I can't find the v7 anywhere on the internet and I couldn't find a way to do that on the new v8 UI...
Please help me out (I'm using a Honor 6X - BLN-L21)
This is the path of your OEMINFO file
/dev/block/platform/hi_mci.0/by-name/oeminfo​Backup or restore whatever u want.HMT just do it for u.At the end of the day it just a copy paste nothing else
Related
hi guys
i have a huawei g6 rooted , i had a problem with voice and video call in Line and viber and ...
so i find a guide in xda that can edit the audio_policy.config and the problem solved.
after that i flash my phone and this time i replaced the audio.config file with an edited version in that post . after that my Bluetooth has a problem , i can pair it with all devices but when i want to transfer audio to them , my phone will crash and reboot
is there any body there that can give me the original audio_policy.config file .
you can find it in device memory-> etc -> audio_policy.config
and i think you need a root explorer and root device .
The phone is huawei g6_u10 with stock rom 4.3 B120
i need it very much plz help:good: .
file in attachment
it is from my phone version G6-L11 kitkat 4.4 (b370)
Thanks a lot for your help
But it doesn't work
My phone is G6_u10 in stock rom android 4.3 b120
I need help ?
so next time tell the version first
file in attachment (how I did it, downloaded full firmware file, using huawei extractor I extracted system.img and the using ext4 extractor extracted desired file)
osmera said:
so next time tell the version first
file in attachment (how I did it, downloaded full firmware file, using huawei extractor I extracted system.img and the using ext4 extractor extracted desired file)
Click to expand...
Click to collapse
thanks very much , it worked , don't have any idea how much you helped me , :good::good::good::good::good::good::good::good::good::good::fingers-crossed:
Hello there,
My first post here. It is a big forum, so I have to find my way.
Hope you can help me.
Some info:
My device is a Huawei Y550 L01.
The bootloader is unlocked and my device is rooted.
It ran Android KitKat 4.4.4 but I did install cyanogenmod 11 and it looked great.
Problems began when I installed a new boot-theme. It was booting over and over again with the new boot-theme. (bootloop).
I did several things: try to recover the back-up, try to re-install cyanogenmod 11, wiped cache, dalvik cache, system etc. Nothing worked so far. I think my phone is bricked now.
It now only boots in twrp.
So I read the thread of Dimspace:
IVE BRICKED MY PHONE!
Download the full Huawei Y550 rom from Here (You want the penultimate file - y550 build 239
Download the Huawei update extractor from the same link
Run update extractor and extract the rom
Copy the entire folder "dload" to the root of your sdcard (so there is a folder on your sd card called dload containing the update file)
Hold down all physical buttons on your phone - volume up, volume down and power at once
Click to expand...
Click to collapse
Info is very helpful :good:, but I am not sure what to do. I think I have to install the full Huawei Y550 Rom, like described above, but do not know exactly how. I downloaded the Huawei update extractor and the Y550 rom (think I need the build 246 version instead of the 239).
My question is:
- any others solutions in how to get my device working again?
- do I need to extract the Update.app file, which is in the Huawei Y550 rom, before putting it in the dload folder of my sd-card?
I can see the files with the Huawei update extractor. Do I have to extract those files and afterwards transfer the files (in the dload folder) to the sd-card?
Dajoh59 said:
Hello there,
My first post here. It is a big forum, so I have to find my way.
Hope you can help me.
Some info:
My device is a Huawei Y550 L01.
The bootloader is unlocked and my device is rooted.
It ran Android KitKat 4.4.4 but I did install cyanogenmod 11 and it looked great.
Problems began when I installed a new boot-theme. It was booting over and over again with the new boot-theme. (bootloop).
I did several things: try to recover the back-up, try to re-install cyanogenmod 11, wiped cache, dalvik cache, system etc. Nothing worked so far. I think my phone is bricked now.
It now only boots in twrp.
So I read the thread of Dimspace:
IVE BRICKED MY PHONE!
Download the full Huawei Y550 rom from Here (You want the penultimate file - y550 build 239
Download the Huawei update extractor from the same link
Run update extractor and extract the rom
Copy the entire folder "dload" to the root of your sdcard (so there is a folder on your sd card called dload containing the update file)
Hold down all physical buttons on your phone - volume up, volume down and power at once
Click to expand...
Click to collapse
Info is very helpful :good:, but I am not sure what to do. I think I have to install the full Huawei Y550 Rom, like described above, but do not know exactly how. I downloaded the Huawei update extractor and the Y550 rom (think I need the build 246 version instead of the 239).
My question is:
- any others solutions in how to get my device working again?
- do I need to extract the Update.app file, which is in the Huawei Y550 rom, before putting it in the dload folder of my sd-card?
I can see the files with the Huawei update extractor. Do I have to extract those files and afterwards transfer the files (in the dload folder) to the sd-card?
Click to expand...
Click to collapse
Solved this problem, after reading the thread "Everything Huawei Y550". There is a lot of information.
Here is what I did:
I downloaded the stock rom (build 246) to my pc. Extracted it and copied the dload folder with the update app to my sd-card: I extracted only the folder, not the update.app. Then did a forced update by holding both volume buttond and the power-on button. Released the power button after the huawei logo was coming up and after i saw the progression bar (for installing the rom) i released the volume buttons. Worked very good, thanks to the people in the "Everything Huawei Y550" forum.
Hi
I Think the title says it all ....
so here is my problem
I have the L29C900B133 update.app file And I want to be able to flash it via TWRP
This Rom is the most complete Rom till today for mate 8 and I think flashing it will solve my problems including applying themes and missing vendor
So please help
How can I make a flashable zip file using this update.app file ??
If there is any method please let me know or send a link
And Before anyone says anything i already looked in huawei update extractor and using it you can make flashable zip files but huawei mate 8 partition map is not available yet and i'm afraid that if i use mate 7 partition map it will brick my phone
tnx in advance
Hello,
Can someone tell me if someone has already developed an OEMINFO file for 6x honor?
I need this to do a 100% debrand phone.
Mitlex said:
Hello,
Can someone tell me if someone has already developed an OEMINFO file for 6x honor?
I need this to do a 100% debrand phone.
Click to expand...
Click to collapse
i have same problem . i have BLN-L21c185 model rooted .
but if u have indian version or asian version model so upload the oeminfo
I have Bln AL10 i need oeminfo for bln L21
Mitlex said:
I have Bln AL10 i need oeminfo for bln L21
Click to expand...
Click to collapse
Here the oeminfo file of BLN-L21c185
I need oeminfo of bln-l22c675
---------- Post added at 02:09 PM ---------- Previous post was at 02:04 PM ----------
8109930082 said:
Here the oeminfo file of BLN-L21c185
Click to expand...
Click to collapse
Just go for rebranding and share the result
Ok, so i need now files to downgrade my android. From android 7.0 to android 6.0 on BLN-AL10
Moreover i need custom.bin from this rom BLN-L21c185
Mitlex said:
Moreover i need custom.bin from this rom BLN-L21c185
Click to expand...
Click to collapse
Make it using notped++ app or if not work use Huawei multi tool make backup your oeminfo and r go backup folder replace the file with ieminfo of l21 and restore bakup and share your result
Sent from my HUAWEI KIW-L22 using XDA Labs
Mitlex said:
Moreover i need custom.bin from this rom BLN-L21c185
Click to expand...
Click to collapse
Yes , rebranding is simple just new only 2 thinks for us 1.OEM info 2.Custom version Bin of which device you want to go.
If Anypost Post the info I will Make A complete gudie thread To rebrand :good:
Hi uplod oeminfo of bln-l22c675 indian version
Sent from my HUAWEI KIW-L22 using XDA Labs
If somebody can help me with full rebrand my phone, i have BLN-AL10 nougat 7.0, tell me all steps to do this ok?
Backup OEMinfo Tool [Root]
To backup OEMinfo you can use this simple tool: here
Steps:
Part I:
- Enable USB debugging and connect to PC, then authorize debugging.
- Unzip the zip file
- Run the .bat file
- Give root permissions on the mobile when the notice comes out (the program will create a simple zip inside the folder with the OEMinfo).
Part II:
- Once you have the file OEMinfo.img, download the attached Template.zip, unzip and insert the OEMinfo.img,
- Then compress the META-INF and OEMinfo.img files in zip format.
- Now you will be ready to flash through TWRP (obviously you must have the Update.APP corresponding to the OEMinfo to install with the three button method).
Source: Here
Mitlex said:
Moreover i need custom.bin from this rom BLN-L21c185
Click to expand...
Click to collapse
here is custum.ini
cronociclope said:
To backup OEMinfo you can use this simple tool: here
Steps:
Part I:
- Enable USB debugging and connect to PC, then authorize debugging.
- Unzip the zip file
- Run the .bat file
- Give root permissions on the mobile when the notice comes out (the program will create a simple zip inside the folder with the OEMinfo).
Part II:
- Once you have the file OEMinfo.img, download the attached Template.zip, unzip and insert the OEMinfo.img,
- Then compress the META-INF and OEMinfo.img files in zip format.
- Now you will be ready to flash through TWRP (obviously you must have the Update.APP corresponding to the OEMinfo to install with the three button method).
Source: Here
Click to expand...
Click to collapse
But i need do Rollback to MM? yes? so can you tell me how do it on BLN-AL10? Have you files?
Mitlex said:
But i need do Rollback to MM? yes? so can you tell me how do it on BLN-AL10? Have you files?
Click to expand...
Click to collapse
The program (Backup OEMinfo Tool) works on both EMUI 4.1x and EMUI 5.
Okay so i need oeminfo for nougat? Because the user share files for MM. Remmember i want do debrand
@gopinaidu77 , bro please check and guide. He has the OEMinfo file and need further help
shashank1320 said:
@gopinaidu77 , bro please check and guide. He has the OEMinfo file and need further help
Click to expand...
Click to collapse
Oh well , basically he should say that which model he wants to rebrand and to which model !!
shashank1320 said:
@gopinaidu77 , bro please check and guide. He has the OEMinfo file and need further help
Click to expand...
Click to collapse
Which country oeminfo is that ?
gopinaidu77 said:
Which country oeminfo is that ?
Click to expand...
Click to collapse
Let him respond. I just tagged you (expert) to help him
Hello Guys,
I have the european Version of the Honor 6x. After flashing a custom rom I wanted to come back to Stock Emui. But now I have a few problems with my Honor device. In the settings it isn't called Honor 6x any more, but generic-a15.
A huge part of the build.prop got lost so many things like f.e. the camera or the loudspeekers do not work any more.
Could someone maybe share the stock build.prop with me, so that I can solve at least one of the problems?
Thanks
In this case, the build.prop won't be helpful. You gotta flash the version.img of your actual firmware through fastboot or TWRP.
You can extract the version.img file with Huawei Update Extractor tool. You have to pull it out from the biggest update package that weights something like 1,49GB, usually "update.zip".
RedSkull23 said:
In this case, the build.prop won't be helpful. You gotta flash the version.img of your actual firmware through fastboot or TWRP.
You can extract the version.img file with Huawei Update Extractor tool. You have to pull it out from the biggest update package that weights something like 1,49GB, usually "update.zip".
Click to expand...
Click to collapse
Yeah the thing is, huawei wont publish the firmware online anymore, if you try to find the img in the net you cannot find it at all
Huawei did that, true, but luckily there is another site on which all the update packages are uploaded. Just look for yours here http://pro-teammt.ru/firmware-database/ you only have to write your build number and grab the file.
I messed up my build.prop with some "tweaks" (Thanks Zack. They don't work at all.). so could somebody else provide an original build.prop for BLN-L21? Thanks in advance.