CyanogenMod 13 is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the unofficial Build of CM 13 for Jiayu S3 plus (not advanced or basic), with mt6753 soc
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download rom from here: https://www.facebook.com/MediatekAndroidDevelopers/
OR from xda DevDB (DOWNLOAD Tab)
Download Gapps from OpenGapps: http://opengapps.org/, choose Arm64 and Android 6.0
boot to recovery
wipe data if you are not coming from CM13.0 already
install rom and gapps
reboot
XDA:DevDB Information
Cyanogenmod for Jiayu S3 plus, ROM for all devices (see above for details)
Contributors
DerTeufel1980, superdragonpt, fire855
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: custom recovery installed
Version Information
Status: Stable
Created 2016-07-26
Last Updated 2016-07-26
Reserved
Reserved
Q: After ROM boot up, I'm getting SetUP wizard errors / other Gapps FC / Black screen on first boot, why ?
A: On marshmallow based Roms, you need to flash ROM and gapps at the same time
TWRP even allows you to flash multiple .zip files
Q: Why no Mediatek Engineering Menu?
A: Its Mediatek proprietary, ugly , not needed on our builds.
Relevant features used on Mediatek E. Menu have been ported to our builds already using aosp / our implementations ( Sensors calibration , Band Mode, etc)
Q: Do we get The Fast Charge you guys made on Lollipop RC's ?
A: Yes, Fast Charge implementation was implemented on our MM builds
Q: App "x" is not working, why?
A: First make sure the app works under Marshmallow
Q: Something wrong with my Bluetooth, can't connect /pair with my "x" device , car-BT
A: Bluetooth should be backwards compatible , some OEMs don't also follow some guidelines , surely can be improved.
Post your BT model, Car model and year to help us out determining compatibility issues
Woot! Glad to see this up and running Thanks for all the support!
Full CM13 Android in Mediatek phone. Thank you
edit: fixedd
Hi, first of all I would like to say thank u for all your hardwork
I have came across on the specifications page for Mediatek's MT6753 well which was our chipset anyway.
http://www.mediatek.com/en/products/mobile-communications/smartphone1/mt6753/
The CPU clock speed stated on the page was 1.5ghz. Ours was max clocked at 1.3ghz?
Is there any possibility, (not sure if our mtk kernel source is open) that we could get a speedboost, a step up of 200mhz for our cpu?
Or was the 1.5ghz version is already stable and has a chance to boost it up to MT6572's 1.7ghz as well.
I would be glad if anyone can enlighten me about this. Thank you.
Thankyou!!!!
@superdragonpt
Not sure if this is the right thread to report issues of the ROM.
1. Bluetooth not pairing with car. It can detect the headunit but when I try to pair after i enter the pin it fails. I am using the headunit for mitsubishi mirage 2013
Mirage CNE-6515-N HU Specs:
Main Amplifier:
Power Output: 20 Watts RMS x 4 channels into 4-ohms @ < 10 % THD+N
S/N Ratio: 70 dBA below reference. (Ref.: 1 Watt, 4-ohms)
Max Power: 40 x 4 watts into 4-ohms, all channels driven
Frequency Response: 20 Hz to 20 kHz -3dB Aux input used as source reference
3 Band Equalizer (Treble, Mid, Bass)
Reference Supply Voltage: 14.4 VDC
DVD/CD Player:
Compatible Formats: DVD-R, , DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, HDCD, SVCD,VCD, MPEG, JPEG, MP3/WMA burned into a DVD+RW or DVD-RW and CD-R/RW
S/N Ratio: 85 dBA
Dynamic Range: > 95 dB
Frequency Response: 20 Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 KHZ
D/A Converter(s): 6-channels high performance 24-bit, 192 kHz, multi-bit Sigma Delta modulation. DAC supports sample rates from 8-192 kHz.
Electronic Skip Protection (ESP): DVD: 2-3 sec, CD-DA: 10 sec., MP3: 100 sec., WMA: 200 sec. (ESP time approximate)
Mechanical vibration stability: 10-200Hz, X/Y/Z direction: 1.0G
Video Section:
Format: NTSC, PAL (auto-detect)
Output: 1Vp-p (75-ohm), buffered
Input: 1Vp-p (75-ohm)
FM Tuner Section:
Tuning Range: 87.5 MHz - 107.9 MHz
Mono Sensitivity (-30dB): 10 dBu
Quieting Sensitivity (-50dB): 15 dBu
Alternate Channel Sensitivity: 70 dB
S/N Ratio @ 1KHz: 58 dB
Image Rejection: 60 dB
Stereo Separation @ 1 KHz; 30dB
Frequency Response: 30Hz - 15 KHz, -3 dB
AM Tuner Section:
Tuning Range: 530 kHz - 1710 kHz
Sensitivity (-20dB): 20 dBu
S/N Ratio @ 1KHz: 50 dB
Image Rejection: 60 dB
Frequency Response: 50Hz - 2 KHz, -3 dB
Monitor Section:
Screen Size: 6.2" (Measured diagonally)
Screen Type: TFT Digital Display active matrix
Response Time: 30 ms rise time, 50 ms fall tim/Compositee resolution, DVD
Video in: 280,280 sub pixels, 1200 (W) x 234 (H)
Built-in Navigation (Via Micro SD Card)
SD Card: Micro SD
GPS
SiRF Prima 600MHZ CPU, Advanced ARM 11 Architecture
256 MB Nand Flash
256 MB DDR-400MHz RAM
Windows CE 6.0
USB
High-Speed USB 2.0
Bluetooth:
Hands-Free, Phonebook, Recent Calls (Dialed, Missed, Received) Synchronize, Caller ID and Audio Streaming, Mobile Phone
TPMS Ready (optional)
General:
Auxiliary Input impedance: 10 K-ohms
Power Supply: 10.5 to 16 VDC, negative ground
Fuse: 10-amp, mini ATm type
DN chassis dimensions : 7"x7"x 2" (178mm x 178mm x 100mm)
2. When SD card is used as "Internal Storage" and app is installed at SD card, every time I reboot all the shortcut icon disappears in Home Screen.
3. FB Messenger hangs when uploading pictures. Workaround grant permissions via Settings > App > Messenger
makona said:
@superdragonpt
Not sure if this is the right thread to report issues of the ROM.
1. Bluetooth not pairing with car. It can detect the headunit but when I try to pair after i enter the pin it fails. I am using the headunit for mitsubishi mirage 2013
Mirage CNE-6515-N HU Specs:
Main Amplifier:
Power Output: 20 Watts RMS x 4 channels into 4-ohms @ < 10 % THD+N
S/N Ratio: 70 dBA below reference. (Ref.: 1 Watt, 4-ohms)
Max Power: 40 x 4 watts into 4-ohms, all channels driven
Frequency Response: 20 Hz to 20 kHz -3dB Aux input used as source reference
3 Band Equalizer (Treble, Mid, Bass)
Reference Supply Voltage: 14.4 VDC
DVD/CD Player:
Compatible Formats: DVD-R, , DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, HDCD, SVCD,VCD, MPEG, JPEG, MP3/WMA burned into a DVD+RW or DVD-RW and CD-R/RW
S/N Ratio: 85 dBA
Dynamic Range: > 95 dB
Frequency Response: 20 Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 KHZ
D/A Converter(s): 6-channels high performance 24-bit, 192 kHz, multi-bit Sigma Delta modulation. DAC supports sample rates from 8-192 kHz.
Electronic Skip Protection (ESP): DVD: 2-3 sec, CD-DA: 10 sec., MP3: 100 sec., WMA: 200 sec. (ESP time approximate)
Mechanical vibration stability: 10-200Hz, X/Y/Z direction: 1.0G
Video Section:
Format: NTSC, PAL (auto-detect)
Output: 1Vp-p (75-ohm), buffered
Input: 1Vp-p (75-ohm)
FM Tuner Section:
Tuning Range: 87.5 MHz - 107.9 MHz
Mono Sensitivity (-30dB): 10 dBu
Quieting Sensitivity (-50dB): 15 dBu
Alternate Channel Sensitivity: 70 dB
S/N Ratio @ 1KHz: 58 dB
Image Rejection: 60 dB
Stereo Separation @ 1 KHz; 30dB
Frequency Response: 30Hz - 15 KHz, -3 dB
AM Tuner Section:
Tuning Range: 530 kHz - 1710 kHz
Sensitivity (-20dB): 20 dBu
S/N Ratio @ 1KHz: 50 dB
Image Rejection: 60 dB
Frequency Response: 50Hz - 2 KHz, -3 dB
Monitor Section:
Screen Size: 6.2" (Measured diagonally)
Screen Type: TFT Digital Display active matrix
Response Time: 30 ms rise time, 50 ms fall tim/Compositee resolution, DVD
Video in: 280,280 sub pixels, 1200 (W) x 234 (H)
Built-in Navigation (Via Micro SD Card)
SD Card: Micro SD
GPS
SiRF Prima 600MHZ CPU, Advanced ARM 11 Architecture
256 MB Nand Flash
256 MB DDR-400MHz RAM
Windows CE 6.0
USB
High-Speed USB 2.0
Bluetooth:
Hands-Free, Phonebook, Recent Calls (Dialed, Missed, Received) Synchronize, Caller ID and Audio Streaming, Mobile Phone
TPMS Ready (optional)
General:
Auxiliary Input impedance: 10 K-ohms
Power Supply: 10.5 to 16 VDC, negative ground
Fuse: 10-amp, mini ATm type
DN chassis dimensions : 7"x7"x 2" (178mm x 178mm x 100mm)
2. When SD card is used as "Internal Storage" and app is installed at SD card, every time I reboot all the shortcut icon disappears in Home Screen.
3. FB Messenger hangs when uploading pictures. Workaround grant permissions via Settings > App > Messenger
Click to expand...
Click to collapse
1- Known issue, thanks for the BT unit details
2- already answered
3- seems you find the cause, FB apps sucks... Thank them
Sorry guys but what is this?
http://www.needrom.com/download/s3-cm13-0/
It's baptized CM13. 0 from JiaYu.de for S3plus.
Is it other Rom, or someone tries to play it "smart" to the community?
TapaTalk and JiaYu S3 with Android MM!
Having used this for a few days now I love it however I have discovered one bug and one suggestion for better quality of life.
Bug: The aeroplane mode in the power menu (press and hold power button) doesn't work. The tile in the drop down menu still works fine, just the power menu one doesn't.
Quality of Life: Currently there is no way of disabling both sims, one always has to be enabled. Not a big deal for most people, but as someone who travels between countries quite frequently, it would be nice to be able to switch one sim off before putting on the other to avoid any possible roaming charges.
Thanks again for all the support, I was also wondering what version of Xposed would work with CM13?
Regards,
Hey, sorry, I missed your pm.
I need to check airplane mode.... Didn't notice yet.
The other thing isn't meant to be done this way in aosp. I may take a look at it as well, but I can't promise...
The M.A.D. Team
DerTeufel1980 said:
Hey, sorry, I missed your pm.
I need to check airplane mode.... Didn't notice yet.
The other thing isn't meant to be done this way in aosp. I may take a look at it as well, but I can't promise...
The M.A.D. Team
Click to expand...
Click to collapse
No bother I only noticed the airplane mode thing when I was trying to activate it boarding my flight haha
Wow, so this is what you meant when you said
DerTeufel1980 said:
Yeah, I started working for a German section of Chinese smartphone manufacturer (jiayu.de). Didn't have time anymore....
Click to expand...
Click to collapse
Good job anyways!
Update:
https://www.facebook.com/MediatekAndroidDevelopers/
Build 2 : 20160810
Source Synced ( (including Security Updates )
Fixed: Bluetooth (headset , car-BT)
Fixed: Internal Android VPN Client (tested on PPPT protocol)
Fixed Wi-Fi (random connection drops)
Added option to select 2.4 or 5Ghz Wifi frequency to advanced wifi options
Fixed FMRadio (merged previous patch)
Rom link on xda DevDB as well
cheers
Latest twrp recovery, compiled from source:
https://www.androidfilehost.com/?fid=24591000424954599
- fix: mounting adoptable storage
- fix: mounting encrypted devices
The M.A.D. Team
still hoping for an update for this rom Found bugs: Music playback lag and video playing lags.. can't play 1080p videos
Everything is perfect but the BT-CAR....
Its a Citroen C-Elysée 2014
Short description:
The combined port of the audio engine of Samsung Galaxy S8 and Galaxy S9
The global influence on the sound device, whether it be the sound from the browser, polyphony, microphone recording and audio player
Increases the detail, clarity, volume and selection of instruments in the track being played.
Treated vocals become more lively, deep and saturated low frequencies.
With a long listening to music does not occur discomfort in the ears.
Loss quality audio fixes.
The ability to control proprietary SoundAlive audio effects such as:
- Clarity
- Bass Treble
- Vocal Instrumental
- Concert Hall
- Tube Amp Pro
- Sorround
- 9 band EQ with presets configured
- UHQ Upscaler
- Rehampler UHQ
- Dolby Atmos
Features:
- HiRes effects are ported and used, (list above), ie when listening to music 32/384 or 24/192 and so on, the processing will take place at the same bit rate and frequency
- Dolby Atmos has full support for androids 9.0 and below
Smart installer:
- Support installation via Magisk and determining whether it is embedded in the system
- Support installation directly in the system without disconnecting the device through the terminal emulator, if recovery is not available
- Automatic creation of backup, all replaceable and editable files
- Automatic selection of installation on 32 and 64 bit systems
- Fully deleted, the installer is also an uninstaller, to delete, you must reinstall the archive in the recovery or magic, then the removal process will go
Settings soundalive:
You don’t need the presence of root for the engine, but it is needed to manage its settings.
Settings are stored in /system/etc/soundalive/SoundAlive_Settings.xml
If this file does not appear, flash SoundAlive again.
To apply the settings you will need to restart or restart the interface, which is much faster
Enter the following commands in the terminal:
su
am restart
Effects designed for individual outputs speaker, bluetooth, headphones.
BT__ - Bluetooth Headset
SPK__ - phone speaker
EAR__ - headphones
1 enabled, 0 disabled
Example:
<int name = "BT__SA_GLOBAL_EFFECT_SURROUND" value = "0" /> Effect disabled
<int name = "BT__SA_GLOBAL_EFFECT_SURROUND" value = "1" /> Effect enabled
INSTRUMENTAL_VOCAL
Instrumental Vocal Regulator
Values from -8 to 8, where 0 is disabled, to -8 more instrumental part is allocated, up to 8 vocals are allocated
BASS_TRABLE
Low and high frequency control
Values from -8 to 8, where 0 is disabled, -8 bass is allocated, up to 8 high frequencies
EQ
Presets for 9 band EQ:
0 - Normal
1 - Pop
2 - Classic
3 - Jazz
4 - Rock
5 - Customizable (manual equalizer adjustment is available on this preset only)
SA_SQUARE_INDEX
Clarity
Makes the sound more lively and clear.
Values 36, 38, 40, 42
SA_GLOBAL_EFFECT_DOLBY
SA_GLOBAL_EFFECT_DOLBY_OLD
Dolby atmos
A playback system that provides incredibly surround sound and surround sound effect.
To activate the effect, you need to enable, for example, preset music.
DOLBY value = "3"
DOLBY_OLD value = "3"
To disable everywhere put 0
0 - disabled
1 - auto
2 - movies
3 - music
4 - voice
SA_GLOBAL_EFFECT_SURROUND
Sorround
Create a rich surround sound effect.
0 - disabled
1 - enabled
SA_GLOBAL_EFFECT_TUBE_AMP
Tube amp pro
Emulate the tone of a tube amp.
0 - disabled
1 - enabled
SA_GLOBAL_EFFECT_CONCERT_HALL
Concert hall
Sound effect in the concert hall.
0 - disabled
1 - enabled
SA_GLOBAL_EFFECT_UHQ
SA_GLOBAL_EFFECT_UHQ_OLD
UHQ Upscaler
Improve sound quality when playing music and videos for the best listening experience.
To enable, put 1 on both versions
UHQ value = "1"
UHQ_OLD value = "1"
0 - disabled
1 - enabled
SA_GLOBAL_EFFECT_PBM_UHQ_OLD
UHQ Re-sampler
For BT:
0 - off
1 - 96 KHz
For EAR:
0 - disabled
1 - 192 KHz
2 - 384 KHz
SA_LIST_INDEX
3D processing, 5 presets, each has its own sound
0 - disabled
1-5 included
SA_EQ_INDEX_0, frequency 63
SA_EQ_INDEX_1, frequency 125
SA_EQ_INDEX_2, frequency 250
SA_EQ_INDEX_3, frequency 500
SA_EQ_INDEX_4, frequency 1k
SA_EQ_INDEX_5, frequency 2k
SA_EQ_INDEX_6, frequency 4k
SA_EQ_INDEX_7, frequency 8k
SA_EQ_INDEX_8, frequency 16k
9 band equalizer
Values from -10 to 10, where 0 is disabled, down to -10 lowers the amplitude of frequencies, increases to 10 to 10
Important for samsung phones:
Incompatible with official firmware and ports based on them
The list of supported firmware is possible and not all of them will work:
Lineage os
RR
Aosp
And all based on los and do not write about other ports (custom)!
Click to expand...
Click to collapse
Version 4.4:
- Updated installer for the new Magisk
- Updated audio engine
- Updated Sound Alive
- Alsa configuration port, qcom and exynos only
- Connected soundalive via alsa, only for qcom and exynos
- Setting up the audio engine based on the latest Galaxy S9 firmware using a disassembler
- Redesigned general sound panorama
- Added interface in the terminal emulator, for managing effects, in the test
Called by the command: sae
- Added automatic cleaning of the dalvik-cache and reboot
Changed the installation procedure for version 4.4:
1. After installing the engine, the dalvik cache will be automatically cleaned, then the phone should reboot, it will be necessary to wait ...
2. Set SA_Settings
3. Reboot
And enjoy the music
Uninstall:
Run the installer in recovery and the removal process will go
Android required: 5.0+
Recommended Android version: 7.0-9.0
Interface: No
System: 32/64/x86
Stable version: 4.4
Samsung Audio Engine V4.4: Download
SA Settings R8: Download
XDA:DevDB Information
[PORT][AUDIO] Samsung Audio Engine, App for all devices (see above for details)
Contributors
Roman_city
Version Information
Status: Stable
Current Stable Version: 4.3.1
Stable Release Date: 2020-01-09
Created 2019-02-25
Last Updated 2020-02-02
Reserved
Changelog:
Version: 4.2 | 10.05.2019
- Added Magisk support
- Added Speex from S9 improves speech processing
- Fixed bug with hanging outgoing and incoming calls
- Fixed bootloop on mtk android 8.1
- Fixed errors in the engine
- Fixed bugs in UHQ resampler
- Cut conflict files
- Adjustment in sound
Version: 4.1 | 25.02.2019
- Fixed bugs
- Added and corrected system file permissions
- Rewritten installation process
- High resolution effects for androids 5-6 included
- Fixed partition mounting
- Fixed installation process via terminal
- Added option resampler UHQ Upscaler
Version: 4.0 | 03.02.2019
- Updated SoundAlive52 to version 54 from Galaxy S9 9.0
- Added support for high resolution effects.
- Included high-resolution effects, ported from Galaxy S9 9.0 for Android 7.0-9.0, for Android 5.0-6.0 the standard resolution is used
- Fixed Dolby, UHQ effects
- Added choice of quality UHQ Upscaler
Resampler UHQ support:
Bluetooth:
Normal 44.1 kHz
UHQ 96 kHz
Headphones:
Normal 48 kHz
UHQ 192 kHz
SUHQ 384 kHz
- Security update for the engine
- Combined Galaxy s8 engine with Galaxy s9
- Added support for audio pro, low latency if system supports
- Updated pro audio driver
- Removed installation of Google media effects on systems without gapps - this has a good effect on sound
- Improved compatibility with android 5.0-6.0, 9.0
- Updated soundalive settings
- Fixed installer errors
Version: 3.0 | 12.01.2019
- Bugs fixed
- Improved compatibility with android 9.0
- Migrated sound
Version: 2.2 | 31.12.2018
- Updated DolbyAtmos from the latest Galaxy S9 update android 9.0 Pie
- Effects fixes
- Minor installer changes
- Balanced sound
Version: 2.1 | 24.12.2018
- Fixed bootloop on android 9.0 Pie
Version: 2.0 | 23.12.2018
- Fully updated engine from the latest version of the firmware Galaxy S8
- Ported SoundAlive from Galaxy S9
- Ported DolbyAtmos from Galaxy S9
- Added the ability to manage SoundAlive settings and effects such as:
Dolby Atmos
Concert Hall
Tube Amp Pro
Sorround
UHQ Upscaler
3D
EQ
- Fixed compatibility issues with some devices.
- The function that from long listening to music does not cause discomfort in the ears
Version: 1.0 | 28.11.2018
- Ported audio engine from Samsung Galaxy S8
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Interesting, got to try it.
Thanks Dev.
Nice! Thanks for that, now about the Mod
The App force close, is that normal? Are we supposed to edit the settings in the System Files?
Edit: Yes
Is there any apps SoundAlive? Cause I don't see it, but SoundAlive.xml is there.
For sure, my existing Dolby atmos crash.
teatea said:
Is there any apps SoundAlive? Cause I don't see it, but SoundAlive.xml is there.
For sure, my existing Dolby atmos crash.
Click to expand...
Click to collapse
Yes there is, it just does not show up on the Drawer, but you can see it on your Apps List
Guilhermex12 said:
Yes there is, it just does not show up on the Drawer, but you can see it on your Apps List
Click to expand...
Click to collapse
Well, somehow I can't open it. I try to use Sony Music - Setting - Sound Effect, doesn't show.
And most importantly, my Dolby atmos crash.
teatea said:
Well, somehow I can't open it. I try to use Sony Music - Setting - Sound Effect, doesn't show.
And most importantly, my Dolby atmos crash.
Click to expand...
Click to collapse
You actually can't use the app, at least for now, you must edit the settings via the Soundalive.xml file.
And what Dolby Atmos are you talking about? Are you on Oreo?
Guilhermex12 said:
You actually can't use the app, at least for now, you must edit the settings via the Soundalive.xml file.
And what Dolby Atmos are you talking about? Are you on Oreo?
Click to expand...
Click to collapse
I'm on Nougat. On my oreo and pie devices, atmos doesn't work. I keep my Nougat devices only for atmos.
No chance to install on official samsung j7 nougat rom ?
teatea said:
I'm on Nougat. On my oreo and pie devices, atmos doesn't work. I keep my Nougat devices only for atmos.
Click to expand...
Click to collapse
Ah, got it
The sound really got better.
But bootlup on the latest version. Previous worked.
Sharp aquos p1 device
OS: Android 6.0.1
Logcat can be provided if needed
This is an amazing mod. Using 4.2 on one plus 7 pro Android 10. The thread looks dead. I stumbled across it in Google search. Instructions need to be a bit clearer. It also won't install unless you install the sound alive APK. I chose the version closest to the date of 4.2 It really is night and day difference. Much better than the usual distorted sound of viper (for me). Using with digital plus. Sounds stronger than Atmos. Thanks.
Hello everyone, I didn’t go to this resource for a long time, as soon as free appeared, I solved many problems
Version 4.3.1:
- Fixed bootlap on android 9 and 8
- Fixed installation freezing
- Fixed installation failure due to Busybox in recovery and terminal
- Added automatic recovery in case of failure, if changes were made
- Optimized installer
- Optimized and tuned audio engine from captured Galaxy S9 dumps
- Edited SoundAlive settings
Added option to restore audio to a bt headset, a number of options have been removed and changed
https://forum.xda-developers.com/android/apps-games/audio-engine-samsung-galaxy-s8s9-t3904527
Rumin133 said:
The sound really got better.
But bootlup on the latest version. Previous worked.
Sharp aquos p1 device
OS: Android 6.0.1
Logcat can be provided if needed
Click to expand...
Click to collapse
Hello try the new version.
Roman_city said:
Hello everyone, I didn’t go to this resource for a long time, as soon as free appeared, I solved many problems
Version 4.3.1:
- Fixed bootlap on android 9 and 8
- Fixed installation freezing
- Fixed installation failure due to Busybox in recovery and terminal
- Added automatic recovery in case of failure, if changes were made
- Optimized installer
- Optimized and tuned audio engine from captured Galaxy S9 dumps
- Edited SoundAlive settings
Added option to restore audio to a bt headset, a number of options have been removed and changed
https://forum.xda-developers.com/android/apps-games/audio-engine-samsung-galaxy-s8s9-t3904527
Click to expand...
Click to collapse
Many thanks. Big fan. ?
Edit: removed 4.2 and installed 4.3.1. Much clearer sound. OnePlus 7 pro Android pie. Using together with ice sound profile 1 and Dolby digital from repeye. Sound is truly amazing. Thanks again.
tropical cactus said:
Many thanks. Big fan.
Edit: removed 4.2 and installed 4.3.1. Much clearer sound. OnePlus 7 pro Android pie. Using together with ice sound profile 1 and Dolby digital from repeye. Sound is truly amazing. Thanks again.
Click to expand...
Click to collapse
I'm glad you liked it)
Roman_city said:
I'm glad you liked it)
Click to expand...
Click to collapse
Please continue your great work. Hopefully, you could get it to work on Android 10 and more people will try it.
Thanks for this topic and very useful info...
Version 4.4:
- Updated installer for the new Magisk
- Updated audio engine
- Updated Sound Alive
- Alsa configuration port, qcom and exynos only
- Connected soundalive via alsa, only for qcom and exynos
- Setting up the audio engine based on the latest Galaxy S9 firmware using a disassembler
- Redesigned general sound panorama
- Added interface in the terminal emulator, for managing effects, in the test
Called by the command: sae
- Added automatic cleaning of the dalvik-cache and reboot
Samsung Audio Engine