[ROM][UNOFFICIAL] LineageOS 14.1 for Galaxy S4(GT-I9515) - Galaxy S 4 General

// Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
// Info
It's unnoficial LineageOS14.1 for Galaxy S4 Value Edition (GT-I9515).
I strongly recommend to perform a backup of your current rom before installation.
// Install
Recommend: Rooted device with custom recovery like (TWRP 3.X.X)
Installation process from stock rom
Build from xx.xx. and Gapps from xx.xx. to the external SD
Installation Procedure :
coming from stock ....
TWRP - Odin flashable (I use Odin 3.12)
01. I take the battery out now, then battery in again and off into the download mode.
02. flash TWRP with Odin (comes in AP). The hooks at Auto Reboot and F. Reset Time out.
03. disconnect USB cable after flash, battery out and in again.
04. boot into recovery -> Allow Modifications
05 Advanced Wipe: Dalvik/ART Cache, System, Data, Internal Storage, Cache (lasts a while)
06. install -> select lineage image, then add more zips and gapps, then flash
07. patching system image unconditionally runs through with progress bar
08 Open Gapps are flashed, progress bar runs through
09. when done, tap reboot system, Swipe to install TWRP app (or not, if you don't need it)
10th reboot
11. Lot 14.1 boots. (quite a while ^^)
12. type through the facility
13. ready
- make a full Backup from your device
- Full wipe device (system, data, cache, dalvik)
- Install your Build
- Install Gapps (ARM Pico or Nano)
- Wipe Cache and Art/Dalvik
- Reboot
- Wait for 1st boot
- Enjoy
install magisk from here
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
LineageOS Extras
- addonsu-14.1-arm-signed.zip
- addonsu-remove-14.1-arm-signed.zip
*for those who have problems with the automatic update
*automatic update for Galaxy S4 Jfvelte (GT-I9515)
// Partners & Friends for German
https://android-freaks.de/forum/thread/47-rom-unofficial-samsung-galaxy-s4-gt-i9515-lineageos-14-1/
// OTA
https://www.los-legacy.de/14.1/jfvelte
update: monthly
// TWRP 3.1.1.0/Baseband-Bootloader
https://www.androidfilehost.com/?w=files&flid=143398
// TWRP 3.2.3.0/Baseband-Bootloader
[RECOVERY][OFFICIAL] TWRP 3.2.3-0 [jfvelte]
// Thanks / Credits
Code:
* CM team, Omni team
* XDA developers
* Everyone who has contributed to CM on S4
* syphyr and NucWin for their previous work
* Many thanks to invisiblek
//Info Exodusnick is currently taking over Benlue work
Code:
[B][U]!!!since some users have already asked me about new features!!![/U][/B]
Since it is a pure Lineageos version.
and not as optimized as e.g. side build.
All I do is keep your phone up to date.
and if errors occur, they are fixed after each update
[B][U]I hope you understand that I don't make any changes to the version
[/U][/B]
// Donate Us
PayPal.Me
// Source Code
Framework: LineageOS
Kernel: jfvelte-dev
XDA:DevDB Information
[ROM][UNOFFICIAL] LineageOS 14.1 for Galaxy S4 (GT-I9515), ROM for the Samsung Galaxy S4
Contributors
BenLue, Exodusnick
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-09-19
Created 2017-01-08
Last Updated 2020-07-25

Reserved

Reserved

thanks <3

Great work, but no sim detected..

Thank you :good:
Thank you @BenLue for keeping device updated (alive).
God bless you.

is possible Dirty Unicorns 11? is the best rom

gasc said:
is possible Dirty Unicorns 11? is the best rom
Click to expand...
Click to collapse
Please contact Dirty Unicorns 11 Dev´s
Greetings
Ben

All works or there are some bugs?
Thanks!!!

mickdroid94 said:
All works or there are some bugs?
Thanks!!!
Click to expand...
Click to collapse
Yes, it have not sim detected error.

hknsvm said:
Great work, but no sim detected..
Click to expand...
Click to collapse
Uhm sorry for this Issue, i cant reproduced the No Sim Detected Error!
Please make sure:
Rom Clean install
your Sim Card Slot is clean
Greetings
Ben

BenLue said:
Uhm sorry for this Issue, i cant reproduced the No Sim Detected Error!
Please make sure:
Rom Clean install
your Sim Card Slot is clean
Greetings
Ben
Click to expand...
Click to collapse
Thank you
I tried but it have same problem.
No problem when installing another rom

BenLue said:
Uhm sorry for this Issue, i cant reproduced the No Sim Detected Error!
Please make sure:
Rom Clean install
your Sim Card Slot is clean
Greetings
Ben
Click to expand...
Click to collapse
:crying: BUG >
No Sim Detected > baseband unknown

I will give it a try and report if there's a SIM bug or not.
E: Didn't work, now I'm going to try the ROM by sombree

droidfuture said:
:crying: BUG >
No Sim Detected > baseband unknown
Click to expand...
Click to collapse
Its possible to test an different Baseband?
Greetings

unimetal said:
I will give it a try and report if there's a SIM bug or not.
E: Didn't work, now I'm going to try the ROM by sombree
Click to expand...
Click to collapse
I use sombree rom, The rom good work but have some bugs. Sometimes doesn't work camera..

BenLue said:
Its possible to test an different Baseband?
Greetings
Click to expand...
Click to collapse
yes, tested >
ANJ1 4.4.2
BOJ1 5.0.1
BPI1 5.0.1
ANC1 4.4.2
All Wipes.
My model has L without end
GT-i9515L Is that it?

droidfuture said:
yes, tested >
ANJ1 4.4.2
BOJ1 5.0.1
BPI1 5.0.1
ANC1 4.4.2
All Wipes.
My model has L without end
GT-i9515L Is that it?
Click to expand...
Click to collapse
droidfuture, -> GT-I9515L <- is not GT-I9515 (Jfvelte) Value Edition

This thread is in the wrong xda section. It should be in i9515 instead of i9505.

lineage-14.1-20170109-UNOFFICIAL-jfvelte.zip

Related

[Rom] Official Lineage OS 14.1 for Falcon

Lin·e·age
/ˈlinēij/
noun
1.lineal descent from an ancestor; ancestry or pedigree.
2.a sequence of species each of which is considered to have evolved from its predecessor.​
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Download & Install
LINKs:
Rom
Changelog
OpenGapps choose ARM>7.1>micro/nano/pico (micro might still be too big... unless you use the custom install options that allows you not to install everything from the package)
REMEMBER:
ONLY use TWRP 3.0.2-1 or up​HOW TO INSTALL
Requirements: Unlocked Bootloader, a Nougat compatible Custom Recovery and the Downloaded Zips.
1.Place the rom and other like Gapps on the internal Storage or on a USB OTG
2.Reboot to recovery using the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
3.Do Wipes (Data, Cache, Dalvik and System partitions) if you are in a different ROM.
4.Select the Zips
5.Swipe to install (if using TWRP)
6.Reboot and wait 2-3 min​
Flash This to have system root access
READ POST 2 BEFORE FLASHING
XDA:DevDB Information
[Rom] Lineage OS 14.1 for Falcon, ROM for the Moto G
Contributors
Allstargaurav
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
ROM Firmware Required: CyanogenMod13
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2017-01-21
Last Updated 2017-01-26
HOW TO DIRTY UPDATE
1.Download the rom zip
2.Reboot to recovery using the power menu or the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
3.Do Wipes (Cache, Dalvik)
4.Flash the Zip(No Need To flash Gapps)
5.Reboot and wait 2-3 min
HOW TO CLEAN UPDATE :
1.Download the rom zip and make sure you have gapps zip on your device
3.Reboot to recovery using the power menu or the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
5.Format /system, /cache and /dalvik-cache (advance format in wipe menu of TWRP); do NOT Wipe DATA
6.Install zip
7.Reboot and wait 2-3 min
EXPERIMENTAL:-This build will allow you to ‘upgrade’ from CM to the signed LineageOS weekly
How To install EXPERIMENTAL
1.Download experimental and nightly zip
2.Boot into Recovery
3..Install experimental migration build on top of cm-14.1 build
4.Reboot
5.Install LineageOS weekly build
6.Reboot
7.Re-setup your application permissions
You might want to state that this is not the official version. There might be a bit of confusion otherwise because official builds will be available this weekend.
ahmad.o said:
You might want to state that this is not the official version. There might be a bit of confusion otherwise because official builds will be available this weekend.
Click to expand...
Click to collapse
Is it Better Now
It's better to put unofficial tag in title too. Not just as announcement. People might not notice it.
Edit: Just saw your edit.
Please ask a moderator to post it on the android development, doesn't belong here.
Aayushya said:
Please ask a moderator to post it on the android development, doesn't belong here.
Click to expand...
Click to collapse
I will make this Offical Lineage thread as soon as weekly starts rolling
Lineage based on aosp?
Any screenshoots?
Pierre2324 said:
Lineage based on aosp?
Click to expand...
Click to collapse
its more cm based
Great?
Testing. So far so good.
Just installed on xt1032 and looks amazing! Does this get OTA? Or do I have to flash new roms?
What about ram usage Nougat seems bad always low ram on every rom
Pierre2324 said:
What about ram usage Nougat seems bad always low ram on every rom
Click to expand...
Click to collapse
to me is about 240 mb free, anyway nougat runs very well
Wifi sometimes turn down. This is unique bug I found
Working without issues here. :good::good::good:
fix for bluetooth pairing?
Reserved...
Is the op actually a contributor or just putting the thread up?

[Rom] Viper OS for Motorola Moto C (namath)

​
Code:
* Your warranty is voided.
*
* We are not responsible for bricked devices, dead SD cards,
* Third World War, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Code:
If you are having problems and want to send a report (Logcat), make sure that you are reporting from the default kernel, not a modified one. Modified kernels can break or fix, even make things better. It depends. I cannot get a full hint of the problem when you're not running the original kernel.
Features:
Status bar Customization
- Customizable icons
- Quick pulldown
- Smart pulldown
- Notification count
- Clock position
- Seconds in clock
- Date design
Quick Settings
- Brightness slider
- Brightness icon
- Tile tap customization
- Header customization
System
- Power menu customization​
Working:
- Almost everything
Bugs:
- Video recording
ChangeLog
First build:
Code:
* Intial build for Moto C
Second build:
Code:
* Semi fix for video recording
* Used Camu instead of snap camera temporary
Instructions:
1. Download the ROM and move it to your phone storage.
2. Reboot phone to TWRP recovery.
3. Wipe everything execpt SDcard (Internal memory is optional).
4. Flash the ROM and Gapps.
5. Reboot.
DOWNLOADS:
- First Build: Download from here
- Second Build: Download from here
TWRP recovery
- Tutorial for locked bootloader
- Compiled recovery
Source
- Device tree
- Vendor
- kernel source
Base
LineAge OS
Credits
- crDroid Android
- CypherOS
- AICP
- PureNexus
- AOKP
- Dirty Unicorns
- Paranoid Android
- and more..
@iykeDROID™
@Nonta72
@nasreirma
@Zormax
@darklord4822
- Other developers mentioned in my device tree
~ Happy flashing ~​
XDA:DevDB Information
The first Viper OS for Moto C, ROM for the Android General
Contributors
Mysteryagr
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: N/A
Based On: LineAge
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2017-12-06
Created 2017-12-07
Last Updated 2017-12-06
reserved
rom :v
What model? moto c
Enjoy
NexxHud said:
What model? moto c
Click to expand...
Click to collapse
Motorola Moto C 4G - XT1754 - namath
Motoc
would serve for the xt1757 is double sim variant of 4G
NexxHud said:
would serve for the xt1757 is double sim variant of 4G
Click to expand...
Click to collapse
If it is namath, then yea
My roms are for Moto C 4G, codenamed namath
gapps which to use ..?
chetan180 said:
gapps which to use ..?
Click to expand...
Click to collapse
Use the gapps you like, I am using Aroma open gapps
help donor NVRAM not to find it anywhere Moto C 4G 1754
Do not register your IMEI in Maui META
thank you in advance
волков алексей said:
помогите донорским NVRAM нигде не найти его Moto C 4G 1754
не прописать свой IMEI в Maui META
заранее спасибо
Click to expand...
Click to collapse
Kindly reply in English, I can't understand this, if you don't know English, then use Google translate.
Mysteryagr said:
Kindly reply in English, I can't understand this, if you don't know English, then use Google translate.
Click to expand...
Click to collapse
I need a donor NVRAM I can not find it anywhere. or NVRAM calibration for xt1754.
волков алексей said:
I need a donor NVRAM I can not find it anywhere. or NVRAM calibration for xt1754.
Click to expand...
Click to collapse
Just reflash stock firmware and it will be fine.
Note: choose download mode
Mysteryagr said:
Just reflash stock firmware and it will be fine.
Note: choose download mode
Click to expand...
Click to collapse
at Maui META not restore imei need calibration imei 000000000000
---------- Post added at 12:13 AM ---------- Previous post was at 12:07 AM ----------
Mysteryagr said:
​
Code:
* Your warranty is voided.
*
* We are not responsible for bricked devices, dead SD cards,
* Third World War, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Code:
If you are having problems and want to send a report (Logcat), make sure that you are reporting from the default kernel, not a modified one. Modified kernels can break or fix, even make things better. It depends. I cannot get a full hint of the problem when you're not running the original kernel.
Features:
Status bar Customization
- Customizable icons
- Quick pulldown
- Smart pulldown
- Notification count
- Clock position
- Seconds in clock
- Date design
Quick Settings
- Brightness slider
- Brightness icon
- Tile tap customization
- Header customization
System
- Power menu customization​
Working:
- Almost everything
Bugs:
- Video recording
ChangeLog
First build:
Code:
* Intial build for Moto C
Second build:
Code:
* Semi fix for video recording
* Used Camu instead of snap camera temporary
Instructions:
1. Download the ROM and move it to your phone storage.
2. Reboot phone to TWRP recovery.
3. Wipe everything execpt SDcard (Internal memory is optional).
4. Flash the ROM and Gapps.
5. Reboot.
DOWNLOADS:
- First Build: Download from here
- Second Build: Download from here
TWRP recovery
- Tutorial for locked bootloader
- Compiled recovery
Source
- Device tree
- Vendor
- kernel source
Base
LineAge OS
Credits
- crDroid Android
- CypherOS
- AICP
- PureNexus
- AOKP
- Dirty Unicorns
- Paranoid Android
- and more..
@iykeDROID™
@Nonta72
@nasreirma
@Zormax
@darklord4822
- Other developers mentioned in my device tree
~ Happy flashing ~​
XDA:DevDB Information
The first Viper OS for Moto C, ROM for the Android General
Contributors
Mysteryagr
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: N/A
Based On: LineAge
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2017-12-06
Created 2017-12-07
Last Updated 2017-12-06
Click to expand...
Click to collapse
hi, do work it on moto c XT1754 model? must Unlock boot loader (enable OEM Unlock) before Flash this custom rom?
thanks
javad490 said:
hi, do work it on moto c XT1754 model? must Unlock boot loader (enable OEM Unlock) before Flash this custom rom?
thanks
Click to expand...
Click to collapse
No need to unlook bootloader. use this method:
https://forum.xda-developers.com/android/development/recovery-twrp-3-1-1-0-moto-c-t3703184
After install custom recovery, DO a backup of your actual rom, so if something goes wrong, you can always go back to your original firmware.
Tried factory reset from within this rom now phone only boots in twrp mode even after reflashing this rom or resurection remix
Vasko01 said:
Tried factory reset from within this rom now phone only boots in twrp mode even after reflashing this rom or resurection remix
Click to expand...
Click to collapse
What moto c variant do you have?
You can restore your twrp backup. If you didn't make any backup, search for your original firmware and flash system and boot images.
jhonatann989 said:
What moto c variant do you have?
You can restore your twrp backup. If you didn't make any backup, search for your original firmware and flash system and boot images.
Click to expand...
Click to collapse
xt1754
i did make a twrp backup but it doesnt show up at all in restore section for some reason
Vasko01 said:
xt1754
i did make a twrp backup but it doesnt show up at all in restore section for some reason
Click to expand...
Click to collapse
Where did you make your backup? Internal o external storage?

[ROM][7.1.2][12/05/2018] CodeOfHonor's AOSPA Paranoid v7.3.1 for Huawei P8 Lite 2017

Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.
Source Code:
Device Tree:
https://github.com/codeofhonor-dev/android_device_huawei_hi6250
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Huawei P8lite/P8 Lite
Contributors
haky 86, Meticulus
Source Code: https://github.com/hak86/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-02-09
Created 2018-02-09
Last Updated 2018-02-08
ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.
Thank you for your awesome work! AOSPA is my fking favorite ROM.
NetfariousIntent said:
Thank you for your awesome work! AOSPA is my fking favorite ROM.
Click to expand...
Click to collapse
glad to hear that
I'll post in p9 lite and honor 6x sections later
here a screenshot of my friend that run on his p10lite and have almost 19%..
it is stable? can i try it?
---------- Post added at 09:44 AM ---------- Previous post was at 09:05 AM ----------
stuck at installing the rom. it says tested fir you p8 lite 2017 by haky86....... and it doesnt move at all
karasoulas said:
it is stable? can i try it?
---------- Post added at 09:44 AM ---------- Previous post was at 09:05 AM ----------
stuck at installing the rom. it says tested fir you p8 lite 2017 by haky86....... and it doesnt move at all
Click to expand...
Click to collapse
sounds like you didn't use my recovery.
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP
haky 86 said:
sounds like you didn't use my recovery.
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP
Click to expand...
Click to collapse
yup. works. i dont know why man. but the stock rom is faaaaar faster than ur roms. Not trying to be rude i love ur work but i dont know. maybe iim doing something wrong?
** Note **
**11/02/2018**
pa_hi6250-7.3.1-EOL-20180210.zip
Changelogs:
**11/02/2018**
possible fix for ril crashes
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
atsmurat said:
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
Click to expand...
Click to collapse
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
sys01 said:
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
Click to expand...
Click to collapse
Was happening to me until I flashed Gapps aroma with the new dialer and stuff. now everything works smoothly :/
atsmurat said:
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
Click to expand...
Click to collapse
sys01 said:
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
Click to expand...
Click to collapse
some devices require the following flags in build.prop ;
ro.config.client_number=2
rild.libargs1=-m modem1
rild.libpath1=/vendor/lib64/libbalong-ril-1.so
rild.libpath=/vendor/lib64/libbalong-ril.so
rild.libargs=-m modem0
save and reboot, should fix the problem then.
NetfariousIntent said:
Was happening to me until I flashed Gapps aroma with the new dialer and stuff. now everything works smoothly :/
Click to expand...
Click to collapse
I use pico, always.
Sim keep disconnecting itself
It gives error while saving the finger print, both in this and the slim rom
atsmurat said:
It gives error while saving the finger print, both in this and the slim rom
Click to expand...
Click to collapse
Did you erase all of your fingerprints in stock ROM before flashing?
If not, flash elite ROM, erase fingerprints, and then flash this/slim back
CarlosAG10 said:
Did you erase all of your fingerprints in stock ROM before flashing?
If not, flash elite ROM, erase fingerprints, and then flash this/slim back
Click to expand...
Click to collapse
İ didnt erase fingerprints in Omni ROM . From that ?
Where is Elite Rom ?
haky 86 said:
some devices require the following flags in build.prop ;
ro.config.client_number=2
rild.libargs1=-m modem1
rild.libpath1=/vendor/lib64/libbalong-ril-1.so
rild.libpath=/vendor/lib64/libbalong-ril.so
rild.libargs=-m modem0
save and reboot, should fix the problem then.
I use pico, always.
Click to expand...
Click to collapse
Noto solve the SIM from disconnecting itself
Wire1122 said:
Noto solve the SIM from disconnecting itself
Click to expand...
Click to collapse
I will do a test-build post dinner, I fix the problems around here a few weeks ago on some roms!
Have You found the bug? I really want use your rom for Daily use.
** Note **
**13/02/2018**
pa_hi6250-7.3.1-EOL-20180213.zip
**13/02/2018**
Fix RIL crashes.
How to fix RIL Crashes?
Follow this post

[ROM][UnOfficial][surnia]ResurrectionRemix v6.0.0[8.1.0_r11]

Hey ,
Welcome to the goodness of Oreo. This topic will be dedicated to our bring up of Oreo for Moto G 2015
​
Disclamier:
* Include <std_disclaimer.h>
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*​
- Please Do Not Mirror our files without talking to us. We can do that ourselves should we desire to. - ​
What's working?
Camera
RIL
WiFi
Storage
4G
VoLTE
What's not working?
Camcorder (works in footej)
Downloads:
Download [surnia]
Credits:
ResurrectionRemix
AOSP
Open Gapps
LineageOS
TheMuppets​
XDA:DevDB Information
[ROM][UnOfficial][surnia]ResurrectionRemix v6.0.0[8.1.0_r11], ROM for the Moto E 2015
Contributors
althafvly, Alberto97
Source Code: https://github.com/LineageOS/android_device_motorola_surnia
ROM OS Version: 8.x Oreo
Based On: Lineage
Version Information
Status: Beta
Created 2018-02-11
Last Updated 2018-02-10
Reserved
10-02-2018
-Initial build
Everything working good
Great work. Everything works fine
which gapps to use?
Thanks work very well
?
hello the truth are all the same of the same no serve because the main thing of a phone is the camera and video camera and it does not work the only thing they do is add things in configuration in conclusion in order to not download it ?. You can use camera of google version 3.24 gets downloaded in apk mirror that record
Hi, @althafvly
I've just flashed your build, will test and report here.
What version of twrp do you recommend? Little problem with wipe cache's - "unsupported file system - auto".
I edited updater script and deleted "assert...".
Xt1524.
Thanks for your work.
I used latest official TWRP -> https://twrp.me/motorola/motorolamotoelte.html and can't confirm your problem.
I did a wipe of data without any problems, installed ROM, gapps, magisk and Pixel 2 launcher, wiped cache and dalvik cache and reboot without any issue.
I also have XT1524
But I can't give any usefull feedback. I just use this phone for playing music. So only thing I can say bluetooth and wifi are running good.
Com.android.phone (I forgot the correct name) crashes at start up, I couldn't use the rom.
I tried installing the by itself (no gapps) and com.android.phone is still crashing at start-up.
I was able to log the crashes
https://drive.google.com/file/d/1k686PPGbCsL8jD7rJHrxN7m-LrNcIe6a/view?usp=drivesdk
https://drive.google.com/file/d/1DdrhrIBuIbsaAW6yqyqMTcFidGOHpc2w/view?usp=drivesdk
Hello.
With TWRP-3.1.1-0, I can't install on my test-phone.
Red text :
" Updater process ended with ERROR: 7
Error installing zip file '/external_sd/RR-O-v6.0.0-20180210-surnia.zip' "
XT1524, TWRP 3.1.1-0, RR-N-v5.8.5-20170925-surnia-Final.zip (works fine), wipe all nore sdcard. I'll try again...
md5sum OK, for the *.zip
trefix said:
Hello.
With TWRP-3.1.1-0, I can't install on my test-phone.
Red text :
" Updater process ended with ERROR: 7
Error installing zip file '/external_sd/RR-O-v6.0.0-20180210-surnia.zip' "
XT1524, TWRP 3.1.1-0, RR-N-v5.8.5-20170925-surnia-Final.zip (works fine), wipe all nore sdcard. I'll try again...
md5sum OK, for the *.zip
Click to expand...
Click to collapse
You need to extract & edit updater-script from RR.zip.
Delete few checking lines: "assert...".
dzidexx said:
You need to extract & edit updater-script from RR.zip.
Delete few checking lines: "assert...".
Click to expand...
Click to collapse
OK, I'd read about this but didn't understand... I'm a poor frenchie n00b
Well, VIM, Nano ? Deleting lines or a # can works ?...
Thanks a lot.
https://forum.xda-developers.com/showthread.php?t=2522762
All can be done on android phone with total commander f.e.
trefix said:
Hello.
With TWRP-3.1.1-0, I can't install on my test-phone.
Red text :
" Updater process ended with ERROR: 7
Error installing zip file '/external_sd/RR-O-v6.0.0-20180210-surnia.zip' "
XT1524, TWRP 3.1.1-0, RR-N-v5.8.5-20170925-surnia-Final.zip (works fine), wipe all nore sdcard. I'll try again...
md5sum OK, for the *.zip
Click to expand...
Click to collapse
Update twrp
Everything?
crazix said:
Great work. Everything works fine
Click to expand...
Click to collapse
Everything? Video camera, volte calls, picture in picture? Search button in settings
Gapps
crazix said:
Great work. Everything works fine
Click to expand...
Click to collapse
althafvly said:
Hey ,
Welcome to the goodness of Oreo. This topic will be dedicated to our bring up of Oreo for Moto G 2015
Disclamier:
* Include <std_disclaimer.h>
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
- Please Do Not Mirror our files without talking to us. We can do that ourselves should we desire to. -
What's working?
Camera
RIL
WiFi
Storage
4G
VoLTE
What's not working?
Camcorder (works in footej)
Downloads:
Download [surnia]
Credits:
ResurrectionRemix
AOSP
Open Gapps
LineageOS
TheMuppets​
XDA:DevDB Information
[ROM][UnOfficial][surnia]ResurrectionRemix v6.0.0[8.1.0_r11], ROM for the Moto E 2015
Contributors
althafvly, Alberto97
Source Code: https://github.com/LineageOS/android_device_motorola_surnia
ROM OS Version: 8.x Oreo
Based On: Lineage
Version Information
Status: Beta
Created 2018-02-11
Last Updated 2018-02-10
Click to expand...
Click to collapse
Which gapps?
8.1 gapps not available on
openGapps.org
8.0 gapps will work?
dzidexx said:
https://forum.xda-developers.com/showthread.php?t=2522762
All can be done on android phone with total commander f.e.
Click to expand...
Click to collapse
Hello. Thanks a lot for this link : I did (with vim), now it works fine in my second Moto E (XT1524).
So : RR-6.0 for tests, RR-5.8.5 for daily use, no gapps, no cloud... :good:

[ ROM] [V2.2][Stable]MIUI for Gionee P5 Mini By PrashannaGP

#include
/*
Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
MIUI ROM FOR Gionee P5 Mini
WORKING
-Camera
-WIFI/BLUETOOTH/RADIO
-LOUD SOUND [viper4randroid:- Installed]
-...........EveryThing else
BUGS/ changes
-Fixed SMS BUG
-Fixed lags 95%(Disable developer option and go to performance setting and tick on every thing.
-Added New features
-Smooth MIUI
-Other bugs not found.
Working on V2.3 and will get new updates from this app from now onwards!​
DOWNLOADS
ROM Link:-Download
GAPPS - Download From Here
[ SELECT ARM , ANDROID 5.1, NANO or MINI, (I PREFER NOT TO CHOOSE PICO, FULL, MICRO, AROMA)]
State-Rooted, Busybox
{U CAN GET IT ON GOOGLE OR XDA}
SCREENSHOTS
BELOW:good:
XDAevDB Information
MIUI ROM LP V2.1/2, ROM for all devices (see above for details)
Contributors
Mysteger for kernel Source Here
PrashannaGP [OP]
ROM OS Version: 5.1.x Lollipop
Based On: AOSP/CM-12
Version Information
Status: Stable V2.2
Created 2019-03-23
Last Updated 2020-05-06​
Installation direction
1)Root with KingoRoot
2)flash Twrp :-Download From here
3)Boot to Recovery: -Volume up + Power Button
4)Clear Data, cache, Dalvix, System {Except Internal + SD Card}
5)Flash from Install
6)Reboot
7)Done
Click to expand...
Click to collapse
Report Dead Links
XDA:DevDB Information
[ROM-MIUI][Stable V2.2] For Gionee P5 Mini/ Primo GH5 mini, ROM for the Android General
Contributors
PrashannaGP
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: MIUI Themed based on AOSP/CM-12
Based On: AOSP, CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2.2
Stable Release Date: 2020-05-02
Created 2020-04-12
Last Updated 2020-05-03
Can't receive text messages
Text messages are not receiving in this ROM!
umjoshua said:
Text messages are not receiving in this ROM!
Click to expand...
Click to collapse
The System is soo much easy to fix.
Just search message center for your country and add the number to
Code:
*#*#4636#*#*
THEN go to phone information and at the bottom add that number and press update.
That's all to do.
And If not working Again then just check if there is showing INVALID IMEI no. In
Code:
*#06#
AND THAT'S ALL
Sent from my [device_name] using XDA-Developers Legacy app
PrashannaGP said:
The System is soo much easy to fix.
Just search message center for your country and add the number to
Code:
*#*#4636#*#*
THEN go to phone information and at the bottom add that number and press update.
That's all to do.
And If not working Again then just check if there is showing INVALID IMEI no. In
Code:
*#06#
AND THAT'S ALL
I tried everything. But not working.
Click to expand...
Click to collapse
umjoshua said:
I tried everything. But not working.
Click to expand...
Click to collapse
Okay Let say you to do a clean flash. Dirty flashing hadn't worked for you so you have to follow these steps.
1)Reboot to recovery
2)wipe system, data, cache, dalvik cache. not internel nor sd card.
3)flash the rom i had given you above
4)Do not reboot directly.
5)Again wipe data, dalvik cache and cache
6)Then Reboot
7)Wait for 7 to 10minutes
8)Now go to message and then its setting.
9)Insert your smsc number in message center.
10)Reboot Twice.
Thats all
If not working again then I am working on its upgrade version and will fix this soon
But these problems are not present in my device though.
Try above stuffs carefully.
ALso Try
setting/Mobile Networks/APN
And manually add your apn according to sim providers official websites.
Changes LOGS
V2.2​1)Fixed SMS problem
2)Clean MIUI
3)Faster Than V2.1
4)More Functions
V2.1==Little Buggy​
PrashannaGP said:
Okay Let say you to do a clean flash. Dirty flashing hadn't worked for you so you have to follow these steps.
1)Reboot to recovery
2)wipe system, data, cache, dalvik cache. not internel nor sd card.
3)flash the rom i had given you above
4)Do not reboot directly.
5)Again wipe data, dalvik cache and cache
6)Then Reboot
7)Wait for 7 to 10minutes
8)Now go to message and then its setting.
9)Insert your smsc number in message center.
10)Reboot Twice.
Thats all
If not working again then I am working on its upgrade version and will fix this soon
But these problems are not present in my device though.
Try above stuffs carefully.
ALso Try
setting/Mobile Networks/APN
And manually add your apn according to sim providers official websites.
Click to expand...
Click to collapse
Sir I tried it.. But still the same...
Can you solve it in the next version?
umjoshua said:
Sir I tried it.. But still the same...
Can you solve it in the next version?
Click to expand...
Click to collapse
fixed update from above link
@PrashannaGP
Urgent. Please see your PM inbox

Categories

Resources