Related
Hi,
I have a problem with my Nexus 5, it bootloop on the Google Logo
I try to put a little piece of paper behind the power button and also to click on the power button a lot of times during the boot but it still stuck..
What can I do to try fix it ?
Thanks in advance
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
matgras said:
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
Click to expand...
Click to collapse
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
nathan30 said:
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
Click to expand...
Click to collapse
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
matgras said:
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
Click to expand...
Click to collapse
Did you try this solution or not ? To know if I can try to do it
nathan30 said:
Did you try this solution or not ? To know if I can try to do it
Click to expand...
Click to collapse
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
matgras said:
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
Click to expand...
Click to collapse
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
nathan30 said:
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
Click to expand...
Click to collapse
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
matgras said:
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
Click to expand...
Click to collapse
I can't have the phone booting, so I have to wait the new button ^^
nathan30 said:
I can't have the phone booting, so I have to wait the new button ^^
Click to expand...
Click to collapse
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
opssemnik said:
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
Click to expand...
Click to collapse
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
nathan30 said:
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
Click to expand...
Click to collapse
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
opssemnik said:
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
Click to expand...
Click to collapse
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
nathan30 said:
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
Click to expand...
Click to collapse
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
opssemnik said:
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
Click to expand...
Click to collapse
Oh i didn't understand, thanks a lot it's working
Now I'm just waiting my new power button
i had this **** sorry for swearing i thought its something with my ROM CM13 Nightly I tried the repair service they said that they changed the power button no data was deleted so its probably the button but some one had a guide how to get the phone out that **** using your PC and manual ADB commands ( No program command line only )
I need help with this issue
when this problem reached me it was a meter of replacing the power button itself (it's like stuck there) by the way my phone was still under warranty so they changed it for me
https://www.ifixit.com/Answers/View/208337/How+do+I+fix+a+Nexus+5+Power+Button+Issue
https://www.aliexpress.com/store/pr...821-NEW-Free-Shipping/629458_32289287372.html
https://www.aliexpress.com/popular/nexus-5-on-off-switch.html
If that helped you dont forget to press the thank you button
Hi,
After 2 days of research, I permit to ask your help. Since replacing my SIM tray soldering on the motherboard of my OPO, I can't boot my OPO normaly.
Just the recovery (TWRP) boot, I can "install", "restore" what I want, but after installing anything change, My OPO reboot into Recovery each time !
Maybe my OPO is briked ? Maybe is it possible to re install Fastboot if it's lost ? Can you help me please.
Thanks in advance for your help !
eramiel said:
Hi,
After 2 days of research, I permit to ask your help. Since replacing my SIM tray soldering on the motherboard of my OPO, I can't boot my OPO normaly.
Just the recovery (TWRP) boot, I can "install", "restore" what I want, but after installing anything change, My OPO reboot into Recovery each time !
Maybe my OPO is briked ? Maybe is it possible to re install Fastboot if it's lost ? Can you help me please.
Thanks in advance for your help !
Click to expand...
Click to collapse
You can't even boot to fastboot?
same here
Hi,
I have the same issue here, phone charged, can access TWRP, but no fastboot. hold up + power doesn't launch fastboot but recovery :|
Please help him :good:, I hope it will helps me too :angel:
cm-t said:
Hi,
I have the same issue here, phone charged, can access TWRP, but no fastboot. hold up + power doesn't launch fastboot but recovery :|
Please help him :good:, I hope it will helps me too :angel:
Click to expand...
Click to collapse
Not even able to boot into system,too?
Mr.Ak said:
You can't even boot to fastboot?
Click to expand...
Click to collapse
Sorry, no I can’t access into fastboot too
Maybe I supposed the Vol- vol+ button will be broken, but it seems good... For test, I can’t navigate in TWRP with vol- vol+ button but maybe is normal in 3.0.0 version, please can anyone test and say me is it same ?
eramiel said:
Sorry, no I can’t access into fastboot too
Maybe I supposed the Vol- vol+ button will be broken, but it seems good... For test, I can’t navigate in TWRP with vol- vol+ button but maybe is normal in 3.0.0 version, please can anyone test and say me is it same ?
Click to expand...
Click to collapse
Nope,those buttons doesn't work in twrp.
Open up your back cover and clean it(isopropyl alcohol would be awesome).Also,clean volume button strips a bit.At last, make sure you fit back cover correctly.
Thanks, I will clean this afternoon and tell you if resolve the problem
Mr.Ak said:
Nope,those buttons doesn't work in twrp.
Open up your back cover and clean it(isopropyl alcohol would be awesome).Also,clean volume button strips a bit.At last, make sure you fit back cover correctly.
Click to expand...
Click to collapse
Hi Mr AK,
As you advise me, I’ve cleaned the volume button with alcohol , unfortunately nothing has changed, I always boot to TWRP
eramiel said:
Hi Mr AK,
As you advise me, I’ve cleaned the volume button with alcohol , unfortunately nothing has changed, I always boot to TWRP
Click to expand...
Click to collapse
Did you clean the volume strips as well?
Yes, I’ve cleaned the back of the strip volume button, and test with the strip straight without the curve, and it is same problem...
Hi,
My problem persist, I can't boot in fastboot mode, maybe the fastboot partition is lost ? How can know it ? If is the case, How can I repair the partition please ?
Thanks in advance for your response.
Did you try rebooting to fastboot from either the TWRP menu or from your ROM?
Yes I tried, but it reboot in TWRP, no fastboot mode
Delete
Ok, but delete what and how ?
Try using the color os toolkit https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 and even though it says do not use if it is soft bricked use it this helped me
kallum7 said:
Try using the color os toolkit https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 and even though it says do not use if it is soft bricked use it this helped me
Click to expand...
Click to collapse
Hi Kallum,
Thanks for your help, I've allready test this toolkit, but for run process of this toolkit the OPO must to be in fastboot mode (I think) no ? Because I can't boot in fastboot :-/
eramiel said:
Hi Kallum,
Thanks for your help, I've allready test this toolkit, but for run process of this toolkit the OPO must to be in fastboot mode (I think) no ? Because I can't boot in fastboot :-/
Click to expand...
Click to collapse
No this toolkit does not run in fastboot mode what you need to do is power off the device and hold volume up and power and plug in your usb cable the screen should be black and then in device manager you should have a option called ports or if the driver for the qualccom port is not installed it should come up and right click the driver that is not installed and select find driver online once that is done click ms 9. Exe and run it as admin
kallum7 said:
No this toolkit does not run in fastboot mode what you need to do is power off the device and hold volume up and power and plug in your usb cable the screen should be black and then in device manager you should have a option called ports or if the driver for the qualccom port is not installed it should come up and right click the driver that is not installed and select find driver online once that is done click ms 9. Exe and run it as admin
Click to expand...
Click to collapse
Hi Kallum,
Thank you, with your help I've done the restoration of the OPO. But now when I power On the smartphone, it boot only the recovery of Color OS
I suppose is it died ?
eramiel said:
Hi Kallum,
Thank you, with your help I've done the restoration of the OPO. But now when I power On the smartphone, it boot only the recovery of Color OS
I suppose is it died ?
Click to expand...
Click to collapse
now please try booting into fastboot mode and then please get back in touch with me
Ok i unlocked my metro stylo4 and have been trying to root for the past few days...followinf the instructions on rooting with magisk, ive downloaded the apk and im supposed to install in recovery mode but my phone wont go into recovery now...all it will do is factory reset. Im holding down vol and power at same time then releasing and pressing power again when lg logo appears...what happened??
youe phone vibrate when booting up? release pressing power when it vibrate and keep holding VOL+ you don't need to wait for the logo
ineedroot69 said:
youe phone vibrate when booting up? release pressing power when it vibrate and keep holding VOL+ you don't need to wait for the logo
Click to expand...
Click to collapse
Ues it vibrates on startup
Blitzd187 said:
Ues it vibrates on startup
Click to expand...
Click to collapse
your phone is LG?
I did that and it brought me ton fastboot mode where i couldnt do anything and had to hard restart ...im bout to just give up...this apparently isnt for me
Blitzd187 said:
I did that and it brought me ton fastboot mode where i couldnt do anything and had to hard restart ...im bout to just give up...this apparently isnt for me
Click to expand...
Click to collapse
answer me is your phone LG?
apparently for
LG Stylo™ 4 | Metro by T-Mobile it is not VOL+ ... you should be pressing VOL- for recovery mode
I believe thats what i posted
Blitzd187 said:
I believe thats what i posted
Click to expand...
Click to collapse
you didn't indicate either VOL+ or VOL- your pressing anyway
ineedroot69 said:
you didn't indicate either VOL+ or VOL- your pressing anyway
Click to expand...
Click to collapse
You missread my post then..guess ill take some fault for not wording it correctly
Blitzd187 said:
You missread my post then..guess ill take some fault for not wording it correctly
Click to expand...
Click to collapse
Still doesnt goninto recovery though
ineedroot69 said:
apparently for
LG Stylo™ 4 | Metro by T-Mobileit is not VOL+ ... you should be pressing VOL- for recovery mode
Click to expand...
Click to collapse
ineedroot69 said:
you didn't indicate either VOL+ or VOL- your pressing anyway
Click to expand...
Click to collapse
Doesnt do that on mine..if i continually hold both buttons it constantly restarts my phone
ineedroot69 said:
apparently for
LG Stylo™ 4 | Metro by T-Mobileit is not VOL+ ... you should be pressing VOL- for recovery have not mentioned anything in my posts about pressing vol+...why keep stressing on it
Click to expand...
Click to collapse
Alright im out this guya not listening nor paying attention to my posts...just keeps repeating the same things over and over...excellent help sir...
Blitzd187 said:
Alright im out this guya not listening nor paying attention to my posts...just keeps repeating the same things over and over...excellent help sir...
Click to expand...
Click to collapse
you're welcome glad i could help
anyone can help me how fix this, bootloop on twrp logo and can't flash to stock recovery. I hope someone help me
I wanna back to factory recovery, tell me how to remove that ???
Model : SM-A750GN/DS
Scytheria said:
anyone can help me how fix this, bootloop on twrp logo and can't flash to stock recovery. I hope someone help me
Click to expand...
Click to collapse
Tern off phone with hold press vol down and power and when turned of connect charging cable and press vol down with vol up in the same time you will go to bootloader then flash stock
I such you have that issues with twrp of you fixed it tell me
play 5 said:
Tern off phone with hold press vol down and power and when turned of connect charging cable and press vol down with vol up in the same time you will go to bootloader then flash stock
I such you have that issues with twrp of you fixed it tell me
Click to expand...
Click to collapse
Unfortunelly, that not work, any have solution ?
Scytheria said:
Unfortunelly, that not work, any have solution ?
Click to expand...
Click to collapse
Dont say dont work im such you im have serched for this issues fixs more than 4 haur
Serch in youtube how to openA7 2018 bootloader
And dont lost you need to tern off phone then go to bootloader
If you pressed down vol with power in first 7 second it will be restart dont stop of pressing if the screen blacked for second time press vol up & down in some time
-Without power!!
And need your phone change with cable when you do all of thise↑
Firs take cable on your phone then do all of i writed then reply to me
play 5 said:
Dont say dont work im such you im have serched for this issues fixs more than 4 haur
Serch in youtube how to openA7 2018 bootloader
And dont lost you need to tern off phone then go to bootloader
If you pressed down vol with power in first 7 second it will be restart dont stop of pressing if the screen blacked for second time press vol up & down in some time
-Without power!!
And need your phone change with cable when you do all of thise↑
Firs take cable on your phone then do all of i writed then reply to me
Click to expand...
Click to collapse
THANKS A LOT MAN. I LOVE U SO MUCH !!!
Scytheria said:
THANKS A LOT MAN. I LOVE U SO MUCH !!!
Click to expand...
Click to collapse
You sloved it right?
play 5 said:
You sloved it right?
Click to expand...
Click to collapse
yeah man, thanks a lot for help me
Scytheria said:
anyone can help me how fix this, bootloop on twrp logo and can't flash to stock recovery. I hope someone help me
I wanna back to factory recovery, tell me how to remove that ???
Model : SM-A750GN/DS
Click to expand...
Click to collapse
Hey,
I have the same problem with the bootloop and the corrupted locking screen. I'm able to boot into download mode, but I can't figure out which system to flash. I tried several ones, but none of them worked... and I can't get back to the factory recovery. If somebody has an idea which recovery system could work I would be very pleased to know.
Software used to Flash: Odin
Device: a750fnxxu4ctc4
Scytheria said:
THANKS A LOT MAN. I LOVE U SO MUCH !!!
Click to expand...
Click to collapse
Hey , you gotta help me out here please !! i am not able to boot into download mode.
press all buttons at once (volume down + volume up + power button) until the screen turns black. Than immeadiatly press volume up and volume down button and insert cable connected to pc.
my oneplus 9 2110 stck in edl mode i cant reboot it by pressing volumeup/volume down and power button at same time but it doesnt reboot please help now how i can flash it with in edl mode or any msm tool for oneplus 9
Please describe what you did.
Did you try to root your phone?
Did you use any software to alter your phone?
With the right flash commands you can very easy recover your phone. You only need to pay attention to the steps.
noname122414 said:
Please describe what you did.
Did you try to root your phone?
Did you use any software to alter your phone?
With the right flash commands you can very easy recover your phone. You only need to pay attention to the steps.
Click to expand...
Click to collapse
My phone is in edl mode I can't go in to fastboot
My phone is rooted on 11.4.4.4 Eu i try to Flash 11.2.2.2 Global but unfortunately my phone bricked
Try holding different button combos for 5to10 seconds. Power and vol up
Shooter7889 said:
Try holding different button combos for 5to10 seconds. Power and vol up
Click to expand...
Click to collapse
I try all but it doesn't go to fastboot/recovery mode
Oh. Sometimes if I've been stuck in edl I could hold power and vol+ until it would finally boot or at least go to BL
Shooter7889 said:
Oh. Sometimes if I've been stuck in edl I could hold power and vol+ until it would finally boot or at least go to BL
Click to expand...
Click to collapse
Not work brother
Sry. Maybe it was power and vol-... It's been a while since I had been stuck in edl on my 7pro. Hope u find a way
Shooter7889 said:
Sry. Maybe it was power and vol-... It's been a while since I had been stuck in edl on my 7pro. Hope u find a way
Click to expand...
Click to collapse
Not work brother
When i connect to pc it show qualcomm 9008
Wolverine619 said:
Not work brother
When i connect to pc it show qualcomm 9008
Click to expand...
Click to collapse
Do fastboot commands work, you can reboot with them. Then try to flash back to a working EU rom.
noname122414 said:
Do fastboot commands work, you can reboot with them. Then try to flash back to a working EU rom.
Click to expand...
Click to collapse
Fastboot cmd also doesn't work
noname122414 said:
Do fastboot commands work, you can reboot with them. Then try to flash back to a working EU rom.
Click to expand...
Click to collapse
No thing work brother just waiting for msm tool
If anyone know another tool for flash in edl mode please tell me
Have to hold just the power button a very long time. Longer then you think is reasonable
You are supposed to use this post I think. Please edit the main post to the current status of your phone. What can you do and what you can't, maybe we'll be able to help.
Hi there, I am encountering the same issue.
It is a chinese op9
The situation:
The screen is totally black
connecting to power supply - no reaction
holding only power (30 sec) - no reaction
holding + - loudness - no reaction
holding + + loudness - seams like a reboot, because windows is reacting to it "Qualcom HS-USB QDLoader 9008 - Com4" work is disapearing and later on reapearing in device manager
In the MSM Tool it says:
1. Try to get PBL info
2. start download firehose binary and after 18sec.
3. Sahara communication failed....always
Any ideas or advices?
BR
AxelM said:
Hi there, I am encountering the same issue.
It is a chinese op9
The situation:
The screen is totally black
connecting to power supply - no reaction
holding only power (30 sec) - no reaction
holding + - loudness - no reaction
holding + + loudness - seams like a reboot, because windows is reacting to it "Qualcom HS-USB QDLoader 9008 - Com4" work is disapearing and later on reapearing in device manager
In the MSM Tool it says:
1. Try to get PBL info
2. start download firehose binary and after 18sec.
3. Sahara communication failed....always
Any ideas or advices?
BR
Click to expand...
Click to collapse
Same brother if you find any solution please share it with me also
So I sent my chinese device LE2110 to OP Europe and the repair should cost 380€....to fix a software bug....