Related
this is a work-in-progress development project for porting CyanogenMod 9 (ICS/4.0.4) and ClockworkMod Recovery 5 to Amlogic AML8726-M tablets.
this is not perfect at all. and I'm very busy. progress will be very very slow. I may not be able to answer your question/request. if you have some idea for improvement, please do it freely.
there is no support from any makers/vendors. you must agree all risks by installing non-supported files, it may brick your tablet, and you may lose official support/warranty.
* YOU MUST READ CAREFULLY POST#1, #2, AND #3!
* DO NOT USE IF YOUR TABLET IS NOT LISTED BELOW. IT WILL BRICK YOUR TABLET!
* project page
http://androtab.info/cyanogenmod/amlogic/
* supported tablets
ainol NOVO8 Advanced
Digma iDx7 (a.k.a. WayteQ xPAD-70)
Digma iDx10/iDx10 3G
* CM9 current status (2012/4/12)
not work:
3G, camera, and many things which you expect to work
work:
3D, accelerometer, audio, gapps, hardware accelerated video, HDMI, internal NAND flash, remote controller, SD card, touchscreen, USB host/device, vibrator, wlan
* changelog
refer git log
* resources
http://www.cyanogenmod.com/ (What is CyanogenMod?)
http://source.android.com/source/
http://wiki.cyanogenmod.com/index.php?title=Building_from_source
http://goo-inside.me/gapps (Google Apps)
http://review.cyanogenmod.com/#q,status:merged,n,z (CyanogenMod merged changes)
https://github.com/naobsd/cm_bootable_recovery/compare/ics...ics-naobsd (placeholder to cherry-pick changes)
https://github.com/naobsd/cm_external_e2fsprogs/compare/ics...ics-naobsd (placeholder to cherry-pick changes)
https://github.com/naobsd/cm_system_core/compare/ics...ics-naobsd (placeholder to cherry-pick changes)
https://github.com/naobsd/cm_device_amlogic_aml8726m
* links
http://www.chinadigitalcomm.com/ainol-mid-f105/source-code-ainol-novo8-android-t10767.html
http://forum.xda-developers.com/showthread.php?t=1478734 (psquare's CM7/9 for NOVO8 Advanced)
http://ct704ct1002.forumgratuit.org/t711-cyanogen-9-sur-ct704-et-ct1002 (users' forum for CT704/1002)
* How to boot ClockworkMod Recovery 5
1. download recovery.zip and unzip it
2. put aml_autoscript and uImage_cwm on root of SD card
3. insert SD card
4. power on
you can flash uImage_cwm directly into recovery partition. then, you can boot recovery with VOL+ + POWER.
ClockworkMod Recovery 5 can't install official update.zip. if you want to reinstall official ROM, use uImage_recovery in official ROM.
* How to control ClockworkMod Recovery 5
for ainol NOVO8 Advanced
VOL-/jogball down: down, VOL+/jogball up: up, POWER/jogball push: select, SEARCH/BACK: back
* How to install CyanogenMod 9
1. download update.zip and put it on internal NAND flash or SD card (don't unzip it)
2. reboot recovery
3. install update.zip
4. wipe data/factory reset *1
5. reboot
*1 only if you are upgrading from non-CM9 ROM (CM9 1st install)
* issues
- mic input(audio record) doesn't work.
- accelerometer orientation on Digma iDx7 is wrong. please disable it for now.
- scaling and rotating are not worked for hardware accelerated video. video is always displayed as fullscreen and landscape. please use media player which has fullscreen mode (no UI parts).
- to use USB mass storage mode, /sdcard needs to be mounted. i.e. SD card need to be inserted, or, internal NAND flash need to be mounted on /sdcard (by Settings -> Storage -> Storage configuration -> Use internal storage).
- TS calibration is missing. resistive touch screen will not work.
* random notes
- external SD card and internal NAND flash
on CWM, external SD card is mounted on /sdcard. internal NAND flash is mounted on /emmc and referred as "internal SD card".
on CM9, external SD card is mounted on /mnt/sdcard. internal NAND flash is mounted on /mnt/nand.
- ubifs
no ubifs support for now. which is better, yaffs2 or ubifs?
ubifs should be supported if clockworkdmod is used as backup tool for official rom.
- rootfs
currently ramdisk in kernel is used as rootfs. modifying kernel by hand is not so smart.
should try to make initrd separately and pass it via bootm 2nd arg.
- reboot
reboot doesn't work. if power is connected, reboot will work, but power off also act as reboot
reboot recovery/bootloader doesn't work at all. use VOL+ while power on.
- memsicd
is running to use accelerometer (and magnetic field sensor). it also tweak axes by ro.sf.hwrotation and ro.sf.gsensorposition.
- magnetic field sensor
is detected but not worked/not existed. magnetic field aware apps may not work correctly.
hi
hello
works great.
You are really great.
your work with the de novo 8 will be finally a good tablet.
sorry I do not speak English
good luck
Thank you very much from France for your work !!!
I will try this version as soon as possible.
Bye.
First of all: Thank you! It looks great! ;
But, the "- no ubifs support" means I can't mount sd-card or connect internal memory to pc?
I tried, but it not works...
Thanks again!
bigdee888 said:
I can't mount sd-card or connect internal memory to pc?
I tried, but it not works...
Click to expand...
Click to collapse
thank you confirming "not work" things.
for ubifs, please learn about it. this project/thread is for developers.
smeexx said:
your work with the de novo 8 will be finally a good tablet.
Click to expand...
Click to collapse
I can't promise my CM7 port will be good for you. I'll do what I can do, but I can't do what you want.
thank you for your cooperation!
from my personal experience, probably some non-dev people will start to complain "XXX is not working! I need it! please support it asap!". and, 1 month after, "XXX is still not working! terrible! tell me current status of your work!".
this is development project. my files are just for dev people, and non-dev people who know dev work is really difficult or need a lot of time.
my git repo are pushed to github. anyone who can build android/cyanogenmod can build my CM7 for novo8 with it. (how to build is around here and there. don't ask here)
about me(currently only 1 dev here), I'll work for this project only on my free time. I don't have enough time as usual. nothing may be changed within a month. don't ask ETA even if I say "I'll do it soon".
as a fact, on my another project, some people waited some months to get working accelerometer.
test report is always welcome from everyone. but don't expect that issues/missing featues will be fixed if you can't fix yourself without effort.
if you don't like my CM7, please use another one. I never say my CM7 is best, I don't force people to use my CM7.
I'm looking ZT-280 gingerbread (it seems CM) rom. I think something can be used for us. e.g. they have latest mali modules
there is also Gadmei T720 (probably froyo) rom posted on www.chinadigitalcomm.com. I'll check it too.
if you know another rom for other AML8726-M based tablets, please tell me.
USB device function, mount from PC, seems to be working.
USB host function is also working.
paths in vold.fstab are wrong so SD card and USB disk can't be accessed in CM. I'll fix it in next image.
HDMI output can be enabled via set_display_mode.sh command. it may need to connect HDMI cable before booting. screen is not scaled. 720p is shifted, probably set_display_mode.sh need to be tweaked.
I need to check how it works on stock rom.
Its really great to see that some initial work is being done for that niche-tablet with great hardware potential.
I really can't await for the first working GB rom on the novo 8.
@fun_ As you mentioned yourself to have less time to work on the rom, would it be possible to share the source? As it might be a good base for other people to help improving your work.
Cheers
Toshimitsu said:
I really can't await for the first working GB rom on the novo 8.
Click to expand...
Click to collapse
"waiting" doesn't help this project at all. why you didn't try 1st?
Toshimitsu said:
@fun_ As you mentioned yourself to have less time to work on the rom, would it be possible to share the source? As it might be a good base for other people to help improving your work.
Click to expand...
Click to collapse
really soon unless no one prevent me by posting worthless question.
(for me, soon is one of which, within a day, within a week, within a month, within a year, or never happen)
--
I forgot to write (and did it just now) "don't ask ETA" on post#9.
HDMI output is tweaked. remote controller is working properly now.
20111023 files are uploaded.
repos are pushed to github. see OP. some tips should be added (will do later).
20111024 uploaded (replaced few hours ago)
fix small graphics issue
You are really cool man. Nice job.
Excellent development, Mr. fun_!
I plan to do a write up in my blog about this. As for your questions about Zenithink ZT280 of different form-factors, it's unclear whether they based on Android 2.3 or -- most probably for me, at least -- on Android 2.2.
Together with Ainol Novo 8 and Gadmei T820 there's another device looking like an Ainol's rebrand: Aigo M801.
Can anyone with this build make some screenshots, or better video clips and post them (link) here? Of interest are:
-- 2D (GUI rendering/video decoding and rendering) hardware acceleration/performance, preferably with some comparison to stock A2.2;
-- overal agility of the build, maybe some benchmarks;
-- what doesn't work at this point?
Thank you! Can't wait to publish this Mr fun_'s great breakthrough for my readers in English, Russian, Japanese.
aludal said:
I plan to do a write up in my blog about this. As for your questions about Zenithink ZT280 of different form-factors, it's unclear whether they based on Android 2.3 or -- most probably for me, at least -- on Android 2.2.
Click to expand...
Click to collapse
as I wrote Zenithink released 2.3 rom. and I found Pandigital Nova has 2.3.
aludal said:
Together with Ainol Novo 8 and Gadmei T820 there's another device looking like an Ainol's rebrand: Aigo M801.
Click to expand...
Click to collapse
I got my novo8 few weeks ago, until then I didn't care any amlogic tablets at all. I need more time to learn about them
aludal said:
Can anyone with this build make some screenshots, or better video clips and post them (link) here? Of interest are:
-- 2D (GUI rendering/video decoding and rendering) hardware acceleration/performance, preferably with some comparison to stock A2.2;
Click to expand...
Click to collapse
I think 2D is not so fast due to screen size. hardware video decoding doesn't work. I didn't use stock rom well (only few days). I need to reinstall stock rom to check some things.
aludal said:
-- overal agility of the build, maybe some benchmarks;
Click to expand...
Click to collapse
I'm not sure benchmark is meaningful at this stage. anyway, I'll post 0xbench result soon.
(but some 2D/3D score may not be reliable because it reaches limit(refresh rate) easily on 0xbench)
is there any other good benchmark app? I don't like Quadrant.
http://www.glbenchmark.com/ looks nice but I need to register to get result.
i/o may be slow. I feel lags e.g. while installing app.
aludal said:
-- what doesn't work at this point?
Click to expand...
Click to collapse
I'm not sure what/how works on stock yet "work" things are listed on OP.
please write review freely, but I don't think my CM7 port is excellent further development is needed to get excellent one. I can't promise I can do it.
thank you for your cooperation!
fun_ said:
as I wrote Zenithink released 2.3 rom. and I found Pandigital Nova has 2.3.
yes, I looked up these devices myself (was actually watching Nova since August), and then there's at least 3 models of Zenithink 280.
I got my novo8 few weeks ago, until then I didn't care any amlogic tablets at all. I need more time to learn about them
Hah! I admire your speed, Sir. CM7 Team must get you as their "official" developer ASAP. (In fact, I have a vested interest in that: I run CM7 on my Nook Color since last winter, and if you ask me, they stuck on hardware acceleration for Nook)
I think 2D is not so fast due to screen size. hardware video decoding doesn't work. I didn't use stock rom well (only few days). I need to reinstall stock rom to check some things.
Screen size/pixel count, or resolution has no effect on 2D HW accelerated rendering as long as Mali400 MP's limit on pixel count is not broken. 1280x768 is well within that limit. Hardware video decoding worked quite well in stock (A2.2) for 1080p/720p quite high bitrates, so please don't lose it, LOL.
I'm not sure benchmark is meaningful at this stage. anyway, I'll post 0xbench result soon.
(but some 2D/3D score may not be reliable because it reaches limit(refresh rate) easily on 0xbench)
is there any other good benchmark app? I don't like Quadrant.
Nobody likes Quadrant. It's the Quadrant of A2.2 vs. Quadrant of CM7 that matters, on the same Ainol Novo
http://www.glbenchmark.com/ looks nice but I need to register to get result.
i/o may be slow. I feel lags e.g. while installing app.
That would be an overkill, sir.http://media.xda-developers.com/images/smilies/tongue.gif. Usual Neocore, Nenamark scores will be fine.
I'm not sure what/how works on stock yet "work" things are listed on OP.
please write review freely, but I don't think my CM7 port is excellent further development is needed to get excellent one. I can't promise I can do it.
You achieved a TON already, during last 2-3 days. Question is, can you do ALSA/Open GL ES/NEON/stagefright work at least no worse than in stock A.2.2? Original/stock FW coders struggle with it since this April and stay at A2.2 still. Yet Nova has it, but the quality of HW support is questionable.
thank you for your cooperation!
Click to expand...
Click to collapse
I will do whatever I can in support of this development. Meanwhile, you're welcome to comment on my write-up in fineoils.blogspot.com
aludal said:
I will do whatever I can in support of this development. Meanwhile, you're welcome to comment on my write-up in fineoils.blogspot.com
Click to expand...
Click to collapse
yup. at least I need to comment about motoya font
ZOPO ZP990 Specs:
Model ZP990(2+32G)
Basic parameters Support OTA update
Model ZP 990
Released Time August.2013
Form Factor Barphone
Color 16,777,216 colors
CPU cortex A7 1.5GHz Quad-Core
GPU Power VR SGX544
Processor MT6589T 1.5GHz
Keyboard Touch Screen
Touch Screen Capacitive Support Multi Touch
OS Android 4.2
Phone Size 164.3mm*83.4mm*9.2mm
Weight 0.155kg with battery
Capacity 3000 mAh Li-ion Battery
RAM+ROM 2GB+32GB
Memory Card support TFcard up to 64GB MAX
Screen Size 6.0 inch
Colors 16,777,216 colors
Contrast 1000:1
Screen Material TFT
Screen Technique OGS,LTPS
Resolution FHD(1920 x 1080)
Data application functions
Networking WCDMA+GSM
Frequency 2G:GSM 850/900/1800/1900MHz
3G:WCDMA 850/2100MHz
Date Transfer GPRS、HSPA+
Date Speed HSDPA 42.2Mbps, HSUPA 11.5Mbps
Data Interface microUSB (MHL) v2.0
Mini USB 3.5mm Stereo audio jack
GPS Yes, with A-GPS support; Google Maps
Wi-Fi 802.11 b/g/n, DLNA, Wi-Fi hotspot
Bluetooth
photographed function
Camera 13.0MP
Secondary Camera Lens 5.0MP
Aperture F/2.2
Wide Angle 71.3°
Camera Sensor CMOS
Flash Light Autofocus, LED flash
Fast Burst Camera Support
Multi-Angle Camera Support
Exposure Compensation Support Optional
ISO Support Optional
White Balance Support Optional
Exposure Value Support Optional
Color Effect Support Optional
Auto Focus Support
Photo Resolution Max support 3264*2448Pixels
PANORAMIC PHOTO Support
Multimedia entertainment
Audio Format AAC, AMR, IMY, M4A, MID, MP3, OGG, WAV
Video Format 3G2, 3GP, MP4, MPEG, AVI, RM,RMVB
Radio Stereo FM radio
Phonebook Practically unlimited entries and fields
Search Mode By name / Intelligent
Phonebook Browse By pages
Applications
Accelerometer sensor Support
Proximity sensor Support
Video call Support
Voice memo Support
e-Buddy Support
Facebook Support
Twitter Support
YouTube Support
Skype/SIP/VOIP Support
MSN talk Support
Google talk Support
Gmail Support
Pocket Office Support
Aldiko e-Book Support
Browser Support
Android market Support
Weather Support
Deskclock Support
Compass Support
Games Support
zopo zp990 (NEW HOT)
ZOPO ZP990 Specs:
Model ZP990(2+32G)
Basic parameters Support OTA update
Model ZP 990
Released Time August.2013
Form Factor Barphone
Color 16,777,216 colors
CPU cortex A7 1.5GHz Quad-Core
GPU Power VR SGX544
Processor MT6589T 1.5GHz
Keyboard Touch Screen
Touch Screen Capacitive Support Multi Touch
OS Android 4.2
Phone Size 164.3mm*83.4mm*9.2mm
Weight 0.155kg with battery
Capacity 3000 mAh Li-ion Battery
RAM+ROM 2GB+32GB
Memory Card support TFcard up to 64GB MAX
Screen Size 6.0 inch
Colors 16,777,216 colors
Contrast 1000:1
Screen Material TFT
Screen Technique OGS,LTPS
Resolution FHD(1920 x 1080)
Data application functions
Networking WCDMA+GSM
Frequency 2G: GSM 850/900/1800/1900MHz
3G: WCDMA 850/2100MHz
Date Transfer GPRS、HSPA+
Date Speed HSDPA 42.2Mbps, HSUPA 11.5Mbps
Data Interface microUSB (MHL) v2.0
Mini USB 3.5mm Stereo audio jack
GPS Yes, with A-GPS support; Google Maps
Wi-Fi 802.11 b/g/n, DLNA, Wi-Fi hotspot
Bluetooth
photographed function
Camera 13.0MP
Secondary Camera Lens 5.0MP
Aperture F/2.2
Wide Angle 71.3°
Camera Sensor CMOS
Flash Light Autofocus, LED flash
Fast Burst Camera Support
Multi-Angle Camera Support
Exposure Compensation Support Optional
ISO Support Optional
White Balance Support Optional
Exposure Value Support Optional
Color Effect Support Optional
Auto Focus Support
Photo Resolution Max support 3264*2448Pixels
PANORAMIC PHOTO Support
Multimedia entertainment
Audio Format AAC, AMR, IMY, M4A, MID, MP3, OGG, WAV
Video Format 3G2, 3GP, MP4, MPEG, AVI, RM,RMVB
Radio Stereo FM radio
Phonebook Practically unlimited entries and fields
Search Mode By name / Intelligent
Phonebook Browse By pages
Applications
Accelerometer sensor Support
Proximity sensor Support
Video call Support
Voice memo Support
e-Buddy Support
Facebook Support
Twitter Support
YouTube Support
Skype/SIP/VOIP Support
MSN talk Support
Google talk Support
Gmail Support
Pocket Office Support
Aldiko e-Book Support
Browser Support
Android market Support
Weather Support
Deskclock Support
Compass Support
Games Support[/QUOTE]
Why do you want to post twice? Also, why your information is different from http://www.zopo-mobile-shop.com/ ?
ZP990
A great device. Don't know why the existing thread all of the sudden disappeared.
If this is the official thread, any new on offical firmwares zopomobile.cn_official?
Yes where did the other thread go??
Sent from my C7 using xda app-developers app
massigann said:
Yes where did the other thread go??
Sent from my C7 using xda app-developers app
Click to expand...
Click to collapse
I think that they deleted the other thread. But why?
Can an administrator/moderator please explain what happened?
Where is the thread we could find in http://forum.xda-developers.com/showthread.php?t=2403825 ?
Threats gone ZP990 !!
jamonda said:
I think that they deleted the other thread. But why?
Can an administrator/moderator please explain what happened?
Where is the thread we could find in http://forum.xda-developers.com/showthread.php?t=2403825 ?
Click to expand...
Click to collapse
I've asked the xda people for an explaination and I received the following message:
Hi,
it looks like ost of the Zopo threads were started by a member who is now banned, so we removed those threads.
Regards
Administration
xda-developers.com
so we need to rebuild this one!!
I have some questions for this system:
I can't figure out how to connect it to my Windows 7 system,, still downloading the wrong drivers.
How to root the device.. safe way.
oops, didn't check the zopo site: http://forum.zopomobileshop.com/thread-1074-1-1.html
but I've been reading something else here which was easier to do.
so fill in the gaps please!
And I have some problems with microphone volume. people are complaining that the volume is to low.
hopefully someone will post me the answers.
Greetings from a new Zopo user..
"so we removed those threads"
Just like that? Just because this user was banned?
What about the ZP990 user who came to this thread to find info and help regarding his new phone?
JUST BECAUSE SOMEONE WAS BANNED, EVERYBODY'S PAYING A HEAVY PRICE.
Does it occur to the Administrator that this thread is (was) basically the only thread available on the whole internet for this new phone? There was really no other solution? What do we do now?
And I'm not even mentionning the Zopo official site who is far to be as helpful as this thread is (was).
Hopefully the Admin will take the user's need into consideration and will reconsider.
Why deleting a whole thread just because the user is banned?
He (or she), had amazingly simple guides for this phones, and links. Such a shame. . . I was supposed to follow one of them yesterday for upgrading firmware, now it's gone
RobbenR said:
I've asked the xda people for an explaination and I received the following message:
Hi,
it looks like ost of the Zopo threads were started by a member who is now banned, so we removed those threads.
Regards
Administration
xda-developers.com
so we need to rebuild this one!!
I have some questions for this system:
I can't figure out how to connect it to my Windows 7 system,, still downloading the wrong drivers.
How to root the device.. safe way.
oops, didn't check the zopo site: http://forum.zopomobileshop.com/thread-1074-1-1.html
but I've been reading something else here which was easier to do.
so fill in the gaps please!
Click to expand...
Click to collapse
I rooted by using only SnapPea http://dl.snappea.com/release/SnapPea_2.36.0.2265_newuser.exe
and eroot_v1.3.4.exe http://www.runamux.net/search/view/file/9fLmV0ty/ERoot-1014.html
Note: USB Debugging mode must be active on your phone.
Also, If you have antivirus it will try and block eroot when running, as it does with all root tools. I temporarily disabled it. Don't have any direct link, but it's on 4shared somewhere.
Just installed it on my W7 computer, ran it and voilá!
Well, at first SnapPea didn't fint my phone, but somehow it did eventually without me downloading any driver. just messed around with the USB settings on the phone. But I think you can find the correct windows driver here: http://www.4shared.com/zip/2af2t3I8/MT6589_drivers.html
Simplest root
Some say you only need to download the MTK driver (http://www.4shared.com/zip/ykW0IGDv/Driver.html), set phone to USB debugging mode and then run eroot (link above). No need for SnapPea.
Firmwares
Going through my log I found this: http://ajnhb5iw3h.l29.yunpan.cn/lk/QXCRdkKHzszvL
Firmware I think. Haven't installed it yet, was suposed to do that yesterday.
Another one here: http://ajewn7iqgb.l29.yunpan.cn/lk/QXGa53pdVrzMW
But I think that's older based on name (130818 [august 18th] vs 130904 [september 4th])
I think I'll follow the guide at the forum you linked to for updating SW. And looks as if it should be simple to Root using that guide as well. Although not as simple as snappea + eroot.
Borrowed from other site said:
TUTORIAL TO UPGRADE THE ZP990 NEW FIRMWARE
SOFTWARE SECTION :
What you need:
1) Pre requirements Drivers mtk 6589. properly installed for recognize from the Pc the Zopo ZP990
installed in to Pc with windows Xp is preferred.
https://www.dropbox.com/s/125r5twipm... drivers.zip
or
http://www.4shared.com/zip/ykW0IGDv/Driver.html
or
http://www.4shared.com/zip/Y_F6KBCe/...sb_driver.html
or
http://www.4shared.com/rar/5wokI0ev/...NDROID__B.html
One other way to install drivers is to Install All Drivers With the Program Snapea,
http://dl.snappea.com/release/SnapPea_2.36.0.2265_newuser.exe
2) Flashtoolvers installed in to one folder (ex. Desktop)
Pc with windows Xp is preferred :
New version of FLASHTOOL SP_Flash_Tool_v3.1316.0.150
http://www.4shared.com/zip/RHJJa ... exe_v313160150.html
3) Recovery - CWM (Clockworkmod) Only file recovery.img:
CWM recovery vers. 5504
http://www.4shared.com/file/mizPFCwo/recovery_cwm_6032_zp990.html
See the correct threads to have right root on your zp990:
http://forum.zopomobileshop.com/ ... e=1&extra=#pid10982
4) Root SuperUser version 1.51
http://www.4shared.com/zip/jLZckTwA/update-supersu-v151.html
5) FIRMWARE actual Original zp990 20130818-102950:
https://docs.google.com/file/d/0B5Hi...VFk/edit?pli=1
o
http://www.4shared.com/rar/IfnhObIG/...30818_SET.html
LAST ORIGINAL FIRMWARE Zp990_20130904_163745:
http://yunpan.cn/QXCRdkKHzszvL
https://mega.co.nz/#!r9JgAJ6I!aEjhO2ZxgqsZykyTOkvNO2Ngd5MlLquUGXGoMnCHfKU
https://docs.google.com/file/d/0B5Hi0SWKOO04Z1ptclNlZmtIOU0/edit?usp=sharing
New details :
1) Check the hours on the window eye!
2) possibility to take the call from the window eye!
STEP1 to upgrade new firmware
Unzip the drivers mtk6589.rar in a folder on your desktop
or snappea program more easy.
The first step
from the folder run the file installDriver.exe once the operation is complete
Disconnect the phone from the usb socket and insert the battery without turning it on.
Now you have the computer ready to flash the complete firmware or parts of it,
prerequisite for any operation.
Unpack the package Flashtool folder on your desktop and run Flash_tool.exe obtained (blue icon)
Inthe program to your right you will find the voice Scatter.loading click on it and find the position the folder where you extracted the package firmware:firmware zp990XXXXXXX
Android_scatter_emmc and confirmed
select all itemsfrom the menu of the program and leavechecked only thoserelating to recovery The situation will present in this way:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to download and confirm the popup that appears.
Now connect the phone OFF with battery correctly fitted to the PC USB cable.
Start 'flash process for the recovery will be some minutes.
A pop-up will give you confirmation of the operation soyou can close the program and disconnect your phone!
NOW YOU DON’T REMOVE THE BATTERY IN THIS STEP !
BECAUSE YOU MUST ENTER IN BRICK PROCEDURE!
Now you can reboot the phone pushing the power button ,
and wait for some operation that need to the phone,
and enjoy the new Firmware .
STEP2
"ONLY " to upgrade new patch for the Touchscreen.
(This procedure is very dangerous and so you do this operation for your own)
(this procedure does not protect against the brick and void the warranty)
This last firmware need to upgrade also the touchscreen firmware to obtain the right sensitivity to take the call from the cover's window eye!
1) download the application fts_upgrade:
https://docs.google.com/file/d/0B7O7_ynf-6yPaVNEUHRzcXZyMWc/edit?usp=sharing
2) copy this application in your sd and put it in the phone (zp990)
NOW IS MORE IMPORTANT:
1) RUN THIS FOLLOWS STEPS WITH THE MOUSE CONNECTED IN THE OTG CABLE
2) THE PHONE IS ON THE TABLE PERFECTLY ORIZONTAL
3) DON'T TOUCH THE SCREEN FOR ANY REASON!
CHECK THESE FOLLOWING OBJECTS
CONNECT THE OTG CABLE AND THE MOUSE
1) RUN THIS FOLLOWS STEPS WITH THE MOUSE CONNECTED IN THE OTG CABLE
2) THE PHONE IS ON THE TABLE PERFECTLY ORIZONTAL
3) DON'T TOUCH THE SCREEN FOR ANY REASON!
SEE THE ARROW (MOUSE)
3) Select and install this application trought one program like "file manager" or "root browser" or what you prefer !
4) run this application and check if this parameter is correct like the screenshot above !
The exactly and right parameters is 0x14 and 0x98
5) select with the mouse
(don't touch the screen with the hands)
the file that you want to upgrade:
file name is : ZP990_V17.bin and push start!
6) after this operation you have this follows situation :
New parameters is 0x17 and 0x98
Now the procedure is finished!
I do not take the responsibility if your phone gets bricked!
The procedure to upgrade the touchscreen is not covered by the warranty.
You make this procedure for your own .
Click to expand...
Click to collapse
Youtube-vid for firmware and flash tool: www.youtube.com/watch?v=0v_cae5p_go
(youtube is blocked where I sit now, so I can't check if it's worth having or not. But simply gathering things here now.)
Thanks FlipMorten for this tutorial.
- From which website did you took this exactly? How reliable? Did you try some by yourself?
- Also, why trying to modify the firmware of the Touch Screen?
So, here is my latest post and instruction because many users asked me via mail.
Download this pack: http://www.4shared.com/zip/ttg16QU0/RootDrivers_MT6589T.html
This is driver pack (works on W7 and W8) but could be in some case that you have to disable the digital sinature check before installing them and pack for root the device if you will install any rom which is non-rooted.
So download this and get drivers installed, then you can download my complete C7 ROM folder her:
http://www.4shared.com/zip/b-S-fbrx/7GB_Flash_20130915.html
This is the complete folder with latest ROM (rooted...means you will not need to root after flash) and the EBR Mod, to have 7 GB of internal storage after flashing, this ROM works really great and you can use for theming or things like that XPOSED Framework after flashing, everything runs like a charm!
How to flash:
Unzip this zip folder (best on desktop to find it easier) and start the SPFlashtool.exe. (make sure the drivers are installed), use the MT6589_Android_scatter_emmc.txt from my folder (Change nothing in folder!!!) and take a look, that everythink is checked! Click on download button!
Shut down the phone and take of batterie....connect the phone now with your PC using the USB Cable and wait until flash is running...when drivers will be installed, wait after connecting, in the end you will see different colored lines ins flashtool and a Green OK button will appear, now disconnect the phone and put batterin in, start and have fun with a rooted C7 incl. 7 GB of internal storage!
one of my short reviews here: http://www.youtube.com/watch?v=xzrtu1-8n0A&feature=share&list=UUe6tcx4_7-YqbJAkrYLv2Vg
Quelle: etotalk.com (ROM) needrom developer [email protected] (ROM), EBR Mod by XDA (all packed in the ROM Folder)
mrpsanter said:
Thanks FlipMorten for this tutorial.
- From which website did you took this exactly? How reliable? Did you try some by yourself?
- Also, why trying to modify the firmware of the Touch Screen?
Click to expand...
Click to collapse
I got it from zopomobileshop's forum.
I think it's reliable, as they sell this phone and have close ties to Zopo.
Modifying the touch screen is so that one can answer the phone while having the flip cover closed. Touch through the window of the s-view flip cover. Basically increasing the sensitivity or something. Not a modifification I want or need, as I don't use the flip cover - and even when I did, it wasn't any issue to open the cover to answer and then close when talking. At least not when it's so risky now. They said it might be implemented in a coming firmware.
I'm just going to upgrade the firmware
Thanks Petteri,
Is it possible for you to upload this at something else than 4Share: For some reasons I'm having a hard time to download this...
Easy root.
For those who need root. Search framaroot here at XDA. One Click apk.
Supposed to work on various devices also Mediatek 6577 and 6589.
Just rooted my mothers 6577 and its really one click, and reboot !
Thanks
Knievel
Problem with new firmware: the phone turns off by itself
I upgraded to the Zp990_20130904_163745 firmware (with the new touchscreen firmware) following the steps you can find here:
http://www.androidiani.com/forum/zopo-modding/335606-modding-zopo-zp990-capitan-s.html
The forum is in Italian, so I translated the text with Google translate. It worked fine with the s-view like cover. I also flashed the CWM 6032 for ZP990 with Mobileuncle Tools. Rooted with eroot.
However, after that my phone started to turn off by itself from time to time. I don't know the reason. So I flashed back the zp990_20130818-102950 firmware and the original recovery. No problems so far.
Did you guys have the same problem?
Use of 64 GB sd card in ZOPO ZP990
Hi all,
Happy to see you back after the original thread disappeared. I asked a question in that whether anybody use 64 GB memory card in the phone. Is it fine or any lag. I am planning to buy one for the phone.
mrpsanter said:
Thanks Petteri,
Is it possible for you to upload this at something else than 4Share: For some reasons I'm having a hard time to download this...
Click to expand...
Click to collapse
Here it is:
7GB Flash 20130915.zip (368.1 MB)
https://mega.co.nz/#!CIFmzQIK!RUTX0GCmq21FUIGlqkulxTSe3ih7b-LEAftVSZabsyI
and Drivers:
Root&Drivers_MT6589T.zip (18.8 MB)
https://mega.co.nz/#!qFciBYDJ!crrBlDOiXcpXXZbU82lyqnVsCV493CRuQTvIzddJQKM
BR Petteri
Petteri said:
Here it is:
7GB Flash 20130915.zip (368.1 MB)
and Drivers:
Root&Drivers_MT6589T.zip (18.8 MB)
BR Petteri
Click to expand...
Click to collapse
Thanks for your immediate reply.
Saw your video review of the mobile. Certainly the best of all available. Very informative. Did you encounter any ghost touches?
amddayalan said:
Thanks for your immediate reply.
Saw your video review of the mobile. Certainly the best of all available. Very informative. Did you encounter any ghost touches?
Click to expand...
Click to collapse
No, everything works really fine!
i inastalled same Apps like on my GALAXY NOTE 2, all apps works,
When you will use XPOSED Framework (for personal theming and settings), you can use these Modules (see picture):
Thanks Petteri,
I got your files.
Hello,
Really Hopeful in having your support and ideas on quite few issues!
(I hope it is OK to post links) I bought above mentioned tablet ebay co.uk/itm/121228145297
and few accessories intending to use it as Traffic Recorder(Dash Cam) and (ideally iGO SatNav application) for my travels through Europe (mainly UK)
Main specs:
Specifications:
1General
2Operating System
3Android 4.1
4CPU
5ARM(Cortex-A7) MTK8377
6GPU
7PowerVR SGX 531
8Processor Speed
91.5GHz
10RAM
111G
12Hard Drive Capacity
138GB
14Extended Memory
15Support external TF card extend up to 32GB
16Gravity Sensor
17Yes
18Flash Player
19Yes, Support Flash Player 11.1
20Display Size
217 Inch
22Display Technology
23IPS Capacitive Touch Screen
24Multi-Touch
25Yes, 5 points
26Display Resolution
271024x 600 pixels
28Camera
29Front Camera
300.3MP
31Rear Camera
322.0MP
33Flashlight
34Yes
35Connections
36Wi-Fi
37Yes, Wi-Fi 802.11 b/g/n
383G
39Yes,Built in
40LAN
41Yes,Support external USB LAN modem.
42Bluetooth
43Yes, 4.0
44GPS
45Yes,Built in
46Telephone
47 Yes,built-in 2G GSM;850/900/1800/1900MHz
48 3G WCDMA:850/2100 MHz
Click to expand...
Click to collapse
In specs and images it was posted as (will insert image later)
(all is rather optimistic and NOT what it came like!)
it appeared as(will insert image later1)
and issues with me trying (and achieving some sort of control level) there from
(will insert image later)
varied degree of success working on it gets me to (will insert image later2)
So, I have managed to disable some apps, once managed to get mobile networking connections to the 1Mobile Market and get some apps to work, but not GooglePlayStore. Most of remaining (and new apps) are not in Chinese no more, so I am very hopefull, that with rooting I'll get rid of the rest of them gremlins.
Actual specs (will insert image later3)
The questions to you Gentleman (and) Ladies:
1- Do I have to (must) root the device, so that GooglePalyStore would work? as currently, it is installed, but majority of apps are kicking some or the the sort of errors(unsupported etc), and actual GoogleStore app- "works" via Browser...
2- If yes, how do I (step by step) root it in order to have better control? (what applications( with links please) I should install for such Odyssey and what order etc please!?
3- If rooting, is it possible to Get IE 4.4.0 ROM to install?(instead of 4.1.1)- what will happen to the features of IE analogTV receiver hardware management?
4- Would it matter at all, if device is not rooted, but intended to be installed iGo Primo is packaged somehow with GooglePlay app?- will it work? or will that "modified" app work with rooted device all together? (I already learned, that IE Traffic recorder apps are only available on Google)- meaning not available for me for now...
Very many thanks for the answers and ideas in advance!
Am I wrong in believing, that particular tablet is really just a different badge wearing JXD P1000 MTK8377 tablet?
Hardware specs seem to match, as well as appearance/hardware configuration seems ever so similar, is it that daft of an idea to consider rooting and replacing ROM with one, made for JDX device?
Sent from my blueing tablet A770 using Tapatalk 2
I would like to compile Android Nougat or Oreo for my x86_64 Windows 10 Tablet. It is an 8 inch tablet made by NūVision with an x86_64 Intel Atom Processor which also acts as a GPU. Its model is TM800W610L. It has 64 bit UEFI and a Broadcom WiFi/Bluetooth card. It also has 2 cameras, 2 mics, and 2 speakers. It has 2GB LPDDR3 and 32 GB flash storage. Finally, it has 1 micro (not mini) HDMI port, 1 micro USB charging/data port, power, and volume buttons, along with a micro SD card reader. I included this very extensive description so as to better help whoever tries to answer my question.
I have run Android-x86 on the tablet before, and the following did not work:
- HDMI
- MicroSD
- Cameras
- WiFi
- Bluetooth
- Any Games
The folllowing I did not test:
- Speakers
- Mics
The following worked:
- Boot
- Display
- Touchscreen
- Volume Buttons
- Power Button
- Windows Button
- Charging
- Apps (not Games)
I also noticed that the charging indicator light would blink while using Android. If you could fix this, it would be great, but if you can’t, it’s completely okay!
I would like to do this because I hate Windows and love Android.
The features that I would like to work are:
- Speakers
- WiFi
- Bluetooth
- Games
- HDMI
- MicroSD Reader
I don’t care about:
- Cameras
- Charging Indicator
- Mics
My development computer runs ElementOS (basically Ubuntu 16.04 LTS but with a better desktop), but I can install another Linux OS on an empty HDD that I have. My development computer has an AMD A6-7800K APU installed and 8 GB of DDR3-1866 running at DDR3-2100. The instructions that I need are simply how to compile / where to download a disk image to either put on a USB thumb drive as an installer, or burn directly to the 32 GB flash memory. If I can help you in any way, please comment and I will try to get pack to you as soon as possible.
Thanks in advance!
hi man, you fixed that?
i want install android on my tablet with windows 10 too, can you help me?
my tablet is alcatel plus 10 8085
ive got a tesco connect 10 win10 tab that ui converted to Linux via this blog
http://linuxiumcomau.blogspot.com/
i know its not droid but its defo better option than win10
hope it helps
Same tab, looking for same solution
Hi,
I have the exact same tab, I tried android x86 (latest build, lineage OS, Phenix OS) on the this tab. everything else works fine except for WiFi and Bluetooth. Prime OS and Remix OS failed to boot from USB. Please let me know if you have find any solution for putting android on this tab. I can be contacted at [email protected].
Hello guys, Im new in this community, I have a RCA TABLET but i can't identify which tablet is, the tablet is software bricked, when i search on google by the model fcc id or ic, i got results of multiples tablets with the same ids.
Here the tablet Information (Pysicaly):
FCC ID: A2HRCT6773W22
IC: 9903A-RCT6773W22
CAN ICES-3(B) / NMB-3(B)
Mediatek Chipset: MT8127A
Here the tablet Information (Recovery Mode):
RCT6673W-V1MKC-ANDROID6.0-V08-V1.15.0
Here the list of tablets that aparently match with the ids of my tablet:
RCA 7 Mercury
RCA 7 Mercury Pro
RCA 7 Mercury II
RCA 7 Voyager
RCA 7 Voyager Pro
RCA 7 Voyager II
Aditional Notes:
When i was search with the id that are showed in the recovery mode "RCT6673W-V1MKC-ANDROID6.0-V08-V1.15.0", i found a exact hint of file but unfortunally the link was dead, also i found another(posibly versions with the ids) here are the versios:
RCT6673W-V1MKC-ANDROID6.0-V15-V1.15.0.zip
RCT6673W-V1MKC-ANDROID6.0-V01-V1.15.0.zip
I was downloaded both versions, but when i flash the firmware with sp flash tool of both versions, I got the error 2004 that corresponds to the download agent fails, the agent that i use(MTK_AllInOne_DA.bin), i change the agent to (DA_SWSEC.bin), and works fine, but when the flashing process ends i got several errors of security, I asuming "I'VE INSTALLING A WRONG FIRMWARE" and now not have recovery or boot, i only have died display(Not turn on), and preloader works for flash., i've check the both zip files, and inside scatter corresponds to the "RCT6673W23M".
Can you identify which tablet i have?
Have you a "stock" firmware or "not stock" but working that you can share to me?
Or any compatible firmware that you know can match with my tablet even if only run and not work the touch?
Thanks anticipated, by the answers.
RicaXOC said:
Hello guys, Im new in this community, I have a RCA TABLET but i can't identify which tablet is, the tablet is software bricked, when i search on google by the model fcc id or ic, i got results of multiples tablets with the same ids.
Here the tablet Information (Pysicaly):
FCC ID: A2HRCT6773W22
IC: 9903A-RCT6773W22
CAN ICES-3(B) / NMB-3(B)
Mediatek Chipset: MT8127A
Here the tablet Information (Recovery Mode):
RCT6673W-V1MKC-ANDROID6.0-V08-V1.15.0
Here the list of tablets that aparently match with the ids of my tablet:
RCA 7 Mercury
RCA 7 Mercury Pro
RCA 7 Mercury II
RCA 7 Voyager
RCA 7 Voyager Pro
RCA 7 Voyager II
Aditional Notes:
When i was search with the id that are showed in the recovery mode "RCT6673W-V1MKC-ANDROID6.0-V08-V1.15.0", i found a exact hint of file but unfortunally the link was dead, also i found another(posibly versions with the ids) here are the versios:
RCT6673W-V1MKC-ANDROID6.0-V15-V1.15.0.zip
RCT6673W-V1MKC-ANDROID6.0-V01-V1.15.0.zip
I was downloaded both versions, but when i flash the firmware with sp flash tool of both versions, I got the error 2004 that corresponds to the download agent fails, the agent that i use(MTK_AllInOne_DA.bin), i change the agent to (DA_SWSEC.bin), and works fine, but when the flashing process ends i got several errors of security, I asuming "I'VE INSTALLING A WRONG FIRMWARE" and now not have recovery or boot, i only have died display(Not turn on), and preloader works for flash., i've check the both zip files, and inside scatter corresponds to the "RCT6673W23M".
Can you identify which tablet i have?
Have you a "stock" firmware or "not stock" but working that you can share to me?
Or any compatible firmware that you know can match with my tablet even if only run and not work the touch?
Thanks anticipated, by the answers.
Click to expand...
Click to collapse
Trying firmware that match based on just your motherboard/CPU version, isn't enough, you need to get more specific in your selection of possible matching devices and firmware.
Do some searching to generate a list of devices that all have MT8127A chipset whether they are RCA devices or not. Once you have that list, then start researching the specifics about the devices in your list, find devices that have the same chipset, same screen resolution, same DPI, same radio, same screen size, same cameras, same internal storage size, same hardware buttons, same external USB, HDMI and audio ports(if any), etc, etc. Basically, you are looking for other devices that have virtually the same exact individual hardware components.
Then find the firmware for the devices that you have identified as having the exact same hardware components as yours and dow load the firmware files. Then start looking at what is inside each firmware file, you are looking for a firmware that has the same bootloader, same kernel, same recovery version, same modem, etc, etc..
Once you have found a device that matches hardware to hardware and matches software to software in virtually every detail, that is the firmware that you need to try.
Sent from my SM-S767VL using Tapatalk
Answer for Droidriven
Thank by your answer, exactly it is the point, my tablet have a model or fcc or ic that these six tablets have, thats why i can't identify which my tablet of these are, as you say "Trying firmware that match based on just your motherboard/CPU version, isn't enough" i already check the motherboard and have not information from there, the information that i got are from the black plastic that cover my tablet, that's why i can't specify my device because i not know.
About: "Do some searching to generate a list of devices that all have MT8127A chipset" I already do it, these devices match with my tablet in resolution, model, fcc, id, dpi, camera, but not in the internal storage, The only four tablets that match with the internal storage are:
RCA 7 Mercury
RCA 7 Voyager
RCA 7 Mercury II
RCA 7 Voyager II
The pro version of both Voyager and Mercury, have 16GB, and actually i check in sp flash tool, and my tablet have 8GB it means my tablet are one of these four not in the pro versions.
In my personal opinion, i think my tablet points more to the RCA 7 Voyager, because i was download software for the Mercury, and the software fails with matching the storage, because the storage of my tablet are "HW_storage_emmc" and the storage of the firmware that match with the mercury are "HW_storage_Nand", but the errors change all time.
But anyway i'm not sure of this, here the serial number of my tablet if is necessary:
S/N:JNGDAZ0418D5
The most strange is, the software of all voyager even the pro version, i've installed with minus errors in my tablet, but not boot anyways.
Today my tablet:
No boot
No turn on display
No enter to recovery
No bios logo
Nothing of nothing, only preloader, Do you know any method to got a more specific id from the tablet using sp flash tool or another software, that can communicate with the tablet via preloader?
Additional Notes: these four tablets have exactly the same design, and physical features with my tablet, but exist two differences my tablet have holes in the speakers that aren't circular, and these tablets have circular holes. And in the internal features, my tablet have a MT8127A and these other tablets have MT8127, but except the mercury, the mercury have the same processor "MT8127A" but not the same storage, in other words all features of both are contradictory.
Its possibly that i have a Limited Edition of tablet that are only one in the world?, because i search the serial number and i find 0 results on google.
RicaXOC said:
Thank by your answer, exactly it is the point, my tablet have a model or fcc or ic that these six tablets have, thats why i can't identify which my tablet of these are, as you say "Trying firmware that match based on just your motherboard/CPU version, isn't enough" i already check the motherboard and have not information from there, the information that i got are from the black plastic that cover my tablet, that's why i can't specify my device because i not know.
About: "Do some searching to generate a list of devices that all have MT8127A chipset" I already do it, these devices match with my tablet in resolution, model, fcc, id, dpi, camera, but not in the internal storage, The only four tablets that match with the internal storage are:
RCA 7 Mercury
RCA 7 Voyager
RCA 7 Mercury II
RCA 7 Voyager II
The pro version of both Voyager and Mercury, have 16GB, and actually i check in sp flash tool, and my tablet have 8GB it means my tablet are one of these four not in the pro versions.
In my personal opinion, i think my tablet points more to the RCA 7 Voyager, because i was download software for the Mercury, and the software fails with matching the storage, because the storage of my tablet are "HW_storage_emmc" and the storage of the firmware that match with the mercury are "HW_storage_Nand", but the errors change all time.
But anyway i'm not sure of this, here the serial number of my tablet if is necessary:
S/N:JNGDAZ0418D5
The most strange is, the software of all voyager even the pro version, i've installed with minus errors in my tablet, but not boot anyways.
Today my tablet:
No boot
No turn on display
No enter to recovery
No bios logo
Nothing of nothing, only preloader, Do you know any method to got a more specific id from the tablet using sp flash tool or another software, that can communicate with the tablet via preloader?
Additional Notes: these four tablets have exactly the same design, and physical features with my tablet, but exist two differences my tablet have holes in the speakers that aren't circular, and these tablets have circular holes. And in the internal features, my tablet have a MT8127A and these other tablets have MT8127, but except the mercury, the mercury have the same processor "MT8127A" but not the same storage, in other words all features of both are contradictory.
Its possibly that i have a Limited Edition of tablet that are only one in the world?, because i search the serial number and i find 0 results on google.
Click to expand...
Click to collapse
Then, more than likely, the only way you're going to get something to work is to modify one of the firmware files to be compatible with the amount of storage that you have. In other words, you'll have to use parts from different firmware to mix and match the software elements to create a firmware that has the correct parts that your device requires.
But, that is a bigger, exponentially more complicated headache than the tablet is worth.
Sent from my SM-S767VL using Tapatalk
Droidriven, yes and thank you, is little complicated but i will try it!
Thank you so much, it are more useful for my situation, Is possibly the firmware that i already download match to my tablet but aren't not configured the storage properly, of the before mentioned and others for these tablets, I already do it too, before, but i got some errors when i format my tablet, but in download mode work, the firmware are downloaded correctly but, not boot.
Can you explain to me which are the necessary things in a firmware to make boot a tablet or phone(android)?, i need to know it for modify all firmwares, that i already download, to make run my tablet, don't care if not works wifi or touch screen, only care for me work the display and boot the recovery mode, again. If i got do it, i can ajust all drivers again, find sources and try build again a full firmware.
But if you not know not worries, i will post a request of the firmware that i've not finded, maybe someone here in the comunity have some links...
Droidriven, Exist a generic firmware for theMT8127A that you know, and can be runned in any tablet without hardware aceleration or touch in the screen, only basic things like boot even if are slow?
or
You know which partitions are necessary to flash for make recovery mode work again, even without the partitions "system", "data" or other partitions?
Here the list of partitions that have these 6 tablets:
PRELOADER
MBR
EBR1
PRO_INFO
NVRAM
PROTECT_F
PROTECT_S
SECCFG
UBOOT
BOOTIMG
RECOVERY
SEC_RO
MISC
LOGO
EBR2
EXPDB
TEE1
TEE2
KB
DKB
FRP
ANDROID
CACHE
USRDATA
BMTPOOL
I appreciate any little help...
I have a RCA - Apollo 11 Pro on the way. Would it be useful to you if I learned how to rip the firmware so you have a few more pieces to play around with?
RicaXOC said:
Hello guys, Im new in this community, I have a RCA TABLET but i can't identify which tablet is, the tablet is software bricked, when i search on google by the model fcc id or ic, i got results of multiples tablets with the same ids.
Here the tablet Information (Pysicaly):
FCC ID: A2HRCT6773W22
IC: 9903A-RCT6773W22
CAN ICES-3(B) / NMB-3(B)
Mediatek Chipset: MT8127A
Here the tablet Information (Recovery Mode):
RCT6673W-V1MKC-ANDROID6.0-V08-V1.15.0
Here the list of tablets that aparently match with the ids of my tablet:
RCA 7 Mercury
RCA 7 Mercury Pro
RCA 7 Mercury II
RCA 7 Voyager
RCA 7 Voyager Pro
RCA 7 Voyager II
Aditional Notes:
When i was search with the id that are showed in the recovery mode "RCT6673W-V1MKC-ANDROID6.0-V08-V1.15.0", i found a exact hint of file but unfortunally the link was dead, also i found another(posibly versions with the ids) here are the versios:
RCT6673W-V1MKC-ANDROID6.0-V15-V1.15.0.zip
RCT6673W-V1MKC-ANDROID6.0-V01-V1.15.0.zip
I was downloaded both versions, but when i flash the firmware with sp flash tool of both versions, I got the error 2004 that corresponds to the download agent fails, the agent that i use(MTK_AllInOne_DA.bin), i change the agent to (DA_SWSEC.bin), and works fine, but when the flashing process ends i got several errors of security, I asuming "I'VE INSTALLING A WRONG FIRMWARE" and now not have recovery or boot, i only have died display(Not turn on), and preloader works for flash., i've check the both zip files, and inside scatter corresponds to the "RCT6673W23M".
Can you identify which tablet i have?
Have you a "stock" firmware or "not stock" but working that you can share to me?
Or any compatible firmware that you know can match with my tablet even if only run and not work the touch?
Thanks anticipated, by the answers.
Click to expand...
Click to collapse
OH WOW! THAT'S THE FILE I NEED! I haven't been able to find it: RCT6673W23M
Do you still have it?
bump