Database Info

[DEV] Voodoo Sound for Transformer v1 for 3.0.1, 3.1. Feature requests and discussion

Hi everyone!
Asus EeePad Transformer hosts a very nice audio codec by Wolfson that powers both the headphone and speaker output.
Its the ultra low power WM8903, implementing a midrange DAC (Wolfson-scale) that outputs a clean and musical signal, and my favorite Class W headphone amp, that gives a clean controlled and accurate output, and is able to drive full-size 300 Ohms headphones without distortion.
The transformer audio power stage is not as powerful as other device I tune so at maximum volume but I'm sure you'll be surprised by the capability of this amp if you compare it to any other mobile non-Voodoo device.
I might limit the maximum gain to +3dB to avoid saturation.
Voodoo sound is:
A control Android application
- Free version (semi broken on Honeycomb ATM, will fix soon): https://market.android.com/details?id=org.projectvoodoo.controlapp
- Plus/Donate version: https://market.android.com/details?id=org.projectvoodoo.controlappdonate
Plus version gives the ability to get full Voodoo sound implementation without depending on a custom kernel. Root is required to load the additional driver.
Free version requires a kernel implementing Voodoo sound GPL patches as you'll find plenty on XDA.
Features of the v1 :
I'll be very accurate and describe the exact change so far.
As usual, you get what you see.
What Voodoo sound driver v1 does on transformer is mapping volume to the headphone amplifier hardware control.
In the standard configuration, here is how it works: Most time only half or less of the Dynamic Range of the DAC is used (depending on the current output volume) by trimming the signal amplitude in a digital way.
What brings the driver v1 is a maximization of the digital volume, so the system works really on 16bit instead of 12 or even less at low volumes. And instead of that you control directly the analog gain of the Class W headphone amplifier built in the codec.
It allows to get more powerful sound, like to drive full-size high-impedance headphones at desired volumes, but for most people using sensitive headphones (same for in-ear) the sound is improved because there's far less hiss by reducing the analog gain.
When you reduce the noise level, the sound is more clear and defined.
I have some more leads in development for this codec, like:
- better oversampling quality (128x oversampling, require also clock reconfiguration on the SoC)
- alternative digital filter to reduce the very high frequency intensity ( > 20kHz) in order to reduce the listening fatigue.
WM8903 doesn't support digital effects like parametric EQ or 3D effect so I won't be able to activate that, but there's still some headroom to improve the quality and neutrality of the response, audiophile-style
Here are measurements I made without any modification, on 3.1:
http://supercurio.project-voodoo.org/audio/eeepadtransformer/Asus EeePad Transformer Android 3_1.htm
Click to expand...
Click to collapse
Planned features
- Better SRS presets for the speakers
- Maybe some volume boost for speakers if possible with reasonable quality.
- If usable and providing sufficient quality: customizable EQ & 3D effect using SRS software engine for the Headphone out.

Screenshot of the first version, thanks jjsoviet
jjsoviet said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse

this looks great.

SO its a better sound driver so to speak?

Digiguest said:
SO its a better sound driver so to speak?
Click to expand...
Click to collapse
Eyup.
Actually, it pains me to know that my Transformer now beats the crap out of my Zune HD in some areas, like soundstage and overall dynamics. Whatever voodoo hoodoo shmoodoo Supercurio's cooking on his kernel kitchen, I love it.

Digiguest said:
SO its a better sound driver so to speak?
Click to expand...
Click to collapse
Yes its an additional driver built around the existing one in order to use the audio hardware in the optimal way.
Most manufacturer are happy enough when their device output sounds, but in many case the result can be improved, sometimes vastly.
And I must say.. its particularly interesting when the audio hardware is made by Wolfson, because you know the result can probably reach audiophile-quality levels!

Will this also help the tf's speakers? I've beem ok wirh the headphones but not the speakers.
Sent from my Transformer TF101 using XDA Premium App

It says the free version is not compatible...

chatch15117 said:
It says the free version is not compatible...
Click to expand...
Click to collapse
Free version requires a custom kernel implementing Voodoo patches.
The first custom Kernel supporting Voodoo sound is this one, by Clemsyn! http://forum.xda-developers.com/showthread.php?t=1109630
As stated in the description today the free App is semi broken (the manual volume slider crashes on Honeycomb, but the volume key mapping works)
I'm working on an update ATM.

supercurio said:
Free version requires a custom kernel implementing Voodoo patches.
The first custom Kernel supporting Voodoo sound is this one, by Clemsyn! http://forum.xda-developers.com/showthread.php?t=1109630
As stated in the description today the free App is semi broken (the manual volume slider crashes on Honeycomb, but the volume key mapping works)
I'm working on an update ATM.
Click to expand...
Click to collapse
Also say incompatible with the custom kernel installed.
Sent from my Transformer TF101 using Tapatalk

danielsjam said:
Also say incompatible with the custom kernel installed.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Voodoo Control 1.0.7 finds the driver here: http://twitpic.com/5ei07e (only the volume key mapping works ATM)
If it's not detected it means your kernel actually running doesn't implement Voodoo Sound.
Note: Clemsyn published the kernel very recently!

Just tried your apk and it's pretty impressive, sound is clearer and cripspier when I play dungeon defenders with my kids and it seems louder than the Gtab now. Didn't even think my transformer will sound like this

supercurio said:
Free version requires a custom kernel implementing Voodoo patches.
The first custom Kernel supporting Voodoo sound is this one, by Clemsyn! http://forum.xda-developers.com/showthread.php?t=1109630
As stated in the description today the free App is semi broken (the manual volume slider crashes on Honeycomb, but the volume key mapping works)
I'm working on an update ATM.
Click to expand...
Click to collapse
I understand, I'll wait for one that says compatible. I've got the kernel - in fact clemsyn is hosting it on my server

clemsyn said:
Just tried your apk and it's pretty impressive, sound is clearer and cripspier when I play dungeon defenders with my kids and it seems louder than the Gtab now. Didn't even think my transformer will sound like this
Click to expand...
Click to collapse
Thanks.
You're talking about the headphone output right?
Because the speaker output is not (yet) affected. I hate to contradict people hearing improvements but I must sometime by integrity

Just dl'd the free version from the market to run with Clemsyns kernel and it seems to be working nicely. Thank you very much for the hard work.
Couple of requests would be:
1. Mic gain control
2. The stock music player always pauses when the screen is off. When using headphones you can hear what sounds like the headphone feed being turned off...

supercurio said:
Thanks.
I hate to contradict people hearing improvements but I must sometime by integrity
Click to expand...
Click to collapse
The Power of Suggestion is a powerful tool. Use it WISELY! LOL!!!!

Hey SC,
First, awesome job on getting this to Tf (bought the donate app awhile back for my Galaxy S, and now you're making me ha ppy with Tf).
Main feature request from my side would be mic sensitivity, this time the other way around was too sensitive on galaxys, needs pumping on tf. Also, if anything could be done to the internal mic quality on software level, would be awesome.
Thanks!
On a side note, I was sure i heard an improvement with speakers after installing control app, but that might be placebo effect.

carrera0to60 said:
2. The stock music player always pauses when the screen is off. When using headphones you can hear what sounds like the headphone feed being turned off...
Click to expand...
Click to collapse
This is the one thing I don't get it. Why does the sound stop after the screen goes off?
i

jwilliamf said:
This is the one thing I don't get it. Why does the sound stop after the screen goes off?
Click to expand...
Click to collapse
That's obviously a very lame bug from ASUS :/

GwynBleidd said:
Hey SC,
First, awesome job on getting this to Tf (bought the donate app awhile back for my Galaxy S, and now you're making me ha ppy with Tf).
Main feature request from my side would be mic sensitivity, this time the other way around was too sensitive on galaxys, needs pumping on tf. Also, if anything could be done to the internal mic quality on software level, would be awesome.
Thanks!
Click to expand...
Click to collapse
You're welcome!
Okay I'll take a look.
I'm already experimenting with Speakers ATM, messing with registers.
It seems its possible to boost a little bit the speaker output, but really only "a little bit": +2dB
I doubt anybody will notice, but it's still better than nothing.
GwynBleidd said:
Hey SC,
On a side note, I was sure i heard an improvement with speakers after installing control app, but that might be placebo effect.
Click to expand...
Click to collapse
Yup, placebo

[APP][2.3-4.1 and 4.4+] SpeakerBoost

Speaker Boost boosts speaker volume on Android 2.3-4.1 and 4.4+. (It doesn't work on 4.2 and 4.3.)
There are other apps that do this, and do more (equalizer support, virtualizer, etc.), but this is meant to be a very light-weight free app (~43K as of 1.01) just to boost the volume and nothing more.
You can pop it up at any time you like just by holding down the search key, which may be handy, or by using the notification bar.
By default it puts up both a volume slider and a boost slider, which is handy for devices without volume buttons, but you can remove the volume slider (menu | settings).
Free version: Google Play (no ads)
Donation version: Google Play (identical to free version, but supports developer)
Source code is available, BSD licensed.

I completely removed the ad in 1.03. You can get it in the Market or at code.google.com/p/speakerboost

I'll give it a shot today.
Thanks

I posted a new version in the Market. In the Settings, you can now set a limit to how high you want to allow the boost to go.
By the way, this really is USE AT YOUR OWN RISK software. Based on reviews, one user blew out earphones and two damaged their phones: this can make the sound really loud, and you need to use it responsibly. My rule of thumb--and I don't know how reliable it is--is that if you hear audio distortion, you should immediately crank it down.

After using Speaker Boost, the app displays in the task switcher in Android. Is it possible to disable displaying the app in the task switcher?
---
Sent from my Transformer Prime TF201

arpruss said:
I posted a new version in the Market. In the Settings, you can now set a limit to how high you want to allow the boost to go.
By the way, this really is USE AT YOUR OWN RISK software. Based on reviews, one user blew out earphones and two damaged their phones: this can make the sound really loud, and you need to use it responsibly. My rule of thumb--and I don't know how reliable it is--is that if you hear audio distortion, you should immediately crank it down.
Click to expand...
Click to collapse
Used it on your own risk
I test it on my Samsung Note Build ..very useful thanks for sharing this app . The best booting volume app ever..keep up the good work bro .

It's looking like this doesn't work with the stock music player on Samsung devices (that music player has its own equalizer settings that can be used to boost audio, and I can't override them--the API says that I've got control over the equalizer, but the volume doesn't change up or down). Does it work with the stock music player on non-Samsung devices? (The music player on Samsung Android 2.3 devices is different from the music player in the Android 2.3 sources.)

I have some users writing reviews that say that the current version doesn't work on devices the previous version worked on. Anybody here see this?

SpeakerBoost is back! While Google eviscerated the API that I was previously using for boosting, in 4.4 they introduced the LoudnessEnhancer effect, and so SpeakerBoost should once again work.

There is now a $0.99 Donate version if you want to support the developer.

I just uploaded new versions with nicer notification icons.

Does this work on lollipop and can this increase the phonecall volume?
By the way, i an using Asus zenfone5 with resurrection remix rom.

Just a quick note that I've just sold the app to Prometheus Interactive. I have good reason to hope they will develop the app in good ways, but I won't be developing it further myself.

Does it have support for Nougat?

EXCELLENT! Still works on my Note 8 and 9!

[APP][11/10 UPDATE] NOOZY audio player + Noozxoide EIZO-rewire™ PRO

hey all!
i am not the developer of the app,but i saw a lot of requests on the forums from buddies who couln't download it from market,so i thought to make a thread about it and make the apk available here :victory:
lately i came in contact with the devs,so you can consider this the official channel when you want to know about dev feedback.
in my opinion Noozy it's the best audio player on the market when it comes to audio quality.
since i am a sound designer,i care a lot about this aspect and i am happy to help spread the word about this great piece of software.
NOOZY audio player
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
Designed to enhance the listening experience for the on-the-go audiophile. The "noozy" features a premium audio player that lets you experience the best possible sound quality from your music library and favorite Internet radio stations.
"noozy Studio 3" is an ultimate better richer and more interactive media player for Android let you to manage your entertainment contents such Music, Videos, Podcasts and Live Broadcasts. Envy with its sleek and fluid-alike navigation, all you need to do is use your finger to Swipe Left or Right and, Tap or Hold operations.
“Similar Network" online service finds you the relevant albums and genres when you are listening to an album or track. “Similar” also helps you to discover new music you never knew. Listen to the 10 seconds sample track and get album from the nearest store.
Get album reviews, artist biographies, top tracks, playlists, related artists and podcasts (audio/video) all in one place. “noozy” Server has about 1000+ 3rd-party connections world wide. This Server allows you to browse tracks by an artist in the library, read biographical information, view and buy other albums related to the artist, view artists similar to any artist based on the genre, and then view music charts information.
Build-in “noozy LIVE!” allows you to listening to more than 1000+ of your favorite genres available, add your favorite Podcasts and enjoy the superb audio experience. “noozy” is the beginning to the end of the boring media players…
“noozy” will paused and resume the track playback automatically when connecting or disconnecting the audio jack. You can also add “noozy” remote controls at your home screen.
AUDIO PROCESSING FEATURES
Noozxoide Balanced X-EQ™ Processor
(Deliver balanced soundstage for each channels on the content.)
Noozxoide MaxxBass™ Processor
(Delivers the premium deeper 1 octave bassline.)
Noozxoide NogicQ™ Processor
(Delivers higher vocal definition and warm audio.)
Noozoxide Psychoacoustic II™ Processor
(Increase the speaker size and added warm attack effect on the content.)
Noozxoide LogicSurround ES™ Processor
(Create virtual surround sound for headphone or practical speakers and widen the soundstage.)
SUPPORTED FILE FORMATS
Audio: WMA, MP3, OGG
Video: MPEG, MPG, MP2, VOB, DTS, ASX, WAX, ASF, WM, WMV, AVI, D2V, MP4
MORE:
if you are on ICS 4.0.3 and up,you may want to trash your DSP manager and try Noozxoide EIZO-rewire™ PRO for further enhanced system sound experience.
BE SURE TO DISABLE ANY OTHER DSP MANAGER
grab the apk down here (thanks to Nick Fury for providing the apk)
(click to enlarge)
COMPATIBILITY/STABILITY ISSUES
DO NOT USE 3rd PARTY EQUALIZER APPS: WILL CAUSE DISTORTION AND CONFLICT WITH NOOZY AUDIO TECHNOLOGIES
For people who uses VOODOO SOUND:
to keep the awesome Voodoo enhancements just be sure to keep OFF the Noozxoide Psychoacustic Processor
For people who are experiencing crashes/force closes:
try to increase the dalvik.vm.heapsize in your build.prop
DEV FEEDBACK ABOUT COMMON ISSUES/FIXES:
## APK size
I’ve read the threads at the XDA forum, people curious about the noozy apk file size looking different from Google Play, whether after installed or extracted. It is a compressed archive with obfuscated content. Some people gets 4MB, 5Mb, 6MB more or less, noozy extracts itself some of its important components to use on RAM, apk becomes bigger due to noozy extracting the necessary firmware files from embedded sound chip and store it inside noozy apk for faster process. “noozy” actually relies on stock libs,works as a basic interpreter when emu starts and so you get sound altered by noozy. Thing happens basically like a PlayStation 2 emulator.
## If I push the eq button noozy crashes and restarts
No matter how heavily modded your Android is or if you keep flashing different new sound libraries, noozy will crash all the time due to the emulation failed to work properly.
## It crashed after about 45 minutes playing and android did not showed any warning at all, no pop-up window stating the app was stopped/FC
To run an emu on Android is a challenge, everything is just experimental. When noozy tries to get higher priority negotiating the root audio, if it fails, the whole playback process will just halt. We haven't put a warning message yet, so we put a threshold to prevent your phone going on mute forever until you reboot. So we just try to make something work.
## Everytime that i hit music it FC. Movies works well.
To be frank, noozy is a very basic player with several basic decoders, when noozy finds music files and search for the exact folder ([emmc]mnt/sdcard/music) and finds a music format that is not supported it will just fail (eg .flac format).
## While I play a file with the app in foreground, no problem; if I set it to background, for example i start browser, it continues playing, but after some seconds it stops.
Noozy + noozxoide + soundxemu consume a lot of CPU and RAM. It reaches 30-70MB or more. When the resources are not sufficient,noozy or noozxoide will cut itself and stop everything.
##UI and updates
Regarding to the UI experience, we will fix it as soon as possible, but the audio comes first. Noozy updates will end soon enough after the UI is good. There are also new things in the work related to Noozxoide Labs and Android. We will release the full sound-processor-based, no EQ, no conventional parametric filters. Hope we are not alienating users.
UPDATE 3.0.2.3 [11/10/2012]
- Fixed major bugs (lockscreen)
- Improved & reduced SoundXEMU-ALSA-SPU interpreter keep busying.
- Improved with higher priority on bypassing root-audio-effect and DRC (Dynamic-Range-Compressor) in order to get pure playback from the source keeps away loudness-war. (respect!!!)
- Added algorithm on Acoustic processing for higher vocal definition, and natural warm audio.
- 24bit(float) high-depth precision processing to for clarity and stunning audio.
grab it down here
(i reordered the files,i'll keep also old versions up,just in case)
!!! IMPORTANT !!!
If you have an issue/bug,please submit in this thread detailed infos about your PHONE and ROM,
so the devs will be able to check and fix things properly.
follow this form:
Issue: Noozxoide EIZO-rewire/Noozy keeps FC
Phone Model: GT I9100
ROM: stock 4.0.3
CREDITS:
developer website: http://dogsbark.net/portfolio/noozy-media-player-library
play store: https://play.google.com/store/apps/developer?id=dogsbark
Nick Fury for the EIZO rewire apk
enjoy

Just what I've been looking for:thumbup:
Edit: live audio sounds great but it won't seem to recognize ANY of my music (mp3's). It does however seem to recognize random sound clips like recordings and ringtones that I've downloaded. Hmmmm. Any ideas?
Sent from my Rezound using xda app-developers app

:good:
Sent from my HTC Rezound

I gotta say thanks since I cannot install on my device due to country restrictions.
Thank you!

you're welcome

Okay, it recognizes my mp3's if they are on the root of emmc but won't see them if they are in a folder either in emmc or SD. What's strange is it picks up recordings in a folder just fine and it also finds video's in folders as well. Really strange!
Wow! Once it plays the mp3 files it sounds incredible! My new music player for sure! Thank you!
Sent from my Rezound using xda app-developers app

Wow, impressive! Thanks. I was able to download it from Play.

Will see B)
EDIT: FORCE CLOSE
Sent via Rajnikanth

perfect virtualization, not much bass enhancements, but overall, its fking awesome
i purchased poweramp but i'll buy this one and trash poweramp,
has some similarities to zplayer,
i think this is built from zplayer's source

deathnotice01 said:
perfect virtualization, not much bass enhancements, but overall, its fking awesome
i purchased poweramp but i'll buy this one and trash poweramp,
has some similarities to zplayer,
i think this is built from zplayer's source
Click to expand...
Click to collapse

Shell has been granted...
Sent from my I9103

Ohschit said:
Okay, it recognizes my mp3's if they are on the root of emmc but won't see them if they are in a folder either in emmc or SD. What's strange is it picks up recordings in a folder just fine and it also finds video's in folders as well. Really strange!
Wow! Once it plays the mp3 files it sounds incredible! My new music player for sure! Thank you!
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
strange,i am still on GB but here no problems in readng folders and subfolders. it must be related to CM i guess
TJ!! said:
Will see B)
EDIT: FORCE CLOSE
Sent via Rajnikanth
Click to expand...
Click to collapse
if you are rooted or on CM, i suggest you to increase vm heapsize at least to 64 or even 96,let me know if that did the trick.
deathnotice01 said:
perfect virtualization, not much bass enhancements, but overall, its fking awesome
i purchased poweramp but i'll buy this one and trash poweramp,
has some similarities to zplayer,
i think this is built from zplayer's source
Click to expand...
Click to collapse
it's basically a refined version of zplayer,people behind it are the same. about bass enhancements,beside the EQ you can the increase Psychoacustic Processor effect.
Indha Lezzio said:
Shell has been granted...
Sent from my I9103
Click to expand...
Click to collapse
i was reading around,is it the first time it happens to you? should be related to SU binaries,try to update the binaries,open superuser swipe on the left and click on "su binary" option,update. if that doesn't fix the thing,you can try to wipe SU data and reboot. you have to grant again root permissions to your apps tho'. or you can try to use superSU,check here how: http://forum.xda-developers.com/showpost.php?p=30074360&postcount=7

it doesn't download background images on my phone, is that normal ? Uber Music used to download them instantly.

I've done what you mentioned and now seems that works better, but I'm realising that while playing music, if I push the eq button noozy crashes and restarts.
Any tip? Thanks in advanced
Sent from my I9103

hussainmushahid said:
it doesn't download background images on my phone, is that normal ? Uber Music used to download them instantly.
Click to expand...
Click to collapse
are you on wifi? it's really strange,on my phone it does it instantly. from what country are you from? you could try with a proxy/vpn pheraps and see what happens?
Indha Lezzio said:
I've done what you mentioned and now seems that works better, but I'm realising that while playing music, if I push the eq button noozy crashes and restarts.
Any tip? Thanks in advanced
Sent from my I9103
Click to expand...
Click to collapse
are you using any 3rd party EQ app? that may go in conflict actually.

skeletonboy said:
are you on wifi? it's really strange,on my phone it does it instantly. from what country are you from? you could try with a proxy/vpn pheraps and see what happens?
Click to expand...
Click to collapse
Yes I'm on wifi and its pretty weird, will try using a vpn.
Edit: Using proxy fixed it.

skeletonboy said:
are you on wifi? it's really strange,on my phone it does it instantly. from what country are you from? you could try with a proxy/vpn pheraps and see what happens?
are you using any 3rd party EQ app? that may go in conflict actually.
Click to expand...
Click to collapse
Nop, I just have voodoo but it happens without headphones too
Sent from my I9103

Your player is showing 5 sound enhancements but when i installed it its only showing 3...how come?
AUDIO PROCESSING FEATURES
Noozxoide Balanced X-EQ™ Processor
(Deliver balanced soundstage for each channels on the content.)
Noozxoide MaxxBass™ Processor
(Delivers the premium deeper 1 octave bassline.)
Noozxoide NogicQ™ Processor
(Delivers higher vocal definition and warm audio.)
Noozoxide Psychoacoustic II™ Processor
(Increase the speaker size and added warm attack effect on the content.)
Noozxoide LogicSurround ES™ Processor
(Create virtual surround sound for headphone or practical speakers and widen the soundstage.)

hussainmushahid said:
Yes I'm on wifi and its pretty weird, will try using a vpn.
Edit: Using proxy fixed it.
Click to expand...
Click to collapse
nice!
Indha Lezzio said:
Nop, I just have voodoo but it happens without headphones too
Sent from my I9103
Click to expand...
Click to collapse
hmmmm,i use Voodoo too and no problem here. btw to keep the Voodoo bass be sure to disable Psychoacustic Processor in Noozy. it may be a general problem then,not related to equalization. can you try to increase your vm.heapsize to 64? you can find it in the build.prop. make a backup of your build.prop first.

Hummer951 said:
Your player is showing 5 sound enhancements but when i installed it its only showing 3...how come?
AUDIO PROCESSING FEATURES
Noozxoide Balanced X-EQ™ Processor
(Deliver balanced soundstage for each channels on the content.)
Noozxoide MaxxBass™ Processor
(Delivers the premium deeper 1 octave bassline.)
Noozxoide NogicQ™ Processor
(Delivers higher vocal definition and warm audio.)
Noozoxide Psychoacoustic II™ Processor
(Increase the speaker size and added warm attack effect on the content.)
Noozxoide LogicSurround ES™ Processor
(Create virtual surround sound for headphone or practical speakers and widen the soundstage.)
Click to expand...
Click to collapse
MaxxBass and NogicQ are integrated by default,not settable by the user.

[APP]10 bands equalizer for android

Equalizer Pro for android.
Improve your android device sound with 10 bands equalizer. Equalizer Pro allows you to configure volumes of sound effects, to give you maximum enjoing, when you are listening music on your android device.
10 bands equalizer lets you configure sound amplitude frequency characteristic to get best sound from your device. There are available auxiliary sound effects: Bass Boost to boost low frequencies and Virtualizer to extend stereo effect.
Features:
- 10 bands equalizer
- Bass Boost
- Virtualizer
- 12 presets
- User presets
- Integration with common players (Google Play Music, Android Player, Winamp, etc)
- Stream services support (Pandora, Spotify, VK, etc)
The following presets are included:
Classic
- Default
- Super Bass
- Lite
- Blues
- Classical
- Dance
- Heavy Metal
- Hip Hop
- Jazz
- Pop
- Rock
- Flat

Awesome work
Works fine on my good old Galaxy Tab (where the app "Equalizer" from the Play Store ceased to work since cm is running on it (at last for the speakers)). Thank you very much.
(Now if we could have shortcuts to user presets on the home screen like in Equalizer … But even without it, I'm happy.)

Thank you for feedback! We are going to implement widget in next update.

I somehow have to correct myself. The equalizer works well when I play samples from within the app itself or start TuneIn Radio. It has no effect with PowerAmp or Xiialive. What comes to my mind is that the latter two have their own equalizers built-in.
The sliders are a little hard to operate. Until now, I had only a chance to try it on my Galaxy Tab P1000, cm10.2, using its speakers. The S2 will follow, but this may take a few days.
A widget is coming ... good news!

Thank you for the great app,,,, testing it on my htc rhyme stock ics and sensation xe running revelation 1.0.2 both working good but sometimes the sound crash a bit maybe you can fix that in the next update.... thank you very much

thank you for your share

GABPEKNAS said:
Thank you for the great app,,,, testing it on my htc rhyme stock ics and sensation xe running revelation 1.0.2 both working good but sometimes the sound crash a bit maybe you can fix that in the next update.... thank you very much
Click to expand...
Click to collapse
Hello! What the player do you use?

soundapps said:
Hello! What the player do you use?
Click to expand...
Click to collapse
I use stock htc music player,,,

GABPEKNAS said:
I use stock htc music player,,,
Click to expand...
Click to collapse
Thank you. I will check and will try to fix this issue.

I like it so far. Just don't like having to manually go in a turn it off.

I like it so far!
But there should be an option to not show it in the status bar.
Also it's really hard to operate in landscape mode because the ads are
pushing the contents upward and makes it to compact.
And in the portrait mode you can't see all the bands,
so it hard to get a good overview.
Otherways it's really nice to have a clean simple non flashy app
that really just do exactly what it's supposed to do.
So far your app and DSP Manager is the only apps that does this.
Keep up the good work!

right installed this on my android and the audio was better, yay tanks

Suggestion and a question.
S1: Add a reset button. I just changed the default EQ and don't see a way to reset back to the default. (Edit, clearing app data works but that would obviously kill all custom created EQ's).
S2: A widget button to toggle the equalizer on/off. (Automatic detection of wired or wireless profiles would be nice but we don't need to go too fancy) A widget to turn on and off would be nice.
S3: Maybe a donate option, to export saved equalizers that you created yourself.
Q: Why does it need to read SD-Contents?
I have to say I wish I found this earlier. It is prefect and is exactly what I was looking for. 10 Band equalizer with a clean simple interface.
_______________________________________________________________________________________________________________________
SvenSSSvensson said:
I like it so far!
But there should be an option to not show it in the status bar.
Also it's really hard to operate in landscape mode because the ads are
pushing the contents upward and makes it to compact.
And in the portrait mode you can't see all the bands,
so it hard to get a good overview.
Otherways it's really nice to have a clean simple non flashy app
that really just do exactly what it's supposed to do.
So far your app and DSP Manager is the only apps that does this.
Keep up the good work!
Click to expand...
Click to collapse
I for one hate notifications as well but for this instance want it. I need some headphone equalization but that same equalization creates muddy sound in my car. It serves as quick way for me to see if I still have it on
Settings --> Apps --> Equalizer Pro --> Right below force stop it has "Show Notifications", uncheck it. No more status bar notification.

Doesn't work for me using Google play . I'm an lg optimus f3
Sent from my LG-LS720 using Tapatalk

I can't hear the difference after using the equalizer
Sent from my GT-I9505 using Tapatalk

Would be perfect if there was an option to change/customize bands, my shure se215 are pretty great when i change the 5khz band and others, these bands are no option on your equalizer and others. I would pay even 10 euros for that option.

Hi,
I would like too the ability to customize each band.
I need the 120 hz band but there ise only a 162 hz band
Thanks

The suggestion of nonobio is realy good but I can imagine it is hard to do this.
I have another suggestion: I would realy like to set the pre amp manually.
The loudness of my mobile phone is very limited and the switch of a band to 3,0 db or more reduce
the loudness automatically. So it would be great to have the control of the pre amp settings.
Greetings

I guess this project is dead? That's a shame. This thing has/had potential. Just needed some minor tweeking.

It's really the best equalizer I've tested so far!!
And it is fully compliant with Sony Walkman app on my Z2 / kit-kat
Thanks a lot!

[APP][4.1+][FREE] Shou.TV - Live Stream (Broadcast) Your Android Screen

Shou.TV is a free screen recorder, can even broadcast the screen to https://shou.tv
No ads!
Android 5.0 Lollipop no root screen recording!
Android 4.x Jelly bean ROOT screen recording!
FREE at https://play.google.com/store/apps/details?id=tv.shou.android
Direct APK link at https://shou.tv/d/Shou.apk
Compared to other screen recorders:
1. Free
2. Unlimited time and size
3. No ads
4. No watermark
5. Stable system API and hardware accelerated rendering and encoding
6. Android Lollipop 5.0 support no root screen recording
The AirPlay screen mirror demo

pare tnx...

8rockz said:
pare tnx...
Click to expand...
Click to collapse
Thanks . Have you tried my app? Does it work?
Sent from my HTC One using XDA Premium 4 mobile app

Whoa! This is amazing!
Believe it or not, today I was searching for best ways to record the screen directly yet I didn't find anything!
Now, I come home and see this!
This is what I call law of attraction!
EDIT: I just tried running the app on my Nexus 4!
It definitely works and the video quality is great, however, it does not work when the audio source is set to internal (It says the recorder cannot start).
Anyway, thanks a lot for sharing the app with the XDA community!
P.S. What's the link to Google Play store? I might as well purchase it.

Every time I try to start recording I get an error message (screen shots work fine).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Sooo great!! Working on Xperia T (LT30p)... Thanks dude!

I think also that there is no sense to add ads to this app ;p. But I'll try this app for sure

Great App. This really well done. Very smooth transitions through screen slides with no pickup on any lag or slowness. Although Playback of the captured video will not play the internal sound of the clip. Moto X
Sent from my Moto X.

Very nice screen recorder but I'm more interested to the mirroring feature. Any plan when it will be available for testing?
Is it possible to mirror screen to a dlna compatible TV?

AppReviewBros said:
Whoa! This is amazing!
Believe it or not, today I was searching for best ways to record the screen directly yet I didn't find anything!
Now, I come home and see this!
This is what I call law of attraction!
EDIT: I just tried running the app on my Nexus 4!
It definitely works and the video quality is great, however, it does not work when the audio source is set to internal (It says the recorder cannot start).
Anyway, thanks a lot for sharing the app with the XDA community!
P.S. What's the link to Google Play store? I might as well purchase it.
Click to expand...
Click to collapse
Thanks!
This Internal source require high efficient audio encoders, so most devices won’t support it, I'm trying to fix it by adding new audio encoders.
Note: The Stereo Channels is needed if you choose Internal audio source. Just change Shou's settings to use stereo sound, then try again.
If you could provide some logcat output, will be great to help locate the exact problem.
I've write FAQ at https://shou.tv/pages/faq
The Google Play is not ready yet, thanks!!!

kriki200 said:
Every time I try to start recording I get an error message (screen shots work fine).
Click to expand...
Click to collapse
Thanks for testing it, I'd love to fix this bug if you could provide:
1. What's your device?
2. Have you changed the settings for Shou?
Really thanks!

brylcio16 said:
I think also that there is no sense to add ads to this app ;p. But I'll try this app for sure
Click to expand...
Click to collapse
Thanks, please feedback anything after you tried it.

MockingJay said:
Great App. This really well done. Very smooth transitions through screen slides with no pickup on any lag or slowness. Although Playback of the captured video will not play the internal sound of the clip. Moto X
Sent from my Moto X.
Click to expand...
Click to collapse
Thanks!
1. Have you changed Shou's settings?
2. You must choose audio source as MIC or Internal to enable audio recording. The Internal source also requires you to enable stereo in most devices, just try it.
Thanks for trying! Please keep me updated.

megasoft78 said:
Very nice screen recorder but I'm more interested to the mirroring feature. Any plan when it will be available for testing?
Is it possible to mirror screen to a dlna compatible TV?
Click to expand...
Click to collapse
The mirroring can work with about 2 seconds latency and very unstable right now, so I'm trying to make it better, may take about one week to make it for testing.
The DLNA will be supported too, you can even view the screen with any video player.
Also, could you provide some information to help improve Shou?
1. What's your device and Android version?
2. Have you tried to change Shou's settings to test different features? e.g. Output format, Audio source, etc.
Really thanks!

vecio said:
The mirroring can work with about 2 seconds latency and very unstable right now, so I'm trying to make it better, may take about one week to make it for testing.
The DLNA will be supported too, you can even view the screen with any video player.
Also, could you provide some information to help improve Shou?
1. What's your device and Android version?
2. Have you tried to change Shou's settings to test different features? e.g. Output format, Audio source, etc.
Really thanks!
Click to expand...
Click to collapse
I'm running it on an LG Optimus G (LS970 on Sprint) running PAC-man. App works flawlessly. I've changed all video settings and haven't noticed much change in how the app runs and records. I haven't tried audio yet, but so far it's amazing.

Just tried with my Razr M default settings running Paranoid Android and it's working so far. I'll post back after I use it some more.
Sent from my XT907 using Tapatalk 4

Johneedoe said:
Just tried with my Razr M default settings running Paranoid Android and it's working so far. I'll post back after I use it some more.
Sent from my XT907 using Tapatalk 4
Click to expand...
Click to collapse
Really thanks
Sent from my HTC One using XDA Premium 4 mobile app

vecio said:
This is my first thread at XDA, to show you my first app "Shou Screen Recorder". ROOT required!
I still published a paid app at Google Play, you can buy it if you guys want to keep Shou growing more quickly.
Join the Google+ Community to opt in testers to buy from Google Play https://plus.google.com/communities/116107186022971210893
The paid version is exactly the same as the free version posted here.
Click to expand...
Click to collapse
Very impressed as a first app. Highly polished and working as advertised. I purchased since in looking more forward to the mirroring. I'm hoping it can incorporate Airplay audio streaming and maybe even Miracast streaming of audio only and not do any video encoding on device, particularly if this can save CPU and/or increase the audio quality and reliability.
Now, for the recording, it worked great with default settings but would not start after attempting to change audio quality.
I'm on Nexus 4, official CM 10.2 nightly (10/09/13).

ralphwiggum1 said:
Very impressed as a first app. Highly polished and working as advertised. I purchased since in looking more forward to the mirroring. I'm hoping it can incorporate Airplay audio streaming and maybe even Miracast streaming of audio only and not do any video encoding on device, particularly if this can save CPU and/or increase the audio quality and reliability.
Now, for the recording, it worked great with default settings but would not start after attempting to change audio quality.
I'm on Nexus 4, official CM 10.2 nightly (10/09/13).
Click to expand...
Click to collapse
Wow, thanks! The first order!
The audio only recording and streaming will be implemented in the future.
Which audio settings you changed?
Thanks:good:

vecio said:
Wow, thanks! The first order!
The audio only recording and streaming will be implemented in the future.
Which audio settings you changed?
Thanks:good:
Click to expand...
Click to collapse
Cool!
The audio settings that wouldn't allow the system to start was the Source to Internal, even with channels set to Stereo.