hello every one,
this phone has a sim locked it says invalid sim card enter pin code so i tried the pin code provided by the current SIM provider and its wrong so after googling i found that my dads phone was locked to UAE network so i want to remove that but when i tried to flash TWRP , odin couldnt find the phone and using shell also couldn't find the phone , i have the drivers installed as i could root and flash on my note 3
anyone can tell me a guide to remove the sim lock ?
i removed it about 2 years ago with z3x samsung pro tool but when i tried now it says modem not found and when i connect the phone through usb its stuck in charging mode i cant change that mode so can't even connect smart switch to backup data .
thanks for the help.
hello guys;
i have solved that issue what i did was use z3x tool to remove FRP , only thing i could do anyway then i restarted then factory reset from recovery and voila i could use the phone on PC so i unlocked it using z3x
can some mod close this thread thanks .
hello guys;
i have solved that issue what i did was use z3x tool to remove FRP , only thing i could do anyway then i restarted then factory reset from recovery and voila i could use the phone on PC so i unlocked it using z3x
can some mod close this thread thanks .
Related
ok so i live in mauritius and got myself an s6 edge (sprint) but had to re install firmware on that for it was in a boot loop i re-installed sprint firmware but on switching it on its showing me this message "Attention , Power off this device insert the service provider UICC that came with the device then power on the device "[/U] the thing is that i dont have it and that the phone wont let me skip this which puts me in a situation where am stuck and unable to use the phone. can i bypass it to use the phone ??? would installing another rom help ???
Yup my phone continues to freeze and reset with the same error message on my s6. Have had no luck finding a solution. Going for a replacement phone because this makes it awful to try to use
My fix
I took my sim card out, reinstalled. Worked fine. I had the same problem.
wapi2211 said:
ok so i live in mauritius and got myself an s6 edge (sprint) but had to re install firmware on that for it was in a boot loop i re-installed sprint firmware but on switching it on its showing me this message "Attention , Power off this device insert the service provider UICC that came with the device then power on the device "[/U] the thing is that i dont have it and that the phone wont let me skip this which puts me in a situation where am stuck and unable to use the phone. can i bypass it to use the phone ??? would installing another rom help ???
Click to expand...
Click to collapse
bought this second hand verizon galaxy s3 4.4.2, rooted it with towelroot, and flashed twrp using twrp manager and when i tried to boot into recovery, i had a warning sign that software has been tampered with and i should contact verizon for help, i tried to recover using a stock rom with odin but it fails each time, i did some researcch for many hour without success.
sometimes the screen tells me to use software repair assistant, i was able to download it but it never detected the phone, just sits there while phone is connected, btw drivers have been successfuly installed.
i tried kies, didn't work either.
i know now that it had to do with locked bootloader, but this is my first verizon phone.
please any help will be appreciated!
Edit and solved!!!
refer to:
http://forum.xda-developers.com/showthread.php?t=2586319&page=31#post65689151
i need help with a galaxy s6 i tried to root it but when updating the binary frp locked up the phone and when i tried to flash the stock firmware on the phone through odin it failed and now the phone says it needs to do a emergency recovery on smart switch i put in the model number it worked but the s/n or meid isnt working on smart switch i tried every number on the box it came in and none of them are working
Phone Details:
Samsung Galaxy A3 2016
Phone Model- SM-A310F
S/N : R58H55KRMVF
No TWRP installed
1- Disabled OEM unlock on my rooted phone (im stupid) and now cant boot it.
2- Tried to flash Original rom with odin and failed.
3- phone is stuck with a screen "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
4- Tried to use smart switch software to restore but my phones not showing up in the recovery tab after connecting.
please help me to restore my phone. I even tried device initialization option and the serial number and the model number i entered in smart switch is correct but they are still asking me to check them!!! I also tried Kies 3.
XDA Visitor said:
Phone Details:
Samsung Galaxy A3 2016
Phone Model- SM-A310F
S/N : R58H55KRMVF
No TWRP installed
1- Disabled OEM unlock on my rooted phone (im stupid) and now cant boot it.
2- Tried to flash Original rom with odin and failed.
3- phone is stuck with a screen "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
4- Tried to use smart switch software to restore but my phones not showing up in the recovery tab after connecting.
please help me to restore my phone. I even tried device initialization option and the serial number and the model number i entered in smart switch is correct but they are still asking me to check them!!! I also tried Kies 3.
Click to expand...
Click to collapse
Greetings and welcome to assist. Can you get into download mode ? Smartswitch/kies both require download mode for emergency firmware recovery. Also you could use odin if you have recovery mode
Good Luck
Sawdoctor
As the title says i brick my phone samsung j7pro (sm-j730g/ds).. i tried rooting my phone
but i followed the wrong guide(stupid me) its for nougat and not for oreo8.1(my phone) and
when i restarted it (like on the video guide) im stuck in logo screen with “only official binaries can be flashed”.
And the worst is that when it restarted after i rooted it, it locked the USB DEBUGGING & OEM again.
-I tried flashing stock ROM using odin3 but it always fails..
-i tried samsung smart switch but it says "unsupported device"
Hope someone can help me.. or give me links to similar case coz i cant seem to find one..
smart switch
MrEckz said:
As the title says i soft brick my phone samsung j7pro sm-j730g/ds.. i tried rooting my phone and then when it restarted im stuck in logo screen with “only official binaries can be flashed”. And the worst is that when it restarted after i rooted it, it locked the USB DEBUGGING & OEM again.
I tried flashing stock ROM using odin3 but it always fails..
So now im stucked at logo screen.. i cant access my phone to unlock oem and usb debugging coz it wont reboot.. i can only go to download mode but i dont know what to do next..
Hope someone can help me.. or give me links to similar case coz i cant seem to find one..
Click to expand...
Click to collapse
you can try emergency recovery on smart switch on your PC !
peter couniaz said:
you can try emergency recovery on smart switch on your PC !
Click to expand...
Click to collapse
I already tried that but it says “unsupported device”
Any other way to fix my phone?