[ ROM] [V2.2][Stable]MIUI for Gionee P5 Mini By PrashannaGP

[ ROM] [V2.2][Stable]MIUI for Gionee P5 Mini By PrashannaGP - Miscellaneous Android Development

#include
/*
Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
MIUI ROM FOR Gionee P5 Mini
WORKING
-Camera
-WIFI/BLUETOOTH/RADIO
-LOUD SOUND [viper4randroid:- Installed]
-...........EveryThing else
BUGS/ changes
-Fixed SMS BUG
-Fixed lags 95%(Disable developer option and go to performance setting and tick on every thing.
-Added New features
-Smooth MIUI
-Other bugs not found.
Working on V2.3 and will get new updates from this app from now onwards!
DOWNLOADS
ROM Link:-Download
GAPPS - Download From Here
[ SELECT ARM , ANDROID 5.1, NANO or MINI, (I PREFER NOT TO CHOOSE PICO, FULL, MICRO, AROMA)]
State-Rooted, Busybox
{U CAN GET IT ON GOOGLE OR XDA}
SCREENSHOTS
BELOW:good:
XDAevDB Information
MIUI ROM LP V2.1/2, ROM for all devices (see above for details)
Contributors
Mysteger for kernel Source Here
PrashannaGP [OP]
ROM OS Version: 5.1.x Lollipop
Based On: AOSP/CM-12
Version Information
Status: Stable V2.2
Created 2019-03-23
Last Updated 2020-05-06
Installation direction
1)Root with KingoRoot
2)flash Twrp :-Download From here
3)Boot to Recovery: -Volume up + Power Button
4)Clear Data, cache, Dalvix, System {Except Internal + SD Card}
5)Flash from Install
6)Reboot
7)Done
Click to expand...
Click to collapse
Report Dead Links
XDA:DevDB Information
[ROM-MIUI][Stable V2.2] For Gionee P5 Mini/ Primo GH5 mini, ROM for the Android General
Contributors
PrashannaGP
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: MIUI Themed based on AOSP/CM-12
Based On: AOSP, CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2.2
Stable Release Date: 2020-05-02
Created 2020-04-12
Last Updated 2020-05-03

Can't receive text messages
Text messages are not receiving in this ROM!

umjoshua said:
Text messages are not receiving in this ROM!
Click to expand...
Click to collapse
The System is soo much easy to fix.
Just search message center for your country and add the number to
Code:
*#*#4636#*#*
THEN go to phone information and at the bottom add that number and press update.
That's all to do.
And If not working Again then just check if there is showing INVALID IMEI no. In
Code:
*#06#
AND THAT'S ALL
Sent from my [device_name] using XDA-Developers Legacy app

PrashannaGP said:
The System is soo much easy to fix.
Just search message center for your country and add the number to
Code:
*#*#4636#*#*
THEN go to phone information and at the bottom add that number and press update.
That's all to do.
And If not working Again then just check if there is showing INVALID IMEI no. In
Code:
*#06#
AND THAT'S ALL
I tried everything. But not working.
Click to expand...
Click to collapse

umjoshua said:
I tried everything. But not working.
Click to expand...
Click to collapse
Okay Let say you to do a clean flash. Dirty flashing hadn't worked for you so you have to follow these steps.
1)Reboot to recovery
2)wipe system, data, cache, dalvik cache. not internel nor sd card.
3)flash the rom i had given you above
4)Do not reboot directly.
5)Again wipe data, dalvik cache and cache
6)Then Reboot
7)Wait for 7 to 10minutes
8)Now go to message and then its setting.
9)Insert your smsc number in message center.
10)Reboot Twice.
Thats all
If not working again then I am working on its upgrade version and will fix this soon
But these problems are not present in my device though.
Try above stuffs carefully.
ALso Try
setting/Mobile Networks/APN
And manually add your apn according to sim providers official websites.

Changes LOGS
V2.21)Fixed SMS problem
2)Clean MIUI
3)Faster Than V2.1
4)More Functions
V2.1==Little Buggy

PrashannaGP said:
Okay Let say you to do a clean flash. Dirty flashing hadn't worked for you so you have to follow these steps.
1)Reboot to recovery
2)wipe system, data, cache, dalvik cache. not internel nor sd card.
3)flash the rom i had given you above
4)Do not reboot directly.
5)Again wipe data, dalvik cache and cache
6)Then Reboot
7)Wait for 7 to 10minutes
8)Now go to message and then its setting.
9)Insert your smsc number in message center.
10)Reboot Twice.
Thats all
If not working again then I am working on its upgrade version and will fix this soon
But these problems are not present in my device though.
Try above stuffs carefully.
ALso Try
setting/Mobile Networks/APN
And manually add your apn according to sim providers official websites.
Click to expand...
Click to collapse
Sir I tried it.. But still the same...
Can you solve it in the next version?

umjoshua said:
Sir I tried it.. But still the same...
Can you solve it in the next version?
Click to expand...
Click to collapse
fixed update from above link

@PrashannaGP
Urgent. Please see your PM inbox

Related

[ROM][6.0][UNOFFICIAL] CyanogenMod 13.0 | Skyrocket [12-17-16]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
This is an unofficial CyanogenMod 13.0 Marshmallow ROM. This is currently a work-in-progress, so you can expect to run into problems while using it.
Working:
Modem / RIL
Data
WiFi
GPS
NFC
SD Card
Audio
Camera
Bluetooth
Sensors
Video
Issues:
You tell me
Credits:
CyanogenMod
Google / AOSP
CAF
sultanxda
And others
Downloads:
NOTE: You must virtually repartition your device, otherwise you cannot install this ROM! See the 2nd post for details.
ROM: https://www.androidfilehost.com/?w=files&flid=76548
Recommened GApps: http://opengapps.org (Stock or Aroma package recommended)
TWRP recovery updates*: https://androidfilehost.com/?w=files&flid=40575
View http://www.cmxlog.com/13/ for current changes.
Full changelog including device-specific changes can be found HERE.
*You must have completed the repartitioning process in order to install the TWRP recovery updates.
XDA:DevDB Information
[UNOFFICIAL] CyanogenMod 13.0, ROM for the AT&T Samsung Galaxy S II Skyrocket SGH-I727
Contributors
bryan2894
Source Code: http://github.com/bryan2894
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Latest Radio Firmware + Recovery
Version Information
Status: Stable
Created 2015-11-11
Last Updated 2016-12-17

Installation Instructions
NOTE: If you repartitioned your phone using a pit file, its recommended that you flash back the original unmodified pit to take full advantage of the increased space.
Latest official TWRP recovery: http://forum.xda-developers.com/showthread.php?t=1622917
Virtual Partition TWRP recovery
TWRP 3.0.2: https://www.androidfilehost.com/?fid=24545070682210374
From another non-virtual partitioned ROM:
Make sure you have the latest OFFICIAL TWRP installed.
Backup current ROM if desired
Back up EVERYTHING on your internal SD card to your computer (the internal SD card WILL BE ERASED in the next step).
In TWRP, go to Wipe -> Advanced Wipe -> check Internal Storage -> press on "Repair or Change File System" -> press on "Change File System" -> press on "EXT4", and then swipe to start formatting the internal SD card. This can take up to a minute.
Wipe Data, Cache and System.
Copy the newest version of my TWRP recovery to your device and flash it.
After that is finished, go back to the main menu, then go to Reboot and press on Recovery.
Once the device has rebooted back into TWRP recovery, goto mount then uncheck and recheck data.
Copy and flash the new ROM and your GApps package to your device and flash
Reboot system
Connect your phone to your computer and copy back your backed-up internal SD card data to the internal SD card.
Repartitioning is completed. Enjoy your 8GB of additional app storage space.
From CM12.1 or another virtual partitioned ROM:
Factory reset (to avoid problems)
Flash ROM and GApps
Updating to a newer version:
Just flash ROM and reboot.

Trying this tomorrow. Thank you

So I have to partition my phone to run this?

zappa41 said:
So I have to partition my phone to run this?
Click to expand...
Click to collapse
Yes virtual partition. Follow the instructions in the second post.
Sent from my LG-D851 using Tapatalk

bryan2894 said:
Yes virtual partition. Follow the instructions in the second post.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
@bryan2894 - I appreciate all your hard work and really would like to help test this, but I can't realistically do so. My skyrocket is my daily driver, so I can't repartion to test this ROM, then repartition back to original to use my more-or-less stable Lollipop, the repartition to test the next version of your ROM, ... I do not think I can go back to another ROM after doing the virtual repartition, without undoing the virtual repartition each time, right? (I never tried Sultan's Lollipop with virtual re-partitioning, for much the same reason.)

@bryan2894 Tried installing twice last night,phone booted up too a screen talking about encryption error..cannot finish install. Says hit reset button at bottom of page to do a factory reset and try again. Hitting reset takes you back too recovery.

It failed to install twice for me

Got it to flash and boot up but wasn't able to flash 6.0 gapps in twrp it says no build.prop. tried micro and pico still no go. The rom was smooth just no gapps.

Great ROM so far. The only thing I can't get to work is calling someone. Every time it says Cellular network is unavailable. Any ideas how to fix

zappa41 said:
Great ROM so far. The only thing I can't get to work is calling someone. Every time it says Cellular network is unavailable. Any ideas how to fix
Click to expand...
Click to collapse
Read the OP. It says RIL isn't working right now.

zappa41 said:
Great ROM so far. The only thing I can't get to work is calling someone. Every time it says Cellular network is unavailable. Any ideas how to fix
Click to expand...
Click to collapse
Ok, I should have a fix for that next release.
Sent from my LG-D851 using Tapatalk

bryan2894 said:
Ok, I should have a fix for that next release.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
Awesome,thank you bud. Not to be a pain but when is the next release? I love this ROM so far:thumbup:

Steveromingagain said:
@bryan2894 Tried installing twice last night,phone booted up too a screen talking about encryption error..cannot finish install. Says hit reset button at bottom of page to do a factory reset and try again. Hitting reset takes you back too recovery.
Click to expand...
Click to collapse
From another rom they had booting but then it would reboot at start up.
If you're getting a bootloop at the initial setup wizard
Remove this folder with TWRP:
/system/priv-app/com.qualcomm.location/

New build is up. The issue with receiving calls should be resolved

bryan2894 said:
New build is up. The issue with receiving calls should be resolved
Click to expand...
Click to collapse
Just flashed. Incoming calls works great. ROM is bitter smooth but, still can't make calls. Still says "mobile network unavailable". Anyway I can fix this myself?? Other than that, GREAT ROM!!

zappa41 said:
Just flashed. Incoming calls works great. ROM is bitter smooth but, still can't make calls. Still says "mobile network unavailable". Anyway I can fix this myself?? Other than that, GREAT ROM!!
Click to expand...
Click to collapse
I reset APNs and still can't make outgoing calls. Just letting you know. Other than that keep up the good work

I was searchin around my phone and I looked in sim info and I see that the "Cellular Network State" says its disconnected. What is this about,is this why I can't make phone calls? Thanks

@bryan2894 any luck on a fix for making calls

this rom is awesome!! smooth....and clean
two problems tho.. whan i try to change to preferrd network it stays on WCDMA preferrd.. cant change it to GSM or anything else for that metter.. and the secent problem is whan i go to the network operators its FC (the process com.android.phone has stoped)

[ROM][UNOFFICIAL] LineageOS 14.1 for Galaxy S4(GT-I9515)

// Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
// Info
It's unnoficial LineageOS14.1 for Galaxy S4 Value Edition (GT-I9515).
I strongly recommend to perform a backup of your current rom before installation.
// Install
Recommend: Rooted device with custom recovery like (TWRP 3.X.X)
Installation process from stock rom
Build from xx.xx. and Gapps from xx.xx. to the external SD
Installation Procedure :
coming from stock ....
TWRP - Odin flashable (I use Odin 3.12)
01. I take the battery out now, then battery in again and off into the download mode.
02. flash TWRP with Odin (comes in AP). The hooks at Auto Reboot and F. Reset Time out.
03. disconnect USB cable after flash, battery out and in again.
04. boot into recovery -> Allow Modifications
05 Advanced Wipe: Dalvik/ART Cache, System, Data, Internal Storage, Cache (lasts a while)
06. install -> select lineage image, then add more zips and gapps, then flash
07. patching system image unconditionally runs through with progress bar
08 Open Gapps are flashed, progress bar runs through
09. when done, tap reboot system, Swipe to install TWRP app (or not, if you don't need it)
10th reboot
11. Lot 14.1 boots. (quite a while ^^)
12. type through the facility
13. ready
- make a full Backup from your device
- Full wipe device (system, data, cache, dalvik)
- Install your Build
- Install Gapps (ARM Pico or Nano)
- Wipe Cache and Art/Dalvik
- Reboot
- Wait for 1st boot
- Enjoy
install magisk from here
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
LineageOS Extras
- addonsu-14.1-arm-signed.zip
- addonsu-remove-14.1-arm-signed.zip
*for those who have problems with the automatic update
*automatic update for Galaxy S4 Jfvelte (GT-I9515)
// Partners & Friends for German
https://android-freaks.de/forum/thread/47-rom-unofficial-samsung-galaxy-s4-gt-i9515-lineageos-14-1/
// OTA
https://www.los-legacy.de/14.1/jfvelte
update: monthly
// TWRP 3.1.1.0/Baseband-Bootloader
https://www.androidfilehost.com/?w=files&flid=143398
// TWRP 3.2.3.0/Baseband-Bootloader
[RECOVERY][OFFICIAL] TWRP 3.2.3-0 [jfvelte]
// Thanks / Credits
Code:
* CM team, Omni team
* XDA developers
* Everyone who has contributed to CM on S4
* syphyr and NucWin for their previous work
* Many thanks to invisiblek
//Info Exodusnick is currently taking over Benlue work
Code:
[B][U]!!!since some users have already asked me about new features!!![/U][/B]
Since it is a pure Lineageos version.
and not as optimized as e.g. side build.
All I do is keep your phone up to date.
and if errors occur, they are fixed after each update
[B][U]I hope you understand that I don't make any changes to the version
[/U][/B]
// Donate Us
PayPal.Me
// Source Code
Framework: LineageOS
Kernel: jfvelte-dev
XDA:DevDB Information
[ROM][UNOFFICIAL] LineageOS 14.1 for Galaxy S4 (GT-I9515), ROM for the Samsung Galaxy S4
Contributors
BenLue, Exodusnick
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-09-19
Created 2017-01-08
Last Updated 2020-07-25

Reserved

Reserved

thanks <3

Great work, but no sim detected..

Thank you :good:
Thank you @BenLue for keeping device updated (alive).
God bless you.

is possible Dirty Unicorns 11? is the best rom

gasc said:
is possible Dirty Unicorns 11? is the best rom
Click to expand...
Click to collapse
Please contact Dirty Unicorns 11 Dev´s
Greetings
Ben

All works or there are some bugs?
Thanks!!!

mickdroid94 said:
All works or there are some bugs?
Thanks!!!
Click to expand...
Click to collapse
Yes, it have not sim detected error.

hknsvm said:
Great work, but no sim detected..
Click to expand...
Click to collapse
Uhm sorry for this Issue, i cant reproduced the No Sim Detected Error!
Please make sure:
Rom Clean install
your Sim Card Slot is clean
Greetings
Ben

BenLue said:
Uhm sorry for this Issue, i cant reproduced the No Sim Detected Error!
Please make sure:
Rom Clean install
your Sim Card Slot is clean
Greetings
Ben
Click to expand...
Click to collapse
Thank you
I tried but it have same problem.
No problem when installing another rom

BenLue said:
Uhm sorry for this Issue, i cant reproduced the No Sim Detected Error!
Please make sure:
Rom Clean install
your Sim Card Slot is clean
Greetings
Ben
Click to expand...
Click to collapse
:crying: BUG >
No Sim Detected > baseband unknown

I will give it a try and report if there's a SIM bug or not.
E: Didn't work, now I'm going to try the ROM by sombree

droidfuture said:
:crying: BUG >
No Sim Detected > baseband unknown
Click to expand...
Click to collapse
Its possible to test an different Baseband?
Greetings

unimetal said:
I will give it a try and report if there's a SIM bug or not.
E: Didn't work, now I'm going to try the ROM by sombree
Click to expand...
Click to collapse
I use sombree rom, The rom good work but have some bugs. Sometimes doesn't work camera..

BenLue said:
Its possible to test an different Baseband?
Greetings
Click to expand...
Click to collapse
yes, tested >
ANJ1 4.4.2
BOJ1 5.0.1
BPI1 5.0.1
ANC1 4.4.2
All Wipes.
My model has L without end
GT-i9515L Is that it?

droidfuture said:
yes, tested >
ANJ1 4.4.2
BOJ1 5.0.1
BPI1 5.0.1
ANC1 4.4.2
All Wipes.
My model has L without end
GT-i9515L Is that it?
Click to expand...
Click to collapse
droidfuture, -> GT-I9515L <- is not GT-I9515 (Jfvelte) Value Edition

This thread is in the wrong xda section. It should be in i9515 instead of i9505.

lineage-14.1-20170109-UNOFFICIAL-jfvelte.zip

[Rom] Official Lineage OS 14.1 for Falcon

Lin·e·age
/ˈlinēij/
noun
1.lineal descent from an ancestor; ancestry or pedigree.
2.a sequence of species each of which is considered to have evolved from its predecessor.
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Download & Install
LINKs:
Rom
Changelog
OpenGapps choose ARM>7.1>micro/nano/pico (micro might still be too big... unless you use the custom install options that allows you not to install everything from the package)
REMEMBER:
ONLY use TWRP 3.0.2-1 or upHOW TO INSTALL
Requirements: Unlocked Bootloader, a Nougat compatible Custom Recovery and the Downloaded Zips.
1.Place the rom and other like Gapps on the internal Storage or on a USB OTG
2.Reboot to recovery using the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
3.Do Wipes (Data, Cache, Dalvik and System partitions) if you are in a different ROM.
4.Select the Zips
5.Swipe to install (if using TWRP)
6.Reboot and wait 2-3 min
Flash This to have system root access
READ POST 2 BEFORE FLASHING
XDA:DevDB Information
[Rom] Lineage OS 14.1 for Falcon, ROM for the Moto G
Contributors
Allstargaurav
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
ROM Firmware Required: CyanogenMod13
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2017-01-21
Last Updated 2017-01-26

HOW TO DIRTY UPDATE
1.Download the rom zip
2.Reboot to recovery using the power menu or the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
3.Do Wipes (Cache, Dalvik)
4.Flash the Zip(No Need To flash Gapps)
5.Reboot and wait 2-3 min
HOW TO CLEAN UPDATE :
1.Download the rom zip and make sure you have gapps zip on your device
3.Reboot to recovery using the power menu or the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
5.Format /system, /cache and /dalvik-cache (advance format in wipe menu of TWRP); do NOT Wipe DATA
6.Install zip
7.Reboot and wait 2-3 min
EXPERIMENTAL:-This build will allow you to ‘upgrade’ from CM to the signed LineageOS weekly
How To install EXPERIMENTAL
1.Download experimental and nightly zip
2.Boot into Recovery
3..Install experimental migration build on top of cm-14.1 build
4.Reboot
5.Install LineageOS weekly build
6.Reboot
7.Re-setup your application permissions

You might want to state that this is not the official version. There might be a bit of confusion otherwise because official builds will be available this weekend.

ahmad.o said:
You might want to state that this is not the official version. There might be a bit of confusion otherwise because official builds will be available this weekend.
Click to expand...
Click to collapse
Is it Better Now

It's better to put unofficial tag in title too. Not just as announcement. People might not notice it.
Edit: Just saw your edit.

Please ask a moderator to post it on the android development, doesn't belong here.

Aayushya said:
Please ask a moderator to post it on the android development, doesn't belong here.
Click to expand...
Click to collapse
I will make this Offical Lineage thread as soon as weekly starts rolling

Lineage based on aosp?

Any screenshoots?

Pierre2324 said:
Lineage based on aosp?
Click to expand...
Click to collapse
its more cm based

Great?

Testing. So far so good.

Just installed on xt1032 and looks amazing! Does this get OTA? Or do I have to flash new roms?

What about ram usage Nougat seems bad always low ram on every rom

Pierre2324 said:
What about ram usage Nougat seems bad always low ram on every rom
Click to expand...
Click to collapse
to me is about 240 mb free, anyway nougat runs very well

Wifi sometimes turn down. This is unique bug I found

Working without issues here. :good::good::good:

fix for bluetooth pairing?

Reserved...

Is the op actually a contributor or just putting the thread up?

[ROM][7.1.2][12/05/2018] CodeOfHonor's AOSPA Paranoid v7.3.1 for Huawei P8 Lite 2017

Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.
Source Code:
Device Tree:
https://github.com/codeofhonor-dev/android_device_huawei_hi6250
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Huawei P8lite/P8 Lite
Contributors
haky 86, Meticulus
Source Code: https://github.com/hak86/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-02-09
Created 2018-02-09
Last Updated 2018-02-08

ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.

Thank you for your awesome work! AOSPA is my fking favorite ROM.

NetfariousIntent said:
Thank you for your awesome work! AOSPA is my fking favorite ROM.
Click to expand...
Click to collapse
glad to hear that
I'll post in p9 lite and honor 6x sections later
here a screenshot of my friend that run on his p10lite and have almost 19%..

it is stable? can i try it?
---------- Post added at 09:44 AM ---------- Previous post was at 09:05 AM ----------
stuck at installing the rom. it says tested fir you p8 lite 2017 by haky86....... and it doesnt move at all

karasoulas said:
it is stable? can i try it?
---------- Post added at 09:44 AM ---------- Previous post was at 09:05 AM ----------
stuck at installing the rom. it says tested fir you p8 lite 2017 by haky86....... and it doesnt move at all
Click to expand...
Click to collapse
sounds like you didn't use my recovery.
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP

haky 86 said:
sounds like you didn't use my recovery.
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP
Click to expand...
Click to collapse
yup. works. i dont know why man. but the stock rom is faaaaar faster than ur roms. Not trying to be rude i love ur work but i dont know. maybe iim doing something wrong?

** Note **
**11/02/2018**
pa_hi6250-7.3.1-EOL-20180210.zip
Changelogs:
**11/02/2018**
possible fix for ril crashes

Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?

atsmurat said:
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
Click to expand...
Click to collapse
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated

sys01 said:
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
Click to expand...
Click to collapse
Was happening to me until I flashed Gapps aroma with the new dialer and stuff. now everything works smoothly :/

atsmurat said:
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
Click to expand...
Click to collapse
sys01 said:
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
Click to expand...
Click to collapse
some devices require the following flags in build.prop ;
ro.config.client_number=2
rild.libargs1=-m modem1
rild.libpath1=/vendor/lib64/libbalong-ril-1.so
rild.libpath=/vendor/lib64/libbalong-ril.so
rild.libargs=-m modem0
save and reboot, should fix the problem then.
NetfariousIntent said:
Was happening to me until I flashed Gapps aroma with the new dialer and stuff. now everything works smoothly :/
Click to expand...
Click to collapse
I use pico, always.

Sim keep disconnecting itself

It gives error while saving the finger print, both in this and the slim rom

atsmurat said:
It gives error while saving the finger print, both in this and the slim rom
Click to expand...
Click to collapse
Did you erase all of your fingerprints in stock ROM before flashing?
If not, flash elite ROM, erase fingerprints, and then flash this/slim back

CarlosAG10 said:
Did you erase all of your fingerprints in stock ROM before flashing?
If not, flash elite ROM, erase fingerprints, and then flash this/slim back
Click to expand...
Click to collapse
İ didnt erase fingerprints in Omni ROM . From that ?
Where is Elite Rom ?

haky 86 said:
some devices require the following flags in build.prop ;
ro.config.client_number=2
rild.libargs1=-m modem1
rild.libpath1=/vendor/lib64/libbalong-ril-1.so
rild.libpath=/vendor/lib64/libbalong-ril.so
rild.libargs=-m modem0
save and reboot, should fix the problem then.
I use pico, always.
Click to expand...
Click to collapse
Noto solve the SIM from disconnecting itself

Wire1122 said:
Noto solve the SIM from disconnecting itself
Click to expand...
Click to collapse
I will do a test-build post dinner, I fix the problems around here a few weeks ago on some roms!

Have You found the bug? I really want use your rom for Daily use.

** Note **
**13/02/2018**
pa_hi6250-7.3.1-EOL-20180213.zip
**13/02/2018**
Fix RIL crashes.
How to fix RIL Crashes?
Follow this post

[ROM][7.1.2] AOSPA Paranoid v7.3.1 for Honor 6x

Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
This ROM is provided by CodeOfHonor
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.
Source Code:
Device Tree:
https://github.com/codeofhonor-dev/android_device_huawei_hi6250
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Vendors:
https://github.com/codeofhonor-dev/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Honor 6X
Contributors
haky 86, HassanMirza01, felix-development
Source Code: https://github.com/codeofhonor-dev, Meticulus and the stuff of CodeOfHonor.
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-04-27
Beta Release Date: 2018-04-27
Created 2018-04-27
Last Updated 2018-04-27

I'm coming from EliteRom 7.5 and I love AOSPA but there are 2 little problems I have with this rom.
First of all fingerprint doesn't work correctly, no matter how often I press my finger on the sensor it stays at the ~10% mark.
The other problem is that I don't know how to root this rom. I tried installing magisk manager and flashing the zip but I get error 1 in TWRP.
Except this issues it's working very nicely on my device.
Thanks in advance for helping me out

MadMurl0c said:
I'm coming from EliteRom 7.5 and I love AOSPA but there are 2 little problems I have with this rom.
First of all fingerprint doesn't work correctly, no matter how often I press my finger on the sensor it stays at the ~10% mark.
The other problem is that I don't know how to root this rom. I tried installing magisk manager and flashing the zip but I get error 1 in TWRP.
Except this issues it's working very nicely on my device.
Thanks in advance for helping me out
Click to expand...
Click to collapse
10% mark?
Did you entirely remove all the fingerprints before flashing this Tom?
Go back to Elite or Stock, remove all fingerprints and reinstall the Rom
For Root, you can try changing recovery or using an older version of Magisk that worked for you

I am currently reverting back to stock and will try to flash the rom again, I guess I didn't remove the fingerprints before flashing.
I tried Magisk Version 15 and 16 which both worked on EliteRom, I even tried SuperSu which didn't gave me an error message in twrp but It didn't work tho. After flashing the zip there was no "SuperSu" App so I downloaded it from the playstore, the app told me "root not found". Do you know what the cause of this could be?
Edit: Fingerprints are working now But root still doesn't

After I downgrade from emui 8 to emui 5 in 5 minutes now I can fix this rom so expect a build within these days

hoping to try this rom , following for updates

Hey guys I just installed the rom, but I did notice that I don't have access to any Gapps. How to I install them? I'm using TWRP. I was just able to get my unlock code from Honor today, so I unlocked and rooted, and flashed your rom as the first thing, so I'm running a fresh flash of the latest version.

Flash package with Twrp: https://opengapps.org/

Thanks guys, I realized that yesterday right after I posted lol. So far I'm really loving the plain stock-ness of this rom, hopefully it give the device some more life so I won't have to upgrade soon.

MadMurl0c said:
I am currently reverting back to stock and will try to flash the rom again, I guess I didn't remove the fingerprints before flashing.
I tried Magisk Version 15 and 16 which both worked on EliteRom, I even tried SuperSu which didn't gave me an error message in twrp but It didn't work tho. After flashing the zip there was no "SuperSu" App so I downloaded it from the playstore, the app told me "root not found". Do you know what the cause of this could be?
Edit: Fingerprints are working now But root still doesn't
Click to expand...
Click to collapse
Yeah I'm having the same issue to, with no root.

Can someone tell me why this rom is different to all others ? Why is this one using stock vendor and can we easy revert to Emui ? Why don't all others ?
I'm on stock now.

How is the quality of the photos compared to stock rom? It is possible to install Emui camera or other huawei cameras?

** Note **
developments of hi6250 is end reason: switch to another phone, have phone.

** Note **
Developments for hi6250 has been resumed but just for this ROM, sorry for the inconvenience.
I'm already downloading the source for releasing new build but AOSPA will take a wile since have bigger source.

** Note **
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.

Had anyone tried installing Xposed yet?

Support BLL version? Honor 6X

The rom overall is great and smoorh, even F2FS works now
But somehow magisk still doesn't work. It says
Code:
! System installed root detected, mount rw :(
when I try to flash the magisk.zip file.

MadMurl0c said:
The rom overall is great and smoorh, even F2FS works now
But somehow magisk still doesn't work. It says
Code:
! System installed root detected, mount rw :(
when I try to flash the magisk.zip file.
Click to expand...
Click to collapse
Guys to flash magisk or superSU use Meticulus TWRP, other twrp like eliteTwrp show an error when it is recompilling the boot.img

Database Info

welcome