Database Info

How to prevent dust under screen

I got my phone screen replaced. that is what started the dust under the screen issue. I am sending back to have them clean it out again, but, I don't want this to happen again. Any recommendations of how to keep the dust out after I get it back? Cases, etc.?

Droidicus said:
I got my phone screen replaced. that is what started the dust under the screen issue. I am sending back to have them clean it out again, but, I don't want this to happen again. Any recommendations of how to keep the dust out after I get it back? Cases, etc.?
Click to expand...
Click to collapse
Theres away to do this using selecon u may search it here or in google peace
Sent from my Sensation using XDA

Droidicus said:
I got my phone screen replaced. that is what started the dust under the screen issue. I am sending back to have them clean it out again, but, I don't want this to happen again. Any recommendations of how to keep the dust out after I get it back? Cases, etc.?
Click to expand...
Click to collapse
You might want to apply some silicon around the screen's edges to prevent dust. The one I used was Ultra Black.
After that, get a case that seals the edges as well. I use the Incipio case, real good material and a great snug fit.

After that, get a case that seals the edges as well
I'll have to check this case out. I've already had my phone replaced once under warranty with TMO but I've already gotten dust under this screen too. And this after TMO told me that they HTC had "fixed" the issue. Obviously not. Going to swap this one out again before my warranty is up in a month or two.

bofiana said:
After that, get a case that seals the edges as well
I'll have to check this case out. I've already had my phone replaced once under warranty with TMO but I've already gotten dust under this screen too. And this after TMO told me that they HTC had "fixed" the issue. Obviously not. Going to swap this one out again before my warranty is up in a month or two.
Click to expand...
Click to collapse
Yep, a case definitely helps. Especially one that rises over the screen and covers the edges. It seals the phone from dust. Doesn't hurt opening the phone up daily and cleaning it with a q-tip too.

i have the same problem

hey ungraph
can u post pics as to where on the screen you applied the silicon gel. There is too much dust under my screen and its increasing by the day

I prevent dust under my screen successfully by using a plastic phone case that wraps over the corners of the phone and snaps tightly.I've had my device for almost a year now and the case has prevented the dust from coming under the screen! You can buy these types of cases on amazon very cheap about 5 dollars . They have a huge selection. Or you can try the silicone tricks. Personally I'd much rather use the case than put silicone on my device. These cases snap tightly shut and are hard plastic. They are not easy to get off but very effective in preventing the dust from entering! Hope this helps. It works for me! I also use a screen protector so the cases is wrapped Over the protector.
It's nice and tight . No dust whatsoever! I'd give it a try. Make sure to get the hard plastic case the others Are not tight enough. Best wishes! The top of the case covers the corners . It works wonderfully! It's up to you in whatever you decide to do but at least you have another option. It works like a charm!
Sent from my HTC Sensation 4G using xda premium

Spigen glas tr help

So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.

blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!

lambstone said:
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
Click to expand...
Click to collapse
Even if i just got the product there is nothing i can do to get a replacement? I mean isnt there like a 30 day thing if im not satisfied?

Yes there is, but you have to pay half of the price to get a new one
Sent from my SGH-M919 using Tapatalk 2

hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something

blackguy101 said:
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
Click to expand...
Click to collapse
Yeap, http://www.spigen.com/need1more
You have to be quick, there is a 30days time frame from when you purchased.

I must be just as bad. This is the most frustrating screen protecter to apply. I've been known to mess up once but never had this much problems. It floats off center, fingers holding it and getting in the way. Front plastic made it hard to estimate the edge with the rounded corners, getting caught as well on fingers as I let go pushing it slightly to one side. Unable to pry it back up without barely scraping the adhesive ruining one corner if not multiple edges from micro fuzz etc. The squeegee is worthless on the glass, back protector is fine but just have to deal with it.
Must be me. Oh well. Good thing I get the cheap ass protector with my Neo Hybrid case.

You tried the masking tape method?
Align it the screen protector without peeling off the back cover. Once it's in place, use making tape to hold it in place, like a book. Put some a strip from the front down across onto the phone. You should be able to "open" it like the page from a book. Then apply it. Should make things easier.

a Good company will stand behind their products. After seeing my brother's Hybrid case and reading some things on their customer service, I chose to pass on Spigen.
The clear coat on his bumper part is already chipping way, the whole thing looks like a cheap Chinese knock off ( bought directly from Spigen).
Zagg for example, a product I don't recommend at all because 1) It's a horrible product 2) it's ridiculously expensive. But the only thing they have is pretty much unquestioned replacements. Which I'm sure they can do because of ridiculous markup.
BTW, it might not be your fault at all, because these are rigid glass pieces, they have to be flat in order to stick to the phone. a SLIGHT imperfection will cause it to not stick.
All that being said, I went with MIME glass protector.

I have the glas t and I love it. They are much easier to apply then typical plastic ones as they dont bend and flop around when applying. When I applied mine it lined up perfectly but I did get lint under it right in the middle of the damn screen. I tried dealing with it but couldn't take it so I lifted it half way up with my finger nail and used scotch tape to get the lint off... dropped it back down and it looked even worse. I thought i wasted 27 bucks until the morning when I looked at my screen and bubbles were gone. So it is possible to remove lint just dont touch the adhesive.
Sent from my SPH-L720 using xda premium

just pay the half price spigen charges to replace it and move on. sulk it up as paying for a learning experience.
they already mention that the best method for aligning the thing is to use scotch tape on the top and bottom aligning it then drop down.
if you dont want any dust trapped, well don't mind me for stating the obvious but... don't work in a dusty room, close windows/doors turn off fans... don't breathe too hard on it lol.
use a photo air duster like a Rocket blower, to remove any left over dust/lint from cleaning the screen. I find that camera lens solution and lens paper works perfectly for prepping the surface. use the included stickers to remove any left over dust that cannot be blown away by the rocket blower.
if you can do not reapply once completely set down, when applying make sure it's aligned, bottom edges, make sure the gaps are evenly distributed on all sides, cutout holes centered...
when applying and you notice it is not centered gently lift up but never touch the adhesive side. lift up with only scotch tape.
I've been applying screen protectors for years and have gotten it down to a science... everyone comes to me to get theirs installed haha...

Once any part of this is adhered scotch tape is useless as it's glass. you have to use a suction cup or your finger nail you just have to be careful.

I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta

i installed mines 5 days ago and got a 2mm air bubble on the right side of the home button i couldn't squeegee it out and doesn't seem to want to go away. has anyone else experienced this? is there anything i can do to get rid of it or will it eventually go away on its own? fortunately its not on the actual screen but its still an eyesore

i re applied my twice, wif no side effect, just dun touch the adhesive side, use industrial musking tape to lift it and for dust on under the screen, use scotch tape to remove it. key point is to never touch e adhesive side wif ur finger. nothing wrong wif this product, love it! its like the original screen, just tat if u really scratch it, u can remove it and there is the perfect screen below it.
btw for those tat claim it could b an production defects tat the glass is not perfectly straight, being in the glass industry for over 30 yrs, its actually easier and cheaper to create prefectly straight glass then any wif the slightest curve.
Sent from my GT-I9500 using xda premium

blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
Same thing happened to me so I had to return it. The install came out perfect but the top left did not want to seal/adhere properly. I was so disappointed so I just went with the tried and true zagg. I purchased the protector from eBay so the return policy is different from their website.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

just tried lifting up that part of the screen for a few seconds and putting it back down. this air bubble is like a giant zit that wont go away

blackguy101 said:
I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
This is why I chose MIME. Email response is lightning quick and they include a hand written note in the package. Would definitely send you a new one without a question
Sent from my SGH-M919 using Tapatalk 2

The issue with it not laying after picking it up with your fingernail is not necessarily because the adhesive has gone bad. You need to level out the edge you stuck your nail under. Happened to me, fixed it with the squeege between the phone glass and the protector, prying up to level out the edge.

drbveb88 said:
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
So installed my tr, first try no bubbles.Seriously looks and feels like the samsung glass. AMAZING!!!
The steam trick works. Its not like its a sauna and your phone is a steamy. The steam is like a static electricity to dust.
Sent from my SCH-I535 using xda premium

Is there a plastic piece installed factory over the camera?

I can't tell.... and if there isn't I don't want to pick at it and scratch it.

Nope

I just did the exact thing. eBay has the part it's easy to fix I did it. Just don't get the acrylic one. And ask before buying even if the picture looks like the OEM glass one make sure! Unless you want the acrylic one it's less prone to cracking but will scratch.
Sent from my LG-H830 using XDA-Developers mobile app

darkpower_4 said:
I just did the exact thing. eBay has the part it's easy to fix I did it. Just don't get the acrylic one. And ask before buying even if the picture looks like the OEM glass one make sure! Unless you want the acrylic one it's less prone to cracking but will scratch.
Click to expand...
Click to collapse
How did you replace it?
I did actually get the acrylic one, as it is less likely to break again

kchannel9 said:
Nope
Click to expand...
Click to collapse
Ok, this not normal, how did it happened.:fingers-crossed:

kms108 said:
Ok, this not normal, how did it happened.:fingers-crossed:
Click to expand...
Click to collapse
Simply being in my pocket. You'll see on the forums this is happening to a lot of people. The consensus is that LG phoned it in on the camera glass quality.

kchannel9 said:
Simply being in my pocket. You'll see on the forums this is happening to a lot of people. The consensus is that LG phoned it in on the camera glass quality.
Click to expand...
Click to collapse
Yeh, I noticed all the glass problems, am I lucky or what, no problem for me with any problem mention in this forum about the glass built or any other stuff, and I had my G5 from day 1 after exchange it once, but I can remember the reason why I exchanged it.:fingers-crossed:
Just looking back at my camera len, I do have a deep scratch, but lucky I have a PET lens protector on, so it's only the protector that is scratched, at least I do have 3 spare one left.

kms108 said:
Yeh, I noticed all the glass problems, am I lucky or what, no problem for me with any problem mention in this forum about the glass built or any other stuff, and I had my G5 from day 1 after exchange it once, but I can remember the reason why I exchanged it.:fingers-crossed:
Just looking back at my camera len, I do have a deep scratch, but lucky I have a PET lens protector on, so it's only the protector that is scratched, at least I do have 3 spare one left.
Click to expand...
Click to collapse
Yeah I thought the same thing before I pulled the phone out of my pocket, nothing out of the ordinary had happened, and it was mysteriously broken. It's going to be like a recall if it gets really bad...

It doesn't take much pressure to brake it but it doesn't just do it on its own. This isn't the 6p being too tight around the glass and it breaking from expansion @kchannel9 just lift off what's left of your glass and peel it off no need to open the phone up. Just make sure no glass is left in it when you put the new one on. It should come with adhesive. And don't touch the lens! Cover it up if it breaks all the way it out or tape over it if it is just cracked to protect the camera! I might get the acrylic one to put over my glass replacement one now that I see how fragile it is.
Sent from my LG-H830 using XDA-Developers mobile app

It's simple to replace. Mine cracked and I ordered 2 off eBay. I had to replace it for a warranty exchange. Just use tweezers to get under the glass in the crack and peel it out. Insert the new adhesive sticker, then lay the new glass down. Takes about 5-10 minutes.
Sent from my LG-H830 using Tapatalk

Just replaced mine, was easy. The acrylic one I got from eBay/China works fine, though there are visible lines in the acrylic, it did not seem to effect the pictures taken. If I find with more testing that it does, I will get the glass again instead, and also add a glass protector as well. But for now seems fine.

Ok nevermind, after taking some pictures in full sun it is apparent that the acrylic adds a ghostly fuzziness to the images where there once was impressively sharp clarity. Going to order the glass version and a tempered glass protector for that piece as well. Really annoying, you'd think a $700 flagship phone wouldn't have this issue.

kchannel9 said:
Ok nevermind, after taking some pictures in full sun it is apparent that the acrylic adds a ghostly fuzziness to the images where there once was impressively sharp clarity. Going to order the glass version and a tempered glass protector for that piece as well. Really annoying, you'd think a $700 flagship phone wouldn't have this issue.
Click to expand...
Click to collapse
I think it's individual case, just unlucky, my unit is perfect.:fingers-crossed:

This thread's existence would suggest otherwise: http://forum.xda-developers.com/lg-g5/help/cracked-camera-lens-cover-t3351748/page6

Screen Protector Removal

I bought a Oneplus 8T directly from OnePlus and it came with a screenprotector installed.
Today, i was out running with my dog and fell (foot hit a hole in the yard). The screen protector did its job but is scuffed up a bit and i'd like to replace it.
This'll sound silly, but how do you remove the factory installed screen protector? I called Oneplus support and they said take it to a t-mobile store.... i didn't buy it from t-mobile. I would assume i can just slip a razor blade under the edge to try to get it pried up a bit but i want to be sure before proceeding.

just peel it off. It's just a film

Lol. Peeling the clear film off is one of the best parts of buying a new doodad.

Hmmm. I think that his may be tempered glass. Anyway, I can't get my fingernail under it to even get started ?
Perhaps my wife can get under it with her nails. Failing that, I guess I'll just to go a local phone accessory/repair shop so that at least if something gets damaged in the process it's not on me.

Question Screen De-Lamination: That was Fast!

My Flip 3 is about nine months old. Enclosed are two pictures, one from midnight on July 4, the second from 11:30 the next morning (noon-ish, July 4). The device was left open overnight because I was backing up my files to a USB stick in preparation for Samsung's fix of the screen. You can see the de-lamination of the factory-installed screen protector spread overnight from one-half the screen, across then entire fold-area, to encompass the entire screen, in less than 12 hours. There was no damage to the screen before the de-lamination started two days ago (July 2). The first indication was a tiny spontaneous de-lamination at the far right edge where the screen folds.
The phone is lovingly cared for, never dropped, no tears, no scratches on the protective film, no water exposure, battery-saver (85%) on, slow-chaage always on, etc... The phone is otherwise in "like new" condition. Samsung support recommends a local "UBreakIFix" store for the repair. I'll let you guys know how the repair goes.
So the "cost" for using this phone, so far, is $100 a month. $900 divided by 9 months, before it's now so fragile it can't be safely used. Wow.

That sucks.
Another dropped ball from Samsung.
This was predictable. Samsung exceeded the limits of the plastics and adhesive system. It is a high risk technical venture and they likely will never have the durability most would like.

As long as the screen underneath isn't cracked/loose, it should be fixable by removing the plastic screen protector and applying your own

buru898 said:
As long as the screen underneath isn't cracked/loose, it should be fixable by removing the plastic screen protector and applying your own
Click to expand...
Click to collapse
Yeah, the phone is in perfect condition, except for the protected coming off. If it were out of warranty I'd probablly try to fix it myself.
Interestingly, the local Samsung-authorized repair sites near me are taking one look at the phone and saying (even before they look at it), "No, we don't fix those. Check one of the other repair sites.... ." They say they'd need to replace the entire screen, rather than peel/apply a new protector. I'm not sure I'm comfortable with such an involved process being done by "just anybody." This phone is just so intricate it's hard to imagine a local repair store having the experience needed to "cut open the glued bits, avoid cutting the cables, replacing the screen, and gluing everything back together so it's secure and waterproof."
If Samsung has to fix it themselves then if the phone fails again they have no one but themselves to blame.
Does anyone here have experience with Samsung replacing their phone screen?

I took off the original screen protector about 4 weeks ago. It had no damage, but curiosity beat me and I wanted to try the real, naked screen
It felt sooooooo goooood! Smooth, no fingerprints, brighter, touch nav was better, no rainbow effect ect.
Went naked for over 3 weeks and no scratches or anything. But, a couple of days ago I applied myself the whitestone film. Easy to apply and It's better then samsungs.
So, had a nice adventure

I've read in many places that Samsung will honor the warranty even after removing the plastic screen. Double check on that, but I highly recommend replacing it
Had mine for barely a month before I couldn't deal with all the fingerprints and ugly feeling of the screen
YouTube videos are your friend for gauging the difficulty and seeing the process. Helped give me the courage to do it

wpscully said:
Interestingly, the local Samsung-authorized repair sites near me are taking one look at the phone and saying (even before they look at it), "No, we don't fix those. Check one of the other repair sites.... ." They say they'd need to replace the entire screen, rather than peel/apply a new protector. I'm not sure I'm comfortable with such an involved process being done by "just anybody." This phone is just so intricate it's hard to imagine a local repair store having the experience needed to "cut open the glued bits, avoid cutting the cables, replacing the screen, and gluing everything back together so it's secure and waterproof."
If Samsung has to fix it themselves then if the phone fails again they have no one but themselves to blame.
Does anyone here have experience with Samsung replacing their phone screen?
Click to expand...
Click to collapse
That should tell you something.
Getting it right on the first or even second shot may prove challenging. Wet apply hydrocell's are relatively easy, one sided adhesive ones like the stock ones are a true pain.

Anyone who has removed the stock protector can tell you the flaw that causes it. They are using a rigid protector with a weak adhesive.
The folding aspect has allowed Samsung to make the process sound much more complex, but it's installing a protector like any other phone. The only difference is taking more care to smooth it into the crease. Let it sit open for a day and try to take it light for the next few. Almost any third-party protector that is decent as a screen protector will work.
The stock protector is poorly designed, but it's not some magical specialty item. It is a slightly nicer version of the film Samsung wraps all their phones with so they look new out of the box.

Screen is fine, right?
Just like peeling off a bandaid IMO. ;-)

I have decided to send the phone back to Samsung for the replacement of the screen protector. They did not require a phone factory reset for this work. I'll report the quality of the repair work when the phone is returned. I'm hoping it will look "factory fresh". But I've also ordered an aftermarket protector in case I need to fix the fix.

wpscully said:
They did not require a phone factory reset for this work.
Click to expand...
Click to collapse
They may not have required you to do one, but I hope you did a backup. It doesn't always mean they won't end up doing one, planned or not.

Does anyone have a source to buy a new screen protector that isn't too rigid or thick? There are tons of options online but I'm not finding an OEM option to buy. But it sounds like some of you may have found a better option anyway. Any links would be appreciated!

drosenau said:
Does anyone have a source to buy a new screen protector that isn't too rigid or thick? There are tons of options online but I'm not finding an OEM option to buy. But it sounds like some of you may have found a better option anyway. Any links would be appreciated!
Click to expand...
Click to collapse
I've used Skinomi since my Pixel 2 XL days. The wet application process makes sense and the self repair screen makes it always look new. It's what I'm currently using on the Zflip

When I had mine before I got rid of it, I replaced the screen protector with a liquid one. Worked very well up until the actual screen started cracking on the crease. Keep in mind no drops and everyday use. For the 3rd generation it's definitely sad to see

Dr.Lost said:
When I had mine before I got rid of it, I replaced the screen protector with a liquid one. Worked very well up until the actual screen started cracking on the crease. Keep in mind no drops and everyday use. For the 3rd generation it's definitely sad to see
Click to expand...
Click to collapse
The radius of curve is too extreme.

twistedumbrella said:
... but it's installing a protector like any other phone. The only difference is taking more care to smooth it into the crease. Let it sit open for a day and try to take it light for the next few...
Click to expand...
Click to collapse
Thank you so much for this helpful hint. I previously purchased a Whitestone Dome screen protector with install jig. It went on perfectly, but when I folded the phone 30 minutes later it delaminated in the crease. I threw that $20 piece in the trash. Nowhere in the instructions or installation video did it say to wait a full day. Based on your input I installed the same kit again, waited a day before carefully folding the phone and, bam, works like a champ!

phil1737 said:
Thank you so much for this helpful hint. I previously purchased a Whitestone Dome screen protector with install jig. It went on perfectly, but when I folded the phone 30 minutes later it delaminated in the crease. I threw that $20 piece in the trash. Nowhere in the instructions or installation video did it say to wait a full day. Based on your input I installed the same kit again, waited a day before carefully folding the phone and, bam, works like a champ!
Click to expand...
Click to collapse
UV cured adhesive once fully cured is at its full strength. No additional time is needed.
Redirect Notice
Failure: incomplete cleaning; contaminated bonding surfaces, incorrect application (a thinner layer is better), or incomplete curing.

I used this one:
https://www.amazon.com/gp/product/B09LV43G8M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Not the Seesaw UV curing machine whatever thingy. But my second attempt worked fine. Thanks for your feedback.

phil1737 said:
I used this one:
https://www.amazon.com/gp/product/B09LV43G8M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Not the Seesaw UV curing machine whatever thingy. But my second attempt worked fine. Thanks for your feedback.
Click to expand...
Click to collapse
Yeah I have never had an easy time with either of those types of adhesive systems*. Hydrocell wet apply works best on non-folding screens for me but may not be ideal for a foldable.
*Whitestone sent the wrong screen in the right box so I never did install it. They were a complete offshore nightmare to deal with. The "new" one I received had been incorrectly reboxed. They caused me quit a bit of trouble... and never even apologized for the inconvenience. So free advertising for them.

phil1737 said:
I used this one:
https://www.amazon.com/gp/product/B09LV43G8M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Not the Seesaw UV curing machine whatever thingy. But my second attempt worked fine. Thanks for your feedback.
Click to expand...
Click to collapse
Glad to hear it worked out in the end. There is somewhat of a curing period with any adhesive, but rigid protectors will still separate over time. Given how flimsy those are, it will be a lot longer than the stock one anyway.
If you use a UV one, longer is not always better. The catch to UV activated adhesive is the same as UV resin. It is on a parabola where it will hit peak adhesion and then actually begin to break down. It's best to follow the exact times provided and then let it get some sunlight to finish off curing.
P.S. Whatever you do, do NOT use a liquid adhesive protector on this phone. It's not an S series or Note where the panel is flush with the case. It's an aluminum body wrapped OVER the screen. While they do claim it's water resistant, getting adhesive under that edge can eventually lead to pressure on the edges that will damage the screen and cause it to fracture.