[ROM][10.0][OFFICIAL] FlokoROM v3.0 [evert][Moto G6 Plus] - Moto G6 Plus ROMs, Kernels, Recoveries, & Other De

[ROM][10.0][OFFICIAL] FlokoROM v3.0 [evert][Moto G6 Plus] - Moto G6 Plus ROMs, Kernels, Recoveries, & Other De

additional information
Changelog
You can read full changelog (Git changes) in FlokoROM. Open Settings -> Floko Settings -> about FlokoROM -> current changelog .
Code:
[SIZE="3"]
Floko-v3.0-evert-20200530_130712-OFFICIAL - kernel update
* Update kernel 4.4.225
* Track to FlokoROM update
Floko-v3.0-evert-20200511_130635-OFFICIAL - May,2020 security patch update
* Update kernel 4.4.223
* May,2020 security patch levels
* Track to FlokoROM update
Floko-v3.0-evert-20200507_190316-OFFICIAL - kernel update
* Update kernel 4.4.222
* Building kernel with clang 11.0.1
* Track to FlokoROM update
Floko-v3.0-evert-20200502_195704-OFFICIAL - kernel update
* update Kernel 4.4.221
* Track to FlokoROM update
Floko-v3.0-evert-20200425_120547-OFFICIAL - kernel update
* update Kernel 4.4.220
* Track to FlokoROM update
Floko-v3.0-evert-20200415_093857-OFFICIAL - 2020-04-05 security patch update
* update Kernel 4.4.219
* 2020-04-05 security patch levels
* Track to FlokoROM update
Floko-v3.0-evert-20200404_102658-OFFICIAL - kernel update
* update Kernel 4.4.218
* Force enable mobile network settings v2
* Update qti-telephony-common
* Track to FlokoROM update
Floko-v3.0-evert-20200330_135617-OFFICIAL - hotspot and kernel building clang target fix
* WiFi tethering (hotspot) fix (Problems with CAF. It's not a FlokoROM/device problem.)
* Building kernel with clang 10.0.5 build 6305083
Floko-v3.0-evert-20200326_230440-OFFICIAL - Official release!
* Migration to official build
* Track to FlokoROM update
Floko-v3.0-evert-20200323_224926-UNOFFICIAL - Kernel update
* Track to linux kernel 4.4.217
* Fix up build of qcacld-3.0
* Track to FlokoROM update
Floko-v3.0-evert-20200318_143821-UNOFFICIAL - First release.
* Enforcing SELinux.
* Building kernel with clang 10.0.5
[/SIZE]

Reserved

The official build guidelines for FlokoROM have been released.
reference : https://github.com/FlokoROM/manifesto/wiki/How-to-official
and I was given permission to make it officiality build by him.
Therefore, i will update the ROM at least once a month.
The "MAX RESPECT" to @1indwurm

Hey! Thank you for the efforts you have put into the rom. I need a quick help, rather a solution. My VOLTE (carrier JIO India) after flashing any ROM won't work. I can use the data, but can't seem to make a call. HELP!

Great rom! Love the tweaking possibilities, seems stable and ready to use as a daily driver, no problems yet. :good:

sani23 said:
Hey! Thank you for the efforts you have put into the rom. I need a quick help, rather a solution. My VOLTE (carrier JIO India) after flashing any ROM won't work. I can use the data, but can't seem to make a call. HELP!
Click to expand...
Click to collapse
Does the IMEI recognize?
If the IMEI is 0, try the URL thread.
https://forum.xda-developers.com/g6-plus/how-to/guide-how-to-solve-wifi-mobile-data-t3994827
If Baseband is working properly, the end of baseband should end with an "R".
example: M660_29.59.01.96R
I don't have a VoLTE line, so sorry I can't debug it.

Microphone is working?

Jonathas S said:
Microphone is working?
Click to expand...
Click to collapse
It works. but calls with a bluetooth headset do not work.

hi, where can i find the copy-partitions-ab.zip file and which gapps do you recomend?

Clopy said:
hi, where can i find the copy-partitions-ab.zip file and which gapps do you recomend?
Click to expand...
Click to collapse
copy-partitions-ab.zip is here.
https://forum.xda-developers.com/showpost.php?p=78532436&postcount=2
I recommend gapps is opengapps.

tumayouzi said:
Does the IMEI recognize?
If the IMEI is 0, try the URL thread.
https://forum.xda-developers.com/g6-plus/how-to/guide-how-to-solve-wifi-mobile-data-t3994827
If Baseband is working properly, the end of baseband should end with an "R".
example: M660_29.59.01.96R
I don't have a VoLTE line, so sorry I can't debug it.
Click to expand...
Click to collapse
A noob question! Since you don't have VoLTE line it may never be incuded in the ROM. Correct? That being the case, is it possible for you to take the module from other moto devices or say if i could send you my phone's image, could you add the module to rom?

sani23 said:
A noob question! Since you don't have VoLTE line it may never be incuded in the ROM. Correct? That being the case, is it possible for you to take the module from other moto devices or say if i could send you my phone's image, could you add the module to rom?
Click to expand...
Click to collapse
Since I have no way to verify it, I'll add it if you tell me in step by step how to apply the code and modules that worked correctly.

tumayouzi said:
Since I have no way to verify it, I'll add it if you tell me in step by step how to apply the code and modules that worked correctly.
Click to expand...
Click to collapse
Okay. I don't know the codes for VOLTE though. But i can test and verify it for you, throughout the module

Yes plese. I need help with the same. No other ROM is supporting VOLTE for ReTIN edition of g6 plus. If possible, can you take stock retin firmware as the base and take the needful codes for VoLTE? If that can be done, it could really be helpful. Thank you.
Edit: i found this android page that has some relevant info, I'm not really a coder, so can't help besides this and testing the rom during development.
source.android.com/devices/tech/config/carrier

arigatou gozaimasu
hello OP. thank you very much for your work, i really apreciate!
i'm planning to flash your build Floko-v3.0-evert-20200609_132637-OFFICIAL
i'm new with this device and have noob questios, hope you can help me:
0.- i'm on stock rom 9.0 ppws29.116-11-23 may's security patch
1.- i see your build have the 4.x kernel, can i use the official twrp 3.3.1.0. or there's another custom recovery compatible with that kernel?
2.- the copy-partitionsAB file.. do i have to flash it everytime i flash or update this rom? i always perform clean-flash (wiping everything + format data)
3.- you write that i need to adb sideload the rom.. but can i copy to my sd card? along with opengapps and magisk... or it's really necessary to "sideload" it?
4.- the only reason i root my devices is for adaway and magiskhide for my banking apps... do magisk is fully working with your rom? i saw in your first post that ctsrofile fail... or this can be solve by flashing the 'safetynet pass' module
5.-my previously device was the redmi note 4... the bugs with the mic recording in some apps was solve by disabling the "ok google" voice recognicion. do your rom has the same issue?
thank you in advance for your comments and i hope you the best.
-dgm

Related

[ROM][9.0][PIE][OFFICIAL] ZirconiumAosp [IGNITE][land][r34][04/17/2019][NON-TREBLE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
We are focusing on Stability. We are bringing more Stable ROM for your devices and it got everything that will make you stick to it.
We look forword for precious support of all Users.
@Professional_Guider(Founder/Lead Developer)
@LordShenron(CoFounder)
@sunnyraj84348(Developer)
@Abhijeet_Vadera(Graphics Designer)
Support Us if you like our work
[SIZE=+3]Got an issue or suggestion? Reach us at[/SIZE]
Telegram: https://telegram.me/ZirconiumAospChat
Networks And Internet
- Roaming Indicator
- 4G Icon
- VoLTE icon
- Show Data Disabled Icon
Display settings customization
- Font size customization according to percentage
- Lockscreen Charging Info (Toggable)
- 21+ Accents Added
- Omni Themes
- Dark Theme Added
- Black Theme Added
- Ambient Display
Sound settings customization
- Short Cut to prevet Ring added.
- Charging Vibration (Toggable).
- Now Playing Feautre.
Security settings customization
- fingerprint Authentication Viberation (Toggable)
- Lockscreen Powermenue Visibility
- Weather Temp
ZirconiumAosp: ZirconiumAosp
ZirconiumAosp Device Sources: ZirconiumAosp Devices
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 27.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
The ROM should contain everything you need to enjoy Android. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
- Backup your personal data (Important)
- Download the ROM and GApps and transfer them to your device.
- Boot to recovery (TWRP recommended).
- Wipe the System, Cache, Data and ART/Dalvik cache.
- Flash the ROM + Gapps Zipfile.
- Flash the root solution of your choice (optional).
- Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every update (= ROM Update)
Currently Supported Root Solutions:
Magisk stable
Magisk versions higher than 17.0 doesn't require flash on every dirty flash depending on the device, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine
ROM:
Sourceforge
GApps:
Unofficial OpenGApps
OpenGApps
- Pixel Experience
- Google for AOSP
- Dirty Unicorns
- LineageOS
- SuperiorOS
- Omni
- ArrowOS
- MSM-XTENDED
- AICP & POSP Team for thread template idea
- Please let us know if we forgot to mention your name in credits..
XDA:DevDB Information
Contributors:
Nichcream for device tree & thanks to all the tester
Kernel source:
https://github.com/nichcream/android_kernel_xiaomi_msm8937
ROM OS Version: 9.x.x Pie
ROM Kernel: Linux 3.18.123
Based On: AOSP
Version Information
Status: Beta
Current Version: IGNITE
Release Date: 04-17-2019

Wew back to back ROM sir. U r on fire:good:

power menu and buttons not showing iths bug

VOLTE doesn't work when phone is connected to WiFi

shivanshusuraj said:
power menu and buttons not showing iths bug
Click to expand...
Click to collapse
Cozz the rom is still labeled as beta

Bhavesh_L said:
VOLTE doesn't work when phone is connected to WiFi
Click to expand...
Click to collapse
Can you explain it ?

K7jhin said:
Can you explain it ?
Click to expand...
Click to collapse
i flashed this rom twice because i thought i made mistake while flashing it. But i followed all the steps while flashing it second time. after reboot i didn't connect my phone to WiFi, skipped the setup steps. VoLTE was working fine till 3-4 minutes because i didn't connect phone to WiFi. But as i connected it to WiFi, VoLTE symbol in status bar disappeared and calls, messages nothing was working. Then i again disconnected WiFi and after few seconds VoLTE symbol reappeared and call, messages started working.

Changelog (04-17-2019) :
=> Switch to Non treble (nichcream)
=> Fix some denial
=> Tune brightness
=> April Security Patch
*Report any bug if you find it ??

[CLOSED][ROM][OFFICIAL][10.0][Crystal] Havoc-OS 3.8 [2020/08/18]

Download Rom
Download Twrp
Android OS version: 10.0.0_r41
Security patch level: August 2020
Build author: Raghu varma
My build script: https://github.com/RaghuVarma331/scripts
Kernel Source code: https://github.com/RaghuVarma331/android_kernel_nokia_sdm660
Source code: https://github.com/Havoc-OS
ROM Developer: Anushek Prasal

* reserved

Changelog
* shipped with Google apps
* No need to Flash Gapps from Now

Thanks for the ROM. I'd flashed Android 10 stock and then this rom following the steps but I don't know if there is another version or what but this rom detects 2 sim slots (slot 1 has my own IMEI number, slot 2 has a IMEI number that I've never seen before (not even in the box)).
Sadly mobile net is not working. "No SIM card inserted". I've tried to flash the modem from the A10 stock with no luck whatsoever.

Changelog - 26-01-2020
Note - clean flash recommended
* January security patch
* Disabled force encryption
* Compiled using legacy
* Linux version 4.4.194 ( Black caps edition ) based on Official stock kernel sources 4.10C & compiled using clang 9.0.3
* Fixed mic bug during calls via headphones
* Comes with 410C vendor.img
* Added OTA Support

Changelog Tue Aug 18 14:07:58 UTC 2020
===============================
* initial OFFICIAL build with gapps & without gapps
* Build based on latest stable sources
* Improved system stability
* User interface enhancements
* Google Security Patch 2020-08
* Faceunlock support out of the box
* Comes with BlackCaps kernel
* Linux version 4.4.212
* System blobs based on 4.15C
* Vendor blobs based on 4.15C
* Camera blobs based on 4.150
* Updated fingerprint to August from coral
* Redumped configurations from 4.15C/D dumps
* Fixed low volume issues on 6+ (no issues for 7+ , 7.1 & 6.1)
* Fixed usb tethering
* Fixed network switch
* Brought back plenty of network options like before (this really helps different zones/countries to select accordingly to their sim especially Newzealand, Australia , United Kingdom & California)
* Updated power profile from stock 4.15C (DRG/CTL/PL2) 4.15D (B2N)
* Updated usb configuration props from stock
* Updated CarrierConfig from motorola Payton (latest stock rom)
* Safety net passed out of the box
* All banking apps will work

Been using it for almost 3 weeks now. No issues whatsoever. For some reason i think charging is a bit slower. Otherwise very solid and stable.

NFC doesn't work
Raghu varma said:
Havoc-OS for Nokia 7.1 [Crystal]
What is this?
Havoc-OS 3.x is based on AOSP, inspired by Google Pixel.
Has a refined Material Design 2 UI by @SKULSHADY.
So many features that you probably won't find in any ROM.
All you can dream of and all you'll ever need.
Just flash and enjoy...
Based on Android 10.0
Whats working?
Ril
Wifi
Mobile data
Double tap to wake
Double tap to sleep
Adaptive brightness
Dark theme
Ambient display
Flash light
Sound / vibration
Camera
Volte
Fingerprint
Known issues
All fixed for now . comment below if you face any bugs
Installation procedure
Note - Gapps already included & I don't recommend you people to flash any other custom kernels on this ROM untill Nokia release Q kernel sources. Because this ROM supports only stock kernel .
1. Boot in to twrp
2. Format data by typing yes
3. Reboot to bootloader
4. Now again boot in to twrp
5. Wipe everything
6. Now copy rom zip & twrp installer zip to phone
7. Flash the rom zip & twrp installer zip
8. Change to alternative slot
Example if you are on Slot a Change to slot b if you are on b change to a
9. Now reboot to recovery
10. Wipe all except system & vendor
11. Reboot system
Credits
* HavocOS & CO (For Source Code)
* All the authors in my git sources
* Nokia For Prebuilt Vendor , Pie Kernel Source & Q beta prebuilt kernel
* Moderators (For Giving Freedom To Post Threads)
* My entire Nokia 6.1 Plus community Thank you all for your massive support Again

Click to expand...
Click to collapse
All is OK, but nfc doesn't work.....

Camera not wotking on rom without Gapps
I try this Havoc-OS-v3.8-20200828-Crystal-Official.zip rom, without Gapps and notice that Camera isn't working...

brumela said:
I try this Havoc-OS-v3.8-20200828-Crystal-Official.zip rom, without Gapps and notice that Camera isn't working...
Click to expand...
Click to collapse
Use gcam bro. Check my link in the apps section.

Souroking said:
Use gcam bro. Check my link in the apps section.
Click to expand...
Click to collapse
I try it, but it crashes when started. I did wipe storage and cache of camera app.

brumela said:
I try it, but it crashes when started. I did wipe storage and cache of camera app.
Click to expand...
Click to collapse
Okay there might be an issue with the camera driver. Try reinstalling the rom. I am using this rom since august. This is the august 18 build i m using. Everything is fine.

Souroking said:
Okay there might be an issue with the camera driver. Try reinstalling the rom. I am using this rom since august. This is the august 18 build i m using. Everything is fine.
Click to expand...
Click to collapse
I tried Havoc-OS-v3.8-20200828-Crystal-Official-GApps.zip and Havoc-OS-v3.8-20200828-Crystal-Official.zip from https://sourceforge.net/projects/havoc-os/files/Crystal/, tested on fresh flashed installations. On both default rom camera didn't start, nor did camera from your suggested link.
will check Havoc-OS-v3.8-20200818-Crystal-Official.zip

SOLVED - Camera not wotking on rom without Gapps
brumela said:
I tried Havoc-OS-v3.8-20200828-Crystal-Official-GApps.zip and Havoc-OS-v3.8-20200828-Crystal-Official.zip from https://sourceforge.net/projects/havoc-os/files/Crystal/, tested on fresh flashed installations. On both default rom camera didn't start, nor did camera from your suggested link.
will check Havoc-OS-v3.8-20200818-Crystal-Official.zip
Click to expand...
Click to collapse
Ok, I managed to make it work on Havoc-OS-v3.8-20200828-Crystal-Official.zip, after I installed Microg (thought Magisk) camera started to work.
Also NGCam_7.4.104-v1.8-fix works with microg installed.

I flashed the latest build , but ambient screen is not working , it works only when double tap , i want it always ON , Please give me a fix , otherwise rom is best of all !!

I had Havoc OS installed on my Nokia 7.1, and I was messing around with my PIN, and clicked "scramble pin' or similar setting, and locked my phone. It unlocked as usual, and I was happy with it until I restarted the device. It didn't accept any variation of my PIN, even though it was 13726842021. I booted into TWRP, and used the PIN to decrypt the file system just fine, using the pin above.
Any advice?

Thread closed on request of OP @Raghu varma

[ROM]LineageOS 18.1 for Realme 3i[UNOFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community-built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working :
Audio
Bluetooth
Camera
EGL
GPS
RIL (Calls, SMS, Data)
VoLTE
VoWiFi
Sensors
Video Playback
Wi-Fi
Known issues :
Double Tap to Wake
Encryption
Fingerprint not working for et512 models. Users having other sensor can use it just fine
Not really an issue but, the device codename will only be displayed as RMX1821 even for RMX1823 and RMX1827, it is only for displaying purpose and is completely safe for flashing on RMX1823 and RMX1827. All Realme 3 and Realme 3i devices share the same firmware
Selinux is permissive(Temporary. Will soon make it enforcing)
You tell me the rest
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed any root implementation
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless). Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Instructions
Have custom recovery installed (Use this if not installed already)
Download the latest LineageOS Build and GApps(Optional)
Wipe cache, Dalvik cache, data (If you have done format instead of a wipe(required for decrypted data partition for the first time), reboot the recovery once or else it will end up with issues/errors)
Flash the ROM and GApps(Optional)
If the ROM doesn't boot and goes to recovery even after flashing the recommended GApps, then go to fastboot from recovery and type the commands "fastboot erase para" and "fastboot reboot"
Enjoy the rom
Downloads
lineage-18.1-20210306-UNOFFICIAL-RMX1821.zip
FlameGApps (As of now Android 11 version is still under BETA, but is working fine. Testers only used FlameGApps. Hence, they are recommended)
Source Code
ROM: https://github.com/LineageOS
Device Tree: https://github.com/Maanush2004/android_device_realme_RMX1821
Vendor Blobs: https://github.com/Maanush2004/android_vendor_realme_RMX1821
Kernel Source: https://github.com/Maanush2004/android_kernel_realme_RMX1821
lineage-18.1/lineage-18.1-rmui branch was used to compile
Last but not the least:
Thanks a lot to testers and other authors of commits in my tree
I don't own this device, but was asked to make roms for it. Hence testers and the people who can find testers were crucial and am listing their telegram usernames
Dheo96
Riazali172
Md Samim
DhruvMaggu
SoniDharma
haditriw
Mad_Dog_Jr
EYAD_ART
vishalk17
dojtovv
Sachindewan
Rohan
Android64x
AnuragRoy
kingzod
Sadhna
Adlinzein
GilangRamadhan71
Animesh20
Naissa154
Ectocrup
inosent_aman
Sachinrajput0
SK
Denis061
Aaranx
PSYCHO742133
Denis061
ct_world
toakkao
aviationalpha
XDA:DevDB Information
LineageOS, ROM for the Realme 3i
Contributors
M.A.P
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: RealmeUI C.17
Version Information
Status: Beta
Created 2020-11-14
Last Updated 2021-03-08

lineage-17.1-20201110-UNOFFICIAL-RMX1821
Known issues :
Double Tap to Wake
Encryption
VoLTE call might get stuck at hanging up (This is very rare. It only happened twice in this week for a tester while the others didn't face any such issue. If you face such issue just restart the device)
WiFi Calling
Magisk or any other root implementation for that matter (Probably due to oppo_root_check in stock kernel and also due to vbmeta being appended to bootimage which is getting skipped during repacking of bootimage)
Fingerprint not working for et512 models. Users having other sensor can use it just fine
Not really an issue but, the device codename will only be displayed as RMX1821 even for RMX1825, it is only for displaying purpose and is completely safe for flashing on RMX1825
Safetynet doesn't pass
Call Recording
Selinux is permissive(Temporary. Will soon make it enforcing)
Download from here : https://www.androidfilehost.com/?fid=10763459528675580741
Source Code
ROM: https://github.com/LineageOS
Device Tree: https://github.com/Maanush2004/android_device_realme_RMX1821/tree/lineage-17.1-rmui
Vendor Blobs: https://github.com/Maanush2004/android_vendor_realme_RMX1821/tree/lineage-17.1-rmui
Prebuilt kernel taken from:https://download.c.realme.com/osupdate/RMX1821EX_11_OTA_1160_all_nvdqHN4w55Z1.ozip
lineage-18.1-20201230-UNOFFICIAL-RMX1821
Changelog:
Initial Android 11 LineageOS 18.1 build
Safetynet passes
Call recording
Known issues:
Double Tap to Wake
Encryption
VoLTE call might get stuck at hanging up (This is very rare. It only happened twice in this week for a tester while the others didn't face any such issue. If you face such issue just restart the device)
WiFi Calling
Magisk or any other root implementation for that matter (Probably due to oppo_root_check in stock kernel and also due to vbmeta being appended to bootimage which is getting skipped during repacking of bootimage)
Fingerprint not working for et512 models. Users having other sensor can use it just fine
Not really an issue but, the device codename will only be displayed as RMX1821 even for RMX1825, it is only for displaying purpose and is completely safe for flashing on RMX1825
Selinux is permissive(Temporary. Will soon make it enforcing)
Download from here : https://www.androidfilehost.com/?fid=17248734326145705367
lineage-18.1-20210306-UNOFFICIAL-RMX1821.zip
Changelog :
Added FaceUnlock on users request
Fixed VoWiFi
Added MTK Engineer Mode
Switched to source built kernel from prebuilt kernel (Testers reported that battery life was improved)
Added Flipendo Extreme Battery Saver on users request
Fixed VoLTE/VoWiFi for Airtel, VI and BSNL users
ROM updated to March 2021 security patch
Known issues :
Double Tap to Wake
Encryption
Fingerprint not working for et512 models. Users having other sensor can use it just fine
Not really an issue but, the device codename will only be displayed as RMX1821 even for RMX1823 and RMX1827, it is only for displaying purpose and is completely safe for flashing on RMX1823 and RMX1827
Selinux is permissive(Temporary. Will soon make it enforcing)
Download from here : https://androidfilehost.com/?fid=2188818919693749338

Reserved

Here for any Help regarding the ROM......
Ask for any info you may need...

My phone not boot
After flash ROM My phone boot to recovery mood directly.
And not run fastboot.
I don't use my phone.
Pls help me. Reply pls

Animesh20 said:
After flash ROM My phone boot to recovery mood directly.
And not run fastboot.
I don't use my phone.
Pls help me. Reply pls
Click to expand...
Click to collapse
use reboot option in recovery and select bootloader, then the phone will reboot into fastboot. When device is in fastboot, connect phone to a device with fastboot drivers installed, and then type 'fastboot erase para' and after that type 'fastboot reboot'. It will hopefully make the rom boot.
Few testers had such issues when they flashed non-stock stuff, like gsis or rom, most of them got their issue solved by using fastboot erase para, while a single tester needed to revert back to stock realmeui again and then flash rom

M.A.P said:
Thanks a lot to testers and other authors of commits in my tree
Click to expand...
Click to collapse
Thanks for your work.
Hardly 2-3 comments for last several months. Just wanted to ask if the project is active.
I can see the latest update is in March, but just wanted to double-check....
dhruv.maggu.3 said:
Here for any Help regarding the ROM......
Ask for any info you may need...
Click to expand...
Click to collapse
Are you still available for any help
Any video tutorial?
Especially want to ask that for installing latest March update what firmware or what android stock I have to be on?

[ROM][11.0] WaveOS 4.1 Rasmalai for Redmi 3s [OFFICIAL][land]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WaveOS 4.1 - Rasmalai
WaveOS is an android custom ROM based on AOSP, focused on delivering a perfect blend of aesthetics, functionality and performance out of the box. The version 4.X is based on Android 11. Various optimizations and enhancements have been merged from CAF and upstream AOSP to maximize performance and battery backup, and improve OS functionality. We provide a unique and beautiful user interface out-of-the-box that's inspired by OnePlus' OxygenOS, and can be tweaked to your liking. We've also added handy features and customizations that improves user experience and proves to be useful at the end of the day, rather than bloating the ROM with unwanted features and customizations that could cause stability issues. We hope you like it! #NeverBetter
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
Head over to our full features list at GitHub
GApps included
What works?
Almost everything
What's broken?
Wifi-Display
You tell me!
ROM: https://sourceforge.net/projects/wave-os/files/rasmalai-4.x/land/
Magisk: https://github.com/topjohnwu/Magisk/releases
INSTRUCTIONS
Reboot to recovery
Wipe data, cache and dalvik if coming from another ROM
Format data if encrypted
Flash ROM (gapps included)
(optional) Flash Magisk
Reboot and voila!
Screenshots in post #2
Follow us on Twitter | Telegram
ROM and device sources: https://github.com/Wave-Project/
Kernel source: https://github.com/sairam1411/kernel_xiaomi_msm8937

Screenshots!!

@himanshu20 thank you for your work! Installing now, will update post using the ROM for some time!

Thanks for another option for our device.

Issues faced so far:
1.Encryption is not supported by this ROM, had to Format Data to install it.
2. Google Restore Setup wizard keeps crashing when I tried to restore data via cloud, to resolve the issue I had to install NikGapps Basic + PixelSetupWizard addon.
3. Style & Wallpaper package is missing and you would be stuck with OP's choice of theme only.
4. Icon pack support is there but whenever I tried to apply an icon pack, the launcher is adding padding to the icons to make it look circular, no option to set Icon Type to default.
Will be able to comment on battery and charging after couple of days of usage.

asifzbaig said:
Issues faced so far:
1.Encryption is not supported by this ROM, had to Format Data to install it.
2. Google Restore Setup wizard keeps crashing when I tried to restore data via cloud, to resolve the issue I had to install NikGapps Basic + PixelSetupWizard addon.
3. Style & Wallpaper package is missing and you would be stuck with OP's choice of theme only.
4. Icon pack support is there but whenever I tried to apply an icon pack, the launcher is adding padding to the icons to make it look circular, no option to set Icon Type to default.
Will be able to comment on battery and charging after couple of days of usage.
Click to expand...
Click to collapse
1. As mentioned in the installation Steps You need to wipe /data .
2. Flash '20210201' build from Sourceforge.

thank you for the rom, i really like it.
one issue i faced so far:
i am not able to shut the phone down.
not matter if i choose shutdown or restart, the phone automatically turns on again.

himanshu20 said:
1. As mentioned in the installation Steps You need to wipe /data .
2. Flash '20210201' build from Sourceforge.
Click to expand...
Click to collapse
Thank you for the new build.
However, wiping /data (partition) and Format Data are two different things which was not clear from the instructions.

I can't install the Magisk zip file from the Magisk manager!
It's because my phone reboots even after shutdown.
Is there any solution to that?

I need to root my phone ASAP!

heros2373 said:
I can't install the Magisk zip file from the Magisk manager!
It's because my phone reboots even after shutdown.
Is there any solution to that?
Click to expand...
Click to collapse
No issues here using latest magisk
kindly share boot logs when it keeps rebooting will check!!

UPDATE - WaveOS v4.1 is here!
WaveOS_land-R-v4.1-20210219-1001-OFFICIAL
Download: https://sourceforge.net/projects/wa....1-20210219-1001-OFFICIAL-signed.zip/download
Source Changelog:
https://raw.githubusercontent.com/Wave-Project/stuff/main/changelog.txt
Device Changelog:
• Fixed crash on google restore in Setup
•Updated GPS blobs
•Increase headset and mic volumes
•Device Won't Power Off issue is no more..
Screenshots - will be attached soon.
Cheers and #NeverBetter!

When I'm trying to install it on my device it says "This package is for land. Your device is ."
I own a Redmi 3s Prime.

wick1996 said:
When I'm trying to install it on my device it says "This package is for land. Your device is ."
I own a Redmi 3s Prime.
Click to expand...
Click to collapse
Update your recovery to the latest version

Hello Devolopers I am using this rom on My redmi 3s (2gb). The previous version rom was so smooth and It had no charging issue but I yesterday installed latest 4.1 build and my device charging shows " charging Slowly" it wont charge not a % for like hour
please help me with this
Regards

UPDATE - WaveOS v4.3 is here!
WaveOS_land-R-v4.3-20210418-2015-OFFICIAL
Download: https://sourceforge.net/projects/wa....3-20210418-2015-OFFICIAL-signed.zip/download
Source Changelog:
https://raw.githubusercontent.com/Wave-Project/stuff/main/changelog.txt
Device Changelog:
- Update Audio Blobs to LA.UM.9.6.2.r1-03600-89xx.0
Update audio_configs from LA.UM.9.6.2.r1-03600-89xx.0
- Switch to Aosp Telephony
*Fixes SMS on Jio4g and other LTE
- Set lmk minfree parameters as for RAM variants
- Kernel Improvements by @sairam60
-Misc bug fixes

Thank you ! I just installed it today the last version WaveOS_land-R-v4.3-20210418-2015-OFFICIAL-signed on my Redmi 3s land and it working pretty well, no battery draining !
For futures update do I have to flash the new update (like a fresh install)? Or I will have the update through the OS (in update section) ?
Thank you

Camillot said:
Thank you ! I just installed it today the last version WaveOS_land-R-v4.3-20210418-2015-OFFICIAL-signed on my Redmi 3s land and it working pretty well, no battery draining !
For futures update do I have to flash the new update (like a fresh install)? Or I will have the update through the OS (in update section) ?
Thank you
Click to expand...
Click to collapse
There is no OTA Updater as of now, you can try dirty flashing updates but if any issues occur kindly do clean flash
#NeverBetter

Is there an easy way to remove gapps?
If we can have a "no gapps" version, that would be much much appreciated

Can i use googlepay ?

[ROM][13][OFFICIAL] PixelOS [AOSP][STABLE][RMX2020]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies. We aim to provide an experience similar to Google Pixel phones with numerous performance enhancements and a small amount of useful additional features.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Our Featurelist
Device Specific Issues:
None
Requirements
Realme UI 1.0 A77 FW
Downloads
Get the latest PixelOS Build for RMX2020- Download
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
Recovery https://pitchblackrecovery.com/rmx2020/
PixelOS Recovery https://sourceforge.net/projects/pixelos-releases/files/twelve/RMX2020/recovery/
Note: GApps are included, don't flash separately.
Notes
• Encryption is enabled by default
• SELinux is enforcing
Flashing Instructions
Clean flash (coming from a different ROM):
• Download ROM from the link above
• Download Magisk v23.0 or newer (optionally)
• Reboot to recovery
• Format data
• Flash ROM zip
• Reboot and voila!
• To get root access, reboot to recovery after ROM setup and flash magisk.
Updating to a newer build (dirty flash):
• Flash ROM zip and magisk (optional)
• Wipe cache and dalvik (optional, recommended)
• Reboot and voila!
Read our blog https://blog.pixelos.net
Join our Telegram Group https://t.me/PixelOSChat
Buy me a Coffee https://paypal.me/*
Help translate PixelOS https://translate.pixelos.net
Source Code
PixelOS: http://github.com/PixelOS-AOSP
Device Tree and Vendor Tree: https://github.com/PixelOS-Devices
Kernel Tree: https://github.com/ArrowOS-Devices/android_kernel_realme_RMX2020
ROM OS Version: Android 13.
ROM Kernel: Linux 4.14.x

Reserved

Do I have to relock the bootloader, flash back to stock and upgrade the firmware to A.77 though? I am using ArrowOS 12.1 on my C3 atm.

blakegriplingph said:
Do I have to relock the bootloader, flash back to stock and upgrade the firmware to A.77 though? I am using ArrowOS 12.1 on my C3 atm.
Click to expand...
Click to collapse
Nah...just flash like other roms

sarthakroy2002 said:
Nah...just flash like other roms
Click to expand...
Click to collapse
Yeah but the stock ROM I had before flashing ArrowOS was an earlier build.

blakegriplingph said:
Yeah but the stock ROM I had before flashing ArrowOS was an earlier build.
Click to expand...
Click to collapse
oh.. well it should be fine af..no issues

Can it work on C35?

MumboTheDumbo said:
Can it work on C35?
Click to expand...
Click to collapse
no

hi, I wanted to apologize in advance that maybe a little off-topic. I wanted to install PixelOS, but I was stuck on unlocking the boot loader. My phone is realme C3 RMX2020 ver. A.77. And I can't install any "DeepTesting". Could someone recommend a current tutorial uploading TWRP, which works on A.77?

I had to rest a bit to understand how to install "DeepTesting". After unlocking the bootloader, it was easy to I did not think that Android 13 would be so propely on this phone For half a year I was struggling with the no longer supported Android 10 and I wanted to smash this phone against the wall, but instalation this rom extended his life
I wanted to ask something else, on the website pixelos.net I read
Updating to a newer build (dirty flash):
Update via OTA Updater, or
Wipe dalvik and cache (optional)
Flash ROM zip (sideload)
Reboot and voila!
Does this mean that this rom will get updates via OTA? Will I have to manually update it through recovery?
P.S.
At the moment I have noticed two bugs
- The second SIM card does not work
- When disconnected from bluetooth headphones, no sound appears on the phone (The problem with the lack of sound occurs when I turn off the headphones. When I hang up on phone, is all ok)

max95100 said:
I had to rest a bit to understand how to install "DeepTesting". After unlocking the bootloader, it was easy to I did not think that Android 13 would be so propely on this phone For half a year I was struggling with the no longer supported Android 10 and I wanted to smash this phone against the wall, but instalation this rom extended his life
I wanted to ask something else, on the website pixelos.net I read
Updating to a newer build (dirty flash):
Update via OTA Updater, or
Wipe dalvik and cache (optional)
Flash ROM zip (sideload)
Reboot and voila!
Does this mean that this rom will get updates via OTA? Will I have to manually update it through recovery?
P.S.
At the moment I have noticed two bugs
- The second SIM card does not work
- When disconnected from bluetooth headphones, no sound appears on the phone
Click to expand...
Click to collapse
everything is fine af here... also ye.. u will get ota updates on the rom.. just use pixelos recovery

sarthakroy2002 said:
everything is fine af here... also ye.. u will get ota updates on the rom.. just use pixelos recovery
Click to expand...
Click to collapse
Thanks Good job
Fact, both SIM slots work, unfortunately if i have to configure it to work SIM this ROM does not detect it
I use an additional SIM card for the Internet, which needs to be configured. Phones in which you can manually turn on and off the SIM card in the settings recognize this card to me, on this ROM unfortunately not.
As for the fading of the sound after disconnecting from bluetooth headphones, the problem arises if the disconnection occurs from the headphone (Turning off the headphones / no power on the headphones). If I disconnect with the headphones on my phone, it's all ok
but thank you anyway for resurrecting and developing this two-year-old phone

GPS is not working (please fix it in next builds)

After installing this rom my phone suddenly turns of and then reboots to recovery mode automatically. If I try to reboot my phone from the custom recovery it again reboots into custom recovery. What is the problem?

Sajibul032 said:
After installing this rom my phone suddenly turns of and then reboots to recovery mode automatically. If I try to reboot my phone from the custom recovery it again reboots into custom recovery. What is the problem?
Click to expand...
Click to collapse
Bro, Reset ur phone and flash ROM again and then reboot it

pateldevansh008 said:
Bro, Reset ur phone and flash ROM again and then reboot it
Click to expand...
Click to collapse
Already did that. But it's still not fixed.

Things that don't work
- Dual sim not supported
- Only one Google Account can be added.

I don't know if this is a bug either. I can't set another wallpaper with the highest sharpness. It looks like a loss of image quality.

sarthakroy2002 said:
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies. We aim to provide an experience similar to Google Pixel phones with numerous performance enhancements and a small amount of useful additional features.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Our Featurelist
Device Specific Issues:
None
Requirements
Realme UI 1.0 A77 FW
Downloads
Get the latest PixelOS Build for RMX2020- Download
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
Recovery https://pitchblackrecovery.com/rmx2020/
PixelOS Recovery https://sourceforge.net/projects/pixelos-releases/files/twelve/RMX2020/recovery/
Note: GApps are included, don't flash separately.
Notes
• Encryption is enabled by default
• SELinux is enforcing
Flashing Instructions
Clean flash (coming from a different ROM):
• Download ROM from the link above
• Download Magisk v23.0 or newer (optionally)
• Reboot to recovery
• Format data
• Flash ROM zip
• Reboot and voila!
• To get root access, reboot to recovery after ROM setup and flash magisk.
Updating to a newer build (dirty flash):
• Flash ROM zip and magisk (optional)
• Wipe cache and dalvik (optional, recommended)
• Reboot and voila!
Read our blog https://blog.pixelos.net
Join our Telegram Group https://t.me/PixelOSChat
Buy me a Coffee https://paypal.me/*
Help translate PixelOS https://translate.pixelos.net
Source Code
PixelOS http://github.com/PixelOS-AOSP
Device Tree and Vendor Tree https://github.com/PixelOS-Devices
Kernel Tree https://github.com/PixelOS-Devices/kernel_realme_RMX2020
ROM OS Version: Android 13.
ROM Kernel: Linux 4.14.x
Stable Release Date: 16 Nov 2022
Latest Release Date: 16 Nov 2022
Click to expand...
Click to collapse
The clock app and gboard app ain't working

17-Apr-2023
- Update Audio HIDL to 7.1
- Added 4G Carrier Aggregation (4G+) Support
- Upstream Kernel to 4.14.311
- Load fpsgo kmodule at boot
- store TaskSnapshot in 16 bit pixel format to save memory
- Force HWC copy for virtual displays
- Enable MAC randomization
- Update few MTK IMS blobs from RMX2020 A11 and Provide a proper shim for libsink
- Refactor and Fixup RealmeParts
- Fixed WPA3 related bootloop

Database Info

welcome