastboot
4.Boot into recovery by using hardware keys....DONT USE fastboot reboot recovery command
5.Boot into system
Click to expand...
Click to collapse
Yeah, but how i can flash twrp and then noot into recovery, if device after installing do autostart into system?
When starts booting into system.... Use hardware keys to boot into fastboot instead of booting into system... Do this very carefully
24likan said:
When starts booting into system.... Use hardware keys to boot into fastboot instead of booting into system... Do this very carefully
Click to expand...
Click to collapse
You mean use keys for booting into recovery, not to fastboot?
lastpixel said:
You mean use keys for booting into recovery, not to fastboot?
Click to expand...
Click to collapse
Bro don't confuse yourself.... Your aim is to not boot into system unless u fls recovery via fastboot... Read what i have posted and try it
24likan said:
Bro don't confuse yourself.... Your aim is to not boot into system unless u fls recovery via fastboot... Read what i have posted and try it
Click to expand...
Click to collapse
So, i did like yoy wrote in instruction, when was first reboot, i pressed button to enter into fastboot, then flashed twrp, then again restarted for finishing process of instalation. When all is completed, tried entereing into recovery, there's not twrp, just factory recovery was.
So doesn't work this one.
lastpixel said:
So, i did like yoy wrote in instruction, when was first reboot, i pressed button to enter into fastboot, then flashed twrp, then again restarted for finishing process of instalation. When all is completed, tried entereing into recovery, there's not twrp, just factory recovery was.
So doesn't work this one.
Click to expand...
Click to collapse
No first reboot. After flashing push direct the button for the recovery menu.
Or
fastboot boot recovery.img
Then flash the recovery.zip with the booted not flashed recovery.img
You are doing it wrong mate.... Anyways can you post the output of this command "fastboot oem device-info"... Read understand and do again.... Don't reboot or boot until u flash recovery.... Can't repeat everytime bro... You have to use your brain
joke19 said:
No first reboot. After flashing push direct the button for the recovery menu.
Or
fastboot boot recovery.img
Then flash the recovery.zip with the booted not flashed recovery.img
Click to expand...
Click to collapse
After flashing what? Rom? I don't get you man. After flashing Rom with Miflash, when device do restart, i need flashing twrp or enter to recovery, but for what need go to recovery if it still not there. Sorry for my noobs questions
https://aubykhan.wordpress.com/2013...t-into-twrp-or-cwm-recovery-without-flashing/
U flash ur recovery.img in fastboot, right.
Then don't reboot ur phone. Hold in fastboot the volume+ and power still to reboot and maybe ur phone go in ur twrp recovery
---------- Post added at 09:53 AM ---------- Previous post was at 09:52 AM ----------
lastpixel said:
After flashing what? Rom? I don't get you man. After flashing Rom with Miflash, when device do restart, i need flashing twrp or enter to recovery, but for what need go to recovery if it still not there. Sorry for my noobs questions
Click to expand...
Click to collapse
Not a rom ur recovery.img zip for flashing in custom recovery
24likan said:
You are doing it wrong mate.... Anyways can you post the output of this command "fastboot oem device-info"... Read understand and do again.... Don't reboot or boot until u flash recovery.... Can't repeat everytime bro... You have to use your brain
Click to expand...
Click to collapse
Code:
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: true
(bootloader) Charger screen enabled: false
OKAY [ 0.009s]
Finished. Total time: 0.014s
I can't get this "Don't reboot until flash recovery", but how, if device do this automatically, i tried holding power + vol-, got into fastboot, then flashed ur twrp, and then again reboot to system.
joke19 said:
https://aubykhan.wordpress.com/2013...t-into-twrp-or-cwm-recovery-without-flashing/
U flash ur recovery.img in fastboot, right.
Then don't reboot ur phone. Hold in fastboot the volume+ and power still to reboot and maybe ur phone go in ur twrp recovery
---------- Post added at 09:53 AM ---------- Previous post was at 09:52 AM ----------
Not a rom ur recovery.img zip for flashing in custom recovery
Click to expand...
Click to collapse
As i said before, i did it many times. There's happen or bootloop, come this logo funny bunny, or sometime it load to factory recovery.
I suppose, maybe something bad with adb drivers? Coz i didn't update it since i have RN5... But in console seems everything is ok, the device is connected and see.
U test the boot method?
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
lastpixel said:
As i said before, i did it many times. There's happen or bootloop, come this logo funny bunny, or sometime it load to factory recovery.
I suppose, maybe something bad with adb drivers? Coz i didn't update it since i have RN5... But in console seems everything is ok, the device is connected and see.
Click to expand...
Click to collapse
Right recovery lavender is note 7 and the pro violet
joke19 said:
U test the boot method?
Click to expand...
Click to collapse
Yeah, tried also this
Code:
C:\adb>fastboot boot twrp.img
Sending 'boot.img' (65536 KB) OKAY [ 1.403s]
Booting OKAY [ 0.133s]
Finished. Total time: 1.618s
device is rebooted and now stucked on logo Redmi
joke19 said:
U test the boot method?
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
Right recovery lavender is note 7 and the pro violet
Click to expand...
Click to collapse
I did with twrp from man who give link. Do you have right version?
https://files.orangefox.website/OrangeFox-Stable/
Lavender global and pro violet
---------- Post added at 10:51 AM ---------- Previous post was at 10:21 AM ----------
lastpixel said:
I did with twrp from man who give link. Do you have right version?
Click to expand...
Click to collapse
Now u're quite :laugh:
---------- Post added at 11:33 AM ---------- Previous post was at 10:51 AM ----------
And again not one time
I don't really understand asking you not to rebooting the device until I flash twrp. My steps: If I'm flashing through MiFlash, then the device automatically reboots, I tried to enter fastboot mode at the moment of reboot, and yeah I entered and flashed recovery(at least seems like that), but then when the device rebooted manually , again I see that there is not a custom recovery, maybe I missed something and your devices do not do automatic reboot during the flashing, or your instructions are wrong. Sorry man.