Bootloop ... fail to flash with Odin .. please help - Samsung Galaxy S8+ Questions & Answers

Hello people.
Another bootloop .. I'm sure it's the thousandth post about this problem .. but there ... I don't find myself anymore. Sorry for the rehearsal.
I detail:
I have a Galaxy S8 + (that of a friend) which remains blocked on the first screen .. so in bootloop. According to him it happened after an update attempt.
I tried all the attempts with Odin which all ended in failure (FAIL) with different BLs, some of which were old ... in short, I have a hard time.
I tried to follow the video which deals with this problem and how to get around Odin's failure .. nothing to do .. I couldn't do it.
So if you will be kind enough to help me get the phone back, I will be grateful.
To know that it is a model: g955nksu3dse2 therefore under android 9 Pie.
I’ll put a picture of what’s on the screen when I want to flash the BL for information
Thanks again.

Related

[Q] i have a serious problem

Dear Sir
iam changing my phone sim 3times continue.
after that iam restarting my phone.
buy my phone hanged at samsung first screen,
after i am updating firm ware using odin.
but my phone not turn on.that is sucked at android factory reset window.
the error is cant unmount sdcard...etc
my phone model is samsung si9003
plz can you help me about my phone how to turn on as usual.
plz suggest me about upgrading.
or give any solution for me plz
phone help
dnchandana said:
Dear Sir
iam changing my phone sim 3times continue.
after that iam restarting my phone.
buy my phone hanged at samsung first screen,
after i am updating firm ware using odin.
but my phone not turn on.that is sucked at android factory reset window.
the error is cant unmount sdcard...etc
my phone model is samsung si9003
plz can you help me about my phone how to turn on as usual.
plz suggest me about upgrading.
or give any solution for me plz
Click to expand...
Click to collapse
It is very hard to understand what your exact problem is, I can suggest a Galaxy III for an upgrade. As far as your current phone...
I;m sure someone out there has had a problem close to yours, try YouTube and Google searching as well as educating yourself here (XDA) on anything related to your phone or similar problems.
You might find the info. you need in an unrelated post or video! Check your pins to see if they are worn or possibly broken (connections). Ensure that you are getting a clean and solid connection.
Good luck

[Q] Bricked SCH-I925

Hi All, I have bricked my SCH-I925 (Verizon) And need some help.
What I have done so far:
I unlocked the bootloader with the tool from AdamOutler
http://forum.xda-developers.com/showthread.php?p=41016954
It workt just fine, but after a wile I tried to do a factory reset. After that it was not booting anymore and always ended up in TWRP.
I then decided to do a system repair to factory rom with the Verizon tool, This went wrong and now it is not booting anymore. I can enter ODIN mode but it will not accept any roms, Also the Verizon repair tool is not able to load the factory rom and get stuck on 83% falling back to 66% with the message the device is unexpectedly disconnected.
What I have now is the unencrypted factory rom grabed it from the Verizon tool when it was trying to write it to the device. And a Unit that will not accept any writing of roms.
Does anyone know how to resolve this problem?
I also have access to a RIFF-Box and second working SCH-I925 but unfortunately no info about the JTAG pinout of the device.
hope to help
Hi, I've looking for the tool CASUAL(R478b) everywhere , but I can't find it anymore ,the link has expired. Can you share it to me please. Thank you very much!!!!
Or ,you can email it to me :
[email protected]
Thank you again!
Not sure who you are asking as OP was seven years ago .
Posted an email is liable to get a flood of spam .

[Completed] Help saving my Sonim XP7

Hey guys, I've been attempting to root my Sonim XP7 and everything seemed to be going well until I rebooted a couple days ago, now it is stuck at the sonim boot logo. I've tried wiping and factory resetting it from recovery and it gives a successful data wipe message but continues to get stuck at the boot scree. I have no idea what to do. I imagine I already lost all data on the phone but i'd really like to get this phone working again. Can anyone guide me? Thank you
Hi !
Unfortunately I couldn`t find anything helpfull for you here on XDA , next time you must search deeper before proceeding to modify your device , confirmed tools must be considered
Now , the only thing I can suggest is to either contact the seller or the manufacturer in order to get it back on track .
Good luck !

boot loop and other problems

Hey there,
I have complicated problem here ,
Model : Gt-P5100 samsung galaxy 2 10.1 (16gb)
ROM: Stock 4.2.2
main problem : Boot-Loop
__________
for some reason , the device is stuck in a boot loop , i have managed that problem 4 monthes ago by falshing stock rom
But Now , it didn't work, nor any other method mentioned here or any forum !!
1-Tried to flah Stock ---- didn't work
2-another stock ---didn't work
3-changed the version of stock ----didn't work
4-changed odin version ---didn't work
( i have also problem getting into download mode by key combo , so i used 300k tool !! , and recovery shows a dead android and wipe cache option gives an error !!)
throughout flashing , it gives at the middle of the process red "FAIL!" , with log error below nand start sh** , complete(write) operation failure !
after taking 40 minutes approximately !!
_____
5- I flashed a PIT , with a success , boot loop still there
6- I flashed recoveries , which didn't change the recovery i have with the dead android and error and e3 !!
7-I got black screen and tablet wouldn't turn on or charge anymore ( I think i forgot it in downlod mode untill full discharge !!)
8- I have opened it and removed the black cable of power and while it was in adaptor , that thing weirdly worked !!
9- But i still in boot-loop !!
10- I've used Cygwin to turn the rom into seperate "TARS" so i can flash them seperately with the right order >
11-as i remember flash sbl,boot modem ,recovery ,cache ,,,all success !!
12-getting to system.tar it took along time , and it has the failed with the same error write failed !!!!
____________________________
now i think technically every software problem has some solution , but what i have missed , any other solution or advice ??
please help , i don't see my stuff bricked without a fix
i don't know the main reason for that problem , i mean it may be due to some application which "obviously" cannot delete it , and ofcourse because i have let the tab for my young brother
sorry for inconvenience and my bad English too
ANYHELP ???????????
diabycool said:
Hey there,
I have complicated problem here ,
Model : Gt-P5100 samsung galaxy 2 10.1 (16gb)
ROM: Stock 4.2.2
main problem : Boot-Loop
__________
for some reason , the device is stuck in a boot loop , i have managed that problem 4 monthes ago by falshing stock rom
But Now , it didn't work, nor any other method mentioned here or any forum !!
1-Tried to flah Stock ---- didn't work
2-another stock ---didn't work
3-changed the version of stock ----didn't work
4-changed odin version ---didn't work
( i have also problem getting into download mode by key combo , so i used 300k tool !! , and recovery shows a dead android and wipe cache option gives an error !!)
throughout flashing , it gives at the middle of the process red "FAIL!" , with log error below nand start sh** , complete(write) operation failure !
after taking 40 minutes approximately !!
_____
5- I flashed a PIT , with a success , boot loop still there
6- I flashed recoveries , which didn't change the recovery i have with the dead android and error and e3 !!
7-I got black screen and tablet wouldn't turn on or charge anymore ( I think i forgot it in downlod mode untill full discharge !!)
8- I have opened it and removed the black cable of power and while it was in adaptor , that thing weirdly worked !!
9- But i still in boot-loop !!
10- I've used Cygwin to turn the rom into seperate "TARS" so i can flash them seperately with the right order >
11-as i remember flash sbl,boot modem ,recovery ,cache ,,,all success !!
12-getting to system.tar it took along time , and it has the failed with the same error write failed !!!!
____________________________
now i think technically every software problem has some solution , but what i have missed , any other solution or advice ??
please help , i don't see my stuff bricked without a fix
Click to expand...
Click to collapse
I can't change my rom, wipe / format doesn't work. Nothing changed after flashing with Odin.
16 GB Tab 2 have a known faulty EMMC (MAG2GA). It can happen, that your EMMC get "read only", so you can't perform any write actions (also you can't format) anymore.
From the EMMC data sheet:
5.1.7 End of Life Management:
The end of device life time is defined when there is no more available reserved block for bad block management in the device. When the device reaches to end of its life time, device shall change its state to permanent write protection state. In this case, write operation is not allowed any more but read operation are still allowed.
But, reliability of the operation can not be guaranteed after end of life.
On a faulty EMMC firmware it happens a lot faster.
What are the symptoms?
Uninstalled apps and deleted files are back after a reboot
Formating the storage doesn't work (after reboot the old rom and apps are back)
You can flash whatever you like via Odin - it showes "passed" but after reboot nothing changed (e.g. still no StockRom or still the old Recovery you had previously installed)
... there might be some more, but only to mention some ...
In most cases, the issue can be fixed by a EMMC firmware update, but you need someone who's able to do it (possible via ISP, nothing you can do esylie at home yourself). In some bad cases you need to find someone who can replace your EMMC.
source: andi34.github.io

Samsung j4 SM-J400F on opening it stop on black screen, and Keeping vibrating each second

Welcome...
Please I need help to fix this problem quickly, I am tired of searching for the solution and I hope to find the solution here.
This happened after i flashed wrong TWRP File it was for j4+ Not for my device.
Thank you all in advance
I have experienced the same thing before... I wipe my phone first and then run the twrp of my phone model and then it was fixed... You can try this first..

Categories

Resources