Hello guys,
I have this device and and after an update the sim have stopped working,
The camera can't be connected,
There is no option available for fingerprint,
The wifi option is not clickable,
No sound can be heard only vibration output is present.
What have i tried?
- i tried downloading the update package and installed it through the software updater but of no use.
The internet is just not getting connected the device in locked as in the terms of bootloader.
I tried downloading the mi unlock tool but the mobile was not recognized by the system.
I cannot add my device to unlock procedure as no sim can be detected in the mobile.
Please guys guide me on how to repair my device.
Did you tried Hard reset
copvaibhav said:
Did you tried Hard reset
Click to expand...
Click to collapse
Hey thanks for the reply
Yes i did it after updating it as well but still the same problem persists
Witch update was this? A big or a small? When it was a big load it again. On update sektion can be activated that you can load the last update again and install. You have, to tab a few times on the update logo on update sektion to aktivate more option. Now you can right up on 3 point the option to load again.
Related
Hi guys,
this morning I checked my emails but had to unlock it with my password. I restarted my phone and then the settings for the fingerprint sensor were gone. Does anyone have suggestions what to do now cause I didn't know what to do,I called Huawei and my provider but none of them knew it.
Huawei MT7-L09
Happened to me twice but after restart it was there again.
freco said:
Happened to me twice but after restart it was there again.
Click to expand...
Click to collapse
I restarted the phone a few times, made a recovery and tried everything.. but there is no setting anymore..
it happened to me, after turning off at night , in the morning when I turned on the phone the fingerprint scanner was not working and it was missing the " ID fingerprint" in the options menu.
I had to do a hard reset :crying:
i have the same problem , any solution yet ? i restarted as well.. :crying::crying:
anirudhks said:
i have the same problem , any solution yet ? i restarted as well.. :crying::crying:
Click to expand...
Click to collapse
Make a backup of your data and do an hard reset, as I did
layar said:
Make a backup of your data and do an hard reset, as I did
Click to expand...
Click to collapse
yea thx budy that worked.. wierd..
i tried every thing even hard reset but nothing worked please heeelp :crying:
hmm.. hard reset done.. but still the fingerprint sensor wont show.. hepl me please.
It seems this is a software bug of Huawei reader implementation. I'm suffering from the same problem. However, when I go back to fingerprint ID settings and I try to setup existing fingerprint again, Mate 7 realizes the fingerprint is already registered. Then the reader works for a while again. Same symptom when I delete all fingerprint IDs and set them up again.
install the sotware again by local update
still the problem
Hi, i have android 6 with b560 and my fingerprint ID is not working, even the menu is hided...i dont know if could be that the fingerprint is not connected or....
please help!
Dam, hope someone find a fix for this. Good day all!
Write what region you have after write this code in dial pad *#*#2846579#*#* next 3 and then 4
Send from ? . If I help you buy me ?
same problem on my huawei p9 lite:
Vendor: hw, Country: eu. Software: B151 (flashed).
thanks,
=> huawei support checked my phone for another reason and plugged in the flex cable for fingerprint in the wrong direction!
the effect is that there is no menu fingerprint on B130 / B151 !!
I put it in the right direction and everything is fine again !
i have the same issue
phone: ascend mate 7 TL-10
vendor: hw
country: eu
running MM B571 with stock ROM
i flashed many ROMs and did hard reset a couple of times nothing changed
I solved by opening Phone! Fingerprint was Not connected. ( It was put in The wrong direction after sending it to Huawei Support for an other Problem with microphone). Huawei made The mistake.
hello
i have a nexus 5 unrooted phone.I got an OTA update yesturday in the morning of 16.1 MB(lollipop 5.1.1) improving some security issues,bug fixes
I downloaded the update with my wifi and it asked me to install,I clicked install...the phone reboooted and was installing............. in few seconds it showed a dead android with a red triangle showing error.I dont know what to do,it keeps showing the update even if i restart i "HAVE NOT ROOTED my phone ever" please any one tell me the solution.
Hi,
I am also facing the same problem and my mobile also not rooted. I tried by doing factory reset also. Still the update 16.1 MB notifications receiving and when i try to install it throws error.
Please update if anyone having the same problem or if it was working fine for you.
I am also facing the same problem and my mobile is not rooted. I tried by doing factory reset twice.
Please help
I was have rooted my lenovo a7000 before writing this thread, i using kingroot in my device. after that, i try to use freedom and market unlocker i my device. unfortunately, amid what im doing, my device show a notification that my google playstore has stoped working. and i have some problem with that market unlocker, it wont stop. then, i can solve my problem with playstore ad market unlocker, but there's new problem.... i cant turn on my device WLAN. so i restart it. after i restart it, my device wont work as normal condition. so i do the factory reset, and the loading is not loaded too. so i open my device and do the hardboot (take the battery and put it again). and after turning o my device work like first time i use it. and then i go to the setting, and update my firmware. downloaded but at the middle of updating firmware, it always failed. until now, it still stucing in the recovery mode, i have rebootinng it for a thousand times. what should i do? please help my Lenovo A7000.
ridwanfrdaus said:
I was have rooted my lenovo a7000 before writing this thread, i using kingroot in my device. after that, i try to use freedom and market unlocker i my device. unfortunately, amid what im doing, my device show a notification that my google playstore has stoped working. and i have some problem with that market unlocker, it wont stop. then, i can solve my problem with playstore ad market unlocker, but there's new problem.... i cant turn on my device WLAN. so i restart it. after i restart it, my device wont work as normal condition. so i do the factory reset, and the loading is not loaded too. so i open my device and do the hardboot (take the battery and put it again). and after turning o my device work like first time i use it. and then i go to the setting, and update my firmware. downloaded but at the middle of updating firmware, it always failed. until now, it still stucing in the recovery mode, i have rebootinng it for a thousand times. what should i do? please help my Lenovo A7000.
Click to expand...
Click to collapse
hi
thank you for using xda assist
you may post this here
http://forum.xda-developers.com/t/lenovo-a7000
few days ago i bought yureka s(yu5200)n rooted it n was trying to install google assistant through xposed framework.after that i was not able to recieve any file through bluetooth even when tapping on incoming request message.i did factory data reset but amy phone is stucked after i entered wifi details n just showing checking connections.pls help.there are no threads,custom roms related to this device.:crying::crying:
Prabudh said:
few days ago i bought yureka s(yu5200)n rooted it n was trying to install google assistant through xposed framework.after that i was not able to recieve any file through bluetooth even when tapping on incoming request message.i did factory data reset but amy phone is stucked after i entered wifi details n just showing checking connections.pls help.there are no threads,custom roms related to this device.:crying::crying:
Click to expand...
Click to collapse
Have you tried any of the solutions here? http://www.findhardreset.com/micromax-yu-yu5200-mobile-phone-hard-reset-and-remove-pattern-lock/
Hi guys, please help me with huawei id on this phone, i try everything i have found, but nothing of solutions didnt work. Sorry my bad english i hope u understand me and thanks to all who give me answer.
lcanl said:
Hi guys, please help me with huawei id on this phone, i try everything i have found, but nothing of solutions didnt work. Sorry my bad english i hope u understand me and thanks to all who give me answer.
Click to expand...
Click to collapse
Whats your problem?
Lukke2804 said:
Whats your problem?
Click to expand...
Click to collapse
My problem is huawei id, i need to erase id.
clear data for hi APp, Huawei apps etc or just do factory reset all will go away
shashank1320 said:
clear data for hi APp, Huawei apps etc or just do factory reset all will go away
Click to expand...
Click to collapse
Factory reset is done but huawei id dont erase.
lcanl said:
Factory reset is done but huawei id dont erase.
Click to expand...
Click to collapse
Talking about app or app data for it..app wont go with factory reset and need to root and disable manually
shashank1320 said:
Talking about app or app data for it..app wont go with factory reset and need to root and disable manually
Click to expand...
Click to collapse
Sorry but client dont know about this, so he done factory reset without cleaning id and appdata, phone is on activation now.
Unable to Get Phone ID
I am unable to get my Honor 8 phone ID which I require to 'unlock' the bootloader as the phone will NOT start up into Android. It boots to the point where it asks for the Region, then Language, then WiFi, etc and then it goes back to the beginning, THUS Region, Language, WiFi, etc. but it never boots into Android as a result I am not able to check the Phone ID or to enable anything like USB debugging, etc.
What I have done to get to this point:
The phone updated > it seems like the update was unsuccessful as it got stuck in a loop where it would ONLY boot to the Huawei eRecovery.
Then I read a post to 'roll-back' to the earliest version (FRD-AL10...135) which I did and then from the SD Card installed the stock firmware (update.app) by using the Pwr+Volme UP+Volume Down buttons. It succeeded to install the stock firmware and ever since then I am stuck at the Region, Language, WiFi, Terms Agreement,etc - BUT it never gets past the selection - it just loops over and over.
I have again installed the stock firmware as above, but it fails to start and continuously gets stuck at the Region, Language, etc selections.
Could anyone please provide help if possible.
All the other posts I read, I need the 'bootloader' to be unlocked, BUT I am unable to get the Phone ID to get the UNLOCK code.
I have also read some posts which suggests I use 'adb' and 'fastboot' to 'recover' the phone to stock firmware, BUT I constantly get an error - "FAILED - Remote: Command not allowed".
So at this point I am not sure how to go any further.
PS: I have also had the phone to my local Huawei Service Centre, but they refuse to help me with the Honor 8 as I did not buy it in S-Africa.
Equalibrium_tdb said:
I am unable to get my Honor 8 phone ID which I require to 'unlock' the bootloader as the phone will NOT start up into Android. It boots to the point where it asks for the Region, then Language, then WiFi, etc and then it goes back to the beginning, THUS Region, Language, WiFi, etc. but it never boots into Android as a result I am not able to check the Phone ID or to enable anything like USB debugging, etc.
What I have done to get to this point:
The phone updated > it seems like the update was unsuccessful as it got stuck in a loop where it would ONLY boot to the Huawei eRecovery.
Then I read a post to 'roll-back' to the earliest version (FRD-AL10...135) which I did and then from the SD Card installed the stock firmware (update.app) by using the Pwr+Volme UP+Volume Down buttons. It succeeded to install the stock firmware and ever since then I am stuck at the Region, Language, WiFi, Terms Agreement,etc - BUT it never gets past the selection - it just loops over and over.
I have again installed the stock firmware as above, but it fails to start and continuously gets stuck at the Region, Language, etc selections.
Could anyone please provide help if possible.
All the other posts I read, I need the 'bootloader' to be unlocked, BUT I am unable to get the Phone ID to get the UNLOCK code.
I have also read some posts which suggests I use 'adb' and 'fastboot' to 'recover' the phone to stock firmware, BUT I constantly get an error - "FAILED - Remote: Command not allowed".
So at this point I am not sure how to go any further.
PS: I have also had the phone to my local Huawei Service Centre, but they refuse to help me with the Honor 8 as I did not buy it in S-Africa.
Click to expand...
Click to collapse
Dload the same firmware which you had before b135
shashank1320 said:
Dload the same firmware which you had before b135
Click to expand...
Click to collapse
It is impossible to determine which firmware the phone had before it broke as I imported the phone from China, and I did not have a reason to unlock the phone before it broke, hence the reason I did not have a need for the Product ID when the phone functioned properly, it is only after it broke that I had to have access to all this information in an attempt to get it back to a functioning state. That being said, the phone worked perfectly for a week until it did an OTA 'update', when the phone restarted I was presented with all kinds of trouble.
I have since been able to start the phone up in Android after I had to buy DC-Unlocker credits to get the phone to boot properly. UN-locking the phone via DC-Unlocker, unlocked the FRP and only thereafter I was able to unlock the bootloader and root the phone, and get access to USB debugging settings, etc.