Problem fingerprint mi 10 pro - Xiaomi Mi 10 Pro Questions & Answers

With so many ROMs back and forth one new one the old one I discovered that the fingerprint doesn't work and I don't know how to fix it I've done two or three times fastboot rom and again it doesn't work if anyone knows let me tell you photos tell me what it can be and where i can find it

Anyone help ???

Related

soktkeys not working

I recently installed a new ROM and after a few minutes the capacitative touch keys on my phone stop working and I have to do a reboot is this most likely Rom related? because no one else posted having this problem. completely at a loss if anyone has had a similar experience let me know what you did to fix it.

[Q] Relay 4g proximity sensor fix?

Hello again everyone! Has anyone else had an issue during calls with the proximity sensor? When I take the phone away frorm my ear the screen does not away come back on.. I have googled it wihtout much luck. Does anyone know any tips to use to recalibrate it on cm11 with a relay 4g? The only thing I found was this link [I can't post links, but google 'calibrate proximity sensor android legend' should be 1st result] but towards the end the *#0*# dialer code used to test it doesnt work so im not sure if the fix will work or not. Since I expect all of you to be using your Relay 4g's as a phone, you guys must have done something. What do you all suggest? Thank you all for your help!!
Dominic
d4dd7wh0 said:
Hello again everyone! Has anyone else had an issue during calls with the proximity sensor? When I take the phone away frorm my ear the screen does not away come back on.. I have googled it wihtout much luck. Does anyone know any tips to use to recalibrate it on cm11 with a relay 4g? The only thing I found was this link [I can't post links, but google 'calibrate proximity sensor android legend' should be 1st result] but towards the end the *#0*# dialer code used to test it doesnt work so im not sure if the fix will work or not. Since I expect all of you to be using your Relay 4g's as a phone, you guys must have done something. What do you all suggest? Thank you all for your help!!
Dominic
Click to expand...
Click to collapse
is it doing it for you in any rom or just one rom in particular?
REV3NT3CH said:
is it doing it for you in any rom or just one rom in particular?
Click to expand...
Click to collapse
CM11-M3 is the only one I've had the issue with.. It's happened during the day, but I spoke to my wife on the phone tonight and outside at night it worked fine. I have been using this rom for 2days so far and i dont make too many phone calls, but its happened roughy half the time..
d4dd7wh0 said:
CM11-M3 is the only one I've had the issue with.. It's happened during the day, but I spoke to my wife on the phone tonight and outside at night it worked fine. I have been using this rom for 2days so far and i dont make too many phone calls, but its happened roughy half the time..
Click to expand...
Click to collapse
ok that ensures its the Rom and not hardware...ill lok into it a bit more but its an issue in hex coding within /system/lib/hw/ and was built with this issue from source....had this issue on my last device and was fixed

[Q] Nexus 5 Camera wobble

I need help with my nexus 5 camera. Couple of weeks ago my camera started "wobbeling" dont know how it happend. I tried factory reset and flashing other ROM's but it won't work. Have anyone the same problem or know how to fix this? Can't poste a link to show you because im a new member.

So, I got my Poco today. I guess discussion thread.

Hello to the Poco forum, got my device today, I was pretty excited I must say.
I'm currently waiting for the 72h to pass to unlock the bootloader of my device.
I only have one issue I would like to comment on, I noticed the touch input is weird on this device.
Read a lot of threads that poco has touch issues, some agreed on that, some disagreed, but to me I can definitely see the issue coming from a ZTE Axon 7 which touch wise was perfect.
The question is, can this issue be fixed somehow?
Either a custom rom kernel or setting?
Or just pray that Xiaomi will address this?
Thanks anyone for your input. (lol)
Pretty sure its kernel (software) related but there is no fix for the moment, xiaomi has notified they will fix this in next releases. Lets hope
I got sometimes a full freeze of the screen for 3 seconds, even in twrp
Just install miui 10 beta or AOSP or LOS and you won't find any touch issues nor screen freez
Sent from my POCOPHONE F1 using Tapatalk
Thanks for both of your answers, only thing left is wait then.

Sometimes touch is unresponsive

When I press something quickly and not so hard, touch doesn't get recognized. For example when I type in 4 PIN on a lockscreen 1 or even 2 out of 4 touches may not be recognized.
Apps, keyboard - everything has this issue.
Im now trying through different ROMs, official releases and etc to find most stable version of MIUI.
I really hope this is not hardware issue :/ Is there any way to calibrate touchscreen tho?
Does anyone experience same problem? It takes place only when I press not to hard on screen and quickly.
I haven't seen this problem, but I remember having an issue with a recent Motorola phone I tried for work. Removing the screen protector fixed it in that case.
Sent from my Mi MIX 3 using Tapatalk
PWn3R said:
I haven't seen this problem, but I remember having an issue with a recent Motorola phone I tried for work. Removing the screen protector fixed it in that case.
Sent from my Mi MIX 3 using Tapatalk
Click to expand...
Click to collapse
I dont use screen protector yet, stores in my country still don't have them :d
SO I just noticed that problems are gone while I'm in TWRP. Keyboard is dream-like responsive, no random un-responses when I press to quickly and softly. It still recognizes a touch like a charm.
I guess its MIUI than?
They probably means it's kernel/touch driver related. If you have unlocked bootloader you could try the custom kernel. As always be sure it works for the rom version you are on and that you follow directions.
Sent from my Mi MIX 3 using Tapatalk
I have the opposite problem to this! If anything my screen is too sensitive, I have to be really careful lifting it or putting it down with the screen on, despite it not being a totally edge-to-edge display (which is one of the reasons I didn't buy a Mate 20 Pro, edge-to-edge looks great, but it's a pain in day-to-day use).
Well this is getting deal breaker for me. Touch is annoyingly unresponsive on latest stable build. Also on latest Beta build.
Does anyone experience same problem? please respond.
Dathrex said:
Well this is getting deal breaker for me. Touch is annoyingly unresponsive on latest stable build. Also on latest Beta build.
Does anyone experience same problem? please respond.
Click to expand...
Click to collapse
You got a lemon, this thing is one of the most responsive screens I've ever used. I have an essential phone so I know how bad it must be for you, the touch response on those is the worst I've ever experienced by far.
Dathrex said:
Well this is getting deal breaker for me. Touch is annoyingly unresponsive on latest stable build. Also on latest Beta build.
Does anyone experience same problem? please respond.
Click to expand...
Click to collapse
Depending where you bought it and what ROM you have I'd advise to download a ROM and purge the ROM now because if you are saying that the touch problem is in MIUI something is not right. Just wipe the phone and fastboot new ROM. If this does not fix problem RETURN IT FOR NEW ONE.
Can this happen because of unlocked bootloader?
Dathrex said:
Can this happen because of unlocked bootloader?
Click to expand...
Click to collapse
No.
You are not crazy dude.
Same here.
bought today the European version and, in the first Google wizard, touch was unresponsive for, for example, the next button.
Now I don't have any issue.
So, you are not crazy.
Ps
And no: I'm locked.
Same problem here...
Mine was totally fine, really responsive and nice, up until I installed the MIUI 10.2 Global and now it's ****. Seems to be especially bad in the lower right corner. Seems to be software triggered...
My CN version running Xiaomi.EU rom has no problems with the touch screen or touch sensitivity, been running fine for the past 2 months or so. Also have tried on multiple roms (stock CN rom, CN developer rom, global rom).
Sounds like an issue with the EU/Global version?
I'm on Global ROM and facing same issue.
Same issue here with 256/8GB CN device, I unlocked the phone as soon as I got it and installed Global 10.0.11.0 on it. The touch issue happened when I updated the phone to 10.2 first via the updater. Then i thought it was an issue with dirty flash so I wiped everything via TWRP and did a clean flash. Still the same issue, i even tried the 10.2 EU rom. For now I went back to 10.0.11.0 and there's 0 touch issue.
I have the same issue, is it a software or a hardware issue ??
Was this solved by now or is it still an issue? I'm planning on buying a Mix 3 and this would be deal breaker for me.
Calmasis said:
Was this solved by now or is it still an issue? I'm planning on buying a Mix 3 and this would be deal breaker for me.
Click to expand...
Click to collapse
I think it was extremely rare if you read all the posts I don't think many members experienced the issue
954wrecker said:
I think it was extremely rare if you read all the posts I don't think many members experienced the issue
Click to expand...
Click to collapse
Well I was kinda worried because I saw 2 topics about this, this is the other one: https://forum.xda-developers.com/mi-mix-3/help/touchscreen-sensitivity-t3896796
Thank you for your reply.

Categories

Resources