Database Info

Hcl me y2 root & custom rom

I just bought hcl me y2 tablet phone ....it cool but has issues with software .I have a gtab 10.1 fully rooted with custom rom , I want the same for my me y2 is it possible and has anyone really done it .please help. I contacted someone on craigslist who said he could root ,but I wound up getting stiffed for 30$. So if anyone can help me please .

I can't post detailed instructions due to low post count.
Easy root without UnlockRoot (Tested by me)
Enable Google Play
CWM & Cyanogenmod (We need to request for supporting HCL ME Y2)

does cwm work??

CWM is here
Just put it in the root of ur internal sd and when u boot to recovery u willl get CWM instead of stock

hcl me y2 rooting
Dear Titokhan,
Are you sure that you rooted Y2 using unlockroot?
Is SU working properly?
Is not bootloader of Y2 locked?
I tried unlockroot once but shows problem in the middle of the process.
Could you help?

Y-DROID custom rom for Y2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Working on Y2 custom rom...
Going to publish ASAP..........

Good work Bro!
Awesome stuff bro!
Keep it coming ... A few things though:
1. the simcard seems to be locked down ... even after resetting ...
2. Every once in a while with the sd card inside the device reboots itself ... the dreaded cold reset!
But otherwise its working like a dream. Freedom from HCL finally!

Awesome UI ...
But reboot automatically every 5-10 minutes ...
SIM is not working ...
Please help ...

Help building custom recovery for mt6580

Hi,
I have an mt6580m device (Dialog Optima 2 / A130) and after trying almost every method in the internet I still couldn't get it rooted. The only possible solution seems to be compiling a recovery which I cannot afford to due to extremely expensive + slow internet. So if anyone could compile/port me a custom recovery (cwm/twrp/philz/carliv whichever supports install from zip) it'd be so nice of you. Please help.
bootloader is unlocked.
fastboot shows a max download size of 134217728 though the system.img is much bigger than that (around 1GiB) , so it seems to be impossible (afaik) to flash a modified system.img.
stock rom link: needrom .com/download/dialog-optima-a130
CPUZ screenshots + device about screenshots attached.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help is really appreciated.

someone please reply ?

devzdesilva said:
Hi,
I have an mt6580m device (Dialog Optima 2 / A130) and after trying almost every method in the internet I still couldn't get it rooted.
Click to expand...
Click to collapse
Hi i have an M8 (same as Jiake M8) with a MT6580 and Android 5.1.
I can confirm that i rooted my phone today with Kingoroot.
Still searching for a way to get a custom recovery on it.

Gammapooka said:
Hi i have an M8 (same as Jiake M8) with a MT6580 and Android 5.1.
I can confirm that i rooted my phone today with Kingoroot.
Still searching for a way to get a custom recovery on it.
Click to expand...
Click to collapse
Hi, Unfortunately no root app worked for me. Since literally no one else had the phone I had to port a twrp recovery.

devzdesilva said:
Hi, Unfortunately no root app worked for me. Since literally no one else had the phone I had to port a twrp recovery.
Click to expand...
Click to collapse
KingRoot is working both pc version & phone version, try latest kingroot version & see if it working for you.

devzdesilva said:
someone please reply
Click to expand...
Click to collapse
Did you find solution how to root MT6580 ?
Thanks.

[ROM] [7.1] STABLE AOSP 7.1 for DOOGEE Y6

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Presenting you a real AOSP 7.1 (SDK 25) for the DOOGEE Y6 smartphone. This ROM is very tiny. Making it easy to handle. That also makes it fast and battery friendly, compared to heavy ROMs.​
Features
Android 7.1 (SDK 25)
Recent security patch (September 5)
Very small size
Good battery life
Fast
Stable
Stock Android
No bloatware
No lag
MiraVision support
Integrated fonts manager
Click to expand...
Click to collapse
Bugs
Potential weak signal on 4G/LTE networks.
If you find one, please fix it yourself.
Downloads
ROM: Light-AOSP-7.1.2_Y6_by_Nonta72.zip (Mega – 638.6 MB)
Nokia-Camera.zip
Google-Camera.zip
FIX_Wi-Fi_hotspot.zip
Installation
Make sure you are running an Android 7.x ROM (LineageOS 14.1 is not included). If not, download and install official 7.0 for DOOGEE Y6
Install TWRP for DOOGEE Y6
Boot from TWRP
Backup NVRAM and NVDATA just in case
Wipe data, cache, dalvik/art cache and system.
Install the ROM
Install either Nokia-Camera.zip or Google-Camera.zip. The integrated camera causes problems.
Reboot (First boot shouldn't exceed 10 minutes)
Done.
Click to expand...
Click to collapse
Notes
If you use the ROM for a certain time and wipe the data in TWRP, you will need to flash the whole ROM or you'll be stuck in bootloop.
You should use Buttons Remapper app to remap your left button so that it can launch Recent apps just like in Stock
In case of IMEI error or no signal, boot to TWRP and restore NVRAM and NVDATA backup.
Click to expand...
Click to collapse
Screenshots
Credits and thanks
Syed Ahmed Ali Shah
John Gothi
Sandeed Sethi
Irma Nasre
Riordan87 @ 4PDA
Anyone else who helped as well.
If you like my work, you can make a donation to me.

How to install?
I have a Doogee Y6 running Android 6.0 that came with the phone. Can you please write step-by-step instructions on how to root, then flash this ROM... this is for a newbie.
Thanks. Regards.

Hello, can i use it with Y6C model? Thank you

[RECOVERY] [PORT] [SM-J106B] TWRP 3.2.1-0 for Galaxy J1 Mini Prime

TWRP 3.2.1-0
for Galaxy J1 Mini Prime​
This recovery was ported for the SM-J106B variant, however it may work on other variants like the SM-J106F/H/DS. If it works on any of those variants please reply so I can put it here.
Bugs:
- MTP isn't working.
Everything else seems to work perfect!
This recovery IS SEAndroid Enforcing so no warning should appear when booting up.
Download link:
https://www.androidfilehost.com/?fid=6006931924117883519
(Flash through Odin).
Screenshot (a photo is attached to the post):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special thanks:
- The TWRP team (for making the best recovery for Android phones).
- Hovatek (for the base recovery I used to port).
- Sudroidtech (for having great guides on porting ROMs and recoveries).

Should I try this one ? I see no answers... I would like to be sure it won't brick my phone. J106F

thanks, can i root my phone with TWRP Recovery?

MasterAlreadyTaken said:
thanks, can i root my phone with TWRP Recovery?
Click to expand...
Click to collapse
Yes you can.

SM-J106F here. Not working ):
Found a working one @ 4PDA
https://4pda.to/forum/index.php?showtopic=886898&st=300#entry82254431
Attached is a TAR version ready to flash via ODIN.

TheGame455 said:
TWRP 3.2.1-0
for Galaxy J1 Mini Prime​
This recovery was ported for the SM-J106B variant, however it may work on other variants like the SM-J106F/H/DS. If it works on any of those variants please reply so I can put it here.
Bugs:
- MTP isn't working.
Everything else seems to work perfect!
This recovery IS SEAndroid Enforcing so no warning should appear when booting up.
Download link:
https://www.androidfilehost.com/?fid=6006931924117883519
(Flash through Odin).
Screenshot (a photo is attached to the post):
Special thanks:
- The TWRP team (for making the best recovery for Android phones).
- Hovatek (for the base recovery I used to port).
- Sudroidtech (for having great guides on porting ROMs and recoveries).
Click to expand...
Click to collapse
Bug when restore backup , i got hang logo ..do you have older version 3.1.1 is stable

agoesirman said:
Bug when restore backup , i got hang logo ..do you have older version 3.1.1 is stable
Click to expand...
Click to collapse
Sorry, no. I don't have this device anymore

TheGame455 said:
Sorry, no. I don't have this device anymore
Click to expand...
Click to collapse
that's sad but: Did port this to j1pop3g Galaxy Ace J110H and everything's working! Even MTP, and backup!

Question Twrp App not working properly

I want to flash a custom rom (android 12 gsi) in my phone, twrp must be installed for that but there is no twrp available on official twrp site, there is an unofficial twrp recovery is present on xda, but i don't have dare to use that file as any wrong step can possibly brick my phone once again.
So I have decided to patch the stock recovery img from my frimware using twrp app (on playstore) and then flashing that file would be more appropriate, but when i open twrp app it shows only one option
View attachment 5335205
And not the other option i,e. "select and file to patch "
Just as it is shown on ps
View attachment 5335207
And ya one more thing to be noted that network statics option can't connect to internet (wifi as well as cellular)
View attachment 5335209
How to fix this if anyone knows plz reply
Device :Samsung Galaxy M11
Model : SM-M115F/DS

Picture 1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pictures 2
3

Is bootloader unlocked???
Also u can flash twrp using magisk and adb

Kernel and TWRP for a127f u2 (Exynos 850)
I have built a custom kernel for the a127f Exynos 850 I've also included a link to more custom recoveries in post#2 physwizz a12s kernel version 4 Based on a127f NOT for baseband u3 or higher For OneUI 3.1 ( also works for GSIs) Samsung...
forum.xda-developers.com

so this is the wrong forum but try flashing this: TWRP 3.4.x.x for Samsung Galaxy M115F

Abhaydiwan said:
Picture 1
View attachment 5335225
Pictures 2
View attachment 5335229
3
Click to expand...
Click to collapse
You don't select device.
Select file to flash and flash a recovery.img that you have downloaded