[CLOSED][kernel][all n&s/10 models][aosp][performance][ctc9+] - Samsung Galaxy Note 10+ ROMs, Kernels, Recoveries,

Content removed,
Thread closed.

safe zone 1 from demonic incursion

safe zone 2 from demonic incursion

As your last thread got closed down I take it you'll be giving support here this time?

sevsman said:
As your last thread got closed down I take it you'll be giving support here this time?
Click to expand...
Click to collapse
I think he is busy developing the kernel, as it is, test releases are made almost twice a day. Kernel is faster and faster with every release.
I think the testers can help out.

I'll make sure he keeps it going for you guys

beany23 said:
I'll make sure he keeps it going for you guys
Click to expand...
Click to collapse
Not entirely, we keep him busy with requests though. Like make the device fly. Lol
He is very responsive and interactive.

Rc9 available on telegram channel.
Stable and fast.
Even asphalt 9 at max settings run smoothly.

Is it safe to use this kernel??
Coz the warnings are so frightening.. i am afraid of flashing this kernel

Stirio said:
Is it safe to use this kernel??
Coz the warnings are so frightening.. i am afraid of flashing this kernel
Click to expand...
Click to collapse
It's absolutely safe as long as you require power over battery. For gamers it's extremely good.

Stirio said:
Is it safe to use this kernel??
Coz the warnings are so frightening.. i am afraid of flashing this kernel
Click to expand...
Click to collapse
Lol almost every kernel or custom rom would contain the same amount of disclaimers.
Kernel is fine, temperatures are good, speed is amazing, battery life is not impacted but most of the times better.

sevsman said:
As your last thread got closed down I take it you'll be giving support here this time?
Click to expand...
Click to collapse
new kernel every day

hello kernel and compatible s10?

Juni3769 said:
hello kernel and compatible s10?
Click to expand...
Click to collapse
No!

What's the correct way to flash this ?
* Flashed Stock CTE9
* Flashed TWRP / Wipe
* TWRP -> Flash Nemesis Disabler
* TWRP - Flash Image - Select the extracted Image file - Boot Slot
* Flash Magisk
* Reboot
Ends up in a Black screen, Any help guys ?

blixer said:
No!
Click to expand...
Click to collapse
ok thank you but i found the version for the s10 on telegram

JazonX said:
What's the correct way to flash this ?
* Flashed Stock CTE9
* Flashed TWRP / Wipe
* TWRP -> Flash Nemesis Disabler
* TWRP - Flash Image - Select the extracted Image file - Boot Slot
* Flash Magisk
* Reboot
Ends up in a Black screen, Any help guys ?
Click to expand...
Click to collapse
Dont flash Magisk. Magisk is integrated into kernel! you cant update Magisk yourself too.
Its the same on every Kernel for S10/Note10 devices ( say thanks to sammy )

JazonX said:
What's the correct way to flash this ?
* Flashed Stock CTE9
* Flashed TWRP / Wipe
* TWRP -> Flash Nemesis Disabler
* TWRP - Flash Image - Select the extracted Image file - Boot Slot
* Flash Magisk
* Reboot
Ends up in a Black screen, Any help guys ?
Click to expand...
Click to collapse
Which TWRP did you flash?

blixer said:
Which TWRP did you flash?
Click to expand...
Click to collapse
Îs it out for N976b users too?

manager77 said:
Îs it out for N976b users too?
Click to expand...
Click to collapse
I'm not sure if it's published till now. Think you should better ask here
https://forum.xda-developers.com/ga...15-02-2020-t4051387/post81771755#post81771755

Related

SM-J700T T-Mobile 6.0.1 MM Help

Ok i have followed insturctions from
Code:
http://forum.xda-developers.com/galaxy-j7/j700t-development/recovery-twrp-v3-galaxy-j7-metropcs-t3427499
But once i reboot my phone i get stuck at the T-Mobile Splash Screen.
I have tried a number of things to root this phone and nothing works.
So my questions is this...... Is there or is there not any types of root for the
Galaxy J7 SM-J700T T-Mobile MM 6.0.1
Let me know
http://www.androidinfotech.com/2016/07/root-samsung-galaxy-j7-sm-j700t-t.html?m=1
Try this
devilav said:
http://www.androidinfotech.com/2016/07/root-samsung-galaxy-j7-sm-j700t-t.html?m=1
Try this
Click to expand...
Click to collapse
No good same results
Gets stuck at T-Mobile Boot Screen
rinnycoop121 said:
Ok i have followed insturctions from
Code:
http://forum.xda-developers.com/galaxy-j7/j700t-development/recovery-twrp-v3-galaxy-j7-metropcs-t3427499
But once i reboot my phone i get stuck at the T-Mobile Splash Screen.
I have tried a number of things to root this phone and nothing works.
So my questions is this...... Is there or is there not any types of root for the
Galaxy J7 SM-J700T T-Mobile MM 6.0.1
Let me know
Click to expand...
Click to collapse
did you try an other kernel?
kalowas said:
did you try an other kernel?
Click to expand...
Click to collapse
Which kernel can i use
And when do i flash the kernel?
rinnycoop121 said:
Which kernel can i use
And when do i flash the kernel?
Click to expand...
Click to collapse
First ... did you follow these instructions?
Download the odin format recovery zip *
* Extract it *
* Enable oem unlock in the developer options *
* Enter download mode *
* Flash the extracted [recovery.tar.md5] file using odin *
kalowas said:
First ... did you follow these instructions?
9
Download the odin format recovery zip *
* Extract it *
* Enable oem unlock in the developer options *
* Enter download mode *
* Flash the extracted [recovery.tar.md5] file using odin *
Click to expand...
Click to collapse
Yes as of right now, i am on stock fiemware with TWRP Recovery installed.
As soon as i Try flashing SuperSU thats when i get stuck and tmobile boot Screen.
rinnycoop121 said:
Yes as of right now, i am on stock fiemware with TWRP Recovery installed.
As soon as i Try flashing SuperSU thats when i get stuck and tmobile boot Screen.
Click to expand...
Click to collapse
Warning : if it didn't work for you , you should use my kernel to get it to work
[http://forum.xda-developers.com/galaxy-j7/j700t-development/kernel-mina-kernel-v1-j700t-t3427446]
Did you try this already?
kalowas said:
Warning : if it didn't work for you , you should use my kernel to get it to work
[http://forum.xda-developers.com/galaxy-j7/j700t-development/kernel-mina-kernel-v1-j700t-t3427446]
Did you tryd this already?
Click to expand...
Click to collapse
It ia late here alreay 1:00am So i will give ot a try in the day time and post the results.
kalowas said:
Warning : if it didn't work for you , you should use my kernel to get it to work
[http://forum.xda-developers.com/galaxy-j7/j700t-development/kernel-mina-kernel-v1-j700t-t3427446]
Did you try this already?
Click to expand...
Click to collapse
Hey just did it and it worked thanks i have tried and tried and never got it.
Till now
Thanks, used odin and flashed Kernel then TWRP then booted into TWRP and flashed SuperSU and everythibg works perfect
rinnycoop121 said:
Hey just did it and it worked thanks i have tried and tried and never got it.
Till now
Thanks, used odin and flashed Kernel then TWRP then booted into TWRP and flashed SuperSU and everythibg works perfect
Click to expand...
Click to collapse
Awesome!!! Glad to help you...

[Rom] Tizen Rom V2.0 Nougat H850 20A OPEN EU Fast and Stable [03.12.2016]

Today, I shares my new rom to all of you. I hope you will enjoy with it
Changelog
- Base rom H850 20a OPEN EU
- Aroma Installer
- Debloat app System
- Set Wallpaper LG V20
- Set Lockscreens LG 20
- Add Dobly option in music setting
- Add Home UX4, with add widget on Smart bulletin
- Add Google Caculator in LG V20 rom
- Add LGEmail.apk
- Add LGTask.apk
- Transperant widget on Home UX5, UX4
- Navigation bar 32 height
- Sync Navigation and Status bar color system apps
- Add Smart Doctor
- Rooted after flash rom
- More.....
INSTALLATION GUIDE
- LGup for updated to Nougat 7.0
- Install TWRP Recovery 3.0.2.1 : TWRP (thanks @jcadduono)
- Download rom : https://drive.google.com/file/d/0Bxzxv3DgqkRbOFRnVmZNRU05Ym8/view?usp=sharing
MD5 : d11967d28e9f8e53d3f1c155bbe7d927
- Copy to Internal storage or ext sdcard
- Enter to recovery
- Install rom and follow steps in aroma installer
- Reboot
- Setup and Enjoy
Thanks :
- @jcadduono
- @superr for kitchen
Bonus : UI with power off screen (upper left), Screen capture (upper right) and center clock. Flash through recovery, no wipe :
https://drive.google.com/file/d/0Bxzxv3DgqkRbeWtXLVdtUWZlR1k/view?usp=sharing
Note :
- Sorry with my bad English
- I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
- Free for donate
Thanks All
You really made another thread just for an update you made on your ROM instead of updating this thread?
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336/
And i almost see no change in these two, except the base, and maybe some minor things...
problem after install...
Hello, I have a problem, after installing and restart always returns to TWRP recovery and does not start the rom. How can I solve it please? Thank you.
saitek59 said:
Hello, I have a problem, after installing and restart always returns to TWRP recovery and does not start the rom. How can I solve it please? Thank you.
Click to expand...
Click to collapse
Enter twrp recovery, mount, check system, data
And flash dm verify files
cdanthien said:
Enter twrp recovery, mount, check system, data
And flash dm verify files
Click to expand...
Click to collapse
thanks... the result is the same ... I even installed the another rom and the same thing happens ... after the LG image always comes back to TWRP...
saitek59 said:
thanks... the result is the same ... I even installed the another rom and the same thing happens ... after the LG image always comes back to TWRP...
Click to expand...
Click to collapse
backup your data in internal storage, copy rom to external card. enter TWRP recovery, mount, format data. Then flash dm-verify files. Reboot in recovery again, in mount, check tick system, data.
Now you can flash rom
great ROM. works perfect.:good:
cdanthien said:
backup your data in internal storage, copy rom to external card. enter TWRP recovery, mount, format data. Then flash dm-verify files. Reboot in recovery again, in mount, check tick system, data.
Now you can flash rom
Click to expand...
Click to collapse
I do not understand "Then flash dm-verify files"...
saitek59 said:
I do not understand "Then flash dm-verify files"...
Click to expand...
Click to collapse
flash SuperSU and should be the same
saitek59 said:
I do not understand "Then flash dm-verify files"...
Click to expand...
Click to collapse
Flash this file
https://idlekernel.com/fun-stuff-trust-me/no-verity-opt-encrypt.zip
cdanthien said:
Flash this file
https://idlekernel.com/fun-stuff-trust-me/no-verity-opt-encrypt.zip
Click to expand...
Click to collapse
Impossible ... everything installs well but on rebooting for the first time after installing the rom always comes back to twrp ... I do not know what I can do
solved, I have reinstalled the rom original and I started of 0 following the manual. Thanks to all and excellent rom.
saitek59 said:
Impossible ... everything installs well but on rebooting for the first time after installing the rom always comes back to twrp ... I do not know what I can do
Click to expand...
Click to collapse
I had a similar issue and had to LGUP a clean 20a, then root/install TWRP and now Tizen v2.0 running nicely - looks good and I like the transparent widgets on the homepage especially!
Gmobilize said:
You really made another thread just for an update you made on your ROM instead of updating this thread?
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336/
And i almost see no change in these two, except the base, and maybe some minor things...
Click to expand...
Click to collapse
Yeah, some people want the old version, some want the new. And CyanogenMod doesn't update an old thread whenever they update to a new version.
nima0003 said:
Yeah, some people want the old version, some want the new. And CyanogenMod doesn't update an old thread whenever they update to a new version.
Click to expand...
Click to collapse
I would understand, but it is barely an update, thats my point, with cm its done because of each ROM having different android versions, imo in this case ita quite pointless just to fill the dev section.
Gmobilize said:
I would understand, but it is barely an update, thats my point, with cm its done because of each ROM having different android versions, imo in this case ita quite pointless just to fill the dev section.
Click to expand...
Click to collapse
Yes, this ROM is based on Android 7 and the precious version was based on 6.
nima0003 said:
Yes, this ROM is based on Android 7 and the precious version was based on 6.
Click to expand...
Click to collapse
seriously i dont wanna get rude but wtf, where do you see android 6?
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336/
Do i have to Update to Nougat First over LG up when coming from genesis 1.3 marshmallow?
Our can I maybe just flash the New bootloader?
Gesendet von meinem LG-H850 mit Tapatalk
Rallyharry said:
Do i have to Update to Nougat First over LG up when coming from genesis 1.3 marshmallow?
Our can I maybe just flash the New bootloader?
Gesendet von meinem LG-H850 mit Tapatalk
Click to expand...
Click to collapse
flash new bootloader and modem first, then flash ROM
but I do suggest an update to N via LGUP first
Gmobilize said:
seriously i dont wanna get rude but wtf, where do you see android 6?
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336/
Click to expand...
Click to collapse
Oh, I never knew that existed, I was talking about the 6 version thread.

[EOL][ROM][Unofficial][Updated 05/05/2017][Stable] Lineage OS 13 for Lenovo A706

Lineage OS 13 ROM for Lenovo A706
Now experience the android marshmallow system with Lineage OS on lenovo A706.
Features :-
Latest 6.0.1 android system
December 1, 2016 security patch level (updated to February 2017 but not edited build.prop)
Split screen support
Better RAM management
Enhanced Doze mode for better batery life
Night mode as seen on pixel device
Cyanogenmod Theme Support
Higher Antutu Benchmark support
Supports Google Assistant
Stay in touch for the updates.
Code:
#include
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards
* or you getting angry because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Hello guys!
In this thread i'll present an new ROM for Lenovo A706 (armani_row). This is an unofficial build, so this not supported by Lineage OS team.
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
What is Lineage OS?
Cyanogenmod is dead, and its successor is Lineage OS.
What works:
1. Bluetooth
2. Camera
3. Sound
4. WiFi
5. GPS
6. Sensors(Proximity and GSensor)
7. Microphone
8. Speaker
9. Dolby System(When earphones plugged in)
What doesn't work:
1. Front Camera
Flash Instructions:
1. Download and flash Philz Touch Recovery.
2. Download the ROM and copy it to your SD Card.
3. Reboot your device into the Philz Touch Recovery(by pressing Power+Vol UP+Down buttons at the same time).
4. Wipe cache and Dalvik cache and then factory reset your device.
5. Navigate to your ROM file location and flash the rom.
6. Wait till the process completes.
7. Reboot your phone.
Enjoy!
Note: 1. Download and copy the boot.img file to the rom and then flash the rom.
2. It will take some time to startup the device around 15-20 minutes.
3. Don't panic if your device don't show the charging animation, just plug in your device to charger and it will start charging.
4. Don't update to CM 14.1 using the OTA updates (SYSTEM UPDATES).
Downloads​Lineage_OS_13_LenovoA706​Leave a thanks and donate me through bitcoins or paypal if you like my post.
My Bitcoin Address : 12TMugc324rru2Vz4tgGNZwYSxox94Vrtn
ENJOY!!!
Reserved
omkolte17 said:
Reserved
Click to expand...
Click to collapse
bootlop..
flash twice with twrp 2.8.1.0 stuck on logo and download it again still stuck.use philz same result.please fix it...
sorry for my english
irwan78 said:
flash twice with twrp 2.8.1.0 stuck on logo and download it again still stuck.use philz same result.please fix it...
sorry for my english
Click to expand...
Click to collapse
hi, I have found the issue and fixed it, file is being uploaded on drive and the link will be updated soon
omkolte17 said:
hi, I have found the issue and fixed it, file is being uploaded on drive and the link will be updated soon
Click to expand...
Click to collapse
thanks...back to cm11...
The bootloop issue has been solved but
Hi guys, the boot loop issue has been solved but it seems that there is one more issue which needs to be fixed and my exams are getting over on 25/03/2017 so you all have to wait till the exams get over then I'll fix the issue and develop more ROMs for lenovo a706 and u can also suggest me a few cool ROMs which I can develop for this device. Thanks for waiting...
My device: Lenovo A706 Xperia Arc S
lineage 14.11
This fix?
adul354 said:
This fix?
Click to expand...
Click to collapse
issue has been fixed download the new boot.img and add it to your downloaded rom file.:good: :laugh:
Bootlop
omkolte17 said:
issue has been fixed download the new boot.img and add it to your downloaded rom file.:good: :laugh:
Click to expand...
Click to collapse
Flashing by replacing boot.img is not working, still getting bootloop. Tried flashing a couple of time but could not proceed ahead of boot screen for hours. Kindly advise what can be done.
sickkid53 said:
Flashing by replacing boot.img is not working, still getting bootloop. Tried flashing a couple of time but could not proceed ahead of boot screen for hours. Kindly advise what can be done.
Click to expand...
Click to collapse
download the boot.img again its reuploaded. :good:
thanks for waiting
omkolte17 said:
Lineage OS 14.1 ROM for Lenovo A706
Click to expand...
Click to collapse
- FAKE !
It's not Lineage OS 14.1 . It's cm 11 .
I see it in buid.prop
Code:
ro.build.version.release=4.4.4
ro.build.display.id=cm_a706-userdebug 4.4.4 KTU84Q 4dbdb99056 test-keys
ro.build.fingerprint=dns/cm_a706/a706:4.4.4/KTU84Q/4dbdb99056:userdebug/test-keys
Vladden said:
- FAKE !
It's not Lineage OS 14.1 . It's cm 11 .
I see it in buid.prop
Code:
ro.build.version.release=4.4.4
ro.build.display.id=cm_a706-userdebug 4.4.4 KTU84Q 4dbdb99056 test-keys
ro.build.fingerprint=dns/cm_a706/a706:4.4.4/KTU84Q/4dbdb99056:userdebug/test-keys
Click to expand...
Click to collapse
It's not fake, it's Lineage OS 14.1 but just I used the build.prop of cm11 (i.e., it is a ported rom) :laugh:
Not booting
omkolte17 said:
download the boot.img again its reuploaded. :good:
thanks for waiting
Click to expand...
Click to collapse
After flashing by replacing with new boot.img file, when I select to boot the device, it shows the lenovo logo and automatically shuts down. Powering on the device gives the same result. I also tried to wipe cache/data after flashing the rom but to no avail. Kindly suggest solution for this.
Thanks for your hard work and patience
sickkid53 said:
After flashing by replacing with new boot.img file, when I select to boot the device, it shows the lenovo logo and automatically shuts down. Powering on the device gives the same result. I also tried to wipe cache/data after flashing the rom but to no avail. Kindly suggest solution for this.
Thanks for your hard work and patience
Click to expand...
Click to collapse
same result....when i plugin charge my phone always reboot again and again...
irwan78 said:
same result....when i plugin charge my phone always reboot again and again...
Click to expand...
Click to collapse
download the 3 lib files from the thread in downloads section then navigate to system>lib in the rom and overwrite the 3 files there and then flash the rom and even if it wont boot up then download the new boot.img from here and then try again. Even if it won't boot up then I have to start developing the rom from scratch and u all have to wait again .
Thanks for your co-operation:good: :laugh:
Link
I can't open link lib files,any another link
Link working
adul354 said:
I can't open link lib files,any another link
Click to expand...
Click to collapse
all links are working, u can try the link given below:
https://storage.googleapis.com/driv...29501f85-f20d-4e26-8992-c391734ab62f?authuser
omkolte17 said:
download the 3 lib files from the thread in downloads section then navigate to system>lib in the rom and overwrite the 3 files there and then flash the rom and even if it wont boot up then download the new boot.img from here and then try again. Even if it won't boot up then I have to start developing the rom from scratch and u all have to wait again .
Thanks for your co-operation:good: :laugh:
Click to expand...
Click to collapse
not working for me...use new lib file and new boot.img still bootlop.so what i must to do...?
irwan78 said:
not working for me...use new lib file and new boot.img still bootlop.so what i must to do...?
Click to expand...
Click to collapse
okay so now I need to develop the rom from scratch and that might require a few days. :good:

The Galaxy S9 And Plus Treble Discussion

The Galaxy S9 And Plus Treble Discussion
Great to see a treble sammy phone here
if any one booted head to the discussions down
There was one report of a user booting an S9 with the phh treble firmware. Apparently it run great for a completely unoptimised firmware
Sent from my SM-G965F using Tapatalk
Really really excited for this one ..
Jealous
I booted now AOSP 8.1 and an early lineage 15.1 build too.
iamnotkurtcobain said:
I booted now AOSP 8.1 and an early lineage 15.1 build too.
Click to expand...
Click to collapse
Any step by step how to install, or is it still in development? What is working on the rom? Thnx
dzontra83 said:
Any step by step how to install, or is it still in development? What is working on the rom? Thnx
Click to expand...
Click to collapse
Everything except all the samsungy tech such as iris scanner, double aperture thing and I believe it was auto brightness or something related to brightness slider.. Cmiw
Griffiths_Anna said:
Everything except all the samsungy tech such as iris scanner, double aperture thing and I believe it was auto brightness or something related to brightness slider.. Cmiw
Click to expand...
Click to collapse
Brightness slider bug is fixed. Just Fingerprint isn't 100% working atm.
iamnotkurtcobain said:
Brightness slider bug is fixed. Just Fingerprint isn't 100% working atm.
Click to expand...
Click to collapse
Any chance for a link, or a quick how to install guide
dzontra83 said:
Any chance for a link, or a quick how to install guide
Click to expand...
Click to collapse
How to flash:
- Obviously, unlock your bootloader
- Download the system.img on the first post
- Flash the system.img through twrp
- Do a Factory reset
- Reboot
Griffiths_Anna said:
How to flash:
- Obviously, unlock your bootloader
- Download the system.img on the first post
- Flash the system.img through twrp
- Do a Factory reset
- Reboot
Click to expand...
Click to collapse
There is nothing in the first post
dzontra83 said:
There is nothing in the first post
Click to expand...
Click to collapse
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Sorry wrong thread, didn't notice it
Choose the A only arm64
Any ideas why I can't flash system.img via twrp? It tells me I can't flash a system image to a file partition or something. I've had to use Odin to flash it by converting to a tar.md5
s3xxt0y said:
Any ideas why I can't flash system.img via twrp? It tells me I can't flash a system image to a file partition or something. I've had to use Odin to flash it by converting to a tar.md5
Click to expand...
Click to collapse
I also had the same issue with TWRP I flashed to stock with Odin since I was using a custom rom but I am in prenormal jail for 7 days if you figure it out please let me know.
I have the same problem. I am unable to update system.img. Is twrp while choosing system partition. Please help. I bit the big and rooted the device just to taste also.

[ROM][10.0] ZenX-OS 1.9 ‘v1.1’ by Aryan Sinha (An ASP)

[Highlights]
- Smoothest ROM ever Built for Redmi Go (Tiare)
- Performance Centric ROM
- If you are looking for a ROM with High Performance & Light Weight Gaming , This is for you
[Note]
- Your warranty is void now.
- I’m not responsible for thermonuclear war or any other Random ****s xD.
[Installation Procedure]
- Download ZenXOS.7z file & Patch
- Extract 7z file with help of ZArchiver App Or Any Other Software
- Now you have two Files : ROM & Patch
- Wipe Data, System, Dalvik & Cache
- Flash ROM.img as system image
- Flash Patch.zip
- Flash Webview Fix.zip
- Reboot
- (If Hang On BootAnimation then Press and Hold Power Key for 12 Seconds it will Boot)
[Download Link]
ROM:
https://drive.google.com/file/d/12hA3Cl-kKPS-5I-FD1cEGt4VcKhNQLT8/view?usp=drivesdk
Patch:
https://drive.google.com/file/d/1i3EInVgUutiPHmFG6Oi3W0tXPPwGmlvG/view?usp=drivesdk
Webview Fix:
https://drive.google.com/file/d/1amYZ0UXhPAUIOnPUZCN1XFNwz80thLu6/view?usp=drivesdk
Please press Thanks on my xda Thread
[ScreenShots] : Are attached below !
[Contact Me]
https://instagr.am/sinha.aryan03
https://t.me/TechyMinati
[Credits/Thanks]
@An ASP (Me) - ROM Developer
@oscarhc89 - For Testing
Hey, I haven't been able to boot the rom, I tried reformating the data partition, flashing it from recovery, but I always get stuck at the bootanimation (even after the forced reboot you suggested). Any ideas?
mateuxi said:
Hey, I haven't been able to boot the rom, I tried reformating the data partition, flashing it from recovery, but I always get stuck at the bootanimation (even after the forced reboot you suggested). Any ideas?
Click to expand...
Click to collapse
Just install stock firmware once via recovery, then flash as directed, it will boot. Please press thanks on the thread xD
does it have Gapps? or do we need to flash gapps?
Hello, first of all thank you for your work. It's nice to see than this old cheap phone can get an unnoficial A10. I've Flashed all the files as described in this guide, but stuck on three dots animation. How can I fix this? ?
edit: thanks to the ROM author for amazing support via Telegram. All solved, ROM works great! ?
does this zenosx have wps feature???
hey i m not so much old yet i need that RIP feature till android 8.1[last seen] . can ye confirm that wheather it has a 'WPS ' feature or not... i will be happy if its a +ve reply
TheFatality said:
does it have Gapps? or do we need to flash gapps?
Click to expand...
Click to collapse
No it do not have GApps
jerrry said:
Hello, first of all thank you for your work. It's nice to see than this old cheap phone can get an unnoficial A10. I've Flashed all the files as described in this guide, but stuck on three dots animation. How can I fix this?
edit: thanks to the ROM author for amazing support via Telegram. All solved, ROM works great!
Click to expand...
Click to collapse
Thanks for the feedback ! Btw More ROMs Coming Soon & We Already Booted Android 11 R
xdaguy.in said:
hey i m not so much old yet i need that RIP feature till android 8.1[last seen] . can ye confirm that wheather it has a 'WPS ' feature or not... i will be happy if its a +ve reply
Click to expand...
Click to collapse
Yes ROM Works fine.
Im having Encryption unsuccessful after flashing this rom, im pretty sure i followed the instructions
barumbads said:
Im having Encryption unsuccessful after flashing this rom, im pretty sure i followed the instructions
Click to expand...
Click to collapse
Hey you can contact us via telegram or you can flash as decrypt.zip to decrypt data.
Hello, I think the WebView fix patch is not the correct file? When I download it I get the Resurrection Remix patch. I think the filename may be mistaken. Please help to check!
https://drive.google.com/u/0/uc?id=1amYZ0UXhPAUIOnPUZCN1XFNwz80thLu6&export=download
I finally managed to boot it, first I formated system, data & both caches, then flashed latest miui.zip, then the .img, then the patch.zip (however it rebooted as it was flashing that zip, just got into twrp again and tried to flash the patch again), then the webview fix. AND finally, the decerypt.zip
Now I just need to test it.
does it have VoLTE support ?
mateuxi said:
Hey, I haven't been able to boot the rom, I tried reformating the data partition, flashing it from recovery, but I always get stuck at the bootanimation (even after the forced reboot you suggested). Any ideas?
Click to expand...
Click to collapse
did you fix this issue?
---------- Post added at 07:18 PM ---------- Previous post was at 07:16 PM ----------
mateuxi said:
I finally managed to boot it, first I formated system, data & both caches, then flashed latest miui.zip, then the .img, then the patch.zip (however it rebooted as it was flashing that zip, just got into twrp again and tried to flash the patch again), then the webview fix. AND finally, the decerypt.zip
Now I just need to test it.
Click to expand...
Click to collapse
did it boot? im stuck in bootloop

Categories

Resources