Related
DISCLAIMER: I'm not responsible for anything that happens to your device. Use the steps below at your own risk . Be mindful of the facts unlocking bootloader voids your warranty and also hard resets your device - ALL YOUR DATA, SETTINGS, FILES AND APPS WILL BE DELETED. Rooting your device voids warranty as well. I own the Chinese SHT-AL09 8.4" LTE device and tested this root procedure ONLY WITH THIS MODEL. However, I believe there is a good chance the steps below will work for all other models of MediaPad M5, including WiFi only variants and 10" models. You MUST unlock your bootloader first. Do NOT use ramdisk image I provide in the steps below for any other model besides SHT-AL09 - doing so is guaranteed to render your device unusable. Ramdisk I provided is ONLY for SHT-AL09. You will need to extract your own ramdisk from stock firmware, specific to your device model
Credits:
@Wirmpolter - this root method largely based on his Magisk guide for Mate 9
@topjohnwu for creating the awesome Magisk Manager, which was used to patch ramdisk image with superuser binary
People, who created HuaweiUpdateExtractor
@magnumlove who pointed me in the right for developing root method in this post
This site, for hosting stock firmware for Huawei MediaPad M5
1. First, you will need to unlock the bootloader of your M5. Follow this guide
2. Transfer this patched ramdisk image to your device
Note for users with version of M5 other than SHT-AL09: Do NOT use the above ramdisk image. Download the full stock rom (update.zip) from the site I linked in the credits. Extract UPDATE.APP file from the zip. Then use HuaweiUpdateExtractor to extract ramdisk.img specific to your device. If you get errors in HuaweiUpdateExtractor - uncheck first 2 checkboxes for checksum verification on Settings tab and try again
3. Once bootloader is unlocked, install latest Magisk Manager from the official Magisk thread
4. Once Magisk Manager gives you a pop-up prompt to either download Magisk zip or patch the boot image file - chose to patch the boot image, but instead of boot.img select ramdisk.img from step 2. Magisk Manager should give you a message the image was successfully patched. It will be saved as patched_boot.img in MagiskManager folder on your sdcard. If it does not say success - do NOT proceed
5. Transfer the newly created patched_boot.img back to your PC
6. If you already have ADB and Fastboot tools installed on your PC you can just use what you've got. If not - get them from here
7. Connect your M5 to PC via USB cable
8. Run command prompt. If your ADB and Fastboot are installed as system app - you can do this from any path in CMD. If not - you need to switch in CMD to your ADB and Fastboot folder. Either way, the patched ramdisk patched_boot.img file must be in the same path, from which you will be running commands below in CMD window
9. Type "adb " in CMD window to start android debug bridge
10. Type "adb reboot-bootloader" and wait until your device restarts in Download mode
11. Once in Download mode, type "fastboot flash ramdisk patched_boot.img" - you should see some output from flash procedure, indicating successful flash
12. Once patched ramdisk is flashed, type "fastboot reboot"
That is it - you're done. Once your device reboots it will be rooted.
Note 1: Magisk Manager has it's own built-in superuser app and uses Systemless root, which works completely differently - you will not see external, standalone app like SuperSU or SU you might be familiar with in your App Drawer. The way to control the superuser app is from Magisk Manager itself: Settings->Superuser section
Note 2: I don't do tech support via PM, so don't PM me for help or with questions. Use the thread instead, and some other XDA members or myself will probably help you. Good luck!
Note 3: You may find some links to Huawei stock firmware in the 2nd post
UPDATE - August 6, 2018
Huawei officially approved 8.0.0.171 firmware with GPU Turbo for installation on SHT-AL09 devices. If you're doing first time root - just follow the original steps above. If you are already rooted and want to upgrade to 8.0.0.171 - follow the steps below:
1. Boot into download mode:
Code:
adb reboot-bootloader
from CMD window
2. Flash stock recovery from 8.0.0.171 to your device in fastboot:
Code:
fastboot flash recovery_ramdisk recovery_ramdis.img
3. Download and install the official OTA through Settings (full or just the update)
4. Boot into download mode again and flash patched ramdisk from 8.0.0.171
Code:
fastboot flash ramdisk patched_boot.img
5. OPTIONAL: If you were using TWRP or any custom recovery - you will need to reflash it back
Code:
fastboot flash recovery_ramdisk twrp.img
or whatever you named your custom recovery image
REMINDER: Do NOT use ramdisk image I provided for any other model besides SHT-AL09 - doing so is guaranteed to render your device unusable. This patched ramdisk is ONLY for SHT-AL09. You will need to extract your own ramdisk from stock firmware, specific to your device model
Needless to say, all the images you are going to flash must reside in the same directory, from which you are going to be running the CMD commands. If your ADB/Fastboot folder is not in your WIndows' PATH environmental variable - the images must be placed in the same folder where ADB/Fastboot binaries are, and CMD commands must be run from that folder.
C5Longhorn said:
Yes, they still work. I have the same model and build as you and I'm rooted.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I'm considering buying an SHT-W09 with firmware version 8.0.0.200 (C567), but I'd like to know if I can root it first. I do not know if the bootloader has been unlocked. Since you have the same version, can you confirm that it's possible to unlock and root, and if so, sketch out how it's done? I'm confused about whether it's possible with this firmware.
samiller said:
I'm considering buying an SHT-W09 with firmware version 8.0.0.200 (C567), but I'd like to know if I can root it first. I do not know if the bootloader has been unlocked. Since you have the same version, can you confirm that it's possible to unlock and root, and if so, sketch out how it's done? I'm confused about whether it's possible with this firmware.
Click to expand...
Click to collapse
Unlocking is possible *only* if you've gotten already your unlock code. As this service was suspended about 2 years ago there is no easy way to get it unlocked.
Small request to developers, or people with access to reliable file hosting: I don't have a developer account, so all the files I linked or referenced in the OP are hosted on free hosting sites. That file hosting has expiration date and max downloads limit, so the files will become inaccessible sooner rather than later. Please upload these files to reliable hosting and create a post with the links. I will link your post in the OP as a mirror.
In the meantime, mirror for SHT-W09 firmware: https://mega.nz/#!asVjmZrR!bW2OmXgTjnyVN4pqb9fA7OzAJ4bzil7YZxNW14qoCmk
I can confirm that this works on the 10.8" wifi model using the devices relevant ramdisk.img.
Hello, can somebody test sixaxis controller tool with root and magisk? There is a Trial in Google Play Store, that is called sixaxis compatibility checker without purchise the App. Maybe i want to buy the Tablet, but only with Dualshock 4 Support...
Just a heads up, been following threads on this forum for flashing a GSI. Now that you guys can root, you can also make backups of your own stock system image if you can't find one from Firmware Finder. Then you can safely try flashing the GSI.
@MishaalRahman well it's bit like chicken egg dilemma. As we do not have a stock system image for e.g. SHT-W09 we cannot patch the ramdisk.img and so we cannot get the stock system image ...
Thanks Apo11on, great to have root so soon for the M5! Do you know if there's a way to get Xposed working? I tried the Xposed Framework SDK 26 from inside Magisk, but it put me in a boot loop.
Question is, for those of us with the Non Pro version, can this still be done.
@OHP Yes. The OP did it with the 8.4" version which has no pro option.
I'm looking to buy the Chinese 10" wifi version myself but need Google Play Store + Services on it which I'm guessing the Chinese version doesn't have. Is one of the firmwares at the website you link to a global version of the firmware that will work on this model?
OHP said:
Question is, for those of us with the Non Pro version, can this still be done.
Click to expand...
Click to collapse
Doesn't matter what version you have as long as you have access to your device firmware and the ramdisk.img. You really need to reread the guide.
magnumlove said:
Doesn't matter what version you have as long as you have access to your device firmware and the ramdisk.img. You really need to reread the guide.
Click to expand...
Click to collapse
Problem I have is :
CMR-W09C432B123 (8.0.0.123) from download headlines.
notice the Bold letter.
my Firmware on device:
CMR-W09C432123 (8.0.0.123)
obliviously it could be nothing but I wouldn't want to brick my tablet :fingers-crossed:
OHP said:
Problem I have is :
CMR-W09C432B123 (8.0.0.123) from download headlines.
notice the Bold letter.
my Firmware on device:
CMR-W09C432123 (8.0.0.123)
obliviously it could be nothing but I wouldn't want to brick my tablet :fingers-crossed:
Click to expand...
Click to collapse
I have exactly the same tablet/firmware as you and it was fine. The additional letter also threw me a little. But if you are unsure, download Huawei Firmware Finder from Google play and it will automatically detect your tablets firmware (which you can download if you wish).
magnumlove said:
I have exactly the same tablet/firmware as you and it was fine. The additional letter also threw me a little. But if you are unsure, download Huawei Firmware Finder from Google play and it will automatically detect your tablets firmware (which you can download if you wish).
Click to expand...
Click to collapse
I took the plunge, and I am sucessfully rooted now :silly:
struggling with this part
2. Transfer this patched ramdisk image to your device
Note for users with version of M5 other than SHT-AL09: Do NOT use the above ramdisk image. Download the full stock rom (update.zip) from the site I linked in the credits. Extract UPDATE.APP file from the zip. Then use HuaweiUpdateExtractor to extract ramdisk.img specific to your device. If you get errors in HuaweiUpdateExtractor - uncheck first 2 checkboxes for checksum verification on Settings tab and try again
I have a CMR-W09 :s i can got the files downloaded and the huwai software not sure how i make a img
The good news is I followed these instructions yesterday and they worked perfectly (SHT-AL09).
The bad news is, I seem to have lost root overnight.
---------- Post added at 06:41 AM ---------- Previous post was at 06:22 AM ----------
And I figured out why I lost root; I was playing around with Developer options and switched the default GPU renderer from 'default' to 'Skia.' Apparently, this disables root access until you switch back. I regained root access on a reboot, lost it again after switching back to Skia, and then regained it after switching back to default.
I got the right image file from the site and huwai extract. I have googled how to use this app but what files do I extract as there appears to be. Alot ? I extracted all of them ? I don't have a ramdisk.img
Also thanks for writting this up. Without it I would be lost
Thanks for the efforts making this thread. Unfortunately my device is SHT-W09 and I'm still waiting for the right firmware. Is there anything I can help, considering I have the device?
@dkk6 I am in the same boat as you. Unfortunately I installed the update to 8.0.0 123 without having the Firmware Finder installed on the device. Do you have installed already the update to 8.0.0 123?
If not, you could install Firmware Finder and provide us with the ota url ...
This works perfectly no issues. i had some how maanged to download the wrong rom first. AND thankfully it did not have a ramdisk in. it is important that your firmware matches the firmware present on the site as explained. This was easy guide to follow now to flash it with somthing other then andriod
AndDiSa said:
@dkk6 I am in the same boat as you. Unfortunately I installed the update to 8.0.0 123 without having the Firmware Finder installed on the device. Do you have installed already the update to 8.0.0 123?
If not, you could install Firmware Finder and provide us with the ota url ...
Click to expand...
Click to collapse
I'm on 8.0.0.101
Can you use Android Q on the pixel A along with rooting?
sillyshyme said:
Can you use Android Q on the pixel A along with rooting?
Click to expand...
Click to collapse
Unfortunately, not. The pixel 3, 3a as well as the xl versions of both currently do not have magisk for Android q. The dev is working on it though. Keep your ear to the ground
Sent from my Pixel 3a using Tapatalk
Yes. The Pixel 3/3a versions use logical partitions in the Q beta. and it sounds like it's taking a major re-write to support it. I believe it is called system-as-root. The developer John Wu has been posting about it on Twitter. https://twitter.com/topjohnwu
Looks like Magisk for Q and the Pixel 3s is done: https://twitter.com/topjohnwu/status/1143762674666229762?s=09
12paq said:
Looks like Magisk for Q and the Pixel 3s is done: https://twitter.com/topjohnwu/status/1143762674666229762?s=09
Click to expand...
Click to collapse
It's pushed to the Cannery build https://twitter.com/topjohnwu/status/1144159892430659584
Magisk and TWRP all in the same day!
@pharpe wait TWRP got released?
Tiebe said:
@pharpe wait TWRP got released?
Click to expand...
Click to collapse
https://forum.xda-developers.com/pixel-3a/development/twrp-3-3-1-pixel-3a-t3943413
did any one successfully root q ?
I just patched the Q boot image with Magisk Canary and flashed in fastboot. Looks like root is working.
Update. I just installed Adawy and can confirm root is working. Here are the steps I used. This assumes you have latest ADB and fastboot setup
Install Canary Magisk Manager https://raw.githubusercontent.com/topjohnwu/magisk_files/master/canary_builds/app-release.apk
Downloaded the Q Beta image here https://developer.android.com/preview/download.html
Unzip and then unzip then unzip the image-sargo-qpp4.190502.019.zip file. You should see the boot.img.
Copy the boot.img onto your phone
Open Magisk Manager
Set the Repo channel in Magisk Manager to use Canary
Install Magisk and select patch boot image option
Find the boot.img file from step 4
Magisk will path the file and create magisk_patched.img
Copy magisk_patched.img back to computer
Reboot phone into bootloader
From computer run: fastboot flash boot magisk_patched.img
Reboot phone. Check Magisk Manager
Make sure you you click the Systemless Hosts button in Magisk Manager if you want top install Adaway.
pharpe said:
I just patched the Q boot image with Magisk Canary and flashed in fastboot. Looks like root is working.
Update. I just installed Adawy and can confirm root is working. Here are the steps I used. This assumes you have latest ADB and fastboot setup
Install Canary Magisk Manager https://raw.githubusercontent.com/topjohnwu/magisk_files/master/canary_builds/app-release.apk
Downloaded the Q Beta image here https://developer.android.com/preview/download.html
Unzip and then unzip then unzip the image-sargo-qpp4.190502.019.zip file. You should see the boot.img.
Copy the boot.img onto your phone
Open Magisk Manager
Set the Repo channel in Magisk Manager to use Canary
Install Magisk and select patch boot image option
Find the boot.img file from step 4
Magisk will path the file and create magisk_patched.img
Copy magisk_patched.img back to computer
Reboot phone into bootloader
From computer run: fastboot flash boot magisk_patched.img
Reboot phone. Check Magisk Manager
Make sure you you click the Systemless Hosts button in Magisk Manager if you want top install Adaway.
Click to expand...
Click to collapse
Yeah, can confirm, did this earlier today!
Just a question, did you have the issue that many apps show up in the appdrawer of pixel launcher, even if they shouldnt? (like Google PDF Reader, Sd Maid unlock or sideloaded Pixel livewallpapers etc.)
I guess its because of the bootloader is unlocked (for security reasons)?! Just really weird. No other issues observed till now.
peace!
Not sure I understand the issue. Why do you think they should not be in the app drawer? Do you have these apps installed? I've had no change in app drawer behavior since installing Magisk.
removed
pharpe said:
Not sure I understand the issue. Why do you think they should not be in the app drawer? Do you have these apps installed? I've had no change in app drawer behavior since installing Magisk.
Click to expand...
Click to collapse
To reproduce: download Googles pdf reader app and it will show up in your apps. When you open it, it takes you to the app info. Normally it does not show up, because it's just for viewing pdf's. It's the same with other apps that normally have no icon in the launcher.
Edit: saw your 2nd post. Case in point, i removed my link.
bejunk said:
To reproduce: download Googles pdf reader app and it will show up in your apps. When you open it, it takes you to the app info. Normally it does not show up, because it's just for viewing pdf's. It's the same with other apps that normally have no icon in the launcher.
Edit: saw your 2nd post. Case in point, i removed my link.
Click to expand...
Click to collapse
Interesting. I never realize that. I keep all my apps organized in folders so I only go to the app drawer for things I rarely use. I just assumed everything that was installed was in there.
pharpe said:
I just patched the Q boot image with Magisk Canary and flashed in fastboot. Looks like root is working.
Update. I just installed Adawy and can confirm root is working. Here are the steps I used. This assumes you have latest ADB and fastboot setup
Install Canary Magisk Manager https://raw.githubusercontent.com/topjohnwu/magisk_files/master/canary_builds/app-release.apk
Downloaded the Q Beta image here https://developer.android.com/preview/download.html
Unzip and then unzip then unzip the image-sargo-qpp4.190502.019.zip file. You should see the boot.img.
Copy the boot.img onto your phone
Open Magisk Manager
Set the Repo channel in Magisk Manager to use Canary
Install Magisk and select patch boot image option
Find the boot.img file from step 4
Magisk will path the file and create magisk_patched.img
Copy magisk_patched.img back to computer
Reboot phone into bootloader
From computer run: fastboot flash boot magisk_patched.img
Reboot phone. Check Magisk Manager
Make sure you you click the Systemless Hosts button in Magisk Manager if you want top install Adaway.
Click to expand...
Click to collapse
just to make sure i've got this clear: this method allows taking OTA updates via this method right? because patching the boot.img takes a backup of the unpatched image?
c_tho said:
just to make sure i've got this clear: this method allows taking OTA updates via this method right? because patching the boot.img takes a backup of the unpatched image?
Click to expand...
Click to collapse
That is my understanding from what I have read but I have not actually done it. You would uninstall via Magisk and it restores the original boot.img that it has backed-up. Then you are back to stock to take the OTA.
Hello,
I have a Galaxy On5 Pro in my home and was running AdHell till it could. Now that Samsung has stopped providing keys, an alternate way of disabling stock bloats and adblock was needed.
I tried the simplest way of rooting this phone, should work with any phone on On5 series.
1. Download the latest Firmware for your Phone from Updato or in other thread. Make sure it matches what you already have on your phone. Open archive and extract boot.img from that.
2. In Developer Options, enable OEM Unlocking.
3. Install Magisk Manager (as you normally do any apk).
4. Open Magisk Manager and click install, then select patch boot image. Select the boot.img you extratced in step 1 and select format to be 'tar'. Copy this patched image in Computer.
5. Boot in Odin and flash the patched boot image. Reboot the device.
You are rooted with Magisk.
If anyone is interested, I can provide more information if needed.
Thank you.
Works on SM-S550TL (TracFone)?
indianets said:
Hello,
I have a Galaxy On5 Pro in my home and was running AdHell till it could. Now that Samsung has stopped providing keys, an alternate way of disabling stock bloats and adblock was needed.
I tried the simplest way of rooting this phone, should work with any phone on On5 series.
1. Download the latest Firmware for your Phone from Updato or in other thread. Make sure it matches what you already have on your phone. Open archive and extract boot.img from that.
2. In Developer Options, enable OEM Unlocking.
3. Install Magisk Manager (as you normally do any apk).
4. Open Magisk Manager and click install, then select patch boot image. Select the boot.img you extratced in step 1 and select format to be 'tar'. Copy this patched image in Computer.
5. Boot in Odin and flash the patched boot image. Reboot the device.
You are rooted with Magisk.
If anyone is interested, I can provide more information if needed.
Thank you.
Click to expand...
Click to collapse
Boss, do u have a video instruction regarding this?
Tools needed: boot.img extractor. I recommend the one created by osm0sis from this thread:
https://forum.xda-developers.com/showthread.php?t=2073775
The first method was developed by osm0sis and removes magisk and all modules.
1. Unpack magisk_patched.img
2. Unzip overlay.dremove1.zip and place overlay.d folder in ramdisk folder.
3. Repack IMG
4. fastboot boot image-new.img created by repacking 8mg
This method is an offshoot of osm0sis version but boots core-only mode. Afterwards, remove the .disable-magisk file from the /cache folder for modules to work. Dot files are hidden files so if your root explorer can't see hidden files, run the "Remove disable_magisk" bat file in ADB.
1. Same as above but use the overlay.dcoreonly1.zip
For both methods you must be rooted for it to work. These are not cure all's for all bootloops.
Remove .disable_magisk bat file
https://www.androidfilehost.com/?fid=4349826312261684994
****************************************
Here is a fastboot bootable image to boot you into Magisk core-only mode, in case you bootloop due to flashing a bad module, in fastboot:
You will boot with root but modules disabled. After you remove the offending module you will need to go to /cache folder and delete the .disable_magisk file before your modules will work.
Once in fastboot:
fastboot boot image-newpixel3axl.img
You will boot with root but modules disabled. After you remove the offending module you will need to go to /cache folder and delete the .disable_magisk file before your modules will work.
fastboot boot image-newpixel3axlRemove.img
This one should remove magisk and all modules, then reboot and magisk should reinstall itself (ask to install necessary binaries). This is what osm0sis uses to recover from failed flashes. See this post:
https://forum.xda-developers.com/pi...odules-disabler-booting-magisk-t3976625/page2
Images are in this common folder. Pick the appropriate image for your phone.
6-4-20
https://www.androidfilehost.com/?w=files&flid=313291
Ohboy this is helpful. Just out of curiosity, how does one create a magisk patched boot image with core-only mode enabled? I would like to be able to make my own every time a new security patch is out.
Sent from my Google Pixel 3a XL using XDA Labs
Skittles9823 said:
Ohboy this is helpful. Just out of curiosity, how does one create a magisk patched boot image with core-only mode enabled? I would like to be able to make my own every time a new security patch is out.
Sent from my Google Pixel 3a XL using XDA Labs
Click to expand...
Click to collapse
I had planned on keeping these updated but here are the instructions.
You have to build your own copy of magisk from GitHub.
Clone magisk
Go to native/jni/core folder and edit the boot stages.cpp file in notepad++ like this:
Approx line 667
If (access(DISABLEFILE, F_ok) ==0)
Change == to !=
Now build magisk as per instructions on GitHub
One you have built it and there were no errors go to native/out/armeb-v7a folder and get a copy of the magiskini64 file.
Unpack your magisk_patched.img
In the ramdisk folder replace the init file with the .magiskini64 file (rename to init)
Repack your magisk_patched.img
The results are a patched IMG that will boot core only mode.
Tulsadiver said:
I had planned on keeping these updated but here are the instructions.
You have to build your own copy of magisk from GitHub.
Clone magisk
Go to native/jni/core folder and edit the boot stages.cpp file in notepad++ like this:
Approx line 667
If (access(DISABLEFILE, F_ok) ==0)
Change == to !=
Now build magisk as per instructions on GitHub
One you have built it and there were no errors go to native/out/armeb-v7a folder and get a copy of the magiskini64 file.
Unpack your magisk_patched.img
In the ramdisk folder replace the init file with the .magiskini64 file (rename to init)
Repack your magisk_patched.img
The results are a patched IMG that will boot core only mode.
Click to expand...
Click to collapse
Nice. Seems easy enough, if you ever disappear and stop updating images for some reason I'll give it a go ?
Sent from my Google Pixel 3a XL using XDA Labs
Hello
I have regular 3a with Android 10 installed, no twrp. I was in bootloop due to some module and was looking for solution to disable modules with only fastboot.
Before I found this thread, I went and reflash to stock.
Now I know.
Thanks for sharing this.
Tulsadiver said:
I had planned on keeping these updated but here are the instructions.
You have to build your own copy of magisk from GitHub.
Clone magisk
Go to native/jni/core folder and edit the boot stages.cpp file in notepad++ like this:
Approx line 667
If (access(DISABLEFILE, F_ok) ==0)
Change == to !=
Now build magisk as per instructions on GitHub
One you have built it and there were no errors go to native/out/armeb-v7a folder and get a copy of the magiskini64 file.
Unpack your magisk_patched.img
In the ramdisk folder replace the init file with the .magiskini64 file (rename to init)
Repack your magisk_patched.img
The results are a patched IMG that will boot core only mode.
Click to expand...
Click to collapse
I tried to do this for a Pixel 4 XL but the resulting boot image errors with "error boot prepare"
gudenau said:
I tried to do this for a Pixel 4 XL but the resulting boot image errors with "error boot prepare"
Click to expand...
Click to collapse
I have these already made for the pixel 4 xl on the pixel 4 xl forum.
Should just make an AK3 zip that pushes the init from this boot.img into any boot partition, so will work universally.
osm0sis said:
Should just make an AK3 zip that pushes the init from this boot.img into any boot partition, so will work universally.
Click to expand...
Click to collapse
Ooft.
Wait, can you flash that through adb though?
Sent from my Google Pixel 3a XL using XDA Labs
Skittles9823 said:
Ooft.
Wait, can you flash that through adb though?
Click to expand...
Click to collapse
Hmm.. true, non-working recovery is a definite problem. I'm in that boat right now on my OnePlus 7T, which is how I came across this thread.
Okay, better idea. Instead of mucking around with recompiling magiskinit for the above, just do it via boot script in overlay.d
osm0sis said:
Hmm.. true, non-working recovery is a definite problem. I'm in that boat right now on my OnePlus 7T, which is how I came across this thread.
Okay, better idea. Instead of mucking around with recompiling magiskinit for the above, just do it via boot script in overlay.d
Click to expand...
Click to collapse
Tbh, a custom boot.img is the only way to recover in some situations. Like if you can't boot into an adb environment or if you've never granted adb she'll root access.
Sent from my Google Pixel 3a XL using XDA Labs
Skittles9823 said:
Tbh, a custom boot.img is the only way to recover in some situations. Like if you can't boot into an adb environment or if you've never granted adb she'll root access.
Click to expand...
Click to collapse
Exactly, so a custom boot.img using overlay.d is the easiest way to accomplish that currently.
osm0sis said:
Exactly, so a custom boot.img using overlay.d is the easiest way to accomplish that currently.
Click to expand...
Click to collapse
How would one do that exactly without being able to use adb shell?
Sent from my Google Pixel 3a XL using XDA Labs
Skittles9823 said:
How would one do that exactly without being able to use adb shell?
Click to expand...
Click to collapse
overlay.d is built into the boot.img, so you take your latest magisk_patched.img, patch it with the overlay.d scripts to have the desired effect, then repack and flash via fastboot.
Same as the OP likely did, but no need to build Magisk to get a modified magiskinit, since you can do it all via boot script, like I said.
If anyone wants to experiment with this idea, here's the basic setup I used for my boot.img to fully reset the /data/adb directory for the soft brick issue (related to a magisk.db failure) I was seeing in the last canary.
Unpack the current magisk_patched.img for your device using my Android Image Kitchen (AIK) project, then create:
ramdisk/overlay.d/init.resetmagisk.rc:
Code:
on post-fs-data
exec u:r:magisk:s0 root root -- /sbin/init.resetmagisk.sh
ramdisk/overlay.d/sbin/init.resetmagisk.sh:
Code:
#!/system/bin/sh
rm -rf /data/adb/* && reboot
So, pretty simple stuff, and I'm sure it could be applied to some sort of Core Only workaround until @topjohnwu decides what he wants to do with all those Core Only boot.img Pull Requests.
osm0sis said:
overlay.d is built into the boot.img, so you take your latest magisk_patched.img, patch it with the overlay.d scripts to have the desired effect, then repack and flash via fastboot.
Same as the OP likely did, but no need to build Magisk to get a modified magiskinit, since you can do it all via boot script, like I said.
Click to expand...
Click to collapse
Cool. What I did was modify the magisk native/jini/core/bootstages.cpp
Edit: yes sir, your method works great to remove magisk and all modules. The method I had gives you the option to just remove the offending module, though sometimes you have to remove everything anyway. Thank you for your awsome input. If it is okay with you, I'd like to offer both methods in my posts on the pixel forums.
Tulsadiver said:
Cool. What I did was modify the magisk native/jini/core/bootstages.cpp
Edit: yes sir, your method works great to remove magisk and all modules. The method I had gives you the option to just remove the offending module, though sometimes you have to remove everything anyway. Thank you for your awsome input. If it is okay with you, I'd like to offer both methods in my posts on the pixel forums.
Click to expand...
Click to collapse
Sure! You could modify my method to remove all modules by running `magisk --remove-modules` instead of my `rm -rf` command (or just changing the `rm -rf` target), or even try to force Core Only mode by changing the setting directly in magisk.db then rebooting. It's a root shell so pretty much sky's the limit.
osm0sis said:
Sure! You could modify my method to remove all modules by running `magisk --remove-modules` instead of my `rm -rf` command (or just changing the `rm -rf` target), or even try to force Core Only mode by changing the setting directly in magisk.db then rebooting. It's a root shell so pretty much sky's the limit.
Click to expand...
Click to collapse
I have tried multiple methods from this thread but with no success.. Could you maybe help me by altering this boot.img to disable/remove all Magisk modules? Or maybe make it boot core only? It's for my OP 7T. Thanks!
https://mega.nz/#F!rxYDyQia!ziPLPvRsu3kxNBGt694OEQ
paplo said:
I have tried multiple methods from this thread but with no success.. Could you maybe help me by altering this boot.img to disable/remove all Magisk modules? Or maybe make it boot core only? It's for my OP 7T. Thanks!
https://mega.nz/#F!rxYDyQia!ziPLPvRsu3kxNBGt694OEQ
Click to expand...
Click to collapse
If `adb shell magisk --remove-modules` didn't fix the issue for you then you might be in the same boat I was and need to nuke all of Magisk's files in /data/adb.
Getting off topic for a Pixel thread, but here's the OnePlus 7T (hotdogb) image I made following my own instructions.
It's with an older Canary of Magisk so once you get it booting you should update to the latest Canary immediately.
osm0sis said:
If `adb shell magisk --remove-modules` didn't fix the issue for you then you might be in the same boat I was and need to nuke all of Magisk's files in /data/adb.
Getting off topic for a Pixel thread, but here's the OnePlus 7T (hotdogb) image I made following my own instructions.
It's with an older Canary of Magisk so once you get it booting you should update to the latest Canary immediately.
Click to expand...
Click to collapse
Yeah off topic I know.. Just spotted you had been in the same pickle with the same phone as me. I worked like a charm! Thanks!
Alguém sabe como fazer root no oneplus 9 Android 13.1?
First of all, please write in English. This is an English-only forum.
You can root the latest 13.1 firmware the same way you root others. I assume you already have the bootloader unlocked, proper drivers installed on your PC, and basic know-how of fastboot/adb commands. Here is the process:
You need to get the boot.img of your current firmware. You can extract it through MSM Tool's Read Back feature. In case you don't know about MSM, I have attached the boot.img for latest OOS13.1 firmware LE2115_13.1.0.500(EX01). Download and extract zip file and you will have boot.img. Copy this boot.img to your phone. Next you need to download/install Magisk v26.1 on your phone. Open the app, click Install and select that boot.img. Magisk will patch that boot.img and create a new patched_boot.img in your phone's Download folder. Copy that patched_boot.img to your PC. Reboot your phone to bootloader mode. Run this command to temporarily boot the patched_boot.img:
fastboot boot <your_patched_boot.img>
Note that this command is to boot it temporarily. It DOES NOT flash it. Ok, so once your phone boots up, open Magisk app again, click Install and select Direct Install. Now Magisk will root your current firmware permanently.
By this method of temporary booting and then rooting with Magisk's Direct Install method, Magisk will backup your original boot.img. So whenever there is a new software update, you can go to Magisk, select Uninstall, choose Restore Images, and Magisk will revert your original stock boot.img from it's backup. Then you can proceed with system update. Otherwise, without restoring original boot.img, the system update will fail because of patched_boot.img.
Here is the zip attachment. Make sure to extract it.
Thank you friend
shadabkiani said:
First of all, please write in English. This is an English-only forum.
You can root the latest 13.1 firmware the same way you root others. I assume you already have the bootloader unlocked, proper drivers installed on your PC, and basic know-how of fastboot/adb commands. Here is the process:
You need to get the boot.img of your current firmware. You can extract it through MSM Tool's Read Back feature. In case you don't know about MSM, I have attached the boot.img for latest OOS13.1 firmware LE2115_13.1.0.500(EX01). Download and extract zip file and you will have boot.img. Copy this boot.img to your phone. Next you need to download/install Magisk v26.1 on your phone. Open the app, click Install and select that boot.img. Magisk will patch that boot.img and create a new patched_boot.img in your phone's Download folder. Copy that patched_boot.img to your PC. Reboot your phone to bootloader mode. Run this command to temporarily boot the patched_boot.img:
fastboot boot <your_patched_boot.img>
Note that this command is to boot it temporarily. It DOES NOT flash it. Ok, so once your phone boots up, open Magisk app again, click Install and select Direct Install. Now Magisk will root your current firmware permanently.
By this method of temporary booting and then rooting with Magisk's Direct Install method, Magisk will backup your original boot.img. So whenever there is a new software update, you can go to Magisk, select Uninstall, choose Restore Images, and Magisk will revert your original stock boot.img from it's backup. Then you can proceed with system update. Otherwise, without restoring original boot.img, the system update will fail because of patched_boot.img.
Click to expand...
Click to collapse
Thank you for the specifics. I haven't decided whether or not I will modify my OnePlus 9 but I will keep this in mind.
Get token.
Flash token.
Enable unlock bl in dev options.
Install Magisk inside Andoid.
Congrats you did it.
Is there a boot img for LE2115_13.1.0.101(CN01)?
oneplus 9 LE2115_13.1. colorOS
ahumzert said:
Is there a boot img for LE2115_13.1.0.101(CN01)?
Click to expand...
Click to collapse
You can use MSM Tool to extract the Boot.img file, this is how most of use get our hands on the image files. I have provided a guide below on how to do this.
MSM Download Tool Read Back Mode: Create OnePlus Backup!
In this guide, we will show you the steps to take a backup of all the partitions on your OnePlus device via MSM Download Tool Read Back Mode.
droidwin.com